Over 1 million tech questions and answers.

Solved: connect Speedtouch 510V6 with Belkin belkin f5d8231

Q: Solved: connect Speedtouch 510V6 with Belkin belkin f5d8231

Hi Guys i am trying to setup my Broadband connection. i read the whole 510v6 manual but was not able to find how can i set the 510 v6 modem into bridge mode. Please help me.

RELEVANCY SCORE 200
Preferred Solution: Solved: connect Speedtouch 510V6 with Belkin belkin f5d8231

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Solved: connect Speedtouch 510V6 with Belkin belkin f5d8231

Read other 7 answers
RELEVANCY SCORE 108.8

hi i have a problem, my belkin n1 router it no longer has the wireless light or security on, ive set up the router on my Windows 7 pc, both using the manual setup and cd set up but i cannot get the wireless to work, connected direct via a cable i can search the web with no problems, but my laptop cannot pick up the router at all, i have virgin media uk as my isp, my modem is a webstar,

ive attached my setup page info i f needed.

pls help thank you
 

A:Belkin N1 router f5d8231-4 v2 no wireless light or connection

Read other 7 answers
RELEVANCY SCORE 104

Hi guys i and my friend are trying to setup the speedtouch 510V6 modem.
i am on the Web interface page i cannot understand what else to do. The internet light on the modem is not on.i tried going through the manual but cannot understand any thing.PLease help
 

A:Solved: Set up for Speedtouch 510v6

Read other 14 answers
RELEVANCY SCORE 98.4

Good day people of Tech Guy forums.

First of all, thanks for reading this thread and taking it seriously. It is very much appreciated.
I have never been able to forward my ports correctly, It is so frustrating.
I own two routers:

Belkin F5D9230-4 v5000 (accessed by 192.168.2.1)
THOMSON SpeedTouch 780 (accessed by speedtouch.lan)

I dont know what is wrong, but I am sure that i'm setting the right ports but when I check on sites like canyouseemee.org, it never says my port is open.
I have tried almost anything, some people say i'm forwarding wrong, some people say that it is a problem with IP adresses.
Im stuck on this one.

Also, I own an Xbox 360 and Xbox Live.
I play Modern Warfare 2 alot, but cant seem to set my NAT settings to OPEN.
This is also because of the port forwarding that I cant do.

If someone could help me, that would be awesome.

Thanks in advance,
Jarno.
 

A:Belkin and Speedtouch Forwarding

Read other 10 answers
RELEVANCY SCORE 96

Hi everyone. I have recently bought a Belkin N1 wireless router (http://www.dabs.com/ProductView.asp...avigationKey=11177,4294959958,50909&InMerch=1)

I have a TalkTalk Speedtouch 330 modem (http://www.broadbandbuyer.co.uk/Shop/ShopDetail.asp?ProductID=665)

I realise now after buying the router that it is a Cable/DSL router and doesn't work with my Speedtouch 330 modem.

If I buy a new modem with an RJ45 port I think that it will work although I am not entirely sure.

What should I do?

Thanks in advance ;-)
 

A:Belkin N1 wireless router and Speedtouch 330 modem.

It should work, I have the N1 and when its working its very good, but as soon as you start changing anything, your screwed.
 

Read other 3 answers
RELEVANCY SCORE 86.4

Okay I assigned the access point a static IP 192.168.2.50 within the router IP range. My computer wireless card is detecting the access point but I can't get the belkin n600db to detect the access point.
 

A:I can't get my belkin n600db to detect my belkin f5d9231(access point mode).

Read other 14 answers
RELEVANCY SCORE 86.4

I was going to change my Belkin N150 password. Tried 192.168.2.1, but keep getting "page cannot be displayed". Allowed it in my firewall and privacy. Even turned off Bitdefender Virus Detect. What to do now?

Win7 - Dell laptop
 

A:Solved: Belkin N150 works, but cannot connect to 192.168.2.1

Read other 8 answers
RELEVANCY SCORE 86.4

hi i wanted to use my laptop downstairs so i disconnected the cat5, set up the wireless network and was using the internet on wireless .
when i went to the basement i found that my roku(netflix device) was no longer connected to my wirelessnetwork because of a password.
so i went back to my laptop and tried to find the password and messed something up . the wireless network was defined as unidentified, so i deleted it and right now i am connected via cat 5 with my laptop being unable to connect to my wireless wich is 1 foot away help pls.
sorry if this has been posted before and answered i tried a couple fix's but no avail
 

A:Solved: cannot connect to my belkin g wireless router

Read other 16 answers
RELEVANCY SCORE 86.4

We have quite the set up here..
Three computers and a HP 5SI printer connected to a pro curve switch box. We use Synergy so that we can use one mouse and keyboard with all three computers. I just installed a Belkin N+ router, so that I can use my laptop thru the wifi. Had problems getting the computers to connect to the internet, finally got that to work, then it took three hours to get Synergy to work again. Now the computer can not "see" the printer. We just put Win 7 on the main computer and I had the printer working before I installed the router. I even tried taking it off the switch box and hooking it directly to the router and the router don't see it either. I am just lost for a solution.
Any advice would be greatly appreciated.
Thanks
Jamie
 

A:Solved: Belkin N+ router will not connect to HP 5SI printer

Well after a little more looking it finally hit me the IP address on the printer was not within the range that the router required and I couldnt change that so I found out how to change the IP address manually on the printer... and how it works... YAY!!!
 

