Over 1 million tech questions and answers.

Updating BIOS how and when

Q: Updating BIOS how and when

So lately i have been thinking of updating my BIOS now first of all how do you know when its time to upgrade and how does one go about doing this process. I have the Asus P8H61 MLE/CSM. Any insight or help is appreciated

RELEVANCY SCORE 200
Preferred Solution: Updating BIOS how and when

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Updating BIOS how and when

Unless there is a specific problem you're trying to fix, and you know for certain that the BIOS upgrade will fix that, do NOT do a BIOS update. This is nothing like apps version updates or driver updates. If something goes wrong during the BIOS update, your machine is turned into an electric brick.

My advice to folks is to NOT do any BIOS updates unless you are sure of the following:
1) You have a way to store off the current working BIOS code to a media that can be used to restore it
2) You have a way to restore that saved BIOS code if the update goes badly.

That said, ASUS board I have used in the past had something known as EZ-flash (or something like that) that involved you booting with a special key combination that then launched a BIOS update utility. You could then stick in a diskette or a USB stick and save off the current BIOS. IF that utility still exists with your motherboard, it will be explained in the manual that came with it.

Read other 2 answers
RELEVANCY SCORE 53.2

I have downloaded the bois from the lenovo official site. But when I am updating its show the error message not for this notebook . I have lenovo g500s laptop .other people also facing same issue for the same laptop .please help ...Thanks in advance...











Solved!
Go to Solution.

A:Lenovo g500s bios updating problem. While updating...

Pan761,
 
The correct version of BIOS update has been just released - BIOS Update for Windows 8.1 (32-bit, 64-bit)
 
Now there should be no problems with it's  installation.
 
Regards,

Read other 1 answers
RELEVANCY SCORE 49.6

AMD Dual Core processors - updating BIOS?

how do you do this?

thanks a lot
 

A:AMD Dual Core processors - updating BIOS/flashing BIOS?

Flash a BIOS?
You need to download the update from the motherboard manufacturer. Then follow the directions in the readme file that usually comes with it.
 

Read other 3 answers
RELEVANCY SCORE 49.6

Hi. I have a dell inspiron laptop. My problem starts when i tried to update my bios from a07 to a15. While the update is running my laptop screen suddenly turned blank but my laptop is still on. What should i do?

A:Bios update fail. Blank screen while updating bios

Please check and see if you can get into BIOS. By the way list Dell model number and version of window. Ex: Dell Inspiron 3543, windows 10
1. Power off computer
2. Power on computer, quickly start tapping F2 key continuously. Hopefully, you'll be able to see BIOS screen.

Read other 1 answers
RELEVANCY SCORE 49.2

hi there, i am fixing a friends old computer and the hdd was stuffed so i got a new maxtor diamondmax 9 for it. although once installing it i found out that it would only run in udma2 mode (checked it in another computer and it ran at full udma6)
so i suspect that the current bios cannot support udma5 or 6, so i am looking for a bios upgrade for it.
the bios string is 6A69RPRDC-00, the number on the actual motherboard is 35-C960-00-05
thanks for any help, i am really hoping i can make this board work at udma5 at least and not have to settle for udma2.
thanks again
-Moltenz

ps. i just found this
AM-960
04/19/2001-i815-ITE87X2-6A69RPRDC-00 ITE87X2 + Winbond-W39A
at http://www.plasma-online.de/english/identify/serial/mainboard/mb_aristo.html
if that is any help.
 

A:help with updating bios. cannot find bios upgrade - 6A69RPRDC-00

WOW..............

Old Machines.....(just like me... but can still perform to the max lol)

I your Bios has the option of udma up to 6 then generally the bios supports the Mode! and your problem is that the HDD does not support the mode (cant remember if you said it does).

You are probably using wrong criteria for bios upgrade search.
Try WWW.driverguide,com

You Need the MB's Manufacturers Name or at least the MB Chipset and bios Manufacturers Name as well. go to the Computers muanufacturers website (you probably done that already) and search model.

otherwise Download a System info utility from Tech Spot, I use SiSoft Sandra or AIDA32.. (sandra might cause bluescreen on older machines).. Aida problably will have link direct to bios update site. hope this was of some help
 

Read other 9 answers
RELEVANCY SCORE 49.2

Hello.I need to update BIOS on my notebooks.I used my second computer to creat  a BIOS recovery drive on my USB.I used this way:Recovering the notebook BIOS using an external storage devicehttp://support.hp.com/us-en/document/c02693833 I download recommended version:sp62234.exeAfter step "5. In the Location to Save Files window, click Change."The HP System BIOS Update Utility DOSENT opens and i have 2 errors: 1.IHISI: Get support mode fail in SMI!  2. BIOS did not support InsydeFlash!  Please help me.

