Over 1 million tech questions and answers.

Booten von Harddisk

Q: Booten von Harddisk

HalloBei meinem Laptop hat ein freund probiert Windows neu zu installieren. Er hat alle angezeigten Platten gelöscht und hat dann auf der hauptplatte Windows installiert. Nun starte ich der Laptop und es kommt Boot Device Not Found Error or Hard Drive Not Detected. Drück ich da F10 und gehe ins BIOS und mache legacy mode auf enabled und secure mode auf disabled und speichere und drück dann F9 kommt das Boot Menü und da steht auch meine Festplatte. Klicke ich darauf macht er Windows normal auf. Aber nach Neustart dasselbe wieder. Nix geht, ausser wenn ich die ganzen bios Umstellungen vornehme. Kann man den legacy mode nicht immer aktiv lassen? Oder was kann ich einstellen das er sofort weiß das er von Harddisk starten soll. Weil original steht im BIOS ja nur das uefi Menü und da steht nicht Harddisk dabei, nur wenn ich umstellen auf legacy mode, dann kann ich auch Harddisk auswählenBitte helft mir

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Booten von Harddisk

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 48.4

I have 40GB harddisk and now I am moving to 120GB SATA hardisk. But i want all the data with softwares, plugins and all the windows settings to be transferred in the 120 GB harddisk.

There is any way so that all files and setttings will transferred and I dont have to install everything again.

In my system Windows XP Pro SP1 is installed.
 

A:Transfer data/settings from small harddisk to big harddisk

Read other 6 answers
RELEVANCY SCORE 48.4

Hello all,

I need some advice.

I recently replaced my old harddisk to a new harddisk. The old harddisk has windows xp home and other programs installed.

I did not format the old harddisk, I only took out the old harddisk and replaced it with a new harddisk. I then installed windows xp home to the new harddisk.

While I am installing programs on the new harddisk, I discovered that one of the programs do not allow me to activate the program license because I have previously activated the program on my old windows. I need to do a proper uninstallation to release the license, then I can activate the license of the program in the new harddisk.

My question is, can I take out my current new harddisk, replace it with the old harddisk, boot up as normal into the old harddisk windows, uninstall the program inside the old harddisk, then replace the old hardisk with my new harddisk again.

Will I be able to access the old windows on the old harddisk?
Will it mess up my current windows/programs settings?
Will my current new harddisk windows be able to work as normal after accessing the old harddisk windows?
I thought of accessing the old harddisk as a slave, but I do not know if it is possible to access the old harddisk and do a proper uninstall of the program?
Is there any better way of uninstalling the program on my old harddisk?

Thanks in advance.

A:Accessing Win XP on old harddisk to uninstall programs after installing new harddisk

you have to swap out the drive completely. at no time should you have both hdd plugged in.

repeat, do not run them as master and slave. run each hdd individually at each time only.........

Read other 5 answers
RELEVANCY SCORE 34

My computer came with a 10gig hardrive with Windows Me preinstalled. I upgraded to Windows XP Home Edition and have been very impressed it was well worth the £90 I payed for the upgrade pack! I purchased 64MB of RAM to bring my memory from 64MB to 128MB and my computer hasn't crashed ONCE since I got XP! But having two operating systems on one 10 gig hardrive and lots of preinstalled programs such as office has taken its toll and I was warned the other day that my harddisk was nearly full! I deleted all my unnessesary files and managed to get back 1 gig of space but I'm still not happy and would like to get a new 20gig hardrive. It makes more sense to use my recovery disk to return my computer to the way it was when it left the factory and reinstall windows XP on the new harddrive leaving my old operating system on the old C:\ and installing all my programs into the new harddrive. I have two questions about this:

1) Will my computer become dual-boot which i DONT want to happen I want the same setup as I have know but with XP installed on the new harddrive?

2) Will I be able to call my new harddrive B:\ as I don't have a 5 1/2 floppy drive installed and would prefer to have things organised and call it that, if not what will my drive call itself as default as I already have A,C,D,Q,R drive letters already taken?
 

