Over 1 million tech questions and answers.

Can't control fan speed on M58 7360.

Q: Can't control fan speed on M58 7360.

Bought used M58-7360. Fan never speeds up. Stays around 25% I'd guess. I was transcoding video in plex and cpu usage was at 100% and cpu temp was at 170 degrees F and rising. I pulled a wire attached to the "thermal" pin on the front of the mobo to get fan to speed up and cooled the cpu down. After researching, apparently the only way to control the fan speed is the "quiet technology" setting under the ME selection in the Intel AMT software that you access by pressing ctrl+p at boot. I got to the area where it should be listed and it isn't there. It isn't in the normal bios. I installed speedfan program but it doesn't "see" the fan. I've also tried resetting cmos. Please help!

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Can't control fan speed on M58 7360.

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 47.2

when booting and  use radeon r7 260x  only loanding windows 10 home 64 bit  and after  i got black screen usb keyboard freez stuck no can fix        

























WP_20160901_005.jpg ?469 KB

Read other answers
RELEVANCY SCORE 47.2

Hi Folks,
I am having a problem w/ my 7360. When I power up I get no beep and no video. I replaced the bat. and nothing...this appears to be my system board is shot...Any suggestions? I do not really have any money so would like to try and troublshoot this problem....Any help is greatly appreciated..Bri
 

A:Compaq 7360

No beep = no POST, therefore no video

Is there any sign of life at power on (e.g. the lights come on, which ones etc)
Do the fans run?
 

Read other 3 answers
RELEVANCY SCORE 46.8

I have a problem with my all in one printer Brother MFC-7360. Print is working well but when i try scan used scan button on printer which just display connect to pc and hang on. i try using cc4 software to scan is working. Then i can use scan button on printer but just couple day later, my printer is not scan when i use a scan button, i need to use cc4 software to scan. How to fix this problem

A:Printer Borther MFC-7360

Hello and welcome neituach mate I am having some difficulty in picking out what you are saying but am assuming you are using some software other than the Brother stuff ? cc4?? to scan ? documents pictures?

I am just curious as to why you are using addon software when the machines own software should do what you want to do.

Some system specs would be appreciated too mate.
System Info - See Your System Specs

Read other 5 answers
RELEVANCY SCORE 46.8

I have a Compaq Presario, Authentic AMD K-6 3D Processor.
In order to run DirectX 8.1 for my 5 year old to play his new TONKA games, I need to upgrade the video card. I have looked on the TRIDENT website (with no success) and was wondering if anyone has a newer version than I have. This is what I have:

Trident Blade 3D/MVP4 (63)
Trident Microsystems
Chip type: Blade 3D/MVP4
main driver trid_p3d.drv
v. 4.12.01.2214
Mini VDD: trident.vxd
VDD: *vdd, *vflatd
 

A:Compaq Presario 7360

Read other 6 answers
RELEVANCY SCORE 46

Hi!

So my HTC just got stolen so I had to dig up my old spare phone, it's a old Nokia 7360 and it works...somehow...I can call and I can txt but I can't save any new contacts, it just says something like "forbidden action"...anyhow, I can't copy old contacts from the phone to the sim card, I can't delete old contacts...so I was going to reset the whole thing but I have changed the security code (by default it should be 12345) and I can't remember what I have changed it to (and yes, I have tried all the possibilities that there are). So what to do? -any ideas?

P.S. It also says that the memory is full and it can't save any MMS/WAP/ what nat settings...
EDIT

Have got it connected to the computer now (with a data cable and using Nokia PC Suite) and I made a backup of everything (just in case) but it failed to backup the contacts...so I tried to just open and view all the saved contacts but it just fails. Anyhow, I'm not really interested in the old contacts so I don't mind but when it fails to read the contacts it also fails when I try to add new contacts (via the computer).
Next step was to download Nokia Software Updater (that's also what the PC Suite suggested) but it can't "find" the phone when it's connected...

So what next..? -I could send it to Nokia so that they there would flash it but then if there is some other problems with it it would cost a fortune and it's not worth it.
&nb... Read more

A:Problems with old spare Nokia 7360

You need to go in the nearest nokia care point at your place. You can also go to unauthorised repair shop for reformatting or reflashing.
 

