Over 1 million tech questions and answers.

Technical Error with Graphics Card

Q: Technical Error with Graphics Card

Hi, I'm wondering what is wrong with my computer.

When I play a game ( World of Warcraft ) or few others, I get a message or something thats on my monitor that says
"Out of Range" Set monitor resolution lower or read the manual guide.

When I'm in the game it works fine, but then it all freezes and I got that message and it kept happening a few other times
maybe after 30 mins of playing or so.

I'm wondering why I get this message and the specs are below if needed.

Specs:

Computer - Compaq Presario 5108 US or 5000 series

Motherboard - Via

Processor - AMD Athlon 1.2 GHz

Memory - 384 RAM

Graphics Card - Radeon X1300/X1550 series
If you need anything else listed please tell me.

Thanks.

RELEVANCY SCORE 200
Preferred Solution: Technical Error with Graphics Card

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Technical Error with Graphics Card

You max out the video display of both your video card or the monitor. You would have to use a lower setting. Don't max the settings otherwise you'll get this error..

Read other 4 answers
RELEVANCY SCORE 55.6

ASUS GT240 graphics card "ERROR CAN NOT FIND GRAPHICS CARD" Can anyone help me with this error message? I can hear the windows startup sound but it shows no display so i plugged the cable into the motherboad and an error box opend wich stated "ERROR CAN NOT FIND GRAPHICS CARD" with no additional information. I searched online and found that asus smart doctor can cause this and they recommend that you uninstall and reinstall the drivers to fix this problem but the pc is not picking up the graphics card to reinstall all the needed drivers. I also found people with the same problem and after they did a clean install of windows7/vista and all the drivers the error box still appeared. Does anyone know how to resolve this problem? Your help will be greatly appreciated.

A:ASUS GT240 graphics card "ERROR CAN NOT FIND GRAPHICS CARD"

Do you have the PCIe set as first to initialize in the BIOS? Also, have you tried the card in another slot on the MoBo? Have you tried cleaning out the slot with canned air? Have you tried using a pencil eraser to gently clean the contacts in the GPU where it plugs into the PCIe?

And please, thoroughly fill out your System Specs by clicking on the tab under your post.

Read other 9 answers
RELEVANCY SCORE 51.2

Hey guys, i want to thank you ahead of time for helping me.

This BSOD is a pain in the butt.

Intel Pentium 2.8GHZ
RAM 3.5
32 bit OS
Intel GG965 Express Chipset Family

I have already reinstalled the operating system multiple times, i think its a faulty graphics card, but i want to be 100% sure before i go and shell out the $$ for a new one

Please help The blue screen error points to igdkmd32.sys & it also says GRAPHICS_DRIVER_TDR_FAULT

A:BSOD error.. Restarts, but power button stays on, graphics card error?

STOP 0x00000116: VIDEO_TDR_ERROR (go to top of page)

Usual causes: Video driver, overheating, bad video card, ?BIOS, ?Power to card (see Significant Posts section below)

http://www.carrona.org/bsodindx.html#0x00000116

Incase you have overclocked your GPU reset it to the default.
Update your graphics driver to the latest stable version

Read other 1 answers
RELEVANCY SCORE 50.4

I'm looking at 2-Gig SD cards. The most taxing use for this card will be to store and play back videos in 320x resolution on a Palm TX. My concern is that these videos be played back with no hesitations so the performance speed-wise is important.

Of course, I am concerned about price, too; the prices I've found range from as low as about $50 to as high as $250--quite a range.

Here are the cards I'm looking at. Does anyone have advice for me and does anyone have any first-hand experience they can relay to me that might help:

PNY at $50

Corsair at $68

Patriot at $78

Edge Tech at $81

Transcend at $85

Usually, I buy only name-brand stuff. I like the compatibility and reliability Crucial has give me over the last five years; but, the prices of these SD cards from NewEgg are very tempting. Crucial wants about double the above prices for the same size card.
 

A:Need Technical Advice on SD Card

Look here too.

http://www.lexar.com/digfilm/index.html

Your see there are many types of CompactFlash cards.
Professional Cards
Platinum Cards
CompactFlash Cards

The Professional Cards only work for some camers. So check to make sure a higher speed card will work for you.

I know I got me a faster SD card last year for my nikon coolpix and the speed is I think 3 times faster then what was out a year or so before that went I got my camera. Really helps in taking pictures to have a faster card.

I like the lexar or you can get the Ritz carmera cards too but they are still made by lexar.

But as you can see there is more then brand and size but also speed and if your going to do video i would think getting the faster speed card you can get that works on your camera would be best.
 

Read other 2 answers
RELEVANCY SCORE 49.6

I've been playing the same games for a long time on my dimension e310 desktop. recently however the games that have run fine before are doing things like show white squares where buttons are and not displaying interactive content. is my graphics card corrupt or damaged or is it simply time to get a quad core with a x16 pci express port?
 

A:Graphics card error?

Which card are you using? Have you recently updated your graphics drivers?
 

Read other 4 answers
RELEVANCY SCORE 49.6

I had previously made a thread, but since its dead now, i had to make a new one.=]

Anyhow.
I cannot really rely on my current graphics card, as it does not really give out good performance on games like Counter-Strike: Source.
On my previous thread, a person told me to get this G Card from Newegg, but since i am from "Australia", it was not possible.

So i found this Australian Website which sells Graphics Cards, and I'm having trouble picking the G Card that wood have the best performance for gaming.

