Over 1 million tech questions and answers.

BSOD by ntoskrnl.exe, error d1, error 3b, error 1a

Q: BSOD by ntoskrnl.exe, error d1, error 3b, error 1a

I've just install windows 7 home premium 64bit and got 4 times of BSOD.

for the first time error code is 0x0000001a
for the 2nd time error code is 0x0000003b
for the 3rd time error code is 0x0000003b
for the 4th time error code is 0x000000d1

I also attach minidump files and text files that I got from sf dianostic tool.



And another problem is I try to follow the instruction in this thread
How to fix BSOD caused by ntoskrnl.exe and ntkrnlmp.exe
and now I cannot start the normal window, I have to run in safe mode with network.



in the reply #4 that zigzag3413 post

Using Driver Verifier is an iffy proposition.
Most times it'll crash and it'll tell you what the driver is.
But sometimes it'll crash and won't tell you the driver.
Other times it'll crash before you can log in to Windows.
If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise.
Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
NOTE: You can use Low Resource Simulation if you'd like.
From my limited experimentation it makes the BSOD's come faster.
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

If you are using win 8 add these
- Concurrency Stress Test
- DDI compliance checking

Reboot the system and wait for it to crash to the Blue Screen.
Continue to use your system normally, and if you know what causes the crash, do that repeatedly.
The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.
If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.


If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

Thanks to JGriff2 & Usasma.

RELEVANCY SCORE 200
Preferred Solution: BSOD by ntoskrnl.exe, error d1, error 3b, error 1a

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: BSOD by ntoskrnl.exe, error d1, error 3b, error 1a

For now, I do a restore point and be able to run the normal window7.

Read other 1 answers
RELEVANCY SCORE 92

I recently upgrade my computer from Windows 7 Pro 32 bit to Windows 7 Pro 64 bit; so I'm pretty sure my issues are somewhat driver based.

Most of the time the BSOD's happen randomly; though some of the times are when launching games.

I'm a novice at understanding/interpreting the dump files so help is greatly appreciated.

The dmp files are attached! If you need any more info, let me know.

Thanks in advance!

Edit: Ran Windows in SafeMode for about an hour or two. Ran fine without any crashes.

A:Random BSOD, multiple error codes, error ntoskrnl.exe

Still having this problem. I uninstalled adn reinstalled all my drivers. I ran chkdsk (There was a few corruption, but they've been fixed). I ran Seatools - all tests passed. I have no idea what else to try. Any suggestions?

Read other 1 answers
RELEVANCY SCORE 89.2

Hi,

Can I get some help please had 2 bluescreen crashes ran it through Bluescreenview but dont really know where to go form here not a pro at all so any help would be much appreciated.

I have had two crashes so far on my Toshiba Laptop Qosmio

The cause i believe is the ntoskrnl.exe as listed in thread title.
Below is info from Bluescreen reader-

021014-30654-01.dmp 10/02/2014 7:02:52 PM SYSTEM_THREAD_EXCEPTION_NOT_HANDLED 0x1000007e ffffffff`c0000005 fffff800`038bcca7 fffff880`0bb18728 fffff880`0bb17f90 ntoskrnl.exe ntoskrnl.exe+73ca7 NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7600.16695 (win7_gdr.101026-1503) x64 ntoskrnl.exe+73ca7 C:\windows\Minidump\021014-30654-01.dmp 8 15 7600 293,120 10/02/2014 7:04:04 PM

I have tried to upload DMP file but cannot as says invalid file type.

Regards,

James

A:BSOD ntoskrnl.exe error 0x1000007e error

Hello James, and welcome to Seven Forums.

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions, and post back with the needed information. One of our BSOD experts should be by later when able to further help.

Read other 8 answers
RELEVANCY SCORE 84

Hey guys so I've been getting some random BSOD errors every few days or so. I usually leave my computer on when I am at work or sleep and either when I come home or wake up my computer is off. So I turn it on and it says that the computer didn't shut down properly when I start up. I downloaded the BlueScreenView and noticed I've had some BSOD three times within 10 days. One was a PAGE_FAULT_IN_NONPAGED_AREA error which I believe was a RAM problem (i bought new RAM and installed it plus OCed it to 2133, but I believe it was making my system unstable so I reset the speed to default and haven't gotten that error again), but after that I've gotten two IRQL_NOT_LESS_OR_EQUAL errors related to ntoskrnl.exe. I did some research online and from what I read it could be a number of problems. I'm just not sure where to start and could really use some guidance and advice. I uploaded my dmp files for anyone who knows how to look at these.

Thank in advance.

A:Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0)

Welcome to 7F. I'll take a look at your dumps and see if I can get you BSOD free.


One

 NETGEAR NEUTRAL WIRELESS SOLUTION

Your Netgear Neutral Wireless Solution driver has been flagged. It is quite old a could probably do with updating. Check for updates here
Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 1, fffff800034c88ac}

*** WARNING: Unable to verify timestamp for scmndisp.sys
*** ERROR: Module load completed but symbols could not be loaded for scmndisp.sys
Probably caused by : scmndisp.sys ( scmndisp+16d1 )

Followup: MachineOwner
---------

1: kd> lmvm scmndisp
start end module name
fffff880`0188b000 fffff880`01895000 scmndisp T (no symbols)
Loaded symbol image file: scmndisp.sys
Image path: \SystemRoot\system32\DRIVERS\scmndisp.sys
Image name: scmndisp.sys
Timestamp: Fri May 27 11:30:22 2011 (4DDF7D3E)
CheckSum: 00009C0C
ImageSize: 0000A000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Two

 HARDWA... Read more

Read other 9 answers
RELEVANCY SCORE 83.6

i keep getting BSOD when playing game new graphics i dont know where to start when its comes to BSOD stuff

110414-10576-01.dmp 11/4/2014 10:48:39 PM 0x00000124 00000000`00000000 fffffa80`0af318f8 00000000`00000000 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+4a63cc NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7600.16385 (win7_rtm.090713-1255) x64 ntoskrnl.exe+4a63cc C:\Windows\Minidump\110414-10576-01.dmp 6 15 7600 262,144 11/4/2014 10:48:41 PM is some info i dont know what else yall need

A:0x00000124 ntoskrnl.exe ntoskrnl.exe+4a63cc BSOD Error runninganygame

Please Help

Read other 1 answers
RELEVANCY SCORE 78.8

Hi
I am gettting bsod frequently.I have done memtest.memory seem to be working properly.i havent found any error
i am not overclocking
sometimes my usb ports dont work and i am trying to restart the computer but it freezes on the shutting down screen and i do it manually.

here is my DM log

Read other answers
RELEVANCY SCORE 78.8

Have no idea how it happened. Went to sleep yesterday fine, shutdown windows, no problem. Today started and then irql_not_less_or_equal blue screen.

