Over 1 million tech questions and answers.

Seagate firmware update FreeDOS/Linux

Q: Seagate firmware update FreeDOS/Linux

I own a S440 and I like to upgrade the firmware for the Seagate SHDD ( http://support.lenovo.com/de/en/products/Laptops-and-netbooks/ThinkPad-S-Series-laptops/ThinkPad-S44...) There is no bootable iso or anything I can use directly. At least I need the correlation between the extracted *.LOD files and the compatibles HDD. Seagte does not have any further information about this firmware upgrade. (https://apps1.seagate.com/downloads/request.html , Part Number: 1EJ162-073) I guess some OEM restrictions.FreeDOS did not work. with this guide you could at least try to flash the firmware under *nix:https://github.com/jandelgado/general/wiki/Firmware-update-of-Seagate-harddisk-using-Linux Which firmware file do I need? (ST500LM000-SSHD-8GB)Why lenovo do not release at least a bootable WinPE for flashing firmwares?




Thinkpad T500 2082-52gHDD changed into SAMSUNG HM500LIMicrosoft Windows 6.1 Built 7600 - Windows 7

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Seagate firmware update FreeDOS/Linux

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 75.2

I have a 1TB Seagate Barracuda ST1000DM003-9YN162 like the one shown on this firmware update page:

Barracuda (1TB/disk platform) Firmware Update

Because i've been having problems waking from sleep mode I wanted to update the firmware on it from my version now CC9B to its current version of CC9D. I downloaded its windows update utility and ran it. Everything seemed ok, it shut down windows, restarted, ran the updater, then it said "FAILED" in big red letters then asked me to go back to Windows. I did, everything was ok nothing got messed up.

Why did it fail to update the firmware? Was it because I didn't have CC9C and it didn't want to skip from CC9B to CC9D? Do I need to update to CC9C first? What should I do?

The update utility says that it cant be run on "RAID Systems". My system is capable of RAID but I dont have a raid setup i use ACHI. Do I need to go into my BIOS and disable something that has to do with RAID? As far as I know I have nothing enabled that has to do with RAID. Any help is appreciated. Thanks.

A:Seagate HDD Firmware update failed. Why?

I suspect that if your drive is not listed here: ALL FIRMWARE UPDATES - see here - Seagate Community Forums
Which I don't see, a firmware update is not needed nor compatible with the update.

Also read this: Does my drive need a firmware update?

Read other 3 answers
RELEVANCY SCORE 75.2

Hello
Using dell inspiron 5448 with HDD 1 TB + SSD 8 GB, windows 10, 64 bit working fine.
Found the new Seagate fimware on the dell support as follows

Seagate ST500LM000/ST1000LM014 Firmware Update


File Name: Kahuna V_ZPE.exe
Importance: Recommended


Description: Hard-Drive (47.16 MB)
Release Date: 09 Nov 2016



Version: DEMM/DEMN ,A05
The installation failed on my laptop with an alarm box showing unable to identify the boot partition, please use the USB boot key or CD ISO image of this utility instead.
Confused since installation instruction said just download and it will be automatically installed.
Called Dell but the agent said nothing they could do.
Any suggestions?
Thanks

A:Seagate firmware update failed

I suggest you right click windows logo (or click yellow folder), click and expand 'File Explorer', 'This PC', and then check to see if Seagate update is either in your downloads or documents. If yes, I suggest you open the file and click 'Run As Administrator'.

Read other 7 answers
RELEVANCY SCORE 72.8

I have installed Windows 10 and started installing drivers on this page https://support.hp.com/us-en/drivers/selfservice/hp-envy-touchsmart-15-j100-notebook-pc-series/54011... sp77075.exe Seagate Hard Drive Firmware Update When this etup is run now Windows does not boot. I boot in to Tiny core terminal and nothing goes on. Please help. Thanks.

Read other answers
RELEVANCY SCORE 71.6

Got a notice from Lenovo updates about a hard-drive update. Went ahead and updated the firmware. Now my laptop randomly freezes and is sluggish. Is there anyway to downgrade the hdd's firmware?

Read other answers
RELEVANCY SCORE 71.2

When I install seagate hd firmware update it shows this error message how can I install this update????

A:how to update seagate hd firmware update

The error message did not come through; all is there is a grey triangle.  Post the message as text.