Here is the link of the website:

http://www.myshopping.com.au/PT--72_Graphics_Cards

What I'm aiming for is a card with 512mb of Video memory, AGP, 128-bit and a price range of 0-100 AU dollars.

Processor Information:
Vendor: GenuineIntel
Speed: 2800 Mhz
1 logical processor
1 physical processor
HyperThreading: Unsupported
FCMOV: Supported
SSE2: Supported

Network Information:
Network Speed:

Windows Version:
Windows XP (32 bit)
NTFS: Supported

Video Card:
Driver: NVIDIA GeForce FX 5200
DirectX Driver Name: nv4_disp.dll
Driver Version: 6.14.11.7519
DirectX Driver Version: 6.14.11.7519
Driver Date: 16 May 2008
Desktop Color Depth: 32 bits per pixel
Monitor Refresh Rate: 72 Hz
DirectX Card: NVIDIA GeForce FX 5200
VendorID: 0x10de
DeviceID: 0x322
Number of Monitors: 1
Number of Logical Video Cards: 1
No SLI or Crossfire Detected
Prim... Read more

A:Graphics Card Error

Read the games requirements.
I recommend ATI cards.
Do you have more than 1 Firewall protection ?
If so disable Windows.It's explained there.
 

Read other 1 answers
RELEVANCY SCORE 49.6

Hi guys,

My machine has been playing up lately. It has started to be very slow of late and now and again it just restarts itself. I did get an error last time this happened which was:

"The driver for the display devive was unable to complete a drawing operation. Please check with the device manufacturer for a driver update.

The display driver for NVIDIA RIVA TNT2 Model 64 seems to be responsible for the system instability."

Ive had my machine ages and never had a problem with this card or the drivers for it, does anybody know what i can do about this and where i could get any driver updates i need?

Thanks
 

A:Graphics card error?

Go here

http://nvidia.com/content/drivers/drivers.asp

Choose the right options for you card and download the driver.
 

Read other 3 answers
RELEVANCY SCORE 49.6

I have a Nvidia geforce FX 5600 graphics card... It has been working fine with my computer up until a month ago and it keeps getting worse. At first in games the graphics would completely mess up and now I can't even start my computer with the card pluged in.
If I have the card pluged in my mouse, keyboard and screen aren't read... and nothing starts up. If i pop out the card then everything starts up fine. Sometime it still works with the graphics card, but it takes up to 10 restarts for the computer to read the screen.
What could be the problem?
Is the card just fried?
Time for a new card?

P.S the fan also stoped spinning on the card. If that is any indication of anything.
 

A:Graphics card error

I have a 5200 card/ try going to the GForce web and see if there is an update for the driver.
 

Read other 2 answers
RELEVANCY SCORE 49.6

Almost every time I start World of Warcraft my game freezes and this message pops up"Application Wow-64.exe has been blocked from accessing Graphics hardware" why does this happen and how do I fix it? Btw it's a brand new home built computer windows 10, gtx1060, i5 6400, 8gb of ram
 

Read other answers
RELEVANCY SCORE 49.6

hey.
first off my cpu turns on but doesnt boot with my 8600gt inside, just the fans run at full speed. when i put my old gfx card 7300se in it works perfectly fine.
i've put it down to being a faulty 8600gt, ive tried everything- cleaned everything - turned system temp gage off, nothing works, im wondering is it the card itself or can i modify summat to make it work?
ive had th 8600 2 years - not OC.
thanks.
 

A:Graphics card error

Problem solved - 1 of my ram sticks died, therefor i replaced it and it works perfectly =)
 

Read other 1 answers
RELEVANCY SCORE 49.6

Hello. 2 weeks ago or so, I had this annoying error with my graphcis card.
https://www.youtube.com/watch?v=gi9VDNOIUsw In this youtube video you can see the problem. This is a problem that happens in all the games I play.

I am using:
Windows 7 Home Premium
GeForce GTX 560
Intel Core i7-2600 3.40GHz
Power Supply Corsair GS700

Could it be that my graphics card is dying?
 

A:Graphics card error

I've not seen that exact error before. But those type of issues are typically the result of a faulty video card or power supply.
 

Read other 1 answers
RELEVANCY SCORE 49.6

guys when my graphics card is fixed into my computer my computer does not boot.it shows shows a black screen and immediately shuts down.what is the problem?my computer or my graphics card

A:graphics card error

Post the make/model of the PC. If custom built then post the specs.

MB-CPU-RAM-GPU-PSU brand/wattage

Read other 1 answers
RELEVANCY SCORE 49.6

Hi all,

I've tried adding a PCI Graphics card into my mom's computer. Before that she only had 1 card - a linksys wireless G adapter that was working fine.

After slotting in the graphics pci card, the message "Resource Conflict - PCI Display Controller in Slot 02. Bus: 01, Device: 09, Function: 00" appeared.

I looked high and low in the BIOS settings page to set IRQ values but there was no such area tat I could do that.

The BIOS is a Phoenix 4.0 Release 6.0.A

Any idea how I can resolve this problem?
 

A:PCI Graphics Card - IRQ Error

Read other 6 answers
RELEVANCY SCORE 49.6

Hi guys,

Motherboard asrock m3a ucc on windows 7
Using a range of cards. Nvidia 8400gs, nvidia 210,nvidia 640

The problem:
The card works using the standard vga adapter driver that windows uses, but as soon as the official nvidia driver is installed the card gets a error 43 in device manager. I have tried using several cards and they all do the same thing. I have also tried a removing all drivers and reinstalling an older official driver which gave the same result.

