Over 1 million tech questions and answers.

Windows 7 Old digital Camera

Q: Windows 7 Old digital Camera

Good Evening,

We recently purchased a new laptop for our mother and it came pre-installed with windows 7 Home Premium 64-bit. We were able to migrate everything over except for her digital camera drivers. I have done a lot of research into this problem and found that the company has 32-bit drivers available for windows 7, but state that 64bit is not supported.

Is there anything I can do? Besides installing Windows 7 32bit?

Thank you,

RELEVANCY SCORE 200
Preferred Solution: Windows 7 Old digital Camera

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Windows 7 Old digital Camera

Quote: Originally Posted by ClNorris


Good Evening,

We recently purchased a new laptop for our mother and it came pre-installed with windows 7 Home Premium 64-bit. We were able to migrate everything over except for her digital camera drivers. I have done a lot of research into this problem and found that the company has 32-bit drivers available for windows 7, but state that 64bit is not supported.

Is there anything I can do? Besides installing Windows 7 32bit?

Thank you,


there may be several work a rounds.

Dual boot 64 bit and 32 bit till the images are exported.

Run a virtual machine (if your hardware supports it)

We could use more info on the camera and the format it exports. there might be other ways
Ken j

Read other 6 answers
RELEVANCY SCORE 61.2

Well...I looked, but can't find anything specific to my problem. My stepdaughter has Windows NT and a friend bought her a polaroid digital camera. One of the cheap ones, I think. But... the problem is that she called Polaroid support and they told her that her camera was not supported by Windows NT. It shows that her camera is not connected. I have tried all the ports that are working , and they all give the same error message.

Sooooooo...my question is this. Does anyone know if Windows offers a driver that would allow this camera software to work? And, if so, where would I locate it, and on and on and on...

Thanks for any help.

Terbear0007
 

A:Windows NT and Digital Camera

Read other 15 answers
RELEVANCY SCORE 61.2

looking for a camera that works in windows 10
 

Read other answers
RELEVANCY SCORE 60.8

(Edit - Subject should read 'Microsoft Camera Wizard does not work anymore with Canon digital camera')

I have a Canon SD 700 IS digital camera bought about 15 months ago. Until recently, I could connect it to the USB port (same one each time and that port is not used for anything else) of my Windows XP PC (1 year old, bought new) and the Microsoft Scanner and Camera Wizard would appear allowing me to use that software to transfer my digital pictures to my PC. Now, that does not work. I tried reinstalling the Canon EOS utility that came on a CD with my camera - no success in getting pictures transferred with that. The only way I can get the pictures to transfer, is to open Windows Explorer, the camera shows up under My Computer, but if I right click on Get pictures highlighting the camera listing, after multiple trys and 30 minutes, I get the few dozen pictures to transfer.

Anyone know what to try? I am suspecting it has to do with a recent overhall of my PC anti-spyware and security software (details below) as was using Lavasoft and Spybot before and found them becoming less effective. My computer is anti-malware free as far as I know from anti-spyware scans with multiple products (at least twice weekly) and real-time protection and anti-virus scans a little less frequently which Zone Alarm has never from day one found any viruses.

The computer is recognizing the camera in the USB port (it is enabled) and camera powered on and has no issues when taking pictures.... Read more

A:Microsoft Camera Wizard does not work anyone with Canon digital camera

Read other 8 answers
RELEVANCY SCORE 60.4

Hey all got my girlfriend a HP digital camera for x-mas and she runs a really old computer w/windows 98. She said she successfully installed all the software correctly and connected the camera then turned it on. The camera then said "Connected to PC" however the computer doesn't pick anything up when she goes to HP's program... I am unforunately to far away to examine this and a beginner myself for the most part and she is not versed well at all in computers to be honest which makes it harder.

If someone could please help make our Christmas better I'd very much appreciate it since we cannot afford a new computer at this time ... If it all possible please explain it in a way we can easily understand so we may apply it.

Thanks in advance all hope someone can help =/....
 

A:Windows 98 USB Digital Camera Problem Please Help =/...

If the computer is not running W98SE (Second Edition), you may have a problem with the USB connectivity.
 

