Over 1 million tech questions and answers.

Remote Desktop: Win 7 Home Prm can't connect to Win 7 Ultimate

Q: Remote Desktop: Win 7 Home Prm can't connect to Win 7 Ultimate

Hi All.

I have a Win 7 Home Premium box along with 4 WinXP boxes in a simple network. My Win 7 box can Remote Desktop to any of the WinXP boxes, and be used to "drive" them, no problem.

I added a new machine yesterday that came with Win 7 Home Premium. After searching through other threads, I found it was stated that if I upgrade the new box to Win 7 Pro or Ultimate, I can then use my original Win 7 Home Prm to connect to, and "drive" the new Win 7 Ult. box.

I successfully upgraded the new box, it's now confirmed to be running Win 7 Ultimate. I have also disabled the firewall, and checked the Remote Box Settings:
Allow connections from computers running any version of Remote Desktop (less secure)..

However, the Home box cannot connect to the Ultimate box. It times out with the following error:
Remote Desktop can't connect to the remote computer for one of these reasons:
1) Remote access to the server is not enabled
2) The remote computer is turned off
3) The remote computer is not available on the network.

All three of these conditions are false.

Please help!!!

Thanks,
Jerry

PS - I can ping the machine, so it's "there" in some form or fashion...

RELEVANCY SCORE 200
Preferred Solution: Remote Desktop: Win 7 Home Prm can't connect to Win 7 Ultimate

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Remote Desktop: Win 7 Home Prm can't connect to Win 7 Ultimate

Hi Jerry,
Remote Desktop is not available in Win7 H Prem.

Read other 1 answers
RELEVANCY SCORE 99.6

Any help gratefully received...

Here's my issue
Setup:

Wired home network behind a NAT enabled router to cable modem to internet
provider.
2 Vista pc's and 1 XP
No software firewalls because of NAT on router
Windows firewall disabled although checkboxes for remote desktop are
checked
Norton 360 installed for virus protection but firewall disabled
Security settings for blank password access enable (as described in
"http://www.mydigitallife.info/2008/06/17/trick-to-enable-and-allow-windows-xp-and-vista-remote-desktop-login-without-password-or-with-blank-null-password/"
for example)
All stations have remote desktop enabled
Allowed RD connections running any version of windows
All pc's are visible on the network tree and I can browse directories and
files from any station using windows explorer
I have not added any additional users except for the default id I use to
log in at each station which is granted by default according to the "Select Remote Users..." option in System Properties/Remote

Problem:
From a Vista box I can start remote desktop and log in to the XP box no
problem

From the XP box (via the remote connection or by sitting directly at the XP pc) I bring up remote desktop and select a Vista box by name or by ip address I get the message "This computer can't connect to the remote computer"..

I've done a lot of searching on this issue but can't find a solution!


Next problem is to get web access going v... Read more

Read other answers
RELEVANCY SCORE 78.8

Earlier today i disocvered how to set up a remote desktop. I connected my laptop to my server and an employee's computer easily/quickly with no problems.. but i can't do the same when i'm @ my home network.

Please note. that when i was able to connect i was on the work network, but i was connected wirelessly.. but it was using the same IP "family" if you will as the server and the other workstation

I am wondering if there is something i need to configure to get this fixed?
 

A:Remote Desktop - Cannot Connect from Home

Read other 7 answers
RELEVANCY SCORE 77.2

I'm afraid I might already know the answer - is it true the only Professional and Ultimate versions of Windows 7 can accept Remote Desktop Connection requests? I read on a post from 2009 that "any version of Windows 7 can act as a Remote Desktop client, but only Ultimate and Profession can host a Remote Desktop."

I'm not sure I completely understand that - I do understand what host and client mean.

However,d despite lots of different setting changes, I can't connect to this Windows machine using Remote Desktop.

In my job at IBM, I connect to hundreds of computers daily using Remote Desktop, easily. That's why the OS version issue seems like a strong, but frustrating, possibility.

Thanks

A:Remote Desktop can't connect to Winows 7 Home Premium

The host in remote situations is the person taking control.
The client is the one being assisted.

Read other 1 answers
RELEVANCY SCORE 76.4

So I go on vacation and i want to use my remote desktop function to access my home desktop. I guess I could send out an invite to myself, but once that is gone it is gone. If i just have remote desktop running how do I find connect to the computer remotely? do i need to forward a port or what? What do people normally do?
 

A:Solved: Remote Desktop : How do people outside a home network normally connect to themselves?