Read other answers
RELEVANCY SCORE 46.4

i updated my bios and the fan is now very loud on it for some reason , im not sure why here's my belarc advisor list if anyone can help me get the fan back to normal that would be very helpful!

Windows XP Professional Service Pack 2 (build 2600) Packard Bell NEC SPIRIT 550
Enclosure Type: Desktop
Processor a Main Circuit Board b
2.93 gigahertz Intel Pentium 4
16 kilobyte primary memory cache
1024 kilobyte secondary memory cache Board: Packard Bell NEC
Bus Clock: 133 megahertz
BIOS: Phoenix Technologies, LTD 6.00 PG 07/15/2005
Drives Memory Modules c,d
80.02 Gigabytes Usable Hard Drive Capacity
63.95 Gigabytes Hard Drive Free Space

COMBO IDE5232CO [CD-ROM drive]
SCSIVAX DVD/CD-ROM SCSI CdRom Device

Apple iPod USB Device [Hard drive] -- drive 1
ST380011A [Hard drive] (80.02 GB) -- drive 0, rev 8.01, SMART Status: Healthy 480 Megabytes Installed Memory

Slot 'A0' has 512 MB
Slot 'A1' is Empty
Local Drive Volumes

c: (NTFS on drive 0) 80.02 GB 63.95 GB free

Network Drives
None detected
Users (mouse over user name for details) Printers
local user accounts last logon
ashley 12/4/2005 4:57:52 PM (admin)
local system accounts
Administrator never (admin)
Guest never
HelpAssistant never
SUPPORT_388945a0 never
Marks a disabled account; Marks a locked account None detected
Controllers Display
Primary IDE Channel [Controller]
Secondary IDE Channel [Controller]
SiS PCI IDE Controller None detected
Bus Adapters Multimedia
VAX... Read more

A:BIOS HELP!!!!!! fan very loud after updating bios

Read other 16 answers
RELEVANCY SCORE 46.4

hiiam new to this so forgive me if i have posted in the wrong placei own an hp 250 g4 recently i updated my bios and after successful update i tried to enter bios and its asking for admin password but i never has set any admin passwordit says system disabled  [ |  87228416] i can normally boot into my os but cant enter the bios plz help me 

A:asking for bios password after updating bios

When prompted for password try 38180438

Read other 2 answers
RELEVANCY SCORE 44.8

My motherboard is http://www.prlog.org/10116200-new-a...-motherboard-uk-online-computer-reseller.html

And i cant find the right bios to update it.

any1 know which bios is for my motherboard to update it?
 

A:Updating BIOS

http://www.asrock.com/mb/download.asp?Model=P4i65G
 

Read other 3 answers
RELEVANCY SCORE 44.8

 I did a F10, check my BIOS version is HP Kolvo02.25, 07May 12.I download a 2013 bios in HP support centralhttp://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=vc_113732_1&sp4ts.oid=5232881run it and restart PC, F10 again. When i Flash System Rom, a red label appear 'Removable media is bad or missing'I switch off the PC, press the CMOS button few times. And the results is still similar. I did the instruction as the video instructed, but BIOS did not upgrade either.http://h20565.www2.hp.com/hpsc/doc/public/display?sp4ts.sn=SGH250SGL4&sp4ts.oid=5232881&docId=emr_na...

Read other answers
RELEVANCY SCORE 44.8

Hello,today i  wanted to update my bios (from "P02-A2" to "P03-A3) because i want to use my new processor - intel i7 3770, but after start updating i got sad massage "Rom file size does not match existing BIOS size".I have got a predator g3610 and i was installing it through DOS by using pendrive.What should i do now?

A:Updating bios

P03-A3 BIOS description says:BIOS (for device with Ivy Bridge & USB 3.0 supported) has your Predator the Ivy Bridge microarchitecture? i don't think you can update P02-A2 version to P03-03, the BIOS flash is telling that, different ROM size.

