Over 1 million tech questions and answers.

System Restore enabled but no restore points created

Q: System Restore enabled but no restore points created

1. Computer: Windows 7 Ultimate SP1 64 bit, 298 GB HD

I used this laptop to get access to internet to repair my home computer (Windows 7 Home Premium SP1 64 bit). First I messed permissions on home computer and then also on this laptop. Windows installer didn't work on any of them. I managed to repair it on Windows 7 Ultimate with gpedit.msc and installer was fine. However, permissions still weren't. So I gave a try subinacl.msi and reset.bat. It did repair some but not all of the permissions to default. I therefore decided to do a system restore. It took for over two hours and then came up with 'not enough disk space'. I decided to do it again, however, this time a message 'no system restore points have been created' appeared. I knew there are system restore points as I had seen them two hours back. I thought it was something with permissions. So I took ownership of SVI, giving SYSTEM and Administrators full control. I also checked HKLM/Software/Microsoft/Windows/Current Version/Reliability.

I also started and set to automatic the following services:
Windows Event Log
Windows Volume Shadow Copy

The right drive was selected for the restore point.

Is there any thing/service I missed?

SVI is set to 'read only for the content' and I have selected the right hard drive to make system restore on. The selected one is C:\ with OS on it and the other one is F:\ which has system protection off. Is that ok?

Should I add some more permissions to SVI (LOCAL SERVICE, NETWORK SERVICE)?

All I wanted to do was to restore the computer to the state when permissions weren't changed. Now it seems that even this won't work. I know there were at least two system restore points when I first tried to do system restore. I know I didn't delete them. I do not have any viruses as it's related to the permissions I had changed.

Any help would be much appreciated.

RELEVANCY SCORE 200
Preferred Solution: System Restore enabled but no restore points created

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: System Restore enabled but no restore points created

Help anyone?

Read other 1 answers
RELEVANCY SCORE 124

Automatic restore points are no longer being created in System restore on Vista laptop.
Manually created restore points disappear after a short time.
The following are the figures relating to System Restore;
Used Shadow Copy storage space 0 B
Allocated Shadow Copy storage space 0 B
Maximum Shadow Copy storage space 3 GB
Every time I try to increase the allocation the Maximum storage space increases but not
the allocation, and I get a message saying
Successfully resized the Shadow Copy storage association.
Would appreciate any help.
Thanks.

A:Automatic Restore Points No Longer Being Created In System Restore On Vista Laptop

I find this often happens when there are disk read errors. Try doing a chkdsk /r then retry creating a restore point.

Check Disk - chkdsk

Read other 12 answers
RELEVANCY SCORE 120

I may have had some malware in the past, I got rid of it (or I am pretty sure I did).
 
It was worked on in this thread:
 
http://www.bleepingcomputer.com/forums/t/578320/system-seems-slow-i-got-rid-of-some-stuff-but-i-want-someone-else-to-verify/page-2
 
This is a windows 7 x64 Dell system.
 
I thought system restore was making regular restore points after the procedures I did then.
On looking today, I got a message that no restore points had been created.
 
So I created a couple manually.
They declared success. 
 
They seem to be there. The two that I just created are on the list.
 
But I should have many of them. I check the box "show more restore point" but no more appear.
 
So the automatic system restore point creation in system protection is not working.
 
What can I do to get the system protection to be actually working?
 
Well, this is interesting. I have two drives at the moment, my system drive had no space allocated.  So I just allocated 13% to system protection. 250 gb.
The system drive is also second on the list, but I don't know if that is significant.
 
I just looked at the two restore points I created, they both reference my external drive, not my system drive, which is the one that is important.
I just created a manual restore point on that drive. I said success.
I will have to check to see if restore points are being created automatically and post back.

A:System restore has not created any restore points

Hello, Welcome to BleepingComputer.I'm nasdaq and will be helping you.If you can please print this topic it will make it easier for you to follow the instructions and complete all of the necessary steps in the order listed.===Run this tool.The first command is to create a restore point. Post the log for my review.Temporarily disable your AV program so it does not interfere.Info on how to disable your security applications How To Temporarily Disable Your Anti-virus, Firewall And Anti-malware Programs - Security Mini-Guides.Download Zeok tool from hereWhen the download appears, save to the Desktop.On the Desktop, right-click the Zoek.exe file and select: Run as Administrator(Give it a few seconds to appear.)Next, copy/paste the entire script inside the code box below to the input field of Zoek:
createsrpoint;
autoclean;
emptyalltemp;
Now...Close any open Browsers.Click the Run script button, and wait. It takes a few minutes to run all the script.When the tool finishes, the zoek-results.log is opened in Notepad.The log is also found on the systemdrive, normally C:\If a reboot is needed, the log is opened after the reboot.Please attach the zoek-results.log in your reply.Also, please provide an update on how the computer is behaving after running the above script.

Read other 21 answers
RELEVANCY SCORE 113.6

I have 55.8 GB on my hard drive and 6.72 GB left to use. System restore hasnt been working for awhile now I've tried turning it off and turning it back on after a reboot and nothing happens. I've created manual points but none show up in the checkpoint calander. There are zero points in the checkpoint calander and none are being created. I have enough space for system restore to be running right? whats wrong here?

thanks in advance
 

A:No System Restore points/none being created

Hi,

There are several reasons this may occur. Let's take a look at Event Viewer for any System Restore logs that may have been created recently that may help us diagnosing the problem.

