Over 1 million tech questions and answers.

Server info for netscape

Q: Server info for netscape

I am currently using windows xp, and dsl. I just downloaded incredimail to write emails and recieve them. I am not able to recieve emails but can send them. When someone writes back it goes to my verizon account as that is what the server information is on incridimail.

I normally use netscape for my email address and would like my recieving emails to come back at incredimail however, when I try and configure netscapes server info I don't know what it is or how to obtain it without paying for there tech help.

Is there another way to get netscapes server info? I have dsl thru verizon and they just got me registered so now whenever I send emails from the incredimail account, anyone answering these go directly to the verizon email account and ZI want them to come in thru incredimail. I have searched everywhere on both sites and still cannot configure this mess.

Thanks for any help

Preferred Solution: Server info for netscape

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Server info for netscape


Welcome to TSG!

If I understood you correctly, you want to configure your Netscape email account in Incredimail. If memory serves me well, it is very similar to setting up in Outlook Express. Use the directions from the link below to setup your Netcaspe account in Incredimail.


Read other 2 answers

Why can I not change the mail server info in Netscape 4.7 - the fields are greyed out

A:Netscape server info greyed out

Have you set up the identity tab, that must be completed before the mail option is available.

Read other 1 answers

My Netscape is a bit complex going from 4.77 to 7.1.

I have old mail and sent files I have kept but not exactly sure how to move them into 7.1 and they didn't automatically. It's over 500meg info.

I moved them with Win Explorer and got them as a subdirectory of NS 7.1 but they don't show up in the mail program.

Any thoughts? Thanks!

Read other answers

Hi, for some unknown reason all my program files got moved into my Quicken prgm last week, I thought I had succesfully moved them back, however when I launched my Netscape Communicator 4.7 it brought up the "mail & newsgroup" setup wizard! I found a stray Netscape NEWS file still in Quicken, I tried to paste it in Netscape. The problem is, I'm not sure its the one with all my address book or user info, and it still didn't work. I have a feeling I have to delete a new file and replace it with the old one somehow....anyone one know what the file name is that has all my address book and info in it? and where it belongs in Netscape?....help!

A:Netscape Comm 4.7 address book & info lost!

The address bookfiles are .nab and .na2. If you do a search on your machine and find them just copy and paste back into netscape

Read other 2 answers

Anybody ever come across this? When I enter www.netscape.com in the location field, I get back a message "Your browser has sent a message this server does not understand." This also happens even when I click on Netscape's "Downloads" link on one of their other pages. Any ideas?

A:Netscape/server problem

Are you on a network that uses a Proxy Server?

Read other 2 answers

When trying to start the NES service I get "Unable to find specified file". Registry entry points to the folder were the file exsists (i.e. ns-httpd.exe). Any thoughts?

A:Netscape Enterprise Server v3.6


Welcome to TSG

I don't have a answer but you can look and or post over here.



Read other 1 answers

I have Win 95 with Netscape 4.75 when trying to download from microsofts download site a Netscape dialog box comes on screen with "Netscape is unable to locate the server download.microsoft.com Please check the server name and try again.Anyone know how I can get Netscape to locate the server?Thanks for any help offered.

A:Netscape unable to locate server

Assuming you have a good internet connection (meaning it's connecting/downloading from everywhere else ok)... there's nothing you can do about that error. It's Netscape's way of saying the page or file does not exist.

In light of the recent Microsoft "hacker" problems, I'm sure it will work if you go back and try again now. Especially if it was one of Microsoft's direct links. There was a period of 3 days where nobody was able to get anything from any of Microsoft's sites. Should be okay now...

Oh yes, one more word of advice. Microsoft doesn't like it when users go to their site with Netscape. I mean that only IE sees certain download items/buttons in their pages. Perhaps it's their way of feeling superior, or they use certain browser plugins not found in Netscape... so just use IE whenever trying to download anything from Microsoft, especially automatic updates.

[This message has been edited by rh71 (edited 02-02-2001).]

Read other 1 answers

Since the last part of last month (may 2005) I can't receive my netscape webmail via the netscape imap server using "netscape mail and newsgroups."

Every time I try to get my mail, I'm greeted by "Failed to connect to server imap.mail.netscape.com"

Nothing has changed in my setup. I can, however, receive my mail by signing in from netscapes site.

Any thoughts?