Read other 6 answers
RELEVANCY SCORE 44.8

I asked this question on another website forum and the only answers I got was to buy a newer computer. This is just a spare I am wanting to get running. I have an old Compaq iPaq tower with a Pent III 733MHz processor. It has no floppy or CD rom drive and only supports the slim hot swapable cd rom drives. It has Windows 2000 on it and I am wanting to install Windows XP or a Linux OS via USB. It has Bios ROM (686J5) V 2.08. which doesn't support booting from USB. I am wanting to upgrade to V 2.10 which does support a USB boot but I am having alot of trouble understanding if it's possible to flash the Bios without first installing the files on a floppy and running?? Here is a link to the 3 V 2.10 flash utilitys but I don't know which to choose and the instructions for each 1 are very confusing for me.
http://h20000.www2.hp.com/bizsuppor...eriesId=96490&swLang=8&taskId=135&swEnvOID=19
There is no clear setup to run and I've tryed the DOS instructions and that doesn't work? Any help would be greatly appreciated.
 

A:Help updating Bios

http://h20000.www2.hp.com/bizsuppor...g=8&mode=2&taskId=135&swItem=PSG_I10480-31135

need the flash utility first
but yes confusing !!
 

Read other 2 answers
RELEVANCY SCORE 44.8

I'm really not sure if I should update my BIOS or not. I'm trying to optimize my Windows 7 x64 and get it updated. I've been following this tutorial, Optimize Windows 7, but I'm unsure weather or not to update my BIOS.

I have an ASUS M5A97 R2.0 motherboard, and I haven't had any problems with it. However, I noticed I'm running version 1006 from 10/17/2012. The latest is 2301 from 3/27/2014 and it improves system stability (not to mention the countless updates and fixes between versions 1006 and 2301).

Plus, there's some chipset drivers for AMD and I've been having problems getting my CCC started.

So... should I update or not?

A:Updating the BIOS?

Read the BIOS notes for the fixes it provides. I do not recommend updating the BIOS unless it has a fix for your issue.

Read other 9 answers
RELEVANCY SCORE 44.8

Will updating an A-Bit BIOS to the latest BIOS remove any Virus that is in the BIOS. And what BIOS Viruses are out there and what can you do to get rid of them?
 

A:Updating BIOS

If your BIOS is infected overwriting it with the latest version of the real one will overwrite the problem. Most of these however render your PC useless to the point you cannot even boot. SOme of the names are Chernobyl, PE_CIH, Win95.CIH, Win32.CIH, W95/CIH.1003, CIH.Spacefiller
Most AV sites have removal tools
 

Read other 1 answers
RELEVANCY SCORE 44.8

I want to update my BIOS with a .bin file. I have extracted and saved to a bootable disc. But when prompted in MS-DOS i have no idea what to type in to JUST open the .bin file that needs to run so i can update the BIOS. Thanks a lot... Dave
 

A:Updating BIOS

Read other 14 answers
RELEVANCY SCORE 44.8

How do i update my bio i can't seem to find anything to help me

A:Updating the Bios

@Dctchdt,If the original OS was WIN 7, the BIOS is tied to that.  The is "NO" WIN 10 BIOS.

Read other 1 answers
RELEVANCY SCORE 44.8

i just got a new ram for my pc. and the ram speed 2400MHz but my pc default 1333 MHz so i tried to chang the clock timing and the voltage of the ram but my BIOS is so old it didnt alow me to do that. is there any other way i can get to change my ram speed that i paid for.

A:updating Bios

kerlos28 You can NOT clock the RAM at speeds your processor will not support, and without specific model information of your PC, I can not see what speeds it will allow. So please follow these instructions:  Finding Your HP Product Model Number | HP® Customer Support We can proceed once you provide the information.Thanks

Read other 1 answers
RELEVANCY SCORE 44.8

I am not sure and want to know if I need to update my BIOS.

This laptop is 2 years old, and is running all well. I haven't had any crashes etc. But I am wondering if updating the BIOS will prolong my machine's life.

Here are some screenshots which give basic info. about the laptop in question.







PS I didn't like the idea of paying more than 20 quid for their yearly subscription.

A:BIOS updating

Unless the BIOS update corrects a problem that you're having, then I wopuld leave well alone. These updates are usually to enable the motherboard to support newer hardware such as processors. Since yours is a laptop, you wouldn't be able to upgrade anyway, so I would leave it as it is.

Read other 5 answers
RELEVANCY SCORE 44.8

I am thinking of upgrading my pc by putting an Intel E8200 cpu with an ASUS P5E x38.

Im just wondering if this is as straightforward as I think because I read somewhere that most of the x38 motherboards are not updated for the latest E8+ cpu`s.

If this is so, does anyone know how to resolve this problem?
 

A:Updating bios

Read other 6 answers
RELEVANCY SCORE 44.8

Im upgradeing my asus mobo p5b to the newest bios which is P5B-0701

now how do i install it some one told me about the utlities im on xp pro sp2 please help me thanks i need to upgrade it soon
 

A:HELP updating bios

Bump.......
 