Go to Start - Run and type eventvwr.msc and press enter.
Click on System in the left pane.
Click the gray title “Source” at the top of the source name column in the right pane to sort by source name, look for "sr" and "srservice".
Double click on each of these events, then click on the button below the two arrows in the upper right corner. This will copy the event information to the clipboard. Paste the information for each of the two event here. There’s no need to post duplicate Event ID’s.

How do I use the Event Viewer to search for System Restore logs?
http://bertk.mvps.org/html/tips.html#EventViewer

Here are some more links for troubleshooting System Restore.

System Restore Failures to restore:
http://bertk.mvps.org/html/srfail.html

System Restore fails to create an automatic restore point:
http://bertk.mvps.org/html/srauto.html
 

Read other 3 answers
RELEVANCY SCORE 112.4

Hello Everyone - it's been a while since I posted here, so I apologize for any errors I may make.

I have a Dell Inspiron Core I5 Windows 7 SP1 PC with Norton internet security.

My question is: what are the rules that govern when the system will make automatic restore points. I've read several threads here, and there seems to be multiple opinions, from "every 7 days", when volume shadow copy is started, when task scheduler has proper triggers and no conflicting conditions.

My PC wasn't creating restore points automatically. I tried changing the Volume shadow copy to automatic. I added a new task under SR to start at 3:30 PM (as a test), I checked the box to wake computer for this task. The system created two restore points hours apart once, but none since then.

I've attached screen shots showing all my settings, including one that seems to indicate the task did run, but no restore point can be seen for that time. NIS did show the system at an idle state at the time the tasks should have ran.

So to sum it up, do I have my settings incorrect? Is there a glitch in my system? How often should SR create automatic restore points (aside from program updates)?

SR has bailed me out a few times and is quicker than restoring from a system image which I do periodically, along with a separate file backup.

Any suggestions, help, explanations, would be greatly appreciated.

Thank you.

A:System restore points not being automatically created

Is System Protection turned on?

System Protection - Turn On or Off

As far as how often Windows 7 creates restore points, Microsoft says: "Restore points are created automatically every week, and just before significant system events, such as the installation of a program or device driver."

System Restore - Microsoft Windows (see FAQs at bottom of page > How does system restore work.)

Read other 5 answers
RELEVANCY SCORE 112.4

I have used System Restore in Windows 7 to automatically create restore points, but not so in Windows 8 or 8.1. I configured TASKSCHD.MSC for a restore point to be created at 11 pm weekly, but not dice. I just changed the time to create a SR point daily at 7:15 AM to see if a SR point would be created. In Control Panel, there is not record of the SR point, but Task Scheduler says the 7:15 point was completed successfully. However, I can't find it in Control Panel.
Any advice on what to do from here?
Thank you very much.
Doug57

A:Auto System Restore points not created

When creating a restore point, windows checks the last one. If there has been no system change since the last point it doesn't create a new one to save disk space (since the new one would be an exact copy of the last one)

Check the event viewer (control panel > administrative tools ) to see what it says exactly happened when doing the automatic restore point. If there's an entry with "Skipping creation of restore point as there is a restore point avaliable which is recent enough for System Restore." then what I said above might be the problem.

That said adding triggers to the automatic system restore might help you. Go to Task Scheduler (run as administrator) > Task Scheduler Library > Microsoft > Windows > System Restore > SR > Right Click > Properties > Triggers Tab > New > begin the task : on a schedule Daily.. at (whatever time you want).
Then another New > begin the task : at startup

Read other 2 answers
RELEVANCY SCORE 111.2

Hi,
It is a peculiar problem faced by me. I could create SR points and i do not know, whether the SR polints are created by the system. It was creating before. Whenever an uninstall , takes place, it the revo uninstaller creates a restore point, and likewise, some programs if changed or uninstalled create SR points, and it is not showing any error message.
But to my surprise, that which casually checking the available restore points, i was shocked to find the SR points totally missing. or it is vanishing after creation.
Why this behaviour, will you please say and also please inform me whether there are any fixit available.
Creation is always success. but , SR missing . I am only configured SR in c: If i allow , all the programs to create SR, then each is created on huge size. How to allow only system restore creation only please

Read other answers
RELEVANCY SCORE 111.2

I am not being lazy, I have sifted through pages and pages of posts about this problem and have yet to find anything that does not either involve dual boot or some complex solution.

I am running a cleanly installed standalone Windows 8 Pro X64 system which is not creating system restore points for updates, installations, and Revo Uninstaller uninstalls (despite the requisite setting being on in Revo).
I have being doing quite a bit of installation and updating over the past week or so but apart from one manually created restore point the only other was for an installation of Power DVD yesterday.

It seems MS is sitting on its hands on this one.

Is there a simple answer to this problem?

Thanks in advance.

A:System Restore Points not being created (no dual boot)

Have you checked the configuration of System Restore ?
A picture:

Read other 4 answers
RELEVANCY SCORE 111.2

Hi,
It is a peculiar problem faced by me. I could create SR points and i do not know, whether the SR polints are created by the system. It was creating before. Whenever an uninstall , takes place, it the revo uninstaller creates a restore point, and likewise, some programs if changed or uninstalled create SR points, and it is not showing any error message.
But to my surprise, that which casually checking the available restore points, i was shocked to find the SR points totally missing. or it is vanishing after creation.
Why this behaviour, will you please say and also please inform me whether there are any fixit available.
Creation is always success. but , SR missing . I am only configured SR in c: If i allow , all the programs to create SR, then each is created on huge size. How to allow only system restore creation only please

Read other answers
RELEVANCY SCORE 107.6

I have limited space on my C drive where win is installed ever since the accumulation of win updates and SP.