Read other 3 answers
RELEVANCY SCORE 70.4

I am running Ubuntu 19.10 on a recently-purchased X1 Extreme gen 2. The installed BIOS version is 1.26. I looked in the Drivers & Software page and I see that 1.27 was released on 29 October. However, running `fwupdmgr --get-updates` says "No upgrades for 20QVCTO1WW System Firmware, current is 0.1.26: 0.1.23=older, 0.1.23=older". How long does it usually take for firmware updates to be available via fwupdmgr? Should I manually update? I downloaded the BIOS Update Utility for Linux and the README. The directions in the README are clear, but nowhere do I see the 20QVCTO1WW ID mentioned above and want to make sure that I have the correct files. The BIOS Update Utility download is called `n2oul06w.zip` and contains 3 CAB files: N2OET40P.cab, N2OET40W.cab and N2OHT32W.cab. Is this the right file? Which one should I apply? Thanks in advance,-Mario.

Read other answers
RELEVANCY SCORE 69.2

Anybody any clue as to how to perform the update under [email protected]: please bear in mind that not all your customers run Microsoft... support for Linux systems would be much appreciated! https://pcsupport.lenovo.com/nl/en/products/LAPTOPS-AND-NETBOOKS/THINKPAD-X-SERIES-LAPTOPS/THINKPAD-...

Read other answers
RELEVANCY SCORE 68.4

The linux version of the latest BIOS/ECP firmware (1.44/1.18) for the X1 Carbon 4th gen (type 20FB and 20FC) and X1 Yoga 1st gen (types 20FQ, 20FR) was released Aug 2 (n1ful37w.zip) https://pcsupport.lenovo.com/de/en/products/laptops-and-netbooks/thinkpad-x-series-laptops/thinkpad-... Direct link: https://download.lenovo.com/pccbbs/mobiles/n1ful37w.zip That .zip file contains two .cab files, N1FET70W.cab and N1FHT35W.cab, for the BIOS and ECP respectively. Updating the BIOS in linux for my X1 Carbon 20FB worked fine for me with fwupdmgr, but failed for the ECP. This was because the metadata for the ECP update has a typo. Inside the N1FHT35W.cab file is a firmware.metainfo.xml, with a GUID of: 4c2e5b5c-6467-43af-afeb7bc72d96b9c3 This is incorrect. It's missing a dash, and should read: 4c2e5b5c-6467-43af-afeb-7bc72d96b9c3 Modifying this file within the .cab (or extracting it and generating a new .cab) and then flashing that with fwupdmgr fixed the problem. I've attached the modified .cab file (nested in a .zip file for upload). You can check yourself that the only thing that's changed is the GUID line in the .xml file. This typo should be fixed in the source by Lenovo and reuploaded as perhaps a rev 2 for n1ful37w.zip . Hopefully this hasn't happened for any other firmware update files.

Read other answers
RELEVANCY SCORE 66.4

Hi! I recently bought an Inspiron 15 7000 (7559). I went to the "Drivers and Downloads" section of the Dell website for my model and downloaded and installed the latest  drivers and updates.The issue started when I got to the "Seagate ST500LM000/ST1000LM014 Firmware Update" download. I opened the bottom of the laptop and made sure that the update was for my HDD. My model was ST1000LM014 so I downloaded the update "Kahuna_ZPE.exe" and ran it.It started to run but then stopped at where it said "rEFInd - Initializing" and a bunch of lines saying "Binary is verified by the vendor certificate". I thought maybe it just took time to initialize so I left for a workshop I needed to do at work and asked my wife to see what would happen. 8 hours after when I got home, it was still on the same screen. Now, when I switch it off and on, it always goes back to the same screen.Has anyone encountered the same issue before and know how to resolve this? Thank you.

A:Stuck at "rEFInd-Initializing" after trying to update Seagate HDD firmware

I had the same issue on my Dell 7559 today. When it tried to install the update it seemed to go into a loop with similar info. The only way I got it to proceed was - at the point where it changes screens (on my PC, it changes) a list of options appear. After much trial & error, I found I could move from one selection to another, then make a selection by moving the up/down keyboard arrows and entering a choice. Some of the options led to the "Safe" screen, which I couldn't find a use for. The top listing was the only one that I hit on that went through a cycle, that didn't seem to end correctly, but at least it stopped the loop. I'm sur Dell support is needed to make any sense of this one.
If I learn any more, I'll update the info.  Mike