Also tried multiple fresh installs of windows

Also the cards work in other machines, the issue seems to be either the motherboard or a driver issue, its just odd that the card displays no errors using windows standard vga adapter driver.

Any ideas?

Cheers
 

A:Graphics card error 43

what are you running
video card brand and model
cpu
m/board
ram
power supply
brand
model
wattage

check the listings in the bios for 12v line voltages and cpu temperatures and post them
 

Read other 1 answers
RELEVANCY SCORE 49.6

I have recently built a machine using the Winfast 760gxk8mc motherboard.

My problem is that now i have built the machine with Windows XP the machine crashes in windows and upon the reboot a message appears telling me that the graphics card caused the error.

The graphics card is obviously onboard and it an SIS Mirage. I installed the drivers that came with the motherboard and have since tried to download some othe drivers but i fear these are the same drivers that i already have.

Does anybody have any ideas for me as the last resort is to take the board back stating the onboard card is faulty.
 

A:Graphics Card error

Read other 7 answers
RELEVANCY SCORE 49.2

Got any suggestions on what could be wrong with my memory card when it won't read the data when it's plugged in?
It says "No Data"
The card is official. I've tried other slots. Other mem cards work, tried turning it off and on, etc. We have a hunch that the problem could be that the contacts on the memory card have been misalligned, however there is no damage we can see without taking it apart.
Is it possible to take it apart or are there rivets or anything in the back end of the memory card that would hold it together?
Any help would be much appreciated. Thanks.
 

A:Question regarding PS2 Memory Card technical difficulties

Try it and see, get a screwdriver, and see if you can pry the case open. I have no idea if it will work, but if it doesn't work, then you've got nothing to lose by trying to get it open.
 

Read other 3 answers
RELEVANCY SCORE 49.2

Hey everyone,

I'm running a dell studio 1737 with an intel core2 duo cpu P8400 @ 2.26 GHz 2.27GHz at 2GB ram.

And im using an ATI Mobility Radeon HD 3650 Graphics driver.

For a while now (about 1.5-2 months) there's been a problem with my display - its not a huge issue but I'm worried about what it might turn into and to be honest it's a bit irritating. For one thing, the taskbar is semi-opaque when it should be fully black, and additionally, the google desktop button(embedded in the taskbar) has bold, almost doubled over looking letters. Also, I'm not quite sure why, but often application windows such as firefox, if not in full screen, can appear behind the taskbar, aligning with the bottom of the computer screen(this often happens after i take my computer out of sleep or hybernate mode if i had a window open beforehand), though if i maximize that window, the bottom of the application window will align with the top of the taskbar and the taskbar itself will return to full opacity, as if nothings wrong (see pictures). I at first did a system restore soon after the problem started, which did in fact fix the problem, but as soon as windows would update, the issue would return, so i figured it was a compatibility issue that windows would address in a future update, and has yet to do. The final straw was when i tried to connect a projector to the pc and it didnt register it, when the last time i tried this, before i started having problems, it worked fine. So far, nothing dras... Read more

A:Subtle graphics card error?

that's windows aero working as it should. when you have no apps open or if you have apps open that are not maximized, the taskbar will be transparent. however, whenever you fully maximize a window the taskbar will change from transparent to full opaque.

as far as the google gadgets button, i'm assuming that it changes automatically depending upon what state the taskbar is in--transparent or fully opaque--so that when the taskbar is transparent, you can still make out what the button label reads without difficulty. again, my assumption.

Read other 1 answers
RELEVANCY SCORE 49.2

Hey everyone,
When i try and upgrade my ATI Readon HD 2400 Pro graphics card, it always fails. I have no idea why this happen but none of the updates will work. I posted about this before but i am still clueless
There is an attachment. i am not sure if this has anything to do with it.
THanks,
Ben

A:Weird Graphics card error

Hi Ben,

See if uninstalling the video driver and and reinstalling them can help.

Are you using the latest 32-bit 8.11 version from: Drivers & Tools | GAME.AMD.COM

Read other 9 answers
RELEVANCY SCORE 49.2

Basically long story short about a week ago my computer locked up while playing a video game. Now my computer has constant horizontal red lines/blocks across my screen and it is stuck in a 800x600 resolution. dxdiag is not reading my card and device manager has stopped my video card saying "Windows has stopped this device because it has reported problems. (Code 43)"
I've tried many things such as cleaning the card and case with compressed air, checking its seating, updating drivers, uninstalling reinstalling drivers, you say it ive probobly tried it.
So is my video card dead or is it still alive just put to sleep by a Windows Update that I think caused all this.
(Many people online I see have had a code 43 on their graphics card after a windows update)
Any help would be great!
Thank you
-Kent
 

A:Code 43 Error on Graphics Card. Please help!

Why not attempt a system restore prior to the failure?
 

Read other 3 answers
RELEVANCY SCORE 49.2

Hello everyone,

I just want to know if a graphics card is not working, would it prevent me logging into vista? like there isn't enough graphics to boot vista? is this possible?
Also would a malfunctioning graphics card cause weird symbols in the BIOS, like weird vertical lines, dollar signs replacing spaces, E's replacing F's, A's replacing N's etc.?
Also could a power surge possibly damage the graphics card? in terms of hardware?
I am not asking for a fix here; i just want to know if this can happen

Thank you for your time

A:Does this sound like a graphics card error?