Read other answers
RELEVANCY SCORE 34

My computer came with a 10gig hardrive with Windows Me preinstalled. I upgraded to Windows XP Home Edition and have been very impressed it was well worth the £90 I payed for the upgrade pack! I purchased 64MB of RAM to bring my memory from 64MB to 128MB and my computer hasn't crashed ONCE since I got XP! But having two operating systems on one 10 gig hardrive and lots of preinstalled programs such as office has taken its toll and I was warned the other day that my harddisk was nearly full! I deleted all my unnessesary files and managed to get back 1 gig of space but I'm still not happy and would like to get a new 20gig hardrive. It makes more sense to use my recovery disk to return my computer to the way it was when it left the factory and reinstall windows XP on the new harddrive leaving my old operating system on the old C:\ and installing all my programs into the new harddrive. I have two questions about this:

1) Will my computer become dual-boot which i DONT want to happen I want the same setup as I have know but with XP installed on the new harddrive?

2) Will I be able to call my new harddrive B:\ as I don't have a 5 1/2 floppy drive installed and would prefer to have things organised and call it that, if not what will my drive call itself as default as I already have A,C,D,Q,R drive letters already taken?
 

A:Harddisk!

Read other 12 answers
RELEVANCY SCORE 34

I have an ultraDMA harddisk from compaq. I hope to know what is the ATA and RPM value of my 20GB drive. Is there some software that I can use to check it?
 

A:Harddisk

The only 20 GB HDD I could find on the Compaq site is 20GB Ultra ATA 100 Hard Drive (7200rpm)
251974-B21

This was at http://www.compaq.com/products/desktops/options/options_storage1.html
That doesn't mean that there aren't more. The way to know, for certai8n, is to open your system up, and get the part number, or full specs from off the HDD case itself.
 

Read other 2 answers
RELEVANCY SCORE 34

Hey can anybody tell me which is the best harddisk drive for which i should go??????????I need atleast 250 gb or more of diskspace so suggest me the best HDD with their latest price ????????Thankyou.
 

A:Best HARDDISK

Get Seagate 500GB SATA-II

125bucks.
 

Read other 23 answers
RELEVANCY SCORE 34

I have an 80GB IDE Hitachi HD which was formatted NTFS on my computer running Win 7 Ultimate. My problem is that when connected to my computer via external Sharkoon Drive link USB adapter, it is not shown in Windows Explorer but is shown in Device Manager as USB Device and in Computer Management it is shown as ?Disk 1 ? Not initialized? and when clicking on to initialize, an error shows as ?This device not ready?. Same occurred on another PC running Vista Ultimate. Strangely, when connected to IDE inside PC it works perfectly. Can anyone help please?

ASUS P5GC-MX/1333 MB
500GB sata Hitachi HDD
2GB Ram
3.2GB CPU
Windows 7 Ultimate

A:USB Harddisk

Does the USB adaptor work correctly with any other drive?

Read other 4 answers
RELEVANCY SCORE 34

Hello,
a week ago i transferred a list of archived files to my mp4, then the light went off ,when it came back, i can't find the archives on the partition , nor the mp4

also some sound files disappered from the mp4, also files are occupying space whether on the hard disk or the mp4

i tried to show hidden files, but i still can't find the files

so what's wrong ?? , how can i get the files again ??? because the computer shows that they are still occupying space

thanks in advance

Best regards,

A:HardDisk & MP4

  
Quote: Originally Posted by Mitooo


Hello,
a week ago i transferred a list of archived files to my mp4, then the light went off


Hi.

Does that mean you lost power to your computer or drive?







  
Quote: Originally Posted by Mitooo


because the computer shows that they are still occupying space


If you lost power whilst transferring, there is a good chance some of the files will have become corrupt.

Read other 5 answers
RELEVANCY SCORE 34

Hi which would be the best free hardrive checking tool that would tell me if something is failing or is dead

A:harddisk

http://www.seagate.com/support/downloads/item/seatools-win-master/
http://www.seagate.com/support/downloads/item/seatools-dos-master/

Read other 7 answers
RELEVANCY SCORE 34

hi

i have a western digital 160gb caviar blue hd now i want to buy a new one but some questions are bothering me

first is seagate any better than western digital i ask this because 1tb seagate is just slightly expensive than 500gb western digital so should i go for seagate?

second is that if i buy seagate, will it cause any problem to the system having one wd hd and one seagate?

please answer in details would love to hear anything to increase the knowledge

A:help about a new harddisk?