Read other 3 answers
RELEVANCY SCORE 60

Hi, I'm having trouble with my digital camera software and/or transferring pictures from my camera and dock to pc. I have a Kodak cx7525 digital camera. The software loads normally, but when trying to open the software or trying to transfer pictures to the pc, I get an error message that states a .dll file is missing. The dll file is LOCACQMOD.DLL. I contacted kodak and they sent me new software but that didn't help, still get the same error message. The camera works fine but cannot get the software and camera to work on pc. I have searched for the dll file but cannot find it and have no idea what it is or what it does. I'm guessing something is missing from the pc instead of the camera software. Any help is greatly appreciated. I have family photos stored on it that I would love to be able to save them and not lose them. Again, thanx for any help I can get. You guys and gals are the best.
 

A:Cannot get digital camera software to run and pictures will not transfer from camera

Read other 11 answers
RELEVANCY SCORE 59.6

When i try to sync my HP Photosmart 720 Digital Camera with my XP SP2 computer, the camera's drive appears in Explorer but the OS won't allow me to access it. However, when iuse Windows XP SP1 (on the same computer) the camera's drive opens OK and i can see and copy the pictures stored on my camera's memory card. is there something in SP2 that needs to be changed?

James
 

A:Can't access Digital Camera via Windows Explorer

Read other 6 answers
RELEVANCY SCORE 59.6

I have a client that recently bought a Canon A540 digital camera. They could not get it installed on their main PC. They were able to get it installed on the other two PCs though.

When I tried to install it on the main PC, Windows XP does not recognize the camera. It does pull up the box that asks you what you what software you would like to use wih the device, but there is nothing listed inthe box. On the other PCs it recognizes the camera as a Canon digital camera. I have tried reinstalling it with the updated drivers and still no luck....
 

A:Canon digital camera not recognized by Windows

Read other 16 answers
RELEVANCY SCORE 59.2

Hello:

I just bought a Canon Powershot A2000 IS and I tried to install the software disc provided tonight. It fails right away that my OS is not compatible. I run Windows Server 2003 and going back to XP is not an option. I can see the camera listed in Computer Management just fine and I was hoping to at least view the camera as a memory drive in My Computer..no go.
From what I see online Canon has no plans to release 2003 drivers.
I also found a program that will convert the 2003 server code to XP but it's made by a user overseas and there is no way I would trust that.
Is there any good free software out there that will allow the transfer of the images to my computer?
I only have the USB cable supplied and do not have a card reader. Would a card reader recognize the attached camera?
As long as I can get the files transferred I have other software to do simple things like resize, crop etc. Most of the pictures will be just emailed,etc but the real problem is getting them off the camera.

Thanks!!
 

A:Windows 2003 Server and Digital camera help needed

Read other 12 answers
RELEVANCY SCORE 58.8

Hi,

I recently purchased a digital camera for ordinary use with my pc. Everything seemed great until it was time to connect the camera to the pc - directions: "connect the USB end to any USB port on your pc" I have a reason to believe I don't have a USB port.

I know I must clarify that my computer is extremely outdated by today's standards. It has Windows 95 and is about 5 years old.

My main problem:
I have a digital camera with no way of transmitting my pictures to my pc for viewing and sharing.

I did some research. Along with my camera I have a 32 MB memory card. I went to the site prescribed by my digital camera manual and I found this:

http://www.dcprodirect.com/new/inde...hotosmart+318&searching=&searchfor=&AccId=525

By chance, would I be able to put the memory card with my pictures on it into this card reader and would it work? It says it is compatible with Windows 95.

The type of dig. camera I have is an HP Photosmart 318.

I am extremely grateful for any tips or help anyone has to offer. Thanks a million!
 

A:Digital Camera/Camera Software Expert, Anyone?

Read other 6 answers
RELEVANCY SCORE 56.8

I just purchased a new digital camera and when I went to install the driver cd that came with it, it said the driver is not compatible with my version of Windows (7). Is there anyway that I can find a new driver? I'm not very knowledgable with drivers and if this possible. Or if not a driver is there anyway that I can get the photos off the camera to my computer...took alot of photos I don't want to lose.

The camera is from a company called Digital Concepts, the driver cd has a company called Sakar International on it. I hope thats all the info that would be needed for someone to help me!