I'm runing now at safe mode.
I don't have any overclock, no changes on memory.

I was unable to use PERFMON, got this error:






Quote:
Error:

An error occured while attempting to generate the report.

The system cannot find the path specified.




I have no idea what it is. Help please?

I'm running Windows 7 Ultimate 64 bits

Btw, what file should I read in the Windows_NT6_BSOD_jcgriff2 folder?

Thank you very much.

A:BSOD out of nowhere, error on ntoskrnl.exe

Couple of issues

1-Related to ctaud2k.sys Creative WDM Audio Device Driver from Creative Technology. Yours from 2009. Update to newest

2-asacpi.sys
Asacpi.sys

The pre 2009 version of this driver is a known BSOD cause.





Quote:
Please visit this link: Asus tek computer inc. -support- drivers and download p7p55d le

ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. - Motherboards- ASUS P5K-VM

Scroll down to the utilities category, then scroll down to the "atk0110 driver for windowsxp/vista/windows 7 32&64-bit" (it's about the 12th item down).

Download and install it.

Go to c:\windows\system32\drivers to check and make sure that the asacpi.sys file is date stamped from 2009 or 2010 (not before).



3-Really old drivers needing updating

Code:
pcouffin.sys 12/5/2006 10:39:30 AM
vbtenum.sys 3/5/2007 8:17:00 AM
BTHidMgr.sys 3/5/2007 8:17:15 AM
BtHidBus.sys 1/21/2008 7:26:31 AM
MtiCtwl.sys 11/4/2008 3:40:50 AM
dne64x.sys 11/10/2008 9:01:24 PM
hamachi.sys 2/19/2009 6:36:41 AM
How To Find Drivers:




Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Man... Read more

Read other 3 answers
RELEVANCY SCORE 78.8

So, right when I got my computer I was bluescreening...a lot! And searched around and found that reinstalling windows 7 might solve this. When i did that, the blue screens became less frequent but packed together. I might go a few days without one yet then 1 day might get 4 within a few hours of each other.

I'm not the most amazing with computers and such, but if you need any specs then please ask and I'll provide!

I also don't know where to go to find my dump files, but supposedly those can help someone find out what's causing the bluescreens? I can try and locate them and upload them if you guys need it! Thanks so much in advance! =3

A:ntoskrnl.exe BSOD Error!

  
Quote: Originally Posted by Excession


So, right when I got my computer I was bluescreening...a lot! And searched around and found that reinstalling windows 7 might solve this. When i did that, the blue screens became less frequent but packed together. I might go a few days without one yet then 1 day might get 4 within a few hours of each other.

I'm not the most amazing with computers and such, but if you need any specs then please ask and I'll provide!

I also don't know where to go to find my dump files, but supposedly those can help someone find out what's causing the bluescreens? I can try and locate them and upload them if you guys need it! Thanks so much in advance! =3


If you wish to have others assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder. The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
* Briefly describe the problem history and circumstances in the same post. Somebody will attend to your query as soon as possible.

Read other 8 answers
RELEVANCY SCORE 78.8

pls help me... i just instaled new windows 7 Ultimate x64 and 1h later BSOD

A:BSOD error ntoskrnl.exe

this is my minidump zip file

Read other 3 answers
RELEVANCY SCORE 78.8

BSOD error ntoskrnl.exe please help!MONDONEXUS-27_09_2015_21_52_04,03.zip

A:BSOD error ntoskrnl.exe please help!

Hi likos,

Welcome to the 8forums.

Seeing you have a windows 10 Pro system, please create a new thread at BSOD Section - Windows 10 Help Forums

Read other 1 answers
RELEVANCY SCORE 78.8

So yeah I've been getting BSODs lately...
I downloaded BlueScreenView to find out more info and saw that it's ntoskrnl.exe that's been causing the problem (it usually shows 0x50 and 0x1a every error)
I've attached the dump files using the debugger and the Diagnostic Tool
I will greatly appreciate your help!

A:ntoskrnl.exe BSOD Error?

No Replies... I'm just gonna lie down now

Read other 7 answers
RELEVANCY SCORE 78.8

Hi, I need help with my Acer laptop. Yesterday, I encountered with a BSOD. Here is the .dmp file I've uploaded. Any help will be appreciated!

A:BSOD error - NTOSKRNL

Did this occur while playing a video or game?
You had a fault in your direct x whatever happened it's related to your display driver more than likely.
According to your sys info you have a nvidia 5 series mobile gpu.
I suggest removing everything you have nvidia display, and physx. I didn't look to see if you have other nvidia system components but this only pertains to the graphics. in programs and features (control panel)
Then reinstall using the newest available driver, located here
NVIDIA DRIVERS 306.23WHQL


Code:
Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::StartPreparation+1d )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffffa800a926428, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffff8800f426149, If non-zero, the instruction address which referenced the bad... Read more

Read other 9 answers
RELEVANCY SCORE 78.8

So I'm having a blue screen problem. I have the program Blue Screen Viewer and it keeps bringing up a ntoskrnl.exe as the problem. Thing is my blue screens are random. I haven't had one in a few weeks where I was having several a day before then. Then it just stopped and all of a sudden started up with a couple in the last 2 days.

If anyone can help that'd be awesome! I attached some minidump files that I've gotten so far in this month.

Also if you need system specs then i can list those.

Thanks in advance!

A:ntoskrnl.exe BSOD Error!

A driver may be trying to modify critical kernel code, I suggest running a full scan of Malwarebytes
Download and run TDSSKiller
Remove any old/incompatible software or hardware devices from your computer

Go to C:\Windows\SysWOW64\drivers and post a screenshot of the files

Code:


*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 109, {a3a039d89b32b9ac, b3b7465eedb08992, fffff800031f337c, 1}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption
CRITICAL_STRUCTURE_CORRUPTION (109)
This bugcheck is generated when the kernel detects that critical kernel code or
data have been corrupted. There are generally three causes for a corruption:
1) A driver has inadvertently or deliberately modified critical kernel code
or data. See http://www.microsoft.com/whdc/driver/kernel/64bitPatching.mspx
2) A developer attempted to set a normal kernel breakpoint using a kernel
debugger that was not attached when the system was booted. Normal breakpoints,
"... Read more

Read other 5 answers
RELEVANCY SCORE 78.8

Hey all,

For about 2 months now ive been getting BSOD. been trying all sorts of fixes and nothing seems to be working.. some advice would be much appreciated!

