Over 1 million tech questions and answers.

Wi-fi problem in Levono G470

Q: Wi-fi problem in Levono G470

Hello everyone. I have a Lenovo G470 laptop, i'm having few problems with wireless connection.Some months ago I was using normally my laptop and then I had a internet problem, so I tried to disable my adapter in network connections and then it has dissapeared from my connections.. Then I tried to look on Device Manager in Network Connections tab, my driver was gone.. I already tried everything.. Actually, I'm using Usb wi-fi for using internet on it and Lan cable. 1. Tried to reinstall my wi-fi driver.2. Tried to enable on bios.3. Installed Fn+f5 thing, ps: It only shows up Bluetooth... Also in Windows Mobility Center has no wi-fi to enable.4. Turned on wireless key in left side of laptop, no results.. 5. And last thing, reinstalled windows like 2-3 times, and still no wi-fi.. I really don't know what is happening with my wi-fi, I'm tired to search in a million sites for fixes and no one worked.. So I'm posting this if someone could help with this problem. PS: Sorry for bad english, my main lang is portuguese

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Wi-fi problem in Levono G470

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 57.6

Laptop Lenovo G585 2181
OS Windows 8 Upgraded to 8.1
Symptoms;
When the machine is powered on all that appears on the screen is the Levono splash screen and a dotted circle going round and round for about an hour. Eventually a blue screen with an error message appears “Could not access a component …” or words to that effect. Insert USB or Media. Which I do not have and consequently cannot start in Safe Mode as I cannot get to msconfig!
It gives a choice to
Press Enter to try again which just repeats the same splash screen all over again.
Press F8 which just repeats the same splash screen all over again.
Press ESC to enter Setup Utility
The only thing I have been able to do is enter InsydeH20 Setup Utility where the boot sequence is BOOT Mode [UEF I]
USB Boot [Enabled]
Any help with this would be most welcome!                                                                              

A:Serious problem with starting Levono G585 Win 8.1 laptop!

When Windows 8 shuts down it does not really shut down like Windows 7. It a hybrid shutdown in order to create a faster boot. See if the following works for you.
 
Hold the Power Button for 5 seconds or until the computer completely shuts off.
Press the Power Button to turn the computer on.
As soon as you see the rotating loading circle, press and hold the Power Button until the computer shuts off.
Repeat this process 2 or 3 times until you see the Preparing Automatic Repair screen.
By powering on and off you might be able to get to the Automatic Repair screen.

Read other 12 answers
RELEVANCY SCORE 57.6

I have 2 IBM Levono R52 1860 Laptops, both are running windows XP Pro, one has Intel PROSet Wireless WiFi that works perfectly. I installed PROSet Wireless on the other one and it won't work. It tells me that the network driver is not installed.... If I go to C:/programs, etc. the driver is in the folder....Help please?? in device manager under Network adapters it shows Broadcom NetXtreme Gigabit Ethernet( which won't connect to my WiFi either) and PdaNet Broadband Adapter that will connect it to the net via my phone and a cable??
 

A:IBM Levono R52 1860 WiFi connection problem

Read other 10 answers
RELEVANCY SCORE 54.8

I encountered the BSOD with the problem about atikmpag.sys It seems like I made a wrong choice about deleting it, (solution from internet searching)  and now the Display Adapters doesn't work anymore as you can see in the pictures  after deleting the atikmpag.sys during safe mode, It somehow resolved the problem about the BSOD and my laptop are finally starting properly now the problem is about the resolution, it's not the same anymore, it's too low and somehow the screen is blurry, as you can see at the Graphics section, the maximum resolution I can only choose is 1024 x 768, which is supposed to be 1366 x 768 (HD) if i'm not mistaken,   I need your help on how to fix this I hope i can turn it back to normal., I don't have a CD installer (if it is supposed to have one) to re-install it, and about downloading from other sites I'm a little bit concerned about that so I haven't tried it yet.. and it seems like Lenovo has its own installer... Pls help ASAP













Solved!

Go to Solution.

A:Lenovo G470 atikmpag.sys problem

hi jm9327,
 
Welcome to the Lenovo Forums.
 
The G470 with a dual GPU (Intel+AMD), uses a muxless driver (this is a custom driver that switches the discrete AMD Graphics to the Intel Graphics to save power). If you have installed a different driver, this may cause system instability (including BSOD).
 
If you're running on Windows 7, try the following::
 
1. Follow this guide on how to disable automatic driver installation.
2. Install these drivers in order (reboot if necessary)
   (1st)  - Intel Onboard Graphics Driver for Windows 7 (64-bit)
   (2nd)  - AMD Video Driver for Windows 7 (32-bit, 64-bit)
 
When finished, check if the yellow exclamation marks are gone under Device Manager > Display Adapters and observe the screen resolution adjustment and BSOD occurrence.
 
 
Let me know how it goes.
 
Regards

Read other 7 answers
RELEVANCY SCORE 54.8

Hello! Recently I upgraded my G470 notebook into win7, and my wifi is not working, the button is turned on and I installed the driver in the lenovo support center, I also installed the Energy Magagement program and etc, but when I press Fn + F5, the only thing that appear is the Bluetooth connection, which is turned on, but my wifi does not show there, and also, it does not show in the Device Manager... What can I do?It is enable on the BIOS as well.