Read other 1 answers
RELEVANCY SCORE 86.4

I am unable to connect to the internet through my belkin wireless router.

We recently switched from ATT to Comcast in our house so we needed a new router since 2wire won't work with the Comcast modem. So we installed the router - no problems. Its been working great for about 3 weeks now, but yesterday when I tried to get on, it said the router had "no internet access" and I haven't been able to get it to work since.

I have restarted the router, the modem, and my computer several times and reset the router to factory settings to no avail. I thought it might be a problem with comcast (maybe the storms knocked something out) but the modem is working fine; TV and phones still work and all of the lights on the modem box (power, DS, US, Online, ect.) are still on. I called comcast and they said they have registered no issues in the area.

Right now I'm connected to the internet through the modem. I have absolutely no idea what the issue is. I've tried everything I can think of so I'm hoping somebody can help me out. Hopefully I don't need to buy a new router.

Here's everything I can think of that might help solve this:

-Router: Belkin N750 db Wireless N+ Router, Model: F9K1103V1
-Serial#: 121138GG109403
-Purchase date: ~1/5/2012

Ipconfig:

Windows IP Configuration

Host Name . . . . . . . . . . . . : BenMatthews-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No... Read more

A:Solved: Cannot Connect to internet through Belkin Router

Read other 12 answers
RELEVANCY SCORE 86.4

I have looked at tons of forums where they have not been able to access http://192.168.0.1/. Most of them have been solved but following what they did hasn't worked for me. My mother was on http://192.168.0.1/ and she set up some sort of security on our router (which is Belkin by the way Belkin_N_Wireless_209CAD). Since she changed it we haven't been able to connect to the internet through our router. When we try to connect this is what shows up.

(By the way, I'm only fourteen so I am QUITE confused by even the things I'm trying to do. But I'm the only one in this household who knows anything about computers)

I tried Start -> Run -> CMD and typing in ipconfig /all. I was looking at another forum where someone posted what they got back. My results looked nothing like that. I cannot even tell what my IP adress is through that sequence of events.

Right now I'm on here because I am manually connected to the router through a wire. That's the only way that I can connect. I'm not sure what to do. So if you can help me, well... Please do!

(This is what comes up when I type in ipconfig /all)
Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Users\Annamarie>ipconfig /all

Windows IP Configuration
Host Name . . . . . . . . . . . . : Annamarie-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enable... Read more

A:Solved: Belkin Router/Cannot connect to http://192.168.0.1/

Welcome to TSG
First thing I would do is reset the router to it's default configuration.Usually holding the reset button down for at least 15-30 seconds.
This will reset all settings,including the userid/password.
 

Read other 3 answers
RELEVANCY SCORE 86.4

Hi, hope somebody can help.

I just had to install a new hard drive in my Advent QC430 laptop and do a full destructive recovery to re-install windows vista. Before I had problems with my laptop, I had a connection to my Belkin wireless router/modem which worked fine.

I presumed as I had fitted a new hard drive I would have to set up the connection with the wireless router again. So I went through the procees of connecting my laptop directly to the router/moden via ethernet cable and ran the installation cd that came with the router. All went fine and the wizard automatically filled in all the IP info etc and the box came up saying connected. At this point I did have an internet connection.

The problem I have now is as soon as I disconnect the ethernet cable I loose the connection. I have tried 'find a network connection' on the lap top but it does not find the Belkin router.

I know I had this problem when I first set the router up a couple of years ago but I can't remember what I did to sort it out??

Any help would be appreciated! Stu )
 

A:Solved: Cant connect to Belkin Wireless Router

Read other 12 answers
RELEVANCY SCORE 85.6

I had been using a Belkin Wireless G router successfully until a couple of weeks ago when it died. I recently purchased a new Belkin Wirelell G + MIMO router and my troubles have begun.

I have a desktop running Vista wired into the router and it's working fine. When I initially set up the router, my Compaq Evo N600c laptop, XP, with a linksys wireless card worked fine. I was able to connect to the network, add the network printer and access the internet. My problems began when I turned on the security on the router.

My desktop still works fine and if I direct connect the laptop to the router I'm fine, but with security set, I cannot connect wireless. I've tried WEP64 and WEP128, neither is working for me. The prior router was set up with WEP128 encryption with no problems. I've tried everything that I know how to do, plus a lot of the advice and hints I've seen on line.

I'd really appreciate some help on this one. I'm not willing to run the network without security.

Thanks!
 

