Over 1 million tech questions and answers.

booted into safe mode windows 8.1 have a black screen cant get out of safe mode

Q: booted into safe mode windows 8.1 have a black screen cant get out of safe mode

I booted into safe mode to try an fix a issue I selected to boot with command prompt butb I have a all black screen an can't get out of safe mode now I restarted the laptop a few times still the same 'anyone know how to fix this?

Read other answers
RELEVANCY SCORE 200
Preferred Solution: booted into safe mode windows 8.1 have a black screen cant get out of safe mode

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 132

Yea trying to get ino safe mode. When I do hit safe mode and choose my account to log on instead of going to my desk top the screen goes blank and the words safe mode appear in all four corners.
Any help would be great!
Have a good day
John

Read other answers
RELEVANCY SCORE 124.8

Please help!  Over the past week or two my computer has been running slower and slower.  Then lost the ability to download anything unless in safe mode.  Now when opening computer in normal mode get nothing but black screen.  Think I got something when my antivirus software lapsed and I wasn't protected for a bit?
 
Running Windows 7 64
 
Tried running Malewarebytes, Avast, SuperAntiSpyware, Microsoft Defender, sf scan, CCleaner and nothing has helped.  Everything comes back fine. 
 
I'm not very computer savy but from what I have been reading you all can help!  Much appreciated and many thanks for any assistance. 
 
 

A:I'm lost. Only open in safe mode. Normal mode give black screen.

Hello ,what is the sf scanBoot to safe mode with Networking and try running these......MiniToolBoxPlease download MiniToolBox, save it to your desktop and run it.Checkmark the following checkboxes:Flush DNSReport IE Proxy SettingsReset IE Proxy SettingsReport FF Proxy SettingsReset FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Users, Partitions and Memory size.Click Go and post the result (Result.txt). A copy of Result.txt will be saved in the same directory the tool is run. Note: When using "Reset FF Proxy Settings" option Firefox should be closed.TDSSKillerDownload TDSSKiller and save it to your desktop.Extract (unzip) its contents to your desktop.Open the TDSSKiller folder and doubleclick on TDSSKiller.exe to run the application, then on Start Scan.If an infected file is detected, the default action will be Cure, click on Continue.If a suspicious file is detected, the default action will be Skip, click on Continue.It may ask you to reboot the computer to complete the process. Click on Reboot Now.If no reboot is required, click on Report. A log file should appear. Please copy and paste the contents of that file here.If a reboot is required, the report can also be found in your root directory (usually C:\ folder) in the form of TDSSKiller_xxxx_log.txt. Please copy and paste the contents of that file here.AdwCleanerPlease download AdwCleaner by Xplode and save to your Desktop.Double clic... Read more

Read other 3 answers
RELEVANCY SCORE 124.8

Hello all
First time poster with problem after peforming sys restore on win7 pro 64bit.
Was troubleshooting a problem w/taskbar not staying hidden, tried to restore back 24hrs to when a java update occured. Restore seemed to proceed normally, but upon restart, it boots normally to just before the login screen would appear, then the screen goes black and all that is visible is the cursor , which I can still move.
But that's as far as it gets. Trying to boot in safe mode, or repair mode ends exact same way - can't boot in to try anything
Any ideas??

A:Black screen at boot with safe mode, system restore, or repair mode

no one has any suggestions? I also triedtoboot to my win7 dvd to see if I could attempt to repair but again, it only gets thru the windows bootscreen then goes black with only the mouse cursor showing as before.

Read other 9 answers
RELEVANCY SCORE 124.8

Windows only opens in safe mode,tried reloading drivers, last known good configuration,etc. When in normal mode black screen only, when acessing task manager shows all processes stopped and will not allow me to start them.

A:Black screen when start in normal mode, works in safe mode only.

Hello CliffordJ. Microsoft Security Essentials is installed, correct? Many MSE users running Vista (but not all) suffered black screen after login following installation of Update for Microsoft Security Essentials - 4.9.218.0 (KB3140527), released about a month ago. In fact there is already a thread here: http://www.bleepingcomputer.com/forums/t/606422/windows-vista-x64-bksod-after-login-or-no-access-in-normal-mode-suspect-mse/. The posters there disabled MSE 4.9 in Safe Mode by unticking a brand-new setting in the UI (Administrator > Turn on this app). Another method of escaping this situation would be to restore your system to a point before the update was installed, then hide the update in Windows Update. That would allow you to resume using MSE 4.8 if you wish.

Read other 10 answers
RELEVANCY SCORE 124.8

Windows only opens in safe mode,tried reloading drivers, last known good configuration,etc. When in normal mode black screen only, when acessing task manager shows all processes stopped and will not allow me to start them.

A:Black screen when start in normal mode, works in safe mode only.

Hello CliffordJ. Microsoft Security Essentials is installed, correct? Many MSE users running Vista (but not all) suffered black screen after login following installation of Update for Microsoft Security Essentials - 4.9.218.0 (KB3140527), released about a month ago. In fact there is already a thread here: http://www.bleepingcomputer.com/forums/t/606422/windows-vista-x64-bksod-after-login-or-no-access-in-normal-mode-suspect-mse/. The posters there disabled MSE 4.9 in Safe Mode by unticking a brand-new setting in the UI (Administrator > Turn on this app). Another method of escaping this situation would be to restore your system to a point before the update was installed, then hide the update in Windows Update. That would allow you to resume using MSE 4.8 if you wish.
 
I am extremely curious why this happens to many but not all MSE users running Vista. If more advanced forum members ask you for further information, I hope you will cooperate. Above all, I wonder if any other security software with real-time protection is installed (or perhaps improperly uninstalled)? Of course there is a possibility that your issue is something else...

Read other 9 answers
RELEVANCY SCORE 124

Hi all!

Today I started up my computer (an XP machine running SP3) and after it went through the BIOS, it showed the Windows startup screen (the Windows logo with the blue progress bar), but when that was done, it went to a black screen and won't do anything else.

I restarted and tried a few different things; Start Windows Normally, and Last Known Good Configuration both got me the same black screen.

CheckDisk ran, and it made it to the end, but froze when it said "please wait while your computer reboots" ... after waiting more than 10 minutes, i hit reset and tried to reboot it myself. It did the same Bios-Windows-blackscreen thing as before.

I also tried booting into Safe Mode, which DID work, and when I got in there I tried to do a System Restore (two, actually... for two previous dates) but both did nothing to resolve the problem. I tried simply copying my "important" files to my external HD (which it sees), but it won't copy in Safe Mode

When loading in Safe Mode, the driver list pauses and says "press esc to cancel loading of SPTD.sys" but I've tried it both ways and it doesn't make a difference that I can see.