Read other answers
RELEVANCY SCORE 54.4

Hello guys, I try to be detailed as possible in this problem. While watching a H264 MKV AAC video using mpv using this parameters:mpv --vo=opengl-hq:lscale=lanczos3:cscale=lanczos3:dither-depth=auto my computer suddenly blue screen with this dump. [download here : http://1drv.ms/1ujkdR4], summary detail of BSOD(Nirsoft BlueScreenView): -- SOF OF BSOD --A problem has been detected and Windows has been shut down to prevent damageto your computer. The problem seems to be caused by the following file: atikmpag.sysSYSTEM_THREAD_EXCEPTION_NOT_HANDLED If this is the first time you've seen this stop error screen,restart your computer. If this screen appears again, followthese steps: Check to make sure any new hardware or software is properly installed.If this is a new installation, ask your hardware or software manufacturerfor any Windows updates you might need.If problems continue, disable or remove any newly installed hardwareor software. Disable BIOS memory options such as caching or shadowing.If you need to use safe mode to remove or disable components, restartyour computer, press F8 to select Advanced Startup Options, and thenselect Safe Mode. Technical Information:*** STOP: 0x1000007e (0xffffffffc0000005, 0x000000000000ff00, 0xfffff880031af8d8, 0xfffff880031af130)*** atikmpag.sys - Address 0xfffff88004011b1a base at 0xfffff88004000000 DateStamp 0x4ff4eb9e--EOF OF BSOD -- After my unit restarts, the drivers is gone and display "Standa... Read more

A:[Help] Lenovo G470 video card problem.

Adding property (based on details):Hardware Ids:PCI\VEN_1002&DEV_0000&SUBSYS_397517AA&REV_00PCI\VEN_1002&DEV_0000&SUBSYS_397517AAPCI\VEN_1002&DEV_0000&CC_030000PCI\VEN_1002&DEV_0000&CC_0300Driver node strong name:display.inftd.Mfg.NTamd64:vga:6.1.7600.16385ci\cc_0300

Read other 9 answers
RELEVANCY SCORE 48

Hi,
 
At the beginning of the school year I got a new lenovo laptop and when I went to school they uninstalled all of my virus protection and added their own. I was informed that the protection only protected me in the dorms so I should be careful when I was on the wifi on the quad, in the library or at home. Despite my best efforts a few programs I have never heard of started appearing.
 
Programs like yontos, wajam, delta toolbar, mipony and various other programs all found their way onto my computer and I do not know if they are viruses or spyware or anything malicious and I also do not know how many of these malicious programs I have. If someone could help me out with my issue I would greatly appreciate that.
 
Thanks,
CircusBoy18

A:Levono Laptop

Security Check
§  Download Security Check from here or here and save it to your Desktop.
§  Double-click on SecurityCheck.exe
§  Follow the on-screen instructions.
§  A Notepad document should open automatically called checkup.txt.
§  Please post the content of that document.
 
Farbar Service Scanner               
§  Download Farbar Service Scanner.
§  Run it on the computer.
§  Make sure the following options are checked:
o    Internet Services
o    Windows Firewall
o    System Restore
o    Security Center/Action Center
o    Windows Update
o    Windows Defender
o    Other Services
§  Press "Scan".
§  It will create a log (FSS.txt) in the same directory where you run the tool.
§  Please copy and paste the log to your reply.
 
MiniToolBox
§  Download MiniToolBox
§  Run it on the computer.
§  Checkmark following boxes:
§  Report IE Proxy Settings
§  Report FF Proxy Settings
§  List content of Hosts
§  List IP configuratio... Read more

Read other 11 answers
RELEVANCY SCORE 47.6

Hi everyone, I hope someone can help me with this.
My Levono G580 has been working ok but tried to turn on this morning and nothing happened. I've just got home and tried again but still nothing.
I've had a look on a few sites after googling my issue but the only thing I could find is to press the power 10 times and hold it in on the last press for 30 seconds or to remove the battery and try with just the psu but nothing.
Any ideas guys?
Thanks
 

A:Levono G580 dead

I've just heard the power supply giving off really faint buzz like a second hand on a clock when it's plugged into the laptop, still no power though
 

Read other 1 answers
RELEVANCY SCORE 47.2

Just purchased a levono wireless keyboard and mouse. Part number is 41N5672. It was a combo package. Can get the mouse to work but not the keyboard. Have tried resetting everything and nothing. Changed batteries and still nothing. I even put the keyboard within 5 inches of the usb port and nothing. Any advise would be appreicated.
 

A:levono wireless Keyboard and Mouse

Both the USB receiver and keyboard should have connect buttons on them, if you've pressed both and it doesn't work I might be tempted to try the kit on another computer. It could just be faulty.
 