1. you can mix any makes of disks. They are all 'compatibel'.

2. the make does not matter. They are all the same since they all come from the same factories in Thailand. I have a dozen different makes and do not notice any difference.

3. except Seagate - one of those just died on me. The first and only disk that died in my installations.

Read other 6 answers
RELEVANCY SCORE 34

I am trying to setup the 3rd Hard Disk in my CPU. It doesn't seems to able detect my already formated hard disk. Is it possible to have 3 Hard Disk in 1 CPU? If so, how do should I go about it? Do I need to do anything with the Jumper on the Hard Disk?
 

A:3 HardDisk in 1 CPU

Read other 7 answers
RELEVANCY SCORE 34

Hello,

Re: Win98SE - Intel 465 Mhz

The harddisk in my PC is 8 GB of which only 2,56 GB is still available now.
From I similar PC (done away in the meantime) I still have a 8 GB IDE harddisk.
and want to place it in my PC.
Please mind that I have never opened a PC sofar.

a) I don't know to what electronic circuit-cable it must be connected (wondering about serial and parallel)

b) then this second harddisk must somehow be connected to and made visisable to the system (by cables I think; however what cables, new ones or
already present)

When I tried to google this subject I only found items on partitioning etc, not
about how to get and connect a second harddisk inside a PC.
Furthermore I have no idea whether there are special well-known problems
related to having a seond harddisk installed (e.g. very slow system)

Advises will be highly aprreciated.

Best regards,
a.ruiter
 

A:add a second harddisk

This may help http://www.perfectdrivers.com/howto/seconddrive.html
 

Read other 3 answers
RELEVANCY SCORE 34

Hi!Where can i buy sata cabel to my ideapad y700 because i have ssd but i cant connect hdd harddisk because i dont know where to buy the cabel. I only have ssd m.2 .  Please help me !

Read other answers
RELEVANCY SCORE 34

i have an old hdisk on an old pc.
the disk label shows that is 4+ Gigs
when i try to fdisk and format, only half is available
at fdisk options appears to be only 2+Gigs
wtf?
 

A:only 1/2 of harddisk is there!

Read other 6 answers
RELEVANCY SCORE 33.6

my laptop is working fine.But i heard only a sparking type of sound.when i contact the technical person he says that it is a hard disk sound ,and it is normal.so my question is ,is it correct that some noise will be there in laptop hdd.

A:harddisk sound

Dear Customer, Without hearing the sound it is hard to judge but it does not sound like a hard drive from your description. Hard drive noise is usually a rhythmic "click" not a sustained "whirr". That kind of noise comes from a cooling fan. We can test the hard drive in the BIOS. Here is a link to  test the harddrive  HP Notebook PCs - Testing for Hardware Failures (Windows 10, 8)  If  issue remains. and if this is a recent purchase, please contact HP Support again for further assistance. Contact HP Support.You can also Check your warranty Here to verify the warranty status  Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee

Read other 1 answers
RELEVANCY SCORE 33.6

I was thinking about partitioning the hard drive on one of my computers running XP SP3 and installing other Operating systems on them, but I have no clue how to do it Also, I know there's a way to do it with an OS disk, but I have a SP2 one, would using that make a difference partitioning the harddisk?

A:Partitioning a harddisk

I would recommend wiping the entire disk, and starting from scratch using the Windows installer to partition your drive out. What size of drive is it, and what OS do you plan on installing on the other partition?

Read other 4 answers
RELEVANCY SCORE 33.6

Is it possible that a hard disk can be damaged by virus?A computer of a friend of mine has been complaining about her sluggish PC even if had been formatted.The technician said the harddisk was virus infected?The hard disk should be replaced?what do I need to check out first to know the cause of sluggishness?Thanks.

A:Harddisk Is Infected!?

Since the virus is stored at the hard disk when placed,yes
examples are:
-It deletes files needed to run a system
-Tracks down your activity and private information
-It also slows down pcs
and many more......