I tried using my XP CD to boot from, which takes me into the Recovery Console, and I chose to hit "R" to repair, but when it asks me what drive I want to login to (which is C:) I don't really know what to do from there. I haven't booted from a CD before, so I assumed it would run a "Repair Wizard&... Read more

A:XP won't load in regular mode (black screen), but will in Safe Mode

Just to clarify, I don't really care if the XP installation is fixed, I just want to know if there's a way to get the files off the HD onto an External USB drive. There's gotta be a way... right?

Read other 3 answers
RELEVANCY SCORE 124

Help -  I have a Dell OptiPlex 960 with Win 7 OS SP1
 
My computer is giving me a black screen on normal bootup - I can hear the windows tune but then it is black
 
I am able to get it to boot in Safe Mode and I have tried the following: ComboFix, Malwarebytes, and adwcleaner
 
But it stlil boots to a black screen 
 
What do I do now??????

A:Will boot in safe mode but black screen in normal mode

Boot into safe mode...then do the following.
 
Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post. 
Louis

Read other 14 answers
RELEVANCY SCORE 124

Hey guys, I seem to be having trouble, and I'm not terribly inclined with laptops and computers, mine is an HP G62 laptop, and that's about as far as I know about it. The other day I went to use it, opened it up, I had 3 tabs open (google chrome), and I tried to open a new tab. All new tabs were freezing, and my itunes had frozen as well. I tried closing the laptop, hoping it would go into sleep mode, but it didn't, it stayed running. I reopened it and the screen stayed off, so I did a hard reset (holding the power button to turn it off) and started it back up. I started it in normal mode, and logged on, but after loading from the log on screen, it went to a black screen with just the cursor, and stayed there. I did another hard reset, and started it in safe mode, and now this is how I'm currently running. I've tried disabling the display drivers and restarting, that worked momentarily, but froze shortly after. Next, I tried a system restore, which did absolutely nothing, and then I ran chkdsk and, again, nothing. After all this, I decided to try uninstalling the display drivers, which, once again, did nothing. This seems to be all the info I have gathered from online, and through friends' help, there seems to be nothing left to do that may fix this problem. Anyone have any idea on where to go from here?

A:Black Screen in Normal Mode. Only Safe Mode Works.

Hello ericberard,

 

You?re having a problem with the computer going to a black screen.

 

First test the hardware.


Turn off the computer

As you power it back on, tap the F2 key. This will load hardware diagnostics.

Once the screen loads run the startup test.
 

If this is windows 7 and the startup test pass.


Power back off the computer.

As you power it back on, tap the F8 key. This will load Advanced Boot Options.

Select Last Known Good Configuration.
 

This will take the system back to when everything was working correctly.

 

Clicking the White Kudos star on the left is a way to say Thanks!

 

Let me know how everything goes.

Have a good day.

Read other 9 answers
RELEVANCY SCORE 123.6

Hello everyone, I'm not sure if I am allowed to post this on here since its partially about windows 8, so if it's not allowed then I apologize.

First off I have a 2TB internal HDD and 1.75TB of that is for windows 7 the rest for 8, and everything runs okay at the moment as I symlinked my steam games.

Anyway, I can access windows 8 safe mode easily enough through the select operating system screen, but how do I now access windows 7's safe mode? it must be possible, preferably without booting into it.


I may not have looked hard enough and if it's extremely simple I'm going to feel stupid

A:How can I get into safe mode when dual booted with windows 8?

Hello Cryptoncore,

You might be interested in option two and three in this tutorial.

If you want it the easy way (which I recommend), you might want to read this tutorial (it is on Eight Forums, but this works on both Windows 7 and 8), it will explain how to add all boot options to your context menu, which is very useful in both Windows 7 and 8.
Good luck and keep us posted,
Nommy

Read other 6 answers
RELEVANCY SCORE 122.8

I have a gateway computer that is about 3 years old. It has a ati radeon 3200 gfx card and came with 4 gigs RAM. Recently I purchased 2x2gb G Skill DDR2 ram upgrade in hopes of more efficient gaming [gfx card is OK for 8gb ram max]. After installing the new ram [about a month ago] the computer was running fine. The new ram created a button on my toolbar called AMD Catalyst, and right-click gave identical options for each ram card, one was a list of what looked like screen settings. I know it were running on 600x800, and last night my troublesome youngest son was using my computer and says he clicked a different option by accident, making the screen freeze momentarily then go black.

I've tried:
restarting my computer
removing the 2 G Skill ram cards
under msconfig in safe mode, disabling AMD Catalyst, for it seems to be the root of the problem.

But every time i restart my computer and try booting in normal mode, I get the typical Welcome ring from the speakers accompanied by a black screen. The screen is a 36" Vizio flatscreen tv with VGA hook up, been using for a computer screen for over a year now.

Any ideas? Thanks in advance!

A:Black screen normal mode, safe mode OK

If you can go back to good times with system restore, you will be fine.
System Restore - How to
Put all cards back, etc. before the restore.

Read other 1 answers
RELEVANCY SCORE 122.4

hello, I started msconfig.exe (system configuration) the boot tab
Check "safe boot" with minimal option
reboot the computer, I see the miscrosoft logo with spinning dot for few seconds and then a black screen (no mouse, nothing)
The PC (dell M6700) was working fine up to now , I just wanted to start a sfc /scan from safe mode but now I'm stuck in safe mode with a black screen
thanks for your help



w.

Read other answers
RELEVANCY SCORE 122.4

Basically im in need of help, updated to windows 8 and all was well with it and then tried to load it up and it just loaded up black, now it seems to be the graphics card drivers that are doing it and the solution would appear to un-installing however i cant uninstall and cant boot up safe mode. please can someone help me.
Intel Core i5 2500K 3.3GHz
8GB
Nvidia GTX 560
anyone?

Read other answers
RELEVANCY SCORE 122.4

Greetings,
 
I have a Dell Latitude running Windows 7 x64 Enterprise that is suffering from the Black Screen of Death.  I cannot boot into SAFE MODE (or any other mode) whatsoever.  I have the drive hooked up via a SATA to USB converter and have noticed the following 3 files at the root of the C: drive:
 
bootsqm.dat
KBSERVICE.SHUTDOWN
ntuser.dat
 
I have run Combofix and Malwarebytes on the machine that the bad drive is attached to, but neither program found anything.  The KBSERVICE.SHUTDOWN file has a modified date very similar to the time that the computer first had the problem.
 
Any advice would be greatly appreciated!
 
Thanks,
Andrew

A:Windows 7 Black Screen - no safe mode available

DISREGARD.  User has opted to salvage data and reload Windows.