A:Solved: Cannot get laptops to connect Belkin Wireless with security

I suggest trying WPA, WEP is not a very good option in any case.
 

Read other 3 answers
RELEVANCY SCORE 85.2

i am looking for this product: Belkin Cable/Belkin Omniview CAT5 Extender

but i cannot find it, and the only one i find is in a uk online store i need one in the us. can someone please help out?
 

A:Belkin Cable/Belkin Omniview CAT5 Extender

I will try to find that for you
In the mean time , may I ask what you are going to use it for?
...or better what you would like to accomplish ?
also your network config
routers , hubs, PCs, peer to peer, domain..etc
is this it
http://catalog.belkin.com/IWCatProductPage.process?Product_Id=199221
 

Read other 2 answers
RELEVANCY SCORE 84.8

I have a Embarq 660 Series modem, but i wanted wifi. so i bought a belkin N300 wireless router this morning. And it won't connect to internet. I'm pretty sure i've plug the cable in the right spot. And the EQ 660R ADSL router/modem is working. The belkin package came with a CD, and it's the setup program for the wireless router. but as it tried to form a connection, it said failed to connect to the modem. so does this means embarq 660 series isn't compatible with Belkin N300?
 

A:Solved: why can't my eq 660R ADSL router connect to Belkin N300?

I vaguely recall that the Embarq modem/routers default to the same LAN IP addresses (192.168.2.x) as the Belkin routers do. If this is the case to daisy chain the routers you need to change the LAN addresses of one of them (e.g., to 192.168.3.x).

Or you could use the Belkin as just an ethernet switch and wireless access point ...

JohnWill's procedure (Aug. 30, 2008) for configuring a secondary router as a switch and, optionally, wireless access point follows.

Connecting two (or more) SOHO broadband routers together.

Note: The "primary" router can be an actual router, a software gateway like Microsoft Internet Connection Sharing, or a server connection that has the capability to supply more than one IP address using DHCP server capability. No changes are made to the primary "router" configuration.

Configure the IP address of the secondary router(s) to be in the same subnet as the primary router, but out of the range of the DHCP server in the primary router. For instance DHCP server addresses 192.168.0.2 through 192.168.0.100, I'd assign the secondary router 192.168.0.254 as it's IP address, 192.168.0.253 for another router, etc.

Note: Do this first, as you will have to reboot the computer to connect to the router again for the remaining changes.

Disable the DHCP server in the secondary router.

Setup the wireless section just the way you would if it was the primary router, channels, encryption, etc.

Connect from the primary router... Read more

Read other 3 answers
RELEVANCY SCORE 83.6

Hi there,

I've recently bought two new laptops, running Vista, and am having trouble wirelessly connecting them to my wireless network on my Belkin 54g Router. I can see the network I need to connect to, and the signal is 100% but when I try to connect it keeps saying disconnecting and something about WLAN . Unfortunately, i'm not very technical. I just about managed to follow the Router's inital set up.

Not sure whether you need to know but when the Router was first set up I set up two passwords, a main password and a guest password.

Also not sure whether you need to know but the network will allow me to plug my LAN cable in and will let me connect no problem.

I have successfully connected my old PC to the desired network, wirelessly, with the use of the Belkin Wireless Adaptor.

I hope there is someone who can help me with my problem.

Thanks in advance
 

A:Solved: Cannot connect Laptops (running Vista) to Wireless Belkin 54g Router

Read other 13 answers
RELEVANCY SCORE 83.6

Hi ~
I feel like I'm going in circles as I've spent so much time on the phone with tech support with both Belkin and Apple and I am no further ahead!! They each think its the others problem! So I am really hoping someone can help!

My son just purchased an ipod touch and so we bought a Belkin Wireless Router F5D7230. I set it up and he tried his ipod and had connection so we thought all was fine...however we hadn't tried our home computer. When I did, we did not have connection. I contacted Belkin who had me add DSN Server Addresses. The problem seemed solved! I had connection with my home computer! BUT I did not have my son check connection on the ipod as I figured he'd soon let me know if there was a problem! Sure enough the next day, he told me he had no connection. I called Belkin again and the guy had me check a few things but basically said everything was fine with the router and that I needed to contact Apple. I did this and they had me reset the ipod. I did this but still nothing. Unfortunately I could not stay on the phone any longer as it had been over 2hrs with both techs and I have 4 kids....!

So I am sitting here with a very expensive little toy that's not working and a very frustrated son who wants to be able to get to the internet on his ipod!

If there is anyone out there who might be able to help me, I would really appreciate it!!

Thank you,
Donna
 

A:Solved: Belkin Router - can connect with desktop but not ipod touch anymore!