Did she download any AntiVirus program?
several of these at the same time may be the cause of the sluggishness
especially when they are scanning at the same time

Also,did she got recently infected with a particular virus?
After reformatt of her PC?

Read other 10 answers
RELEVANCY SCORE 33.6

Anyone knows how to make the usb harddisk bootable?

As for the bios side, I already set first boot device to usb-hd.

Thanks.
 

A:Booting from usb harddisk.

Although some manufactureres claim USB "bootablity" right ut the box that not usually the case. I searched for answers to your question and it might involve a little more from your side.

For starters make sure you have the latest version of your BIOS.

You might want to then format and partition the drive and make it a bootable drive in that sense. Either through DOS or Windows.

Also, you might want to copy the same bootable files located in a floppy boot disk (make sure the boot files are the same as the OS your using) to your USB hard drive.

If you still need more "oomph" to this answer check out this site. https://www.codidirect.com/shop/thefactsbehindbootability.htm . Keep in mind that although they are mentioning USB Flash devices, the same technically applies to a USB HDD since it is also classified as a "storage device".

Hope this helps!!
 

Read other 3 answers
RELEVANCY SCORE 33.6

Sir, i've 80 gb harddisk, but unfortunately while i'm formatting it, it shows me only 37.7 gb instead of 80 gb. So, sir please help me urgently to solve this problem.
 

A:problem in harddisk

First, please confirm that the hard disk contains only one partition and that it uses all the space on the hard drive. If that is the case then I would guess that chkdsk has over the years identified (and marked unusable) about half the sectors on the disk. That is unlikely; more likely you are talking about a partition that is only about half the hard disk.
 

Read other 1 answers
RELEVANCY SCORE 33.6

Hi guys, I want to add a second harddrive to my new Elitebook 840 G4 but I'm missing the correct caddy. There is no caddy built in! Where I can find the correct caddy for the harddrive? best regards,Jet Ren Gen

Read other answers
RELEVANCY SCORE 33.6

Getting Error. 2215-EIT Failure. VA boot record read failure.Ensure drive with VA image is installed correctly. how to solve the issue and its urgent Regards, Yogesh Parate - IT Engineer.

Read other answers
RELEVANCY SCORE 33.6

In my system 40GB normal drive is installed with Windows XP SP1.

Now I am moving to 200GB SATA harddisk. But want to know that there is any way we transfered all the data with OS into the new harddisk so that I dont have to install everything again.

I heard about Ghost software but not clear that they will do this thing properly and Windows XP will detect the new harddisk because if there is any major change in the hardware then it not accept it .

And mostly my harddisk is filled, so how much space these softwares required to make the image.
 

A:ATA to SATA harddisk

The harddrive manufacturer should have a utility program to copy everything from the old HDD to the new one. Check their website.
 

Read other 1 answers
RELEVANCY SCORE 33.6

Hi,

I have hitachi 320 Gb Hardisk and it got bad sectors i tried windows chkdsk but its not worked so i am trying to do low level or zero level format .
So i have certain queries please help it to solve them
1.I laptop cd drive is not working so can i use it through usb & how.
2.Does it really solves my bad sectors problem..I have heard that if it stuck in between hadrdisk become useless is it right..???
3.Currently its showing 397 bad sectors on disk surface according to software Hard Disk Sentinel

Operating System Win 7

A:Bad Sectors on Harddisk

Currently its showing 397 bad sectors on disk surface according to software Hard Disk SentinelHi -This program is not one that I am familiar with, but it sounds like many Registry Fixers that show 200 problems, and say" for $50 we can fix these" I would be very careful about believing all that this program is telling you about your system !!The Hungarian or German company behind this program seems to offer very little support to their program, and also seem to want your money -Run chkdsk /r first and see if the report is the same as this HDS program reports to you, as your inbuilt diagnostics are usually better than some 3rd party programs -Method 1: Run As Administrator from shortcutUse this method and type chkdsk /r at the command -Thank You -

Read other 6 answers
RELEVANCY SCORE 33.6

Hey there

I'm having a weird issue with booting up my computer and I'm hoping to find a solution that does not involve reinstalling windows completely. Might come to that, but first I'm looking for other issues.