A:BSOD while doing anything , error ntoskrnl.exe

Some of these dumps look corrupt and one is pointed at your razor mouse driver. From the driver txt file it does appear this driver is pretty old I would check the manufacturer site for a updated driver and see if that resolves your issues.

Read other 1 answers
RELEVANCY SCORE 78

Hello,
I recently bought a computer but I'm having some problems I get the BSOD randomly: surfing on internet, watching movies etc...And it can be 10 mins after boot or 2 hours. And its like 1 minute before the computer crashes internet explorer doesn't reply and google chrome either.

Heres my config

AMD Phenom II X4 955 Black Edition
AMD Radeon HD 6770
Gigabyte GA-870A-UD3
G skill DIMM DDR3 4096 Mo
Seagate Barracuda 7000.12 SATA 3 - 1000 Go
with windows 7 home premium 64 bits

hope you can help

greetings
Ferrageo

oh and sorry for the french health thing

A:BSOD driver ntoskrnl.exe error

Hi ferrageo and welcome to SF!
Virtually every one of your crashes comes with a different error code (some blame a damaged file system, some go more towards defective drivers and/or hardware)
So let's start with this:
Take back any form of overclocking that might have been applied. Easiest way: reboot, go into the BIOS and load safe defaults settings.
Next important point is this:
Learn how to install Windows 7 Service Pack 1 (SP1)
As for your RAM, test it after this tut:
RAM - Test with Memtest86+
Next the file system:
Run a chkdsk /r after this tut:
Disk Check

If the file corruption becomes more frequently still, you should check your harddrive with the appr. program
Seagate

Western Digital

Samsung

Please report back with your findings

-DG

Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\David\Desktop\ferrageo\091711-24913-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16841.amd64fre.win7_gdr.110622-1503
Machine Name:
Kernel base = 0xfffff800`02a1f000 PsLoadedModuleList = 0xfffff800`02c5ce70
Debug session time: Sat Sep 17 07:46:39.754 2011 (GMT-4)
System Uptime: 0 days 0:31:14.128
L... Read more

Read other 1 answers
RELEVANCY SCORE 78

Hi I keep having this error, I have tried many things, different hard drive, memory stick, motherboard, and even tried to upgrade to win 10 to solve this error, but it keeps occurring. I wiped the hard drive using the preinstalled software by hp and still the error routinely happens.
I have used your program and will send the file. I am at wits end.

Read other answers
RELEVANCY SCORE 78

Ok, I posted a while back ago on a similar problem, or possibly the same problem. I hate to repost, or start a new thread, but it seems that this is the way it needs to be done. I thought I fixed it before. Well I didn't...it's back again... I have run and uploaded the SF_Diag Tool for someone to look at. This only seems to happen after a windows update then a Restart....for the most part...

I also ran Who Crashed and this is what it came up with:

On Tue 9/11/2012 7:37:54 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\091112-10483-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x4B09CC)
Bugcheck code: 0x124 (0x0, 0xFFFFFA800CBAC8F8, 0x0, 0x0)
Error: WHEA_UNCORRECTABLE_ERROR
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA).
This is likely to be caused by a hardware problem problem. This problem might be caused by a thermal issue.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.

Thanks in advance!

A:BSOD error (ntoskrnl.exe) at Reboot.

I'm new to BSOD analysis, but have you over clocked any hardware devices at all?

Read other 9 answers
RELEVANCY SCORE 78

Hello,

I am getting BSOD with error Error IRQL_NOT_LESS_EQUAL. When checked with Blue Screen view, I am seeing it is caused by ntoskrnl.exe driver.

All system specs are listed on my profile. Please let me know what you need for further help.

Thanks in advance!!

A:BSOD - Error IRQL_NOT_LESS_EQUAL ntoskrnl.exe

Thank you for filling in your System Specs.

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

Read other 4 answers
RELEVANCY SCORE 78

Hi,

I built my pc about a week ago and I have been getting BSODS, and I used BlueScreenView to see that ntoskrnl.exe, 142760 was causing the issue. I am not sure how to troubleshoot this as this is completely new to me. I checked that my memory and storage are fine. I will be attaching the dmp file below. Please help me, thanks a lot.

A:ntoskrnl.exe 142760 BSOD Error

Originally Posted by akashme2palli


Hi,

I built my pc about a week ago and I have been getting BSODS, and I used BlueScreenView to see that ntoskrnl.exe, 142760 was causing the issue. I am not sure how to troubleshoot this as this is completely new to me. I checked that my memory and storage are fine. I will be attaching the dmp file below. Please help me, thanks a lot.



Have you a Raid setup, is so upgrade drivers....Also check all hardware drivers.
Have you overclocked, if so restore to original clock speed.
I assume you have taken out one memory at a time to check as you state memory fine.

Read other 1 answers
RELEVANCY SCORE 78

Ok guys I am at my wits end. I keep getting a BSOD with the code of:
Stop: 0x0000001E (0xffffffffc0000005, 0xfffff800030a3f00, with Blue screen viewer showing ntoskrnl.exe +c8588 as the error. I have tried to find some information on this error but I can never find +c8588. I have attached the dump file. I have gotten the BSOD while gaming, viewing the web, and even bringing the comp from sleep mode. Would love to get this error fixed.

A:Ntoskrnl.exe +c8588 BSOD error

Just had the error once again while the computer was idle.
Additional information about the problem:
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF80003123AC2
BCP3: FFFFF88009EA0998
BCP4: FFFFF88009EA01F0
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
I still can't put my finger on what is causing this problem. Any advice?

Read other 4 answers
RELEVANCY SCORE 78

Hey, so I recently started to get these BSOD randomly now. Not sure what it could be and tried everything I know, plus some things I researched.

x64
Full Retail - What is the age of system (hardware)? Oldest part would be the HD from 2009, and motherboard 2010
- What is the age of OS installation Fresh Install
I have this happen on old ram, and brand new ram as well. I think the cause is a faulty motherboard.
Reason why is I have two slots that died out on me, so I sent out a request for an RMA,

Thanks,
EDIT here is what bluescren view says
00000000`00000003
fffff800`02e566f0
fffff800`02e566f0
5958504b`00240005
tcpip.sys
tcpip.sys+147430

A:BSOD random Error ntoskrnl.exe

  
Quote: Originally Posted by Tai2323


Hey, so I recently started to get these BSOD randomly now. Not sure what it could be and tried everything I know, plus some things I researched.

x64
Full Retail - What is the age of system (hardware)? Oldest part would be the HD from 2009, and motherboard 2010
- What is the age of OS installation Fresh Install
I have this happen on old ram, and brand new ram as well. I think the cause is a faulty motherboard.
Reason why is I have two slots that died out on me, so I sent out a request for an RMA,

Thanks,
EDIT here is what bluescren view says
00000000`00000003
fffff800`02e566f0
fffff800`02e566f0
5958504b`00240005
tcpip.sys
tcpip.sys+147430




These crashes were caused by memory corruption (probably a driver). Please run these two tests to verify your memory and find which driver is causing the problem.