Read other 8 answers
RELEVANCY SCORE 66.4

Hi! I recently bought an Inspiron 15 7000 (7559). I went to the "Drivers and Downloads" section of the Dell website for my model and downloaded and installed the latest  drivers and updates.
The issue happened when I got to the "Seagate ST500LM000/ST1000LM014 Firmware Update" download. I opened the bottom of the laptop and made sure that the update was for my HDD. My model was ST1000LM014 so I downloaded the update "Kahuna_ZPE.exe" and ran it.
It started to run but then stopped at where it said "rEFInd - Initializing" and a bunch of lines saying "Binary is verified by the vendor certificate". I thought maybe it just took time to initialize so I left for a workshop I needed to do at work and asked my wife to see what would happen. 8 hours after when I got home, it was still on the same screen. Now, when I switch it off and on, it always goes back to the same screen.
Has anyone encountered the same issue before and know how to resolve this? Thank you.

A:Stuck at "rEFInd - Initializing" after trying to update Seagate HDD firmware

Same here

Read other 13 answers
RELEVANCY SCORE 59.2

January 26, 2009 (Computerworld) Last week, Seagate Technology LLC tried to appease users who for the past two months have swarmed its online support forum to complain that desktop hard drives have been freezing up during data transfers or failing altogether.

Seagate late last week released the second of two fixes for the firmware bug that caused the problem, and it offered affected users free data recovery services from its i365 business unit.

The company first tried to fix the bug on Jan. 16, but new firmware it released that day had flaws of its own.

use the link above for the original article
 

A:Warning: Seagate HD Firmware issues

I've been following this for the past couple of weeks now, I think the point the article is trying to make is that the 1st firmware revision released on the 16th also bricked drives, but the 2nd firmware fix is OK... at least the drive I applied the 2nd firmware to is fine.

I've got 5 more to try.
 

Read other 2 answers
RELEVANCY SCORE 58.8

 I can see BIOS update available for my laptop but currently i have Linux installed hence i cannot run HP software / Tools to apply the update. I have downloaded the executable and i have bootable FreeDOS USB. My doubt is "Can we update BIOS by executing the downloaded exe file in FreeDOS" If yes what would be the steps and should i take any precautions.

A:Can we update BIOS from FreeDos

Hi: You can only flash the BIOS using the supported Windows Based BIOS flash for the supported Windows Operating system. There are no DOS flash files you can install independent of the Windows installer. Bottom line:  If you want to flash the BIOS you must install Windows 7.

Read other 2 answers
RELEVANCY SCORE 58.4

I have a Dell 630i. I recieved in the mail a CD for a firmware fix for a Seagate Barracuda firmware fix for the 750mb harddrive. Has anyone done this? Has everything gone all right? It is my sons computer and we are not very tech savey. What is the correct method for doing this upgrade? Is there a danger of ruining the drive? If everything seems to be working OK should I ignore the fix? The CD is dated April 20, 2009. Is this the latest update or should I download from the Dell site? Thank you very much for any help to can give a "nervous" parent.
 

A:Solved: Seagate Barracuda SATA HD Firmware Fix

I resolved the issue by calling Dell and thier technician took control by remote connection and updated the frimware. All is good.
 

Read other 1 answers
RELEVANCY SCORE 58.4

Hello HP support and everyone. I have problem with my HDD /SSHD/ Seagate ST500lm000. After upgrade firmware to the latest firmware verion HPM9 on HDD /version of package SP71354.exe/ I have problem with it. When I start my notebook after 3-4 seconds I hear noisly 1- 2 clicks from the drive. After when windows starts HDD noise is ok. With previsious verion of firmware HPM6 was everythink ok. I searched for downgrade on web, but I didnt find enything. My question : Is posible to downgrade the firmware on this drive to version HPM6 or is schedulled any update for this HDD ? I am sure that the new firmware is responsible for clicking on my HDD. Thanks

Read other answers
RELEVANCY SCORE 58.4

Hello HP support and everyone. I have problem with my HDD /SSHD/ Seagate ST500lm000. After upgrade firmware to the latest firmware verion HPM9 on HDD /version of package SP71354.exe/ I have problem with it. When I start my notebook after 3-4 seconds I hear noisly 1- 2 clicks from the drive. After when windows starts HDD noise is ok. With previsious verion of firmware HPM6 was everythink ok. I searched for downgrade on web, but I didnt find enything. My question : Is posible to downgrade the firmware on this drive to version HPM6 or is schedulled any update for this HDD ? I am sure that the new firmware is responsible for clicking on my HDD. Thanks