To give some context:
A few months ago my primary harddisk started failing. I acquired a new harddisk, installed windows on it and it has been working fine.

When I boot up the computer, I can select between the old and the new windows installation and I've simply been using the new one. I've left the old harddisk plugged in as I had some data on it I wanted to salavage and then I just left it there. I've gotten the data of it and have had no reason to unplug it.

Recently, however, I wanted to unplug the old harddisk as there has been some issues with hangups and I had a suspicioun they were caused by windows (for some reason) reading from the old harddisk.

When I unplugged it I got a "Bootmgr is missing" error and could not boot up. Thus I need to have the old harddisk plugged in in order to boot up windows.

WHich is annoying, as I think the old harddisk is the cause of the performance issues I've been having.

Obviously the new harddisk has not been made bootable by installing windows on it. The old harddisk was plugged in when I installed windows, so that's likely the cause of it (for some reason...?).

Is there any way for me to fix this without unplugging the old harddisk and installing windows again? I'd rather ... Read more

A:Cannot Boot from Harddisk

The Windows installer will put its boot-up code (the bootmgr) on the primary hard drive regardless of the drive that Windows proper is installed on. You can repair this by booting your Windows 7 DVD and running the Startup Repair tool. See Microsoft's how-to article here. Make sure that the original disk is unplugged before attempting this repair.

Read other 7 answers
RELEVANCY SCORE 33.6

hi,
am using HP dv2500 notebook,it has vista home premium OS , but i formatted with vista business . The problem is my hard disk is hitting , why and how to resolve it. and any problem if counties using.
 

A:why my harddisk hitting

Do you mean your hard drive is making a tick tick sound ? ( what do you mean by 'hitting' ?) If you hard drive is making a ticking sound, then you should look into getting a new hard drive.
 

Read other 2 answers
RELEVANCY SCORE 33.6

Hey,
Does anyone known where I can find an up-to-date database of all existing harddisks sorted by manufacturer or type.
Thanks
Frank
 

Read other answers
RELEVANCY SCORE 33.6

Hello everyone! Just got a little question.

I'm trying to upgrade my harddrive I currently have 4G and i just purchased a new 15G HD. I used the program HDCOPY to migrate my data and OS to the new HD. Then i noticed that my new HD also copied the size of the old one and i believe that i formatted it first and i believe it was 15GB before i copied the old HD.

What do i need to do? Do i have to use another program? Do you know any? or there's just one thing that I need to do to get my original size back?

Thanks
 

A:Copy Harddisk

Hi NavigatorX
I have never used hd copy but from this site it looks like there are two different modes of copying. One uses a sector by sector exact disk image (which is what you have done.) The other mode does a logical file copy and leaves the partition table alone. I think this is their

site.http://212.223.28.218/default.htm

I use a program called file copy which I run from windows. I think it came from ontract with an IBM drive. You may also want to consider using a program like partition magic. This will get your partition restored back to it's original size and keep the data as is.
 

Read other 1 answers
RELEVANCY SCORE 33.6

I have a laptop HDD in an enclosure as an external drive & have had it for about 4 months. It uses usb port. I was using my computer & the hdd was working fine when suddenly as i was downloading something it could not finish dloading because it said the (already written) files could not be detected. Then i disconnected the cable & replugged it & the green light turned on in HDD but it still wasnt detecting it. Then i thought maybe something was wrong or stuck in hdd so i took it out of the enclosure & everything looked fine so i put it back & when i went to plug it in a error showed at lower right of the screen which said that the port hub had a power surge & to disco the hdd & click reset. (Also the green light didnt even turn on this time.) So i did. Then i thought i always used only one end of the usb cable (Double header) so i didnt get why it didnt work but i went ahead & tryed using both heads of the cable & still again said the same thing. I always had enough power so i dont get it. I plugged in my ipod into the usb port & it works good. What should i do?
 

A:HardDisk Problem

Read other 16 answers
RELEVANCY SCORE 33.6

Hello! can anyone help me to solve this problem please?
i want to resize drive C: because it too small. is there any software to deal with this problem? right now i'm using window 7 with system type: 64 bit.