Read other 2 answers
RELEVANCY SCORE 122

I was wondering if there was anybody out there who could help me diagnose this problem. I am running Windows Vista Home Edition in 32-bit, and my computer has been freezing up since early yesterday. It runs perfectly fine if I run my computer in Safe Mode (it even runs perfectly fine in Safe Mode with Networking), but if I boot the computer normally, it will eventually freeze up. When you boot it normally, it seems to be working fine for about 2 or 3 minutes, and then whenever I open ANY window or program (internet browsers and Windows Explorer windows included), it will freeze up after about 30-60 seconds. I end up having to manually power off my laptop, and when I boot it up again a Disk Check utility comes up. I have run this utility twice and the first time it found corrupt music files, and the second time it found some corrupt .dat and .ini files. I don't remember what indexes those were from, or even the names of the files. I have run Avast Antivirus in a Boot Time Scan and it did not find any viruses.

If there are any steps I need to take or any programs I need to run, I'm more than happy to try them out. Thanks!

- JP

A:Windows Vista Freezes Up When Not Booted in Safe Mode

hellothis article explains how to find out what is loading and causing your problem.(hopefully) http://support.microsoft.com/kb/331796good luck

Read other 5 answers
RELEVANCY SCORE 122

Hi, i am suspecting computer got hit by a trojan. After entering the loading screen with the XP LOGO and the loading bar, the system hangs.
Same thing happens when i boot using last known good settings.

Below is the HJT
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 12:21:52 PM, on 03/02/2010
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16981)
Boot mode: Safe mode with network support
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\AVG\AVG9\avgchsvx.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Internet Explorer\iexplore.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Documents and Settings\Ower\Local Settings\Temporary Internet Files\Content.IE5\3TCJF1SU\HijackThis[1].exe
C:\PROGRA~1\FREEDO~1\fdm.exe
C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.exe
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://g.msn.com/0SEENSG/SAOS01?FORM=TOOLBR
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://g.msn.com/0SEENSG/SAOS01?FORM=TOOLBR
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://go.microsoft.com/fwlink/?LinkId=69157
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http://go.microsoft.com/fwlink/?LinkId=54896
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = ... Read more

Read other answers
RELEVANCY SCORE 122

I'm new here and in hopes of getting this resolved. I just installed the new Norton Systemworks 2005 and rebooted after installation. When the boot screen got up to the blue screen with the Windows XP logo before displaying the login names where you put in your password, it just stops. I restarted a few times and waiting a few more times thinking it may need to 'finish' installing. But each time gave the same results. Finally, I went in with 'Safe Mode' and got in with no problems. Tried again in normal mode after looking around for any obvious problems (none found)... back to square one. Tried again in 'Safe Mode with Networking' and it failed like normal mode so I suspected a networking problem??? The last thing I tried which made me mad is that I tried to uninstall Norton Systemworks in 'Safe Mode' and that failed!! Anyone in these forums know the cure? :dead:
 

A:Unable to get to login screen, works in Safe Mode but in Safe Mode w/ Networking

Just a thought

Safe-Mode
Start \ Run \ msconfig \ diagnostic startup
disable any services attached to your most recent install and restart
should get warning next boot about using msconfig, its ok
One key service that needs to be available is the installer service
Try the uninstall, if doesn't complete
Try the uninstall string in the registry only if you know what you are doing

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall

Under it you will see a list of installed programs. Some don?t show up as words but you can figure out what they are by looking at their values. What you are looking for is the uninstall string. Double click that key as if you were going to modify its value. Do a CTRL + C to copy and then exit the registry editor.

Go to START \ RUN and paste the uninstall sting and hit enter. This should launch the uninstall.

Just a thought though as I am not infront of a test system at the moment. You should research this a little further so you have a clear understanding of what you can and can't do with msconfig.

or simpler yet

Safe-Mode

Start \ Programs \ Access. \ System Tools \ System Restore

Select restore point prior to install of whats giving you the problem.

Again, Good Luck

PS If you try to install it again, turn of antivirus and other open programs etc..
 

Read other 1 answers
RELEVANCY SCORE 122

i have windows home xp edtion on parkard bell.in safe mode it is fine,but when on normal bootup mode it will hang up after 2mins aprox(then restart saying crit error,check hardware etc and being to dump files kernel),on a blue screen.

i tried a different graphics card,but no joy.so i replaced the hdd drive and put a fresh copy of windows xp pro edtion on,but it loads all the files(i have not pressed f6)i just let it run its course on the disc,then it hangs up on the blue screen again with the words(crit error 0x0000007f)check hardware etc and if this is the first time you have seen it try starting windows again.

Thankyou for all your time.
 

A:Solved: xp safe in safe mode fine...mormal mode blue screen

Start in Safe Mode and look in C:\Windows\Minidump for crash log files with a dmp extension, like Mini071008-01.dmp. Zip 4-5 of the latest ones and post here as a ZIP or RAR attachment. The log file contains information useful to determine what caused the error, most likely hardware.
 

Read other 2 answers
RELEVANCY SCORE 121.2

Hi,
 
I have an HP G72 laptop that has Windows 7 Home Premium OA. Since March 14, 2013 it's showing me the black screen right after I login. Only the cursor is there and it's movable. It all started when I installed the Win7 Service Pack 1 on March 13. Before that, I would get a message that Scan/Check Disc couldn't be opened because of some recent update but it would go on without any issues. I thought that updating it again would fix that problem. It just game me more. It was also black in Safe Mode. 
 
I tried the System restore via the command line but failed. It said that my Anti Virus (Avast! Free) was running. The oldest restore point was March 3. It said that it failed to extract a file related to Avast!. 
 
I tried pulling out the Task manager be it wont open. it's giving me this message:
 

 
 
I tried sfc /scannow and it found/did nothing.
 
I did Startup Repair, Last Good known config and got the same result. 
 
Help?
 
 

A:Windows Seven Black screen after login even in safe mode.

UPDATE:
 
Safe Mode is showing/working now. I can see my destop back the background is in black.

Read other 1 answers
RELEVANCY SCORE 121.2

Hi everyone,As the title suggests, I'm getting a black screen after the windows logo appears. At first, there's no cursor, but if I put the computer to sleep and turn it back on, I get a cursor when it wakes up--still a black screen though.Here are my specs:CPU: AMD Hexacore 1090TRAM: 8GB GSkills RipjawsMB: Gigabyte GA-78LMT USB3GPU: MB Integrated Radeon 3000 SeriesUnbootable HD: Seagate 2 TB Barracuda Windows 8.1Bootable HD: 7 year-old 500GB Hitachi Windows 8.1Here's how it went down: I was watching HBOGo on Chrome, then went to the Netflix Windows 8 app (don't judge my lethargic chain of events). However, Netflix immediately closed and wouldn't start. I figured it was something with the graphics, so I restarted my computer. After the restart, for some reason, it ran Chkdsk on my other HD. After running that, it went through my normal startup and blacked out after the logo. I ran a bootlog and found that dxgkrnl.sys loads once, then attempts to load another 4 times and fails each time. Other than that, everything loads correctly. Then I deleted some AMD stuff (perhaps stupidly) and I get more errors in the bootlog, from AMD stuff. I'd like to just clear all the AMD stuff and just have the bare Windows drivers load.Here's what I've tried:1) I've tried startup repair, which attempts some fixes, but fails.2) I tried to enter Safe-mode and low graphics mode, the computer simply launches into "Automatic Startup Repair" and fails after the "Diagnosing PC" dialogue.3) Reset my BIOS... Read more

Read other answers
RELEVANCY SCORE 121.2

Webroot found 2 trojan horse virus and remove them. Rebooted found more and removed them, then rebooted, to a black screen. 500 Gbyte SSD Scandisk extreme pro.