A:Seagate SSHD st 500lm000 HP firmware /500GB + 8GB/

Please identify your notebook with its complete product name or product number.- see This HP web document if you don't how to locate the model number and\or product number.  Is your notebook still covered under warranty?  Check your warranty status Here. Was the hard drive one that was delivered with the notebook or is it one that you installed?  Where did you get the firmware update from?  Was it from the HP or Seagate support website? Please answer all of the questions.

Read other 1 answers
RELEVANCY SCORE 57.2

I was updating my drivers for my new Lenovo Yoga 920 laptop and I tried to use this driver: https://pcsupport.lenovo.com/no/en/products/LAPTOPS-AND-NETBOOKS/YOGA-SERIES/YOGA-920-13IKB-GLASS/do... However, the update keeps failing and the Type C ports do not work now. I can't charge my laptop. Luckely I am at 75%, so I have about 3-4 hours to fix this before I'm forced to take it to service. I tried this solution: https://www.gfisk.com/lenovo-yoga-pd-firmware-update-failure-ccg4-two-port-usb-c-controller/but it doesn't work for me. I'm getting desperate I'm supposed to press the power button for 8 seconds and the powering should be back on, but for me the lap top goes off after 3 seconds of holding the power button. I keep pressing the button of course to see what happens. But, when I turn back on, the battery still won't charge. And the firmware update keeps failing. I tried everything according to instructions, but with no avail. Please help! My laptop is off now, so I will wait for solutions here before I turn it back on.

Read other answers
RELEVANCY SCORE 56.8

My Pavillion m9441it Elite has the Seagate 7200.11 HD with busy bug problem that I solved by following a tutorial on internet.The HP drivedetect.exe utility result is: Drive Name ST3750630AS - Sn 9QK0MMYZ - Rev HP24Now I would like to update the firmware. Sp40966.exe don't work on windows 10.I would like to know if I can apply the update on this page:http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=wk_91921_2&swEnvOid=4060#tab5sp52107.exe contains HP26_750.bat that contains the commandsf -m moose HP26CE3D.bin -s -f -v -b -x -i ST3750630ASThat seems made for my hd. Can anyone tell me if the update for workstations can go well for Pavillion PC as the m9441it model?Thank You

Read other answers
RELEVANCY SCORE 56.8

source





Seagate has issued an official statement today, acknowledging all recent problems with some Barracuda 7200.11 drives. Based on the information posted in the company's forums here, select Seagate Barracuda 7200.11 1TB 3.5-inch hard drives made in Thailand, suffer from a firmware issue that bricks the HDDs after a short period of time. After three to five months of normal operation these defective hard drives will suddenly lock-up as a protective measure and prevent the system from recognizing the drive from then onwards. In most cases the information won't be lost, but the drive will be completely useless, changing the drive's electronics won't help much either. This problem occurs not only to the 1TB Barracuda models, but to Seagate 1.5TB, 640GB, 500GB, 320GB and 160GB Barracuda 7200.11 drives, along with some Maxtor and ES.2 models. That's pretty disturbing, but now Seagate will provide its customers with an updated firmware if their drive is problematic.

Here's the full statement from the company's spokesman Mike Hall:
Seagate has isolated a potential firmware issue in certain products, including some Barracuda 7200.11 hard drives and related drive families based on this product platform, manufactured through December 2008. In some circumstances, the data on the hard drives may become inaccessible to the user when the host system is powered on*.
As part of our commitment to customer satisfaction, we are offering a free firmware upgrade to tho... Read more

A:Seagate Offers Firmware Fix for All Problematic Barracuda 7200.11 Hard Drives

Wow. Epic fail........ Lol.
That sucks that you have that. I was gonna buy one of those too.... *shudders*

~Lordbob

Read other 10 answers
RELEVANCY SCORE 56.4

This one ought to get a sticky; but, I'm not the one who has that power.