I wish to turn off system restore points on that disk and use the E drive which has ample room but will setting system restore points to that drive instead of the C drive mean it only creates a copy of that particular drive... or is the answer in the actual name... will it create a restore point of my C drive on the E drive?
 

A:System Restore Points Created on Non Win System Drive

Read other 9 answers
RELEVANCY SCORE 103.2

Not sure when this issue started, so not sure if this has anything to do with XP Pro SP3. System Restore appears to function normally until attempt to restore. Select restore point > confirmation screen, click next > result = stays on confirmation screen. No cpu activity. Disabled SR and tried to re-register dll's. Was only able to re-register srclient.dll. Other dll's report loaded but "DllServerRegister point not found. . ." Suggestions please.

A:System Restore runs, creates restore points, but can't restore

Hello & welcome to TSF,

RESOLUTION
To resolve this issue, restart the computer. If the error still occurs, search the hard drive for the presence of the Wininit.ini file, and then rename it. To do so, follow these steps:

1. Restart your computer in Safe or DOS Mode.
2. Click Start, point to Search, and then click For Files or Folders.
3. In the Named box, type wininit.ini.
4. In the Look in box, click Local hard drives, and then click Find Now.
5. Right-click the Wininit.ini file, click Rename, type wininit.xxx, and then click OK.
6. Close the Find Files window, and then run System Restore again.
7. If the previous steps do not resolve the problem, run the following command to repair the damaged portions of your registry:
scanreg /fix

Read other 7 answers
RELEVANCY SCORE 98

I wanted to see what was in some of the restore points of 2005,
so I restored back to a previous date and found software,
photos and things that I thought had been completely erased.
Is there a way to completely erase everything that is in system restore?
 

A:Solved: Can System Restore in XP be wiped clean of all previous restore points?

Read other 16 answers
RELEVANCY SCORE 98

Hello,
I turned on my computer and realized that all of my files and programs were missing amongst all restore points. I ran Microsoft Security Essentials and no viruses were found. Is there any way to recover the lost data or is it a lost cause. I have a Toshiba, Windows 7, Intel Pentium. I am praying that I can recover this.
Thanks,
Ryan
 

A:All files/ programs delete and system restore points..Is it possible to restore data?

Check your user's folder, are you using the same logon account ? Sometimes windows logon fails and you get directed to a temporary account + folders and all your files will seem missing, when instead you are not looking at your previous documents folder.
 

Read other 2 answers
RELEVANCY SCORE 98

I have 8gb of space allocated to System Restore, all monitoring my C partition only. This space is always at least 85-90% used according to the System Protection screen. In the past I have had at least 15 restore points to choose from after ticking "show more restore points." But today I went to do a restore and there were only 7 points, despite almost the full 8gb allocation being shown as nearly full, as usual.

This is happening despite relative consistency in the size of my C partition at about 60gb. As always, I have the "restore system settings and previous versions of files" option chosen. And I've checked to ensure none of the drive's other partitions were inadvertently added to monitoring.

I've had Windows 7 for about three months, and saw a similar situation about two months ago. At that point I turned off System Restore and turned it back on, and things returned to normal. But now it's happening again, and this time I don't want to lose the Restore Points I currently have. Besides, the fact that this is happening makes me both curious and uncomfortable.

I've been creating 60% of my restore points manually. Is it possible those, for some reason, use a lot more space than automatically-generated points?

Would appreciate any ideas on what could be going on, and how to address it.

A:Allocated System Restore space holds far fewer restore points now

I suspect that one of your more recent restore points is taking more than the usual amount of space. This can vary widely. This could be due to a newly installed application or some kind of update.

On the few occasions I have used system restore it has always been the most recent restore point. The further back you go the more likely it is that the restore will fail or cause more problems than it solves.

Read other 2 answers
RELEVANCY SCORE 97.6

For some reason my System Restore function isn't automatically creating (or isn't showing) System Restore points as it should be doing for "major" system events (e.g., isn't automatically creating restore points before/after Windows Updates and software/driver updates). I'm not sure if it isn't creating the restore points at all, or if it's just not displaying them as available restore points.

Another piece of the puzzle - I've manually created restore points at various times, and they have initially shown up on the list of available restore points as expected. However, when I looked at the list today, the restore points I created manually have Disappearead! I'm certain that I didn't delete them. I've selected every option I can think of to show me a complete list of available restore points, but no luck getting them to show up on the list. Also, my "Current Usage" is listed as "0 bytes", even though a few restore points are showing on the list. All of this makes me wonder if the system is creating the restore points, but just saving them in a way that makes them "invisible" to the System Restore utility.

Here's what I've done so far:
- Double checked my System Restore/Protection settings, and my system drive (C: ) is definitely set to "ON".
- Checked the System Restore configuration, and it's set to "Restore system settings and previous versions of files"
- Checked the "Disk Space Usage" for storing s... Read more

A:System Restore isn't creating (or saving?) restore points properly

How often do you defrag and what program do you use for defragging?