Read other 7 answers
RELEVANCY SCORE 66.4

We have several remote systems that can all connect fine. I am having an issue with one box. It is a windows 7 home premium machine with netgear wireless nic. When I open mstsc to connect to a remote machine I put in the ip address and click on connect. I receive an immediate failure with the text "This computer can't connect to the remote computer. Try connecting again...blah blah"

I have a server 2008 r2 with Network level authentication enabled. I have 8 other systems that are hardwired, at different geographic locations and all connect fine.

I have not made any changes on the server side since this problem seems to be local to this client only.

On the client I have made the following changes/observations. I have disabled the firewall, cleared the remote desktop cache, remove the MRU entries from the registry, verified that port 3389 is open via telnet. I have been bashing my head for days trying to figure out why this one box is not working. The problem occurs for every user on the box including the admin.

I don't receive the box that prompts for warning if there is a server authentication issue but I think that is because I selected ignore at some point and said yes to continue. I'm not sure where that cache resides to delete that selection. I'm not sure if that is where my problem lies or not. Can anyone please assist?

A:Remote Desktop Client 6.1 Cannot connect to remote computer

Welcome to SF,

From the Remote computer please try this, if unsuccessful please post back.
Click on Start and type secpol.msc. Then go to Local Security Policy=> Local Policies=> User Rights Assigment=> Choose Allow Log on Locally and select the User or Group that needs to access this computer remotely. Also select Allow Logon to Remote Desktop Services (if you have RDS or Terminal Services configured in your Win08 Server). Try to remote connect after.

Read other 1 answers
RELEVANCY SCORE 66.4

So, I had remote desktop working on my computer for about two years and now it doesn't work anymore. Every time I try to access it from another computer (I don't have and don't know how to get a domain name, so I just use my IP address, which I get from whatismyip.com), I get an error message saying I cannot connect to the remote computer.

As far as I know, I have done everything right. I enabled remote desktop in system properties, I created a static IP address in TCP/IP properties, and I configured my router to forward the default port (3389) to the correct local IP address I specified. I have disabled windows firewall and put mstsc on my list of exceptions for the firewall that I use (BitDefender). I also pinged my IP address and received all packets sent.

I am running windows xp professional with sp3.

Any suggestions?

A:remote desktop problem: cannot connect to remote computer

try using the computer name to connect right click on the my computer icon and select properties and then the computer name use the full computer name. while your in there check the remote tab make sure the allow user to connect remotely to this computer is checked. on both pc's. also make sure both machines have xp pro i know you can only go one way between pro and home edition can't remember which.

Read other 14 answers
RELEVANCY SCORE 65.6

Ive followed the instructions to a T, & cannot get a remote access connection to my computer using the "Microsoft remote desktop connection" app for iOS. Ive watched youtube videos and followed other directions only to no avail. When I signed up for internet & installed the modem/router(s), the first thing i did was alter my routers default wireless gateway from a 192.168.x.x to my own gateway for security reasons. I also changed the default web interface login credentials. So i am familiar with the web UI of routers & I have spent many hours looking up most of the options that can be configured in the web UI of the many routers I have used & I dont think it has to do with the web UI, I think its something that involves my PC settings. I have another remote desktop app that flawlessly connects to my PC & is extremely fluid in its access, but its a third party app on an inactive andriod device. I'd really like to use the "official" Microsoft remote desktop connection app on my active iOS device &, just as important, know & understand what is preventing access to my computer with this app. I also use the "mobile mouse" app as a remote mouse & keyboard for my computer & its on my active iOS device. So any help is much appreciated

A:remote desktop connect issue via MS remote desktop app

You have to be able to open the ports for RDP on your router/gateway, along with if you have a Dynamic IP that may change, have to use a Dynamic DNS option like OpenDNS. You would really be better off using Teamviewer.

Read other 11 answers
RELEVANCY SCORE 65.2

After installing an update for QuickBooks it needed to restart the computer. After doing so I could no longer connect to this computer via remote desktop. This computer is a workstation in an Active Directory domain. Remote Desktop Access is controlled by
Group Policy. All other Windows computers in this domain can be accessed via Remote Desktop. This computer can also remote desktop to these other computers. On the settings, Remote Desktop is set to "Allow connections from computers running any version
of Remote Desktop." I've verified the Remote Desktop port is enabled in the firewall. I've taken down the firewall completely. I powered off and back on the computer several times. I've run 'gpupdate /Force'. This computer can access the network, including
shared drives, can access the Internet and can Remote Desktop to other computers. This computer can ping other computers, but other computers cannot ping it. Other computers can no longer mount this computer's shared drive. In case there was some update-culprit
lurking that didn't take effect until I restarted, I rebooted other workstations in the office to see if the same thing would happen. It didn't. Only this computer.
I've spent hours on this and search for all kinds of solutions. I've out of ideas. Anybody?