Read other 2 answers
RELEVANCY SCORE 46

I am running Windows Vista 64bit, I installed a new printer (brother all in one 7360N). This is a great printer, but Vista will not allow me to set as default and therefore not allowed to print certain things(email, adobe). I have talked with Brother customer service, and we have installed/reinstalled all drivers and have done as much as I can with the printer. I do know now that this is a Vista issue, not the printer/driver issue. If anyone can help me I would appreciate it. At this point I am about to throw this computer against the wall. BTW it DOES do test prints, and also will print if it will allow a drop down and select printer. Thanks in advance!

Shane

A:Vista Won't allow new Brother 7360 to be set as default ....HELP Please

It would be helpful if you filled out the system specs in detail. Does your Vista have a Service Pack? If so which one? Vista before SP1 had problems with printer assignment. For example connecting to a network printer required the old trick of creating a virtual port, such as LPT1, and assigning the printer to it.

Read other 10 answers
RELEVANCY SCORE 45.6

Hello. First post.

Im having trouble installing Windows XP Pro on my Compaq Presario 7360 desktop PC. It will load all the setup files and hang at the "Setup is starting Windows" screen.

I have tried some things with the BIOS, like enabling Hard Disk translation and setting a new IRQ to the USB ports. The Compaq BIOS on the 7360 isn't too great, as it has very few options and no way to disable USB and the like.

The specs are an AMD K62 500mhz processor, 184MB RAM, 160GB Hard Disk (it recognizes all, if not most, of it as formatting to FAT32 took over 2 hours), Trident CyberBlade integrated graphics, network card (forgot the model) and TV card. I think the network card and TV card aren't the culprits though.

I also tried selecting a different HAL at startup, notably "Standard PC with C-Step i486" and ACPI.

Any ideas on how to get past the "Setup is starting Windows" hang?

A:Windows XP setup hangs on Presario 7360

Quote:




s formatting to FAT32 took over 2 hours),




I would consider that a problem, go to the hardrive manufactures website and get their free tools to check the drive. Maybe this is normal though, considering the 500 mhz cpu. I once loaded XP on a 455mhz machine with 64mb of ram just to see if it would work and it did, slow of course, but it did work, I don't remember the format going that slow but it was only a 80 gig drive.

I would also remove all unnecessary cards till after the install is complete

Read other 4 answers
RELEVANCY SCORE 45.6

I hope someone here can help me out - I've searched the net for a few
days to no avail. I have a Presario 7360 that I bought a new video
card for (Radeon 7000 PCI 64MB) along with a TV Wonder Pro tuner card.
I am having trouble with the new video card however; when I install
the card and plug the monitor into it, the monitor will come on but
the computer will not boot. In fact, it will hang before the red
Compaq logo appears on the screen, the little green "disk activity"
light will come on and stay on for a few seconds, then go off. It
doesn't flicker and the machine does not appear to even POST. (I have
tried the card in all four PCI slots, same result with all)

If I power down, remove the card, plug the monitor back into the
onboard VGA port and power on, everything will work fine and when
Windows loads, it finds the onboard VGA and tries to install the
drivers (since I removed them before I installed the card).

The TV Wonder Pro will install without a hitch so I think the problem
with the Radeon 7000 has to be just an issue of disabling the onboard
VGA - however, removing the adapter from Device Manager doesn't do the
trick and I cannot find anywhere in the BIOS to disable it. There is
a place to swap IRQ ports for the Onboard VGA Adapter, but no option
to disable. Is there a place on the motherboard to disable it with
jumpers? Any other ideas? How the blankety-blank can I disable the
onboard VGA? Compaq's manual and website both claim that... Read more

A:Solved: Presario 7360 Onboard Video

I have had similar problems trying to get a (Hewlett Packard) PC to accept a PCI graphics card.

It just failed to boot, despite the makers web page asserting that all would be well.

Seems that some PCI cards and PC's do not play together.
 

Read other 3 answers
RELEVANCY SCORE 45.6

I'm trying to upgrade the memory on a presario 7360, but the memory cards are blocked by the hard drive and the cd rom. The question is how do I remove the screws from the other side of the hard drive and cd rom to move them out of the way so that I can remove the memory cards. Thanks
 

A:Upgrading memory on compaq presario 7360

I am not familiar with the innards of one of these but it is common to have the drives on a subframe which comes out as 1 piece.
 