Yes a powersurge can mess with a card, hopefully you have a surge protector.

NO, the BIOS is booted from the mobo, so the card should not mess with it, not in that manner.

It also should not prevent you logging in....

~Lordbob

Read other 5 answers
RELEVANCY SCORE 49.2

Hey there,

So recently I've been debating whether to purchase a Mac desktop or laptop. I was told that if I plan on editing in HD that I should get the macbook pro because of its Intel processor. I was told however, that if I did so, I would have to pay $200 to get a software upgrade for my Final Cut Pro HD to this universal binary version.

So, I made the decision to get an iMac G5 instead. Imagine my surprise when after installing the Final Cut, I was given an error saying that it wouldn't run due to my lack of an "AGP Graphics Card."

I called Apple support and was told that if I did Software Update, it would be fine.

So I ran Software Update and after installing the update for the program, it still didn't work.

So I re-called Apple Support and was told that despite buying a brand new computer, that I would not be able to use Final Cut Pro until I purchased the $200 upgrade which won't even be available til next month.

I have a project due for a client in the next week. Does anyone have any idea where I could get some sort of unofficial patch that would allow me to run my Final Cut Pro HD without the graphics card?

Please let me know.

Thanks.
 

A:Final Cut Pro HD - AGP Graphics Card Error

Anyone?
 

Read other 1 answers
RELEVANCY SCORE 49.2

I recently had a problem with my graphics card and had to replace it. I had an old GeForce 2 and brought a GeForce2 Ultra from a mate who said it had never been used.

Everything appeared to load fine until right at the end when I got the message 'error loading data'. I thought it may be a dodgy card so I brought another which is a GeForce4 440. The same message appears.

I have downloaded all the latest drivers as well as using supplied installation discs but nothing works. Can anyone help me please.

A:Error loading graphics card

Quote:





Originally Posted by frenchman3622


Everything appeared to load fine until right at the end




Right at the end of what?

~GICodeWarrior

Read other 2 answers
RELEVANCY SCORE 49.2

Whenever I try to play certain games, I get a message saying:

"display driver stopped responding but has successfully recovered".

I have an HP Pavillion dvd 6 notebook with i5 CPU, AMD ATI HD 6770M GPU, and 6 GB ram,

I've considered updating the graphics card driver, trying that from device manager (searching for a newer driver), but it claims that there is no better driver than that. Same story on HP's website. That's the best driver, v 8.882.2.3000, by the look of it.

I'm not sure about installing drivers directly from AMD, because that might cause other issues.

I have adequate cooling as far as I can tell -- I use an active chill pad with two big fans on it.

It's funny how it happens with some games or just browsing the internet. Other games it doesn't ever happen.

A:Keep getting the same error message with AMD graphics card

F34R whatever you do DO NOT install driver other than the one found at the manufacturer's site (HP).

Do you have the latest BIOS?
Try uninstalling the device, reboot and then re-installing with the driver from HP.
Have you check for memory errors? Give MemTest a go:

Download the Auto installer for USB.
Boot your system from it, and when MemTest start press c (configuration) and select Full Memory Range, then let it run.

Read other 1 answers
RELEVANCY SCORE 49.2

The past two days now I've been constantly getting distorted horizontal lines across my screen that frequently lead to BSOD, as well as an error message about my video card:

Display driver stopped responding and has recovered
Display driver ATI Radeon Family stopped responding and has successfully recovered.

I've tried reinstalling all the catalyst graphics drivers from 9.3 up to the latest 9.11 (using mobilitymodder for anything past 9.3). I also tried uninstalling everything and letting Win7 find the driver for me but still I get the same problems every time a graphics driver is installed. It's only when I run in safe mode or with no graphics driver installed that there's no problem (except for the screen being huge and no areo).

Is this really a driver problem, or is my video card dying? Any help would be GREATLY appreciated. I'm a student and NEED this laptop to work. I took a screen capture of the information (also attached a .txt file with dump info):

http://yfrog.com/7519753134j

I've run the following:
---------------------
Memtest86 = no errors (on 7+ passes)
Video Memory Stress Test = no errors (on 7+ passes)

SeaTools
----------
S.M.A.R.T. Test: no errors
Short Drive Self Test: no errors
Long Drive Self Test: no errors
Short Generic Test: no errors
Long Generic Test: no errors

I'm not sure what to do at this point. Maybe I didn't install/uninstall the drivers correctly? All I know is this problem started randomly, I didn't install any new hardware/software/up... Read more

A:Graphics Card Error & BSOD

Hi -

Please zip the dumps up along with an msinfo32 NFO file -
START | msinfo32 | save w/ default NFO file ext

Zip all up and attach to your next post

Regards. . .

jcgriff2

.

Read other 5 answers
RELEVANCY SCORE 49.2

Salutations. I recently purchased a Graphics Card to get my gaming into gear a little better, and have found that I might have purchased a Graphics card that some element of my system cannot handle.

I have an Hp Compaq DC5800 MT. I purchased an Nvidia GeForce GT650. I took out my old Graphics card (Did not uninstall old drivers) and I got a beeping Error Code of 6 Beeps (Graphics/Video Error). The computer refused to boot up at all.

I reinstalled my old card, and it started up normally. I shut down again after doing some research (I found only a small amount of info) and I reinstalled the GT 650. I connected the monitor to the Mobo Graphics. Still got the same Error message. (perhaps Onboard graphics are disabled in the BIOS?)