Read other 3 answers
RELEVANCY SCORE 44.8

1.Please use the prepared boot disk to boot into DOS mode. Then, type in the following commands?

afudos /i For example, afudos /ip4c800b.rom,


refers to the fullname of the BIOS file. The following shows the procedure of BIOS refreshing.
_________________________

How do I find out the fullname of my BIOS file? I typed in the given one, but it said error: can't open rom file.
 

A:Need help on updating my BIOS

The file is on your floppy. Just look at the contents with the dir command or browse the thing in Windows or whatever.
 

Read other 2 answers
RELEVANCY SCORE 44.8

I hope this is the right area to post my topic in but I have a problem

I Need help with updating my BIOS but don't know where to go, or what to do.

I don't want firmware from ESupport because they charge $40.00 an upgrade and I can't afford to upgrade my BIOS, and keep upgrading

I use a Soyo computer

This is what my BIOS agent said:

Award Modular BIOS v6.00PG

03/08/2002-8361-686B-6A6LNS2AC-00

K7VEMPRO-2CA4

VIA 82C3112 rev 0
 

A:I need help with updating my BIOS?

You go to the Soyo website and download the BIOS for your exact model of motherboard (looks like a SY-K7VEM Pro). Soyo also provides instructions how to actually flash the BIOS.

Do you really have to upate your BIOS? One false step and your motherboard may become a useless slab with colorful bits on it.
 

Read other 1 answers
RELEVANCY SCORE 44.8

Hi, i've been told a bios update might stop my pc crashing when my belkin wireless is plugged in. only thing is i'm confused as to how to do this!
System analysis says i have american megatrend BIOS, a asus motherboard SE Deluxe, but my boot up screen says Fast track Promise technology.
where do i get the right bios update? which oen will eb the right BIOS? and is it likely to stop the random crashing?!
questions, questions, questions!
Please help/advise!!
thanks,
Mikelo
 

A:BIOS updating

Read other 7 answers
RELEVANCY SCORE 44.8

Mod Edit:  Split from http://www.bleepingcomputer.com/forums/t/580653/windows-81-black-screen-with-cursor/ - Hamluis.
 
I got the same thing except I'm pretty sure a virus wiped out the BIOS (Basic input Output System) I got a update Bios based on my model on a USB and am currently trying to figure how to load it through EFI Shell, which is simular to DOS i guess

A:Updating BIOS

Please explain what is going on with this computer.
 
Does it run at all?
 
What makes you believe your BIOS is infected?

Read other 1 answers
RELEVANCY SCORE 44.8

Hey everyone how do i install my latest bios from my manufacture, i cant get the flash bios to work?!!? heres a link to my mobo. The flash thing to install bios is like a comand promp but it starts then closes itself! what can this be? thankyou in advance
 

A:Need Help Updating BIOS

be extremely careful when updating the BIOS. Not completing the BIOS flash will render your motherboard a paperweight. You will then have to send it in to get the BIOS reburned on the EPROM.

Most manufactuers have explicit instructions on their websites for updating BIOS files. There is a dos file to do this usually. BIOS updates cannot be done through windows. Use your floppy drive.

basically you type the name of your flash program, followed by the name of the new BIOS file.

LET IT RUN ITS FULL COURSE. DO NOT INTERRUPT.

also SAVE your OLD BIOS. Most BIOS flash programs have this option. Save it to another floppy disk. You might need it if you run into problems.
 

Read other 7 answers
RELEVANCY SCORE 44.8

Question,
I am upgrading my system from Windows 98 to XP Pro, Full (clean) install. I plan on wiping everything out on the hard drive and start from scratch. Is it necessary to update the BIOS, and if so, where do I find the update? The computer I am upgrading was put together by a local person and he is no longer around, so there is no manufacturer's website to go to and I am not for sure who made the motherboard.
 

A:Updating BIOS

It is a good idea to run the Compatibility wizard on the XP Disc prior to installing . . it will tell you what hardware and software is compatible. ( Insert the XP disc while the system is on and choose "Check for Compatibility" )

I like to update to the newest BIOS when I Upgrade a pc to XP, but it is not a exercize to be undertaken lightly . . I use a UPS to prevent a power loss from converting the machine into a trotline weight . .

You can download and run the Belarc Advisor or Everest to find out what MotherBoard you have ( and a lot of other details about the system as well )

Good luck . .
 

