Over 1 million tech questions and answers.

T470s configuring mobile braidband device - failing at 37%

Q: T470s configuring mobile braidband device - failing at 37%

Hi, When I performed WIndows 10 upgrade on my Lenove T470s, i have been getting the annoying message "Configuring mobile braodband device. 37% complete. Do not shutdown or restart windows." It seems to be stuck on the right hand corner and sometimes restarts from 0% but stuck again at 37% . Need help to fix this ThanksSB

Read other answers
Preferred Solution: T470s configuring mobile braidband device - failing at 37%

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)


I have dell latitude E7470 with windows 10. I have problem when I want to install dell dw5811e driver. I download latest software driver from dell support, run it and wait them to finish. Afterward software driver is configuring mobile broadband device, it always freezes at 37% with message "Fail error 82". I try with older version of software driver. It is still the same. Could anyone suggest how to resolve the problem.

Read other answers

I've been trying to fix a problem with my Lenovo T460S for months now, with hours spent on it and no success. The thing pops up with "Configuring mobile broadband device" every time from a fresh start, which takes about 30 seconds to complete. I've read this is to do with the SierraEM7455 onboard, but there is only one driver available for this on the website, and this does not fix the problem.  Does anyone know how to fix this? I'm getting very frustrated with it.

A:T460S "Configuring Mobile Broadband Device" every time on power up (Sierra EM7455)

HiThere is a solution in another thread where you've posted short question about issue with em7455 - disable Selective Suspend Mode drivers.Navigate to the folder where em7455 drivers package from Lenovo site is extracted (usually c:\drivers...). There should be Lenovo7455DriverSetup installer and Configuration.ini file. Open the latter in the text editor like Notepad. Add the following string in the 1st section [Default Values]:SS=0It'll disable SS mode drivers installation. Save the file, reinstall the drivers. I'd advice to remove existing modem drivers firstly.

Read other 2 answers

Configuration:X240 with Sierra Wireless EM7355 - Gobi 5000 with driver package V3.11.1310.3981Access Connection V6.21Windows 7 SP1 64BitWireless Provider Telus in Canada Problem I have is whenver I boot my system, the modem get "configured" with the following message"Configuring Mobile Broadband device" and goes form 1% to 100% (about 3 mins)Then the first itme I try to use the mobile boradband, it does the same thing.I am then able to use the internet connection.When I look at the speed, it says 21Mb connection. Help - Questrions:1. How do I get the system to not constantly configure the modem., I owuld think it would only need to do this once.2. Sometimes, I see speed of 42mb, not sure how/why I get the slower speed 95% of the time. This is very frustraitng since nobody wants to wait 5 mins before they can connect to the internet.

A:Sierra Wireless every boot "Configuring Mobile Bro...

I've been fighting with this, too. No answers yet.

Read other 4 answers

Not sure if this is a problem, more just a question... I installed a brand new Sierra EM7455 WWAN module a few days ago in my X260--got it direct from Lenovo. Getting it working was a little convoluted (had to reset BIOS) but it connects just fine to AT&T. The question or concern I have is when ever I restart the computer, I get a pop-up in the lower right that says "Configuring mobile broadband device...Do not shut down or restart Windows." It takes about 1-2 minutes, says "success" then everything is fine. The "problem" is that this happening every time I reboot. Has anyone seen this or know what's wrong? I've attached a screenshot of the message. I installed the official Lenovo drivers for the EM7455. I tried uninstalling the Sierra package and the message goes away--but so does the WWAN module... I re-installed the driver package and now the message is back. I had an X250 with the previous gen Sierra WWAN module and it was generally trouble free, no strange issues like this. Thanks