I'm not super good with computers, so I am at best guessing/going off things I've read on various forums.

I guess my questions start with: Should this Graphics card work with my Mobo/Power supply given that I run a DC5800 MT?

If so...what am I doing wrong with the Installation?

Thanks in advance for any info anyone is able to provide!
 

A:Installing new Graphics card, getting Error.

Read other 16 answers
RELEVANCY SCORE 49.2

I am having a code 10 nightmare with my geforce 6200 graphics card.

About a week ago - i kept on getting the BSOD IRQ value not less than or equal to message and found out this to be the result of faulty RAM.

Once I had taken this out - I started getting this code 10 message. It seems to relate to not giving the video card an IRQ address or any other resources and I have no access to display properties. However, when in safe mode - it does assign resources and I can access display properties.

I have tried removing/reinstalling drivers in safe mode, normal mode umpteem times using latest driver versions and also letting windows try it through the found new hardware device.

I have seen suggestions saying to 'assign vga to irq' in bios - but i have no such option (mb = ga-k8nsnxp).

I am going to remove every piece of hardware and try older nvidia driver - will post back soon with results

any help appreciated - this is a nightmare.

cheers
 

A:Code 10 - Graphics Card Error

tried taking out all other hardware in pci slots - didnt work - cant find older drivers for 6200.

I doubt its that anyhow - defo seems to be related to not assigning irq

going to go bang my head off a wall
 

Read other 2 answers
RELEVANCY SCORE 49.2

I need help on something, when i run dxdiag it shows that i have 1011MB of vram, but when i run gpu-z it shows that i have 256MB, so i dont know which one is my real vram , but my graphics card(8400gs) is overclocked from : Core Clock - 451 Mhz, Shader Clock - 1113 Mhz, Memory Clock - 266 Mhz To Core Clock - 690 Mhz, Shader Clock - 1703, Memory Clock - 315 Mhz... Please tell me which one is my real Vram.. tqs

A:Graphics card memory error

Hard to say based only on this information as the 8400gs came in
256
512
and 1024 models.
So both are actually possible.

Dxdiag I know is not always right my old 8800gt nvidia card would often read as having over 2gigs when it only had 512meg.
Overclocking can also confuse things.
Based on the information at hand I can't really say which is right for sure though, they are both possible.

Read other 5 answers
RELEVANCY SCORE 48.8

Hi, I have a EVGA e-GeForce 7600GT 256 MB PCIe Video Card which supports the SLI technology allowing me to link up 2 or more graphics cards for greater performance. Now this card has DDR3 memory. I wanted to know if I can link it up with a DDR2 memory graphics card which also supports SLI. If I can, how will this difference affect performance?
 

A:Linking a DDR2 memory graphics card with DDR3 SLI graphics card?

Now this card has DDR3 memoryClick to expand...

Which card?? "A card with DDR3 memory", or "A thingy with a red switch on it" tell us just as much.
But if it's not another 7600 GT you're trying to SLi, just forget it, especially if you're going to buy the other card.
 

Read other 2 answers
RELEVANCY SCORE 48.8

Hi,

Thank you so much for reading my query. Below are the details. Can you help me?

Running windows XP service pack 2 on a dell inspiron 2600
O2Micro OZ6912 CardBus Controller
and using 4 Port USB 2.0 Hi-Speed Cardbus found at the link below:
http://www.ppa-usa.com/products/pcmcia/1141.htm

When I attempt to connect a microsoft mp3 zune device and a maxtor external hard drive onto this cardbus my system resources max out and my system freezes. Why!? Please help.

A:Non technical female needs help! Cardbus USB card freezes my computer

hello & welcome to TSF,

could you please go to the (device manager) see if you have any (red/yellow ) quotation marks in it

steps
--------

start / select (my computer /bu right clicking it

then select (properties /by left clicking it

then select ( hardware tab

then select ( device manager
now in that windows tool bar select ( veiw / then in the drop down menu select (show all hidden devices )

make a note of these quotation marks & get back to us

Mike

Read other 2 answers
RELEVANCY SCORE 48.8

I don't exactly remember what happened but i was promoted via Steam to update my drivers for my AMD Radeon HD 7800 Series, and after restarting the computer No games would start. I have tried all and nothing loads. One in particular does load but only random letters and code are replaced where the graphics and textures should be. I have tried uninstalling and reinstalling my drivers multiple times and out of few for going to an incorrect sight may have deleted something of importance. Now when I check what graphics card i'm running by going to Advanced settings in screen resolution all it says is Vgasave. I'm not very tech savvy and would appreciate any help on this matter greatly
 

Read other answers
RELEVANCY SCORE 48.8

I got the Sims 3 - No supported graphics card error. I have Nvidia Geforce 8800GTS and running windows XP. This is what I did and it Worked. Here gos this is my frirst so I hope I do it right. Here gose guy, I went to Display Properties. Then Setting and then to Advanced butten. Then the GeForce 880 GTS tab. From there I went tostart NVDIA Cortrol Panel. I went to Manage 3D setting. You will see a Program Setting tab to the right click on it then you will see Feature and Settings under that is the line Antialiasing - Mode this is what you need to change to Application-controlled. Apply This work for me hope it works for all. Thank you all for help
 

Read other answers
RELEVANCY SCORE 48.8

I am getting an error mesage saying the specified driver package was not installed for matching devices. I don'tknow why I am getting thins message as it is the correct driver. I have also noticed that if I go into my device manager all I get is a blank screen could these issues be related?

