Over 1 million tech questions and answers.

Lenovo Ideapad Z510 keeps booting into recovery mode

Q: Lenovo Ideapad Z510 keeps booting into recovery mode

I just got my Lenovo ideapad z510 from the repair shop and it came back with literally all programs gone - energy manager and co. But my data was still intact. I downloaded a bunch of drivers and programs from the Lenovo support site and began installing. System restarted normally, and next thing, the one key recovery screen came up. I didn't initiate any recovery. I have a lot - and I mean A LOT - of important data on my laptop. Why the hell would I want to wipe them off? I need to start windows normally without this recovery thingy. Please, please, I need help skipping this thing.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Lenovo Ideapad Z510 keeps booting into recovery mode

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 97.2

I recently formatted my Lenovo Ideapad Z510 laptop & installed clean Windows 10 via Bootable Pen DriveWhile doing so I deleted all partitions from my hard disk including recovery partition & created a single new partition of C Drive & installed Windows 10 on it.The problem now I am facing is sometimes my laptop restarts automatically & then a blue screen appears saying Your PC ran into a problem and needs to restart.Then the recovery process appears& when I click recover It recover some days old version of my current operating system & uninstalls recently installed programmes.This is happening frequentlySo I want to know how can I recreate all those default Recovery Partitions&Do I need to format my laptop again for that?

Read other answers
RELEVANCY SCORE 81.6

i have the ideadpad 300-15isk running windows 10.often when i open the computer after sleep mode the screen won't turn back on.after the computer was in sleep mode and i open it i can see and hear it working but no matter what the screen stays off.the only soltion is a hard reset- pressing the power button until it shuts down and then restarting.how can i solve this problem? thank you

Read other answers
RELEVANCY SCORE 81.6

i have the ideadpad 300-15isk running windows 10.often when i open the computer after sleep mode the screen won't turn back on.after the computer was in sleep mode and i open it i can see and hear it working but no matter what the screen stays off.the only soltion is a hard reset- pressing the power button until it shuts down and then restarting.how can i solve this problem? thank you

A:Lenovo IdeaPad 300 15ISK - Sleep mode recovery pro...

Simply disable the ?Wake on pattern match? setting under the network adaptors advanced properties tabcredit to :http://jack.ukleja.com/fix-for-windows-7-random-wake-from-sleep-problem/

Read other 2 answers
RELEVANCY SCORE 80.8

?????? ????! ??????????, ???????? ?????: ?? ???????? ??? ??????????: ??????????????? Intel 4600 ? ?????????? Nvidia GT740m. ??? ??????? ??? ? ????? ?????? ???? ?? ?????????? ?????, ???? ??????????, ?? ????? ??????????? ? ??? ???????? ???????? ?? ???? ?????????? ??????????. ? ?????????? ???? ?????? ??????????????????: ? ????? ?????????? ????? (??????????? ?? ??? ?????? ? Overwatch ????? ??? ???? ??? ?? ??????-?????? ??????????.), ????? ? 1060? ???????? ????????? (??, ????????, ???? ?? ????????? ? ????????? ???.).?? ??????? ??????????? ????????? Windows7 x64???????? ?? ????? ?????? ???????????, ?? ??? ?????? ???????? ????????, ???? ??????????????? ??????? ? ???????? ?? ????????? ? ???????????? ????? Lenovo.??????? ???? ????????? ?? ?????? ??????????? Avira (?????????), ????? ????????????? ??????? ??????????? ????? CureIt.? ?????? ????????... Read more

Read other answers
RELEVANCY SCORE 80

For the last 4 or 5 years, i had a Lenovo Ideapad z510.It always worked like this:When it's plugged in it works perfectly when it's not or it's at 0% its sluggish and everything crashes.4 days ago I wasn't able to charge it more than 0 % I googled and fixed the problem the laptop is working and plugged in but its so slow like its not plugged in but it is and its charged 100% charged plugged in and I don't understand it also I updated windows and there was a black screen saying something about watch dogs but it went away and I googled in and they said that Avg doesn't work well with updates but its nothing to worry about.Help me fix this I something wrong with the hardware or software.4 days ago it worked fine I don't even have that much space taken up my graphics card is up to date so I don't understand it...