2016-06-15_15h46_22.png ?27 KB

Read other answers

We are using the Microsoft "Windows Device Portal" REST API to do mobile app side-loading.
Everything in the REST API is working for us except for the "uninstall app" which is a "http rest delete" call.
So, to troubleshoot, I thought I would use Microsoft "Message Analyzer" to see if we could see the http traffic coming to and from the workstation to the mobile device over the USB.
I didn't want to install the Fiddler .net library and it looks like if you are on W10, then you can use the Microsoft-Windows-WinINet-Capture provider.
My steps:
0. Start "Microsoft Message Analyzer" in admin mode
1. click "New Session"
2. click "LiveTrace" button
3. Add providers: 
    a. Microsoft-Windows-WinINet
    b. Microsoft-Windows-WinINet-Capture
4. put *IPAddr == as a filter
5. click Start button
At the top, I get an error icon saying "Modules Loaded  Errors or warnings were found when loading modules."
When I look at the log, these are the errors:
8/29/2017 11:50:03 AM Error MessageAnalyzer\OPNAndConfiguration\OpnForEtw\OpnForEtwProcess\TCPIPComponentExt.opn(175,8-175,22):  undeclared 'LocalAddress'
8/29/2017 11:50:03 AM Error MessageAnalyzer\OPNAndConfiguration\OpnForEtw\OpnForEtwProcess\TCPIPComponentExt.opn(177,28-177,42):  undeclared 'LocalAddress'
8/29/2017 11:50:03 AM Error MessageAnalyzer\OPNAndConfiguration\OpnForEtw\OpnForEt... Read more

Read other answers

So here?s a stressful situation.
I?ve been having this issue with both iOS and Android, where sometimes when I upload a photo to an image service or social media (Instagram, Ello, Facebook, etc.) The photo appears to be uploaded completely normally, but after I come back to it, say 10 minutes later, there is a visible distortion or glitching on the picture, as if the data stream was interrupted or intercepted and whoever was doing the interception didn?t properly reconfigure the data upon exit so the picture ended up having a visual artifact or glitch upon it. I?m not sure what this is, or why it?s happening, but it?s even happened on my digital camera sometimes, (after transferring the DCIM files to my pc, and then cellphone of course.) They appear normal on PC, normal on the phone, but when they are uploaded, they are either IMMEDIATELY glitched near the bottom half or top half of the screen, or after a certain amount of time, it just shows up. I would love it if anyone had any experience with this or knew what the issue was, because it isn?t as consistent as a ?connector cable? error or any of that, it?s more random and only happened on a photo or two. I would attach a picture, but upon noticing this happen again I immediately uninstalled and deactivated those accounts for fear someone may have been snooping in or perhaps intercepting my data, ( causing concerns towards banking, emails, etc. )

Read other answers

We have some symbol windows mobile-based handheld devices that we use in our business.  We connect these devices to our computers to copy files to.  This all worked fine until recently the devices come up as failed.
It appears in device manager with a yellow exclamation point.
Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged.  (Code 19)
I've tried all the solutions I can find on the web and none of them work.
Uninstall the device in device manager and scan for changes.  It downloads the driver from windows-update and returns to code 19.
Tried hardware troubleshooter which basically seems to automate the process of uninstalling and scanning.
I've tried removing windows media player 12 feature and adding it back.
I've tried deleting USB controllers from Device Manager and rebooting, it re-detects them all and still gets code 19 on the device.
I've tried deleting upper and lower filter values in the registry which I found out later is mainly for CD/DVD devices, that didn't fix anything.
I've tried removing and re-installing Windows Mobile Device Center and driver pack and that did not fix it either.
Additionally Canon Powershot camera gives us similar results.  MTP USB Device failed.  
This is so far happening on 3 of our workstations that we know of.
At first we thought it was due to windows updates but nothing recent has been installed that looks rela... Read more

A:SOLVED:Windows Mobile-based device and Canon Powershot cameras showing code 19 and MTP USB Device failed.



Thanks for posting in Microsoft TechNet forums.


Do you have Kaspersky installed? Kaspersky Filter driver caused that any USB device could not connect.