Read other 16 answers
RELEVANCY SCORE 83.6

Hi. I have a IBM thinkpad t30 with windows xp (with SP2). We just got Verizon FIOS toda installed at my house. My desktop is connected to the wireless router (actiontec MI424WR) by an ethernet cord. I haven't successfully connected to the internet via wireless by secure network on our router. My roommate has.
I have a Belkin Wireless Notebook Card (it says "802.11g 2.4 Ghz" on the card, and its model F5D7010). I haven't had any trouble connecting using this card (it goes into a PCMIA slot on the leftside of the laptop) at places like panera or the wirless at my dad's house.
When I try to connect to the secure wireless network,
a dialog box will pop up saying "Please wait wile Windows connects to "XXXXX" network" with a little green bar moving from left to right as its working saying "Detecting network type..." then the computer freezes, I can't reboot it via ctrl-alt-delete or move the cursor. So I have to hold down the power button to manually turn it off.
Already had the verizon tech support people remotely try stuff on my computer with the computer hooked up to the router via an ethernet cord. He suggested uninstalling and/or reinstalling the ethernet card. I've done that, same result as above. he also suggested getting a new notebook/network card. Since this thing has worked fine up until now, I'm open to trying anything before I get a new one. Can someone please help?
 

A:Solved: IBM Thinkpad unable to connect to wireless via belkin notebook card

Read other 9 answers
RELEVANCY SCORE 83.2

Can anyone please help me?

I have just got a new computer and have attempted to wire it to the Belkin Router in our house. My PC is running Windows Vista Ultimate and the router we have is a Belkin ADSL2+ modem with Wireless G Plus MIMO Router - model # F5D9630-4. The router does have wireless capacity, however I am attempting to run it hard wired to my computer. When I connect the cable Vista automatically searches and finds the network, however it comes up as an "Unidentified network" and I cannot connect to the internet. My brother's computer is also connected to the same router (He is running Vista Home Premium) but his works fine. I have tried everything I can think of, including changing the DHCP settings in my registry as seen here: http://support.microsoft.com/kb/928233, but I have still had no success.

Any suggestions would be greatly appreciated!
 

A:Solved: Solved: Vista unable to connect to Belkin Router

Read other 11 answers
RELEVANCY SCORE 78

O.K. i have tried a ton of things to no avail. including looking for answers everytwhere.
My emachines tower with Windows XP worked jsut fine for 2 years wirelessly with a blekin G wireless adapter and a Belkin router. then I ran anti virus AVG to be exact, and now it wont connect to the router. neither wirelessly or through a LAN line. either through Windows wireless connection or the Belkin software. the Belkin software can't even find ANY networks in the area. Windows finds them and says it is connected but wont connect to anything. i get can not connect error on webpage. i have gotten rid of the connection and manulayy reconnected and reset router and modem and everything. the Belkin software (which i have used for years) wont even allow me to change any sttings. furthermore, its router test is coming back failed on every subject.
here's the kicker. my brothers laptop (which i am using now) is just fine and connects and gets internet and everything. so i have ruled out the router and modem. also, after running anti virus, i can not do a system restore will not let me., i have taken off the drivers and software 10 times by now (no exageration) and reinstalled. both from CD and from site drivers. can someone please lead me to the next astep. my though is that mayeb the antivirus changed an internet settign somewhere that is messing things up. but i checked and i believe all si good but my knowledge on networks is not the best so there may be something im missing... Read more

A:can't connect to Belkin router

Read other 11 answers
RELEVANCY SCORE 78

Hi I've always had connection problems with my PC, but it's always the wired connection that gives up the ghost! Not my wireless. So have decided to give going wireless a go...

Now my PS3 is already connection wireless, all I had to do was enter the WEP and everything else was done automatically when connecting the wireless card to my PC, it asked for my WPA key, which I've heard are the same, so entered my WEP anyway and it wouldn't connect.

Since then I've changed the router to WPA... didn't work. Made the wireless card to look for WEP... didn't work. Changed to no security at all... didn't work! After this I installed the Belkin software to see if that would help, unfortunately the program doesn't seem to run properly under Windows 7.

Anyway got any ideas? Or can you recommend a wireless NIC that definitely works within 7, and is installed easily!

A:Trying to connect with Belkin wireless NIC

  
Quote: Originally Posted by kayzee


Hi I've always had connection problems with my PC, but it's always the wired connection that gives up the ghost! Not my wireless. So have decided to give going wireless a go...

Now my PS3 is already connection wireless, all I had to do was enter the WEP and everything else was done automatically when connecting the wireless card to my PC, it asked for my WPA key, which I've heard are the same, so entered my WEP anyway and it wouldn't connect.

Since then I've changed the router to WPA... didn't work. Made the wireless card to look for WEP... didn't work. Changed to no security at all... didn't work! After this I installed the Belkin software to see if that would help, unfortunately the program doesn't seem to run properly under Windows 7.

Anyway got any ideas? Or can you recommend a wireless NIC that definitely works within 7, and is installed easily!