Thanks in advance,


A:Trouble with netscape's IMAP server

Hi all,

Just thought I'd let you know that I seem to have sorted the problem, took a funny route though!

It happened by mistake, after filling the relevant details within Netscape mail and newsgroups. The last thing to enter, if my memory serves me right is the name you want to appear on your outbound mail. After doing this, I clicked on the cancel button of the following "please wait" dialog. Hey presto - It started working!

This is obviously a bug with the Netscape mail and newsgroup software. Just thought I'd post this in-case anyone else has the same problems.

Matty (www.matfrygbr.co.uk)

Read other 1 answers

I was setting up a new computer on our network, and I can't get Netscape to work through our Proxy server. In the same day this problem also erupted on another computer here.

When you try to open a page, it asks for Proxy authentication (which is new and unusual). If you cancel it, you get a 407 error (Proxy Authentication Required). If ou do fill in a password, the bar at the bottom blinks rapidly between "Connect: contacting host" and "Connect: Host (whatever domain) contacted. Waiting for reply." After a long time of this, it'll switch to the same 407 error.

We had this problem once before, and a network guy was called in and fixed it in about 5 minutes, but I don't know what he did. Any ideas?

A:{Solved} - Netscape and my Proxy Server

Read other 6 answers

Hi guys:

We have 3 computers connected to a hub forming a LAN using a DSL modem for shared internet access. One of the computers is a server and the other 2 are clients. A few weeks ago, one of the clients began receiving a recurring message: "Netscape unable to locate server xxxx" (the x's represent any website). Prior to a few weeks ago, no problem. We have attempted just about every trick in the book (reinstalling Netscape, removing and reinstalling everything in "Network", checking TCP/IP stacks, etc.). You name it, we tried it. We are using Internetshare's "All_Aboard" software. We've corresponding with them on numerous occasions, but they have no answers. We've browsed Netscape's online knowledge base at: http://help.netscape.com/ with no luck. What are 3 perplexed techies to do? As we said, only one client on this small LAN is afflicted with that dreaded error message. If someone has asolution, he/she will be given an all-expense paid vacation to the Bill Gate's estate. (just kidding) Seriously, any ideas are greatly appreciated.

Thanks in advance.


Did you try reinstalling the NIC on the client? Are you running NT/2000? If so, how is the administration set up? Was there one point in time a few weeks ago when it suddenly stopped finding the server? Where or what was the client doing? Or just out of the blue one morning when user logged in?

The Don

To all who pass through, instead of around, the journey makes the end very sweet indeed.

Read other 3 answers

Recently we decided to purchase a small number of Office XP liscenses to test and evaluate before deciding to outlay the cash to upgrade the organization. I, being the network administrator, am one of the Guinea Pigs.

We use Netscape Messaging Server. When I upgraded Outlook, I found that I can no longer use our ldap address server to look up addresses. I recieve the following message in a pop-up box:

Insufficient Rights to Browse the Directory.

Then I recieve a pop-up stating: The action could not be completed.

This only happens in Outlook 2002. If I uninstall it and go back to Outlook 2000, I don't have this problem. Neither does Mozilla 0.9.5 or OE 6. Only Outlook 2002.

Anyone have any idea what I need to change to be able to correct this?


A:Netscape Messaging Server and Outlook 2002

Hope this helps

To resolve this behavior, connect to the Internet or to the network that the LDAP directory server is on.

To work around this behavior, change the order of the e-mail accounts:

In Outlook 2002, on the Tools menu, click Address Book. The error may appear when the Address Book dialog box opens.
Click the Tools menu, and then click Options.
Change the option under Show this address list first to be an address book other than the LDAP directory.
Under When sending mail, check names using these address lists in the following order, move the LDAP directory to the bottom of the list by selecting it and clicking the down-arrow.


Read other 3 answers

I have win 95 with Netscape Communicator 4.75 and Earthlink 5.0 for my web usage.When I click my Netscape icon to get on the web a dialog box appears with the statement "netscape is unable to locate the server www.earthlink.net please check the server name and try again." To get on the net I have to click the earthlink icon to get on the web.I use to always be able to get on directly with Netscape.How can I correct this situation and get on the web by clicking my Netscape icon? Thanks for any help rendered. sincerely,Lowell Rose

A:Netscape is unable to locate the server www.earthlink.net

it could be possable that earthlink has changed there web page. Is earthlink set as your home page? if so try some other webpage like yahoo to see if it the site or your computer.