I can boot into advanced options, but startup options is not available (no safe mode).

Used my rescue disk to enter cmd line and used things like scannow, chkdsk and diskprt to test the disk. Not errors listed.

Used rescue disk to try to reset windows while saving my data... Get an error about a missing partition, but diskprt shows an 8 Gbyte partition and an approximately 480 Gbyte partition, which contains my installation and data.

Used windows 10 install disk to reset the os, got a missing partition error.

I used a similar SSD and did a clean install of Windows, to verify that the bios and hardware are ok. Having trouble getting the ASUS Sabertooth x79 audio working. Driver issues.

I ran Anvi Rescue Disk "Scan", it did not find any Threats on the windows 10 disk.
I then ran "Repair" and it found problems, with everything except Windows Firewall.
 

A:Windows 10 No Safe Mode, Login to black screen

bradcarvey said:


Webroot found 2 trojan horse virus and remove them. Rebooted found more and removed them, then rebooted, to a black screen. 500 Gbyte SSD Scandisk extreme pro.

I can boot into advanced options, but startup options is not available (no safe mode).

Used my rescue disk to enter cmd line and used things like scannow, chkdsk and diskprt to test the disk. Not errors listed.

Used rescue disk to try to reset windows while saving my data... Get an error about a missing partition, but diskprt shows an 8 Gbyte partition and an approximately 480 Gbyte partition, which contains my installation and data.

Used windows 10 install disk to reset the os, got a missing partition error.

I used a similar SSD and did a clean install of Windows, to verify that the bios and hardware are ok. Having trouble getting the ASUS Sabertooth x79 audio working. Driver issues.

I ran Anvi Rescue Disk "Scan", it did not find any Threats on the windows 10 disk.
I then ran "Repair" and it found problems, with everything except Windows Firewall.Click to expand...

There are/were issues recently with Webroot...not saying that is the cause but I believe the simplest way to get up and going is to do an emergency boot with your backup software...(hopefully you have)
 

Read other 3 answers
RELEVANCY SCORE 121.2

My windows xp screen would turn black when i boot. It happens right before the blue welcome screen.
safe mode and safe mode with command prompt works. when i try safe mode with networking, it loads the system files but after that, there would be weird symbols and colors blinking.
i also replaced the hal.dll with the one on the windows xp cd when i got hal.dll is missing/corrupt message before. Maybe that could be the problem?
 

A:Windows XP black screen and safe mode error

Mine did this when the desktop resolution was higher than what my monitor would support. My LCD would go blank (black) and I would see nothing. The computer seemed to be running in the background however. Have you tried adjusting your video settings via Safe Mode and starting with something like 1024x768?

It may help if you let us know what type of Video Card you have, what type of monitor etc.. I notice you haven't filled out your system information in your profile.. this may be a good opportunity, as it would give a bit more information to use while we try to think of things to try.

Thanks,
Jay
 

Read other 1 answers
RELEVANCY SCORE 120.8

Recently, I accidentally clicked on a few bad google links. Soon after, my computer started acting weirdly. I started receiving windows notices saying that my computer was infected with spyware. I could tell that these were fake and started scanning my computer with avast anti-virus. It was acting weirdly and then I saw that a window popped up called "vista anti-virus" i then googled this and found that this was a fake anti-virus that would install more viruses on my computer. So, I panicked and manually shut down my computer with the power button and booted into safe mode. I then scanned my computer with avast and spybot s&d. It removed as many trojans, spyware, and adwares that it could find, except a few, the only which of that i remember was a trojan called smit.fraud. So I googled smit.fraud and found that it could be fixed with this tool: http://siri.geekstogo.com/SmitfraudFix.php . After running this, i thought that my problems would be fixed. So, I booted normally and I could still see some icons from the virus like Privacy Protector, Fetish Pics, and weirdly, ESET Nod32 anti-virus, none of which I (deliberately) installed. Then, all of a sudden I saw that my computer had completely frozen up. So, I rebooted, and after a minute or so the same thing happened again. I booted once more and yet again, the same thing happened. So, I tried to log into safe mode, and to my horror, I could not log in and an error popped up saying something to the effect that win... Read more

Read other answers
RELEVANCY SCORE 120.8

When I boot the computer will sometimes freeze and stutter and it will always fail to open anything at all from Firefox to even just Notepad and such. From googling around and checking it out myself most answers point to Malware but I have tried a multitide of Scans and fixes suggested to me and none have managed to fix the problem at all, I'm beginning to think perhaps Malware is not the cause of the issue at all, I really have no idea. Booting in Safe Mode with networking has allowed me to come here and ask for help just fine. Does anyone know what could be causing the issue and what I could do to find and fix the problem?

A:Windows boots, but no programs will execute unless booted in Safe Mode

Welcome,
Have you tried a startup fix using the installation CD?
Keep us posted

Read other 2 answers
RELEVANCY SCORE 119.6

Hey everyone!
Sorry if I'm posting in the wrong place - not sure what exactly is wrong!
So my computer was working - I was playing a game when the system just froze up. I manually restarted and once I got to the Windows XP logo screen (where the blue dots go running across in that little bar underneath), the computer just stayed on that screen no matter how long I waited. I've restarted several times and still keep getting stuck on that screen.
I tried going into safe mode to see if I could maybe do a system restore or just look to see if I could figure out what's wrong, but all I get is a black screen with "safe mode" in all four corners of the screen and my mouse cursor. Same thing when I try to go into VGA mode.
I'm wondering if my video card died? The computer runs fine if I'm just doing normal things like watching a movie or just surfing the Internet. However, I'll play a game and often times it'll do the freeze-up thing and I'll have to restart. But every time that has happened, the computer started back up normally - until now. Any help would be appreciated. Thanks so much!

A:Hanging at Windows XP Logo Screen - Black Safe Mode

Do a WinXP Repair install. It repairs critical files and does not erase personal data. Go here ... http://michaelstevenstech.com/XPrepairinstall.htm .