If you are overclocking anything reset to default before running these tests.
In other words STOP!!!
1-Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a... Read more

Read other 8 answers
RELEVANCY SCORE 78

Here's what I got:

Crash dump directory: C:\Windows\Minidump

Crash dumps are enabled on your computer.

On Thu 7/17/2014 1:49:32 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\071714-23462-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x75BC0)
Bugcheck code: 0xA (0x0, 0x2, 0x1, 0xFFFFF800030DAC3F)
Error: IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Thu 7/17/2014 1:49:32 PM GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: symnets.sys (SYMNETS+0x1E7BB)
Bugcheck code: 0xA (0x0, 0x2, 0x1, 0xFFFFF800030DAC3F)
Error: IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\drivers\N360x64\1501000.012\SYMNETS.SYS
product: Symantec Security Drivers
company: Symantec Corporation
description: Network Security Driver
Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL ... Read more

A:BSOD cause by ntoskrnl.exe error 0x0000000a

It's Norton, every one of your dumps points it out:


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 1, fffff800030dec3f}

*** WARNING: Unable to verify timestamp for SYMNETS.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMNETS.SYS
Probably caused by : NETIO.SYS ( NETIO!WfpExpireEntryLru+17 )

Followup: MachineOwner

Code:
fffff880`035085c8 fffff880`04588900Unable to load image \SystemRoot\system32\DRIVERS\SymIMv.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SymIMv.sys
*** ERROR: Module load completed but symbols could not be loaded for SymIMv.sys
SymIMv+0xc900
Uninstall Norton and install MS Security Essentials and MalwareBytes.



   Note
Make sure you uncheck the 'Enable Free Trial' box when installing.

Read other 7 answers
RELEVANCY SCORE 78

Hello,

Since two weeks, I had been fighting to find any solution to my problem but in vain. So i decided to ask here for some help. I swap RAM, HDD, GPU , PSU but in vain. I think that my CPU may be failing.
I attached 2 minidump to this thread since I just re-install win again.

A:Random BSOD ntoskrnl + hal.dll error

Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Read other 9 answers
RELEVANCY SCORE 78

Just today when I got home from work and turned on my PC, it started freezing. just this morning it was working fine (ive had random restarts before but rarely like maybe once or twice a month.) This problem first started out by just freezing, can't move mouse or anything, holding power button don't work either so have to shut the power switch. It now seems to either BSOD or freeze whenever I boot normally (and sometimes the BSOD doesnt even make a dmp.) I either freeze/BSOD on the welcome screen or after a few min when the desktop comes up. Safe mode works fine though (as I am also in it now to post this,) and I have tried system restore to no avail. I've tried testing my RAM sticks by moving them to different slots and testing one at a time and still same problem persists. One forum mentioned video drivers so i uninstalled mine and still nothing. I went to try windows repair but i get some error message saying the utility doesn't match my version (not sure why as its the same disc I used to install with.) I would normally just re-format and install but a few forums mention that not working so I got a little more worried and am now coming to here to see what you guys think? I read initial post and ran the file collection app and have the zip uploaded. One note though: the system health report would not work, just gave me an error screen (maybe because im in safe mode, but like I said can't leave it or I will freeze.) My basic system specs are below, thanks for taking the tim... Read more

A:BSOD ntoskrnl.exe, error 0x00000124

It does not appear you let the jcgriff2 utility run to completion. It sometimes appears it is not doing anything when it actually is, so do not stop it. Go get a cup of coffee or a meal while you wait.

Analysis:BugCheck 0x124
You have a 0x124 hardware bugcheck. If the system is still under warranty, I would recommend sending it in to have diagnostic tests done and any bad hardware replaced.



   Warning
Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

For your hardware stop 0x124 crash, read through Stop 0x124 - what it means and what to try and use the following hardware checks to supplement that link.
If you are overclocking any hardware, please stop.

If you have an SSD, make sure the following are up to date:SSD firmware
BIOS Version
Chipset Drivers
Hard disk controller drivers/SATA drivers
If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.

Run all but the advanced tests with SeaTools for HDDs.SeaTools for Windows

SeaTools for DOS
Monitor temperatures during the following tests. Use the following programs to monitor the temperatures. Real Temp is a good CPU temperature monito... Read more

Read other 9 answers
RELEVANCY SCORE 78

Hey,

I am getting a BSOD since one week randomly with the message IRQL_NOT_LESS_OR_EQUAL. BlueScreen Viewer showes me, that it is caused by the driver ntoskrnl.exe. Before I got this BSOD I updated my Windows 8.1 to Windows 8.1.1 . Since this time, this error happens randomly!

My system specs are the following:

Laptop: Asus S400 CA
CPU: Intel Core I5 3317 U @ 1,70 GHz
Memory: 8 GB
Graphics: Intel HD Grpahics 4000
Mainbord: Asustek S400 CA
Antivirus: Avast! Internet Security (Version: 140512-0)

Before I got this IRQL_NOT_LESS_OR _EQUAL error I also got the BSOD Driver_Power_State_Failure. I figured out, that it might be the Bluetooth Driver, as buescreenviewer stated the driver causing the error is btfilter.sys.

I attached also a SF Diagnostic Tool File!

I would be glad and happy about some help, since BSOD?s are annoying

Thank you very much

Cheers Fabi

A:BSOD, error IRQL_NOT_LESS_OR_EQUAL, ntoskrnl.exe

Your two latest dumpfiles blames Probably caused by : WinFLAdrv.sys ( WinFLAdrv+34f2 )
This is the driver Related to WinFLAdrv.sys Service Application from NewSoftwares.net and probably related to Folder Lock 6.
Your driver dates from WinFLAdrv fffff800`f398d000 fffff800`f3999000 Mon Nov 14 14:41:13 2011 (4ec11a79) 00010744 None WinFLAdrv.sys
And is probably not windows 8.1. compatible, please update to windows 8.1. compatible driver.
Driver Update Site: Folder Lock - Lock files, Encrypt and Backup - Free Download

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck A, {ffffb0013c220656, 2, 0, fffff800f9045433}
*** WARNING: Unable to verify timestamp for WinFLAdrv.sys
*** ERROR: Module load completed but symbols could not be loaded for WinFLAdrv.sys
Probably caused by : WinFLAdrv.sys ( WinFLAdrv+34f2 )
Followup: MachineOwner
---------
3: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis ... Read more

Read other 5 answers
RELEVANCY SCORE 77.2

Hello, i'm new to this and my computers being having some problems

There seems to be a BSOD problem on my new cpu, its being happening for a while now but i have been ignoring it because of how it only happens when i boot the computer up the first time, it loads, lets me login in and usually after about 5 minutes or so blue screens on me.

i have updated ALL drivers, even going back to the default ones and still having these problems. i've ran all of the tests i could do to try to resolve this with my limited knowlegde of solving these bugs.

i will try to attach the .dmp files and if their not here please tell me how to do so....
also i have Norton V5 and was wondering if i went to security essentials would that help?