Read other 2 answers

I have a network connected to cable modem on a server. I had to reinstall Windows 98 on a couple of the workstations.
The proble is that I can't seem to get Eudora, Netscape, or Outlook Express to realize that I'm actually connected to the Internet. IE works fine and I can't figure out What the problem is.
I've checked all my settings on these programs and they all seem appropriate. Is the problem possibly on the server side?

A:Eudora, Outlook Express and Netscape can't find the server but IE can

Did you put in the Gateway and DNS address for the server that you are using for your gateway?

Read other 3 answers

I have a IMAP mail server set up in the Netscape messenger as my default account. When I go to add another type of mail server, lets say POP3, it doesn't shows me the option of changing the type of mail server from the dropdown menu; rather there is just IMAP Server already in the mail server type.
There is an option of changing the type of mail server when creating the 1st mail server account from the dropdown menu.
Can anybody help me on that.

A:Pop3 Option Not Shown When Adding Mail Server In Netscape 4.77

Don't you have to create another profile for each email account in Netscape??
Have you tried that and can't change the type of mail server?

Read other 2 answers

I am setting up a second computer and putting it online with mine. I am to the question of DNS server. I don't know what that is, other than it is numbers and can't find it anywhere. Please tell me where to look in my running computer for the information. rreeset

A:where is DNS server info. in my pc?

What's the OS?


Start - Run - type "cmd" and press Enter.
Type "ipconfig /all" and press Enter.
You will see your DNS Servers.


Start - Run - type "winipcfg" and press Enter.
Click "More Info".

How are you setting up your network? If you are using a router, why not use DHCP?

Read other 1 answers

I am setting up a second computer and putting it online with mine. I am to the question of DNS server. I don't know what that is, other than it is numbers and can't find it anywhere. Please tell me where to look in my running computer for the information.

A:where is DNS server info. in my pc?

Hi, You double posted, we ask that you only work with one thread please for the same problem> It was probably just a miscue, I am closing this unreplied to thread for you.

You are getting help here:


Read other 1 answers

I have two old HP5 (parallel port only) printers that are just wonderful. They are the absolute cheapest to operate at less six-tents of a penny a page and more dependability could never be expected from any device. I've been looking at print servers, the internal one made especially for my printers and other external ones made to work with any parallel port printer.

My last experience with generic (those not made for a specific printer) print servers was that they would run out of memory and quit a print job at the point the buffer was full. For that reason, I sort of considered them second rate parts and never used them again. That was about 7 years ago.

Occasionally, I will send 200- to 500-page print jobs to the printer and it prints it just fine, start to finish without a hitch. If the print servers still suffer from this buffer problem, I don't want to waste my time finding out the hard way.

Question: Do today's generic print servers from reputable companies like Linksys, Netgear, etc. still suffer from these buffer problems, or have they solved that?

A:Print Server Info Please

Hmmm . . .

Read other 3 answers

Hello- someone was speaking to me about e-mail servers and mentioned SMP traps. Could someone provide a little information to me on smp traps?

Read other answers

I have Outlook '97.
"No transport provider was available for delivery to this recipient." is the error message I keep getting.
I believe I entered the wrong "incoming" and "outgoing" server addresses.
Where would I go to enter the correct POP and SMTP addresses? Thanks

Read other answers

just incase anyone was having trouble with the updater.....this is why.
Server has moved.
At about 8 p.m. (GMT+2) yesterday, the main server (security.kolla.de) was no longer reachable, displaying a 404 error. The integrated update function wasn't working either.

The reason for this was that my webspace provider moved the pages to a new server, most probably because of over a million page hits yesterday. This (unannounced) move was finished at midnight according to their information, but until the page is available again there may be a delay of up to 24 hours.

I'm sorry for any inconvenience this has caused (I was as surprised as everybody else). Still waiting for an explanation from them why they did this without speaking with me first, and without keeping the old pages online until all DNS have the new IP.

P.S.: because security.kolla.de was not available, many visitors tried security.kolla.com instead. Due to the high amount of Spybot-S&D visitors, the owner of kolla.com was kind enough to forward the kolla.com addresses to this site temporarily. But if you want to bookmark this page, please open http://security.kolla.de/ and bookmark the correct page.


A:Read! Spybot S & D Server Info


That "news" dates from about one month ago, 04/24/2003, to be precise...