Read other 3 answers
RELEVANCY SCORE 45.6

it make so much noise
i use speedfan but i dn't how to use
 

A:fan speed control

Hi akash2happy,

Welcome to TSG!

Read the Wikipedia webpage: SpeedFan.

At the end is a link for: How to use SpeedFan to monitor temperatures.

-- Tom
 

Read other 3 answers
RELEVANCY SCORE 45.6

This is an area where HP kinda pisses me off

they hide/disable a bunch of settngs in the BIOS settings, such as fan speed and WoL.

Does anyone know how i can monitor/control fan speeds?
i have tried sppedfan, but it doesn't seem to do anything but monitor my CPU temp. I can set a desired temp for my CPU, but that doesn't the actual temp or the fan speed. When i look into the tab that has fans in it, theres nothing there. I have also tried nTune, as i have an Nvidia GeForce 8400 GS video adapter.

Is there a program other than the two i tried to control fan speed? or a way to manually do it?

A:Fan speed control?

anyone?

Read other 1 answers
RELEVANCY SCORE 45.6

The faugni application won't run due to driver signing. I've tried speed fan to no avail. My Dell 1750 Windows 7 Professional keeps turning off because of overheating. I can't afford to get a mat right now, but I was wondering if there is any program that I can use to keep the fan running enough to lower the temps that are causing the problem.

Any assistance would be greatly appreciated.

Read other answers
RELEVANCY SCORE 45.6

Hey, I need some way to control my Gateway laptop's fan. If I don't, I think my thighs will be on fire. I do not want to overclack and I do not have the money and time to by a cooling pad. Can you help with any fan control programs and/or way to make the fan run faster?

Thanks.

 

A:Fan Speed Control

Read other 8 answers
RELEVANCY SCORE 45.6

i got da program speedfan 4.32 and i cant control my fan speeds it doesnt even show my fans rpm..
 

A:why cant i control fan speed

It depends on what motherboard you have, that will allow Speedfan to work properly. The fans that can be controlled must have 3-wires. You can always install a fan controller, if you really need to control fan speed
 

Read other 2 answers
RELEVANCY SCORE 45.6

I have a HP Pavilion dv6-2088dx

Here's the link to the specs: http://h20000.www2.hp.com/bizsuppor...c=us&objectID=c01920676&jumpid=reg_R1002_USEN

I play games on my laptop like Counter Strike: Source and CrossFire and World of Warcraft and when I play them games, my laptop gets really hot. I know the heat is coming from my graphics/video card and my processor but is there any way I can control/change my fan speed?

Also my laptop is very well ventilated!

Please help me!

Thanks,
MasterCookiez
Nick
 

A:Can I control my fan speed?

The fan's speed (in most cases) is decided on how hot the processor is, or how much power is in use. I don't think it's possible to control it.
 

Read other 1 answers
RELEVANCY SCORE 45.6

Hello all,i recently bought a new PSU and so far it seems to do the job quite well,however when i run certain more demanding games like The Witcher 3 and the PSU itself goes into high load,the fan makes quite a lot of noise.

Most reviews i saw online about the PSU seem to say it's not loud at all,and granted it's not loud while in idle.The question is, is it possible to somewhow lower the PSU fan speed ? The sound it makes is similar to a cheap office fan,however as i said,while in idle it's dead silent.

PSU : seasonic M12II-620 EVO Edition

PC specs :

- FX 8350
- G1 Gigabyte 1070
- 1 x HDD
- 990xa-ud3 MB
- 16 gb ram hyperx savage
- 4 x case fans
 

A:PSU Fan Speed control ?

