Over 1 million tech questions and answers.

Synaptics touchpad suddenly stopped working

Q: Synaptics touchpad suddenly stopped working

I have a new Acer Aspire 1670 laptop which has worked fine for the past few weeks. However, I turned it on this morning (it worked fine last night) to find that my touchpad no longer works.

I don't feel this is a hardware issue in the sense that the touchpad has become unplugged from the internal PS/2 port, because the touchpad works for about 3-4 seconds after I log onto Windows/when the desktop loads up. That's the only time it works, it doesn't even work at the welcome/logon screen.

After those 3-4 seconds, something obviously happens that's preventing it from working.

I thought it might be my Wacom Graphire II graphics tablet, which is plugged in via USB 2. However, my touchpad and tablet have worked fine together for the past few weeks and have never caused any problems.

I unplugged the tablet, and uninstalled the tablet and touchpad drivers. I then rebooted, and - navigating around with the keyboard - reinstalled the touchpad drivers and rebooted. It still won't work.

Any ideas?

RELEVANCY SCORE 200
Preferred Solution: Synaptics touchpad suddenly stopped working

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Synaptics touchpad suddenly stopped working

Two things:

1. Does the touchpad have an indicator light that shows you when it is activated? The one on my HP does.

2. Is there an On/Off button above the touchpad...there is on my HP. Did you accidently turn it OFF

Read other 3 answers
RELEVANCY SCORE 96

I currently have a HP pavilion tx2520ae laptop and now and again whilst im am working on it i suddenly get the message 'synaptics touchpad has stopped working with two options saying : close and check for a problem online and close', after this message appears the touchpad still works, however the scroll bar for the laptop does not, this is an inconvenience as i do alot of my school portfolios on my laptop, some of which are nearly 100 pages long and i am constantly editing it, so i need the scroll bar to save me time and effort.

When i restart the laptop however this problem is corrected, but after a while it appears again and constantly restarting the laptop every 10 minutes is just too much effort to waste on fixing a simple scroll bar.

When the message appeared, I had tried to go onto the mouse options on the control pannel and i got an error message saying 'unable to connect to the synaptics pointing device driver. if you have installed another PS/2 pointing driver please unistall the synaptics driver by clicking on the yes button. you then need to reinstall your pointing divce driver for your external device again.
Do you want to unistall the synaptics driver now?'

I have not installed any PS/2 pointing drivers but I decided to try and reinstall it again just to be sure but when I reinstalled it i had to restart my computer and when i came back on it was working fine... for a while. The message appeared again and reinstalling it was just a comp... Read more

A:synaptics touchpad suddenly stops working

Read other 7 answers
RELEVANCY SCORE 94

can u plz s solve it out.mouse pad is working properly but when i want to copy something  copy list is coming nd go way.. i can't click on the copy... the option is coming nd go way.. i cn not prfrom some action. wil typing on keyword also i hve a problm..continue typing nd it stop agin i hve to click on that page then its workin..   

A:Synaptics TouchPad 64-bit Enhancements has stopped working

Hey @Preetish,  Welcome to the HP Support Forum. I hope you enjoy your experience here.  I understand you've lost some right-click menu options and are encountering keyboard functionality issues. I would like to help you with this.  Could you please reply with your PC product number? If you're not sure how to find that information, please click here for instructions: http://ow.ly/Sblkw  Thanks, 

Read other 1 answers
RELEVANCY SCORE 94

 
Problem event name: appcrash
app name: syntpenh.exe

Read other answers
RELEVANCY SCORE 94

My Qosmio G50-133 lost suddently it's touchpad, it's not working anymore, the mouse panel control shows the synaptics tab without any information in it.
I uninstalled it, restarted my windows 7 with no luck and I just can't find any driver for it on toshiba site or anywhere....

Does sosmeone have a clue ??

A:Synaptics touchpad stopped working on Qosmio G50-133

Solved !

Went to synaptics, downloaded their latest driver for my OS, installed it.

Bye.

Read other 2 answers
RELEVANCY SCORE 93.2

Hello,

I want to thank in advance for any responses I get to this thread.

I have a Gateway laptop model MT6840. It has a Synaptics touchpad. A couple of days ago, the touchpad stopped working completely. I took my laptop out of sleep mode, and the icon for the touchpad in the system tray was simply gone. I checked Control Panel: Mouse: Device Settings for the Synaptic touchpad, but all options are merely grayed out, and the device does not register on the computer anymore.