Read other answers
RELEVANCY SCORE 64.4

Hi All,

New user and my first question to the forum, 1 of PC's at work is having
an issue with RDC, normally I'm able to to log into this computer
from other computers from my work site but I noticed yesterday
I was not able to do this anymore.
After having a look I noticed when you right click on computer
than click on remote settings, under advanced tab there
should be
Remote Desktop
Click an option, and than specify who can connect, if needed.
and than follow by the options, but now it's blank with nothing there.
(see photo) Nothing has been changed to the PC and I'm puzzled to
why this has happened.
Need to get this sorted ASAP so if anyone could help that would be great.

Thanks.

A:Remote Desktop Settings Missing For Win 7 Ultimate

  
Quote: Originally Posted by rocstar


Hi All,

New user and my first question to the forum, 1 of PC's at work is having
an issue with RDC,....


Welcome to the Seven Forums.

We try to stay away from making changes to work related computers because we could be countering the wishes/settings of IT staff. Do you have an IT help desk or IT staff at work?

Read other 9 answers
RELEVANCY SCORE 64.4

Hi there
I couldn't find a specfic forum for this question, so sorry but it had to go here!

I am running an 8-channel DVR card for a shop's security and it works fine for the most part. However I'm having troubles with the remote view through IE (via ActiveX controls) It works fine from any XP machine and it seems from Vista Home, but not from a Vista Ultimate machine (and I've tried from both 32 and 64bit versions) - The conection is fine, IE brings up the same interface, but the video images do not appear.

The manufacturer can't (or won't) help me out with this (as from his point of view it works fine as he has a Vista Home machine that can login pefectly) so I was thinking there must be someone who might have an idea of something I need to tweak.

I've tried turning off all the fancy Aero stuff, different graphics modes and resolutions, to no avail. I've tried disabling firewalls also.

Does anyone have any idea where I might start tweaking next? I could understand if I couldn't get it working from a Vista machine full stop, but considering it works from any XP machine, and from a Vista Home machine, there must be something I'm missing!

Any help would be appreciated.

Read other answers
RELEVANCY SCORE 62.8

Hi,

Currently when to try to remote desktop to a Windows 7 Ultimate PC, all the active windows and moved to a single screen, even though before i connected, there were active windows on both screens of the PC. Have anyone else come across this issue?

Thanks.
 

A:Remote Desktop does not save window position for Windows 7 Ultimate

I think that's because when you connect to a remote machine, it doesn't provide you with both screens. RDP does not give you dual screen access.
So if the remote machine has 2 screens and your client machine has 2 screens, it will still only open up the remote session on the one monitor.
Hope this makes sense.
 

Read other 2 answers
RELEVANCY SCORE 62.8

Hi,

Currently when to try to remote desktop to a Windows 7 Ultimate PC, all the active windows and moved to a single screen, even though before i connected, there were active windows on both screens of the PC. Have anyone else come across this issue?

Thanks.

Read other answers
RELEVANCY SCORE 61.6

I have a desktop HP (windows 7) and a new macbook pro 15 on which i am running both mac os x and windows 7. I can connect from my desktop to my laptop using remote desktop connection but not the other way around. I have a network set up and can see the computers are connected. I opened port 3389, enabled remote access on both machines, turned off firewall, avg, everything but nothing works. Whenever i try to connect it says initiating remote connection for a while then says 1) remote access is to the server is not enabled 2) the remote computer is turned off, 3) the remote computer is not available on the network. Btw both machines have Win 7 Ultimate. Any suggestions would be appreciated.

A:Remote desktop wont connect to desktop.

I would try downloading this application and see if you still have the same problems.

Connect Across Platforms with Remote Desktop Connection | Mactopia

Read other 9 answers
RELEVANCY SCORE 60.8

I used to be able to log into Citrix and then go to my remote desktop. However, my computer was slow/family was complaining, so I downloaded MyFasterPC (I know bad thing to do) and after I ran the scan, my computer was faster, however, now I can't get to my remote desktop to the site that I work for. I can log into Citrix. My username/password work, however, when I go to click ont he V__remote desktop, it just makes a clicking sound and then nothing happens. I get this message:

Some of your resources cannot be reconnected even though they may be available for reconnection. If this message does not usually appear during your sessions, contact your system administrator.

I know this account works, because if I log on to my laptop and go to this site, everything works great.

I have goggled a lot of things, and it is to technical or don't really answer my question. I would like to get this working again on my home computer as it is quicker than going through the laptop wireless.

Any help is appreciated. I think something happened in my registry when I did the MYFASTERPC.