Read other 2 answers

Helping out a buddy of mine set up four windows 7 machines that will be linked up to windows server 2003. The server will simply need to store and access data bewtwen each and every computer.

I'm extremely tech savy when it comes to setting up home networks, individual pc's printers/fax etc., but this is going to be my first server job in hopes of saving my freind some $$ from hiring a real IT man.

So I was wondering if there's a guide on how to set up the server and link the computers to it since this will be my first endevour...

Any tips links or knowledge are EXTREMELY APPRECIATED..

So where do I start?

A:Help/info setting up server with w7 machines.

Quote: Originally Posted by SevenNerd

So where do I start?

You could start with giving us the necessary info, like is he going to run a domain with AD or will this be a workgroup setup? Is the server's only role going to be a file server? If so, there may be better options than a 2003 Server. Are the computers all local to the server?

Read other 8 answers

I will attempt to be as clear and concise as possible. The situation is that a company is being purchased by another company. Company A is being asked for information by company. Company B wants all of the information required to remotely access company A's servers as soon as the transaction is completed. The problem is company A no longer has IT support or even anyone onsite who is capable of providing this information. Company B has specifically requested a domain password. I have been given this responsibility because I am the closest thing they have to support. I have established remote access between personal computers in the past. But never a company server. How can I direct those onsite through the process of accessing the required information from their servers and then possibly setting up a vpn or remote test to make sure it works? Is a domain password all that company B will require to remotely access servers and network of company A?

Read other answers

Windows 98 - Juno - Internet Explorer 5.0

I am trying to configure a program called new mail which when I dial up using Internet Explorer notifies me of incoming mail while online. I need to input the server address for my mail but unsure what it is or where to find it. The only thing I found Internet options>connections>settings>properties>server types was Juno: Juno Online Services PPP - this didnít work,can anyone help

A:email notification - need server info

Read other 13 answers

My first and last experience with a print server was with a small, cheap one that would not handle jobs over about 30 pages. If you gave it a 200-page job, well, it would just quit after about 30 or so pages.

I have an HP5 printer in my office connected to an always-on computer. Well, occasionally, I would like to turn that computer off or maybe go into DOS mode to play around with things there. That makes the printer unavailable to the rest of the network. I would like to use a print server; but, I don't want to run into that print server's memory barrier when I want to print a 400-page document.

I admit that beyond the knowledge of a print server's intended basic function, I know almost nothing about them.

Any suggestions or knowledge anyone cares to impart would be appreciated.

A:General Print Server Info Needed

Read other 6 answers

I am trying to set up a DHCP server, I need to know what other services are required along with DHCP example: WINS, DNS, ,etc.. Also what protocols to install besides TCP/IP. I tried NetBEUI and was able to log into the server with my laptop and a crossover cable, but when I use only TCP/IP it says there is no domain to verify my log in. But when I was able to log in the IP address was the same on every login, it was something like 169.???.???.???. Also when connecting a hub do I need to have some kind of serial connection from the hub to the server or just patch cables from the hub to the NIC cards. Thanks for the help.

(Message from Reuel: Just cleaning up the ALL CAPS off)
[This message has been edited by Reuel Miller (edited 08-21-2000).]

A:{Advice Offered} - DHCP server & Hub info

I see Reuel hasn't gotten to this yet, so I'll give it a shot...
With my DHCP Server (PDC), I've got it with WINS, pulling the info from another site. Put WINS on there so you can resolve the computer names from the IP's...That way the only protocol you need is TCP/IP. If you're not getting your WINS info from somewhere else, you'll need to set up your lmhosts file. Put those settings on your server, add the new computer to your domain, then log on. If you've still got that 169.xxx.xxx.xxx do an ipconfig /release, then /renew from the command prompt, and I suppose that should be that.
As far as the connecting with the hub, I believe you can just run the patch cables from the NICs to it, if there is a switch for "normal" on the hub, go to that, not "uplink". Then again, I could just be talking out of my arse here.
But I honestly think the best thing to do is to try whatever Reuel has to offer...He's the man, in case you didn't know.