The new series of Seagate "Free Agent" hard disks are unfriendly to the Linux and Mac operating systems:
http://www.theinquirer.net/gb/inquirer/news/2007/12/06/seagate-snubs-linux
 

Read other answers
RELEVANCY SCORE 55.6

I'm running a T440s with two type A02 Ultra Docks. My OS is Linux Mint (currently 18.3, shortly to be 19.3). I have one dock (manufactured 14/06) with out of date firmware that I'd like to update to see if it resolves a problem (flickering display when laptop reconnects -- I've been using a KVM switch with two laptops). The newer dock is a replacement which hasn't exhibited the problem. It may be a hardware fault but would like to try a firmware upgrade. How can I do this? (ie., without re-installing Windows just to run this) My laptop doesn't undock properly -- I get a blank screen on both laptop and monitor. I know of but haven't tried the dockd solution available from github; I'll wait until I've tried a newer Linux kernel first. It would be helpful to know from now on what minimum kernel release is required for docking station functionality to work.

Read other answers
RELEVANCY SCORE 55.6

Dear ALLHow I could install the firmware sp64611.exe, in a COMPAC-Presario-CQ57-421SS, with LinuxMInt installed?Best regards

A:install firmware in Linux

@efueyo Basically, you can't -- which is why many of us retain dual-boot systems -- because most, if not all, of the system utilities provided by manufacturers run ONLY in Windows. HP distributes their utilities as compressed archives -- and the only tool I know of personally that can extract the components is 7-ZIP -- another Windows utility. If you CAN extract the components, you can see what they are, but most likely, the only executable parts are going to be MS Windows only.

Read other 1 answers
RELEVANCY SCORE 55.6

My USB-C to HDMI connection doesn't really work - almost always it doesn't see the external display, so I am trying to install the PD Firmware (Type C Firmware) update, version 1.3.  It goes through the steps but then I get an error message: Update ProgressBootloader is active. Proceeding to update firmware image #1Reading Silicon ID..Silicon ID of file (1F0011AF) doesn't match the device(0). Stopping update there is a similar post here where it was suggested to run msconfig with Diagnostic Startup, reboot, anf then try to run the PD Firmware Update utility.  I tried that but got exactly the same error message. Any ideas would be very welcome! thanks.

Read other answers
RELEVANCY SCORE 55.2

Hello,

I'm running CentOS 7 on E7470, and a few of the devices aren't working, like smart card reader, fingerprint reader, etc. According to some sources, deploying the latest ControlVault firmware/drivers package may fix some of those.
The native installer is built for Windows, and I was wondering if it'd be possible to do the upgrade by either booting a Windows portable/live version and running the upgrade, or, copying the installer to a USB and doing an upgrade in the way it's done with BIOS upgrades on Linux?
Perhaps LVFS? (Although compiling that on CentOS 7 is not really straight forward)
Regards,Milos.

A:E7470 firmware upgrade on Linux

Here's another (risky?) idea: There's a Windows 10 VM running on top of libvirt/KVM, and I can do USB passthru of Broadcom 5880. Driver isn't applied by default, so I'm tempted to try how wrong might things go if I were to install ControlVault2 firmware and drivers for these devices as they're passed thru to the VM.
Any thoughts are greatly appreciated.

Read other 3 answers
RELEVANCY SCORE 55.2

Does anyone have any infomation regarding Lenovo's plans for extending their support of LVFS to ThinkCentre machines? ThinkPads and ThinkStations are becoming well-represented but it seems as if Lenovo is intentionally choosing to ignore Linux users who choose ThinkCentre.

Read other answers
RELEVANCY SCORE 54.4

Hello, I received the mail from Lenovo about the Thunderbolt Software and Firmware updates but from the documentation[1], I see the software update is only available for Windows 10. Is Linux affected? Should I update only the firmware? [1] https://pcsupport.lenovo.com/it/en/solutions/ht508988

Read other answers
RELEVANCY SCORE 54.4

Hi, I'm trying (unsuccesfully) to apply the latest firmware upgrade (1.18) to my T470p laptop, using the only OS I have: Ubuntu 18.04. I tried downloading the CD ISO (r0fuj18wd.iso), flashing it to a USB pen, but the laptop refuses to reboot from there.Further notes:-) from BIOS: I restored defaults, and I also secure boot; my current firmware is 1.17-) I tried both flashing the .iso directly to the USB flash (that shows up as /dev/sda), using dd or other USB flashing tools (even unetbootin from a Windows laptop), and also to create a FAT32 or FAT16 partition, then flash into /dev/sda1, setting also the bootable flag on the partition with fdiskThe result has consistently been the same: when I reboot, after selecting boot menu and temporary boot device, I choose the USB drive, but it doesn't boot anything from there. On a related note, when I insert the USB disk, I see an empty disk labelled "R0FET44U".Is there anyone who succesfully managed to install such a firmware upgrade from Linux and might have a useful hint ? Thanks!