It should not make the excessive noise you describe
Indeed even with the fan running it should be very quiet as it is a fluid type fan bearing, far quieter than a simple sleeve bearing as found on cheaper PSU`s or indeed quieter than a standard ball bearing

Are you sure you have it mounted correctly
http://seasonic.com/position-power-supply/

I will check the base requirements of your system on the info I have and post back. If you have bought the minimum PSU wattage then you should not have done so
For instance minimum system requirements 600 watt always buy next up eg 700/750 watt

Although the PSU meets the based requirements of the system 125watt CPU and 150 watt graphics, the recommended psu for the card being 500 watt that of course does not take account of other components - hard drives etc OR indeed OC

See this
Seasonic recommend it for office use and causal gaming
https://seasonic.com/product-category/consumer-products/m12ii-evo-series/
use lower left pane for selecting heavy gaming
 

Read other 1 answers
RELEVANCY SCORE 45.6

Has anyone else noticed that the GPU fan speed control is not functioning with Vista 64 and the Radeon 3870x2? I am running Riva tuner to make the fan operate manually but I once had the option with Vista 64 and not flashing the card either.

A:Fan speed control

Tried using the fan control option in the Catalyst Control Center?

Read other 12 answers
RELEVANCY SCORE 45.6

Vista 64bit Dell Inspiron 530 Looking for a program like speed fan, but will work for my dell? Anything else out there>??
 

A:Looking for fan control speed...

If Speedfan doesn't work, then most propably any else program won't work either. You could want to replace the fan with a controllable one or get a voltage regulator for the fan or for all the fans in one.
 

Read other 1 answers
RELEVANCY SCORE 45.2

what need setting bioshow can  Flash BIOS iso usb pendrive for ThinkCentre M58 M58p

Read other answers
RELEVANCY SCORE 45.2

Hey all, I have recently discovered the floppy disk on my presario 7360. It had been working fine, I have been saving music projects onto disk so as not to take up too much memory in the hard disk. Yesterday I was attempting to download some old games off of the internet ( remember the commodore 64? I have some nostalgia issues) I was trying to save them to disk, I was getting the Not Signed message, Could not Verify file. I gave up, it was no great loss but later when I tried to pull some information of another floppy disk using a multitrack recording program everything would freeze up for a minute or 2, then tell me that Drive A is not accessible , it is not ready. I tested the floppy disk and the computer tells me it is 100% fine. I cannot access any information or program on any disk. Some of this info is kind of important, at least to me. I don't want to do a full reboot because there is stuff on the hard drive I don't want to lose and unfortunately now I can't save it to disk. This is truly a mystery, an enigma. If anyone can help me in any way I will be in your debt. My only remaining option is the hammer! Thanx if anyone can help. JR
 

A:Floppy drive problems/ Compaq pressario 7360 Help!

Do you have a floppy disk with some software - perhaps a mouse driver or something small - with which you can test the hardware?
 

Read other 2 answers
RELEVANCY SCORE 45.2

i have an HP pavalon DV9700 and it overheats quick

iv been following this but now i am stuck at editing the .aml

control fan speed with registry hack

i cant figure out where my fan speed value is

.asl file attached to help me find it.

A:Control Fan speed with registry help

I don't think its possible, although I have no experience in overclocking, one of the comments on that tutorial is:






SpeedFan was made with desktops in mind. Notebooks control the fans differently compared to desktops. It will not work.



Is your laptop in a well ventilated place? Have you considered getting a cooling mat? Is the fan nice and clean? That last one is very important, my laptop was reaching 89 celsius before I removed the crap from the fan, now it reaches 58

Tom

Read other 2 answers
RELEVANCY SCORE 45.2

Hello all.

I have 3 computers on the same network connecting through a router, first is mine, second and third are my brothers. The problem is my brother is constantly downloading music albums, movies etc, Which causes mine to "lag" i can barley doing anything takes upto 2 minutes sometimes to load a website.
Is there anything i can do to minimize the issue? such as share the internet speed into 3? so when hes downloading he is using his "portion" of speed?

We are all connected through a wireless router if that helps

Thanks in advance
Liam
 

Read other answers
RELEVANCY SCORE 45.2

is that possible to control the upload speed (the bandwidth,k/s) through XP? if not, does anybody know where can I find a free software to do so?
 

A:control upload speed

Can you explain a bit more, what you want to accomplish?

Do you want to limit the speed to a lower level than the maximum achievable by your connection? What type of connection do you have?