Read other 2 answers

I work in an office where Outlook reigns supreme. 
My manager has been overseeing multiple accounts via Outlook and it's not going well.  He constantly is replying using the wrong email account and causing quite a bit of confusion.  He NEEDS separate email clients to limit his own confusion.  So I figured he'd be better off have multiple email clients... Outlook having his personal main account, Thunderbird (or similar) with the other email account(s). 
Here's my issue, the company uses an in-house server for email.  I'm attempting to set up Thunderbird and it's asking for an Incoming  IMAP (or POP3) and Outgoing SMTP.  I'm not exactly sure of this and so far my guesses have been gone.  Just curious if someone knows where to get this info from through Outlook.
I've browsed Google, but every result is for an Internet Settings, not a Server Settings.
OS: Win 7 Professional 64bit
Program: Outlook 2010
Let me know if more info is needed. 

A:Obtaining Outlook 2010 Server Info

Since you are using an in-house email server, you will need to get that information from the IT department or whoever manages the in-house mail server.

Read other 3 answers


I need to know my motherboard information for a Compaq PL1600 6/450 (I think this website has it, I have a 450Mhz Pentium II processor http://h18000.www1.hp.com/products/quickspecs/10034_div/10034_div.html )

One thing is that I can not boot it so will not be able to use any programs that detect it automatically. I have a few serial numbers (which I have no idea how to read) and one picture I took (which I believe would only help if we had a small sample of motherboards to choose from.).

The boards are split in two (three if you count the small one that connects the two larger boards together as well as containing connections for the IDE cables and SCSI cables and power.)

The top board which has PCI, battery etc.. has a small white sticker with a bar code then some numbers and characters.

313621-001 P1167AC25HVRGG 007735-001
007736-000 Assembled in Singapore REV ACClick to expand...

Below is the bottom board's (with the CPU, RAM) white sticker similar to above.

313622-001 P138L0G25HVBYQ 007918-101
007919-000 Assembled in Singapore REV OGClick to expand...

Can I get the motherboard information from this?

A:need to know motherboard info: Proliant 1600 (server)

Read other 8 answers

I have a SOHO with several computers running XP Pro. I recently inherited a Lexmark MarkNet Pro 1 (sans installation CD, unfortunately), and I'd like to hook up my printer through this print server directly to my router so that the printer is available to any computer that is on. When I plug everything in, I can print a test page that shows the TCP/IP address of the printer, so I assume that part is working. But when I go to add the printer, the computer can't "see" the print server. In the Printer Wizard, I've tried browsing for the print server/printer, and I've tried entering the URL. I've also tried creating a standard TCP/IP port. All to no avail. I'm not a networking expert, and I think there must be some small key point that I'm missing. If anyone could point me in the right direction, I'd appreciate it.


A:Need basic info on setting up a Lexmark print server on XP Pro

Go to Lexmark and get the drivers etc. first:

When I installed my printserver (Netgear PS110), I had to first install the PS-driver on each PC. Then (re)install the printer drivers as a LOCAL machine, not-shared, and when it comes to selecting the printer-port, you select the network-port that has been installed by the PS-driver.

I assume that Lexmark won't be that different.

Read other 7 answers

Well I'm connected to the internet using PPPOE, which requires a username and password. So how do I fix this problem. IE is working fine, I can even access the Guide in Media Player, so why isn't it connecting to the server to update the album info?

Thanx to anyone who can help

A:Cannot connect to Microsoft server to Update Album Info in WM11


Read other 1 answers

Thanks for your time.

A very nasty program on site hxxp://translateclient.com claimed to be Google Translator, I downloaded from filefactory, which I thought scanned their files. It has invaded my computer changed my homepage, default search the whole 9.

“Client for Google Translate” referred to a toolbar (VisualBee) also installed (even though I denied it) and changed all my settings, numerous programs keep popping up. I want to make sure no trackers and malware were leftover and restore it to how it was a few days ago but keep the updates I’ve made to documents etc.
Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 12:33:21 AM, on 1/29/2013
Platform: Windows 7 SP1 (WinNT 6.00.3505)
MSIE: Internet Explorer v9.00 (9.00.8112.16457)
Boot mode: Normal

Running processes:
C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbamgui.exe
C:\Users\FBI Surveillance Van\Local Settings\Apps\F.lux\flux.exe
C:\Users\FBI Surveillance Van\AppData\Roaming\SearchProtect\bin\cltmng.exe
C:\Users\FBI Surveillance Van\AppData\Roaming\Dropbox\bin\Dropbox.exe
C:\Program Files (x86)\Evernote\EvernoteClipper.exe
C:\Program Files (x86)\Evernote\EvernoteTray.exe
C:\Users\FBI Surveillance Van\AppData\Local\Google\Update\\GoogleCrashHandler.exe
C:\Program Files (x86)\Roxio\OEM\Roxio Burn\RoxioBurnLauncher.exe
C:\Program Files (x86)\Evernote\Ever... Read more

A:Computer invaded possibly to steal banking info, Russian server

Read other 16 answers

Running Firefox, Netscape 7.2 and Netscape 8 on Wiudows 2000.