I believe I have tried almost everything. I first tried rebooting. I then tried disconnecting my external mouse and then rebooting. Then I tried uninstalling and reinstalling the driver from the Gateway website. I looked on Google, but found nothing of use. Alas, none of these things have worked.

This is a bit frustrating because, although I do have an external mouse, it is much more convenient not to have to bring the external mouse around when I transport it. And since I'm a college student, I need to get around with my laptop quite often.

I don't believe it is anything related to the hardware because it stopped working when the software (apparently) magically disappeared. I would really like to solve this problem.

If anyone knows of anything, please let me know. If there is some detail I should mention that would help, please also let me know.

Thanks,
Minus
 

A:Gateway MT6840: Synaptics Touchpad stopped working

Well, I decided to reboot again and go into the BIOS. I did, changing absolutely nothing (even choosing the "discard changes" exit option), logged onto Windows, and the problem was solved.

I have no idea how that worked, but it did.

I can't find a delete thread option, so if an admin is reading this, go ahead and just delete this.
 

Read other 1 answers
RELEVANCY SCORE 86.4

My touchpad seemed to work when I first started my laptop, but then it stopped as soon as programs started loading. I installed a driver from HP's website, and that didn't fix anything, even after I restarted my laptop. Any advice?

Read other answers
RELEVANCY SCORE 84.8

I went to use my laptop today, and I discovered that the touchpad has stopped working. In fact, I was unable to even get past the sign-on screen, and if it weren't for the fact that I got a mouse arrow with a plug-in USB mouse, the laptop would be completely dead to me.

My son uses the laptop for Minecraft gaming, but I don't think that has anything to do with this. Even a reboot didn't change anything. I wonder if a Windows update screwed something up (again)? I'm at a loss. I'm not always where I can set up a physical mouse to use - and frankly I don't want to have to.

Any suggestions?
 

A:My Toshiba Satellite touchpad suddenly stopped working

Found the solution. When I pressed the F5 button (not Fn + F5), I got a popup that said "touchpad disabled." When I pressed it again, it said "touchpad enabled." I unplugged my USB mouse and tried again, and it's now working. What a screwed up design that allows a user to accidentally disable one's touchpad with an accidental press of the F5 key. Then you have to research the problem before figuring out the problem. Someone in the Toshiba laptop design department should be fired.
 

Read other 2 answers
RELEVANCY SCORE 84.8

My Tecra R950-F0036 touch pad suddenly stopped working (Serial No.4D027959H bought in South Africa).

I have tried all the usual options such as updating the driver.
The driver appears to be there but FN F9 does nothing to switch the pad on.

Any ideas on how to re-activate the touch pad?

A:Tecra R950 - touchpad has suddenly stopped working

I don't know which OS do you use but check please hardware status. Check please device manager and be sure touchpad is listed there and enabled properly.

Read other 2 answers
RELEVANCY SCORE 74

Hi. My touchpad  is not working. I tried all uninstall and reinstall the driver but doesnt work. I hope you guys can help me.

A:Synaptics Touchpad not working

Hi, You could try the following. Hold down the Windows key and press R Into the Run window, type devmgmt.msc and hit enter. In Device Manager, expand Mice and other pointing devices.  Right click the Synaptics device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall. When this has completed, shutdown the notebook and then disconnect any peripherals ( ie usb mouse etc ). Unplug the AC Adapter and then remove the battery.  Hold down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter. Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f9 to load the defaults ( this is sometimes f5, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter. Let windows fully load and see if you have basic touchpad functionality - if you do, download and install the Synaptics driver below. http://ftp.hp.com/pub/softpaq/sp58501-59000/sp58572.exe When this installation has completed, restart the notebook again. Regards, DP-K

Read other 6 answers
RELEVANCY SCORE 74

Hi, I have a Dell Inspiron B130, yes old I know. Long story short, let a friend borrow it who prefers a regular mouse, they installed it. Now I cant get my touchpad to work AT ALL. I have gone through Dell website and downloaded driver, nothing is working. Under my Control Panel-Mouse- under hardware all I have is "HID compliant mouse" I do have a tab that has the Synaptics symbol and the word buttons, no option to enable it anywhere. If anybody can help me it would be greatly appreciated!!
 