Read other 3 answers
RELEVANCY SCORE 44.8

I  recently acquired a gem of ancient tech-- it is a used hp envy 17-1191nr--  a few changes from stock, however is that it has a new 250GB SSD, 16GB of RAM, and is running windows 10... but one small problem...I think it needs a BIOS update because of the behavior it has when I leave it in sleep mode, it doesn't like to wake up.I have a habit of leaving it asleep but the boot from shut off is not long at all (about 15 seconds or less) What happens is that the keyboard backlight comes on and it seems to be trying to wake up but fails and I think the speakers make a slight pop noise, and then it keeps repeating thatMy 'fix' is to remove battery and power and then re-insert and it starts up again, no problem.Reading on-- I read that it would likely be either the BIOS or the battery. Tonight I did a test with a spare battery and same thing happens.. my co-worker and he said it may be the BIOS too.  My other concern is seeing that the date on my BIOS is also from 2010 (F.1B) and the newer one from HP's website is F.1D from 2011... and that my BIOS is booting from Legacy rather than UEFI.... I'd like to know how to update the BIOS, because I tried changing the BIOS boot order and it doesn't seem to work to get it to boot to CD or USB, when I attempted to change the order, it just tells me to remove CD or USB and press any key to boot normally. This is my system info, if anyone knows what I need to do... I don't plan to jump the gun here and risk brick... Read more

Read other answers
RELEVANCY SCORE 44.8

I recently put in a new motherboard, a new cpu, and new ram. the computer POST is fine but when it gets to the load windows screen, it just reboots. there is no error, just flashes to a blue screen, then restarts the computer and when it restarts it comes to the screen asking me to choose between restarting in last known good configuration, or in 3 different safe mode options. all of them just repete the process. i tried reinstalling the windows from the boot cd and it reinstalled it fine with no errors, but when it restarts the computer it still wont get passed the load screen. Someone sugested that maybe i have to update my BIOS becase of the new motherboard and new cpu. can someone please explain why that might be, what the symtems are of needing a BIOS update, and why it would help me? im just looking for some clarification before i run such a risky procedure. thank you, kevin
 

A:Updating BIOS

Did you reinstall windows after fitting that lot? If not, thats your problem.
 

Read other 41 answers
RELEVANCY SCORE 44.8

Can anyone set me in the right direction on what I need to do to update my bios? I am running windows 95 4.00.950b on a Compaq 575 Deskpro with 32 ram and a screamin 518 megs of hard drive.

I have run a Compaq Diagnostics Version PC10.19A and it shows these ROM Revisions that seem older than dirt:

System ROM
Revision: 05/20/1998
Family: 486G
Video Controller ROM
Revision: 12/01/1994
Family: V1
Keyboard Controller ROM
Revision: C.7 06/14/1991
Family: K

I downloaded and ran one of those utilities that tell you what you have on your system and it couldn't even recognize my bios and told me I needed to update it so I thought I would give it a try...

While I got you here (and if I need to address this in another thread I will) In my controll panel / system/ Devices /hard disk controllers I have 2 "Standard IDE/ESDI" listings...as far as I can tell they have diferent input/output ranges and IRQ's...I THINK I remember reading somewhere that this could be a problem...any light you can shed on this cunundrum would be appreciated.

Thanks..you guys are the greatest and btw with your help I finnally found that graphics controller I was looking for and it seems like I have a new computer...WOW..."look at the colors man"(Dennis Hopper-Easy Rider)
 

A:Updating BIOS

Read other 6 answers
RELEVANCY SCORE 44.8

I am having problems using a 200gb drive with an older (2002) gateway. I installed the HD and ran fine for a few months, then I got the the disk read error. I used old drive to load windows and reformatted the 200gb drive, and the it worked fine for another couple months.
I have changed IDE cables and tried everything else but updating bios. So I am currently trying to update the bios with no luck.

My bios readout is as follows
bios rev PT84510A.15A.0005.PO3.0203061931 DATE 03/06/02

I went to gateway website and entered my serial number for the update and found the update for 12/2002, not that current. But i tried it and follwed the directions exactly. the floppy would not work, i got the nonsystem disk error.

Any suggestions for properly updating my bios?
 

A:updating bios

Read other 14 answers
RELEVANCY SCORE 44.8

I have a dell dimension 4550 and i was wondering if i have the best BIOS.. i think it was A05 or something like that.. pllz give link if you there is a better one..
 

A:updating BIOS

Read other 6 answers
RELEVANCY SCORE 44.8

I bought a Yamaha CDRW and my system won't recognize it. It was suggested that I upgrade my BIOS to fix this problem. I have an Asus P2B Motherboard and when I downloaded the update, all I got was a Fax Viewer Document, not what I expected. Do I really need to update the BIOS? I am using Win 98 SE.