It is suggested to have a look at the following registry. Make a backup of it and remove the Upperfilters setting:


“Upperfilters” = klfltdrv


If the issue persists, please find a working machine and compare the registry settings.


Best Regards

Magon Liu

TechNet Subscriber Support
in forum. If you have any feedback on our support, please contact
[email protected]

Please remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ?

Read other 13 answers

Hi Guys ! I have been getting this error for a while now. Since august I think. It happens very randomly and I don't know what triggers it really. I tried to put another m.2 and it worked perfectly, no errors. But with the factory m.2 I get this error and I never got the way around to fix it. When I first got this error I barely could start my computer. 9/10 times I got the error and I couldn't start the computer at all. I replaced it with another m.2 and worked fine until I decided I wanted to put the factory one again ( because it has twice as much storage ). Now I still get the error but rarely. Casually. In very random situations. I still find it very frustrating and I was hoping someone has any solution. Thanks and have a nice day   

Read other answers

Hi Guys ! I have been getting this error for a while now. Since august I think. It happens very randomly and I don't know what triggers it really. I tried to put another m.2 and it worked perfectly, no errors. But with the factory m.2 I get this error and I never got the way around to fix it. When I first got this error I barely could start my computer. 9/10 times I got the error and I couldn't start the computer at all. I replaced it with another m.2 and worked fine until I decided I wanted to put the factory one again ( because it has twice as much storage ). Now I still get the error but rarely. Casually. In very random situations. I still find it very frustrating and I was hoping someone has any solution. Thanks and have a nice day   

Read other answers

Microsoft Windows Mobile Remote Adapter -from windows update Install  failed - Where can I find this so I can retry to re-install - mobile device does not connect  WINDOWS VISTA- verizon treo running windows mobile 6 professional CE OS 5.2.1620 (BUILD 18125.0.4.2) Here is the error message: Microsoft Corporation - Networking - Microsoft Windows Mobile Remote Adapter Installation date: ‎10/‎4/‎2009 12:02 PM Installation status: Failed Error details: Code 800F020B Update type: Recommended Microsoft Corporation Networking software update released in May, 2007 More information: http://winqual.microsoft.com/support/?driverid=20060042 Help and Support: http://support.microsoft.com/select/?target=hub I could not find anything to help me with this.. I did download & install the new Windows mobile device center v 6.1.6965  but the device will still not connect.. i'm thinking the failure of the Microsoft Windows Mobile Remote Adapter is the problem (i think)  so I want to re-install the update.. but don't know where to get it. Windows update in VISTA does not let you go out and pick an update from a list Any and all help appreciated

A:Microsoft Windows Mobile Remote Adapter -from windows update Install failed - Where can I find this so I can retry to re-install - mobile device does not connect

Your best option may be to open device manager (with device connected) and uninstall any related device, making sure the 'Delete driver software for this device' is checked.Once you have done this, unplug your device, uninstall WMDC 6.1 and reboot your machine. Then follow the instruction on my first reply, this should sort it for you.If anyone is helpfull, please click the 'Vote as helpfull' icon.
If anyone has answered, please click 'Suggest as answer' at the bottom of the post involved :)


Read other 6 answers

Hello!I would like to ask if is there any solution to stream audio from my android phone (LG G4c) to my t470s via bluetooth?I can pair the devices but there are no options for audio connecting, only sending files. Serial Number: PC0NZPD7Machine Type Model: 20HGS09M00 Is there a solution to stream audio from my phone to my ThinkPad, and maybe recieve calls aswell? (My old notebook was able to do theese things in Windows 7, now I use Windows 10 Enterprise) Thank you!Ben

Read other answers

OK, i have posted this once, but in a differnt Set of threads (Hardware and Devices), so if figured i would give it a shot here. I have 7 Ulitmant 32 bit N version. I am trying to install the Mobile Device Manager, and when i try to install it, it gives me the error, "Windows is missing componts" I have tryed checking Microsofts website, and to no avail. What componets does the Mobile Device Manager need to install?