A:Synaptics Touchpad not working at all

it maybe one of the functions keys - on Toshiba and HP I know the function Key F9 or F11 with FN key
so you hold the FN key down (on toshiba a drop down menu appears at the top of the screen ) and then press f9 or f11 or any key that has a symbol that may look correct
that will toggle between enable and disable the touch pad
 

Read other 2 answers
RELEVANCY SCORE 74

My Touchpad is not workingMy Touchpad is a PS/2 Port Synaptics TouchPad.Driver version is 19.0.12.0 which is a compatible driver provide by HP for this OS.My Laptop Model is HP Probook 4540sI try to upgrade the drive, I also tried every possible troubleshoot but my touchpad still refuses to work. Operating System is detecting it in Device Manager. I have posted this problem before, but I got no response from anyone.

Read other answers
RELEVANCY SCORE 74

My computer is a Toshiba Satellite L305 and has a Synaptics TouchPad. I use Windows Vista.

For a few weeks I had been getting messages saying "Synaptics TouchPad has stopped working, click here to solve the problem" or something similar. I didn't think anything of it because the mouse was working fine, so I just hit the "X". I'm not even sure that is a part of the problem even because it has stopped coming up.

Lately the mouse will work fine and after being on the computer for about an hour or so, the mouse will slowly stop working. I can still click and when I tap the touchpad, that will still click. I just won't be able to move the mouse. Restarting the computer does not fix it. Usually I just plug in a mouse and use it for 20-30 minutes and by then the mouse is working fine again.

Any suggestions?
 

A:Synaptics TouchPad not working.

Press FN and F7 at the same time. Post back with results.
 

Read other 3 answers
RELEVANCY SCORE 73.2

I have a HP Pavilion DM4-3099se Laptop with a Intel Core i5 dual core processer and 6GB of RAM. On this laptop is a Synaptics touchpad and uptill now it was working fine. It recently started glitching and now when i move my finger on the touchpad, the mouse moves but it repeatedly stops and then starts moving and then moves in all different directions. I went to the Synaptics website and installed the latest drivers for the touchpad and the installation was successful but the trackpad was still the same way. My external wired mouse works fine right now though. I tried restoring my system the earliest point there was on the list and still no improvement on the touchpad. Please help. Thank you.

A:SYNAPTICS TOUCHPAD NOT WORKING PROPERLY!

Thanks everyone for reading but I already fixed the problem. My computer shipped with two Operating Systems, one being windows 7 and the other being HP QuickWeb. I just booted into HP Quickweb and my trackpad was working fine and then i booted back into windows and it worked perfectly after that. I just though i would let you know and can somebody please close this topic because i dont know how to. thanks.

Read other 2 answers
RELEVANCY SCORE 73.2

Recently my laptop was repaired because the display was not functioning correctly. When I got my laptop back I reinstalled windows completely. Using HP Support Assistant I updated all my drivers. Everything worked fine except my touchpad is not working anymore. I reinstalled the Synaptics driver(version 19.0.19.1) multiple times but my touchpad still not works. Besides that the touchpad is not listed in Windows device manager. I don't know what to do to solve this problem. Hope someone can help me! Kind regards svdsande  

Read other answers
RELEVANCY SCORE 73.2

A while back my laptop's power cable was fried in a power surge. No damage seemed to have been done to my laptop. but now I fear there may have been some peripheral damage.

In any case, whether sure to the power surge or not, my touchpad is not working when the computer is plugged in. When the computer is not plugged in, the touchpad sometimes works, but it is spotty.

I have no idea how to fix this. Any help?
 

A:Synaptics TouchPad not working (not alt-f7 problem)

try re installing the driver for it.
 

Read other 1 answers
RELEVANCY SCORE 72.4

I turned on my 6 months old Acer Aspire One as usual and realised that something was wrong with my mouse. The left button simply doesn't work. Neither does tapping the touchpad. Nothing happens no matter how many times I push or tap. I can move the cursor around just fine and the right mousebutton still works. I can also plug in a USB mouse and use that instead.
I have checked the mouse properties. Under the tab "Hardware" the mouse is listed "Synaptics PS/2 Port TouchPad", and the unit status says it works correctly. I also checked the preferences, and both tapping and buttons are activated and set to normal.
I have tried restarting, removing the battery and Fn-F7 without any luck.
I have also tried switching preferences to left-handed - that gave a funny result: Both the right button and tapping the touchpad functioned like a right-click except now they could also for instance close a window and open the start-menu. The left-button still didn't have any function what so ever.
Hope someone can help me.
 