Read other 4 answers
RELEVANCY SCORE 119.6

Hi All,
 
I've been having some problems with computer recently.  First, while gaming, my computer crashed.  I'll save you the details, but eventually it got to the point where when I would try to boot, I wouldn't even get a signal to my monitor.  I eventually guessed that the processor had failed.  I purchased a new one and installed it (along with a cooler master fan and heat sink) last night. 
 
But now when I try to boot up, I get the error message that windows was unable to boot.  I then have the option of either running the repair tool or starting windows normally. I've used the repair tool twice, and it hasn't worked either time.  I get the message that "startup repair cannot repair this computer automatically."  The problem event name in the log is "StartupRepairOffline."  I've also tried restoring to a point where my computer worked correctly, and that didn't work either.
 
When I try to start Windows normally, I get the "Starting Windows" screen, then the screen goes black.  The monitor is illuminated, but the screen remains black.  I can tell at that point also that the keyboard is unresponsive (i.e. num lock and caps lock don't work).
 
When I boot up, I am able to boot into BIOS, but I can't boot in safe mode.
 
Any help would be greatly appreciated. Thanks! 

Read other answers
RELEVANCY SCORE 119.6

Hello everyone.

I've had great success with computer problems here in the past and am hoping someone can help me out again. I've read through some of the 'booting to black screen' posts on here, and it seems like I need a Windows XP recovery disk, which I do not have.

A little bit of info on my problem:

I was given a Gateway desktop by a friend when it stopped working for her and she bought a new one rather than dealing with it. She is not a computer person at all, and could only tell me that it stopped working, no other specifics. When I try to boot the computer, the Gateway screen comes on for a second or two, then it goes straight to black screen. I've tried hitting F2 or F8 or F10, but nothing happens. My friend says that she doesn't think that the computer came with a recovery disk, or if it did, she doesn't have it any longer.

Is there anything else I can try, or do I have to get my hands on a Windows XP disk? I don't think I know anyone who has one, so is there anywhere that I could get one online?

Thanks in advance,
~MR

A:Windows XP booting to black screen, won't enter safe mode

Black screen...black screen with cursor in upper left corner?Black Screen (fixmbr) - http://support.microsoft.com/?scid=kb;en-us;314503 The XP Recovery Console can be downloaded as an .iso file and then burned to CD...which, in turn, allows it to be used to access the Recovery Console commands. What's the model number of this desktop? Should be on the case.Louis

Read other 10 answers
RELEVANCY SCORE 119.6

Hi,

My when i start my computer its a black screen and says

Checking file system on c:
file type system is ntfs

I have pressed f8 and tried to load safe mode but its says its loading with loads of writing on the screen but just stays on that and doesnt load.

I have also tried all the other options when u press f8, boot from hard drive etc etc and all leads me back to thr black screen with the checking file system c.

I have a windows boot cd which enable me to boot in to something called mini windows xp but this is very basic and only enables me to access the internet.

Please help its driving me up the wall

A:black screen and windows wont boot safe mode. please help

Mini Xp might be Hirens boot cd do not use it. We do not recommend it here, and we do not give out advice about hirens boot cd.

Try going back to the Safe Mode boot option screen select Advanced then select your lanuage then select "Repair your Computer" then select more options then select Command Prompt .

Type in then hit enter.

CHKDSK C: /R

this will attempt to repair any errors let the process finish.

Read other 15 answers
RELEVANCY SCORE 119.6

Hello all,
 
    I am currently experiencing some issues with an Hp Pavilion dv5, running Windows 7 Home Premium. After startup, the windows logo is displayed, and then the screen goes black with only the cursor visible. The cursor is movable. I have tried booting into safe mode, however, the same black screen with movable cursor appears.
I have already tried a number of solutions I found online, and all thus far have failed. I tried pressing control+alt+delete at the black screen, and nothing comes up. I have tried booting in low-res mode to see if a graphics driver was the issue, still only a black screen with cursor. I have tried connecting to an external monitor with no luck as well. I have also ran memtest, and a hard drive test, both of which showed no issues.
 
    I have already ran Malwarebytes offline through Hirens BootCD, and also ran Offline Windows Defender, to get rid of any malware or viruses. I have also loaded a Windows 7 Repair disk and have attempted a Startup Repair (in which it shows no issues), a System Restore (which is unsuccessful), and have also tried booting with the last known good configuration (which also did not work).
I did some more exploring using the command prompt on the Windows 7 repair disk. When I run “bootrec /scanos”  I receive a message saying:
 
“Successfully scanned Windows installations.
Total identified Windows installations: 0
The operation completed successfully.”
... Read more

A:Windows 7 black screen with cursor after startup, no safe mode

Although this was originally issued for Vista, the techniques apply to any HP system and/or Windows O/S, IMO.  I would try the steps outlined.
 
http://support.hp.com/us-en/document/c01634637
 
Louis

Read other 29 answers
RELEVANCY SCORE 119.6

This is my wife's laptop. The problem started recently, about a week ago When she starts the laptop, often (but not always) there is the hp logo, and then the screen goes black. It does not always happen, and sometimes it happens when the laptop has not been used for a few hours.

The screen seems to wrok okay in safe mode, bit has problems in regular mode. The laptop is about 4 years old, came with Vista, but now has Windows 7 premium home edition. I reinstalled windows 7, but the problem has not been resolved.

Grateful for your advice. Should this laptop be discarded? Repairs are quite expensive in Switzerland, and rather than spend good money on an old laptop, I would prefer getting a new one, if an easy solution can not be found. HP G60-235DX Windows 7 (32 bit), 3GB RAM, plenty of free HD space.

Many thanks.
 

A:Solved: Screen is black in Windows, works ok in safe mode

Read other 6 answers
RELEVANCY SCORE 119.6

Hi guys, I've got a nasty virus on a laptop that I cna't get rid of (not yet anyway) I have not yet run HijackThis! or GMER, however I have run ComboFix, it found and deleated a file on the D drive called installer.exe. No changes. Here are the symptoms:

1) When booting into normal startup it takes about 5 minutes to get to the desktop. That is from the time I see the Windows Loading screen until the screen goes black.

2) Once I have officially logged in the screen is black. All I see is the mouse courser. Pressing ctrl alt del does nothing. Neither does pressing the Windows key.

3) Booting into safe mode brings up the desktop and the computer workes fine then.

4) All of the System Recovery files have been deleated.

5) Going to the Avast website brings up the "This site has been marked as harmful and is being blocked" screen.

6) If I make any changes to startup using the msconfig command and then restart the computer the system will hang on the Windows loading screen, restart, and then revert itself back to the way it was before (black screen)

7) I cant run a virus scan (or do anything else) in Avast (this isnt really the virus's fault, avast dosent work in safe mode.)