A:T470p firmware upgrade from Linux Ubuntu 18.04

From what I have read, some USB / thumb drives just don't work properly.(sounds stupid I know ... but ........................) So my suggestion would be to write the image to several other "diverse" thumb drives and try them.........

Read other 1 answers
RELEVANCY SCORE 54.4

Hi,
Is there any way to read out version of firmware on wd15 docking station from linux?
Is there any way to update firmware of the wd15 docking station from linux or bios?
Does instruction https://www.dell.com/support/article/us/en/19/SLN171755/updating-the-dell-bios-in-linux-and-ubuntu-environments?lang=EN
work for wd15 firmwares or is that only for laptop bios?
if instruction works do I need to use seperate wd15 firmware
    http://www.dell.com/support/home/us/en/4/Drivers/DriversDetails?driverId=84W5N
or one bundled with windows driver package
   www.dell.com/.../drivers

Read other answers
RELEVANCY SCORE 54

Hello, maybe someone can help me out with the problem I have upgrading the firmware of my T470s. The installed version is 1.11 (from June 2017, I think.). It runs archlinux and is no dual boot system i.e. there is no windows version on it anymore. I have learned that one of the usual ways to update is using the tool fwupdmgr. When I run the tool with "fwupdmgr update", the output is "No releases found for device: Not compatible with firmware version 0.1.11, requires >= 0.1.14" Maybe it is possible to install the current system firmware (which is 1.33) directly with "fwupdmgr install <xyz>.cab", but I don't dare to do so because I don't want to brick the hardware. So my question is: Can this be done savely and if not, is there any other way to upgrade the firmware without using windows? Thanks and kind regards

Read other answers
RELEVANCY SCORE 54

There is a new firmware release (FWNV15) for the NVMe SSD of the X1 Carbon 5th. I'm wondering if there is a way to perform the upgrade on a machine with no Windows installed on the internal SSD?
 
I've installed Ubuntu on the NVMe SSD and have a external USB Drive with Windows 10.
 
I tried to run the Firmware Update Utility on the "external" Windows 10 but no luck so far. Windows reboots and after it's up again the utility just shows some generic error message.
 
Also, there doesn't seem to be a booteable ISO.
 
Any recommendations on how to upgrade the firmware with my setup?
 
Moderator Note: Edited subject to match content.

A:Upgrade NVMe SSD firmware to FWNV15 (X1 Carbon 5th Gen) on Linux

The upgrade utility sometimes fails before it reboots windows with a message like "can't initializie linux system". So I investigated further and found that the updater in fact is an ELF binary  $ file fwupdater_i686_Win10_LPMoff
fwupdater_i686_Win10_LPMoff: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), dynamically linked, interpreter /lib/ld-linux.so.2, for GNU/Linux 3.8.13, not stripped Which also seems to be pretty easy to use: $ ./fwupdater_i686_Win10_LPMoff
PROGRESS --- start firmware update.
Usage ./fwupdater_i686_Win10_LPMoff <Model> <Serial> <Firmware> [Option]
Model : Drive Model Name.(Mandatory)
Serial : Drive Serial Number.(Mandatory)
Firmware : Firmware Image file path.(Mandatory)
Option : Additional Option string starts with `-'.(Optional)
PROGRESS --- completed with status(8). And the necessary info which firmware to use is in a file called fwwinsd.pro: $ cat fwwinsd.pro
"THNSF5512GPUK TO","5KLA5102","5KLA5104","TINYCORE","fwupdater_i686_Win10_LPMoff","5KLA5104_NVME.sig","L","TOSHIBA"
"THNSF5512GPUK TO","5KLA5103","5KLA5104","TINYCORE","fwupdater_i686_Win10_LPMoff","5KLA5104_NVME.sig","L","TOSHIBA" However, I'm not absolutely convinced I'm brave enough to run this utility  Is anyone from Lenovo in this forum who is willing to confirm my findings?