There is nothing easily accomplished within XP, but if your exact needs are known, there are likely some utilities available
 

Read other 2 answers
RELEVANCY SCORE 45.2

i have an HP pavalon DV9700 and it overheats quick

iv been following this but now i am stuck at editing the .aml

control fan speed with registry hack

i cant figure out where my fan speed value is

.asl file attached to help me find it.

A:Control Fan speed with registry help

I don't think its possible, although I have no experience in overclocking, one of the comments on that tutorial is:






SpeedFan was made with desktops in mind. Notebooks control the fans differently compared to desktops. It will not work.



Is your laptop in a well ventilated place? Have you considered getting a cooling mat? Is the fan nice and clean? That last one is very important, my laptop was reaching 89 celsius before I removed the crap from the fan, now it reaches 58

Tom

Read other 2 answers
RELEVANCY SCORE 45.2

1) lately noticing pc very slow. trying to type something takes forever whelther on internet or not.15min. goes by before see 1 letter on screen.
2)also, i can open control panel and but i can't open anything inside. Things like "Add/remove programs", "Display" etc... things inside control panel will open when clicked on but close right away. can't get them to open and stay open.
3)can't empty trash or cookies
4) i have Mcafee virus scan , i try to scan for virus, but it stops in middle and kicks me off. Try to re-download, but that to stops and kicks me off.

could i have spyware or virus? or both/

should i reformat harddrive? and reinstall eveything? I'd rather not if i don't have to.
 

A:speed and control panel

Read other 6 answers
RELEVANCY SCORE 45.2

Hello, what software can I use to manually control the fan speed on my gtx 295 video card? I think I am having heat issues.
Thanks
Eric

A:software to control fan speed gtx 295

Either of these,

MSI Afterburner

EVGA | EVGA Precision | EVGA Precision

should work. Or you can try RivaTuner,

RivaTuner v2.24c download from Guru3D.com

which the other two are based on. RT may not work as it hasn't been updated in a while, and may have problems it you are using an unsupported driver.

Read other 9 answers
RELEVANCY SCORE 45.2

I've got 8.1 on a Dell Inspirion 5738 laptop, I have a generic usb mouse attached. My problem is the mouse pointer slowly starts speeding up until it gets so fast I have no accuracy. I mean I move my pinky and the cursor moves from one side of the 17" screen to the other. I go in Control Panel>Mouse>Pointer Options> and set the speed to a slower speed. At this point I only have one more notch to go down, and it's still a little faster than I want it. How do I control the speed, you know, how do I keep it from speeding up? Is there a way to keep it a set speed other than the above mentioned procedure?

Read other answers
RELEVANCY SCORE 45.2

can anybody explain to me how could I control the upload speed in my XP home edition?any help will be apreciated.
 

A:control upload speed

Read other 6 answers
RELEVANCY SCORE 45.2

I want to turn my fan on high for my high performance or balance setting because my laptop puts out a lot of heat sometimes even reaching a tjmax of 221 F or I believe its 105 C. I just got it and I am a heavy mmo gamer which doesn't weigh as much as a FPS so I figured it could handle it. Which it does pulling 100+ frames in FPS and MMOs. My problem is the overheating and last I checked 180F-190F is pretty hot for a laptop, but my fan won't turn on high cause of the stupid acer CPU %over desire = %+ of its speed which is retarded. I was wondering if anyone knows a program that will bypass the acers third party prevention system so I can turn on the speed to max.

My computer:
Acer Aspire 7741g-6426
intel i5-480m(2.66mhz[turbo 2.93mhz])
AMD Radeon HD 6550M 1g ram dedicated video card
4gb DDR3 memory
 

A:Laptop fan speed control

Read other 8 answers
RELEVANCY SCORE 45.2

 Hi, While using my laptop normally it usually crashes due to overheating. I've noticed this is occuring due to my fanspeed not going up when the temperature of my laptop is going up. Therefor after a while it just overheats and crashes.However after crashed if I try to reboot it still notices the laptop is too warm and therefor it turn on the fans to full speed and refuses to boot. So for some reason during windows it can't control the fan speed but during booting it can.I've tried downloading programs like Fanspeed but they all can't seem to find or control my fan.How do I fix this? Best regards and thanks for reading this, Niek

A:Fan speed control malfunction

MAde an error, using windows 7 64bit

Read other 1 answers
RELEVANCY SCORE 45.2

hi , in a few days time i will getting an ati card. it is been awhile since i used an ati card. So my question is , can i adjust the fan speed of the ati card ? Like before i can use rivatuner to set the nvidia card. So do i adjust from CCC or some other software ?