Also, I did go and remote the Citrix plug in and then re-install the Citrix plug in. Again, I can log in, but can't get to my remote desktop

Thanks Again -

Read other answers
RELEVANCY SCORE 60.8

I am the administrator for my church's networked computers. My work computer is running Windows 7 Pro. I have a need to access my computer from home. My home computer is running Vista Ultimate 64. I sent an invitation from the work computer which I have received at home. When I double-click on the invitation file, the file opens in IE as html and I cannot connect to the remote computer. Any insight will be helpful.

A:Remote Desktop does not connect

I've never been a fan of MS remote desktop connection because of the permissions and OS compatibility issues. This is why I like to use TeamViewer. A very simple and easy to use piece of software.

TeamViewer - Free Remote Control, Remote Access & Online Meetings

Read other 3 answers
RELEVANCY SCORE 60.8

Getting "Unable to connect to remote PC. Please verify Remote Desktop is enabled, the remote PC is turned on and available on the network, and then try again" error when I am trying from MacBook

Read other answers
RELEVANCY SCORE 60.8

I was just trying to connect through Win7 to one of my systems using Remote Desktop Connection. I've done it several times before however something's wrong it's not working now. I even shut my AV Firewall and Windows Firewall off and I still can't connect. I checked to make sure RDC was enabled, I checked the services were up and running, I check to make sure the ports were properly forwarded, everything looks good. The one anomaly is when I ping the computer I'm trying to connect to I get "Request timed out." I just don't understand what has changed? I don't remember changing anything and it's been working. The system I'm trying to remote into is online connected to the net just fine. Anyone have any suggestions?
 

Read other answers
RELEVANCY SCORE 60.8

Windows Vista to Vista (Home Premium). i have the ip address for remote computer, but it does not recognize it.

A:Remote Desktop won't connect

Maybe you did not enable the Remote Desktop correctly, take a look on how to enable Remote Desktop in Vista here.

Read other 4 answers
RELEVANCY SCORE 60.8

I can remote desktop from host PC to laptop, I can ping both ways, but everytime I run remote desktop from laptop to host I get the "your remote desktop connection has ended, possibly for one of the following reasons

- The administrator has ended the session
- An error occurred while the connection was being established
- A network problem occurred

- Host PC is running XP Pro
- Laptop is running windows XP media center edition

I have tried all the updates I could find. Ran all the microsoft updates it autodected was missing and still can't get the laptop to remote desktop to the host PC any ideas? Any help would be great I am completely stuck and out of options to try.

Laptop and Host both now have static IP's. I am using usernames in the admin groups with passwords. Both machines have ports open. Allow users to connect on both computers are checked to allow.

Again any help you could provide would be awesome.
 

A:Remote Desktop can only connect one way

Any 3rd party firewall on the "host PC"? If so, maybe it is blocking the connection.
 

Read other 2 answers
RELEVANCY SCORE 60.8

Hello all,

Today I setup a new user on my computer, smartly named Server (with an equally easy password ). Basically this is for my house mates.

Now, I've setup everything so we can all remote desktop connect and login as user Server, however I would like to know if two users can be logged in at once.

Basically, I wish my administrator user "Wade" can be logged in, while somebody remote desktop connects to Server and can do so, without Wade having to logout.

OS: 7 Ultimate
PC: 3.0Ghz Dual Core
RAM: 8Gbs DDR3
HDD: 1.5TBs
GFX: NIVIDA 220 GT 1GBs DDR3 Dedicated
 

Read other answers
RELEVANCY SCORE 60.8

I have three computers that I use as "servers" that connect to during the day. One of them work perfectly. No matter what, I am able to connect all the time without issue. For the second, I can connect most of the time. But sometimes it just hangs and I am unable to log in. The third one, which I am asking about in this thread, I just tried to connect the first time and have not yet been able to do so.

1. I enabled remote desktop under system/remote settings
2. I enabled remote desktop through my firewall. I created a new rule that enabled incoming connections to 3391.
3. I enabled remote desktop services via services.msc
4. I programmed my router to forward port 3391 to my computers IP address
5. I am using no-ip to give me a static address (i.e., xxx.serveftp.com:3391) to use with remote desktop.

But after all that, I am unable to get this to work. Any ideas on how to fix the problem? Thanks.

A:Cannot connect using remote desktop

Can anyone help?

Read other 6 answers
RELEVANCY SCORE 60.8

I am having problems connecting to my PC using (MS) Remote Desktop.
When I run netstat -a I cannot see any service listening on port 3389.

I did have pcAnywhere installed (which I have since removed) and I am wondering if this has kicked off the problem.

I have tried everything, all the usual options are selected (My Computer > Remotes > Allow Users To Connect To This PC etc.) and Terminal Services are active in Services but I just CANNOT get a remote connection.