A:left button not working on synaptics touchpad

I would suggest replacing the touchpad and buttons.
 

Read other 1 answers
RELEVANCY SCORE 72.4

I'm on a Compaq Presario CQ50 laptop with Windows XP, and the other day when I hard-shutdown the computer and restarted, it booted up with a loud, long beep until I forced it to shut down again. When I restarted, the touchpad no longer functioned, and I've been using a USB mouse since. Also, occasionally the keyboard doesn't function after coming back from hibernating, though a restart fixes this.

I tried uninstalling and reinstalling the Synaptics driver, but although the driver appears to have been installed (the Program Files are present, as is the Add/Remove entry), the Synaptics TouchPad is not listed under Device Manager nor is it listed under Device Settings in the Mouse properties under Control Panel. Why isn't the driver fully reinstalling back again?

I've read on other similar problems to try checking to see if power is being sent to these devices under the BIOS, but apparently Compaqs are notorious for being difficult to get into the BIOS, so I haven't had luck doing that yet. System restore to a day prior to the event didn't help. No function keys disable the touchpad, and the touchpad light is white, not red (meaning it's "on"). I'm still under warranty, but if I can fix this without having to wait for it to ship back and forth, that'd be much more preferable.

Any advice at all would be much appreciated! Thanks!
 

A:Solved: Synaptics Touchpad No Longer Working?

Read other 9 answers
RELEVANCY SCORE 72.4

I have researched this problem quite a bit and tried several possible solutions that have worked for many users yet nothing had worked. I have tried several different drivers, tried tweaking settings with no solution in sight.

I am using W7 build 7022.

Can anyone advise?

-JKM

A:Synaptics Touchpad scroll feature not working

Scratch that! I have gotten it solved. My problem was trying the Synaptics drivers. The Alps drivers work perfectly!

Read other 6 answers
RELEVANCY SCORE 72.4

the left click on the synaptic touchpad is not working.  I can move the pointer with touchpad, but when I press the left  click button, nothing happen. I  try upgrading the synaptic tocuhpad driver and still the left click does not work. I reinstall the old version and I still have teh same issue. When I use an external pointer device the left click on teh external device work fine. Does anyone out there have answer to to this issue?

Read other answers
RELEVANCY SCORE 72.4

Hi there. I've recently started having touchpad problems with my beloved HP EliteBook Folio 9470m.  The issue:The Synaptics TouchPad and its 2 buttons (located just below the touchpad) do not work at all. However, the TouchStyk and its 2 buttons (located at the top of the touchpad) do work perfectly fine. How it started:I factory reset the ultrabook using the Windows 10 menu and when it started back up, everything was cleaned, but the touchpad and its 2 buttons (located below the touchpad) didn't work anymore. External mice do work when plugged. Common solutions that didn't work for me:-The orange light at the top-left of the touchpad is not lit up-Reinstalling the official drivers for Windows 10 (http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5271102&swItemId=ob_166960_1&swEnvOid=419...)-Installing different versions of drivers and even some for other brands of laptops-Resetting Windows 10 many times-Running driver scanning programs (DriversCloud, DriverScanner) Further notes:No matters which driver I install, the touchpad is always missing in the "Mouse properties" window. The last tab of the window should (if I am not mistaken) have both the Synaptics TouchStyk and TouchPad listed, but only the TouchStyk shows up. It appears as if the driver updated and might have corrupted something, or maybe it's overlapping with the old one and it didn't properly overwrite it (I'm running out of ideas...). Someone told me it might h... Read more

Read other answers
RELEVANCY SCORE 72.4

My first post! Hopefully NOT one of many.

I recently got a secondhand HP NX9105 laptop. I reformatted the hard drive and installed Windows XP (SP3).

All worked fine, except the touchpad isn’t working.

I could not see a driver for it so I went onto HP support website and downloaded the Synaptics driver (sp35444). The install got interrupted with the message "This Synaptics pointing device installation package does not support one or more of your pointing devices and will not be installed…".

I then tried the Alps driver (sp25796) and that installed (is visible in the Add/Remove Programs), but the touchpad still didn't work and it doesn't appear in either the Device Manager or in Control Panel->Mouse->Hardware tab.