Thanks.

A:fan speed control for ati card

You can use the CCC directly.

Read other 9 answers
RELEVANCY SCORE 45.2

Hello guys I have this problem with my internet. My internet speed is really low and when I'm playing game (path of exile) my ping is so high and It's really annoying. I have a PC connected to a DSL wifi router and my sister and mother are using their laptop most of the time and they just hog the internet speed with youtube and facebook. Can I set the internet speed so that I could lower their speed?
Here's the device webpage.. Sadly this router don't have a QoS.. If you want more picture of the device interface I would gladly provide them.. So far I only see these 2 pictures as ones that should enable me to configure my network.
 

A:How to control the speed of my internet

A router with QoS may or may not really help. Probably more helpful would be to upgrade (if any of these are available) to higher DSL bandwidth or cable or fiber.
 

Read other 1 answers
RELEVANCY SCORE 45.2

Ive been through both the bios and speed fan and nothing I do can slow the fans down. I have and ibuypower snowblind pc and don't know what the next step would be in troubleshooting this problem
 

Read other answers
RELEVANCY SCORE 45.2

I have a problem: i just bought new motherboard and sometimes i have bsods. Well the fans works always at same speed and i thing it isnt ok. How can i make them chenge the speed in automatic, without FanSpeed software?

A:Fans speed control

Boohoo, no specs. In any case, a BIOS update may take care of it. I had a tornado going on my last board but a quick check and a BIOS update fixed it. There's usually fan control in the BIOS as well. Some motherboard manufacturers provide utilities that will allow fan and temp changes and/or alarm settings. System specs would go a long way in helping to provide specifics.

Read other 4 answers
RELEVANCY SCORE 45.2

Is there any way to control the fan speeds on the system? I checked the bios but since my fans arn't stock (upgraded) they dont appear. No Vista option for the fan speeds either. I have downloaded various programs, SpeedFan ect, but none seem to make my runs run at 100% Its always ranging from 50% to 60%.

Also, are there any good programs to overclock the CPU? I'm having alot of trouble with my MSI Neo P45 motherboard. I've got the right components and all, but it wont let me overclock my QX6700 past 2.8 when it was 2.66. I want to at least get it to 3.44ghz.

A:Fan Speed Control and Overclocking

Hi,

Not sure what's going on with your fans are you sure they are supposed to run at 100% ? - are the correct options enabled in the Bios - worth checking the manual or get it from your mobo's website - also see if they have an updated Bios available.

CPUID has oc'ing functions - it warns you it's at your own risk, of course - they also do HWMonitor which should help you see what's going on with your fans and temps.

CPUID

Hope this does the trick

SIW2

Read other 2 answers
RELEVANCY SCORE 45.2

First time posting here so hoping I do not mess up...

Anyway, my question is about controlling the speed of a mouse that is used on a system that has no settings panel for it. To expand that, I have a Security DVR setup that has mouse support but no keyboard support and all control has to be done with the mouse. Unfortunately, the mouse is way to fast for me and with the embedded firmware, no way to slow it.

Curious if they make a mouse that has a built in physical adjustment for the speed, or some kind of inline control to put between the mouse and USB port that could do this.
 

Read other answers
RELEVANCY SCORE 44.8

Motherboard - IPIEL-LA3 (Eureka3)
Specs Site Motherboard Specifications, IPIEL-LA3 (Eureka3) | HP? Support

I want to Know if theres a Software Program That Can Control Fan Speed!! ..

I have 2 Fan Ports on my motherboard 1 for CPU Fan & the other ones for the Case Fan i Know How to speed up the CPU Fan, But have no clue how to speed up the case fan, If at all its even possible..

Pls Help!!

A:A Tool That Can Control Fan Speed On Motherboard Help Pls..

Hmm, it all really depends on the mother board, and I'm thinking as it's an hp, you can't. However case fans spin at max rpm by default, with most folks slowing them down with the use of inline resistors.