I have a bookmarks.html file, the same one being used by all browsers. It is jamming up my browsers--all of them. I can open and view the bookmarks.html file and view it as a web page and it looks all okay; but, if I place it where it should be and attempt to use it from the bookmarks are intended to be used, the browsers all jam on startup and will not display any web page.

The only way to close the browsers at this point it by using Task Manager.

A:Netscape bookmarks files jams up Firefox and Netscape

Sounds like your bookmarks.html file is corrupt for some reason.
Try and create a new profile in Firefox. If you don't have a problem, then slowly add your
bookmarks into the new bookmarks file. I don't use Netscape, so I can't help you there.

Read other 2 answers

I've recently instaled the Netscape 8 browser. I previously used Netscape 7.2. When I try to "Send Page" in Netscape 8 it tries to open Outlook (which I do not use) instead of my usual Netscape email program. Also, when I click a link in an email, it opens Netscape 7.2.

How can I get Netscape Mail & Netscape 8 browser to work together?


A:How to get Netscape 8 to recognize Netscape Email

Guess that if you go to the control Panel, internet options and then to the "programs" tab that it now has Outlook listed for your Email.
Should be able to pick Netscape 8 from the drop down there.

Not sure why a link opens Netscape 7.2.

Here is a site.



Read other 3 answers

Using a laptop [Dell, using WinXP Pro] at both the office and then when traveling, I have some files and folders in my C drive that I sometimes save there, and then also save onto my server drive [G], and vice-versa.

Is there a utility that can "mirror" or "synchronize" the files and sub-folders w/in designated folders of my choosing so that both sets [the C and the G drives] are both updated and then reflect the same files, etc.?

Yea, there is a Synchronize w/in the Tools of Windows Explorer, but that seems to be for a totally different purpose... What I would like is to do the above task w/ like a one or two button click, that would then take care of doing its function in the background.

Any ideas?


A:Utility to "synchronize" hard-drive files & folders w/ server info?

Check out Karen's Replicator

Read other 1 answers

I need the IP address ,DNS and gateway address so on .Is it possibile to get it from the modems DHCP or do I need the ISP DHCP working?

I'm setting up are home network and getting connected to the internet but the internet connection is down .But is it possibile that I can get this from the modem. .

Like how does the computer talk to the modem and the modem talk to the DHCP server .I never had this problem before.

A:Can you get DHCP info from the modem software even when the DHCP server is down

Read other 8 answers

I have IBM Aptiva computer, 733 MHz, 20 GB hard drive, 128 MB Ram.
I use Netscape 4.7 and Netscape 7.0. I use MailWasher for spam.
I have "remember password" checked in both. When I try to get my mail from Netscape
7.0, I am ask for my password and when I type it in, I receive my mail. When I
try to get my mail in 4.7, I am ask for my password, but when I type it in, I get
a message "invalid password" and I can't get my mail. I have Netscape 4.7
as my default browser. In MailWasher, I always change to the mail program that
I want to use before trying to get my mail. I'd like to know why both ask for my
password and why the password works in Netscape 7.0 and doesn't work
in Netscape 4.7 which is my default? Now, you ask, why do I use both? Well, each
has some things that I dislike and some things that I like, but one of the main reasons
is, I somehow lost my newsgroups in Netscape 4.7 and I can't resubscribe. When
I try to resubscribe, I keep getting a message to contact my provider, etc. I get
the newsgroups fine in 7.0. If I can get my newsgroups back in 4.7, I may decide
to uninstall 7.0. Know this is long, but, hope someone can help me. Thanks in

A:E-Mail Netscape 7.0 & Netscape 4.7


Are Netscape 4.70 and 7.0 both set up to go tru mail washer?

You can look here also.


Read other 2 answers


Using NS 7.0 and IE6 at present. Just downloaded NS4.08.
Will the two Netscapes conflict with each other, or can I use the browsers together?

Thanks for your help.

A:Is it OK to run Netscape 7.0 & Netscape 4.8 at the same time?