Is there any way I can get the RD service to run (via a DOS command or otherwise) so that it listens on port 3389 for incoming TCP connections?
Any ideas?
 

A:Remote Desktop will NOT connect

Read other 6 answers
RELEVANCY SCORE 60.8

I am having problems connecting to my PC using (MS) Remote Desktop.
When I run netstat -a I cannot see any service listening on port 3389.

I did have pcAnywhere installed (which I have since removed) and I am wondering if this has kicked off the problem.

I have tried everything, all the usual options are selected (My Computer > Remotes > Allow Users To Connect To This PC etc.) and Terminal Services are active in Services but I just CANNOT get a remote connection.

Is there any way I can get the RD service to run (via a DOS command or otherwise) so that it listens on port 3389 for incoming TCP connections?
Any ideas?
 

A:Remote Desktop will NOT connect

im not promising that this will solve the problem but when i tried to use remote desktop. THIS WORKED FOR ME. and im not sure if it will work for you. i had to change something in the local security settings. I forgot what it was but i think this is it. Start > controll panel > adminstrative tools > local security policy . and under user rights assignments there is access this computer from a network and allow login thru terminal services. im not sure which one it is but i think its the 1st one. then under propertys do add user or group.. advanded... find now.... select all that are listed then OK. Also make sure that you have "Allow users toconnect to this computer remotly" enabled under system propertys. Then you should restart i guess. If this doesnet work than whatever... but thats what i did and it worked.

If i am wrong and it doesent work, then check out TightVNC. i use it to remotly controll computers over LAN you could use TightVNC as a alternitivate. I use it, its great. If your trying to connect over the internet. Use Radmin ... its the same as pcanywhere but smaller and easier to use. You have the choice to not use it, im not forcing you.
if im wrong im sorry
 

Read other 3 answers
RELEVANCY SCORE 60.8

I have a desktop computer at home running windows 7 ultimate, and I'd like to be able to access it with my laptop, running windows XP home edition. I've configured my desktop to allow being connected to by all versions of remote desktop, and indeed I can connect to it with my laptop while at home (that is, when both desktop and laptop are in the same network). I do that by entering either the desktop computer's name or its private IP address (the one assigned by the router). I've made sure to forward the 3889 port to that specific computer.
Of course, the whole idea is to be able to access my desktop while not at home, but I can't seem to be able to do that. I enter the IP provided to me by my ISP, and I get the message that "this computer could not connect to the remote computer. try connecting again. if the problem persists, contact the owners of the remote computer or the network administrator" (I'm translating, my XP is in Hebrew). Trying again does not help.
Also, I don't know whether this is significant or not, but if I try to connect to my desktop with my laptop while at home, I can't do that by using the gateway's IP. I have to use the private IP address.
just to be sure, I've tried disabling the resident windows firewall and my antivirus, but it did not help.
I'd appreciate your help!
Nadavu
 

A:Can't connect with remote desktop across the net

Read other 11 answers
RELEVANCY SCORE 60.8

Not sure where to post this but I've been having a problem connecting to the office server from one of my laptops. This problem has only occurred on this one laptop, meanwhile every other computer I have has been able to successfully connect when I tested them out so I think there's something I've forgotten to do? Every time I type in the server address and click connect on this laptop, I get a:

"Remote desktop can't connect to the remote desktop for one of the following reasons: 1) Remote access to the server is not enabled (which it is) 2) Remote computer is turned off (it's not) 3) remote computer is not available on the network (pretty sure it is) Please make sure the remote computer is turned on and connected to the network, and that remote access is enabled."


I tried turning off the firewalls but still get same message. Not sure what to do at this point. This laptop I'm on has windows 7.

A:Can't connect using Remote Desktop

See if Hidden Admin user account can get through - Enable Hidden Admin Account - sysnative.com

Read other 7 answers
RELEVANCY SCORE 60.8

We have a dlink di-524 wireless router connected to our surfboard sb4100 cable modem. This router has two different methods of accesses, four electrical ethernet ports and one wireless port. The problem only occurs when trying to access PC at the office using Windowís remote desktop. While this problem is occurring the laptop and desktop will still have access to the Internet. Thereís clearly something up with the router and hereís how Iíve been getting around it.

Power down dlink, make certain only PC#1 is powered up and connected to dlink. Power up the router, wait for the PC#1 to acquire IP address then launch browser and it navigates to google, next launch SonciWall VPN and it connects, open a remote desktop connection to office PC successfully. If all this works then Iíll make a record of the IP address. Then on PC#1 change LAN properties by un-checking DHCP, add IP data from >cmd ipconfig /all as static, recheck browser, reconnect VPN, reconnect RDC. Finally Iíll make similar static change to PC#2. As long as only one PC is powered or connected this crazy method works fine until the router looses power for whatever reason. Had our share of IP conflicts but this static process allows the RDC to work from multiple PC behind the same router.