Read other 9 answers
RELEVANCY SCORE 53.2

I am trying to upgrade my current BIOS (1.21) on my p51s running ubuntu 18.04.2.  to the current 1.38  (n1vet48w.cab).  When I follow the instructions in the readme here https://download.lenovo.com/pccbbs/mobiles/n1vet48w.txt  of using fwupdmgr install n1vet48w.cab I get "No supported devices found"or if I try fwupdate -lfrom insided the extraced cab file, it returns noting. What am I missing?  How do I upgrade the firmware on my laptop?  

Read other answers
RELEVANCY SCORE 53.2

A warning for X1C6 users on Linux. With the latest Intel Management Engine Firmware update, versioned 11.8.65.3590, S3 sleep is broken. The system will drain a fully charged battery in a matter of hours under the new firmware, and it is impossible to downgrade the firmware. This is with the "Linux" sleep state option enabled in BIOS, and everything was working correctly before the upgrade. Lenovo, please address this issue and ensure proper QA for your Linux user base going forward - this is unacceptable.

Read other answers
RELEVANCY SCORE 53.2

I would make a statement with good confidence that either the P70/Xeon EFI firmware or Intel's RST Matrix driver (md raid) is broken. It is not possible to run 2 Nvme drives in RAID on Linux on the P70. None of the Linux distributions I tried (Redhat, CentOS, Arch) seems to be able to see the the disk array. RST & Nvme modules and Nvme-CLI are loaded, but mdadm and nvme-cli are unable to see the array. Everything seems to work, as long as the SATA controller is NOT put into RAID mode. Bummer. Hardware:P70/Xeon(EFI 2.12) + 2x Intel 6000p Nvme (FW1.0) 

Read other answers
RELEVANCY SCORE 50

In README, new firmware version is "W887904". But my SSD current firmware is "3887904"."W887904" and "3887904" are not same. But is it correct that "No new firmware found."? Or Levono utility program can't find firmware file? "No new firmware found." is too hard to understand. I think better, "No need to update firmware...".... Levono utility program can't find firmware file? "Solid State Drive Firmware Update Utility for Windows 10 (64-bit), 8.1 (64-bit), 8 (64-bit), 7 (32-bit, 64-bit) - ThinkPad FWSD48 19 Oct 2018" is not easy to use. 

A:X1 Carbon SSD Current Firmware 3887904, New Firmware is "None", "No new firmware found." is normal?

Welcome to the CommunityWhat's the laptop MTM code?What's the SSD p/n as well its FRU code on the drive sticker?Could you provide the SSD sticker photo?

Read other 1 answers
RELEVANCY SCORE 49.6

Howdy,I've got a t460p thinkpad, running win10.  It has the dock, and 2 monitors are usually attached to the dock.My lenovo system update wanted me to install the critical security [urgent] update to my intel management engine, the update is to version 11.8.55.3510.  I followed all the instructions, closing nearly everything and the update proceeded normally and quickly, until it froze. The system updater says "installing: Intel Management Engine 11.8 Firmware - 7 [32/64]/8.1/10 [64]"  and"Overall Progress:  91%"The cmd window that's showing the actual install says "FW Update:  [ 99% (-)] Do Not Interrupt"  but the little progress spinning thing has not spun in a long time. (40+ minutes)Every so often (every 5mins?), it the upper progress bar in the "system update" will backup a little bit...then it will move forward again a minute or so later. Umm...I need to use my computer.  It's been about 45 minutes that I've been looking at this screen with no change (other than the backup-forward cha-cha in the gui progress bar).(image to help) (the progress bar is in it's full position, this is what it looks like after the top progress bar moves forward again after backing up a wee bit, when it backs up, it just doubles that gray area at the end, it doesn't move back a whole lot).I am guessing I cannot restart at this point. Can I abort the install and try again? 

Read other answers
RELEVANCY SCORE 49.6

 Hi there,  I would really appreciate help in relation to this ongoing error. I am prompted by Vantage on regular basis to update the SSD firmware from 6L7Q to 7L7Q. Using Lenovo Storage firmware update tool 1.103. Fails every time, has been like this for months so I am not expecting an auto update fix.  Tries to do it, gets to reboot, and then the error below appears.  "software condition is not ready to update due to some condition" I have also downloaded from Lenovo website manually, and have run the zipped version, with same result. I have looked up Samsung SSD drivers directly and there is no options for this drive. Has anyone had similar issue? Please let me know if you have a fix.  Many thanks.  