A:need help for resizing harddisk

Paragon Partition Manager v10 works well with Windows 7 x64

Read other 3 answers
RELEVANCY SCORE 33.6

my harddisk size is 20 GB.i m using only 3 GB of it.BUt it still shows 16.65 GB used whereas I m using only 3 GB. I checked all the contents of my hard drive.It is only 3 GB. I restarted my computer also but still it doesnt show any change.Cleared all the history and deleted all the temporary files but still cudnt get out of this.
 

A:Showing more used harddisk than actually used

Read other 9 answers
RELEVANCY SCORE 33.6

Hi,
 
i have a Problem with a System that i don't know how to fix. Every time I start a programm the Harddisk runs with 100%. CPU and Ram are normaly.
The space is half fulled (500GB). It's an Acer Notebook with Windows 8.1 and now it is upgradet to Windows 10. I call Acer and they told me that the
Problem is a Microsoft Update that possibly comes in when Windows 8.1 was aktiv.
Does anyone know thomething about this update?
 
Thanks for help,
 
Aitora
 

A:Harddisk runs by 100%

Please download and install Speccy to provide us with information about your computer.  Clicking on this link will automatically initiate the download. 
 
When Speccy opens you will see a screen similar to the one below.
 

 
Click on File which is outlined in red in the screen above, and then click on Publish Snapshot.
 
The following screen will appear, click on Yes.
 

 
The following screen will appear, click on Copy to Clipboard.
 

 
In your next post right click inside the Reply to Topic box, then click on Paste.  This will load a link to the Speccy log.
 
 

Please download MiniToolBox to your desktop.
 
Right-click on MiniToolBox.exe and select Run as Administrator.
 
You will see an image like the one below.
 

 
Click on the following checkboxes only:
 
• List last 10 Event Viewer log
• List Installed Programs
• List Users, Partitions and Memory size.
• List Minidump Files
 
Click on Go to start the scan.  Once it is finished highlight the text, then copy it and paste it in your topic.

Read other 1 answers
RELEVANCY SCORE 33.6

Hi,
 
Toshiba L750, core i5 - win-7 64bit installed. 4gb ram, 600gb HDD,
50gb os, 250gb, 250gb partitions. 8gb Virtual memory on 3rd partition.
 
Used sparingly and working fine until a few days ago. I heard some faint whirling sound (probably the HDD) and in some time the OS crashed.
It went into an infinite loop of shutting down and rebooting trying to recover the system.
 
At some time, I chose command prompt and ran chkdsk on all the partitions chkdsk /f /r
 
It seemed to work, although the computer was only half as fast.
 
After a couple of boots, I only get a blank screen and a cursor at left hand top, post the bios screen.
 
Has my harddisk crashed? If so, how do I get it working back, either with the same HDD or another one
The data is not really important to me ( I have a back up on my desktop)
 
Thanks in advance for your help

A:Has my harddisk crashed ?

Yes it sounds like it.  Here is a video showing you how to replace it.

https://www.youtube.com/watch?v=svTUrXrAa1U

Read other 15 answers
RELEVANCY SCORE 33.6

I install windows RC 7100 this afternoon and amazed by it stunnishing graphic but it seem to have a problem, thats is i cannot see my original local disk (D/) in my computer. i got all my music stored in that partition.
Actually i do a dualboot and have vista ultimate in (C/) and i installed Win 7 in partition (J/). But when i boot into Win 7 it Drive letter change from (J) to (C/)and the original (C/) that stored vista ultimate change to (D/)... And the weird thing is that the original pertition disappear from my computer....

how to make my partition (D/) to be shown on window 7 ?

for information, i didn't installed any OS in this partition, it just stored all my music and picture and some games.

Thank for any kind reply.
 

A:cannot see harddisk D:/ in my computer...

Read other 16 answers
RELEVANCY SCORE 33.6

Hallo,
 
my laptop, Compaq presario, crashed 2 days ago.
 
I took of the harddisk and i put another one.
 
I installed the windows home premium again , everything is working perfectly, only the sound.
 
The icon is there down in the toolbare and when i play music or something with sound, i see that there is  little bit of movement , but i hear nothing.
 