Read other answers
RELEVANCY SCORE 80

Hi There Everyone,I Have a Lenovo Ideapad Z510 i5-4200 @2.5 Gz with 2GB Nvidia Geforce 740 and 4GB RAM.I have updated it to Windows 10 64-bit, and it originally came with windows 8 64-bit. My lappy stutters a lot, and freezes.Kindly tell me if I can update  the bios(this is the most common response which I found from other members),If yes, then how? Also, how do i increse the cpu speed.And when the NVIDIA graphics card doesn't seem to work, because most games are lagging.Thanks & Regards,Utkarsh Y.

Read other answers
RELEVANCY SCORE 80

For the last 4 or 5 years, i had a Lenovo Ideapad z510.It always worked like this:When it's plugged in it works perfectly when it's not or it's at 0% its sluggish and everything crashes.4 days ago I wasn't able to charge it more than 0 % I googled and fixed the problem the laptop is working and plugged in but its so slow like its not plugged in but it is and its charged 100% charged plugged in and I don't understand it also I updated windows and there was a black screen saying something about watch dogs but it went away and I googled in and they said that Avg doesn't work well with updates but its nothing to worry about.Help me fix this I something wrong with the hardware or software.4 days ago it worked fine I don't even have that much space taken up my graphics card is up to date so I don't understand it...

Read other answers
RELEVANCY SCORE 79.2

dear sir, my name is nikhil in my laptop z510 ideapad i am facing battery problem it is not showing correct battery % and also not show batterey low warning message and it is stable at one position 99% please sir help me out from this problem .many of them his having this same problem please give some battery firmware update so to resolve this problem.it is not a hardware problem because it started from two days before previously it is working fine but now it is not working          I purchased the z510 last  july and while the battery life wasn't great on it now it has stopped working altogether. I have tried every conceivable fix for it from the forums here and none has worked. The problem that I am having is that the battery is stuck at 99% while charging and when it is off charge it will stay on for half an hour and the shut off hard without warning, it has caused me to lose progress in work. The battery gauge reset is no longer working either as it was on for hours and just kept showing 99%. I would appreciate a response back. This seems to be a problem with this make of laptop as far as Ican see.













Solved!

Go to Solution.

A:lenovo ideapad z510 battery problem

I also have Z510 Laptop (Purchased May,2014) I have also started getting similar problem. It is overcharging everytime & will drop power suddenly from around 50-60%, abruptly shutting down my Laptop. I am facing this issue since last week. Report from Windows Energy Manager:Battery:Battery Information Battery IDBAT20101001Lenovo IdeaPadAILZxManufacturerLenovo IdeaPadSerial NumberBAT20101001ChemistryLi-iLong Term1Sealed0Design Capacity43200Last Full Charge48000 Few weeks back, the full charge capacity was around 33000 showing wear level around 20%, which is quite high in just 1 year of moderate usage. Now it has started overcharging. Battery capacity historyCharge capacity history of the system's batteriesPERIODFULL CHARGE CAPACITYDESIGN CAPACITY2015-07-28 - 2015-08-0430,480 mWh43,200 mWh2015-08-04 - 2015-08-1126,929 mWh43,200 mWh2015-08-11 - 2015-08-1826,640 mWh43,200 mWh2015-08-18 - 2015-08-2526,640 mWh43,200 mWh2015-08-25 - 2015-09-0133,614 mWh43,200 mWh2015-09-0234,320 mWh43,200 mWh2015-09-0336,138 mWh43,200 mWh2015-09-0442,641 mWh43,200 mWh2015-09-0548,000 mWh43,200 mWh2015-09-0648,000 mWh43,200 mWh2015-09-0748,000 mWh43,200 mWh2015-09-0848,000 mWh43,200 mWh2015-09-0948,000 mWh43,200 mWh2015-09-1048,000 mWh43,200 mWh  Charging Behavior:Stuck at 99% for about an hour and when it reaches 100%, it is overcharged at 48000. Also, I feel batttery is getting charged very quickly.  Gauge Reset Behavior:Goes on for very long time, p... Read more

Read other 9 answers
RELEVANCY SCORE 79.2

I have an ideapad Z510 which originally came with windows 8. Now, as a result of that I changed the HDD, I must reinstall Windows. Do you suggest I reinstall Windows 8? where can I download it? Should I install windows 10? looking forward to hearing of you. m.-if required i can send the serial number.