A:Digital Concepts Digital Camera

Hello Alabama Belle, and welcome to Seven Forums.

Do you have the model number of the camera? You can also check at the manufacturer's website to see if they may have any drivers available to download that may work for you.

In addition, if you have a media card reader installed on your computer, you can take the card out of the camera and plug it into the media card reader instead to upload your pictures.

Hope this helps,
Shawn

Read other 1 answers
RELEVANCY SCORE 56.8

...why for my digital it is telling me Camera not connected when it worked fine before I tried to get my new Veo Web Camera to work.

I just bought and ran the software to install my Veo Web Camera, but it's not working. In my device manager it is listed under imaging devices and under USB Controllers the things that are supposed to be there are too...I've uninstalled and reinstalled and still nothing...anyone have any idea what's going on?? I'm getting so aggrivated! I know my computer is a piece of you know what, but this camera should work dang it!
 

A:Web Camera, Digital Camera Question about...

Just wanted to post that I downloaded the directx drivers from the Microsoft website and it worked.

Still says "camera not connected" for my digital? Any ideas!
 

Read other 1 answers
RELEVANCY SCORE 56

Hello, basically I want to know if it's possible to change the status of my digital camera when I plug it in. It always loads up as a "Removable Disk" because it has photos and videos on it, thus I cannot record or go on video conversations with people I know, but I want to be able to use it as a web cam so I can record myself through the computer like that the camera doesn't die on me while I'm recording. I've read the "Owner's Manual" and I did not find a single thing about setting it up as a web cam.

My digital camera is Centrios Digital Camera 6MP/7MP 2518151 (Silver).

Thanks
 

A:Digital Camera showing as "Removable Disk" instead of regular camera/web cam.

Not every digital Camera can be used as a Webcam, your best bet is to email the mfg.

I tried looking on their web site but it didn't even show Camera's as a Link?
http://www.centrios.com/
 

Read other 2 answers
RELEVANCY SCORE 52.4

Hello guys, it's me again.

So today, I went to Walmart with the intention of getting a Canon Powershot A1200. Seems they do not carry this but could order online. So I could not see how it looks like, bulky or thin, etc. (and uses batteries, which I like).

The next 2 choices were:

1) Canon A2200 (floor model only, 20% off) from $79. Nice and thin, but don't know much about it.
2) Nikon Coolpix S3100, also floor model, 20% off) from $79. Nice and thin and likewise.

They are NOT re-ordering these models.

The rest were Sony and Kodak, nice and thin but didn't look at them.

I had actually preferred a camera that uses AA batteries, as opposed to lithium. I had a Kodak Easyshare that I had for many many years that ran on lithium and it just died after many years of service. I don't mind buying batteries, I only want a camera for my trip this year, otherwise, I'm not much of a picture-taker. That is why I need to keep it under $80.

[PS - I just saw a youtube video on the Nikon Coolpix and guy didn't seem to like it, too many features the guy didn't like, like the time between shots was too long, etc. I would not like that either.]

I'd truly appreciate any opinion or suggestion. Thank you very much.

[ I could also order the Canon A1200 online, no problem. I just wished I knew if it were thin and slick, the picture alone does not satisfy me.]
 

A:Getting Digital Camera

Canon website has some great information on both models you mentioned. I would start there with your questions about size, etc. This is the link to the A1200.

Rosie
 

Read other 1 answers
RELEVANCY SCORE 52.4

This might be a very dumb question but I just got a new canon digital camera can it be used as a web cam? I have a logitech one that is old and it has terrible resolution.
Thanks, K
 

A:digital camera used as web cam

Some can and some can't.You need to check cannon's website for that info.
 

Read other 3 answers
RELEVANCY SCORE 52.4

I have had this camera for almost a year and have just recently started having problems with it. It makes me wait an excessive amount of time to take a picture and in between taking pictures. Is there any type of update for digital cameras or is this a sign that I need to get a new camera?
 

A:DXG-308 Digital Camera

Read other 6 answers
RELEVANCY SCORE 52.4

Could I get a few solid recommendations for a digicam $200 and below?

I know nothing of them and my father is going on a trip and would like to purchase one. It'll probably be used mostly for landscapes, family & friends, and also products sold on eBay. Thanks!
 