I have checked all the IDE cables and all configurations.......do I have a paperweight?
Any help would be great!

Rattzo
 

A:Updating BIOS

Depends on how old your bios are. If it's the last chance

Anyway here is link to your motherboard page
http://www.asus.com.tw/Products/Motherboard/Pentiumpro/P2b/index.html

You can just click on the link for the bios and get the upgrade, whichever you want, with or without hardware monitoring.

Have you tried the burner in another machine just ot see if the burner is good.
Differnet cable
Different power connector
Different master slave settings on ide's
 

Read other 1 answers
RELEVANCY SCORE 44.8

How risky is bios updating. asus sabertooth x58

A:Bios updating

ocir, your motherboard site shows that the latest bios is:
Sabertooth X58 1304 BIOS
2011.09.26 update

I would download the update and most bios system updates have a choice to accomplis from booting a disk
or from the Windows OS.
Choose which you want to do,

I have done this lots of times, mostly from Dell but also intel and asus.

Rich

Read other 5 answers
RELEVANCY SCORE 44.8

I hope I'm posting appropriately. I'll try to be brief.

I've been having problems with my monitor lately. Squiggly lines appear around the lower half of the monitor and garble the image. Messing with the degauss and refresh rate seem to have no effect. The effect seems to be random, and from what I have read I assume it's just dying, but there is something troubling me. I ran the troubleshooter (which I don't think I've ever really done) and got to the point where it said I should update my BIOS. When I first had this computer assembled in 2k2, I had a problem which ended up being the BIOS and the folks that put it together updated it and its been that long since its been done. I've since installed a new video card and updated windows a fair amount in that time.

I'm trying not to be too verbose, but I want any helpers that may come my way to have as much info about my situation as possible...

Anyway, whether or not this is the problem with my monitor may not be important. If the monitor is just dying out I probably still need to update don't I? I've read a bit about it and I've downloaded what I assume is the most recent update for my BIOS and the (again, assuming) appropriate "flash" thingy. However, I'm more than a little apprehensive about attempting this on my own without some input.

The folks here helped me out immensely a while back with a browser hijack and the first forum I though of to come to with th... Read more

A:Updating BIOS

My thoughts:
1. The BIOS has been there since 2002, the squiggly lines appeared recently. ergo the BIOS has nothing to do with the squiggly lines.

2. The windows troubleshooters are as useful as tits on a bull.

3. If you are not experienced with BIOS upgrades be warned you can get into real trouble if anything goes wrong - possibly to the extent your PC never works again.

4. The majority of people NEVER upgrade their BIOS and their computers still seem to work OK.

Have a look at the download site where you get v1010 and see what the update is supposed to fix. Unless it says "fixes squiggly line problem" (and I'll bet good money it doesn't) it's not going to help you.

Let us know what kind of monitor and what kind of display card you have, because i think you have a hardware problem.

hth

Read other 7 answers
RELEVANCY SCORE 44.8

Hi all,

My PC seems to keep turning itself on after I power off and apparently a common issue is that you need to update your bios.

My Motherboard is GIGABYTE GA-78LMT-USB3 AMD 760G (Socket AM3+) Micro-ATX Motherboard. Using System Tools I've found out that my BIOS version/date is "Award Software International, Inc. F2, 10/08/2012".

I think I've discovered the correct motherboard on this site

This is how far I've got - unsure what I need, or should download from the options there (and even if I have the right site). Obviously I'm really cautious about all of this so would really appreciate any help or advice?

cheers

Scam

A:Updating my BIOS?

Hi,

Its a good idea to be cautious. Please check on your motherboard to see whether its a Rev. 4.1. If it is, then that is indeed the BIOS to download and install, and that is the correct site.

Regards,
Golden

Read other 4 answers
RELEVANCY SCORE 44.8

Hiya doin' CHILL here, I need to know how to update my BIOS for my E-machine W3623 System. The BIOS is very outdated (7/29/2005) which I think maybe causing certain performance issues I have been having. I at least want to have the most recent BIOS running for the machine (for optimal performance) which I have already looked into (which is the Coconut Creek CR94510J[1].15A.1015 2009). I realize this update MUST be downloaded straight from the manufacturer ONLY or I could risk screwing myself over.