No sound comes out, i tried almost everything and still nothing.
 
who can help me please?? you are my last resource.
 
Regards
tanya

A:harddisk crashed

When you say 'everything' what did you try?
Did you try updating the drivers?
Did you make sure the volume is full from the speaker icon in the taskbar?
Did you make sure no sounds are muted when you click on mixer?
Are you using external speakers/headphones?

Read other 17 answers
RELEVANCY SCORE 33.6

Hello, My laptop's hard disk and I dont even have a recovery disk.I was wondering how can I activate the windows if I do a clean install using a Win 8 image?There no key label on the back of the laptop either.PLease help guys. Thanks.

Read other answers
RELEVANCY SCORE 33.6

Hello Support, i wanted to know how i could replace the harddisk in my laptop. but i cant find the manual. Help is appreciated thanksPeter

A:Replace harddisk

As we have properly understood your issue you want to replace your hard disk in  your laptop for this please follow these steps: Turn the computer off and remove the back panel. Look for any screws securing your drive to the laptop. Lift the old drive up about 30 or 45 degrees and pull it out.In its place, install the SSD and put the back panel on.Nitin singh guleria

Read other 2 answers
RELEVANCY SCORE 33.6

Hi good people, I have been using my external drives full of office folder, but this morning I have found all of them with .exe extension and I cant access them at all can some help me to access them and recover my folder.Thanks in advanceEDIT: I moved your topic to a more appropriate forum ~ Elise

Read other answers
RELEVANCY SCORE 33.6

Hi, sorry this is kind of a long post, please bare with me.

I've got this problem with my harddisk being really slow. Started around the end of june. My mom woke up, turned on my computer, and it wouldn't boot, because it was waay too slow. It would do a split second of accessing every 2 seconds. Decided to do a format. So I did a quick format on C (At the time, I had a C partition for windows, D partition for my own data, and 3 more partitions for slackware). During the windows installation, the harddrive started doing it again. So I did a full format instead, and that worked fine.

Anyway, the computer worked fine for a couple of days, then I went on vacation. Came back now, and it started giving me the same problems again after a day. This time i deleted ALL my partitions and created 2 new ones, C and D. Worked fine again. That was yesterday. You can probably guess what just happened today.

Computer was working fine, till i had to reboot. Same problem. This time though, once the loading screen for windows is finished (after a while) the computer reboots. I tried rewriting the MBR through windows repair console. The first time it said there were errors, but it fixed them up. That didn't seem to fix the problem.

I then decided to check the maxtor website (My HDD is a maxtor 80gb diamondmax 9). Found the tool "powermax", and decided to give it a go. When I tried it out, it said "failed to load dos, press any key to retry". I tried using... Read more

A:Harddisk REALLY slow

I think PowerMax is right approach, its possible the drive is failing.

How did you create the PowerMax floppy? You need to save the file you download to your hard drive then run it to make a bootable floppy. Do not save the file directly to the floppy. Or your floppy drive is toast.

You can also download an ISO CD image of PowerMax and burn the image to CD.
 

Read other 3 answers
RELEVANCY SCORE 33.6

Hi,

I am getting following warnings via Crystal disk info. Please help how to resolve them:

http://img821.imageshack.us/i/hdderror.jpg/
 

A:Harddisk error Please help

Read other 10 answers
RELEVANCY SCORE 33.6

I want to set a password to my Harddrive of computer. I also do not know how does it help to keep hard drive secure.
Also please suggest a freeware for folder lock (other than folderlock software).
 

A:Harddisk password

this is set via the bios
as the PC starts it should flash on the screen for a few seconds how to get to the bios/setup
often at this point you press a key to enter
depending on make an model of your PC
could be <F2>or <F10> or <Del> or another key

In the bios will be a section, probably security to set a bios / harddrive password
in some cases just setting the bios also sets the harddrive
BUT
if you forget the harddrive password - remember if you forget the password , you will not be able to access the harddrive , even if you put it into a different pc
 

Read other 1 answers
RELEVANCY SCORE 33.6

hi
At present I am using a hitachi 80 GB SATA hard disk.It is so insufficient so I am planning to buy Samsung 500GB SATA.Now if I add the new HD what would happen to the previous one?(80 GB hitachi).Will it remain or replaced by the new one?Let it is possible to add the new one with old one(80+500=580) then reinstalling the operating system(xp sp3) is reqired?
 