A:Digital camera under $200

Read other 6 answers
RELEVANCY SCORE 52.4

I've lost the software that came with the digital camera model DXG-308, is there anyway I can download that software
 

A:DXG-308 digital camera

Hi.

Welcome to TSG.

There seem to be a number of sites offering the driver for download for that camera.

Just google "dxg-308 driver" and you will have a choice. Some are free after registering, some cost a little bit.

Good luck
 

Read other 1 answers
RELEVANCY SCORE 52.4

I need some help my DVC 325 I have it installed but I don't have an application to view the pictures and when I go into Printers and other devices in the control panel there are no programs available to get the pictures . So what do I do now? I have tried several diff free programs but none have helped.
 

A:Digital Camera

I did a search nd found this.

http://www.kodak.com/global/en/service/software/dcWinXp/dcWinXpSoftware.jhtml

Scroll to DVC325, and read.

Brief coverage

"WINDOWS XP blocks the installation of this software from your KODAK DVC325 Digital Video Camera software CD. To use this device with WINDOWS XP, you need to install the WINDOWS XP Driver Software available on the DVC325 download page ( http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=5764 ). If you would like to install the Presto! software bundled with your camera, please contact NewSoft at http://www.newsoftinc.com ."
 

Read other 1 answers
RELEVANCY SCORE 52.4

I have a Nikon Coolpix S210. Windows 7RC Build 7100, 32 bit did not recognize this camera when connected to my computer via USB. However, I installed the 64 bit version of Win7 (same build) and this version recognized the camera immediately. With the 32 bit I installed the Nikon software and drivers but that did not help. With the 64 bit I installed nothing, it worked automatically.

A:Digital Camera

And would you believe some people still have the nerve to say 64-bit is not better than 32-bit ...

Read other 1 answers
RELEVANCY SCORE 52.4

I am trying to install a hewlett packard model 315( which is maybe 7 yrs. old) to windows xp operating system. I can't seem to get puter to see it. Is it not compatable? Thank you.
 

A:digital camera

Read other 8 answers
RELEVANCY SCORE 52.4

I am running Windows xp. I have a Sony Digital Camera. When I plug it in the USB Port the Auto play window use to pop up But dosen't anymore. I can still view it by going into MY Computer and right clicking on the f: drive and then Auto Play. Is there anything I can do to get the Autoplay to pop up again when I : turn the Camera on.
 

Read other answers
RELEVANCY SCORE 52.4

Hi everyone.

I want to buy a cheap digital camera (under $200) but I don't know what to look for when buying one. Could someone tell me how to choose an acceptable, cheap digital camera? What brands/models are good? What do I need to know before buying one?

Thanks in advance.

-Jonathan
 

A:Digital Camera

Read other 9 answers
RELEVANCY SCORE 52.4

Does anyone have any experience with the Fuji fine pix S 5200 camera?
 

A:digital camera

I don't...but what information are you looking for? maybe someone can help find answers
 

Read other 3 answers
RELEVANCY SCORE 52.4

I am taking the plunge and switching from a 35mm film camera to digital. After doing some research, I have decided to go for good quality SLR. Since this will be a major investment, I would like some pointers from those of you who are more experienced in this area. What should I look for? What are the best buys? The best brands? Your opinions are appreciated! Thanks!
 

A:What Digital Camera do you use and why?

Read other 10 answers
RELEVANCY SCORE 52.4

Several weeks ago I bought a Digital camera (Kodak Z650) and installed the software that was included. I down loaded my pictures to the software and things worked ok. I went to the Microsoft site to see what there was to download about Digital Photography and found some tips on transfering your pictures to the computer (Dell Dimension with Windows XP).
The document called, "Downloading pictures from your digital camera" indicated that when you connected the camera to the computer (via USB cable) Microsoft Scanner & Camera Wizard would pop up. The Kodak software comes up but no MS Wizard. I then shut down the Kodak software & tried again, no MS wizard. Can anyone give me a hand??
Ralph
 

Read other answers
RELEVANCY SCORE 52.4

We are trying to hook up a new digital video camera to our new Dell laptop - unfortunately we were idiots and didn't read all the directions, and we didn't ignore the warning that the software hadn't been verified by Windows and followed their recommendation to stop the installation...only problem, we weren't supposed to do that and now we can't get the laptop to recognize the camera....

help?
 