A:Trying to install my graphics card but getting error message?

This is the message I am getting?

Read other 9 answers
RELEVANCY SCORE 48.8

As i posted not long ago about my RAMs needing to be replaced because of them causing BSOD's on cold boot, well, after about 1 year i never got round to it, so this is what happened.
I booted my pc as always waiting for the BSOD to pop so i can work on it normally, and as it reached the password screen the resolution was probably 600x400! i normally don't bother typing in my password because if i wait a minute or so on the password screen it pops the BSOD and were laughing, but this time the resolution was low.
I'ts done this a couple of times and all i did was use System Restore to go back a day or so and it was fine, but this time there were no system restore points.
I changed the resolution to its highest (1600x1200) and went to Manage Hardware to see that my Graphics card (GeForce 460 GTX) had a yellow triangle next to it and the error code was code:43.
I tried updating its driver, reinstalling its driver, removing and replacing my graphics card but nothing.
I don't think it is a hardware problem because the screen looks fine and works fine at 1600x1200 but the Windows 7 Theme isn't how it used to be(No transparent toolbar etc).
Thanks in advance

P.S If you do manage to help me i promise i will send my RAMs for replacement next week.

A:BSOD and then Graphics card error code:43

Your card is dying. 2D display ie. Windows w/o Aero doesn't mean the card is perfectly fine. My 8800GTS started going crazy like how you have described yet showed the BIOS and windows w/o Aero ok (for a week atleast). I suggest a RMA or atleast trying it on a different PC. Do you have adequate ventilation in your case?

Read other 9 answers
RELEVANCY SCORE 48.8

i only get this BSOD with my R9 290 i just bought i had it replaced with a brand new one and it continues to do the same thing my mobo is up to date i re installed the drivers on it and fresh install on windows 7. its not heat related temps are 65 degrees when gaming. i really just need verification on what exactly is wrong with my card through BSOD readings of the code or maybe someone can clarify its a defective card which i would be shocked because i just got it replaced like i said for the same issue. also its not a power issue or CPU issue.

Specs:
FX 8350 8 core 4.0ghz
XFX radeon r9 290 4gb
G.Skill 8gb ram
XFX 850w psu
1tb hard drive
mobo: M5A78L-MLX PLUS

A:new R9 290 graphics card BSOD code error 124

That is a hardware bugcheck.

Are you still receiving them?

Read other 1 answers
RELEVANCY SCORE 48.8

So, recently i downloaded the latest Catalyst Driver (14.12) from the AMD website Desktop But after installing it and rebooted my PC, my monitor's resolution became smaller (like 800x600 something) and an error showed up "No AMD graphics driver installed or the AMD driver is not functioning properly. Please install the AMD driver appropriate for your AMD hardware" . So what i did is completely removed my AMD drivers and it went back to the original resolution (1920x1080) but now i don't have any AMD drivers installed, what should i do? if i reinstall the driver again it will go back and show the error again. Thanks in advance

A:AMD Graphics Card is not functioning properly error

Click the link below then follow the instructions:

Drivers - Clean Left over Files after Uninstalling

Then re-install the driver again.

Read other 6 answers
RELEVANCY SCORE 48.8

I have a ATI/AMD Graphics Card on my Dell Studio 1558, and the chip has become faulty (design fault from manufacturer). Now the screen display is black and does not come on.

Temporary workaround I am using
I plugged in my separate VGA monitor to the laptop and using it, I switched on my laptop, and after the Windows startup logo, the computer would crash and restart (and repeat).

So I managed to get into Safe Mode, and from there, under Device Manager, I roll-backed my ATI/AMD driver to Microsoft Basic Display Adapter. Then I restarted the Laptop normally (not Safe Mode), and the laptop DID NOT crash, it made it to the logon screen and I got in.

Problem:

So now, I have my VGA Monitor plugged in to the laptop and using it, I am able to boot up windows normally.

While the laptop is on, if I unplug the monitor, the Laptop Screen stays black, nothing happens. When I plug it back in, I get this error that says Microsoft Basic Display Adapter is not compatible with your display (I'm assuming it means my laptop screen since it's a Full HD resolution, whereas my VGA monitor is half that resolution.

What I need help with

Is there any other driver I can install apart from ATI/AMD which will allow my Laptop Screen to work? I want to bypass the ATI/AMD Graphics card completely as it's faulty and maybe somehow use Windows one just like the Microsoft Basic Display Adapter is currently doing?

UPDATE: I do not mind using a smaller resolution on my Laptop Screen. I can learn to live... Read more

A:ATI/AMD Graphics Card error, black screen

I don't think a different driver would help with the laptop's screen. It sounds like a hardware problem, especially if, as you say, the chip has gone bad. It looks like the problem exists somewhere between the video card and the laptop screen, but it still allows you to use an external monitor.

You could boot without the external monitor and shine a light on the laptop's screen to see if there is anything there. If there is, that rules out the graphics card. It would be the actual screen backlight that is at fault.

Is there any chance that this laptop is still under warranty?

Read other 3 answers
RELEVANCY SCORE 48.8

Hello all,

I'm not sure if this question has been asked and answered quite yet, but I could not find it anywhere on the forums, and since each case is slightly different due to different system set ups, I figured I'd go ahead and throw this out there.