Read other answers
RELEVANCY SCORE 79.2

i have bought Z510 one year back,within this short time i am facing battery problem.Battery is not charging and the system to be keep in plugged condition at every use.I am a home user and use laptop for limited time.I dont understand why lenova has not provided detachable battery which can be change by user only.Now new battery is not available in the market ,moreover Lenova is simply shedding their responsibility by saying Laptop in not under warranty.I request Lenovo to go for root cause analysis of this problem as hundreds of people are facing same problem in this model.Hope Lenovo would provide some software for attending the problem or atleast give the details of service provider from where battery can be repaired/replaced. 











Solved!
Go to Solution.

A:LENOVO IDEAPAD Z510 BATTERY PROBLEM

Hi Mukesh1967,
 
Welcome to the Forums  
 
As per the query we understood that you are facing issue with battery in your Lenovo Z510 laptop.
 
Try to perform the battery gauge reset, to perform the gauge reset go to energy manager and select the maintenance and guide and select gauge reset option and check if the battery charges.
 
Also uninstall the ACPI, to uninstall go to device manager select batteries option and right click on the Microsoft ACPI compliant control method battery and select uninstall and restart the machine and check for the issue.
 
Best regards,         
 
Ashwin.S




Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 9 answers
RELEVANCY SCORE 79.2

I have a laptop which is mentioned above. Had it for almost 3 years now and suddenly shut off while I was using it. It would not charge nor it would turn on. Tried the power reset thing which holds the power button for multiple seconds but to no avail.  Then went to a service center saying motherboard burned up. Such a shame since I really like the laptop and I spent  lot of money for it since I bought the i7 core version. I was hesitant to buy other brands before actually purchasing this lenovo laptop. I have a netbook (not a lenovo brand) which I had for 7 years now. But my almost 1000dollars z510 laptop broke and it hasn't been a FULL 3 YEARS?  WTH LENOVO! And motherboard replacement is VERY expensive. I'm really STRESSED about this. And ALL my files are there. Photos, work documents etc. I can;t stressed enough about how disappointed I am.

Read other answers
RELEVANCY SCORE 79.2

<p>Hi guys ,I have a Lenovo ideaPad Z510 , recently my laptop start to take much time in the logo page of Lenovo especially if my laptop was shutdown , he take 3 to 4 minutes to pass to windows.any idea please ?<p>

Read other answers
RELEVANCY SCORE 79.2

I have an ideapad Z510 which originally came with windows 8. Now, as a result of that I changed the HDD, I must reinstall Windows. Do you suggest I reinstall Windows 8? where can I download it? Should I install windows 10? looking forward to hearing of you. m.-if required i can send the serial number.

Read other answers
RELEVANCY SCORE 78.4

My Idealpad Z510 became unusable after it was automatically updated by Microsoft.  I tried to reset the machine with OneKey Recovery (by using Restore from initial backup).  However, the machine always goes back to the OneKey Recovery screen after Step 2 (Start Restoration) is completed and machine was rebooted.  I dont have another system backup.  My initial backup might be bad.  What should I do?  I was thinking to get a inital system ISO disk so might be able to retire it to the disk image...  Where can I get the initial system disk?  I called Lenovo support and was put on-hold for two hours yesterday - noone pick up the phone. Thanks to whoever can help.   

A:Ideapad Z510 OneKey Recovery gets stucked

I booted up the computer at the safe mode.  Now I have some errors: There is not enough space on the disk (error #112)Source: H:\OneKey\OKR\WSVD\wsvd.sysDestination:X:\windows\system32\DRIVES\wsd.sys Both H and X are Lenovo hidden directories.   There are 1 TB free on C:, 10 GB free on D: How do I allocate more space to X: (Boot)?