Read other 1 answers
RELEVANCY SCORE 47.2

Hi all, I hope a staff person from Levono is able to assist.  I bought a Levono G50-80, which came with windows 10.I did not like windows 10, and have decided to install windows 7.  I have my valid serial, and I used the windows ISO and bootable usb tool to make a windows 7 usb installer. However, I continue to get a CD/DVD Device Driver is missing error, as exampled here: https://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/a-required-cddvd-device-driver-... I have been online on my other computer for about 6 hours, looking through forums, and trying every single thing, from moving the usb into different ports, various bios settings, various usb tools (rufus) but nothing seems to work.  Could someone tell me what I am doing wrong?  I have done this method for ages; but this is my first Levono machine and I simply cannot figure it out. Any help much appreicated! Jim

Read other answers
RELEVANCY SCORE 47.2

Had this machine for under two weeks, not much installed on it and all of a sudden i keep getting a BSoD at least once a day.
mostly KERNEL_DATA_INPAGE_ERROR
 
i ran scndsk and the only thing that is odd on the report is:
 
 
Examining 1 corruption record ...
 
Record 1 of 1: Bad subtree in index "$I30" of directory "\Windows\SoftwareDistribution\Download\ee8ec565250656e6722ee121783b9984 <0x6,0x2421b>" ... no corruption found.
 
1 corruption record processed in 0.1 seconds.
 
Windows has examined the list of previously identified potential issues and found no problems.
No further action is required.
 
 
I ran memory diag and no issues either.  any ideas to resolve would be appreciated!

A:BSoD - windows 8.1 levono yoga 3

If possible, upload the dump files for analysis.Go toC:\Windows\minidumpUpload all those files by copying (Make sure you copy the files otherwise you will get access denied, even if you're an administrator) them to the desktop and compressing them in a single .zip folder.Or even better, upload a Kernel memory dump.Go the StartRight click My ComputerSelect PropertiesClick Advanced system settingsClick on the Advanced tabSelect Settings under Startup and RecoveryThen under Write debugging information select Kernel memory dump.Once a dump is created go to:C:\Windows\memory.dmpCopy the file to the desktop, zip it up and upload it to a file sharing site like Onedrive. After the upload is done post the download link in your next reply.

Read other 8 answers
RELEVANCY SCORE 47.2

Hi, I have a b40-80(80F6). This was given to me by the Govt on passing my Seconadry exams under a Govt Scheme. While  switching on ,it splashes an ugly bios boot image of the Govt Scheme. I  cannot also access its bios/Uefi settings.Pressing F1, F2 during boot doesn't work. And since I am on Win 10, even the option of getting into Uefi settings from within windows is disabled. I tried updating the bios.  But it says the rom is not newer than that of the bios. Though from a backup by Universal Bios Backup, I could see the installed version is actually lesser that the one I am trying to install. I need to get into bios and I need to do away with the ugly bios boot screen. Help!!! Tried with EzH20. but or some reason it stops working as soon as i click on the logo change thing. Help!!...This ugly boot thing is killing me. 

Read other answers
RELEVANCY SCORE 44

?hello. i have a problem here with my battery, the battery icon showed that 87% plugged not charging (i always set it in best battery health mode). but after i check it through lenovo energy management and it showed me a battery exhaustion notice. is the battery reset gauge feature can make it back to normal? 

Read other answers
RELEVANCY SCORE 44

Hi, recently i just found my old laptop -G470. I need a laptop to do what my pc can do , so when Im not home i can bring the laptop out. What i need is i can photo editing and video editing without any hiccups in the between. Is it possible to upgrade my G470 to what i need or I should just go buy a new laptop. Anyone can help me out here ? Just give me the best hardware that compatible with G470.Thanks in advance.

Read other answers
RELEVANCY SCORE 44

so earlier today i started to get weird issues with video, the screen froze for a few sec then it blinked, tried to restart the game but started to get a notification about keeping it from getting acces to graphics hardware, restarting didnt help and instead of notifications i started to get BSOD, tried restoring the systm but didnt work, now everytime i boot with "Switchable Graphics" on the boot settings i never get video, after the windows 10 flag animation screens turns grey or black, with the fan turning on and off and the screen blinking (i can notice how it gets totally black and black with a backlight), only way to get access to desktop is turning "UMA Graphics" on startup, also reinstalling drivers didnt help

Read other answers
RELEVANCY SCORE 43.6

Hi!I'm having this problem.. mi G470 is showing video without almost any bright. I thought that the LED display was wrong so I replaced it, but the problem persists. Somewhere I read that there is a fuse on the motherboard that gives power to the display. Is this correct? Does anyone knows anything about this? (Windows starts normally, ?I can even login...)Any clue will help! Thanks!!

Read other answers
RELEVANCY SCORE 43.6

Hello, I have a Lenovo g470, and I was wondering if it would be possible to get an Ivy Bridge processor. The manual says the following ones are compatible: Intel I7-2620M 2.7G 4M 2c J1 PGA processor CPU.Intel I5-2540M 2.6G 3M 2c J1 PGA processor CPU.Intel I5-2520M 2.5G 3M 2c J1 PGA processor CPU.Intel I5-2410M 2.3G 3M 2c J1 PGA processor CPU.Intel I3-2310M 2.1G 3M 2c J1 PGA processor CPU. But as it Ivy Bridge are backwards compatible with SB, I wonder if I could get a 3ª processor and put in this mobo. If not, does it worth to change from i3 2310m to anyone of these above?? i5 2540m has 200mhz higher clock on gpu and i7 has more l3 cache(4MB), or should I just leave like this?? I appreciate any help. Thank you.  (Sorry for my bad english)

Read other answers
RELEVANCY SCORE 43.6

hi,

it takes almost 15min to boot windows 7 32bit clean installed window.after that some time works fine but most of the time when i open or close some window, it’s open like in slow motion but task manager shows ok(cpu0to5%ram36%of2GB without any background).I have spare fully working HDD so replaced but problem is same ,even BIOS is hanging.i have tried lenovo provided tool to test system and it shows all ok. cd/rom,wifi card and hdd is tested physically.ram is tested by memory diagnostic tool only.

need help!!!