I'll post the logs of HijackThis! tonight, but I would like if anyone has any suggestions to help me out before then.

A:Windows 7 black screen on startup, have to start in safe mode.

Try going into safe mode with networkingRun MBAM (MalwareBytes):Please download Malwarebytes Anti-Malware and save it to your desktop.Download Link 1Download Link 2MBAM may "make changes to your registry" as part of its disinfection routine. If using other security programs that detect registry changes (ie Spybot's Teatimer), they may interfere or alert you. Temporarily disable such programs or permit them to allow the changes.Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.
For instructions with screenshots, please refer to the How to use Malwarebytes' Anti-Malware Guide.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program before performing a scan.If an update is found, the program will automatically update itself. Press the OK button to close that box and continue.If you encounter any problems while downloading the definition updates, manually download them from here and just double-click on mbam-rules.exe to install.On the Scanner tab:Make sure the "Perform Quick Scan" option is selected.Then click on the Scan button.If asked to select the drives to scan, leave all the drives selected and click on the Start Scan b... Read more

Read other 1 answers
RELEVANCY SCORE 119.6

Hopefully I am in the right place and apologies if not as I am a newbie to any kind of forum posting.  I have researched my problem here and found similar situations but nothing that quite fits or has helped.  Here is all the information that I have and the events that have led up to the black screen problem.
 
Lenovo S510p Touch Laptop running Windows 8.1 which was installed already on computer.
 
A few weeks ago I upgraded to Windows 10 however it caused some issues with emails, power options, etc. that I didn't have time to figure out so after about 1 week I decided to go back to Windows 8.1 thinking I would wait a few months and try again.
 
Everything seemed to be running fine at that point except that my laptop would still not "wake up" when opening top.  I did install updates to drivers and Windows critical updates after moving back to 8.1 with no obvious issues.  Until...I received an email that my Outlook emails would not work properly in Windows Live in a couple weeks unless I installed a certain update, so of course I installed the update.  After that every email I received was from an "Unknown Sender" even after I allowed them.  Because I couldn't find an easy fix for this I decided to restore my computer back to before this update was installed and that's where everything went wonky.
 
After initializing the system restore, the computer said it was working and it may take awhile.  I got busy and after a coupl... Read more

A:Black Screen after System Restore No Safe Mode Windows 8.1

In Windows 8, 8.1, or 10, you have to hold down the shift key while clicking Restart to get to the Troubleshooting and then Advanced Startup options which includes System Restore.
If you are lucky enough to have the power icon on the Welcome screen its not too hard.  If it isn't there, its no fun at all.....
Running a normal system restore (not from the Advanced startup) gives malware the ability to reinfect you during the reboot process.  In the advanced startup, you are running a mini-Windows with none of the usual junk loaded.

Read other 0 answers
RELEVANCY SCORE 119.6

Hi guys, I've got a nasty virus on a laptop that I cna't get rid of (not yet anyway) I have not yet run HijackThis! or GMER, however I have run ComboFix, it found and deleated a file on the D drive called installer.exe. No changes. Here are the symptoms:

1) When booting into normal startup it takes about 5 minutes to get to the desktop. That is from the time I see the Windows Loading screen until the screen goes black.

2) Once I have officially logged in the screen is black. All I see is the mouse courser. Pressing ctrl alt del does nothing. Neither does pressing the Windows key.

3) Booting into safe mode brings up the desktop and the computer workes fine then.

4) All of the System Recovery files have been deleated.

5) Going to the Avast website brings up the "This site has been marked as harmful and is being blocked" screen.

6) If I make any changes to startup using the msconfig command and then restart the computer the system will hang on the Windows loading screen, restart, and then revert itself back to the way it was before (black screen)

7) I cant run a virus scan (or do anything else) in Avast (this isnt really the virus's fault, avast dosent work in safe mode.)

I'll post the logs of HijackThis! tonight, but I would like if anyone has any suggestions to help me out before then.

Read other answers
RELEVANCY SCORE 118.4

Howdy.

A couple days ago I got the ultradefraggerfraud (as Symantec calls it) on my old old Dell Inspiron Latitude D620 running XP Professional. I successfully got rid of it (as far as I can tell all was working properly) by using AntiMalwareBytes in safe mode followed by Ccleaner. Everything was running normally afterward.

When I went to bed and shut down the computer, it automatically installed updates from Microsoft. The next morning, when I turned on the computer which had been working fine before, I got the black screen and blinking cursor. I cannot get into safe mode at all. Nothing happens when I hit f8 or f1 after turning on. All I get is the black screen and a loud beep whenever I hit any keys.

I can get into Setup, but I don't know what to do there (if anything).

Rather than just give up and reinstall Windows XP, I thought I'd try to see if anyone here can help. Since the laptop was working fine before Windows Updates, it makes me think that perhaps there's a simple way (or at least some way) to fix this. I really don't want to have to reinstall from scratch if I can help it. I'm convinced the Windows updates had something to do with this.

Can anyone help me?

Thanks.

A:Black Screen & no safe mode...after cleaning a virus & getting Windows updates

I can get into Setup, but I don't know what to do there (if anything).Do you mean the recovery console?Did you try running chkdsk /r ?

Read other 16 answers
RELEVANCY SCORE 118.4

Hello,
 
The problem: when i power up my computer it goes thorugh its full boot mode.  I get my login screen for password, enter password and then the computer finish it's boot with a black screen and the mouse cursor active.  I can't do anything except move the cursor around.
 
What i can do: I can boot the computer in Safe Mode and have full functionality in that mode (for which i was able to backup personal files).  I tried one function where you can roll the computer back and that didn't work.  I am currently trying 'Startup repair" and waiting for that to finish. It finished and failed: "BadDriver"
 
How it started: It started when a system update popped up on my screen (faded out the main screen ann a dialog box popped up in the center of the screen asking if i authorized this update.  I cannot remember the specifics, but it was for updating some flash drive or something. Like an idiot i absentmindley clicked ok and it ran the update then rebooted my computer and that's when the problem started....
 
Help please!

A:Windows 7 - Black screen w/active cursor but can boot in safe mode

Hello, and Welcome
Can you do a system restore to a date before the system update?

Read other 5 answers
RELEVANCY SCORE 117.6

Okay, here's a little background information.

Bought my PC in 2006. Have had to replace 3 video cards since i've bought it. (One was replaced under warranty, the other I bought).