Read other 2 answers
RELEVANCY SCORE 78.4

My Idealpad Z510 became unusable after it was automatically updated by Microsoft. I tried to reset the machine with OneKey Recovery (by using Restore from initial backup).I booted up the computer at the safe mode. Now I have some errors: There is not enough space on the disk (error #112)Source: H:\OneKey\OKR\WSVD\wsvd.sysDestination:X:\windows\system32\DRIVES\wsd.sysBoth H and X are Lenovo hidden directories.There are 1 TB free on C:, 10 GB free on D:How do I allocate more space to X: (Boot) ?  

Read other answers
RELEVANCY SCORE 78.4

My Idealpad Z510 became unusable after it was automatically updated by Microsoft.  I tried to reset the machine with OneKey Recovery (by using Restore from initial backup).  However, the machine always goes back to the OneKey Recovery screen after Step 2 (Start Restoration) is completed and machine was rebooted.  I dont have another system backup.  My initial backup might be bad.  What should I do?  I was thinking to get a inital system ISO disk so might be able to retire it to the disk image...  Where can I get the initial system disk?  I called Lenovo support and was put on-hold for two hours yesterday - noone pick up the phone. Thanks to whoever can help.   

A:Ideapad Z510 OneKey Recovery gets stucked

I booted up the computer at the safe mode.  Now I have some errors: There is not enough space on the disk (error #112)Source: H:\OneKey\OKR\WSVD\wsvd.sysDestination:X:\windows\system32\DRIVES\wsd.sys Both H and X are Lenovo hidden directories.   There are 1 TB free on C:, 10 GB free on D: How do I allocate more space to X: (Boot)?

Read other 1 answers
RELEVANCY SCORE 78.4

 I have Lenovo ideapad z510 with Intel Core i7 4702MQ I'm planing to replace  my original lenovo Shipped RAMRAMAXEL 8GB (2 x 4GB) PC3-12800S SODIMM DDR3 1600 03T7117  Laptop Memory Kit With  Kingston HyperX Impact Black 16GB Kit (2x8GB) 1600MHz DDR3L CL9 SODIMM 1.35V Laptop Memory (HX316LS9IBK2/16) My question: is my laptop (ideapad Z510) compatible with the mentioned kingston RAM I apricate your response ASAP

A:Lenovo ideapad Z510 RAM upgrade to Kingston HyperX...

Hi Islam,
 
Welcome to Lenovo Forums.
 
Of course yes. Your machine is very much compactible with desired ram. Z510 laptop can support up to 16GB Dual Channel DDR3L-1333 / 1600 MHz
 
Please go through below links for better understanding.
Link1
Link2
 
Let us know how you get on.
Regards,
Shashi
 
Tap that Kudos button if I helped  If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! 

Read other 1 answers
RELEVANCY SCORE 78.4

Hello I've been looking here in Bucharest 2 months for a laptop lenovo Z510 and couldn't find. Can anyone assist me please? Thanks 

A:Lenovo laptop keyboard " Ideapad " Type Z510

Hi OMARDAKAR , 
 
Welcome to the Community Forums.
 
Using the part number for your keyboard on your search would allow you to find compatible and available keyboard in your location faster . You may use the parts lookup page to get it (just keep your serial number confidential) that would show your Machine model number and likewise FRU part number for your keyboard. 
 
You can try it match it from the FRU keyboard part number list from the hardware manual (page100-103). 
 
Update us with the Machine model number if needed . 
Hope this help answer your query.
 
Regards

Read other 1 answers
RELEVANCY SCORE 78.4

Dear Lenovo,     I have recently bought a Lenovo IdeaPad Z510, after installing Windows 8.1 x64 and all the Lenovo Drivers from your Website, and updating Windows 8.1 x64 with the latest updates, I got a problem:   My WiFi Connection is at 300.0Mbps that is coming from a wireless router tp-link from a Gigabit WAN connection, but your product can't get to 100MB speediest and tops at 30MB/upload and download, my other laptop "Other Brand" tops at 100MB/upload and download. Please advise if there is any solution to the problem, or if this is my first lenovo experience and I have to return the product. Best Regards, Dragos












Solved!

Go to Solution.