Thanks for your feed back.

A:Mobile Device Center

hi vosberg1,it may be you need the windows component updates and data access components i will try to find the link for you, be back shortly

Read other 9 answers

Please pardon my naivete, but I really have very vague ideas about these sticks in terms of after purchase cost(activation? monthly?) and amount of internet time and usage(how much surfing it allows? can I watch hour/s long videos? Several times a day? Everyday?

T Mobile ZTE MF691 Rocket 3G 4G Webconnect USB Laptop Stick Modem AirCard HSDPA | eBay

Above link is an example(of several)e-bay listings of device.(stick).

NetZero is for a short time offering a year-long cost-free 4GB stick for a cost of the device. That's it.

PS: I am fully aware this topic has nothing to do with W7...but I really do not know where to go for this.

A:Mobile Broadband device

With those Adaptors it all depends on the tarriff/carrier as to what you get.

Normally a top up of say $10 will give you about 1-2gb of usage. Thats not a great deal of data when it comes to streaming videos, but will five you hours and hours of surfing.

I use my phone as a hotspot when im out the house, and id say i watch about 1-2 hours of youtube and netflixs a day, in a month that adds up to about 20-30gb of usage as an idea of heavy video streaming. But luckily for me i get unlimited usage on my phone with a fair usage policy of 1000GB a month.

Read other 3 answers

I am having the worst time getting my phone to sync with WMDC. It used to work too becfore my computer totally crashed and I had to start from scratch. Now after installing the WMDC and plugging in my phone I get an error in Vista where the host process and driver framework stop and the partnership doesn't get established. PLease help!!

I want to just start fresh, but I don't have a restore point available from before I first put WMDC on the computer.


Read other answers

what is your favorite mobile device ?

A:what is your favorite mobile device ?

having gone through iPhone, several Androids (HTC, Samsung, Sony), BB and Microsoft, have to say the best bang for buck = Microsoft (currently rocking 640 series).

Read other 2 answers


Looking for help on ad-hoc wi-fi network between Dell Inspiron 15 Laptop running Win 7 Ultimate and Nokia N79 running Symbian S60v3

I want to view live tv on my phone. A USB TV tuner card is connected to laptop which is in turn connected to Satellite DTH receiver. I can see TV in my laptop in Win Media Center and dedicated app provided by USB TV card maker.

I know basics - I have to connect phone and laptop via ad hoc wi fi connection. Run VLC player, select source and use rtsp:// protocol with .sdp extension.

I do all this but yet get unable to connect on real player in phone.

Pls share details about configuration settings of ad hoc connection ipv4 settings etc.

What am i missing?

A:Ad Hoc Connection between Lap and Mobile Device

At best I'll be of minimal help here, as there is so much I do not know about the phone and the special apps you are using.

For the ad-hoc wireless I recommend to get it working unsecured before trying to add encryption. You can leave it as a dynamic connection and then each device will be assigned an APIPA (169.254.x.y). This is a pain, however, because it takes a while for the two devices to get talking to each other and you don't immediately know the IP addresses in case you need to do some troubleshooting. So, I recommend assigning static IPs--suggest on one machine and on the other. Mask

When you think that the network should be working open a Command prompt on the laptop and

ping (assuming the phone was assigned that IP)

If you get replies you know you at least have one way communication.

If you have a non-Windows firewall or security suite on the laptop you may have to configure it for the desired access.

Read other 1 answers

I have an old HTC S523 phone running Widows Mobile 6.5. This syncs OK on W7, but throws up an error in Exchange ActiveSync when I try to sync from W8 Pro (RTM). The Mobile Device Center software loaded and ran when I connected the phone, and it allows me to set up the connection, and to browse through the folders etc on the phone.
Anyone know of a workaround?

Read other answers

can i uninstall windows mobile device centre i dont use it and never activated it

A:windows mobile device

Hi Andy, If you aren't planning to use it and have never activated it you certainly can uninstall it without a problem.