I would try installing the software with compatability enabled for XP/Vista and see if that helps. You could also try searching google or similar for the latest Belkin drivers. There might not yet be any yet for Se7en as it's still in the testing stages

Read other 4 answers
RELEVANCY SCORE 78

I have a Toshiba Satellite A25 laptop which is about 3 years old - it connects wirelessly to a SMC Router (7004 VWBR) - I recently added a Belkin router (Belkin N1 router) - my laptop shows that router, however is unable to connect to it (even though I chose the 802.11 b option on the router, considering the fact that my Satellite may not be able to communicate with this router.

The Belkin router does connect well with my Sony VAIO laptop. Can you please help me and let me know if I need to change any option on my Toshiba laptop or the Belkin router.
 

A:New Belkin Router does not connect

Read other 9 answers
RELEVANCY SCORE 78

It started when I could not access 192.168.2.1 because I didn't know the password so I tried to find the password to no avail so I searched on a few forums and belkins support to find a way to reset it or something and I found out that I had to reset it from the little button on my wireless router so I did. Then I tried connecting to AOL again but it will not connect, the router does work but AOL does not recognise it.
I've switched to my other modem until this problem gets fixed (hopefully) (this other one is not wireless) and it works with AOL
Few bits of info
I tried ipconfig /release and ipconfig /renew
 

A:Belkin Wireless cannot connect to AOL

Read other 12 answers
RELEVANCY SCORE 78

Hi I am new to this site and am at the end of my tether! Firstly I am not to clever with all the tech stuff so as much as I have read and tried to fix my problem I haven't succeeded .
I have a Belkin Wireless G Router which is connected to my Vogager 210 ADSL Routher (with BT Ireland). My desktop PC works perfect for the internet and my Advent laptop once did up to a few months back. It just won't connect at all now. I have plugged the modem directly into the laptop (well via the Belkin they are connected) and it connected to the internet immediately. From this forum somewhere I picked up about changing the IP address to static confused so while I was connected to the internet on the laptop I got the addresses and changed all on laptop but it still didn't work.
Any ideas please anyone? And talk to me like a 5 year old because I am slow around finding things on this pc!! Thanks so much.
 

A:Laptop won't connect to Belkin

Read other 6 answers
RELEVANCY SCORE 77.2

I bought one set of belkin powerline internet adapters to connect my blue ray for netflix and it was working great, I disconnected the one attached to my blue ray to try it in my mom's blue ray and worked great....Now it doesn't work on either....i was on the phone with Belkin for hours....
Anybody know what could be wrong?
I would appreciate some help before I return it....
 

Read other answers
RELEVANCY SCORE 77.2

I would like to use my TP-Link as an extender by connecting it with my main router Belkin AC1900.
Any idea if and how it can be done ?
 

A:Connect tp link with Belkin AC1900

Hi Davebhoy1888, and welcome to TSG.

TP-Link makes a lot of different networking products. Exactly what TP-Link product are you trying to use?

https://www.tp-link.com/us/
 

Read other 1 answers
RELEVANCY SCORE 77.2

Hello,

I'm having trouble connecting my desktop computer to my Orange Livebox router using my "Belking Wireless G USB Network Adaptor" - It appears to be finding the router and displaying it, but is unable to connect to it.

So far it has either just said "waiting for network..." and then not done anything, or said "network is unavailable". The router is working fine because I can connect to is using my laptop.

I have tried deleting the connection, re-entering the passcode, taking off the encryption all together. I can also connect to the internet fine using the ethernet cable.

This is driving me mad!!

Please help!

Patrick
 

A:Belkin Adaptor won't connect to Livebox

Read other 7 answers
RELEVANCY SCORE 77.2

I have a Dell Inspiron, Windows 7 laptop, that's about all I know about it. A couple months ago I got a Belkin Surf N300 router, when I first got it I had it set up through Hughes Net and everything worked fine, I had good connecting everywhere I went with my laptop. Now, I no longer have the Hughes Net and I hooked up through a Broadband thing, our desktop computer is connect to it and works perfectly fine, when I go to try and connect to it on my laptop it WILL NOT work, it just says its unable to connect to it. I have tried EVERYTHING I can think of and some stuff I didn't even know you could change, all I want is to use my laptop
Will some PLEASE help me.
 

A:can't connect to belkin router AT ALL! tried everything for hours!

Read other 8 answers
RELEVANCY SCORE 77.2

I recently purchased a Belkin Double N+ Wireless Router (F6D6230au4) Router. I have a HP2140 netbook running Windows XP Pro which can connect to the router both wirelessly or via cable connection. I also have a desktop PC running Windows 7 64 Bit Ultimate with a Marvel Yukon 88E8056 Gigabit Ethernet connection. I have been unable to get the desktop PC to communicate reliably with the Belkin Router if i connect directly. i.e. connect ethernet cable from PC directly to Router, however i have found that if i connect the PC to a hub and then connect the hub to the router, the connection is fast and stable. When i connect directly, the computer will hang and run very slowly. Looking at the task manager when this occurs, I can find no process that is consuming any large quantity of processor time.