Since I purchased my PC the only parts I have replaced are: My video card, 3 cards later i'm on my most recent one, EVGA Nvidia 8800 GT http://www.evga.com/articles/378.asp

I also upgraded my PSU to an Enermax Pro 82+ 525w. http://www.directron.com/epr525awt.html

OS: Windows XP SP3

Motherboard : ASUS P5BW-LA http://h10025.www1.hp.com/ewfrf/wc/d...name=c00748726

I mainly use my computer for gaming, after my first video card died i was sent a beefier card http://reviews.cnet.com/graphics-car...?tag=mncol;lst after that my PC was no longer under warranty so I had to buy my next cards my self.


My problem:

I left my computer on while making some food, I had world of warcraft opened. When I finished making food I got back to my computer and moved my mouse to get it out of sleep mode. I run a dual display set up, once my monitors loaded up one of the screens was pure white and the other screen was black. I was forced to hold the power button down to turn off my PC. From there on out everytime I boot my computer up I get my PC's loading screen (which i'm able to acces BIOS or system restore) after my PC's loading screen I get the windows splash screen, after that my monitor is pure black. The PC is still on and running but there's no display. I plugged my monitor into my onboard an... Read more

A:Black screen after Windows splash screen. Unable to acces safe mode.

bump, please help :(

Read other 7 answers
RELEVANCY SCORE 117.6

I'm having a problem with my Dell Dimension 8300, running Windows XP. I have an 80g Maxtor HD as my main drive and a 500g WD secondary drive. When I attempt to boot, I get a blue screen with the message:A problem has been detected and Windows has been shut down to prevent damage to your computer.If this is he first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:Check to be sure you have adequate disk space. If a driver is identified in the Stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.Check with your hardware vendorm for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.Technical Information:*** STOP: 0x0000007E (0xC0000005, 0xF74BB2B2, 0xF789E4AO, 0xF789E1AO)*** FLTMGR.SYS - Address F74BB2B2 base at F74A3000, DateStamp 480251daAs far as the info in the message, I see this screen with the same info everytime I rebooted.As far as disk space, my main drive is 80g aand I have about 20g of free space.I'm not sure if anything in the message refers to drivers. Not sure how to change video adapters when I can't get into Windows (Standard Mode or Safe Mode).Also not sure how to deal with any of the BIOS suggestions (or even know if it's a good idea to mess... Read more

A:Can't boot Windows XP (Standard or Safe Mode), Black Screen w/cursor then Blue Screen

mod bump

Read other 4 answers
RELEVANCY SCORE 117.2

So, here is my story,
Yesterday I wanted to install graphics drivers form Dell website due to some problems that I had.
My laptop info: DELL_Intel Core i7-4500U CPU_RAM8GB_Windows 8.1 .
Graphics Dr.: Intel Graphics Family & AMD Radeon 8850M.
During the installation of a 'new' AMD Radeon 8867 - if I remember well - , my screen started to flash and then got black. My laptop was on with black screen and the cursor flashed. I turned it off, then back on , and it was the same story....nothing.. I pressed Shift+F8 and Nothing.
I can only access to BIOS (F2) or to BOOT MANAGER (F12)... Unfortunately no Safe Mode is an option. In fact, how is it possible to go to safe mode with a black screen on Windows 8??
I would appreciate any suggestions to fix the problem. 
Thank you!

A:Black Screen during boot/Windows 8 - cannot load on safe mode - no Bootable System RE USB

http://www.dell.com/support/article/us/en/19/SLN151713/en

Read other 2 answers
RELEVANCY SCORE 117.2

Hello,
After doing a Windows update, my computer gave a Windows looking message that my hard drive was going bad and to back up my data. I was able to save my user files. Then the pc crashed with a BSOD. I disabled restart after crash. Found the error was 0x0000006B (having to do with a corrupt bootcat.cache file.) Could not boot up windows except for semi windows with my windows 7 disk and Chose Repair, in Recovery console, however it told me nothing could be repaired. Through an option to "find a file" under the Recovery option. I managed to copy a GOOD copy of the bootcat.cache file and I appropriately placed it in E:\Windows\system32\codeintegrity (it was ONLY seeing C: as a system partition) my drive letters were all reassigned.

Sorry this is confusing and a lot of info. Bottom line is, my hard drive is not bad, I see windows on it and all my files and the BIOS recognizes the drive. It is firmly connected and NOT hot to the touch.

From a command prompt I did a bootrec.exe /fixmbr and also /fixboot as the pc was not properly booting up. it still would not boot properly

I am totally unable to go to safe mode (hitting F8) No matter what I do, I get a Windows Splash screen and then my screen goes to a Black Screen with a White arrow cursor, the hard drive appears to be trying to work the light flickers) but it just hangs at the black screen

Again, it refuses to allow me to boot to safe mode. It tries to load the Windows S... Read more

A:Windows 7 splash screen, then black screen NO Safe Mode

sorry for bumping. it seems people get a lot of responses to their questions and i was hoping to get the same kind of response.

Bottom line is, my computer tries to load Windows (7) with the splash screen, then goes to a black screen with an arrow and stays there.

I am unable to boot to safe mode.

I am unable to do a recovery from booting from the Windows 7 Install CD

Read other 3 answers
RELEVANCY SCORE 116

Hello i know u guys prob get alot of first timers asking for help, so if u can please help me id be greatful.

Im running windows xp media center and the other day i noticed after hitting power my pc never went into the desktop it was stuck on a black screen after windows mode, so i tried defrag,reg clean,driver reset/updates,spyware,malware, virus scans and nothing. so i just wanted to try removing my anti virus (webroot internet esstentials) and it booted up fine after removing it in safe mode. so i thinking it was just webroot i installed norton internet security and it booted ounce fine but after the next morning it went black again after windows load and repeated the steps and it worked after i got rid of norton. does anyone have any ideas?

p.s. i did have a malware infection a couple of months ago but my pc has been running great after geting it with anti-maware bytes. and my graphics card is running fine now in norm mode. also of note my pc is showing 2 cd drives, if that might be the prob, my driver updater is also not working uniblue.

A:Black screen after windows load, fine after i deleted my anti virus in safe mode.

Try MSE or Avast. I'd never install either webroot or norton on my pc. MSE and Avast are both free and let me know if it still crashes with one of them. :)

Read other 8 answers
RELEVANCY SCORE 115.6

Windows 8.1
Hi Guys I hope someone can help!

I tried to boot into safe mode so I pressed win key + R got run cmd , typed msconfig and instead of going to "start up" I clicked on "Boot" and "Network" and then "Restart".

Upon restarting I got the "enter password" so I did and now it doesn't recognize it, I have a 4 fig password.
( I did have another P/W which I used when I first got the machine I kept forgetting so I changed to the 4 Fig instead so I wondering if by some weird reason its looking for the old P/W, then I'm defiantly screwed!)