Read other 2 answers

Again, I thanks for all of the help with the S-video. Although, ever since then, I am not able to connect to the internet with my mobile internet device/usb port. I am not sure what happened. I just finished troubleshooting with Comcast technical support and we discovered that its not the mobile device. We uninstalled the comcast software and reinstalled it. Also, we went to the device manager and found yellow question marks under USB BUS CONTROLLER, UNKNOWN DEVICE and FINGER PRINT SENSOR. I reinstalled the UNIVERSAL SERIAL(USB) BUS CONTROLLER and that eliminated the yellow question mark. Also, I uninstalled the UNKNOWN DEVICE & FINGER PRINT SENSOR. Would you have any idea how I can get my connection back?

A:Mobile device/usb port

Read other 8 answers

Hey, so I have Windows 10 (no touch screen, desktop computer) and it keeps being detected as a mobile device. This is forcing sites to send me the mobile version of their website. It happens in both Chrome and Firefox. I tried some "useragent" fix for firefox but nothing is abnormal there. How the heck do I fix this and why does it detect me as mobile?
It also says I need to update my flash which i already did. 

Read other answers

I?m trying to look at Sigma?s site. But I keep getting the mobile site.

Welcome to SigmaPhoto.com's Mobile Website. You have been directed here because we have detected that you are on a mobile device. If you would like to view the full site please visit: www.sigmaphoto.com

When I click on that it stays on the mobile site.

When I remove the ?m.? in the address; it puts it right back and stays on the mobile site.

I can switch users to my wife?s account and see the ?full site? just fine.

How do I tell IE8 in Windows 7 that I am not a mobile device?

A:I am a desktop PC not a mobile device!!

I would clear the temporary files cache as a start.
Also i would try a second browser just to be sure the problem is IE and not something else system related.
Firefox is relatively small and reliable.
Mozilla | Firefox web browser & Thunderbird email client

Read other 1 answers

The Windows Mobile device Center will not open up. Ive deleted it and re-installed on Vista and still get nothing to open. please help. thank you.

A:Windows mobile device center

Windows Mobile Device Center troubleshooting guidehttp://www.microsoft.com/windowsmobile/en-...leshooting.mspx

Read other 1 answers

I just upgrade my laptop from the build 7000 x64 to 7057 x64. The upgrade was very slow very but everything is working except the "windows mobile device center". When I launch it, a window appear indicating that WMDC has stopped working and the given details are :

Stopped working

Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: wmdc.exe
Problem Signature 02: 6.1.6965.0
Problem Signature 03: 465efff8
Problem Signature 04: Microsoft.WindowsMobile.DeviceManager
Problem Signature 05:
Problem Signature 06: 465efe7a
Problem Signature 07: 487
Problem Signature 08: 43
Problem Signature 09: System.NullReferenceException
OS Version: 6.1.7057.
Locale ID: 2060

Read our privacy statement online:

If the online privacy statement is not available, please read our privacy statement offline:
Does anyone have this problem ? Any idea to solve it ?

many thanks

A:windows mobile device center

DL and install it again?

Read other 9 answers

First, I rebuilt my computer and apparently it's not there. And I don't remember having to download it before.

Second, when I go to download it, it says "Validation Required".

Download Details - Microsoft Download Center - Windows Mobile Device Center 6.1 Driver for Windows Vista (64-bit)

Then it says to click "Continue"...

Genuine Windows Validation - Microsoft Download Center

Which brings me to the Home page...

Microsoft Windows

A:How do I get Windows Mobile Device Center?

OK, so interestingly, that Microsoft website didn't work in IE9, but worked in FireFox. LOL!

FF allowed me to DL some program that spat out a "validation code" to enter into the website to download the WMDC file.

Judging by the file name, it turns out that I did download that file years ago, but it doesn't look like I ever downloaded the "validator". Must be something new with Microsoft. I guess it must be quite new...because it doesn't work on their OWN website with their OWN browser! rofl!