Whatís a bit strange to me is my spouse uses the same router without experiencing this problem. Heís able to access multiple remote desktop computers from his office using wired or wireless. Heís had four Remote session... Read more

A:Only one IP can connect using remote desktop

Read other 10 answers
RELEVANCY SCORE 60.8

Hey Guys,

So I need some help. I currently work on a computer for a town, but I live 60 miles from there. I'm trying to get remote desktop to work to help me out with this.

The setup is as follows:

My computer: Windows Vista Home
The computer i'm trying to connect to: Windows XP Home SP2
Router: Belkin Wireless N

I've enabled remote desktop on both machines, obtained the IP addresses, and also went into virtual servers on the router and put in 3389 as the ports so that it is all enabled. I type in the IP address and after about 30 seconds of thinking it comes back as it can't connect. I've tried this from a Windows XP Pro to an XP Pro machine as well and still get the same result. I use it at work all the time, so i'm familiar with it, but its also used on a network at work. I could really use some help!
 

A:Remote Desktop still won't connect!

What has changed on your end or at the town computer. You said it had worked prior? I would use UltraVNC (free) in this case. http://www.uvnc.com/.
 

Read other 2 answers
RELEVANCY SCORE 60.8

Hello,
I am facing an issue while attempting Remote Desktop Connection from Windows 7 Professional machine.
When trying to take an RDP of a Windows 2016 Server using "MSTSC - Microsoft Remote Desktop Connection" I get an error " This computer can't connect to the remote computer. Try connecting again. If the problem continues, contact the owner
of the remote computer or your network administrator."
However, when I select the "Connect and don't warn me" option in the advanced section of Server Authentication Tab (MSTSC), it connects.
Can anyone please guide me to resolve this problem ? Do I need to make changes at the server end or the Desktop level ?
The version of Remote Desktop Connection I am using is "Shell Version 6.2.9200, Remote Desktop Protocol 8.0 Supported"
Thanks,
Swapnil.

Swapnil Malpani

Read other answers
RELEVANCY SCORE 60.4

My home network centres on a LinkSys WAG200G router using WEP encryption and comprises the following wireless connections:

Dell XPS M2010 (Vista Ultimate 32 bit)
Dell Studio 1737 (Vista Home Premium 32 bit)
Sony VAIO (Windows XP)
HP C8180 Printer/Scanner
Nintendo Wii

Everything works correctly except the Dell XPS M2010 which connects to the network but as 'Local Only' and does not see the internet unless the following is followed:

1. Shut down/Log off all computers/printer/wii
2. Log on to Dell XPS M2010
3. Reset router (power off for 10 seconds)

It then connects to the internet and other machines may be started as required. If another PC is already connected when the M2010 is started up then it will not see the internet (still able to use printer and transfer files locally)

All operating systems are fully up to date and disabling Norton 360 or plugging the M2010 into one of the router's ethernet ports make no difference.

I've compared everything I can between the settings on the two Dell machines but can see no obvious reason for the difference in operation - please help!!!
 

A:Vista Ultimate will not connect to the internet but Home Premium will

Read other 16 answers
RELEVANCY SCORE 60.4

Hi,

A long time ago I started looking into this because my mum has a PC with XP Home on and I am running XP Pro (both fully up to date), however I seem to recall reading that you couldn't remote into a XP Home machine, only into a XP Pro machine, is this correct?

Ideally I would like to try and sort this out so I can sort out any problems with my mums PC if/when they arise without having to try and talk her through it on the phone which can be quite difficult at times.

Any advice or pointers would be very much appreciated.

PS. Not sure if this would be better suited in the networking forum or not? If so, feel free to move it.

Thanks in advance.
 

A:Remote desktop from XP Pro to XP Home

Read other 10 answers
RELEVANCY SCORE 60.4

Is there any way to install Remote Desktop (so I can remotely log onto it) on my Windows XP Home? If so, how?

TIA
 

A:Remote Desktop and XP Home

Read other 16 answers
RELEVANCY SCORE 60.4

I have two Windows xp home edition PCs connected on a workgroup through a Linksys wrt54g

I realize that the rdp server application is only on the professional edition of xp.

I was wondering if there was any freeware app I could use to turn my desktop PC into a terminal remote desktop server so I could access it with my laptop remotely using the remote desktop connection client app that comes installed on home edition.

Any suggestions?