Read other answers
RELEVANCY SCORE 43.2

Hye..My Lenovo G470 laptop model 20078 is also unable to boot."BOOTMGR is missing" is written.Please help me?
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 

Read other answers
RELEVANCY SCORE 43.2

hey, i have an Lenovo g470 laptop with windows 7 Home Basic, Service pack 1, 64 bits and the webcam wont work. when i start up cyberlink youcam, it says: "Warning, No webcam detected. Try plugging in a webcam into your computer now. If you are using an integrated camera, make sure that it is turned on". It worked when i first got my computer for a few months, then it stopped. I havent used it for a few months because of this problem. Please help me! Any help is appreciated, thanks!
 

A:Lenovo g470 integrated camera not working

Read other 9 answers
RELEVANCY SCORE 43.2

As the Title says.... I have a 5 year old Laptop Lenovo G470 with a switchable graphicsIntel HD Graphics Family 3000 (which win 10 reads it)AMD Radeon HD 6300M series (which win 10 reads it) or "6730M" The Problem is everytime i try to install the AMD its causes BSOD when playing games and stop responding error when trying to watch videos....it works fine alone with just Intel HD Graphics Family...I tried:Installing 1st Intel before AMD in a fresh format (Which i read about the issue about AMD)....= Still having BSODInstalled latest drivers for AMD... = Still having BSODDid try to find to downgrade BIOS if thats the case = Failed didnt find lower BIOSdid the atikmpag.sys thingy... = caused me more trouble since it does not go to start windows so what im having now is just my Intel HD working... can someone help me with this issue... im not really that techy guy but i do know how to follow instructions

Read other answers
RELEVANCY SCORE 43.2

There's always a pop-up message that my Lenovo D: drive is almost out of space, I clicked it, cleared recycle bin, but nothing happened still, I manually checked on the drive but I'm afraid to delete these folders such as applications, drivers, etc.. please help me to resolve this... I would really appreciate your response..
 

A:How to free space on my Lenovo G470 drive D:

What is on the "Lenovo D: drive"?

Please attach a screen shot of the Disk Management window, as that sometimes helps us understand your issue. If you need help with that see TSG Posting a Screenshot. FWIW to take screen shots with Windows 7 or Vista I prefer to use the built-in Snipping Tool.
 

Read other 1 answers
RELEVANCY SCORE 43.2

hey, i have an Lenovo g470 laptop with windows 7 Home Basic, Service pack 1, 64 bits and the webcam wont work. when i start up cyberlink youcam, it says: "Warning, No webcam detected. Try plugging in a webcam into your computer now. If you are using an integrated camera, make sure that it is turned on". It worked when i first got my computer for a few months, then it stopped. I havent used it for a few months because of this problem. Please help me! Any help is appreciated, thanks!
 

A:Lenovo g470 integrated camera not working

welcome to TSG.

Please do not create duplicate posts for the same issue. Closing thread, please respond at the one in hardware.

http://forums.techguy.org/hardware/1052268-lenovo-g470-integrated-camera-not.html

thanks,

v
 

Read other 1 answers
RELEVANCY SCORE 43.2

Greeting i updated the BIOS to lastest version, and the keyboard start to beep, the operative systems dont work fine, some keyboards have malfunction with the shift key, my keyboard is in spanish, with the english version of the keyborad the problem is solved. The motherboard in the notebook is ok, no conectors damage. PD: excuse my english i'm spansih native speakers

A:keyboard fail in g470 after BIOS update

Rickynet wrote:
Greeting i updated the BIOS to lastest version, and the keyboard start to beep, the operative systems dont work fine, some keyboards have malfunction with the shift key, my keyboard is in spanish, with the english version of the keyborad the problem is solved. The motherboard in the notebook is ok, no conectors damage.
 
PD: excuse my english i'm spansih native speakers

From what I understand  your notebook works fine when using English keyboard layout, but does not work as expected if you change to Spanish keyboard layout.
 
Check your BIOS for a language or region setting and adjust as needed.  Also - look in control panel for keyboard settings and install additional keboard layout for Spanish.
 
Good luck.
 
CB

Read other 3 answers
RELEVANCY SCORE 43.2

Here i comes again for another problem and need another solutions.

Why everytimes i plug-in the AC it only charge 50% batteries..That the max..

so is it normal? or any problem to my lenovo? before this it charge 100% but after i install new windows 7 ultimate it only charge 50%...please help~

sorry for my bad english~ ASIAN PEOPLE BAD AT ENGLISH

A:Batteries Charge only 50% for Lenovo G470, is it normal??

Which version of Windows you have shouldn't affect how your battery is charged up so it's probably just coincidence.