Read other 9 answers
RELEVANCY SCORE 97.6

My last automatically System Restore Point automatically created by the passage of time was created 2013-01-23.

No further automatic system restore points are being created (that means not ever, not daily, not weekly, simply no longer created automatically by the passage of time since last January).

I do not see restore points automatically created by other programs, like Acronis 2014 or Kaspersky KIS 2014 which I installed last week. (But the problem goes way back to January, so these new versions are obviously not involved.)

System restore points are still automatically created by Windows Update and by nVidia driver updates.

System restore points can still be created manually.

The SR task is present in Task Scheduler.

SFC /SCANNOW found no problems.

System Restore is still turned on.

There is free disk space for restore points.

The computer is a Dell Studio 9000, aka XPS 435T, core i7 960.
Windows 7 Home Premium with all the standard Windows Updates.
KIS 2013, now KIS2014
Acronis 2013, then 2014, and currently uninstalled.

A:System Restore Has Stopped Automatically Creating Restore Points

Hiyya Keith mate run a chkdsk as well as the sfc you have done already and also these I know you have Kaspersky and so do I (2013) but I still pick up malware with the links .

Disk Check

download the ADW from bleeping computer and if you have CCleaner the run a clean up don't forget to save the cookies that you have that use passwords for site s you need and the registry check any faults back them u before you fix.


http://www.superantispyware.com/

http://www.malwarebytes.org/products/malwarebytes_free/
http://www.bleepingcomputer.com/download/adwcleaner/

CCleaner - Download > download from piriform - you probably have but if not....

Read other 9 answers
RELEVANCY SCORE 97.6

I work with a large software suite. The installer for this suite is really just a collection of many stand-alone installers.

If SR is on when I run the installation, it takes a very long time. Additionally, since this is a collection of other installers, SR is somewhat useless to use as a roll-back, since all of my RPs get replaced with intermediate points from the uber-installer.

The company itself suggests turning off SR so that things won't take so long.

Last time I installed this, something went wrong. I was unable to use or uninstall this software, and I was unable to roll-back the system since the SRs were gone.

Currently, my method is to create a full system backup before I run this installer. A pain in the neck.

Is there a way to save my RPs and then turn off SR while I run this? If something goes wrong, I could then apply the saved RP? Mainly, I am concerned about customer systems where I won't be able to create this backup.

Also, while I appreciate any comments or suggestions about the pain-in-the-neck software suite, there is truly nothing I can do about that. They are getting better with each release, but in the meantime I am stuck with it.

Thanks!

A:Can I Pause/Turn off System Restore WITHOUT losing restore points?

If you turn off system restore you will lose all restore points.



As far as I know there is no way of saving them and reinstating them if you switch system restore back on.

Read other 8 answers
RELEVANCY SCORE 97.6

Hi People,

I have system restore enabled for C: but not for the D: (which in my case is a recovery, as it came from the factory). I have not enabled that to be part of the system restore point creation. BUT STILL, every time there is a system restore point (either scheduled or manual) being made for C:, it also seems to create a restore point for D:. How is this possible?? Is there somewhere I could select the disks specifically other than the control panel>system>system protection?? Because here, only C: is checked.. but still restore points are being created for D:. Of course, when I uncheck the box next to D: and apply, it removes the restore point and it even asks me if I want to turn off restore point creation for that disk. I say yes, but then it comes back out of nowhere.



Thanks for any inputs/solutions. Cheers.

A:System Restore Erratic - Restore Points On Disk "not" Selected

*bump*

Anyone people??

Read other 5 answers
RELEVANCY SCORE 97.6

My comp has been experiencing several problems and is running poorly. I bought an external HD, completely backed up everything important and was about to run a system restore as I had created a manual restore point following the resolution of previous problems. The link to the thread is found below.

However, when I use the system restore wizard, I can only select November 8th, 9th, and 10th...and today is the 10th. I created the manual restore point back in March 2006. I cannot change the month and I have no idea where to find manual points.

Could someone please help me find the restore point I created when my computer was working perfectly?
http://forums.techguy.org/malware-r...s/453201-solved-persistent-spyware-virus.html
 

A:Solved: System Restore: Finding Manual Restore Points

Read other 8 answers
RELEVANCY SCORE 97.6

Since upgrading system restore is not creating restore points automatically. I have to create them manually and then they are being deleted automatically every 3 - 7 days. I tried allocating more disk space to restore but that has done no good. I also use an uninstaller program which used to create restore points but although it tells me it is it's not! I feel very vulnerable now only having a week's worth of restore points - there have been times I've been glad to be able to restore back a few months! Never had trouble before the latest upgrade and haven't knowingly changed any settings. Be very grateful if anyone can solve this for me. Thanks Flissa

Read other answers
RELEVANCY SCORE 97.6

After Tuesday's Windows update I couldn't boot into Windows and loaded my system repair disk planning to roll back to a restore point from the day before. But, the restore wizard couldn't find any restore points. I know my system does it daily and I did a manual one a week prior just to see if it would work and show up. It did.

So, my question is, if the wizard can't find the restore points am I hosed, or is there some other way to point the system to them.

TIA

A:System restore doesn't show any restore points - but they exist

What is your Computer doing when you try to boot...i.e. What happens?
Does the Monitor show anything?
Can you get into the BIOS?