While the hub solution works, it is not elegant and i would much prefer to connect directly. I have updated the PC's ethernet driver to the latest version without any success. I have spoken to Belkin's tech support who say it is a computer issue and their router is working fine.

Does anyone have any ideas how to proceed?
 

A:Cannot Directly Connect PC to Belkin Router

Sounds like the adapter could be having trouble auto-syncing a speed with the router. Try a different cable (remember that gigabit uses all 8 wires while 100 Mbps uses only 4).

Second, try different router LAN ports.

Third, in Device Manager right click the ethernet - Properties - Advanced - try setting the "Speed & Duplex" property to 1000 Mbps full duplex and 100 Mbps full duplex.
 

Read other 3 answers
RELEVANCY SCORE 77.2

I'm having trouble connecting to my Belkin router wirelessly (Wired works fine). I try to get to the IP address (192.168.0.2 and every other version of that) but it does not connect. On the router only Security, Wired, and Router are lit up; Wireless, Modem, and Internet are dark. I have reached the end of my limited computer capabilities trying to fix this problem myself. The Belkin website is a joke and offers no help.
PLEASE help!
 

A:Can't connect to Belkin router wirelessly.

On the router only Security, Wired, and Router are lit up; Wireless, Modem, and Internet are dark.Click to expand...

Using an ethernet connection login to the router and see what the Wireless Mode is. If it is 'off' or 'none' or similar turn it on. If it's already turned on then the radio must be dead.
 

Read other 1 answers
RELEVANCY SCORE 77.2

i recently bought a belkin n usb wireless adapter fd 5053 i got it to install using windows compatibility trouble shooter, but i cannot get on the internet with it. I can see the network but get the message unable to connect. The router i am trying to connect to is an airport express. Any help would be greatly appreciated

A:cannot connect internet via belkin wireless usb

  
Quote: Originally Posted by nickarmishaw


i recently bought a belkin n usb wireless adapter fd 5053 i got it to install using windows compatibility trouble shooter, but i cannot get on the internet with it. I can see the network but get the message unable to connect. The router i am trying to connect to is an airport express. Any help would be greatly appreciated


What network protocol are you using homegroup, or workgroup?

Are there any no win 7 machines on the network?
Ken

Read other 3 answers
RELEVANCY SCORE 77.2

Here's the story. My belkin 54G was working few years now. Just hours ago, I try to connect my iphone 3GS with belkin wifi. I go to the 192.168.2.1 (on my laptop - wifi), MAC address filtering and enable it. After insert my iphone 3gs ip address i press OK.

Here's the nightmare begin, after minutes. My internet connection is not working both on my laptop (wifi working but not internet) and the PC facing problem on internet connection. i try login again 192.168.2.1, hoping can restore it but it fail to load the page.

Anyone have any idea how to restore it?

Below is the screenshot of what I did.
1. my ipconfig show new IP address, 169.254.242.229. i try using this address to access but fail to load.
2. ping 192.168.2.1 but unreachable.
3. detail of my network connection details.
4. set my TCP/IP properties
5. ipconfig manage to change it and ping working now.
6. to my disappointment, 192.168.2.1 still not working. can't enter it's web interface.

 

A:Belkin 54G Router can't connect, 192.168.2.1 not working!

Read other 8 answers
RELEVANCY SCORE 77.2

i am using ADSL internet at my home.

Modem: Huawei SmartAX MT882a
Wireless Router: Belkin Basic Wireless Router N150

my problem is i can connect internet by dialing dialer with my username and password but can't connect wireless router?
how can i connect? my internet is dynamic.
 

Read other answers
RELEVANCY SCORE 77.2

Hello

I have a Belkin N1 wireless router and I am having problems connecting online wirelessly. I originally phoned Belkin's support team, because I couldn't get the Internet icon to stop flashing. However, the person I was talking to had me change a few settings, and now I cannot connect online wirelessly at all. I can connect via a networking cable though.

I've spent the last 3 hours on the phone, but I kept getting passed from one idiot to another, who all have very limited knowledge to begin with. I think phoning them will have cost me as much as the router cost me itself. I tried phoning the Belkin headquarters, but they seem to be away for their holidays.

If I search for the available networks that I can connect to wirelessly, I can find several routers, but not my own. I have tried resetting my network through the Belkin router set-up webpage, as well as by the reset button on the actual router. I just cannot get the wireless icon to activate on the router.

If anyone can help me, I would really appreciate it.
 

A:Cannot connect wirelessly via Belkin N1 router

What's the exact model of the Belkin router from the label on the bottom?
 

Read other 3 answers
RELEVANCY SCORE 77.2

I currently have a Belkin G+ 802.11g Wireless Router, and it works great, no problems connecting with cables. Wireless is a different matter. My network is secured with 64 bit WEP, and I have connected both my Nintendo DS and Wii to it by simply entering the SSID when attempting to connect to them. But I cannot get any notebooks to connect.