Next I tried to install another version of the Synaptics driver (sp27681). This one installed so I then rebooted the laptop.

The touchpad still doesn't work, but now I have the Synaptics Device Settings tab in my Mouse settings. The problem is that all the buttons are grayed out and no devices are listed.

Is it possible that this is a hardware fault or is there anything else I need to download?

I'm really stuck now, please help...
 

A:HP NX9105 Laptop Synaptics Touchpad not working at all

well heres your drivers....

You touch pad should automatically just "work" with no special drivers...

Mabe it broke...
 

Read other 1 answers
RELEVANCY SCORE 71.6

Hi, I own a hp pavillion dv6 7050ca notebook and the touchpad is working but the disable/enable function on the top left corner, gestures, etc is not... The only way to get the functions working is to go to the mouse settings and right when it pops up, the functions work...but right after I shutdown,restart,hibernate, the functions stop working again..my brother has the exact same laptop and doesn't have this problem..we have the same device version(snynaptics pointing device driver version 8.1) and I also checked my msconfig to make sure synaptics is enabled on both startup and services..pls help me! Keep in mind the touchpad still works..just not the gestures and disable/enable square on top left corner of touchpad. And I also tried to uninstall and reinstall the driver but still no luck..any help will be very much appreciated!

A:Hp Pavillion dv6 7050ca synaptics touchpad functions not working?

Hello and welcome to 7Forums!
I would reccomend for you to try This to repair your drivers and such.

Post back results.

Read other 4 answers
RELEVANCY SCORE 71.6

Hello Team,I'm facing a strange technical issue with my Laptop TouchPad scroller on HP ProBook 4520S.TouchPad scroll works fine with almost every application except Windows native Apps i.e. Start Menu, Stores, NEWS etc.Its working absolutely with Windows Explorer, Google Chrome, Excel, Word, Power Point but no luck with Windows Native Apps. I have tried almost every thing i.e. Registry Key changes, Changing settings under Devices> Mouse & TouchPad but no luck at all on this. Also tried updating latest driver for Synaptics TouchPad.If any of you are aware of this issue pls advise the fix for it? Detail are as per below:OS: Windows 10 Pro x64TouchPad: Synaptics ClickPad V7.4PS: Earlier it was working fine with Windows 8.1 Pro.Thanks,PS

Read other answers
RELEVANCY SCORE 70.4

Yesterday my touchpad was suddenly turned on and I tried to disable it with the settings I always used (configuration screen) However, when i tried to open the control zone for it, it told me it couldn't connect to the driver. I decide to try and reinstall the driver, but it said another driver was already on my computer. I could delete it within the program files on the configuration screen, but there was nothing. So I couldn't deinstall it at all. Its really annoying because I never use my touchpad and my hand keeps brushing over it, so my mouse or text keeps going away.  Please I would like a solution. I can add files to what my screen keeps saying; but it's all in dutch. (Also my smart connect technology keeps flashing a yellow triangle and I have no idea what I have to do against that)

Read other answers
RELEVANCY SCORE 70

Hi, hope there's someone who can help me with this.
I'm using an acer aspire laptop, and my touchpad stopped working suddenly for a while - and after some time - until now - I can't scroll using two fingers (I have synaptics installed and it was working fine). Also the UP key in the keyboard isn't working. When I restart the system, tapping on the touchpad doesn't make a click unless I press ENTER first. This happened suddenly out of nowhere. Any help will be much appreciated.

Read other answers
RELEVANCY SCORE 69.6

Dear Thinkpad fans, does anybody experience on Windows 7 that sometimes after couple of minutes/hours internal touchpad does not respond on two-finger scrolling for short period of time and than two-finger scrolling begins to work again?I am using patched Windows 7 + latest drivers that are available for T460p, e.g. Synaptics 19.3.4.202, touchpad firmware is 1.1. Greets,  JanS

Read other answers
RELEVANCY SCORE 69.6

I am running Windows 10 on an Acer and recently downloaded and installed the update for the Synaptic touchpad (January 17, 2017).  After rebooting my laptop, I can use the touch pad to move the cursor when logging in, but once the system as loaded,
I cannot move the cursor using the touch pad.  I can left-click and right-click, and shrink and expand on the touch pad, but have no control over the cursor.  I currently have a mouse attached to the computer in order to move the cursor.
When I click on the link for more information about the update, there currently is no information.  Quite frustrating.
Please advise as how to resolve this issue.
Thank you.

