Over 1 million tech questions and answers.

Hamachi IP address - new modem

Q: Hamachi IP address - new modem

I have Hamachi running on my Vista operating system to have remote access to a desktop with Windows XP. Everything has run fine until today when I had to replace my modem on the Vista operating system that my wireless laptop runs on. Now, I have Hamachi still installed and running and I can see my remote access to the other computer, however my computer is not able to access the information from the other desktop Windows XP, because I have a new modem and do not know how to configure that new modem with the existing Hamachi.

So, my question is how do I set up the new wireless 2 modem to be seen by the Hamachi VPN network that is currently running all the time on my laptop to read the information on my business partner's desktop?

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Hamachi IP address - new modem

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 53.2

Hey everyone.

I've ran into a problem that I can't quite figure out. My internet connection shows 'no internet access' even though my ISP shows the connection is coming into the house just fine. I usually use a router (NetGear-WNR3500U) but I right now I have the Ethernet connection plugged directly into my PC. I tried directly plugging into my laptop and the internet works just fine. So I know the problem resides in the PC.

Some troubleshooting things I have tried.
-Power cycled my modem, router and PC.
-Repinged my connection from my ISP(Comcast Xfinity)
-Used the reset option on the router and the modem
-I was walked through the internet options needed with the tech support from my ISP to make sure DHCP was enabled and every other setting was correct, and he cleared me that all settings were correct.
-Tried ipconfig commands to /renew and /release my IP
When I tried ipconfig /renew I get the error 'An error occurred while renewing interface Local Area Connection : unable to contact your DHCP server'

-Restored my PC to a restore point where the Internet was working

All of these options did not work.

What I think the problem is and I am not sure how to fix it, when I run the ipconfig /all command my Auto configuration IPv4 Address shows 169.254.112.76 which I was told is a router IP address even though I am plugged directly from the modem to my PC with an Ethernet cord. So I think that's my problem? But I am not sure.

I'd be glad to prov... Read more

A:'No Internet Access' IP address shows router not the modem IP address

That would be your ISPs' address, the router would probably be 192.168.0.1 or 192.168.1.1 so, in the properties, advanced button for the ipv4 of your adapter, make sure both settings are on auto, and add the correct router address in the gateway box.

Read other 4 answers
RELEVANCY SCORE 52.8

Hi,
I downloaded windows 10 and now my IPV4 DNS server and Modem have the same address. I set DNS and IP to Auto in windows 10 and restarted. it will not change. so I can't stay on internet. can anyone Please Help me. Ethernet hookup

Thank-you
Moose

Read other answers
RELEVANCY SCORE 46

Hello I have recently brought myself an ethernet modem but it came without any instructions and I don't know the IP address it is an Asus AAM 6000EV. I think the IP address is 192.168.1.1 but i'm not sure does this sound right? and is there anything else i need to know? thanks. coastymad.
 

A:What IP address is my modem??

yep modem /router
it should have default of 192 168 1 1
found this quicky thing
http://www.adslguide.org.uk/hardware/reviews/2001/q4/asus_aam6000ev.asp
you will need to change the nic settings
was OS are you running and or do search here lots of stickys on setting up your network card
there may be a reset button on it ,if router is used and does not work properly try resetting
 

Read other 2 answers
RELEVANCY SCORE 46

I have already contacted CISCO and they do not have the MAC address because the modems warranty expired in 2015. I have the Cisco 881 Modem, is it possible to hook it up to my computer to view the MAC address?
 

Read other answers
RELEVANCY SCORE 46

I recently installed a DSL modem and hooked it up to my Router. Now both of them have firewalls installed, but if i connect to my modem via the 192.168.xx.xx address, all of my computer mac addresses are listed. why would the modem have that information, when the router is the one who should care...

I have static ips set up for each computer and my router set to DHCP. dont ask why, it just works.

But im worried that all someone would have to do is connect to my modem to get to my computers, they can completely bypass my router, as if it's not there :S
 

A:DSL Modem and MAC address

Read other 14 answers
RELEVANCY SCORE 45.6

Need some help with a problem that just started. My HP G71 laptop, with Windows 7 Home Premium, will not connect to the internet over the wireless modem I have. Other laptops in the house have no problem in fact, that is how I am typing this right now
I checked the iP address and it starts with 169. The research I have done says that is bad...I am not an expert.

This laptop has been giving me fits lately with malware and I have frequently been running Malwarebytes and other programs to remove. I have tried these things based on a youtube video I watched for this issue.:
1. Went to cmd prompt and tried to release and renew ipconfig. Got this message: "an error occured while releasing interface wireless network connection: The RPC server is unavailable.
2. Went to control panel/network and sharing center/change adapter settings then disabled and enable device
3. Went to properties of device, then uncheck QoS packet scheduler, then went bck in and checked it again
4. Went to services and located DHCP client.It is not listed as being started. When I tried to start it, it said : "Windows
could not start the DHCP client service on local computer. Error 1068: The dependency service or group
failed to start.
5. Tried to restore system to previous point from yesterday...did not work, go an error that said system resotre failed to extract the file C:/Windows\$NtUninstallKB62280$\485945278 from the restore point. the restore point was damaged or deleted.

No luck so far. Any ... Read more

A:Cannot connect to modem, 169 IP address

If you would like help with malware ...

Read Everyone MUST read this BEFORE posting for help in this forum and post the requested information here. When I see that you have posted the information I will move this thread to the Virus & Other Malware Removal forum.

Bump your thread there once a day--no more often--until you get a reply. They're kinda busy over there.
 