CPU: Intel i7 2600k
RAM: 4x 4gb 1333MhZ
PSU: 850watts Generic Brand
Motherboard: Asus Z68 Pro 3 Gen 3
Graphics Card: Asus Twin Frozer GTX 560
HardDrive: Western Digital 1TB

thanks, bryce

A:BSOD error code Help NTOSKRNL.EXE AND NCIP.SYS

here are the .dmp files thanks

Read other 9 answers
RELEVANCY SCORE 77.2

Hi i am new to this, i keep getting blue screen at random and dont know how to debug minidump file and i am running out of patience with this pc thanks in advance and that is the most recent one ive had.

On Thu 18/10/2012 13:23:57 GMT your computer crashed
crash dump file: C:\Windows\Minidump\101812-68344-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x87AE9)
Bugcheck code: 0x24 (0x1904FB, 0xFFFFF880089F3618, 0xFFFFF880089F2E70, 0xFFFFF80002CE444F)
Error: NTFS_FILE_SYSTEM
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates a problem occurred in the NTFS file system.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.

A:BSOD at random times, error ntoskrnl.exe

Welcome

Please upload your msinfo32.nfo file. To get this:
Click on the Start
Type msinfo32 into the Search programs and files box
When it opens, go to File, Save
Save as msinfo32.nfo and save in a place you will remember
Let it finish the process of gathering and saving the system info
Right click the .nfo file, click send to compressed (zipped) folder
Upload the .zip file here.

Post a screen shot with crystal disk info:CrystalDiskInfo - Software - Crystal Dew World
Screenshots and Files - Upload and Post in Seven Forums

Run Disk Check on your hard disk for file system errors and bad sectors on it:Disk Check

Hard drive test both short and long with: SeaTools for Windows

Also the DOS version of:SeaTools for DOS

Read other 9 answers
RELEVANCY SCORE 77.2

Hello on Tuesday and Wednesday of last week my computer BSOD once on each day. For the past week it's been fine until yesterday and Today where it has BSOD multiple times. I wasn't playing any games and the programs I were running were Steam, utorrent 2.2.1 and spotify. I just let my computer sit like like this and it eventually BSOD. I recently updated my intel , nvidia , and ethernet drivers. This has happened more recently over the past month. Any help would be appreciated.

It is consistently a STOP 1e error as the logs will show.

A:BSOD error STOP 1e tcpip.sys and ntoskrnl.exe

bump

Read other 2 answers
RELEVANCY SCORE 77.2

Hi,
I've a problem with an HP all in one pc. The pc is a Hp TouchSmart 7320 EnergStar. The problem is a BSOD error after about half hour the pc is on. I see the minidump and the process that cause the error is ntoskrnl.exe with 0x00000109 error. The hardware configuration of the pc is this :

4 GB di SDRAM DDR3 a 1333 MHz
Realtek RTL8171EH GbE integrata; Minicard HP Wireless NIC 802.11b/g/n
Intel? Core? i3 2120 (3,30 GHz, 3 MB di cache, 2 core)Chipset Intel? H61
Windows? 7 Professional autentico 64
Video card integrated on h61 chipset

I attach the file generated by SF Diagnostic Tool.

I updated the hardware driver with the last that i found on the hp site. I tested to stop the ESET NOD32 verson 5. This test has not had good result. The bsod is always present.

A:BSOD of ntoskrnl.exe process with 0x00000109 error

Such PCs are hard to debug.

Can you upload your MSINFO32.nfo file?
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.

Read other 3 answers
RELEVANCY SCORE 77.2

So basically keep getting random BSODs for a month now and I can't figure out what is causing them.
The error I keep getting are:
SYSTEM_SERVICE_EXCEPTION
PAGE_FAULT_IN_NONPAGED_AREA
KMODE_EXCEPTION_NOT_HANDLED
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
DRIVER_IRQL_NOT_LESS_OR_EQUAL
MEMORY_MANAGEMENT
They seem pretty random but they always point to ntoskrnl.exe as the culprit, tho afaik that happens when the OS has no idea what caused the crash.

What I did so far:

Tested memory with Windows Memory Diagnostic Tool
Tested memory with memtest86 overnight, 6 passes
Swapped the memory modules and inserted them on different slots
Tested system stability with Prime95 Blend for 2h
Tested VGA card with Furmark for 30min
Tested with Windows Driver Verifier
Tested system files with SFC
Tested with CHKDSK
Tested HD with WD Diagnostics
Reinstalled all drivers with latest WHQL versions or BETA
Updated BIOS and reflashed it just in case
Reinstalled Windows
Absolutely every test above ran clean and had no errors whatsoever.

The important thing to mention is that I never got a single BSOD while gaming or running resource intensive applications, it only happens when I'm browsing or the computer is idle.

So anyone has any suggestions of what might cause this or how to fix this? Thank you.

A:BSOD - Several Error Types pointing to ntoskrnl.exe

Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Read other 9 answers
RELEVANCY SCORE 77.2

Hi all, I have had two BSOD so far of the ntoskrnl.exe variety. I have had the HDD tested, driver verified, scanned for viruses and malware, updated all my windows updates, and still here with no idea of whats going on. Please see attached for my Mem dumps. Much appreciated if anyone could help!!