A:New harddisk question

Read other 12 answers
RELEVANCY SCORE 33.6

I have windows XP professional on a 40GB harddisk, but I can't get it to boot up! I'm sure it has something to do with the MBR. The computer is an old compaq, with a floppy A: drive that does not work!
I'm totally new to this sort of problem, so I'd be really gratefull for clear instructions on how I can get it up and running again.

For example I found a download for a DOS that I can use via the CD drive. However I haven't a clue as to how I can use it to boot up or fix the MBR, if it is indeed possible!

Grateful for any help, advice or suggestions.
 

A:No boot from my harddisk

Read other 11 answers
RELEVANCY SCORE 33.6

Hi bro, just a question which company's internal hard disk is good and very stable. I have been using seagate for long time, i believe company's reputation has gone.I replaced my 320 gb hdd for several times , even though company gives 5 year warranty but no use.I was replacing my hdd continually and so many times data losses,recently just a weak back my hdd has come from replacement, just with in 5days of time again status of hdd has degraded. I'm really fed off with this hdd(seagate) prior to this same case with 250 gb. So which internal hdd is best(cost effective).

And please let me know that any incompatibility of my system is causing frequent hard-drive failure , I will provide with full specifications of my system. Myself i built this system.

Core2duo E7300
GA-Ep43(gigabyte mobo[no display board])
4gb(2+2) 667mhz
320gb seagate hdd ( 2008 june)
d-link wireless desktop adapter
Nvidia 9800gt of 1gb DDR-3
LgDVDrom
I-ball gaming cabinet with 600watt smps.

Cooling-additional 4 powerful fans and default 3 fans

regards
sandy
 

A:internal harddisk

If it's a computer I advice getting an external hard drive, you can get 1TB for like $40, and internally I'd go with Acer, of all the Acer computers I own, none of the hardware has ever failed. Yet, with HP, the HDD, mintor, CPU, fan, and some other stuff, all broke in less than a year.
 

Read other 2 answers
RELEVANCY SCORE 33.6

Hello, my friend recently formated one of his hdd (the main), he put windows XP on it.. evreything works fine... on the bootup it finds 2 hdd.. so evreything is normal... same thing in the bios... but once he goes on my computer there's only one hdd, only the master.. it looks like that it doesn't find the slave. You guys have some advices?? Please let me know as soon as possibile.

Sincerely
Massimo
 

A:Problem with Harddisk!

Read other 12 answers
RELEVANCY SCORE 33.6

Hi Guys,
My comp's been having this very wierd problem lately.

My harddisk shuts down automatically.Everything's fine one moment,then suddenly the orange light on the cpu(which shows hdd activity)goes off and the monitor also shuts down(the green power indicator on it turns to orange). Although the green light on the cpu(indicating power supply)still remains on.Now,in this state, even if i try to press the cpu restart button,nothing happens.I have to cut the power supply from the wall socket and then restart the pc.

Now,this situation happens randomly.It's not overheating probably because it can happen anytime after switching the pc on,10 mins or 2 hours.But another thing is that this issue happens only wen i'm watchin a movie saved on disk or playing a game like Counterstrike etc.I can surf the net or listen to music for hours and nothing happens.Even while watching a movie or gaming,it won't happen always. Sometimes several days go by before anything happens,on other days it happens every 5 mins.
I've opened the cabinet and interchanged the power and data cables between my cd-drive and harddisk,to check whether anything's wrong with the cables.But still da same problem.i've even tried using different players to watch the movies(VLC,Media player Classic),but no use.I observed the cpu usage during movie playing and it hovers around 15-20%.

My pc's config is AMD athlon 2400+ xp,256mb ddr,onboarg graphics suspport,samsung 80gb 72... Read more

A:Help: Harddisk shuts down...

Have you checked your hard drive for bab clusters?
Also what kind of PSU do you have?
 

Read other 3 answers