A:Remote Desktop Over Home Lan

See if this will do:LogMeInhttps://secure.logmein.com/go.asp?page=productcomparisonOr this:VNChttp://www.realvnc.com/products/features.html

Read other 7 answers
RELEVANCY SCORE 60.4

Hi

I am having trouble accessing my home computer that is linked up through the BT home hub. I want to access my home computer through work.

Anyone help me with this specific router (BT home hub)

Thanks in advance
 

A:Remote Desktop through my BT Home Hub

Here is how to forward ports on your specific device -

http://www.portforward.com/english/routers/port_forwarding/BT/BTHub/

the port you need to forward is 3389.

Make sure to assign a static IP to the PC you want to Remote Desktop into.
 

Read other 1 answers
RELEVANCY SCORE 60

Hi,

I am writing because I have recently experienced an issue with my remote desktop. I can connect to my Windows 2003 server using Remote Desktop using its IP address, but not its host name. My desktop is a Windows Vista Ultimate box, and both machines are configured to use a Workgroup instead of a domain. Remote Desktop works great when I connect by IP, but will not even connect when attempting to use hostname.

The reason that this is important is that I am attempting to use Virtual Server on my server, and when starting up a new virtual machine, I do not always know what the IP will be. It would be very handy to be able to RDP using the host name.

Any thoughts or ideas are greatly appreciated.

Thank you for your time,
Everett

A:Remote Desktop + Can't connect using host name

Hi everettcomstock,

The best thing you could do here is to set both the server and PC up in a domain as this makes it easier to manage the DNS. When you are in a workgroup you always get this sort of error problems.

What I would do is setup W2K3 server to be also be a DNS and a DHCP server. The reason you only can use an IP address is down to each node not being registered correctly and the best way is to add each device into the DNS configuration. When you setup the server and put every PC into the domain it will then register each nodes settings in the DNS configuration automatically. Then just set the gateway as your router address for internet access.

It sounds complicated but it isn't

Another cheat and way around this if you are not using a domain is to edit your hostfile on the PC and add in the IP address and hostname, make sure you reboot. This is not best if you are using the several PC's to do the same thing as you would have to put this on each PC.

# Copyright (c) 1993-1999 Microsoft Corp.
#
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
#
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name den... Read more

Read other 4 answers
RELEVANCY SCORE 60

Hello,
I am having an issue where one specific website can't connect when I am on a remote desktop connection. It seems to work fine at first after I reboot the remote computer but eventually I always get the This page can't be displayed message and clearing the
cache or resetting IE doesn't do anything to remedy it. However if I reboot the machine it again works fine for a little while. It also appear to be just this site and over the remote connection when this happens if I am at the computer it works
fine. 
I am on a 64 bit Windows 7 professional machine and running Internet Explorer and I have installed all the latest updates installed.The issue seems specific to Internet Explorer as I can reach the site from Chrome when this happens but I would prefer to
use IE because the way the site is set up in Chrome is a hole different interface and some of the features don't work the same.

Any suggestions on something I might look for or try to sort this out would be greatly appreciated.
Thanks,

Read other answers
RELEVANCY SCORE 60

can you Connect to MAC OSX from Windows XP via Remote Desktop? can you do it ? if so what program looking for mainly freeware or shareware and Vnc shitted up my apple so thats out of the question
 

A:Connect to MAC OSX from Windows XP via Remote Desktop?

Remote Desktop Connection Client for Mac
 

Read other 3 answers
RELEVANCY SCORE 60

Hi. First, thanks for any help you can provide.

I know that RDP can be started from the command line with the mstsc command, and that you can use .rdp files to store the information for the connection.

What I'd like to be able to do is to create a batch file that will prompt for a username and password, and pass that information into the computer it is connecting to. I've got 20+ users that all need to connect to the same group of machines throughout the day, and I can't store their passwords or create .rdp files for each person due to security restrictions.

I'm hoping to write one batch file that will get the users name and password, then connect them to each of the computers using that login information. I haven't been able to find any switches that allow me to pass in a user name and password, nor do I see any method of using a variable in RDP files.

Anyone know if this is possible, and how?

Thanks for any information you can provide!
 

Read other answers
RELEVANCY SCORE 60

Ok here is my dilemma, everything was working great, but then for some unknown reason it just stopped working. Right now I have my Dv6648se laptop connected via wifi, my DV1340us laptop connected via ethernet and a1530n desktop connected via Ethernet through a switch. All through a Linksys WRT54G Router. I am able to connect from my vista laptop to my XP Pro Laptop and I am able to connect my XP MCE Desktop to my XP Pro laptop. But I am unable to connect from either laptop to my desktop, I am also not able to ping the desktop from the laptops, (it says request timeout, or when I type in the name it says Ping request could not find host desktop (which is it's name)). Ive restarted everything, including my router and my switch. The router is set up via DHCP, and all the computers are able to connect to the internet. So basically my problem is I cannot connect to my desktop and it is not seen by my other computers, yet it can connect and see my laptops.