Read other answers
RELEVANCY SCORE 49.6

Hi, since a couple of weeks, system update prompts me to update my NVMe disk firmware. It downloads and runs Lenovo Storage Device Firmware Update Utility, but it always fails with the same error: Update Failed: Firmware update FAILED! RC=0x1 Stopped by a device reason.  This happens to me with the last version of the firmware update toot (FWNV29), but also has happened to me with previous versions. Also, downloading FWNV29 and running it independently from system update leads to the same error. Can someone help? Thanks. The log from fwwinsd.exe (fwwinsd.log) shows the following:[2019/03/27 07:47:09]: CFWWinDlg::OnInitDialog - IN
[2019/03/27 07:47:09]: CFWWinDlg::OnInitDialog - OS : Windows 6.2 Build 9200
[2019/03/27 07:47:09]: CFWWinDlg::OnInitDialog - Current path : C:\Users\fpiris\Desktop\FWNV29
[2019/03/27 07:47:09]: CFWWinDlg::openProfile - IN - fwwinsd.pro
[2019/03/27 07:47:09]: CFWWinDlg::OnInitDialog - Profile verified to exist
[2019/03/27 07:47:09]: CFWWinDlg::disableAutoODDPowerOffFeature - IN
[2019/03/27 07:47:09]: CFWWinDlg::disableAutoODDPowerOffFeature - Open registry key : Software\Lenovo\PWRMGRV\Data
[2019/03/27 07:47:09]: CFWWinDlg::displayDrives - IN
[2019/03/27 07:47:09]: CATADrivesScanner::scan - IN
[2019/03/27 07:47:09]: CATADrivesScanner::cleanUp - IN
[2019/03/27 07:47:09]: CATADrivesScanner::enumerateDevice - IN : GUID=0x53f56307
[2019/03/27 07:47:09]: CATADrivesScanner::enumerateDevice - Device info se... Read more

Read other answers
RELEVANCY SCORE 49.6

Lenovo Vantage updated the T480s BIOS on 8/9. I immediately started getting a Thunderbolt error when starting Windows 10 64, which says to update the Thunderbolt firmware. I downloaded the current firmware from Lenovo (n22th06w) but I get the following error when trying to update: 0x20D SDK_INVALID_OPERATION_IN_SAFE_MODE What's the solution, Lenovo? Thanks.  

Read other answers
RELEVANCY SCORE 49.6

Hello, I have Carbon X1 5th (20HR) running Windows 10 pro (updated).  Altought I followed the instructions here - https://pcsupport.lenovo.com/cy/en/downloads/ds120390 (This is the page for Lenovo users who wish to update TPM firmware) - and installed the "BIOS Update Utility for Windows 10" version 1.33, Windows still keeps telling me to update the TPM firmware driver.  In BIOS it shows that I have TPM ver 2.0, enabled. Since Windows kept telling me to update the TPM driver, thanks to Google I found out that there is a tool created by Lenovo called "TPM Firmware Update Utility -ThinkPad" (It is worth noting that this tool is not mentioned on the instruction page). I downloaded the tool, but can't understnad how to use it (assuming that I should use it at all, because this tool is not mentioned on the TPM instructions page). Could you please help me to solve the TPM issue described above? Is there a way to check what version do I have? Thanks in advance!  

Read other answers
RELEVANCY SCORE 48.8

Can't boot USB after update firmware and all from update software tools   

A:Can't boot USB after update firmware and all from update software tools

I'm close secure boot and setting boot order and use boot menuThis USB disk its ok before I update all from Lenovo updateAfter this action, I lost my boot USBPlease Check your firmware.And Help me how to fix this

Read other 2 answers
RELEVANCY SCORE 48.8

Hi there, my Helix laptop (purchased a few years ago) is giving me the "Keyboard Dock Fan Error" at startup. I am then unable to use the keyboard and mouse pad. I previously had this same error a couple of years ago and had solved it using the Firmware update.Now I tried:- BIOS update. Done updated to the latest BIOS version.- Tried doing again the firmware update (although I had done it a couple of years ago) but now I have Windows 10 and the firmware update executable on the Lenovo site says it is for Windows 8 or below. I tried it anyway but it gave an error saying: "This tool and EC firmware mismatch, or communication error is happened.".  Your help is much appreciated.- Najib

Read other answers