A:BSOD Windows 8.1 ntoskrnl.exe, error PAGE_FAULT_IN_NONPAGE

Bump, please help

Read other 5 answers
RELEVANCY SCORE 77.2

Hello everyone,

Since yesterday, I've started to get BSOD screens frequently. I tried any tool I could find, but it wouldn't do anything. After further searches, I've found using a dmp reading tool that my blue screens were caused by ntoskrnl.exe. Here are the dump files in text:


Code:
==================================================
Dump File : 010811-19219-01.dmp
Crash Time : 08/01/2011 12:59:58 PM
Bug Check String : PAGE_FAULT_IN_NONPAGED_AREA
Bug Check Code : 0x00000050
Parameter 1 : fffff8a0`00579000
Parameter 2 : 00000000`00000000
Parameter 3 : fffff800`02ecb83a
Parameter 4 : 00000000`00000000
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+66580
File Description : NT Kernel & System
Product Name : Microsoft? Windows? Operating System
Company : Microsoft Corporation
File Version : 6.1.7600.20738 (win7_ldr.100618-1621)
Processor : x64
Computer Name :
Full Path : C:\Windows\Minidump\010811-19219-01.dmp
Processors Count : 2
Major Version : 15
Minor Version : 7600
Dump File Size : 269,728
==================================================

==================================================
Dump File : 010811-25911-01.dmp
Crash Time : 08/01/2011 12:39:58 PM
Bug Check String : IRQL_NOT_LESS_OR_EQUAL
Bug Check Code : 0x0000000a
Parameter 1 : 00000000`00000000
Parameter 2 : 00000000`00000002
Parameter 3 : 00000000`0... Read more

A:ntoskrnl.exe causing various BSOD error messages

http://www.sevenforums.com/crashes-d...tructions.html

Read other 3 answers
RELEVANCY SCORE 77.2

Hello,

I built this machine approximatley 5 months ago. I have been getting random BSOD about Once or Twice a Month. I have attached all required files for assistance. Any help would be greatly appreciated. Thank you in advance..

David

A:BSOD Doing almost any task, error ntoskrnl.exe (nt+0x7CC40)

  
Quote: Originally Posted by d4sheriff


Hello,

I built this machine approximatley 5 months ago. I have been getting random BSOD about Once or Twice a Month. I have attached all required files for assistance. Any help would be greatly appreciated. Thank you in advance..

David


A couple of issues

1-SPTD.SYS

Please remove any CD visualization programs such as Daemon Tools and Alcohol 120%.

They use a driver, found in your dmp, called sptd.sys, that is notorious for causing BSODs.

Use this SPTD uninstaller DuplexSecure - Downloads DuplexSecure - FAQ

when you're done you can use this Freeware:

MagicISO Virtual CD/DVD-ROM (MagicDisc) in its place

Using MagicISO to create ISO image files

2-Old drivers needing updating


Code:
btusbflt.sys 8/27/2008 8:12:08 PM
StarPortLite.sys 2/19/2009 12:08:12 PM
ntk_dtv_64.sys 4/20/2009 9:57:48 PM
sptd.sys 4/23/2009 7:09:30 AM
spldr.sys 5/11/2009 11:56:27 AM
LHidFilt.Sys 6/17/2009 11:49:39 AM
LMouFilt.Sys 6/17/2009 11:49:43 AM
How To Find Drivers:




Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device... Read more

Read other 1 answers
RELEVANCY SCORE 77.2

Hi all,
I've been experiencing some BSODs recently and I would greatly appreciate your views on root causes and potential fixes.

For your info: I purchased my system in September 2011 at Digital Storm and started to experience BSODs in November 2011. I reinstalled Windows towards end of 2011 then changed the motherboard in June 2012.

Basis system specs:
- Windows 7 Home Premium 64bit
- OEM
- Hardware from September 2011 except motherboard from June 2012
- OS reinstalled in June 2012 following change of motherboard

Thanks in advance!

A:BSOD - DRIVER_POWER_STATE_FAILURE - error 0x0000009f cause by ntoskrnl

Device Concerns:
Code:
Ethernet Controller PCI\VEN_10EC&DEV_8168&SUBSYS_85051043&REV_09\4&11EB9DBD&0&00E4 The drivers for this device are not installed.
PCI Simple Communications Controller PCI\VEN_8086&DEV_1E3A&SUBSYS_84CA1043&REV_04\3&11583659&0&B0 The drivers for this device are not installed.
Universal Serial Bus (USB) Controller PCI\VEN_1B21&DEV_1042&SUBSYS_84881043&REV_00\4&3927C719&0&00E7 The drivers for this device are not installed.
SM Bus Controller PCI\VEN_8086&DEV_1E22&SUBSYS_84CA1043&REV_04\3&11583659&0&FB The drivers for this device are not installed.
Universal Serial Bus (USB) Controller PCI\VEN_8086&DEV_1E31&SUBSYS_84CA1043&REV_04\3&11583659&0&A0 The drivers for this device are not installed.
Prior to getting help, please install the above drivers from your motherboard support site. If you need help, please fill in your system specs in your profile and not in a post in this thread: System Info - See Your System Specs

Read other 5 answers
RELEVANCY SCORE 77.2

During daily usage of my newly modified PC, I have been receiving multiple BSOD's with the same error. I don't know much about computers, so I can't really seem to locate the issue myself. I have included 2 dmp files and MEMORY.dmp in this archive, and I hope someone might be able to help me.

http://www.mediafire.com/download/e16w7y...p/BSOD....
Virus scan:
https://www.virustotal.com/en/file/5c8d1.../analysis/

Thank you, help would be deeply appreciated
 

Read other answers
RELEVANCY SCORE 77.2

I'm getting this BSOD random every 10-20 hours max,always the same one.
Minidump is attached.

Always the same IRQL_NOT_LESS_OR_EQUAL ntoskrnl.exe

I tried a complete memtest and all is OK
i tried a complete windows 7 64bit reinstall with formatting and still the same BSOD

My configuration :

Intel I7 860
12 gb ram crucial 1600mhz
main hd : crucial m4 ssd 128 gb
secondary hd : WD green 2 tb
gpu : XFX ATI 5850 1 gb ram
motherboard : Asus P7P55D LE Intel P55 Socket 1156 DDR3 1600 2xPci Express Integrated:Lan-Audio RETAIL
monitor : dell U2410

no overclock

I'm without a clue sigh please help

I had this configuration from 1 year now and BSOD started to appear like 1 month ago

I have to say that my crucial m4 ssd is with first firmware...should i update it and retest?

A:BSOD random ntoskrnl.exe error i'm clueless :(

Yes, update your SSD to the latest firmware. There have been known problems with the Crucial M4 without the latest firmware. See http://www.sevenforums.com/crashes-d...ld-boot-3.html

You will also want to update the following driver:
Code:
ASACPI fffff880`05698000 fffff880`056a0000 Sun Mar 27 20:30:36 2005 (42476c4c) 00003c77 ASACPI.sys
There is not an update through your Motherboard support site, but you can update it for a different motherboard since it is just an ASUS utility and not an actual device driver.Older versions of ASACPI.SYS are a known BSOD problem on Windows 7. Update the driver by:Going to the Asus motherboard support site
When you reach the website:
Scroll down the page and click Utilities
Hold Ctrl and press f (ctrl+f) to enter the browser's find feature
Search for "ATK0110 driver for WindowsXP/Vista/Win7 32&64-bit" (without quotes)
Download and install the driver.
After installation is complete, verify that it installed correctly.Click Start Menu
Click My Computer
Go to C:\WIndows\System32\drivers\
Verify that the ASACPI.SYS file is dated 2009 or newer (2010,etc.)
Thanks to JMH and zigzag3143 for the above information.

Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [D:\Kingston\BSODDmpFiles\zirconicus\040412-22167-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http... Read more

Read other 9 answers
RELEVANCY SCORE 77.2

Hello, I have been having this BSOD for about half a year now and I don't know why it is happening. It always happens when I'm gaming, not any other time, it recently happened during Deus Ex and before that a varied amount of times with games like Jagged Alliance 2 and Dark Messiah.

The good thing is that it doesn't happen often, but it definitely is getting annoying.

The thing that frightens me is that it may be a problem with my hardware, as I had reformatted my hard drive about three months ago and even after the reformat I still get BSODs. Now the truly puzzling thing about this is before the reformat, my BSODs, while still being caused by ntoskrnl.exe, were usually 0x24 NTFS_FILE_SYSTEM errors while now they are all 0x0000003b SYSTEM_SERVICE_EXCEPTION errors.

My processor is overclocked to 4.0ghz but it's stable and runs cool, and I don't think it would cause that type of error. My RAM is on default everything, stock voltage, 1600mhz, and manufacturer recommended timings. This BSOD has happened to me while and without my video card being overclocked (which is also stable -- to my knowledge) so this further confuses me on why this would happened.

I really don't understand, I don't see how it could be the software since I've been having BSODs before and after a total reformat. And I don't particularly like the idea of RMAing a component and being without a computer for 2-4 weeks.

Any help is appreciated.

A:ntoskrnl.exe BSOD error 0x0000003b when gaming

Welcome

ntkrnlmp.exe is not the true cause of your crash.
What antivirus are you using?

Please refrain from using 3rd party defrag programs.

Code:
Start Menu\Programs\Ableton\Live 8.2.2 Public:Start Menu\Programs\Ableton\Live 8.2.2 Public
Start Menu\Programs\Auslogics Public:Start Menu\Programs\Auslogics Public
Start Menu\Programs\Auslogics\Disk Defrag Public:Start Menu\Programs\Auslogics\Disk Defrag Public
Uninstall using revo uninstaller, use the inbuilt defrag program of windows 7. Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems
Disk Defragmenter - Open and Use

You should get the latest version of your graphic card drivers installed.

Code:
Driver c:\windows\system32\drivers\atikmpag.sys (8.14.1.6268, 360.00 KB (368,640 bytes), 7/27/2012 9:14 PM)
Click on the Start ► Control Panel ► Programs ► Uninstall a program ► Uninstall the ATI related stuff. Delete remnants of its driver using Driver Sweeper


Code:
STOP 0x0000003B: SYSTEM_SERVICE_EXCEPTION
Usual causes: System service, Device driver, graphics driver, ?memory
BugCheck 3B, {c000001d, fffff80002ecc3d6, fffff8800ab559b0, 0}
Probably caused by : ntkrnlmp.exe ( nt!ExpReleaseResourceForThreadLite+46 )
For bug check 24,
Code:
STOP 0x00000024: NTFS_FILE_SYSTEM
Usual causes: Disk corruption, insufficient physical memory, Device driver, Indexing, Resident antivirus, backup, defrag progr... Read more

Read other 1 answers
RELEVANCY SCORE 77.2

I've had BSOD errors ever since I put this machine together. Dmp files are beyond my knowledge base, but the deeper I delve, the more this seems like the only way to fix this. My computer crashes for no apparent reason. Sometimes it will work fine for months. Other times I get this dreaded PFN_LIST_CORRUPT. I recently updated my graphics card and installed a new hard drive. I updated the drivers with clean installs, but I had the same error message with my old hardware. Please help, folks. I'd greatly appreciate it.

A:BSOD, error 0x04e, PFN_LIST_CORRUPT, ntoskrnl.exe

Hi.

Test your RAM modules for possible errors. How to Test and Diagnose RAM Issues with Memtest86+
Run memtest86+ for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

It it does not show any error, enable Driver Verifier to monitor the drivers. Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any.
_______________________________________

Code:
B... Read more

Read other 7 answers
RELEVANCY SCORE 77.2

ASH-21_05_2016__33016_37.zip

Hello, I've been receiving BSODs and my system keeps freezing randomly, especially when being physically moved from its original position to a fresh position. I've tried conducting general hardware tests, but everything seems to be working just fine, atleast superficially. The manufacturer's hardware tests and chkdsk didn't reveal any issues.
The system details are as follows
Dell Inspiron 15 3521
3rd Generation Intel Core i5-3 337U processor (3M Cache, up to 2.7 GHz)
500GB 5400 RPM Hard Drive

I've attached the required zip file as well.

Any help/advice regarding what I should do to fix this would be greatly appreciated.

Thank you!

Read other answers
RELEVANCY SCORE 77.2
A:page_fault_in_nonpaged_are bsod error ntoskrnl.exe+748c0

Blue Screen of Death (BSOD) Posting Instructions
Asking to move this to the appropriate section.

Read other 1 answers
RELEVANCY SCORE 77.2

Hi, i encountered several BSOD recently, most of the times it happen when im downloading file using Internet Download Manager. I already tried re-installing IDM but no luck.

Error code: 0x03b
Driver: ntoskrnl.exe
Please see attached file for further details

My Operating System is Windows 7 Home Premium x64
Sony Vaio Laptop VPCEE42FX
4GB RAM

Thanks!

A:Random BSOD, error 0x03b ntoskrnl.exe

Crashes point to Kaspersky, Norton Backup, and/or ShadowDefender. Start removing these programs one by one and determine which is causing the crashes.

Removal tool for Kaspersky Lab products will help with removing Kaspersky.
If you remove Kaspersky, I recommend either of these:Microsoft Security Essentials - Free Antivirus for Windows coupled with Malwarebytes. Do not start the free trial of Malwarebytes. Just use the standalone version, update it, and scan your computer once a week with Malwarebytes and with Microsoft Security Essentials.

Good and Free system security combination.