Every time I try and run The Sims 3, I repeatedly get the same error message over and over again:
"Unable to start game

Device 0 cannot run this title.
No supported video graphics card detected. Please check your system hardware."

I don't know why I am getting this message since when I built this computer I put an Nvidia 9800GTX in it, and that card is most definitely supported by the game. I have tried all sorts of solutions such as updating my video drivers (which I have done twice now since Nvidia released another new driver on the 18th), updating DirectX, changing my monitor's screen resolution, going in to the task manager and ending all non-essential tasks to see if there was a process interfering with the game, etc... I even emailed EA customer support to ask them if there was a solution, and they gave me what seemed like a copy-and-paste response email with a bunch of solutions that I had already tried or ones that didn't work, which indicated to me they never actually read what I wrote to them. It makes me wonder why they even asked for a DxDiag file from me. Anyway, I'm including a DxDiag printout along with my post here, so if anyone out there reads this and has some sort of... Read more

A:Sims 3 - No supported graphics card error

Read other 16 answers
RELEVANCY SCORE 48.8

Hey, I've recently tried to install a new graphics card into a Dell Dimension 9200 pc. However, after booting up it went straight to the bios saying that there was an error with the raid drive. I have no idea how this has happened and what to do. The error isn't being given, it just says error occured.

I tried putting the old card back in but the same thing has happened. Before i installed i didnt shutdown the pc properly and was wondering if that could have caused the problem?

The harddrive in question is a samsung sp2504c

Cheers.
 

A:Raid error since installing new graphics card

Before i installed i didnt shutdown the pc properly and was wondering if that could have caused the problem?Click to expand...

Yes, it is never a good idea to do that.
Check to see if you have the Intel Matrix Storage Manager software installed, it should be in the Start> All Programs group, if so launch it, the specific error should be in there, you may have to poke around in the software to find it.

If it is not installed, get it here and install it.

http://support.dell.com/support/dow...typeid=-1&dateid=-1&formatid=-1&fileid=211961

Most likely the error has corrected itself.

.

.
 

Read other 2 answers
RELEVANCY SCORE 48.8

I recently got a HP Pavillion zd8000 which had Windows XP installed on it.

I installed windows 7 on it and had the graphics card problems where the screen wouldnt display anything.

I followed the directions for MObility Modder and the laptop worked fine.

Then a couple days ago, it would start up, show the login screen for about 5 seconds, then black out. i would hear the windows login noise but nothing would happen.

i experimented with it and found if i disconnected all power from the computer for about 10 seconds, then recconected it and started it up it would work

this is very annoying because i cant put the computer in sleep and would like to have it fixed

A:HP Pavillion zd8000 Graphics Card Error

Whenever I get any unexplained problems I normally try a power shutdown then go to the AMD site (for mine) and download the chipset drivers.

Don't know if a similar procedure would work for you (?)

Read other 4 answers
RELEVANCY SCORE 48.8

I posted about my problem earlier in the Vista forum, because I thought that it was a problem with Vista or my Graphics card and not a malware issue. The person who responded to me first suggested that I check my computer for malware and something popped up. So I thought it could perhaps better be addressed in this forum. Below is a summary of my problem, my HijackThis log and my MalwareBytes log. Thanks in advance for any help you can give me.

I am running Windows Vista Ultimate SP1 32-bit on a Dell Inspiron E1505 (laptop) with 2 Gigs of RAM
My video card is an ATI Mobility Raedon X1400.

I had not restarted my computer in a while, so yesterday I decided to restart it. I think I may have left my USB webcam plugged in while restarting, but that's never been a problem before. When my computer restarted, I received this error message:

PCMService.exe entry point not found
The procedure entry point OsThunkD3dContextDestroyAll could not be located in the dynamic link library d3d8thk.dll

I noticed that aero was no longer working and I was back to windows basic. I also noticed that I hadn't done a windows update in a while, so I figured that might be the problem. I did a windows update and still no go. At this point I thought the problem was just with aero.

After searching around on the internet for a little while, I tried some things to get aero to work, like fiddling with the settings, uninstalling my java update and reinstalling it, and running the microsoft tool fo... Read more

A:Vista, Graphics Card, .dll error, and malware?

I deleted the malware that showed up in Malwarebytes' Anti-Malware. The new scan I did came up clean, but I am still getting the .dll error and the associated problems on my computer. Here is my Anti-Malware log and a fresh HijackThis log. Thanks again.

Malwarebytes' Anti-Malware 1.44
Database version: 3800
Windows 6.0.6001 Service Pack 1
Internet Explorer 7.0.6001.18000

2/28/2010 8:15:27 PM
mbam-log-2010-02-28 (20-15-27).txt

Scan type: Full Scan (C:\|D:\|)
Objects scanned: 395859
Time elapsed: 3 hour(s), 39 minute(s), 15 second(s)

Memory Processes Infected: 0
Memory Modules Infected: 0
Registry Keys Infected: 0
Registry Values Infected: 0
Registry Data Items Infected: 0
Folders Infected: 0
Files Infected: 0

Memory Processes Infected:
(No malicious items detected)

Memory Modules Infected:
(No malicious items detected)

Registry Keys Infected:
(No malicious items detected)

Registry Values Infected:
(No malicious items detected)

Registry Data Items Infected:
(No malicious items detected)

Folders Infected:
(No malicious items detected)

Files Infected:
(No malicious items detected)

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 4:33:43 PM, on 2/28/2010
Platform: Windows Vista SP1 (WinNT 6.00.1905)
MSIE: Internet Explorer v7.00 (7.00.6001.18385)
Boot mode: Normal

Running processes:
C:\Windows\system32\taskeng.exe
C:\Windows\Explorer.EXE
C:\Windows\system32\Dwm.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\Windows\System32\WLTRAY.EXE
C:\Progra... Read more

Read other 3 answers
RELEVANCY SCORE 48.8

Well I was updateig my cpu with the latest video card update on nvdia GeForce, but when i got the the real install screen i got this error.