Read other answers
RELEVANCY SCORE 69.2

PC details:
Packard Bell EASYNOTE TN65
Intel Core 2 Duo CPU T6400 @ 2.00 GHz
3.00 GB RAM
32-bit Operating System
Vista Home Premium, Service Pack 2.
Can anyone out there help me please.......

The laptop was closed down properly last night.
This morning I switched it on only to find that the cursor was frozen.

I have tried everything..... uninstalling the driver, updating... all very difficult without a mouse. Had to use the keypad. I am unable to right click without the touchpad and buttons...so cannot unzip the driver I downloaded from PB website.

Have also tried restoring to a previous date.... NOTHING works...
Am I just being thick?
Please help if you can...... somebody?

Katt52
 

A:Synaptics Pointer Device Stopped working overnight???

Most laptops have a key sequence or a button to enable/disable the touchpad. Have you checked for that? Maybe the FN and F6 or something similar?

For diagnostics and troubleshooting it would be easier if you got your hands on a USB mouse.
 

Read other 3 answers
RELEVANCY SCORE 67.6

My touchpad stopped working; I rebooted and the touchpad worked until the password eas entered and stopped working when computer unlocked. Used MS mouse to access settings; found the touchpad was turned off! Turned it to on position and it is working fine! How did ths happened?

Read other answers
RELEVANCY SCORE 67.6

A couple of days back, after a windows update, the fingerprint scanner on my Thinkpad X270 has stopped working.  Initially, in Device Manager, it displayed the following:  "This device cannot start (Code 10)" But after I tried to update the drivers, it now displays: "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31){Operation Failed}The requested operation was unsuccessful." Any ideas what I can do to fix it? It's as if it just suddenly stopped working overnight.

A:Thinkpad X270 - Synaptics WBDI Fingerprint Scanner Stopped Working

Did you see the below thread? https://forums.lenovo.com/t5/ThinkPad-T400-T500-and-newer-T/T570-Fingerprint-stopped-to-work-after-d...  





If a post answers your question, please mark it as an?Accepted Solution?!TP 25 Retro, W510 850 EVO, A30pRetired 385D, A20p, A21p

Read other 1 answers
RELEVANCY SCORE 66.4

So lenovo replaced my motherboard because of a defect HDMI port. The HDMI works, but now my fingerprint reader isn't responding. When trying to add or remove fingerprints in win10 settings... nothing happens. In form of no windows or program starts. No error in device manager, and Synaptics WBDI (SGX enabled) has no errors. Fingerprint reader is enabled in bios. Tried uninstalling and reinstalling drivers. No effect... Help?













Solved!

Go to Solution.

A:X1 Yoga fingerprint reader (Synaptics WBDI) stopped working after repair / motherboard replacement

Okey!  Few rounds around the Internet got me absolutely nowhere. Lenovo said that it was a known problem and the only way to fix it is to do a factory reset.... BULLS** is my response to that. Anything software related can be fixed without nuking your system. So i refused to give up and with a bit of trial and error i found a way. You have to tie your Microsoft account to a pin AGAIN! Even if you already had one. I guess the account is tied to your hardware somehow. Here are simple steps to fix it:  1. Make shure to Activate and Resett fingerprint reader in the BIOS Reboot and enter the BIOS (f1 during boot) Go to Security > fingerprint Make sure Predesktop Authentication is [Enabled]And to to "Reset Fingerprint Data" and press [Enter] to reset Save and exit   2. Make shure drivers are up to date and working Run Lenovo Vantage (windows store) to make sure your running the latest drivers for everything including the fingerprint reader. You can also download the drivers directly form Lenovos product support page, but Vantage actually works (so Kudos to Lenovo for that one). After that check you device manager if the driver is running currently. Like this: (Start menu > type "device manager")Like this... You don't want the yellow triangle warning or (SGX disabled)If you got a yellow triangle or (SGX disabled).. Then uninstall the ... Read more

Read other 1 answers
RELEVANCY SCORE 64.4

Mouse pad working fine this morning now can't find the cursor at all. Tried turning off and on, double tapping etc, but no joy. It actually won't even turn off. The power button slowly lights blue sporadically off and on. Please help me!

Read other answers
RELEVANCY SCORE 64.4

I have an Acer Aspire One D250 with a synaptics touchpad bought on March 20th which hasn't given me any problems till 3 days ago.