A:new digital camera

Try to do the installation again from the start. If that fails, or you still can't get it to work, see if you can uninstall it from the Control Panel. Finally, you may have to contact the manufacturer to find out how to manually remove the software so you can properly install it.
 

Read other 1 answers
RELEVANCY SCORE 52.4

My computer does not display the "new hardware found" when I plug in my digital camera. When I go to the device manager for the usb port, and click on the camera, there is no "resources tab" for the camera. Help! I am so frustrated. I loaded the software for the camera without difficulty. Since the camera is not a "gateway" brand, the gateway support people won't help me. I'm desperate to find a solution.
 

A:digital camera

Read other 12 answers
RELEVANCY SCORE 52.4

Hello guys,

I have got a digital Camera from Hitachi. When I connect to my PC under Windows Vista nothing happens, I have tried different usb ports. My chipset etc drivers are up-to-date. Please help me.

A:Digital Camera Help

Is this only in your vista build, (I see you dual boot), or is it a universal issue?

Read other 6 answers
RELEVANCY SCORE 52.4

Ok I wouldn't usually post something like this but I don't know that much about digital cameras, I have a 1 gig SD card from a older one so I'm wondering of getting a new one that uses SD and willing to spend around 600 canadian. What are some good ones? I'm looking at canons and they can do videos of 30fps and ok quality, I was wondering if anybody has one is there a time limit on how long the video last or does it just countinue until the card is full, also has anybody bought water proof cases and took their camera swimming or something, I'm quite interested in underwater photography and i guess last what's better overall having more megapixels or more optical zoom? Yeah, so thanks suggestions are appreciated
 

A:Looking to buy a new digital camera.

Read other 16 answers
RELEVANCY SCORE 52.4

Hi i'm new to your group...and i would like some help with my digital camera it is a vivitar cam 3635 i need step by step on how to get the pic into my save files from my scanner HP Scanjet 4300Cse...and also how to get them into ebay? thank you for all your help....
 

A:digital camera help

Not sure why you would need the scanner so ignoring that part.

http://www.vivitar.com/CustService/custserv.html
 

Read other 1 answers
RELEVANCY SCORE 52.4

my computer will nt recognize my camera ever since i reinsalled win98. but it recognizes my scanner on the usb right next to it
 

A:usb digital camera

Read other 6 answers
RELEVANCY SCORE 52.4

I was wondering if there is a way to make a USB HP Digital Camera a letter drive. I need to try to bring images back and I got the one from the card by a card reader. This program I am using only lets you bring stuff back that are on letter drives. Does anyone know a way I can make the camera a letter drive?
 

A:USB HP Digital Camera

Since a camera is not defined as a removable storage device or a read-write device, you won't be able to map a drive to it.

Though if someone can prove me wrong, it would be very impressive!
 

Read other 2 answers
RELEVANCY SCORE 52.4

I just bought a digital camera and it take small movie clips but when I download to my computer I cant play them.When I try I am told I need video/x-pn-jpeg-plugin.Can someone please tell me what I need and where I can get it...Thanks
 

A:digital camera

Read other 9 answers
RELEVANCY SCORE 52.4

Hi All,

I have recently become aware of an item in my "My Computer" folder called "My Digital Camera". This is what it looks like:-

I did not install this and don't know where it came from. There is no install information and I can't even find where the main files are located. Right clicking only produces "Explore" and "open" options. When I open it, I can then select the help/about menu and get the following.



Note, the date is 1998. I would have expected an installation folder somewhere, but can't find one.

While this doesn't appear to be malicious, I would still like to get rid of it. Anyone any suggestions?

Mike.