Error Code: -5005 : 0x8000ffff
Error Information:
>Kernel\KernelMedia.cpp (95)
>SetupNew\setup.cpp (836)
PAPP:
PVENDOR:
PGUID:
$14.0.0.162
@Windows Vista Service Pack 2 (6002) Non IE/Netscape 12296.246

Can you tell me why this happened and how i fix it? thanks
 

Read other answers
RELEVANCY SCORE 48.8

Anytime am browsing the internet or playing video online, my laptop will suddenly display, Your System graphics has stopn working and has recovered, but the most annoying part is that the system is going to hand for like a minute before it will display the error at the right bottom bar of the system. am running a system with 1 terabytes hard disk and 8gb of ram with 4gb graphics memory.

Please what could have cause this?

Read other answers
RELEVANCY SCORE 48.8

Hello,

I have a DELL OPTIPLEX GX620 with a 500GIG blank graphics card and Radeon graphics card.

After booting the PC, it shows this message on the screen: 113-B27602-112 RV610 GDDR2_32Mx16 64bi

After taking some research my first clue is that something is wrong with the graphics card.

I don't know what is going on but I want to be able to install XP but before that I want to know what is going on and how to solve it.

Thank you
 

Read other answers
RELEVANCY SCORE 48

So, like the title says, I installed a new graphics card (MSI N670 PE 2GD5/OC) and since then my computer has been very unstable and is crashing a lot. The card is factory overclocked and I think it is faulty. Do you know of a way to underclock the card, so I can test if it is the overclock?


PSU: Enermax EMG700AWT

*edit*

So I used Afterburner to set my core clock to -104 and my power limit to 72% and this causes my card to boost to about 980MHz. With these settings the crashing has stopped. So the card cannot be used with the factory OC settings. So should I RMA?

A:BSOD after installing new Graphics Card, error 0x000000101

Hello theone320.

► As far as I am seeing, you are not overclocking.

Code:
kd> !sysinfo cpuspeed
CPUID: "Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz"
MaxSpeed: 2670
CurrentSpeed: 2666
► Your dumps say stop 0x101, hardware related. Mostly CPU is the guilty for it.
Hardware - Stress Test With Prime95

► Test the graphics card, too!
Video Card - Stress Test with Furmark

► Another one generates 0x9C, which is just similar to 0x124.
Follow the suggestions, thoroughly: Stop 0x124 - what it means and what to try

► Are you still using IE8? Better you shift to IE9.

▼ But, the first option would be, ask the vendor to check the graphics card, and if it is faulty, get a replacement.

Read other 3 answers
RELEVANCY SCORE 48

Hi. We are currently having problems after upgrading 3 laptops to Windows 10 Enterprise (clean install).All the 3 models are Elitebook 850 G1 with Intel and AMD graphics cards, notebook has modelnr: H5G42EA#ABN. When the laptop booted from a HP 2013 ultraslim docking the Intel graphics card is reporting error 43, which means that when the user moves the laptop out of the docking station the monitor on the laptop is blank.I noticed today if I boot the laptop out of the docking there is no error with the graphics card (no error 43). I have tried uninstalling both graphic cards, installing the newest drivers from HP, from intel and AMD, tried older drivers from HP but no matter what we try it still boots with error 43 in the docking. Any suggestions for this error? RegardsAleksanderIT Consultant

Read other answers
RELEVANCY SCORE 48

Hi all,

I'm having an issue where I get a random BSOD. I was wondering if you could point me in the direction of how to fix it. Thanks!!

Here is the error report:

Log Name: Application
Source: Windows Error Reporting
Date: 4/21/2014 5:13:41 PM
Event ID: 1001
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: Jeremy-PC
Description:
Fault bucket X64_0x1E_c0000005_R_USBPORT!USBPORT_Core_iCompleteDoneTransfer+45f, type 0
Event Name: BlueScreen
Response: Not available
Cab Id: 0

Problem signature:
P1:
P2:
P3:
P4:
P5:
P6:
P7:
P8:
P9:
P10:

Attached files:
C:\Windows\Minidump\042114-18252-01.dmp
C:\Users\Jeremy\AppData\Local\Temp\WER-77704-0.sysdata.xml
C:\Users\Jeremy\AppData\Local\Temp\WERFDFD.tmp.WERInternalMetadata.xml

These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Kernel_0_0_cab_06cf2ab7

Analysis symbol: X64_0x1E_c0000005_R_USBPORT!USBPORT_Core_iCompleteDoneTransfer+45f
Rechecking for solution: 0
Report Id: 042114-18252-01
Report Status: 0
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Error Reporting" />
<EventID Qualifiers="0">1001</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
... Read more

A:BSOD possible graphics card issue? error 0x1E

Hello Atzp5,

To better assist you, please follow the Blue Screen of Death (BSOD) Posting Instructions so we can get the correct files to better help with the BSOD.

-Gamer

Read other 1 answers