Any help would be greatly appreciated, Thanks

Mike
 

A:Cannot Connect to Windows MCE with Remote Desktop

Read other 16 answers
RELEVANCY SCORE 60

I really tried everything read every guide....
i have a HP probook 4510s laptop
and i'm trying to connect to my desktop computer...
both running genuine win7 ultimate, same version.
both computer are connected to the same wireless router.
i changed the laptop's remote desktop port so i can port forward the remote desktop connection on both computers.
in the control panel i enabled in both computers the remote access and stuff, like in those guides.
both computers are on the same workgroup.
when i type in the local ip address of the desktop, it won't let me connect.
it says that the computer is shut down, or not connected to the network, or that the server doesn't allow remote access.
what can i do?
i tried LogMeIn but it's slow, I want to connect over the home network.
thanks for the help!

A:Can't connect with Remote Desktop Connection

Have you heard of TeamViewer ?

Here is my link

TeamViewer

Read other 4 answers
RELEVANCY SCORE 60

Hi,

I dont think there is away for this, but can you connect to another machine that can still be used, but under a different setting on Windows XP Pro, like you can with Windows Servers?
 

A:Connect to another machine using remote desktop

Read other 12 answers
RELEVANCY SCORE 60

Just recently immigrate to win 7, I used to connect my XP work computer via remote desktop from home, now I cant . The ping command works fine. How can I solve this problem?

Many thanks

A:How can I connect to XP from Win7 via Remote Desktop

How exactly did you RDP to your Xp before? Were you using mstsc?

Read other 9 answers
RELEVANCY SCORE 60

Hello,
My remote desktop, which was operating OK for some time, is now failing to connect.
There is insufficient evidence as to the cause. The error message is not helpful (screen shot).
I could not find any error codes in Event viewer at Application and service logs > Microsoft > Windows >
Remote assistance.
The connection is from a Vista premium laptop to a Windows 10 desktop.
Both computers are on a local network and are in a common Workgroup.
Ping from the remote to the host works.
Access to shared folders on the host from the remote works.
Remote access on the host computer is on.
I tried to connect with the firewall off - failed.
The RDP-Tcp port number in the registry is 3389
Netstat does not show port 3389 as listening. If this is the problem, How do I get it into a "Listening" state?
However, I think it is only needed if I am trying to remote access via the network and not via the local network.
The host pc name is Frankspc the user is Frank
The remote pc name is Charlottespc the user is Charlotte.
Any help to get the connection re-established will be much appreciated.
Frank C

A:Remote desktop fails to connect.

To be clear...

Your screen shot shows you're trying to connect to Frankspc remote Win10 computer.

However, you said:
Client (controlling computer) is "Frankspc" (Vista);
Remote [or server] (computer being controlled) is "Charlottespc" (Win10).

So I assume you meant the client is Charlottespc (Vista) and remote is Frankspc (Win10)?

And all the settings you've checked would be on the Win10 system?
I think Win10 definitely has to be listening on 3389.
So wouldn't this be more of a Win10 question?

Sorry if I've got it backwards.

Read other 5 answers
RELEVANCY SCORE 60

I want to connect to Remote Desktop from one Windows 8.1 to another.

On the 8.1 Machine to be connected remotely to:

Control Panel\System and Security\System\Remote Settings

Remote
Check - Allow Remote Assistance connection to this computer.

Advanced..
Check - Allow this computer to be controlled remotely.

6 Hours
Check - Create Invitations that can only be used from computers running Windows Vista or higher.

Firewall settings?

On the 8.1 computer remotely connected thru:
Remote Desktop Connection
Computer:192.168.0.55
User Name: Computer\User
**did not work**

A:Connect to Remote Desktop from one Windows 8.1 to another

One word "Teamviewer".

Read other 2 answers
RELEVANCY SCORE 60

I'm unable to connect my PDA, using Remote Desktop Mobile , to my Vista PC ( Vista Ultimate - 32 bit ). Note: I'm connected to the internet through a wireless router. Any help would be greatly appreciated. Thanks.

Read other answers
RELEVANCY SCORE 60

Remote Desktop Allowed
Regedit set to 3389
Norton 360 mstsc.exe allowed in traffic rules
ping to workstation replied

just can't get remote desktop to connect? any other things I should check?

A:just can't get remote desktop to connect? anything I should check?

In where you set the port 3389 (what was the number before you changed it?), is fDenyTSConnections set to 0?

Read other 9 answers