I tried to go in as a guest account but it didn't work either! Well I thought I'll do a complete shutdown and restart which didn't work as well. I rebooted and went F2/Del and after a minute up came the UEFI files I 'm used to the old BIOS boot screens so I didn't know where to start and that's where I am now.

Can someone please keep me?
Update 14:10 Local Time

"The System" is not seeing C drive that's why I can't do anything in either system restore or refresh!
When I tried to re-install windows 8, the partition table that appears so you can choose which to use didn't show C drive at all. The only way in is thru command prompt and I don't know what to type anyway!

Read other answers
RELEVANCY SCORE 115.2

Hi, All of a sudden a day before, my computer froze and when restarted it started exhibiting horrendous symptoms-1. windows logo appear,then2. blank screen and no cursor login etc nothing display just sits thereAfter that, I tried to do startup repair but failed.Coming over to Safe Mode it is working fine.I also tried bunch of repairs from there still nothingused the clean boot from msconfig to see if any software causing issue or conflicts and did a system restore, still nothing.checked device manager and there is no exclamation point either that may depict hardware failure.My recent activity-installed "Advanced System care 9" 2 days back but have now removed using safe mode.1 more point it has been a month since my primary HDD is showing SMART error.but if safe mode is working can't we get normal mode backup and running.Please help me out of this conundrum, Any help would be sincerely appreciated.possible options I have in my mind-1.get new HDD and reinstall os2.format existing HDD and install fresh copy but doubt if this issue might returnreadily looking out for other options and would prefer rectifying old one first so that I can avoid a long tedious process of reinstalling everything from scratch.Sincere thanks to any responses.

Read other answers
RELEVANCY SCORE 114.8

Hi,My Computer which has Win Xp Sp3 is behaving like it is in safe mode , eventhough it is in normal mode .I noticed this because ,1. Avira Antivir Guard and Update cannot be launched bcz Scheduler is not running.2 . I tried to start scheduler ( under services.msc ) , but can't start it bcz of error 1084 ( safe mode situation ) .3 . I can't use Windows Update , bcz of error Error number: 0x8007043C ( same safe mode condition )4 . I ensured that BITS was set to automatic , but it can't run bcz of 1084 error.I have scanned with Malwarebytes, Spybot S&D , SuperAnti Spyware ( in real safe mode) - No DetectionHere is the dds log ,DDS (Ver_09-09-24.01) - NTFSx86 NETWORK Run by Administrator at 16:45:23.03 on Mon 09/28/2009Internet Explorer: 8.0.6001.18702 BrowserJavaVersion: 1.6.0_12Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.510.112 [GMT 5.5:30]AV: ZoneAlarm Security Suite Antivirus *On-access scanning disabled* (Outdated) {5D467B10-818C-4CAB-9FF7-6893B5B8F3CF}AV: AntiVir Desktop *On-access scanning enabled* (Outdated) {AD166499-45F9-482A-A743-FDD3350758C7}FW: ZoneAlarm Security Suite Firewall *enabled* {829BDA32-94B3-44F4-8446-F8FCFF809F8B}============== Running Processes ===============C:\WINDOWS\system32\svchost -k DcomLaunchsvchost.exeC:\WINDOWS\system32\svchost.exe -k netsvcsC:\WINDOWS\system32\ZoneLabs\vsmon.exeC:\WINDOWS\Explorer.EXEC:\Program Files\Avira\AntiVir Desktop�... Read more

A:Safe Mode Error, WinXpSp3 behaves like it is in safe mode even in normal mode

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

Read other 2 answers
RELEVANCY SCORE 114.8

---------------------------------------------------------------
Windows XP Pro SP2
ASUS M2N-SLI Deluxe
AMD Athlon 64 X2 5200+ 2.6 ghz / 2Gb Ram at 800hz
ATI Radeon HD 2600 Pro 512Mb
---------------------------------------------------------------
Hi there,

I cannot boot into safe mode at all,
It will load all the drivers past Mup.sys, next one is D347.sys and Jgogo.sys, after that it wont even load the login screen or the "Safe mode" writing on the corners. I have tried other 2 safe modes as well, and nothing. I have all updated drivers for my M/B and GPU, etc. I also have done spy-ware & anti virus checks and nothing found. I have checked lots of forums and nothing found helps.. I have tried disabling some ports, i.e raid, scsi, on board LAN as I dont use them at all. Still refuses to load... I'm so desperate to find out what it could be. The hard drive thats got the OS is a SATA drive so I cannot plug it in to my other PC as it uses IDE.

Have tried pretty much everything except reformat and repair. And I do not want to format that's for sure, as I have so many updates, and need to install SP2 again and don't have time for it. I have ghost backups, but no point because same problem still exists with those images aswell! And I don't use system restore. ONLY thing recently added is some critical updates.. But don't see why this would cause it not to load.

If any extra info is needed please let me know, I have attached ntbtlog.txt if it ... Read more

A:Safe mode black screen ):-S

Read other 9 answers
RELEVANCY SCORE 114.8

I have an emachines computer and the screen recently has gone black, it works in safe mode just fine with no problems. Can anyone help me figure out why this is happening? Thanks.
 

A:screen goes black unless in safe mode.

Something has likely gone wrong with your display drivers. Try re-installing them in safe mode either from the website of your computer manufacturer or the disks that came with your computer.
 

Read other 1 answers
RELEVANCY SCORE 114.8

Hey all, here is my problem.

I have clean installed my OS 3 weeks ago on new SSD, and it is working alright (I will be posting about few issues I have in appropriate forums later though). Only 1 warning in system event log for Paragon Backup and Recovery (when booting up) and 1 warning in application log for zonealarm leaking 2 registry keys (when restarting or shutting down). According to ZA, this is by design and not a problem.

However if I boot into safe mode I get the black screen with safe mode text in four corners. CTRL+ALT+DEL does work and I can open some applications from Task Manager. Yet explorer.exe is already running and wont matter if I open another instance of it.

Things I already tried:
- Logging off and logging back in (suggested by someone, which worked once 2 weeks ago when I first tried it). Now black screen regardless.
- Creating a new user account (was a normal user not admin) and logging with that. Black screen again.
- Ran sfc /scannow and nothing is wrong.

Waiting for any suggestions, thanks in advance.

A:Black Screen only in Safe Mode

Compare the install you did with the perfect install compiled in Clean Reinstall Windows 7 based on everything that's worked best in tens of thousands of installs we've helped with here, and used by over 1.4 million consumers without a single complaint or return here with problems by those who stick with the tools and methods given.

Otherwise work through the Troubleshooting Steps for Windows 7 starting with Clean Boot, replacing bloatware with recommended free lightweight AV and using Windows Firewall to compare, all checks given for infection, SFC to check for system file damage, resolve repeat errors, and all other steps which go over your install so thoroughly it almost always finds the problem at issue.

Read other 4 answers