Friday, when I turned the computer on, the touchpad wasn't working. I tried Fn+F7 and nothing. The usual synaptics animated icon wasn't beside the clock. I went to the control panel>mouse>device settings and no device was listed there, while all the options were greyed out. I went to system>device manager and no "Mouse and other pointing devices" was listed. I went to Acer.pt (I'm from portugal) and downloaded the driver and installed it. The instalation went without problems and when I restarted the computer, the touchpad was still not working and nothing was listed on the device manager.

I called the Acer support line and the told me to restore the OS. I spent friday doing backups and I reinstalled Windows XP from Acer eRecovery Management. After all that, the touchpad wasn't working still.

Saturday was spent going to the store where I bought the netbook and trying to find a solution. Just as when I was going to give the netbook to warranty, a guy turned the computer on and the touchpad was magically working again.

I went home, all happy and warm and fuzzy inside.

Today, when I was copying my backups to the netbook again, I hit "cancel", and the icon next to the clock disappered and the touchpad stoped working again. Went to check, and nothing was listed on the device manager or on contro... Read more

A:Touchpad suddenly stops working

If the Acer Factory Restore failed to fix it and it intermittently comes and goes its likely a hardware issue. I'd be contacting Acer again and sending the unit in for warranty service.
 

Read other 1 answers
RELEVANCY SCORE 64

So one day I was using a laptop wirelessly when the internet just suddenly turned off. I checked my modem and it was working fine but when I checked my router, the lights were on but not blinking. it was just a steady light. when I checked for a wireless network the name of the network I usually use didnt show up.

I tried unplugging everything and plugging everything back in again and I tried pressing the reset button on the back of the router. Can anyone help?

Thanks so much

P.S. my router is a linksys WRT300N Wireless-N Broadband router
 

A:Wireless router suddenly stopped working (Lights still working though)

what devices do you have connected the router anything else wireless
make and model of the pc

does the PC work if you connect to the router by a cable ?
if not
try connecting directly to the modem and see if that works OK

we need to see some details, which will mean you need to copy to a working PC
------------------------------------------------------------------------
{run Xirrus Wi-Fi Inspector} Download and install
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC

http://www.xirrus.com/library/wifitools.php
Direct link to the program is here http://www.xirrus.com/library/wifi_download_redirect.php
Then run and install the program
if you get an error - You need NET Framework installed for the WiFi Inspector to function.

Run the program

post a screen shot of the program running - if there are a lot of networks showing can you click on "networks" top lefthand area - so we can see all the network information, and also post which network "Adapter Name" (1st column) is yours on the list

To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.
To upload it to the forum, open the full reply window and use the Manage Attachments button to upload it here.
----------------------------------------------------------------------... Read more

Read other 2 answers
RELEVANCY SCORE 63.6

hi everyone. please forgive if this is an ignorant question... seemingly out of nowhere my keyboard and mouse/touchpad stopped working. seems a couple keys work..like airplane key for example. i saw another person post about this but saw no response. anynhelp greatly appreciated. this touchscreen is killing me! thanks!











Solved!
Go to Solution.

A:flex 15 keyboard and touchpad suddenly not working...

Are you in Kiosk/Flex mode?

Read other 9 answers
RELEVANCY SCORE 63.6

A couple weeks ago while using my laptop, the keyboard and mouse pad suddenly froze up/lost power. No response to usb ports or cd drive. The screen stayed on, fan, power, even wifi connection stayed on, but couldn't get anything moving. The power button didn't respond so I had to unplug power and remove battery to shut it down. Worked fine after I restarted it.

Now, the same thing just happened again, on a DIFFERENT laptop with a different OS, browser, everything.

WTH?