Read other 6 answers

The site I am trying to watch video on is calling my laptop a mobile device in error. What can I do to watch it?

A:video mobile device error

The browser you are using may not have the proper compatibility with the site or the other way around, bottom line it thinks it is being contacted by a mobile browser. If you are using IE, switch to compatibility mode, or try a different browser.

Read other 1 answers

I downloaded and installed WMDC but it won't run. I goggled everything I could find on the subject but nothing worked. I am trying to get the program back so that I can sync my MX3000 remote to my PC. The remote works fine, but if I need to edit anything I will be SOL!. Any help is greatly appreciated.
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, x64 Family 6 Model 23 Stepping 6
Processor Count: 2
RAM: 3070 Mb
Graphics Card: NVIDIA GeForce GT 620, -2048 Mb
Hard Drives: C: Total - 103016 MB, Free - 40119 MB; E: Total - 103023 MB, Free - 57398 MB;
Motherboard: ASUSTeK Computer INC., P5N-D
Antivirus: Webroot SecureAnywhere, Updated and Enable

A:Windows Mobile Device Center

You can try the following:
Plug your device into the computer
Press Windows key + R In the open field type: devmgmt.msc
Look under Network adapters for Microsoft Windows Mobile Remote Adapter, right click on it and select uninstall.
Next look under Mobile Devices for Microsoft USB Sync, right click and uninstall.
Now unplug your device and plug it back in, and see if WMDC launches.
If some reason device manager is not picking up the device after plugging it back in, just right click on the computer name in device manager and select scan for hardware changes.

Read other 2 answers

what is your favorite mobile device ?

A:Which is your favorite mobile device brand?

having gone through iPhone, several Androids (HTC, Samsung, Sony), BB and Microsoft, have to say the best bang for buck = Microsoft (currently rocking 640 series).

Read other 19 answers

I am look for help in the matter. I cannot get the device to go to comport 3 its keeps saying error as if its busy. what else can i do.

Read other answers

I have a Palm 750v conected to my laptop with Vista. It took me hours of struggle to get it syncing to Outlook using Windows Mobile Device Centre. It has worked now perfectly for a few months. Now suddenly whenever I open WMDC it comes up with message "WMDC has stopped working"

I have uninstalled it twice now, deleted all info of device in windows regitry, reinstalled WMDC 6.1 twice, and still get this problem.

Here is the details:
Stopped working

Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: wmdc.exe
Problem Signature 02: 6.1.6965.0
Problem Signature 03: 465eefc9
Problem Signature 04: Microsoft.WindowsMobile.DeviceManager
Problem Signature 05:
Problem Signature 06: 465eeea2
Problem Signature 07: 4a8
Problem Signature 08: 47
Problem Signature 09: System.ArgumentException
OS Version: 6.0.6000.
Locale ID: 7177

I am desperate. I have searched the web, but get no help. Can someone please advise me or point me in the right direction.
Is there perhaps another program I can purchase to sync my Palm windows device to Outlook?

Read other answers

I am using Vista home premium and I have 32bit mobile device center installed. My pocket pc is a mio digiwalker which I connect using the USB cable as supplied with the Pocket PC.
The problem is that I cannot get the new software to update on the Pocket PC, therefore I am not able to sync my contacts, calender, and notes.
The device center shows that the OS has recogisned the Pocket PC but when you request a sync it shows 'sync failed'
A soft boot using the wand into the small hole at the side of the pocketpc resets the pocketpc and the device center shows that it has sync'd but yet again the contacts etc have not updated.
I have tried many times with the same result, I have also reinstalled the 6.1 mobile device center software and still I get the same problem.
The Pocket pc still shows that Microsoft pocket pc version 4.20.0 (Build 14053) is still installed.
Any help would be appreciated thanks, I tried the online walk through to set up the mobile device center and this has not cured the problem.