Read other 1 answers
RELEVANCY SCORE 97.6

Hello everyone, not sure why but I get an error every time I open the System Restore. I rarely have to use a restore point as I regularly maintain my computer and check for viruses and malware, but I would like to have the option just in case. When I open System Properties, and click the System Protection tab, I get this error and am unable to create a Restore Point. Attached is a screenshot and a DxDiag.txt. Any insight to this problem would be helpful, perhaps I have some windows feature disabled that I might need enabled, I am not sure. I recently did a complete reformat of my hard drive and a fresh install of Windows, maybe two months ago, and somewhere along the line I must have removed/disabled something I need for System Restore. Even third party maintenance software is unable to create restore points, such as TuneUp Utilities 2014, AVG Internet Security 2014, and UVK. I'm sure the fix for this is simple, I am just unaware of it. Thanks in advance.

A:System Restore Error, Unable to Create Restore Points

You have Tuneup Utilities? Have you looked at this?

System Restore Error 0x81000203 (Below solution at end of this mesage did not work)

Here is some other info as well including the Turbo mode problem

System Restore Error Code: 0x81000203 - Microsoft Community

Read other 3 answers
RELEVANCY SCORE 97.2

I have my Task Scheduler set to create automatic Windows restore points every other day. According to the history log, they are created.

However, they are created under the user "System" and not my account or "Administrators." So, I couldn't access a recent restore point, which I might need to make things run the way I want. I'm having Windows create the restore points so I can access them!

However, it won't create them under my account because I don't have or want a password "Blank passwords are not allowed." I don't want a hassle on startup and God forbid I'd forget the password, so I won't create them. Does that mean that I'm wasting time having SR create the restore points that I think are important for me, and that I might need right now to get my system to run really as it should? Is there a way for me to get those restore points such that I can access them with no password?

A:I cannot access automatic restore points (I think they're created)

You do not need a password to create a system restore point. I just tried it. I have a test laptop with 10 Pro that the user account does not have a password associated with the account or to login.
Go to Start/Search and type System Restore, choose Create a System Restore point.
Also, be aware that everytime you install a software program, Windows automatically creates a Restore Point. If you haven't made any changes to your computer, (ie) installed software etc, there is no need to create a System Restore Point. Also,Remember, that any personal files, like documents, music, pictures, Emails etc do not get backed up when creating a System Restore point.

Read other 6 answers
RELEVANCY SCORE 97.2

It appears that I have created 2 files that system restore uses in creating restore points.
I found that by deleating on of them, system restore returns to functionalaity.
Unfortunately, I didnt make a record of the file name that gets duplicated (slightly different duplicate).

If someone knows the file created and maintaind by the system restore process, I would appreciate you letting me know what it is so I can delete one of them.
TIA
Neil

A:System Restore- Created Duplicate Restore Point Files

Wait what is your asking? System Restore creates restore points, which are hidden in a folder called "System Volume Information" on the root of your system drive. These restore points are actually folders inside System Volume Information, each folder contains versions of system files and data of changes to your system (such as software and hardware installs). If a problem occurs you can revert to a restore point.

If you are worried you have two restores are almost identical you can clear all the restore points leaving the most recent by going to Start (Orb on Vista)->All Programs->Accessories->System Tools->Disk Cleanup.

Vista - On Vista, dialog will open click "Files from all users on this computer", then on following dialog click "OK".
XP - On XP, click "OK" on the dialog that appears.

Now it will start scanning for files that can be cleaned up. When it's done scanning a new window will appear and on the top of that window there will be some tabs, click the tab labeled "More Options". Look for the section that talks about System Restore and click the Clean Up button. Then Click "OK" on the main window. This clears all the restore points except for the most recent and should resolve your duplicate restore point problem.

I do not recommend that you ever delete files or folders in the System Volume Information, as if you need that file and your system crashes you are pretty much screwed.

-Michael

Read other 2 answers
RELEVANCY SCORE 96.4

Hi,
Athan had asked me to create a restore point yesterday to check if my computer was still showing the restore point after a reboot. I did this and after the 1st reboot, it was fine, my restore point was stored. But i opened the system restore today, and its gone again!!!

So, i ran the disk cleanup on all the drives and deleted the restore points. After this, i created another restore point and i called it 'test2'. Everything was fine just like the 1st restore point i created and then, after a couple of reboots, NO RESTORE POINTS AGAIN. I just updated my BIOS and there is a restore point created for this by my computer, but dont know for how long it will be there

PS: I have a HP laptop, and they dint provide a Windows CD, but created a partition D:\ [HP_RECOVERY] which I am supposed to use incase of a system crash. But this drive is full, and I am unable to make any backup disks. Just letting u know cause this might be the problem
 

A:Solved: HELP! System Restore still not storing restore points

Read other 6 answers
RELEVANCY SCORE 96.4

Hi, All,

In my Win XP Pro SP1 installation, my System Restore has a very erratic "memory." It usually only remembers restore points from a few days back, and often times forgets all of my restore points. Even though I regularly create manual restore points (install apps, etc.), they never seem to be available more than a day or so after I create them.

My settings look like this:

Turn off System Restore on all drives: NOT checked
My C: drive: Monitoring
Max disk space: 3.6GB (12%)
My D: drive: Monitoring
etc.

I've also examined the registry (HKLM\Soft\M$\WinNT\CV\SysRest, blah blah) and the keys look good (at default values). Any idea why my System Restore is so brain dead?

Any help would be greatly appreciated!

---Jason
 

A:WinXP: System Restore loses restore points?