You may be needing a new battery. Do you have anyone nearby who can check the battery for you?

Your English is better than my non-existent Malaysian!

Read other 9 answers
RELEVANCY SCORE 43.2

hey, i have an Lenovo g470 laptop with windows 7 Home Basic, Service pack 1, 64 bits and the webcam wont work. when i start up cyberlink youcam, it says: "Warning, No webcam detected. Try plugging in a webcam into your computer now. If you are using an integrated camera, make sure that it is turned on". It worked when i first got my computer for a few months, then it stopped. I havent used it for a few months because of this problem. Please help me! Any help is appreciated, thanks!
 

A:Lenovo g470 integrated camera not working

welcome to TSG.

Please do not create duplicate posts for the same issue. Closing thread, please respond at the one in hardware.

http://forums.techguy.org/hardware/1052268-lenovo-g470-integrated-camera-not.html

thanks,

v
 

Read other 1 answers
RELEVANCY SCORE 42.4

After spending an inordinate amount of time searching the internet about my problem, and then contacting Lenovo (who told me it was hardware and I needed to return all of the laptops I bought), I managed to magically find the solution to my problem.  Since it wasn't documented elsewhere on the internet, I thought I'd create a post for it here. The problem I was having was that my Lenovo G470 laptop did not display Press F2 to Enter Setup during the boot process, and because of this, no amount of hammering the F2 button would allow access to the BIOS.  I attempted all of the standard fixes, pulled the battery, held power down for 30 seconds, removed the HDD -- nothing would cause this to appear.  Since it was happening on all 3 of the G470s we just purchased, I didn't believe it was hardware.  I reached out to Lenovo Premium Support, and after about 3 minutes of discussion, "Paul" informed me that all three machines were defective and would have to be sent back in for repair, and it would take 4-6 weeks for repair and diagnosis.   As I had been noodling around with the machines for a few days, ONE of the three ended up showing the bios options during the boot process.  At that point, I had been hitting just about every single key on the keyboard during the boot process, so I couldn't identify what it was that I did that caused the options to appear.  A little more troubleshooting and I figured it out: Lenovo G470 machines equip... Read more

A:SOLUTION: Press [F2] to Enter Setup does NOT Appear - Lenovo G470

Now that's a slick solution.
 
Dave

Read other 9 answers
RELEVANCY SCORE 42.4

i has been bougth lenovo g470 friend's. with specs core i3.does the g470 I bought do not have dual graphics with AMD radeon?,because every i install amd driver, always failed.i check specs on google all article says it have a dual graphics.

Read other answers
RELEVANCY SCORE 42.4

Hello everyone. I installed W10 in a G470 Laptop (Lenovo) - Machine Type 4328. After 10 days it shows a blue screen, error 0xc00000034. I cannot even turn on the computer now. I have files inside that I don´t want to lose. Is this a common issue with W10? What should I do? Thank you all. Maria
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 
 

A:G470 - Blue Screen error 0xc00000034 after Windows...

That BSOD stop code usually points to a problem with the Hard Drvie (HD) that is preventing it from booting.   If you have another computer running Windows 7, 8.1 or 10, you could Create a System Repair Disk that you can use to boot your laptop, and from the tools on the CD, run a chkdsk of the hard drive.   You can also use another computer to create download the Windows 10 install media directly from Microsoft, and use it to boot your system and attempt a repair, but if your HD is actually going bad, attempting any sort of repair may just make the chance of recovering your important data less likely. If you have data on the existing HD that you simply cannot bear losing, I would leave it off, and take the system to a good local computer shop and have them try to recover your data off the HD before attempting any sort of repair.    A good PC repair shop will be able remove the HD from your laptop, attach it to another computer, and attempt backing up your data off the old drive for you.    How to create a Windows System Repair DiscInsert a blank writable CD or DVD into your CD/DVD driveSelect  Start >> Run and type:  recdisc  and press enter.Select "Create Disk"Good Luck,     

Read other 4 answers
RELEVANCY SCORE 42

Please need help,

I can't found newest driver video card Lenovo G470 for Windows 7 Profesional 32bit

A:How to get driver Video Card Lenovo G470 with support Direct3D ?

You should be able to get updates from Lenovo support (Link below). In the Category drop-down select Video. In the Operating System drop-down select Windows 7. Choose the correct driver download for your video hardware.

Drivers and software - Lenovo G470 Notebook

Also, there's numerous other updates for your PC. You should browse the list.

Read other 1 answers
RELEVANCY SCORE 42

Hi there,              I am planning to upgrade my lenovo G470 series laptop.I am planning for 8gb or 16gb ram and harddisk 1Tb or 2Tb.Upto how much ram my laptop supports.?Should i buy two 4Gb ram or jus needed only one 4Gb ram(Not sure how many ram chip is inside 2 x 2gb or 1 x 4Gb)? Can i implement a SSD hard disk instead normal hard drive?.Will this upgrade will be supported by my laptop.Will it be worth it after all these years(6-7yrs)?How much will it cost in India for the above upgrade? thank you,Hari Sankar

Read other answers
RELEVANCY SCORE 20

Hi,
I need some help and if anyone can help me I will be very appreciated. My system is Windows 7 Ultimate X64.
1. USB port.
I used to have a Lenovo thinkpad W520, the USB ports can still provide power and the devices connected to the port won't be disconnected after the PC turning into sleep mode even power off, but everytime when I wake up my Precision 7510, the keyboad need a long wait to be reconnected and all of the external hard drives are reconnected too (Auto play also pops out). And I cannot charge my cellphone even if the precision is in sleeping mode with power connected to it.