Read other 6 answers

On Windows 10 startup, Firefox (my default browser) opens and loads up this ad site. I've run malwarebytes to no avail but I did find the registry location of part of the problem (attached image). Deleting the registry fixes it only temporarily until it is added again. I'm not sure what program is creating it or how to fully stop it. Any help would be appreciated! Also, yes I do have some pirated games but these are purely for demo reasons as I always purchase after trying them, although I did not download any around the time this started happening.
FRST Data:
Scan result of Farbar Recovery Scan Tool (FRST) (x64) Version: 20-08-2016
Ran by Ariel (administrator) on ARIEL-PC (20-08-2016 17:14:08)
Running from D:\Ariel\Downloads
Loaded Profiles: Ariel (Available Profiles: Ariel & DefaultAppPool)
Platform: Windows 10 Pro Version 1511 (X64) Language: English (United States)
Internet Explorer Version 11 (Default browser: "C:\Program Files\Nightly\firefox.exe" -osint -url "%1")
Boot Mode: Normal
Tutorial for Farbar Recovery Scan Tool: http://www.geekstogo.com/forum/topic/335081-frst-tutorial-how-to-use-farbar-recovery-scan-tool/
==================== Processes (Whitelisted) =================
(If an entry is included in the fixlist, the process will be closed. The file will not be moved.)
(NVIDIA Corporation) C:\Windows\System32\nvvsvc.exe
(NVIDIA Corporation) C:\Program Files (x86)\NVIDIA Corporation\3D Vision\nvscpapisvr.exe
(NVIDIA Corporation) C:\Program Files\NV... Read more

Read other answers

Now I know that this topic has been posted recently as well, but I haven't been able to clear it myself, unfortunately. When I launch Win7 Chrome boots with a website (sd-steam.info ) that directs me to zodiac-game.info. I've looked through my reg files and found on Run > there is a file under my user name stating ''explorer.exe st-steam.info''. Deleting this helps, but temporarily as it always comes back shortly after
( it seems to come back when a black /cmd/ screen pops up for a slight second ). Restoring my pc to a point prior to the downloads didn't seem to help either. I've a few pirated games on this pc, but nothing too recent. I hope it won't cause an issue that the reg file under Run has been deleted ( in hopes of repair ).

Scan result of Farbar Recovery Scan Tool (FRST) (x64) Version: 21-08-2016 01
Ran by Antea (administrator) on ANTEA-PC (22-08-2016 22:37:18)
Running from C:\Users\Antea\Downloads
Loaded Profiles: Antea (Available Profiles: Antea)
Platform: Windows 7 Ultimate Service Pack 1 (X64) Language: English (United States)
Internet Explorer Version 8 (Default browser: Chrome)
Boot Mode: Normal
Tutorial for Farbar Recovery Scan Tool: http://www.geekstogo.com/forum/topic/335081-frst-tutorial-how-to-use-farbar-recovery-scan-tool/
==================== Processes (Whitelisted) =================
(If an entry is included in the fixlist, the process will be closed. The file will not be moved.)
(NVIDIA Corporation) C:\W... Read more

Read other answers

Greetings friends! Can someone please help us remove this "SD-Steam.Info" problem that's on our computer? This is what happens.
-> Upon turning on the computer, a browser will open up leading to "SD-Steam.Info" or sometimes "Zodiac-game.info" site.
So far the temporary solution that we were able to come up with was block SD-Steam.Info and Zodiac-game.info via the host files. Because of this, even if something tries to open the browser (we use Chrome), it would only display a blank page and go nowhere. 
Unfortunately, whenever we use Malwarebytes to remove it, the redirecting problem comes back and gets detected after restarting the pc. In other words, it somehow still manages to resurrect itself or re-create itself. 
We also tried deleting the entry of SD-Steam.Info from the registry via regedit, but just like before, it keeps coming back everytime the computer's restarted.
Someone suggested "Farbar" and from what we've seen, that one seemed to work with others who have this similar problem. Unfortunately, since Farbar is new to us, we don't know how to properly use it and we don't want to mess with it. Can you please help us use Farbar in order to eliminate this redirecting problem?
When we looked at the FRST.txt file, we noticed this -> HKU\S-1-5-21-1284101226-3653657755-2602753855-1001\...\Run: [GrandmaPC] => explorer.exe hxxp://sd-steam.info <===== ATTENTION   while in the Addition.txt file, we foun... Read more

Read other answers

i know people this topic has been recently posted alot and i am having the same issue using windows 10 i am being redirected to zodiac game info on every boot cycle. I have used everything mbam ,adwcleaner, rogue killer everything ..saw through my reg files got a registry under my username "explorer.exe st-steam.info" deleted this still its coming back please help

Read other answers

Hello everyone,
When my system finishes to turn on, google chrome opens itself with all my tabs of my last session and a new one with sd-steam.info web, then it changes the link into zodiac-game.info.
I hope you can help me, Thanks a lot!