I downloaded the file from the E-machines support site. Problem is, when I try to run it I get the Intel Express Update Set-up screen which comes up and then it says "This program is unable to continue. Internal System Error: This is a programming or internal problem." After that I can't continue and the process automatically shuts down. So now I'm stuck and don't what know to do. Here is some more information about my system:

Operating System: Windows 7 Ultimate 64x
Intel Express Family Chipset 82945G
RAM: 2GB

Also another side question: Is this unit capable of more RAM than 2GB? Thanks in advance and I would GREATLY appreciate any help I can receive on this as I am lost. Let me know if you need anymore specific specs on the system.

A:Need BIG help with updating BIOS

Welcome to SevenForums,

Performance issues aren't necessarily fixed up updating the BIOS. You are running a fairly low-spec PC so I wouldn't expect the performance to be outstanding. What sort of issues are you having? There may be easier way to fix this.

That is the correct BIOS update - how are you flashing the BIOS?

Unfortunately, your machine supports a maximum of 2GB only.

Regards,
Golden

Read other 9 answers
RELEVANCY SCORE 44.8

Hello,today i  wanted to update my bios (from "P02-A2" to "P03-A3) because i want to use my new processor - intel i7 3770, but after start updating i got sad massage "Rom file size does not match existing BIOS size".I have got a predator g3610 and i was installing it through DOS by using pendrive.What should i do now?

A:Updating bios

P03-A3 BIOS description says:BIOS (for device with Ivy Bridge & USB 3.0 supported) has your Predator the Ivy Bridge microarchitecture? i don't think you can update P02-A2 version to P03-03, the BIOS flash is telling that, different ROM size.

Read other 6 answers
RELEVANCY SCORE 44.8

Hi it seems that I have a problem with my SATA II speed settings. Apparently this might be due to a lack of BIOS / Motherboard support for SATA-II - is there a way to check for this? I mean, I can check the BIOS settings, but I dont see any particular reference to SATA-II - Is there a resource to cross reference my particular BIOS generation or type to see if it does allow SATA II? Thanks!

A:Updating BIOS - should I do this?

It seems that my BIOS might not support SATA II If is does not, can I, should I - upgrade my BIOS? (My laptop is about 1.5 years old now - should it have SATA II installed in the BIOS settings?) Thanks!

Read other 9 answers
RELEVANCY SCORE 44.8

Hey, my laptop has been giving me some pain recently with BSODs when exiting Source games. I've also been experiencing performance drops in these games and in others which were all fine some time ago. Steam support suggesting updating my video and audio drivers (which I did) but they also said I should update my BIOS.

I have never updated my BIOS before and want to ask what and where should I get an update for my laptop, how to apply it and things I should be careful about. Also, would this void my warranty?

The laptop is an Acer Aspire 5742ZG
OS Windows 7 Ultimate x86
CPU Intel Pentium P6100
Motherboard Intel(R) 5 Series/3400 Series
Memory 3 GB DDR3
Graphics Card(s) NVIDIA GeForce GT 420M

LE: Also, while we're on the subject, do you have any good reads on BIOS updating and when it should be done? It's unexplored territory for me

A:Need help updating BIOS

Hey, first thing you need to do is type msinfo32 in the Start button search/run box. In the window that opens, look up the field Bios version/date and tell us what exactly you see there. This tells you the version number and date of the currently installed bios. By knowing this it can be determined whether an update is actually applicable.

Bios updating used to be a dangerous business in the earlier days but with better and more user friendly tools its quite OK, as long as you take certain precautions. However, do remember that no matter you do everything right, theres a very small chance that your mobo can get bricked, so the responsibility is all yours.

Not trying to frighten you, just need to be careful and be prepared.

Read other 9 answers
RELEVANCY SCORE 44.8

I want to update my bios to see if that helps my rebooting problems(See thread below). The only problem is, I'm unsure which upgrade is for my bios. I have an AX4TII mobo. When I run the app HWInfo32 I get this info on my bios:

Vendor: Award software international
Version: 6.00 PG
Release date: 01/02/2002
Start Segment: E000
Size: 512 KBytes

This link is to my mobo's site and their bios drivers:

http://club.aopen.com.tw/downloads/...eyword&sel=category&optionfun=typefun&first=1

Which one is mine?
 

A:Updating bios

Read other 10 answers
RELEVANCY SCORE 44.8

I would like to update my BIOS. However, there is no download available for my computer and operating system on the HP site. 













Solved!

View Solution.