Read other 10 answers
RELEVANCY SCORE 96.4

Hi, I need your help.

I'm running a Windows 7 64 bit.

Last week I was going through my game folders and renaming a few of them and adding more info (my folders were a mess, organization wise). I also installed some older games I had on hard drive, to see if I want them anymore. So quite a bit of installing and uninstalling was happening, like say 20 games or so in a week.

Then yesterday one old game would not uninstall (not showing up in control panel list of programs), and so I decided to use system restore as a way to uninstall it. I restored the system to about four days prior...then a weird thing happened. Some of my folders were divided in two, the folder with the old name and another with with the modified name. Like if originally had a folder named "chess games" which had couple days ago during my reorganizing effort renamed to "Fritz Chess 9", now I had both! But they were not exact copies. What was contained in the original folder was now randomly divided between these two folders, like one subfolder in one and the rest in the other.

Also, the there were other folders that some of the actual content was missing. Like the ISO file. If I have 50 game folders, about 15 were affected, either in the sense of having duplicates or having game files missing. I am not sure but I think this happened only (at least mostly) to folders that I had changed the title of recently. The other ones were fine.

What did I do?

-I tried to merge th... Read more

A:Folders changes & system restore points gone after weird restore!

It appears to me something happened when you did the System Restore. I would try that again to the same date and see if it gets rid of all the divided folders. I have never heard of anything like that. Let us know what happens.

Read other 3 answers
RELEVANCY SCORE 96.4

I have a problem with System Restore only keeping restore points 5 days back at the most. So for example, the oldest restore point I have currently is from September 6, 2007. I've had this Vista x64 install for around a month now. I should have restore points dating back to about August 1st or so.

I've got plenty of HD space too......around 500GB free I believe so that's not an issue. I don't have any viruses. I bet this is an easy fix, it's just that I don't know what that is. Vista is supposed to automatically make restore points every day doesn't it? According to this post at this site, Vista is supposed to save restore points for around 136 years. http://www.daniweb.com/forums/thread82418.html

While I don't need it that long, I'd like it save them for around 6 months to a year or even whatever the default is supposed to be. I had a problem with a Windows update about a month ago. I think it was a security update or something. Anyway, I don't know which one or why, but it borked my system and I couldn't even boot, not even in Safe Mode. So I put the Vista x64 DVD in and went to use System Restore and I didn't have any restore points. I had no other choice than to reinstall Windows. I just want to know why it's doing this and how I can stop it before I have to use System Restore again and I have to reinstall again.

Thanks in advance!
 

A:System Restore Deleting Restore Points Automatically....

Read other 15 answers
RELEVANCY SCORE 96.4

Why does system restore only shows the two restore points where I backed up my computer to my external drive. And If I try to restore that, then it says, The backup drive could not be found. How would that matter though? I mean I only backed up my system to an external drive. I didn't create a system restore point to my external hd.

I created a manual system restore earlier today and now it's gone for some reason.

A:System Restore only shows limited restore points

So I created another manual restore point in System Restore but now it's also gone. Can someone help me with this, please?

Read other 9 answers
RELEVANCY SCORE 96.4

Firstly, I can only create manual restore points in System Restore but they usually disappear
overnight and, as a novice, I am at a loss to understand this.
 

Read other answers
RELEVANCY SCORE 96.4

Hello everyone,

I have a repeat problem that I cannot explain: My system creates system restore points just fine (at least, the ones I create manually and can confirm that they are there), but they vanish upon restart.

I have a Toshiba Satellite P750 running Windows 7 Home Premium.

I discovered this issue for the first time in November 2012 when my computer had a hard crash. That was when I learned that it was deleting my restore points. I was forced to do a factory reset. After that, System Restore functioned normally--for a while. Then it began eating restore points again.

About a month ago, I had to do ANOTHER factory reset. Again, System Restore started working--creating and keeping restore points. But just a few weeks into a "brand new" system and they're completely gone again.

I can't understand why this keeps happening even after factory reset.

This is a problem I've investigated multiple times over the last few years and haven't found a solution for yet.

Does anyone here have any advice?

Thanks!

A:Laptop eats System Restore Points--even after out-of-the-box restore

I have had similar problems in the past with System Restore (the restores points don't get lost, they just don't always work) so I turned it off and just depend on imaging now, using Macrium Reflect Free (here is a good tutorial on how to use Macrium Reflect). I've yet to have an image fail to restore.

Read other 3 answers
RELEVANCY SCORE 96.4

System Restore is no longer creating automatic restore points. All the necessary services are set to automatic, ie: task scheduler, volume shadow copy, microsoft software volume shadow copy, windows backup, and remote procedure call.

I tried disabling SR, then performed a disc cleanup, rebooted, then enabled SR. All that did was enable me to create ONE system restore point ONLY. If i try to create an additional restore point, I get the following error message:



Help!!

abe

A:System Restore not creating automatic restore points

Hi,

You might want to try






Quote:
Do you have any security software installed on the computer?
Are any third party backup programs installed on your computer?
Verify if these two services are started and running on your computer. If it’s not started, start the services and check if you can create a system restore point.

a) Volume Shadow Copy service
b) Windows backup

Also ensure that their dependency services are running.
Verify if their dependency services are running.