2. External Monitor,
I get a Dell P2417H monitor. I connect the monitor to my PC through Display port. 
Then I use the Screen Resolution to Identify the monitor. I then use "Identify" to identify the monitor, at first both of the monitors show (1\2), which is correct because windows is set to duplicate the monitors. Then I selected Show desk top only on 1 and then "Identify" the monitors. Both of the monitors show a big 1. Then I selected show desk top only on 2 and then "Identify" the monitors. Both of the monitors show a big 2.(My p2417H is actually 2)
Then I select apply so only p2417H shows the display and close the laptop's lid. (I set the power options, so that the PC won't be turn off when I close the lid or after a long deactivation) 
As long as I close the lid and turn the laptop into sleep mode and wake it up. The monitor setting... Read more

A:Precision 7510 USB port problem, monitor problem and Intel Rapid Storage problem

Some of what you're experiencing may be due to the different hardware than you had in the older system - however, one BIG possibility:
Windows 7 does not fully support the power management features of the Skylake CPU and chipset in your system.  Even if Windows 7 is correctly installed, there will be missing features (Microsoft never implemented the advanced Skylake power management features in anything older than Windows 8).
You'd likely experience some of the same issues with a Skylake Lenovo system.
The Skylake platform in your system WILL run Windows 7 (it's the last Intel platform that will;  the newly released Kaby Lake won't run it at all), but it won't implement all the Skylake power management features it has no drivers for (and never will have drivers for).  Unless you're completely stuck with Windows 7, most of the issue -- or all of them -- will go away if you move to Windows 10.  If you don't do it now, this is the last hardware you'll be buying -- as above, Windows 7 is history as of the release of the new Kaby Lake platform.

Read other 2 answers
RELEVANCY SCORE 19.6

i load up my machine as per usual and norton antivirus cannot load up at startup because it says i have a corrupted or missing ccimscan.dll and defalert.dll.

norton seems to be ****ed up and symantec webapage has no solution, which also has coincided with my roxio cd buring version 5 basic. roxio doesn't load up at all, and also in windows media player 9, i cannot burn cd's as it says the roxio burining engine is not there and or the directcdbf.dll is missing.

i performed scandisk and all that shite and on that programme in windows where it tells you if you need to replace files ( can't remember its name). anyway the files that are corrupted are uneng.exe (which i found out is the roxio burn engine unistall programme???) and the tntlvr.dll is corrupted too. don't know what this tnt thing is but i am assuming its my tnt2 graphics card???, but it isnt showing any problems.

i have adaware and regulary use it, and hijack this only workd using the old version so i will post the log file thing here. i am totally confussed as all this happened out of the blue the other day. thanks in adavance. please help me

Logfile of HijackThis v1.97.7
Scan saved at 18:57:24, on 05/09/06
Platform: Windows 98 SE (Win9x 4.10.2222A)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\SYSTEM\KERNEL32.DLL
C:\WINDOWS\SYSTEM\MSGSRV32.EXE
C:\WINDOWS\SYSTEM\MPREXE.EXE
C:\WINDOWS\SYSTEM\mmtask.tsk
C:\WINDOWS\SYSTEM\MSTASK.EXE
C:\WINDOWS\SYSTEM\WINMODEM.... Read more

A:norton antivirus dll problem linked with roxio dll problem. really wierd problem.

Read other 16 answers
RELEVANCY SCORE 19.2

I believe I have a virus these are the symptoms i am experiencing and what I have tried so far:-

1. I am having problems using google, sometimes when I click on results they go to another page, sometimes it decided i am not connected to the internet when I know I am.

2. I started by trying to run Malwarebytes but this would not open, then the same problem occurred with Spybot, it wont open.

3. I tried to scan with Trend Micro but the virus has prevented Java from working and so Trend does not work.

4. Tried to do a system restore but that says the drive failed during the restore.

5. AVG does not find any viruses when scanned.

6. Computer will not hibernate, it goes to blackscreen and then back to the desktop.

7. I managed to get Malwarebytes working by renaming the file from mbam.exe to mbam1.exe but now it freezes is not responding about halfway through the scan, have also told it not to scan registry items but it still freezes. Also after it has frozen it will not close even by trying to end the process.