A:Lenovo IdeaPad Z510 Wireless Speed Problem.

ipconfig /all Spoiler (Highlight to read)Windows IP Configuration   Host Name . . . . . . . . . . . . : Lenovo-PC   Primary Dns Suffix  . . . . . . . :   Node Type . . . . . . . . . . . . : Hybrid   IP Routing Enabled. . . . . . . . : No   WINS Proxy Enabled. . . . . . . . : NoWireless LAN adapter Local Area Connection* 3:   Media State . . . . . . . . . . . : Media disconnected   Connection-specific DNS Suffix  . :   Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter   Physical Address. . . . . . . . . : 0C-8B-FD-4B-67-99   DHCP Enabled. . . . . . . . . . . : Yes   Autoconfiguration Enabled . . . . : YesWireless LAN adapter Wi-Fi:   Connection-specific DNS Suffix  . :   Description . . . . . . . . . . . : Intel(R) Wireless-N 7260   Physical Address. . . . . . . . . : 0C-8B-FD-4B-67-98   DHCP Enabled. . . . . . . . . . . : Yes   Autoconfiguration Enabled . . . . : Yes   Link-local IPv6 Address . . . . . : fe80::a8e6:6993:b9fe:bbf7%16(Preferred)   IPv4 Address. . . . . . . . . . . : 192.168.0.100(Preferred)   Subnet Mask . . . . . . . . . . . : 255.255.255.0   Lease Obtained. . . . . . . . . . : Tuesday, January 21, 2014 4:19:04 PM   Lease Expires . . . . . . . . . . : Tuesday, January 21, 2014 7:54:46 PM   Default Ga... Read more

Read other 9 answers
RELEVANCY SCORE 78.4

Hello everyone!Details:I have a ipdeapad (z510) and windows 8.1 as os.(I use the latest BIOS version) Problem:when i sleep or hibernate laptop , the power (ac and battery both)  suddenly cut off ,and after that the power button and front LEDs not working both.(the laptop actually dies and won't turn on). my solution:Fortunately I find a way to fix this problem but its nit the best.disassemble the laptop (open the bottom of it ) and unplug the battery and ac power and plug them again. that work , but it's realy difficult to do this proccess. my guess:I think this problem can related to bios. please help me to fix this problem. Thanks!    

Read other answers
RELEVANCY SCORE 78.4

Hello, 
I had this problem with my laptop lenovo z510, it's battery charges fast, and when it's unplugged then used it, it automatically turn offs without warning of low battery. It automatically turns off. What do you think its problem? Please help me. Thank you!
 
Mod Comment: Moved post for new problem. Edited subject to include model/issue.











Solved!
Go to Solution.

A:Lenovo Ideapad z510 Low Battery Warning Problem

same problem here. im from the philippines as well.. tsk tsk!

Read other 9 answers
RELEVANCY SCORE 78.4

Hello I've been looking here in Bucharest 2 months for a laptop lenovo Z510 and couldn't find. Can anyone assist me please? Thanks 

A:Lenovo laptop keyboard " Ideapad " Type Z510

Hi OMARDAKAR , 
 
Welcome to the Community Forums.
 
Using the part number for your keyboard on your search would allow you to find compatible and available keyboard in your location faster . You may use the parts lookup page to get it (just keep your serial number confidential) that would show your Machine model number and likewise FRU part number for your keyboard. 
 
You can try it match it from the FRU keyboard part number list from the hardware manual (page100-103). 
 
Update us with the Machine model number if needed . 
Hope this help answer your query.
 
Regards

Read other 1 answers
RELEVANCY SCORE 78

when i turn on the system it wont load,it just stays on 'lenovo screen' and it will start loadingwhen alt+ctrl+del is pressed then only it will boot 1. Scan for virus, etc.-------No virus found2. Run in command prompt with admin rights "sfc scannow". Do not include the quotation mark.----windows resource protection did not find any integrity violations.  