A:Updating BIOS

Hello, The BIOS update is available for WIN 8.1 and not yet tested and released for WIN 10 as of now. However you may try updating BIOS using HP support Assistant(HPSA)Download and install from here : http://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html?jumpid=va_r602_us/en/any/psg/pl_ot_ob_ds_pd/hpsupportassistant_cc/dt#.WEY3fdV974Y Also please go through this document explaining how to use HPSA.http://support.hp.com/us-en/document/c03467905  Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee

Read other 2 answers
RELEVANCY SCORE 44.8

Basically I want to flash my Bios, but the thing is... I am not sure which I have to choose! is it all of them? do I choose the latest one? I am lost.

Bios updates: http://www.gigabyte.com/products/product-page.aspx?pid=3863#bios
Motherboard: GA-Z68A-D3-B3 http://www.gigabyte.com/products/product-page.aspx?pid=3863#ov

your help is really appreciated.

(p.s. if I am correct, my current version is F3. Not even listed!)
 

A:Updating BIOS

You only choose one and that is usually the latest one.

That said, are you having a problem that you hope the BIOS update will fix? If not, see the warning:

"Warning:
Because BIOS flashing is potentially risky, if you do not encounter problems using the current version of BIOS, it is recommended that you not flash the BIOS. To flash the BIOS, do it with caution. Inadequate BIOS flashing may result in system malfunction."
 

Read other 4 answers
RELEVANCY SCORE 44.8

Hello!

My OS is Win7 ultimate 32-bit.
I have an Asus P5LD2-X/1333 motherboard. I used to have a Intel Pentium Dual-Core 1.80ghz. Today I installed a Intel Pentium Dual-Core 2.50ghz E5200. It's running just fine, without any software updates. However when starting the PC I get the following message:

Unknown CPU detected. Update BIOS to unleash it's full power.
Fress F1 to continue.

As I said, Windows runs just fine. But I feel like I should update the BIOS (or should I really?).

After 2 hours of failed attempts to update it, I find myself here. The update file i got from the Asus site is a .rom, so I can't run it with Windows.

So what have I done?
First I created a bootable flash drive with the .rom file on it using windows's tools (cmd > diskpart) as fat32. When trying to boot it (after I changed the boot order) I get a message saying "Remove any storage or media". When I use the BIOS's EZ Flash I get the following loop:

Checking floppy...
nothing found!
Checking CD...
nothing found!
etc etc

I tried the same, this time with ntfs - same results.

Then I did the same, this time making the flash drive bootable with Rufus. The results are mostly the same, but this time when I boot it, I get a flashing "_" at the bottom left of the screen. It stayed there for 6 minutes and I eventually lost patience. Should I have waited more?

Final note: I had been using a 2gb and a 4gb flash drive. Just now I've read that I have to use a f... Read more

A:Help updating BIOS

Bear in mind that if you screw up a BIOS update, it's very easy to turn your pc into a doorstop.

Read other 2 answers
RELEVANCY SCORE 44.8

Hello, My laptop is Pavilion 15-e017tx Notebook and i need to update the bios. After downloading the .exe file in the installation wizard it showed "options for creatin partition as recomended  " & "proceed without creatin the partition".What should i do. I dont have the recovery parition drive in my laptop as i formatted it by mistake. What shold i do. Or can i proceed without any partition create and i want to know actually what is created in the partition. Thanks

A:Updating Bios

 Your laptop with Windows 10 installed has no updates for anything including the BIOS. Only updates for Windows 8x and 7. The latest BIOS version is F.24A I have updated BIOS a number of times but have never come across the installer asking about creating partitions.

Read other 5 answers
RELEVANCY SCORE 44.8

My board is Asus M2A-VM HDMI. Latest version bios is avilable ie. HDMI1401. Kindly help me to update. I dont have a floppy drive. I want to do through CD. What r the steps to update
 

A:Updating Bios

Hello kunjikaly and welcome to Techspot.



While BIOS flashing can be done with CD ROMs on some newer motherboards, this is not recommended. This is because BIOS updating works at the core level of computing functions.Click to expand...

Taken from here by Tedster.

Regards Jase
 

Read other 6 answers
RELEVANCY SCORE 44.8

I've been trying to update my BIOS as I realised how old the driver is, but I useless, as they tell me to download programs that cost and I just cannot be bothered to go through all that.

Could anyone give me a link to where I can just download an update please?

A:Updating my BIOS

Try here, this is the driver page for your computer model number listed in your specs. Notice the OS says Vista but if its a BIOS update the only relevance of the OS is weather the flash utility will run in Windows 7. All the other drivers listed are for Vista. This could be the correct BIOS for your machine but a second opinion would be most welcome to confirm.

P.S Run at your own risk as we all know the risks of incorrect BIOS updates. Check the motherboard show to be P5LP-LE before flashing.

Read other 2 answers