So they are my problems can anyone help? Thanks

A:Virus, google problem, Malwarebyte problem, Spybot problem, etc

Try this scan. You can copy it over from another computer on a CD or pen drive if you need to.Before we start fixing anything you should print out these instructions or copy them to a NotePad file so they will be accessible. Some steps will require you to disconnect from the Internet or use Safe Mode and you will not have access to this page.Please download DrWeb-CureIt and save it to your desktop. DO NOT perform a scan yet.Reboot your computer in "Safe Mode" using the F8 method. To do this, restart your computer and after hearing your computer beep once during startup (but before the Windows icon appears) press the F8 key repeatedly. A menu will appear with several options. Use the arrow keys to navigate and select the option to run Windows in "Safe Mode".Scan with Dr.Web CureIt as follows:Double-click on drweb-cureit.exe to open the program and click Start. (There is no need to update if you just downloaded the most current versionRead the Virus check by DrWeb scanner prompt and click Ok where asked to Start scan now? Allow the setup.exe to load if asked by any of your security programs.The Express scan will automatically begin.
(This is a short scan of files currently running in memory, boot sectors, and targeted folders).If prompted to dowload the Full version Free Trial, ignore and click the X to close the window.If an infected object is found, you will be prompted to move anything that cannot be cured. Click Yes to All. (This will move any detected f... Read more

Read other 1 answers
RELEVANCY SCORE 19.2

Hi! I have a few problems with a few difference softwares. I thought it would be best open on thread with all the problems other than opening multiple different threads.
My Problems are:

1) I use mozilla firefox and i have a problem opening PDF files. When i click on a link which leads me to a PDF file, the following error message pops up.
"The adobe acrobat/ reader that is running can not be used to view PDF files in a Web Browser. Please exit Adobe Acrobat/Reader and exit your Wev Browser and try again."
When I use Internet Explorer, I get a similar error message.
"The adobe acrobat/ reader that is running can not be used to view PDF files in a Web Browser. Adobe Acrobet/Reader version 8 or 9 is required. Please exit and try again."
This message tells me to exit Adobe Acrobat/Reader. I don't exactly know how to do that.

2) The other problem I have is with Windows Live Messenger (MSN). This messenger allows you to draw in a conversation. They have a handwriting tool. The problem I have with this tool is that when I use it to draw something, what I draw doesn't appear on the place where I am suppose to draw before sending the message. But when I click send just by drawing something with seeing what is happening on my screen, I will be able to see what I drew in the message sent part of the window. I know this is confusing but it is hard to explain. So basically, while drawing something, I can't see it but when i send it, I can see it.
... Read more

A:PDF Files Problem | Windows Live Messenger Problem | WMM Problem

Read other 16 answers
RELEVANCY SCORE 19.2

Thanks for the forum.

First - Network problem prevented internet access. I used "Diagnose" and "Repair". Repair found something and "fixed" it. Internet accessed after that.

Even Log:
Code:

Problem signature
Problem Event Name: NetworkDiagnosticsFrameworkV2
Vendor: Microsoft
OwnerHC: WinInetHelperClass
OwnerHCVersion: 1.0
SessionStatus: 2
HRESULT: 8008F906
Repair: {30B6B189-CCE3-4b6f-877B-C1AE960CE1EF}
RootCauseHC: Winsock
RootCauseHCVersion: 1.0
RootCause: {D438FDF3-F143-430e-B187-E02B2E14B641}
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 1033

Files that help describe the problem
eventlog.etl

Second - Firefox (Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.9.1.2) Gecko/20090729 Firefox/3.5.2 (.NET CLR 3.5.30729) will load, but will not search for page. Page viewing area remains blank and page status says "Done". I uninstalled and reinstalled without deleting user settings. This did not repair Firefox.

Third - Outlook 2007 Trial Version (12.0.6504.5000) SP2 MSO
(12.0.6425.1000) - Will not login to server. Error message reads "Receiving reported error (0x80040900). The server name you entered cannot be found on the network. (it might be down temporarily) Verify that you are online and that the server name is correct.

There is no event log associated with the Outlook problem.

Event logged from same day, but I'm unaware of how this fits:

Code:
Problem signature
Problem Event Name: ... Read more

A:Network problem became Firefox & Outlook problem, then MS update became AVG problem

??? Highhunter, Is this a reply to my earlier post???

Read other 19 answers
RELEVANCY SCORE 18.8

Hi, I'm new here (meaning I just made an account but have been lurking around every time I had computer trouble. This time however, I couldn't find anything that resembles the trouble I'm currently experiencing) and I'm hoping if anyone can help me or tell me if I should just throw my laptop against the wall.

I've had my printer (details and TSG SysInfo below) for over a year now, and never had any trouble with it. A few days ago, I needed to print something but wasn't able to (I can't remember what the error said, it didn't happen again) so I uninstalled the printer and re-installed it by downloading the drivers from the HP website. Pop-up balloon said that it wasn't successfully installed and when I would try to install the driver by going to print management and click on Printers I would get: "An error has occurred on the script of this page. Line: 40. Char: 21. Error: Object doesn't support property or method 'SetPrinterName'. Code: 0. URL: res://C:\Windows\system32\pmcsnap.dll/81". So I clicked on Drivers instead and tried to install the driver there and it said: windows found driver software for your device but encountered an error.

Do understand that I have no idea what I'm doing whenever my computer doesn't behave as it is supposed to, and everything is done by trial and error; mostly error. For some reason I felt the need to do a chkdsk /f /r which was scheduled on the next restart, b... Read more

A:printer problem? software problem? hardware problem?

Howdy,
Could be the Hard drive has gone faulty. What make and model is this Laptop?
 