P.S. HJT log

Logfile of HijackThis v1.99.1
Scan saved at 4:38:55 PM, on 11/07/2005
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Microsoft Shared\VS7Debug\mdm.exe
C:\Program Files\Canon\MultiPASS4\MPSERVIC.EXE
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\Tablet.exe
C:\WINDOWS\Explorer.EXE
C:\Progra~1\ASUS\Power4 Gear\BatteryLife.exe
C:\Program Files\ScanSoft\OmniPageSE\opware32.exe
C:\WINDOWS\System32\bcmwltry.exe
C:\Program Files\Microsoft AntiSpyware\gcasServ.exe
C:\WINDO... Read more

A:NOT My Digital Camera.

hi, welcome to TSG.

download ccleaner

http://www.ccleaner.com/
* Install CCleaner
* Launch CCleaner and look in the upper right corner and click on the "Options" button.
* Click "Advanced" and remove the check by "Only delete files in Windows temp folders older than 48 hours".
* Click OK
* Do not run CCleaner yet. You will run it later in safe mode.

Download the pocket killbox

http://www.bleepingcomputer.com/files/killbox.php
* Download the trial version of Ewido Security Suite here
http://www.ewido.net/en/

* Install ewido.
* During the installation, under "Additional Options" uncheck "Install background guard" and "Install scan via context menu".
* Launch ewido
* It will prompt you to update click the OK button and it will go to the main screen
* On the left side of the main screen click update
* Click on Start and let it update.
* DO NOT run a scan yet. You will do that later in safe mode.

* Click here for info on how to boot to safe mode if you don't already know
how.
How to boot to safe mode

http://service1.symantec.com/SUPPOR...2001052409420406?OpenDocument&src=sec_doc_nam
* Now copy these instructions to notepad and save them to your desktop. You
will need them to refer to in safe mode.
* Restart your computer into safe mode now. Perform the following steps in
safe mode:

* Run Ewido:

* Click on scanner
* Click Complete System Scan and the scan will begin.
* During the s... Read more

Read other 1 answers
RELEVANCY SCORE 52.4

I am considering 2 camera's. Each one having a difference in Meg's and Zoom.

Kodak 12 mp with 5x zoom
Pentax 8 mp with 7 internal zoom

Kodak sales team outstandingly claims that undoubtedly 12 mp's are utmost important and no one has 12 like them and their's is the BEST.

Pentax claims that it's all in the zoom.

So, am I better off with which one.
The photo's taken shown by the sales team do look better with the kodak. I have a kodak now, 5 mp.

So who's right and which is better?
thanks
 

A:Digital Camera

Read other 13 answers
RELEVANCY SCORE 52.4

I have an concord eye q duo LCD camera and I use windows 98. It has a usb connection. I can't get my pictures to load on the computer. I get an error message twain t009. I also tried to use iphoto but get an error message twain t020. It was working a while back but I haven't used it for a while. I tried to clean some stuff off my computer and I don't know if I deleted something I need or not. I have tried to uninstalling and reinstalling camera, but that didn't help. I don't know a lot about drivers and twains and stuff like that. Is there any help you can give me? Thanks
 

A:Digital Camera

Do you have a scanner installed or did you??

the error means you missing the file twain_32.dll and copy to your Windows Folder. [T039]"

http://www.dll-files.com/dllindex/dll-files.shtml?twain_32

or go start>run type scanreg /fix if it finds errors it will ask you for the O/S disk so have it handy if you have it
 

Read other 3 answers
RELEVANCY SCORE 52.4

Hi!! Not really new here, just have not been on in forever!! My problem is, I have an Optimus Digital Camera. Up until about a week ago or so I had no problems with it. All I do is plug the USB cord into my camera then the other end into the USB port, and a menu would pop up and ask what I wanted to do--- publish to website, view as slide show, save to computer, etc.
Now when I plug camera in, I chhose disk drive on the camera, it says "connected to computer" then the mouse flashes an hourglass icon-- then nothing... I have re-installed the software a million time now and can not figure it out for the life of me. I recently had my virus program updated-- could that be part of it? It is anew computer, so I really do not think it is the USB port. I really feel it is something so simple that I need to just change a setting or something. Can anyone help me??

Thanks in advance!

A:digital camera help

Worth a look: http://www.tips4pc.com/Articles/Digital%20...c_scanner_a.htmLouis

Read other 1 answers
RELEVANCY SCORE 52.4

I'm going to be in the market for a new digital camera very soon. Is it ok for me to post here and ask for a recommendation for one? If it's not appropriate here,any suggestions for where it would?
 