I am using a Dell Latitude D510, and there is no problems connecting to wireless networks as I work as an IT technitian for schools in my area, and it always connects to their wireless networks fine. Firstly, the main tool I use to connect to wireless networks is the Intel Wireless tool, and when I try to connect to my network with that, it asks for a ID that is printed on my router. It accepts the code listed as the routers PIN on the sticker underneath, but it won't connect. I've tried using the windows tools to try and connect, but when I do, I get a message saying that I need a certificate on the laptop so that the router can verify the laptops identity. When I try to connect to other wireless networks in the area, it just brings up a window asking for the password, and that's basically what I want my network to do
 

A:Cannot connect to Belkin router wireless

Does your router have something like a "Wi-Fi Protected Setup (WPS)" configuration page in the Wireless section? If so, check there and see if there is something you want to change.

You're not using WPA because a game machine doesn't support it?
 

Read other 1 answers
RELEVANCY SCORE 76

I am only 16 and this is my first time to deal with routers. I was just given a Belkin router (specs posted at the end) i know for a fact it works because i used it on this very laptop for 3 days before bringing it home. However, when i plugged it in the first two lights ( wired, router) light up blue within 5 seconds but the third light for the modem has been blinking orange for about 2 hours. the desktop that it is wired to says that there is an internet connection but i cannot seem to get access to any website other than the router setup. and my laptop will connect to it but it wont access internet either. i really have no idea.i reset my modem at one point and while the modem was booting up the modem light on the router turned blue and the internet light began to flash. this lasted about 10 seconds(long enough to get my hopes up) but then just went back to a flashing modem LED when the modem finished resetting (crushing my hopes). one last thing i feel i should tell you, on the router setup page, at the top it says Home| Help | Logout Internet Status: No Connection i am at my wits ends with the thing. the previous owner has no clue. and i am at a loss. please help me out!!
Specs from under the router (copied word for word)

N Wireless router
Model No. F5D8233-4
ver.1022

i've been through countless forums and emailed belkin i dont even know how many times. please someone help me
 

A:Wireless N Belkin Router won't connect to internet?

Have you entered the right details from your isp into the router ?
 

Read other 2 answers
RELEVANCY SCORE 76

belkin router unable to connect to certain web sites by hard wire,
but can access through the wireless side with the same computer with windows 7 and firefox or internet explorer. Any ideas.....
 

A:belkin router unable to connect to certain web sites

Access the router and check for web site restrictions for specific sites. Some router models have the feature.
 

Read other 2 answers
RELEVANCY SCORE 76

I bought this yesterday and have still not managed to make it work, i'm on a laptop running windows 2000, it's a Dell Inspirion 800 (or something like that) and it's about five years old, i got it from my mums boyfriend so any other information is unbeknownest to me.
I have installed everything from the CD that came with it and plugged it in, all that happens is it flashes and doesn't connect, when i open the utility it shows the me the My Computer -!> Router -!> Internet and won't connect and doesn't even find my router even though the router can see it (apparently, thats just what i've been told).
I have tried changing the options but the Advanced Options won't open at all and neither will the router options.
When i tried the connectivity test I get something like the first four passing and anything beyond WAN just failing, i would be more specific but i can't get at it right now.
I know i should have looked first but i have just searched google and seen some pretty negative reviews on Belkin products.
I can't afford another one and won't be able to take it back so any help would be sooooo appreciated!
By the way, I connect to a Netgear router (can't remember the model number), before this i had a D-Link which worked perfectly well but he end of the USB broke of so it won't work anymore
Well as i said any help will be greatly appreciated.
 

A:Belkin 802.11g Wireless G USB Network Adapter won't connect.

Read other 16 answers
RELEVANCY SCORE 76

Hi everyone,

I recently had trouble with my Comcast Xfinity internet service and called to have them send a refresh signal. I was up and running again with my ethernet, but my wireless service using a Belkin N150 wireless router hasn't worked since and I am getting pretty frustrated trying to figure this out!

From everything I had read I needed to do a hard reset of the Belkin N150 router and then reconfigure it's settings. Well I did the hard reset and power cycled everything, the modem, computer and router. I then plugged in everything again and connected the modem to the WAN on the router with one cable, and the computer to the LAN on the router with another cable. (I am using a Macbook Pro operating with Mac OSX). Now I cannot connect to the http://192.168.2.1 to configure the settings on the router at all!

I think the problem has something to do with my IP address. I opened the network settings and saw that my IP address is 50.138.25.x while my Subnet Mask is 255.255.254.0 and the router is being listed as 50.138.24.x .... any ideas on how to change this IP address to get my router connected or could it be another problem???

Thank you in advance for responding! I am so close to giving up on this issue and buying a new router!!!
 