You can check this information from services.msc. To do this follow the steps below:

a) Go to start and type services.msc in the search field.
b) Locate the two services.
c) Right-Click on the service one at a time.
d) Select properties.
e) Go to Dependencies Tab.
f) Note the dependency services.
g) Make sure they’re also running.
h) To start a service, right click on it and select start.


From many users facing the same issue, turning off system restore for the hard disk on which Windows is installed and turning it back on seems to have solved the issue.
You may try the same.


Original Source
OS

Read other 2 answers
RELEVANCY SCORE 96.4

it's turned on, i've created several restore points but i went in to do a resotre because of my office word 2003 appearance because it changed from the rest of the suite. my restore points are not there. none of them, if i stuff something up on here i will have to re-install windows. i don't want that. help me please.

A:Windows XP System Restore not saving restore points

See if this Information helps.

Read other 8 answers
RELEVANCY SCORE 96.4

Hello everyone

I recently ran Advanced System Optimizer 3 and optimized my system in a hurry. Without thinking and to my regret, I did not manually create a system restore point before doing this.

I have noticed several changes (albeit non-major but nonetheless uncomfortably different) with my use.

1. Certain thumbnails/links which are supposed to have images on them now appear to be broken (that paper torn in half sign instead)

2. Hotmail's autocomplete whenever you start typing an email addresses' first few words no longer functions.

I have yet to discover more irregularities but as far as I know Advanced System Optimizer must have removed or deleted something after I clicked optimize now which is causing all these.

I tried to system restore it to a time before I actually ran the optimization which was about 9 am on 9th of November 2011 but all I see is an 11 am restore point on the same day in the restore point list. When I click show me more restore points, it does not show me more but remains with just the 1 point which I've said.

Is my case already a goner and it's already too late to turn back or is it possible to somehow access more previous restore points? It would be better still to access a 8th of November 2011 restore point (which again presently shows only the 9th of November point and nothing else), BEFORE I did a scan of the system even and just revert everything to how it once was.

A:System Restore not showing more restore points after clicking the box

Here's a follow up to my case, I've managed to solve problem no.1 as I found out that it occurred in almost all websites I tried to access. It mainly showed the HTML coding instead of all the usual colours and decorations. So what I did was hold shift and click refresh and it solved everything including the thumbnail not appearing issue. Apparently after doing this everytime I returned to those sites it didn't give any problems.

The Hotmail issue still persists though. I am quite an email heavy user and find this quite annoying. Whenever I click reply, it's as if I'm composing a completely new email with no address in the bar, no RE: subject and no previous incoming email which I can refer to in replying that email. The autocomplete email address email still persists.

Any help on this?

Edit: It all eventually solved itself.

Read other 1 answers
RELEVANCY SCORE 96.4

Hello everybody

Finally finished the project I started, because I found that if I wanted to run System Restore on my computer ( with Windows Vista ), it took ages before it opened.
The tools provide the ability to run a Restore Point,
without the standard interface of System Restore.
Please read the readme file for more info.

Kind regards
Sweet

A:Run Restore points without the standard interface of System Restore

Yet again another nice tool Sweet

Tom

Read other 1 answers
RELEVANCY SCORE 96.4

I have seen numerous people are having this problem but I have not been able to find a solution that works for me. I figured I would post my own problem and maybe somebody could recommend a solution.

I have been trying to use Windows System Restore on Windows 7 Home Premium. I have created several restore points on my own but when I restart and run the program, it says I have no restore points available. I have 40 gb allocated for restore points and have used less than 10 percent of my hard drive space.

does anybody know of any good process to follow that will fix this issue and make System Restore usable.

Thanks a lot.

A:Windows 7 System restore problem no restore points

Have you tried ticking show more restore points?

Read other 9 answers
RELEVANCY SCORE 96.4

Automatic Restore Points is not working in System Restore. Task Scheduler is empty during last 30 days.

A:Automatic restore points is not working in system restore

Hello Rocasan,

Double check to make sure that System Protection is turned on for your Windows drive.

Next, use the free program CCleaner to see what it shows for what restore points you may have like below.

Hope this helps for now,
Shawn

Read other 13 answers
RELEVANCY SCORE 96.4

Hi

I have windows vista (32bit) and have been having problems with system restore recently. When I try to use system restore it tells me that I have no restore points. I can make manual restore points but there are no automatic points and when I next try to use system restore often the manual restore points I made previously have disappeared!

Any Help would be greatly appreciated.
 

A:System Restore Won't Generate Restore Points Automatically

Read other 7 answers
RELEVANCY SCORE 96.4

Hi;

Brand new laptop running Vista 32-bit. Went to verify that System Resore was periodically creating restore points, and despite the app appearing to be set-up correctly, there are no auto restore points listed- just the ones generated by various software chages. Any suggestions what's going on because as mentioned, the feature is active- just not automatically establishing restore points-

Many thanks in advance
Webz
 

Read other answers
RELEVANCY SCORE 96.4

Hi,

I need help here. For some funny reasons, the restore points created tend to get delted when I boot up my laptop the next day. How do I ensure that my restire points remain. I checked my drive and it still says 7 GB free.

Also, is it possible to auto create the restire point but store them in a different partition on the samd drive?

A:restore points created tend to get deleted when I boot up

Hello Futuristic,

Are you dual booting with Windows XP by chance?

If so, then this may help.

System Restore Points - Stop XP Dual Boot Delete - Vista Forums

EDIT:
Sorry, but you will only be able to have restore points saved on the same drive letter that they were created for. Any tampering with them will most likely result in them to no longer work to restore with.