Read other answers

This has happened a few times over the last several weeks. But it only happened after I had clicked on a picture from a google images search result though.
The first view times I was redirected to filestore72.info (the word 'download' was in the link but I do not remember it). And last night it happened again. I was redirected to ad.leadbolt.net and url123.info popped up as well. Again, this only happened after I clicked on a picture from a google images search result and it hasn't happened since.
I don't think it downloaded anything but I'm scared that it might have. What should I do?

A:Google search redirected (filestore72.info, url123.info)

Welcome aboard  Which browser is affected?  Download Security Check from here or here and save it to your Desktop. Double-click SecurityCheck.exe Follow the onscreen instructions inside of the black box. A Notepad document should open automatically called checkup.txt; please post the contents of that document.NOTE 1. If one of your security applications (e.g., third-party firewall) requests permission to allow DIG.EXE access the Internet, allow it to do so.NOTE 2 SecurityCheck may produce some false warning(s), so leave the results reading to me. Please download Farbar Service Scanner (FSS) and run it on the computer with the issue.Make sure the following options are checked:
Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdateWindows DefenderOther ServicesPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply. Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Devices (do NOT change any settings here)List Users, Partitions and Memory sizeClick Go and post the result. Download Malwarebytes' Anti-Malware (aka MBAM): http://www.malwarebytes.org/products/malwarebytes_free to your desktop.* Double-click mbam-setup.exe and follow the prompts to install the program.* At the end, be sure ... Read more

Read other 12 answers

Just for reference purposes

For those who are interested in viewing the status or tracking of Windows 10 & Office with respect to builds, packages, official updates, ESD's, etc., you can visit the following page via the link below.

I did not post any links from within each section as shown in the table below. Visit the site to explore the goods and track the status of the components shown. It is updated in real time as needed.

For more info and downloads: http://ms-vnext.net (Link fixed)

Next possible Windows Insider builds (current preview branch is fbl_impressive):
Canary ring: 10.0.10159.0 OSG ring: 10.0.10158.0 External ring: ? Detailed flighting information Windows 10 ESD Database

Currently 14,693 ESD files in the database.
Last checked for x86 ESDs 1 hour and 21 minutes ago.
Last checked for x64 ESDs 40 minutes ago.
Last updated 38 minutes ago.

... Read more

A:Win 10 & Office Build info, tracking, downloads, win updates - Info

No new build has popped up ever since.

Read other 1 answers

Is this some new kind of malware that everybody is reporting here and how does it even spread ? (I wanna know more about it.)

A:What is it with this sd.steam.info / zodiac-game.info thing recently ?

I started experiencing it today, dno how it happened though. You can read the rest on my post: http://www.bleepingcomputer.com/forums/t/624666/sdsteaminfo-virus-need-help-fast/

Read other 1 answers

Yesterday I bought a new mother board for my PC my Processor model is AMD Athlon II X3 440 Triple Core Processor, but after changing Mother Board in system information it's showing my Processor as AMD Phenom II 4 B40 four core processor. I don't know why it is showing like this. Is this dangerous for my hardware? I used AM2N68-AM PLUS before and now I changed M5A78L-M LX. Except this every thing else is perfect.

A:Processor info is showing wrongly in system info after changing MB

It's not dangerous, but I believe you can get it to display correctly. All you have to do is open Device Manager, right-click each entry for the CPU and choose Uninstall. When you're finished, reboot and then open Device Manager up when it's done rebooting and check the CPU again. It should be showing up correctly after that, but if not then we'll go from there.

Read other 9 answers

When I start up my computer an IE window opens up with zodiac-game.info URL. I tried deactivating sd-steam.info in the Windows Startup window and deleting it from the registry but after starting up the computer twice it appears again. I've left everything untouched again, both the registry and the Windows Startup process and ran farbar recovery scan tool. I hope you can help me out, thanks.

 Addition.txt   53.27KB

 FRST.txt   33.7KB

Read other answers