Read other answers
RELEVANCY SCORE 77.2

Good morning, i have buy a Sandisk Ultra II 1 Tb, 1/2 years ago, installed into my Lenovo Ideapad Z510 removing the old glorious SSHD.SSD work good during 1/2 yearswith Windows 10. Last week after an upgrade of Avira (3-4 day after Meltdows microsoft patch) i found my notebook crashed with BSOD screen that says inacessible boot device. Pushing a button start restoring page of Windows. Work prompt, restart. Do not work windows safe mode, restore recovery point, automatic restore starting. Not i try to save my data before try restore windows 10 or format all and install OS.Restartin PC after see that Windows Safe mode do not work i try to see what happen into Bios. Here i found boot set on legacy boot (normally was on UEFI). After have changed boot to UEFI i see that there are now SSD Sandisk Ultra II showed by bios.I try anyway to start notebook with UEFI and the PC cant start... it show a blue/white windows (like old windows 95 setup) with error "default boot device missing or boot failed. Insert recovery mdia and hit any key then select boot manager to chose a new boot device or to boot recovery media".Fortunately my Lenovo notebook have a reset button and with it i can restart bios and change boot to Legacy boot parameter. Outside my notebook the SSD work, like external hard drive with another notebook.I ask what happen on Microsoft forum.They says that Sandisk Ultra II is incompatible with Lenovo controller (think SATA controller). But last 1,5 years SSD work fine. Then i ... Read more

Read other answers
RELEVANCY SCORE 77.2

Good morning, i have buy a Sandisk Ultra II 1 Tb, 1/2 years ago, installed into my Lenovo Ideapad Z510 removing the old glorious SSHD.SSD work good during 1/2 yearswith Windows 10. Last week after an upgrade of Avira (3-4 day after Meltdows microsoft patch) i found my notebook crashed with BSOD screen that says inacessible boot device. Pushing a button start restoring page of Windows. Work prompt, restart. Do not work windows safe mode, restore recovery point, automatic restore starting. Not i try to save my data before try restore windows 10 or format all and install OS.Restartin PC after see that Windows Safe mode do not work i try to see what happen into Bios. Here i found boot set on legacy boot (normally was on UEFI). After have changed boot to UEFI i see that there are now SSD Sandisk Ultra II showed by bios.I try anyway to start notebook with UEFI and the PC cant start... it show a blue/white windows (like old windows 95 setup) with error "default boot device missing or boot failed. Insert recovery mdia and hit any key then select boot manager to chose a new boot device or to boot recovery media".Fortunately my Lenovo notebook have a reset button and with it i can restart bios and change boot to Legacy boot parameter. Outside my notebook the SSD work, like external hard drive with another notebook.I ask what happen on Microsoft forum.They says that Sandisk Ultra II is incompatible with Lenovo controller (think SATA controller). But last 1,5 years SSD work fine. Then i ... Read more

A:Lenovo Ideapad Z510 controller incompatible with Sandisk Ultra II ?

i find a solution:1) use a restoration point if before maked2) install a new WIN10 system after backup and change OS, becouse WIN10 is very bad...^,^'''

Read other 1 answers
RELEVANCY SCORE 76.4

Hi guys. I have this notebook and I have also ssd samsung 850 evo. when I start the pc, lenovo logo appears and points are turning longer under the logo around 10 seconds. before that everything was usual. only 3 or 4 seconds max waiting time. how can I fix this problem?

Read other answers
RELEVANCY SCORE 75.6

This issue started about 6 months ago and has gotten worse. in the beginning it only occured when i colosed the lid of the laptop to put it to sleep but did not occur or not as reularly when using the windows power menu and manually putting it to sleep. When it did occur white, pink and green horizontal lines/ pixels would dance up and down the screen. I monitor the temperature and it is within normal ranges. The mouse would also freeze and unfreeze and i have to patiently wait and to access the power option menu. a restart usually solves the problem. Now i am shutting it down completely and it is getting worse. it starts (with or without lines on the lenovo screen) but by the time i get to the sign in it is full of line and now the lower part is going grey and shifting to white. if i can access restart it solves the problem. i am then able to use the computer without any issues. I did a discharge of the battery and guage reset. since i mostly use it plugged in i keep the battery at 60%. I purchased the computer in May 2014 and had a power issue (I think, lenovo never comfirmed what the problem was). It was sent back and repaired in 2015 under warranty. I sadly think i got a lemon. When I belatedly checked the new owner checklist on the forum it also reminded me that i don't have one key recovery. When i first recieved the laptop i attempted to create one in the partition drive but it wouldn't allow me to. I seem to remember it said there wasn't enough room. a technician trie... Read more