You can try speedfan, it may do something.
Download SpeedFan - Access temperature sensor in your computer

Read other 2 answers
RELEVANCY SCORE 44.8

I have just rebuilt an old PC with various new parts. I thought the processor fan speed would be controlled by the new mobo - but it goes full speed all the time.
The mobo is a Foxconn RC4107MA Intell 775. with a celeron 3.06 processor.
I have checked the bios settings and there is an option for 'Smart Fan Control' which is enabled. Anyone any ideas why the fan speed is not being controlled. Is there something missing??
 

A:Solved: System fan speed control

Read other 9 answers
RELEVANCY SCORE 44.8

I play fair amount of video games a day, and add to that, I live in a hot enviorment.put simply: can I willingly increase or decrease the fan speed in order to accomodate for the high temperature?one key optimizer, a program that came included with the Lenovo laptop, is capable of increasing the fan speed, albeit momentarily for dust cleaning.I already checked the BIOS options, there was no fan control option there of any form, unfortunately. has anyone found any way to increase fan speed?do note, programs like speedfan, dont detect the fan either I would be glad to hear from you. thank you for your time

Read other answers
RELEVANCY SCORE 44.8

I have a new Radeon 8500 I installed in a computer Im building to sell. It works great but the fan is ungodly loud. Its louder than the case fan. I tried the fan from another 8500 and its the same. I was wondering if there was a program to adjust the fan speed. There are no mounting hole in this card so I cant replace the fan.
 

A:Can you control video card fan speed???

Zalman sell a separate fan-speed adjuster for about $ 7-10.-
http://www.zalmanusa.com/usa/product/view.asp?idx=14&code=017

Great if you can interrupt the fan-leads
 

Read other 9 answers
RELEVANCY SCORE 44.8

HP Omen 17 so noisy - how to control fan speed? My new HP omen 17 w010ng drives me crazy - it is so noisy. Even if the Geforce is switched off, the left fan starts to switch on very easily, running a Youtube video is enough. I have read about HP Control software allowing to control fan speed - it was very difficult to install and I only found out that the ventilator settings are already on normal. I switched the ventilators off in Bios, still not much change. Then i ensured in the graphic driver that Geforce is only used for Lightroom and Photoshop, this helped a bit, but still I see that ventilators speed up far earlier then required. I have tried HWinFO64, but no fan speed controls are possible. The freeware Speedfan is the same, I see the fan speed but cannot control it.  I found the freeware Notebook FanControl, but there is no configuration file for Omen 17 available. Did anybody out there solve the problem? How can I control and reduce the fan speed?

Read other answers
RELEVANCY SCORE 44.8

Hi all,
I just installed my new GTX580 and would like to know how to set fan profiles for general internet browsing and gaming as they are constantly at 100% and noisy, I don't mind while gaming because I wear my headset but my missus is stressing me out when she watches TV in the same room. Basically, I would like to lower the fan speeds when not gaming but not sure how to do this. I have the GPU Tweak Utility installed and can manually slide the fan percentage bars but one reverts back to 100% when I click APPLY. I am then asked to BURN but not sure what this means.
I also have MSI Afterburner but the option to move the fan slider is greyed out.
Thanks.

Look forward to any replies.

Paul.
 

A:Solved: GTX580 fan speed control?

Read other 6 answers
RELEVANCY SCORE 44.8

Hello every one.Sometimes I want to control my laptops fan.For example set it's RPM to 100%.But there is no way.I tried "Speedfan" software but it doesn't recognize my fan.I tried BIOS;But there is no fan option in my BIOS.However,"IObit Advanced SystemCare 10" can monitor my fan's RPM.Is there any way to control my fan speed?

Read other answers
RELEVANCY SCORE 44.8

Hi there, I have a ZXDSL 531B router from ZTE. I'm a network newbie here. Now here's the setup for the DSL router with 4 LAN ports, which all are connected to different PCs. And this happens to be the ONLY source of internet to all of us. Here's my needs, I want to control EACH LAN port speed, as it can be shared equally & not one stealing most / all bandwidth & rest left begging . Every computer uses Windows 7. Please help!

A:How can I control Internet speed from DSL router?

Ohh...God, looks like there isn't any answer to this query!

Read other 3 answers