Read other 2 answers
RELEVANCY SCORE 18.8

I have no idea if it is the same problem. First of all I am using a wireless router, I have a internal wireless thing on my laptop. And I am able to connect and all but when i went to ebay.com and tried to log in, It leads to me a page as if I am not online. So I am wondering if it is my router settings or my laptop that makes it like that. Thank you for your help.
 

A:Help with Internet problem. Downloading problem / login problem.

This problem doesn't seem limited to Websites, I can't sign in on MSN too. Or login to anything. I am using a airlink router Model AR315W. So if anyone can help, please do. Thanks.
 

Read other 3 answers
RELEVANCY SCORE 17.6

I had no problems with Customer Preview, everything worked, but, I must say that this Release Preview is another story all together. My PC hardware configuration is unchanged since installing Windows 7 when it came on to the market.

1. Doing a clean install did not install a clean installation of Windows 8. It took three attempts. Previous wallpaper, user login avatars, etc. kept showing up in the new supposedly clean install, even when installing with a local account.

2. At shut down I am constantly getting a winlog.exe error stating that I need to insert a disk in to various empty drives. This stops the computer from shutting down. The error message appears 18 times and has to be clicked away every time it appears. The OS shuts down but my computer hardware keeps running [fans, disks, etc.] I fear I may have to get rid of Windows 8 RP before it ruins my entire PC.

3. After the OS has shut down the computer itself will not switch the power of. The computer light showing disk activity is constantly on, even though the OS has been shut down.

I'm going to have to give up on this OS. This release candidate is not working at all well on my setup. Highly peculiar, especially as I had no issues with the Customer Preview and nothing has been changed in my PC hardware setup.

A:Release Preview - Nothing but problem after problem after problem.

Hello Rich,

I know you said clean install, but just to check, did you delete the old Windows 8 CP drive/partition so it will be "Unallocated Space", then reinstalled Windows 8 RP?

Did you use a local user account or a Microsoft account? If Microsoft account, then that would be why you got your user picture back since it synced with your Windows Live ID and used the same one.

Read other 13 answers
RELEVANCY SCORE 16.8

Wasn't sure if I was supposed to start a new topic to reply to your reply. I posted it as a reply on the existing topic as well as started a new one here. Please let me know the correct way to post a reply to one. I apologize if I am doing this incorrectly as a new member. Thank you.Thank you for your reply. I have installed and run Ewido Security Suite. Here are the logs you asked for:Logfile of HijackThis v1.99.1Scan saved at 9:28:31 PM, on 5/22/2006Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\spoolsv.exeC:\WINDOWS\Explorer.EXEC:\WINDOWS\System32\PackethSvc.exeC:\Program Files\Common Files\Acronis\Schedule2\schedul2.exeC:\Program Files\Compaq\Compaq Advisor\bin\compaq-rba.exeC:\Program Files\Common Files\Real\Update_OB\evntsvc.exeC:\Program Files\Java\jre1.5.0_06\bin\jusched.exeC:\WINDOWS\system32\Smtray.exeC:\WINDOWS\system32\pctspk.exeC:\Program Files\Common Files\InstallShield\UpdateService\issch.exeC:\Program Files\... Read more

A:Windwos Explorer Has Encountered A Problem And Must Close, Dr Watson Has Encountered A Problem And Must Close, Problem Occurs W...

Please continue in this thread. http://www.bleepingcomputer.com/forums/t/53295/windwos-explorer-has-encountered-a-problem-and-must-close-dr-watson-has-encountered-a-problem-and-must-close/Thanks.

Read other 1 answers
RELEVANCY SCORE 16.8

Recently reinstalled windows XP. Before reinstall had Musicmatch in original shipped Dell. Dimension 3000.
Now get - Error 'Muscimatch dukebox problem -MMJB Soundcard problem - waveout format not supported.' Is there part of reinstallation of XP that I may have neglected?
In Control Panel, Sounds, Speech and Audio Devices - indicates no audio devices.
Thanks
s
 

A:Muscimatch dukebox problem -MMJB Soundcard problem - waveout format not supported

Read other 10 answers
RELEVANCY SCORE 16.8

Infineon Trusted Platform Module Problem on Device Manager

I tried updating the driver and it says the driver is up to date. I've also tried to disable it and enable it back but still the yellow caution sign still appears.
How to fix this.
I'm pretty sure this is what made the Infineon Security Platform Setting Tool unable to work.

If you need any other info to solve this please let me know.

================================================================================

Kaspersky Problem

Kaspersky is working fine but why does TuneUp 2010 detect this problem.

I'm Using Kaspersky Internet Security 2010 with 3/10/2010 Database.

If you need any other info please let me know.
Thank you.
 

A:Infineon Trusted Platform Module Problem on Device Manager and Kaspersky Problem.

Bump
 

Read other 1 answers
RELEVANCY SCORE 16.8

My PC was recently upgraded to Win-8.1. When it started up, my video card drivers were reset from ATI Radeon 4300/4500 Series, to Microsoft Basic Adapter. Along with that my PC now has an unsightly array of black borders around my screen. If anyone would help me with what is wrong it would be greatly appreciated..

A:Black Border Problem / Reset Video Card Driver Problem

Install the AMD drivers for your video card. Latest AMD Catalyst Graphics Driver for Windows 8

Read other 7 answers