Read other answers
RELEVANCY SCORE 74.8

Hi every bodyDoes anybody has problem with Lenovo Battery Gauge  installation with Windows 10 build 15007 Enterprise  on ideapad Z510 and if he get solution to this problem

Read other answers
RELEVANCY SCORE 70

Hi Guys,I have a Lenovo ideapad Z510 (built-in battery) using windows 10 and Lenovo vantage is installed. How can i perfom a gauge battery reset please?The problem i'm facing now is that the battery percentage isn't accurate, it stucks at a percentage for example 99% , so the system doesn't recognise that the battery drains and suddenly it dies !! without any alerts or keeping my work as well !!i tried the firmware update tool but it keep saying that no updates for attached battery. And i searched alot about how to perform a gauge reset but nothing available for this version of lenovo vantage. I also tried charging in BIOS mode for 10 mins and discharging for another 10 and repeating this process 3 times but nothing changed.So please any help!

Read other answers
RELEVANCY SCORE 70

Hi Guys,I have a Lenovo ideapad Z510 (built-in battery) using windows 10 and Lenovo vantage is installed. How can i perfom a gauge battery reset please?The problem i'm facing now is that the battery percentage isn't accurate, it stucks at a percentage for example 99% , so the system doesn't recognise that the battery drains and suddenly it dies !! without any alerts or keeping my work as well !!i tried the firmware update tool but it keep saying that no updates for attached battery. And i searched alot about how to perform a gauge reset but nothing available for this version of lenovo vantage. I also tried charging in BIOS mode for 10 mins and discharging for another 10 and repeating this process 3 times but nothing changed.So please any help!

Read other answers
RELEVANCY SCORE 70

Hi Guys,I have a Lenovo ideapad Z510 (built-in battery) using windows 10 and Lenovo vantage is installed. How can i perfom a gauge battery reset please?The problem i'm facing now is that the battery percentage isn't accurate, it stucks at a percentage for example 99% , so the system doesn't recognise that the battery drains and suddenly it dies !! without any alerts or keeping my work as well !!i tried the firmware update tool but it keep saying that no updates for attached battery. And i searched alot about how to perform a gauge reset but nothing available for this version of lenovo vantage. I also tried charging in BIOS mode for 10 mins and discharging for another 10 and repeating this process 3 times but nothing changed.So please any help!

Read other answers
RELEVANCY SCORE 66.4

Good day everyone.I encountered a problem with my laptop yesterday. When I restarted my laptop, it showed me this:   Running startup repair always says "Startup Repair couldn't repair your PC". I have no idea what to do with this. My important files are in here, so it would be great if anyone could help me. 

Read other answers
RELEVANCY SCORE 66

Good morning everybody,

I have bought my laptop 1 year ago and everything was going ok, i installed many programs (Adobe illustrator) and games (PES2011) and many others and i faced no problems.
One day, my cousin used the laptop to watch a new movie but he forgot to charge the battery during that time until the laptop shuts down alone due to empty battery.
On the next day, i tried to power on my laptop it starts normally until it reached the Windows 7 logo it automatically shuts down. I tried again for several times with the same result then a blue screen with white writings on it was displayed on the screen (harddisk failure).
I bought a new Toshiba 500GB HDD and burned a new Windows 7 Ultimate x64 DVD to install a fresh new copy of it but i have faced the following:
1- when I power on the laptop it works normally.
2- I press F12 to choose the device to boot from (Boot from DVD)
3- It starts normally and a windows 7 screen appears with a loading bar. It is filled quickly in the first time then a new screen appears with a loading bar starts to fill but after around 75% of the loading bar is filled the laptop shuts down.
I tried to restart it for several times with the same result.

I make the following points to try to restart the laptop but always with the same result:
1- Remove the new HDD and then insert it
2- Remove the Rams and then insert them
3- Remove the battery and then insert it.

Laptop Description
Lenovo IdeaPad Y560:
Intel Core I3
4GB Ram
ATI Mobility Radeon ... Read more

A:Booting problem with my Lenovo Ideapad Y560

Hello Hasan and welcome to Seven Forums.