A:Belkin N150 Wireless Modem can't connect

Read other 10 answers
RELEVANCY SCORE 76

Hello Everyone.
I purchased a Belkin N150 wireless adapter. Everything looks fine with it (its small and pretty)....but i cannot get it to connect to my BTHomeHub2. It see's the hub, my signal strenth shows as excellent, but it just wont connect. I have tried various options, uninstall/reinstall etc to no avail.
I'm running VistaHP.
Unfortunately after reading the manual i am still no further forward with it, and have reverted back to a wired connection for now. I would still like to attach the adapter however, so would be grateful if ANYONE out there would be able to assist a pc idiot like myself, and give me perhaps idiot-proof instructions on how to get the damm thing to work. I mean it when i say your dealing with a pc dummy here, so please be gentle with me.
I am almost at the stage of putting it under my shoe and breaking it into tiny pieces.
Thanks in advanceX

A:Unable to connect Belkin netw/adapter

I think this might help ya' BT Home Hub Explored

Read other 1 answers
RELEVANCY SCORE 76

im having problems with my new laptop. it wont connect to my belkin 45g router and the LAN dosent work as well. i have just go a acer aspire 5920 and i think it is because the router isnt compatable with vista. could that be the reason? im having similar problems with my macbook pro which is running on leopard the LAN works but the wireless dosent. any help will be appreciated.

A:my comp wont connect to a belkin router!

I have the same model and have a Belkin 54g router and it works fine.

so its not a compatibility issue

Read other 2 answers
RELEVANCY SCORE 76

I have a Belkin wireless router that fails to connect to the internet which is the final step in the installation process. All the connections are correct. It will try to connect to the internet up to ten times but still there is no connection. I called Belkin Tech Support and they talked me through several steps so finally they told me to send the router back and they would send another one. I received that one but had the same problem. They told me to send that one back and they would send another one. I did that but the same problem. They told me to send that one back and they would send another one, still the same problem. I plan to keep this one because the cost for shipping them back is expensive. Each time they said they would send an upgrade. I even tried installing it on my wife's laptop but still the same problem. I called my internet service provider and they told me several things to try which didn't work. The dsl modem works fine when I connect directly to my computer. I typed cmd in the Run block and at the black screen I typed ipconfig which showed the IP address. I tried typing in the IP address and also tried clicking on Obtain an IP address automatically. Any help would be appreciated.
 

A:Belkin wireless router can't connect to internet

Read other 8 answers
RELEVANCY SCORE 76

How do I get my verizon usb mobile modem to work with my wireless router? My router is a Belkin N150. Thanks in advance

A:Verizon USB Modem to Connect to Belkin Router

Moving your thread to the networking forum, and I have edited the title for better results.
Go to Start/Search and type devmgmt.msc Right click the devmgmt icon in the search results and Run As Administrator. In the Device Manager, under Network Adapters, is your Verizon Modem listed? or does it have a Yellow flag next to it? If the later, then you need to install the driver for it. If there are no flags and it is listed. Are you using the Verizon software to manage the wireless connection or the Windows software? Either way, you should have a Wireless icon in your system tray by the clock. Here you double click it to Show Available Wireless Networks. Does your Belkin Router show up? Can you try and connect to it? Do you have a wireless passphrase you need to type in?
Download the Wifi Inspector to test your wireless adapter and your routers signal.

Read other 1 answers
RELEVANCY SCORE 76

hi there i bought a beklin wireless g router a couple of weeks ago and my ipod touch is not picking it up and when i put the network name and wpa password in its saying can not find server can any one help befor i forget heres the ipconfig:

Windows IP Configuration

Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : college.cardonald.ac
Wireless LAN adapter Wireless Network Connection:
Connection-specific DNS Suffix . : Belkin
Link-local IPv6 Address . . . . . : fe80::1c62:48a7:a549
IPv4 Address. . . . . . . . . . . : 192.168.2.4
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.2.1
Tunnel adapter isatap.Belkin:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Connection-specific DNS Suffix . :
IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:73bc:1c4
Link-local IPv6 Address . . . . . : fe80::1c4e:1500:a3e8
Default Gateway . . . . . . . . . : ::
Tunnel adapter Local Area Connection* 13:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 14:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : Belkin

thanks if someone helps me!!!

Dean
 

A:cant get my ipod touch connect to my belkin router

Read other 11 answers
RELEVANCY SCORE 76

Hi all

I have two PC's using a Belkin G+ Mimo router to share my internet connection. Is there anyway that I can share onformation on my two PC's with each other?

Thanks
Owen
 

A:Connect to other computers using same Belkin G+ Mimo router

Yes, using the home networking settings in My Computer->My Network Places->Network Tasks-> Setting up a home or office network. There is also a good tutuorial there, and additional information at www.microsoft.com.
Take your time. It appears to be more confusing and more work than it really is. You can connect up to three with little difficulty.
 

Read other 2 answers
RELEVANCY SCORE 76

I have connected a belkin wireless router F5D9630 and it will not connect properly to all sites on some it goes halfway and thats it.After reading a reply on this forum I went to a site and downloaded a DRTCP021 exe .And changed the MTU to 1400.This allowed a few more pictures to download from the site but still it did not fully connect.Is there anything else I can do?????
 

Read other answers