A:new digital camera

Read other 16 answers
RELEVANCY SCORE 52.4

I have an UMAX AstraCam 1000 which worked great when I had Win 98. Now I have a new CPU with Win XP and I can't install the camera. The msg basically says its the wrong op sys. I realize that UMAX should have the solution but they have not answer my emails. Have any Ideas?
 

A:digital camera

Normally this is a driver problem.Your instructions should tell you the Umax internet site for tech support.Go there and determine if there is an XP driver for your camera or,worst case,maybe your camera is not XP compatible
 

Read other 2 answers
RELEVANCY SCORE 52.4

I have a Xony Cybershot, about 3 years old. I take pictures and then view them on my computer or send them via e-mail. I have been doing this for 2 1/2 years. Suddenly, today I took a couple of shots at home and came in to view them on my computer and it acts as if it does not read them. Nothing appears????
 

A:digital camera

Do you mean Sony Cybershot ?

How long since the memory was formatted ?
If you have all the photos on the cameras memory backed up you could try a format, but be aware this will wipe the memory clean.
 

Read other 3 answers
RELEVANCY SCORE 52.4

i bought a a520 polaroid camera.pink 5.0 mp 4x zoom ...this camera is a used camera.everytime i take a picture it storage the photo in the internal memory.the sd cards works on other cameras but does not on mine.ive tried everything.i know there must be a setting on the menu to switch to sd memory but cant find it.can some one help me please....
thanks
 

A:digital camera

hi, usually it's in 'menu' then 'setup'. It would then say something like 'internal' and 'auto', select 'auto'.

That's the best I can do, not knowing the menus of that camera.

PP
 

Read other 2 answers
RELEVANCY SCORE 52.4

Ok...I am in serious need of instructions on how to take a picture with an Olympus Camedia E-20n.

I am in the middle of installing a wireless modem on a laptop and the support guy wants me to take a picture of the motherboard.

This is my bosses camera and he is not here. No instructions and website is no help.

Can anyone help me please? Just need one picture.
 

A:How to use digital camera

Since I couldn't delete this post (tried) I just want everyone to know I figured it out. This is a huge camera with tons of settings for a professional...which I'm not. But I finally figured it out. Now to download them!!
 

Read other 3 answers
RELEVANCY SCORE 52.4

I have a Sony digital camera that I used on a system with XP os. When connected with the usb cord and the camera turned on the pc would recognize the camera and open the pictures options automatically, allowing me to send them all or some to a folder of my choice.
I am now using a pc with 98 os and I have to open the camera system from the my computer/ removable disk F and put the pictures one by one into the folder of choice.
The same software was installed as was on XP.
I guess I'm asking if this was a feature in XP that is not in 98? And if so do I have any options to get this in 98?
Once again, thanks for any advice and hints you send my way.

 

A:Digital camera

Read other 8 answers
RELEVANCY SCORE 52.4

I have an Olympus digital camera, it came with Camedia Master 1.1. I also have Adobe Photo Deluxe 2.0 and 3.0, and Microsoft Picture It Express 2.0.
My problem is how to print more than one photo per photo paper.
Right now say I wanted to print one of the pictures I downloaded from the camera. I would choose my size and make any adjustments
(red eye etc.)then click print. It prints the photo right in the middle of the paper thus wasting a lot of paper if you are only printing a 3X5 picture. Is there any software out there so you can print more than one photo (not the same photo twice but different photos) on the same paper?
Any help is appreciated.
 

A:digital camera

Going by memory here but in Adobe Photo Deluxe (3.0) you need to go to Advanced/Size/Canvas Size. Set the canvas size at 8.5 x 11. Then click the square where you wish the first photo to be placed. Then drag your other photos on to the canvas one at a time resizing them with the size handles as necessary. Right click and drag them into position. You can preview your layout before print. I usually get a warning that the image is too large for the canvas. If the print preview looks good I just ignore this and give the go ahead to print. HTH

[This message has been edited by leem (edited 02-07-2001).]
 

Read other 2 answers
RELEVANCY SCORE 52.4

My son gave me his old digital camera, a HP Photosmart 425. He didn't have any of the software that came with it. I looked on the HP website to download the drivers. What I was wondering if I could use any other kind of imaging software, or do I have to use the HP software that came with the camera. Thanks.
 

A:Hp digital camera

Read other 16 answers