Please forgive me but I'm a little confused. You say:






Quote:
I bought a new Toshiba 500GB HDD and burned a new Windows 7 Ultimate x64 DVD to install a fresh new copy of it but i have faced the following:
1- when I power on the laptop it works normally.
2- I press F12 to choose the device to boot from (Boot from DVD)
3- It starts normally and a windows 7 screen appears with a loading bar. It is filled quickly in the first time then a new screen appears with a loading bar starts to fill but after around 75% of the loading bar is filled the laptop shuts down.
I tried to restart it for several times with the same result.


- Are you replacing the original laptop hard drive with the new Toshiba or is the Toshiba an external USB hard drive?
- Are you trying to clean install Windows 7 Ultimate x64 to the original laptop hard drive or to the new Toshiba?
- Where did you get the ISO file for Windows 7 Ultimate?

Read other 9 answers
RELEVANCY SCORE 66

Hello,

Im new here. So yesterday instead shutting down my laptop what I did is sleep mode it. When I got home I tried turning on it but it didn't so I plugged my charger but my laptop didn't light up (showing that the charger is plugged in the laptop). Please help?

Thanks in advance

A:Lenovo ideapad z410 w8.1 not booting up after sleep

this is happening to me too.
Currently I disable bluetooth device,then renable it and it works till next time computer sleeps.
Last update did something to bluetooth.

Read other 3 answers
RELEVANCY SCORE 66

I don't know which OS in on this unit, if it's 8 or 10 but when I power on the only screen I am seeing is the Boot Menu screen with 2 options showing exactly as below:
 
1; Windows Boot Manager
2. eMMC Card0: Sandisk iNAND 64gb
 
Any option I choose between those two then ENTER brings it back to that same screen, pressing ESC does the same thing. I tried F111 and F12 at power on to see if there is a recovery or reset option but only that boot screen shows up, help please?

A:Lenovo ideapad 100s-141BR not booting

It's ok, the HDD is shot

Read other 1 answers
RELEVANCY SCORE 65.2

So I've had my Lenovo laptop for about a year now, I believe the warranty on it is expired now. I don't want to spend money on what I think is a simple repair. When I was trying to clear my storage I fell asleep and my laptop died, it didn't get to properly clear the storage and shut down. Now whenever I try to load up my laptop, this message appears  (If you can't read the picture; The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, and then restart installation.) When I click OK, it loads and then the same message appears again. It's an endless loop. I looked up different videos telling me to fix this, I should disassemble the laptop, take out the battery, and hold the power button down for about 30 seconds. I wouldn't mind trying this approach, but I can't find a disassembly video specifically for my laptop and I don't want to damage even further or beyond repair. If that's what I need to do, then getting help here with it would be great. Then I tried opening the boot menu, I did this by pressing FN and F12 when turning on the computer. I wanted to try and run a diagnostics test to try and see what was wrong, but it only gave me these options and couldn't figure out how. I pressed enter on both of these options to see if it would fix this issue, nothing happened as far as I could tell.  I moved on from that to the InsydeH20 Setup Ut... Read more

Read other answers
RELEVANCY SCORE 64.4

I am not able to update my VGA driver with any other than ATI Mobility Radeon HD 5730. However when I boot having this driver keeps my screen blank till I have to reboot it in Safe Mode and choose Standard VGA driver.
I have attached my MiniDump folder with this thread.

What shall I do?

Note: I have downloaded latest drivers from Lenovo site. Used ATI Catalyst, AMD updates etc. but nothing resolved my issue.

A:Lenovo Ideapad Y560 shows blank screen after booting

I have the same issue - can anyone shed light on this?

Read other 1 answers
RELEVANCY SCORE 64

i have bought an already used ideapad 700 it came with enterprise i reintalled a home version using media creation tool but there is something i don't understand as u can see in the imges below there is a partition called recovery about 20 gbshow can i recover this partition and is it the main image came with laptop or not i asked the first owner he said he just installed a new enterprise for his work and we tried to reset the enterprise it came back with enterprise againand how can i manually download lenovo utilites and wallpaper and all other stuff comes with original image?

Read other answers