Read other answers

Windows Mobile Device Center...... useless!

I need anyone who can help, to read this thread here...Unable to connect pda to Vista - Vista Forums


Here is the short version: WMDC does not recognize devices. HOWEVER, the Vista does recognize the USB connecting something, it does "seem" to install drivers but actually says "searching for unknown driver files" yet above that states "your device is ready to use" (now that staement in and of itself does not go together, but none the less I am not alone in seeing it. See other thread for better details)

Heres the question --- does anyone have a work around/alternative program/stand alone drivers that will allow Vista to see/comunicate with PDA's???????

Now for those who are surfing the net, and dont want to create a profile -- just email me directly with an answer: ***************

A:Windows Mobile Device Center

PS... any good information emailed directly to me by non-registered users WILL be posted to this thread so that full integrity and purpose of this forum is not subverted!

Read other 2 answers

Please can someone help me because I'm useless at this sort of thing sorry if im posting this in the wrong place for a start.....

A while ago I had someone staying with me, he used the PC now and again, After a while of him using it, when turning on my computer I started getting driver could not be installed message, It says its a windows mobile based device that's failing and I can't find out what it is or how i stop it?

When I go into device managed it says windows mobile based device This device cannot start. (Code 10)
something else I managed to get into earlier about it said something along the lines of root/wpd/0000 this device cannot start.

Is there a way of finding out what it is and stopping this install thing all the time? its driving me mad.

A:Windows Mobile Based Device Help!

Use this free program to disable the startup item related to the Windows Mobile Device: http://technet.microsoft.com/en-us/s.../bb963902.aspx

Read other 1 answers

The Windows Mobile Device Center does not start after installing the latest updates to Windows 10. My computer was working with a mobile data collector device in May 2017. Since then with numerous updates installed it has stopped working. Can anyone help?

Read other answers

I'm working on a web page hosted from my computer. It works fine in most browsers, but in mobile devices the flash banners are not working. I need a free application to convert my swf files to mp4 so I can use them in mobile devices. Does anyone have any suggestions?

A:mobile device video suggestions

Personally, I use AVS Video Converter, but it costs money.
I found these 2, and I've never used themt, but they says they support swf.
I'd recommend the first link.. the 2nd link looks kind of weird..

Read other 1 answers


How to get rid of Windows Mobile Device Center on Windows-8 ?
when i connect any Device (Windows-CE or Windows-Mobile) this Screen jumps and harassing me

thanks in advance

A:How to get rid of Windows Mobile Device Center ?

Hmm, honestly my first time hearing about this.

When I plug in a device a notification on top right part of screen pops up asking what I want to do with this device. WMDC window never popped up.

I thought this was only if you have a windows phone. It shouldn't open up for any random device, only your phone.

You can set it up to "do nothing" when a device is plugged in,
but this would mean every time you plug in a new device,
in the upper right-hand corner to click the notification and selecing "do nothing"

Read other 1 answers

does anyone know bout if theres a chance that the axess.tel mobile device could work in a mac?
the drivers in the installation cd don't work for it and it doesn't say it's compatible...


Read other answers

Is this needed for my iPod Touch to work? It's taking up about 60 MB ... And I hate bundled software too.
Also, can I still update Quick Time and iTunes without Apple Software Update?

Read other answers

I have an android phone, I have a folder on my PC called music, and a folder on my phone SD called music. What I want to do is make those folders mirror each other. If I make a change on one, I want the other to mirror next time the phone is connected. Is there a way to do this?

A:Mirror folder of a mobile device

I would suggest using the app Dropsync. This app is available on the Google Play Store and allows you to designate folders on your Android device that will sync with Dropbox.


Read other 1 answers


I want to buy new mobile and I need your advice
most imprtant for me the speed of the system ,,memory
thing not important for me ( quality of camera,,shape of mobile )

A:Any tips on buying a new mobile device?