Thanks
 

A:Touchpad And Keyboard Suddenly Stop Working

Read other 6 answers
RELEVANCY SCORE 63.6

Hi there,The touchpad on my hp elite x2 1012 suddenly stopped working. I checked the upper left corner and there is no orange light... normally if I double tapped it, it would enable/disable the touchpad. I am not great with computers so googling solutions have been difficult for me to follow.  Please help if you know a solution! Thank you so much   

Read other answers
RELEVANCY SCORE 63.2

Okay, this is the weirdest problem I've ever hard with computers. Here's what happened:

1. I had a few years old Pentium D 2,8GHz processor running on Asus P5VDC-X mobo. PQI 566MHz DDR2 and GF 7600GS 256mb PCI-E, 350W power.
2. I updated the mobo to Asus P5L-MX to support faster PCI-E cards. Everything worked fine, despite the processor ran too hot (58C on high use)
3. Because of the overheating I replaced the thermal paste but it had no effect on the temperature.
4. I thought I used too much paste so I replaced the paste again.
---
5. Bang, no video when I turn on the computer. I tried taking off everything part by part but nothing worked. It didn't work even when I only had processor and used the integrated graphics port. Tried resetting the bios too.
6. Nothing worked so I put back the old P5VDC-X and it worked like charm.
7. I thought it was logical that the problem was caused because of the mobo so I bought a new one, Asrock G31M-S.
8. No video... Did the same steps to this one too. It also had integrated gfx but it didn't work either.
9. The old P5VDC-X still works.

So I have no idea what's causing the problem. Is it the CPU? Mobo? PSU? RAM? I have no speaker on my case so I can't hear any beeps, but it won't start loading the OS from the hardrive and my USB mouse won't turn on. Tried using a differen't monitor too.

The main point is why it stopped working suddenly on new mobo's but still works with the old P5VDC-X? A... Read more

A:New mobos suddenly stopped working, old mobo working

Two new motherboards tells us you made the same simple install error in both of them.
Tell us more about power supply, memory, cable.
Did you make sure the memory was correct for both new boards, and what is the memory on the old board. Would also like to know the power supply and other hard ware.
What happens with the most basic, simple install. Does everything light up?

If you used the same hard drive with the same Windows install on the two motherboards, that is the problem. Windows has detected that you have changed the motherboard and will not operate unless you reinstall Windows on the drive on each new motherboard... One install for each motherboard.
My guess is that you will be fine if you change hard drives or do reinstalls or repair installs of the Windows on the new motherboard.
 

Read other 2 answers
RELEVANCY SCORE 63.2

suddenly mt touchpad stop working, i could move cursor,but i could not click on touchpad, i had to use left button instead of using touchpad,i was unable to enable or disable touchpad by doubble clicking on left corner.then i visit ur support forum,i download touchpad driver. By following ur suggestion , now i am able to use touchpad, but the only one problem i am facing now is , i am unable to disable my touchpad, and my touchpad light is always lighting

Read other answers
RELEVANCY SCORE 63.2

Hi, The touchpad on Thinkpad T430s is suddenly stopped working (unsing windows 10).  I can move the cursor but the bottoms are not responding).   I have updated/rollbacked the driver, BIOS, Windows, etc.. Still not working. (((I am now using a mouth and it's working.  Does this mean my touchpad is forever gone?  Is there a way to fix?  Please advice.  Many thanks in advance!

Read other answers
RELEVANCY SCORE 63.2

Hi!
2 days ago my touchpad stopped working...
I've tried to reinstall drivers... Still don't workin..

What can possible be wrong??
//Pcenrich
 

A:Touchpad stopped working! =(

Read other 8 answers
RELEVANCY SCORE 63.2

My touchpad stopped working but it shows listed under programs as Snapsis Quick Pad Driver, however when trying to evoke it or uninstall it I get an error message: There was a problem C:\ Program Synaptics\Syn tp|SYNL SDLL.dll the specified module could not be found.  When I try to reinstall it I get a message that I have to uninstall it first to reinstall.  Also when I go to evoke it under Mouse & Touchpad, only the mouse shows up, nothing listed for the touchpad.  When I go into safe mode to see if the touchpad will work in safe mode I get a message that my system can't find some hardware (I assume it means my touchpad??)  I have read that some people said their touchpads stopped working when they went from Windows 8 to 10; however I have been using 10 all along.  So I have run out of options that I know of; can anyone help me get my touchpad working again?  Thanks.

A:Touchpad stopped working

Can I ask,have you done a restart?





I am a very busy person. PleasePlease click ?Accept as Solution" if I solve your Problem

Read other 2 answers
RELEVANCY SCORE 63.2

I have a Sony Vaio and the touchpad and buttons just stopped working out of nowhere. Any idea what I can do to fix this? Maybe reinstall drivers? But from where? I didn't change anything; it happened totally randomly! Right now I have an external mouse hooked up and it's a pain! Please help.
 

A:Touchpad stopped working!!

Read other 16 answers