Read other 8 answers
RELEVANCY SCORE 96.4

Automatic restore points are no longer being created in System Restore
on Vista laptop.
Manually created restore points disappear after a short time.
Would appreciate any help.
Thanks.

Read other answers
RELEVANCY SCORE 95.2

My new notebook, running Windows 7, crashed 90 minutes after first boot and created a recovery partition. (Affects C:\ drive only. No programs or drivers were being installed. Starts up OK & is functional).

Restore points are now unavailable from the time before partition was created. When a system restore cannot be performed, will system remain unaffected if I do nothing to the recovery partition?

A:Recovery partition created - suitable restore points now unavailable

A recovery partition is normally created by the computer manufacturer during the manufacturing process. It's about 10 - 15GB in size and on a hidden partition of the C: drive. Its purpose is to allow the user to return the computer to factory specifications, just like the day you bought it. I've not heard of a recovery partition being created as the result of a crash. It would help if you could post a screenshot of your maximized Disk Management window.

How To Access Disk Management in Windows 7

Screenshots and Files - Upload and Post in Seven Forums

If your computer was on for just "90 minutes after first boot" before crashing, was this the computer's very first startup after bring it home from the store? When you would normally be configuring a new machine with your user preferences, setting the language, etc? Or do you mean it was the first startup of the day? A crash could cause many different problems and that could be the reason you have no restore points. It's also possible something may have turned system protection off before the crash occured which could have left the computer without any restore points.

System Protection - Turn On or Off

Read other 9 answers
RELEVANCY SCORE 95.2

Automatic restore points are no longer being created in Windows 7 Vista machine.
Manually created points disappear after a short time.
Would appreciate any help.
Thanks.

A:Restore Points No Longer Being Created In Vista Windows 7 Laptop.

Do you have "system protection" turned on for the drive you want to create restore points to?

Read other 5 answers
RELEVANCY SCORE 94.8

Hi there,

My Windows 7 Home (64bit), Dell 1721 Inspiron has just crashed. I cannot enter Windows in Safe Mode.

I can however access the System Recovery page but it says that it cannot find any restore points. The message is:

"To use System Restore, you must specify which Windows installation to restore.
Restart this computer, select an operating system, and then select System Restore".
The issue is actually as described here:
SATA Drivers - Load in Windows Recovery Options, i.e. no Operating Systems are being shown.

I know the machine creates regular Restore Points; I had even checked this in Task Scheduler in the past and all was working fine.

In order to show the Operating Systems it is requesting that the hard disk drivers are installed.

I've downloaded the AMD SATA drivers from here: DriverPack Mass Storage 10.03 for Windows Vista (x64) | DriverPacks.net

and when I click "Load Drivers" then it says "Adding Drivers..." and then it goes back to the same screen, i.e. the first screen here: SATA Drivers - Load in Windows Recovery Options

So to summarise, I know there are restore points, but I cannot access them.

I'm really stuck so any ideas are appreciated.

Thanks

A:Please Help - System Restore cannot find any Restore Points?

  
Quote: Originally Posted by No expert


Hi there,

My Windows 7 Home (64bit), Dell 1721 Inspiron has just crashed. I cannot enter Windows in Safe Mode.

I can however access the System Recovery page but it says that it cannot find any restore points. The message is:

"To use System Restore, you must specify which Windows installation to restore.
Restart this computer, select an operating system, and then select System Restore".
The issue is actually as described here:
SATA Drivers - Load in Windows Recovery Options, i.e. no Operating Systems are being shown.

I know the machine creates regular Restore Points; I had even checked this in Task Scheduler in the past and all was working fine.

In order to show the Operating Systems it is requesting that the hard disk drivers are installed.

I've downloaded the AMD SATA drivers from here: DriverPack Mass Storage 10.03 for Windows Vista (x64) | DriverPacks.net

and when I click "Load Drivers" then it says "Adding Drivers..." and then it goes back to the same screen, i.e. the first screen here: SATA Drivers - Load in Windows Recovery Options

So to summarise, I know there are restore points, but I cannot access them.

I'm really stuck so any ideas are appreciated.

Thanks



If I am not mistaken the message is not saying there are no restore points, it is saying you must select which windows OS you want to restore. DId it come with another OS on it (ie vista) ... Read more

Read other 4 answers
RELEVANCY SCORE 94.8

System restore failed to extract the file ? from the restore point. There was a disk failure during the restore. This might be caused by bad sectors on the disk.

I get the same message, but with a different file name, with every restore point I try, and I have now tried all seven available restore points, going back to 30 Dec 2011.

The computer was working perfectly until 3 days ago when it blue screened, and has not started properly since.

It is a Corei5 with 4 GB RAM and is only 12 months old. I just don?t believe the drive has that many bad sectors.

Given that it won?t start and it won?t restore, is the only solution to reformat and start again?

A:System Restore Fail on all available restore points

Have you done a Disk Check on the drive to attempt to fix/recover the bad sectors? That would be the first step.

Disk Check

Read other 9 answers
RELEVANCY SCORE 94.8

Regarding system restore.

I have an 80gig hd with 23gig spare. In system properties>system protection>automatic restore points, I have ticked drive C. Yet there are no restore points listed unless I do a manual restore point.

Is there another setting somewhere that may be inhibiting automatic creation of restore points?

Thanks
 

Read other answers