By mobile I infer you mean cell phone. At any rate, I would prioritize the features and functions that are (a) import to you and (b) you use regularly. The hype on specs may be create bragging rights, but that's not worth $0.02 to me.

I'm and old T**d and love my 3g flip phone for the ease of use designed by Nokia. The so called smartphones are not on my wishlist. If I want pictures (and I take a ton of them), I'm not using any camera in a phone - - I take my handheld which gives me the PAS feature for low-light photograph required for indoor and museums. USEABILITY is big with me.

Read other 6 answers

Hello, I have Win 7 Pro installed and am having problems installing WMDC 6.1.
It appears to go through the installation process but at some stage aborts ie there is no evidence of the installation after the process.
Would the experts amongst you please offer me a solution for this issue.
Thanks in anticipation,
PS I have also tried a WMDC install after clean booting my PC without sucess!

Read other answers

Can we use internet on mobile through bluetooth device.I have DSL internet service and Noika 7610.I want to use internet on my mobile.So if we can then what i have to do i mean which setting i have to use.

A:Mobile Internet through Bluetooth device

I would assume if your nokia phone has a networking profile you should be able to get internet from the PC or if you have a router you could use a bluetooth access point that connects to your wired lan I.E. http://msmobiles.com/catalog/i.php/563.html

of course the bluetooth on your knoe may have different screens but the connection is the same. Setup a LAN profile and then setup the passwords and all then you should have internet passthrough from the PC your connected to.

Read other 3 answers

Hello everyone!!

I m new to this forum and this is my first post. But, I must say that I m using Windows7 without any problem.

2 days ago, I bought a new Windows mobile phone ASUS P527. I want to connect my phone with my PC (Windows 7).
Whats the software to use as I came to know that "Windows Mobile Device Center 6.1" only supports Windows Vista.

Waiting for any help..............????

A:Windows Mobile Device Center 6.1

Hello again............. No replies......??????

Tried to connect my P527 with my PC (Windows 7) yesterday, & to my surprise, it just installed the drivers by itself (11.9 MB) and my phone got connected itself. No need of inserting the CD got with the phone.

Read other 1 answers

Hi this is my first post.
In my laptop there are two networks
1. Local area connection which i use to connect with my router(wired connection,Ethernet)
2. N79 the ad-hoc network which i created to connect with my mobile device.

Now when i turn on WiFi in my laptop and start listening, my mobile device detect the WiFi network. Then i start to browser of my phone and try to load a web page, and the computer shows the network status as connected. But in the phone still i cant access web pages, the browser of the phone try to load the web page and reply "no gateway reply".

What can i do for this?
Thax in advance.

A:Share internet with mobile device-Nokia n79

When you create the adhoc connection on your latop, you would enable ICS. The connection that get ICS is your LAN cannection, it'll say shared. When you browse on your phone, it will pick up this adhoc network which is wireless adhoc network. You logon like you would a normal wireless network with security key (if it's setup with one). If you can connect than i don't see why you cannot surf the net. Can you confirm that your phone have actually connected to this adhoc network.

Read other 1 answers

Looking at the Bitlocker/Device Encryption Recovery Keys section on OneDrive, it doesn't show any Windows 10 Mobile recovery keys there despite 'Device Encryption' being switched on.

On the actual device itself, it also doesn't show as encrypted under 'Storage', which begs the question, is 'Device Encryption' even on? Other than physically trying to access data on a locked phone, there doesn't appear to be a way to tell if the device storage is actually encrypted or not other than the toggle switch for enabling/disabling Device Encryption being set to on. In which case, if it is on, where are the recovery keys stored for Windows 10 Mobile Devices?

Read other answers

I have a Motorola Q9h from AT&T running Windows Mobile 6 Standard.

I'm trying to sync the phone with Outlook 2007 on a computer running the Windows 7 RC. When attempting to sync through the Windows Mobile Device Center I receive an error message saying that "the server could not be reached".

Read other answers