Read other 5 answers
RELEVANCY SCORE 77.2

I've had 2 BSODs within 20 minutes of eachother so I decided to fix this right away, the error is

SYSTEM_SERVICE_EXCEPTION
0x0000003b
ntoskrnl.exe+70600

If there is any additional info i need to post I'll try to get it I've neve rhad one of these, im currently running in safe mode though
Windows 7:
- x64
- Original OS
- OEM
- nearly a year
- nearly a year

A:BSOD(ntoskrnl.exe+70600) error 0x0000003b

> We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.




> The following actions might prevent an error like this from happening again:

* Download and install updates and device drivers for your computer from Windows Update.

* Scan ... Read more

Read other 3 answers
RELEVANCY SCORE 77.2

Hi all


So I have this issue in windows 10 where the keyboard of my laptop stops responding at random instances . None of the keys work. That is soon followed by BSOD and a " Driver Power state failure error message". When forcing the computer to restart by pressing the power button resolves the issue . But the keyboard still stops at random intervals. I have already check all the drivers and they are up to date and there are no yellow explanation marks in device manager and updated
i have run Blue screen viewer and attached the log from that . In all instances it appears the guilty party is " ntoskrnl.exe" but i cannot find any other info on how to resolve this . Can anyone please help?

edit: also added the dump files as zip

Read other answers
RELEVANCY SCORE 77.2

So I've been done a lot of testing on my own, then finally went through about a dozen similar topics and I just can't figure out what's wrong on my own. First, my system specs:

Windows Ultimate x64
i7 920
Asus P6T mobo
12GB RAM ( two 3x2gb tri channels )
300GB velociraptor, 500GB week old slave
ATi 4890 HD

*Nothing OCed, all about 1-2 years old*


For my tests, I've run 3 separate memtests, 3 separate disk checks (on all disks) and had nothing but successful runs.

I tried unplugging all but the one HD I was using, I reformatted/reinstalled - BSOD. I took out one of my sets of tri channel RAM, reinstalled - BSOD. Same with the other set.

I ran burn in and stress tests on my CPU, and then on my GPU and those went fine for 2 hours.

I had ubuntu on another separate HD and it would crash every now and then, but not as frequently as Windows.

There was one topic that had the user having problems turn off their windows update, and another one where you disable ATK 0110 driver given by the Asus P6T mobo. I've done both of those and it still fails.

I also flashed my mobo's bios to the latest as provided by their support website, but no changes we're noticed.

So I'm completely out of ideas and really looking for some help. I really want this PC working by May so I can play D3.

A:BSOD error Stop 0xa - IRQL_NOT_LESS_OR_EQUAL ntoskrnl.exe

Problem Devices:
Code:
Not Available ACPI\ATK0110\1010110 The drivers for this device are not installed.
Older versions of ASACPI.SYS are a known BSOD problem on Windows 7. Install a newer driver by:Going to the Asus motherboard support site
When you reach the website:
Scroll down the page and click Utilities
Hold Ctrl and press f (ctrl+f) to enter the browser's find feature
Search for "ATK0110 driver for WindowsXP/Vista/Win7 32&64-bit" (without quotes)
Download and install the driver.
After installation is complete, verify that it installed correctly.Click Start Menu
Click My Computer
Go to C:\WIndows\System32\drivers\
Verify that the ASACPI.SYS file is dated 2009 or newer (2010,etc.)

Security Software: ??? Recommend either of these two:Microsoft Security Essentials - Free Antivirus for Windows

Good and Free system security combination.
Update the Security Software and run a full scan for viruses/malware.
Download and install all Windows Updates.

Code:
Loading Dump File [D:\Kingston\BSODDmpFiles\Outc4sted\Windows_NT6_BSOD_jcgriff2\041412-18345-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02c53000 PsLoadedModuleList... Read more

Read other 1 answers
RELEVANCY SCORE 77.2

Hi,
BSOD more or less once a day.
the error is
BSOD error 0x0000000a - ntoskrnl.exe+f20c4
Attached here all the error information.
What can cause it / how to find the bad driver of hardware?
Thanks a lot in advance,
Satlos

A:BSOD error 0x0000000a - ntoskrnl.exe+f20c4

Hi satlos.

The BSOD is caused by Edimax nLite Wireless USB Adapter.
(c:\windows\system32\drivers\netr28ux.sys).

Code:
BugCheck A, {fffff6fb41640160, 2, 0, fffff8000346f5d1}

*** WARNING: Unable to verify timestamp for netr28ux.sys
*** ERROR: Module load completed but symbols could not be loaded for netr28ux.sys
Probably caused by : netr28ux.sys ( netr28ux+ab74 )

Followup: MachineOwner
---------
And the driver is old enough.

Code:
fffff880`08a67000 fffff880`08b5b000 netr28ux T (no symbols)
Loaded symbol image file: netr28ux.sys
Image path: \SystemRoot\system32\DRIVERS\netr28ux.sys
Image name: netr28ux.sys
Timestamp: Mon May 25 10:08:17 2009 (4A1A20B9)
CheckSum: 000EE46C
ImageSize: 000F4000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
There are four nLite downloads available in ::: EDIMAX Technology :::.
Attachment 296559
Try to get it according to the device number.

If, the information is needed in any case, the driver is actually developed by Ralink/MediaTek, it is addressed as RT2870 USB Extensible Wireless LAN Card Driver. So, you may get the first one as per the list by them, MediaTek - Downloads Windows too.

Let us know the results.

Read other 1 answers
RELEVANCY SCORE 77.2

This has been going on for a while now. I replaced my motherboard and a bad hard drive. I run off an SSD (samsung 830) as my boot drive with a 1 TB hard drive for storage. I ran memtest multiple times with no errors. Could this be a failing PSU?

The debug info in WhoCrashed said this was not a hardware issue but most likely a driver. I uninstalled all the audio drivers except the one I used just in case. I reverted all my overclocking for the CPU and ram back to default.

Thanks if you can help

A:BSOD while gaming ntoskrnl.exe error 0x000000f4

Welcome

Your BSODs don't give a probable cause.

I've seen Daemon tools installed in your computer which is a known cause for BSODs

Please uninstall it and run driver verifier.

Lets enable driver verifier to rule out buggy drivers
Driver Verifier - Enable and Disable

Information
Driver Verifier runs in the background, "testing" drivers for bugs. If it finds one, a Blue Screen of Death (BSOD) will result; the corresponding dump file will hopefully show the faulty driver.









  
Quote: Originally Posted by Capt.Jack Sparrow


Driver Verifier monitors kernel-mode drivers and graphics drivers to detect illegal function calls or actions that might corrupt the system. It can subject the drivers to a variety of stresses and tests to find improper behavior.

Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.


You also have some disabled devices.

Click on the Start
Expand all items
Look for a
Install all the missing ones

Post back

Read other 9 answers