Read other 1 answers
RELEVANCY SCORE 45.6

Okay I have a D-Link DSL G604T Wireless ADSL Router (revision B3), I works fine it works both with the LAN and wireless parts, I am connected via a ethernet cable on the computer I am using currently and my mums iBook is connected via the wireless.

But it wont give my computer an IP address, It was working fine but recently it stopped working, I am not sure what I did to stop it from working.

I tried connecting via my wireless adapter D-Link DWL-G510 (revision C) and then I moved the modem/router into my room and used an ethernet cable and plugged it into my onboard ethernet port, it wouldn't assign me an IP for that connection either.

I don't have a MAC address filter running on the modem, there is no wireless security nothing on the modem side that blocks my computer.

I tried using static IP's for both a wireless connection and using the ethernet, it connects to the modem, and I can access the modem but not the internet. It appears that when using static IP's it isnt routing me to the world wide web.

So It must be something to do with my computer. I tried to do a system restore, but that doesn't work It goes through the process of restoring, then when it restarts it comes up with incomplete restore cannot complete process or something. I tried multiple restore dates to restore to and none worked.

I would just re-install windows and be done with it, but I dont have any means of backing up data that I dont want to loose

Does a... Read more

A:Modem won't assign me an IP address

The router does not assign you an IP. Your computer is supposed to ask for one. Since the iBook is working OK, your router is responding to DHCP requests properly and your coomputer is to blame.

When you set up the static IP configuration, did you fill in all the data correctly? IP, mask, gateway and DNS exactly as on the working client? (The last octet has to be different for the IP address of course.)

Have you removed any malware recently? It could be that the removal program overdid it. Maybe run WinSockFix..

From your PC, post the output of "ipconfig /all" command.
 

Read other 9 answers
RELEVANCY SCORE 45.6

I'm trying to find the correct information. Hooking directly into a modem is it possible to get a 192.xxx. Now I mean a normal modem. Not a modem router combo or some wireless nonsense. A basic wall then modem into a computer connection. Rebooting the computer and power cycling the modem. Using DSL or cable. Is there any way a person would get a 192.xxx ip address or is the person just not being honest and hooked up into a router?
 

A:Can you get a 192.xxx ip address connected into a modem?

Read other 14 answers
RELEVANCY SCORE 45.6

hi there , hows it going?
was down having a look at a friends computer, xp pro sp2, connected via ethernet -cable modem.
no internet connection, there is a physical connection and ive done the usual troubleshooting procedures

went into cmd and done ipconfig/all

his ip address started with a 192 address as did the default gateway etc.....DHCP is on

blinking 'ready' light on the modem itself, but noting lighting up on the 'send', 'receive' lights on the modem.

im with the same provider and my 'ready' light is on constant.

has he been cut off?? hes adament that it is on

where is this 192 ip address comming from?

ive also tried running the installation cd that came with the modem, it cannot find the NTL network and kicks back an error 800
thanks guys

robert.
 

A:modem assigning a 192 address???

Read other 8 answers
RELEVANCY SCORE 44.8

Assuming they are two separate units and not bridged.
When you ping, tracert or DDoS attack or what-have-you my IP address, who/what do you reach ?
Im understanding that a modem is just a media converter. It's got no IP address of its own.
But then Wikipedia states (under "cable modem"): "With respect to the OSI model of network design, a cable modem is both Physical Layer (Layer 1) device and a Data Link Layer (Layer 2) forwarder. As an IP addressable network node, cable modems support functionality at other layers...] ...The Network Layer (Layer 3) is implemented as an IP host in that it has its own IP address used by the network operator to maintain the device."
If it's not the modem's ip address, are they referring to TR-69..?
A scan of an ISP subnet (e.g NMAP) returns/reaches routers or modems?
 

Read other answers
RELEVANCY SCORE 44.8

I've had a great network for years but then my DI-624 died and I replaced it with a D-Link WBR-2310. It conected to the PC just fine and using DHCP it assigns IP's to the compters. The problem is that the Comcast modem will not give the the WAN an IP or DNS. When I check status the LAN has Host, IP and Gateway. When I check status on the WAN these are blank. Thus, I can't get on the internet using the network. I used the same cables I had with the DI-624 if that makes any difference? So, the network works and the router gives IPs but the WAN has nothing coming in. Help?
 

A:No IP Address from Modem to WBR-2310 router

Read other 10 answers
RELEVANCY SCORE 44.8

I have desktop with Windows 98 SE and I am trying to connect to my cable modem using a network card. My computer can't get an IP address from my broadband service so it assigns an autoconfiguration IP address and I can't get on the Internet.

I have tried two different network cards with the same result. I have connected a laptop to the cable modem and it works fine. I have also connected my desktop via USB to the cable modem and it works fine but I need to use Ethernet so that I can eventually use a router. I have tried uninstalling and reinstalling the network card with no luck.

Does anyone have any ideas what could be causing the problem?
 

A:98 SE can't obtain IP address from cable modem

Read other 6 answers
RELEVANCY SCORE 44.8

I keep getting booted off the internet every few minutes. My modem has been re-programed by the ISP and I'm still getting a bad ip address according to the isp help desk. I also can't connect to the router setting through 192.168.1.254.

Router - Westell Model 2200 DSL Router

Please Help!!

Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Users\Jay>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Jaylaptop
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : ip3networks.com

Wireless LAN adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom 802.11g Network Adapter
Physical Address. . . . . . . . . : 00-18-F3-2D-13-6D
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : ip3networks.com
Description . . . . . . . . . . . : Broadcom 440x 10/100 Integrated Controlle
r
Physical Address. . . . . . . . . : 00-15-C5-AD-71-07
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::547b:2d10:3a38:2291%7(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.97(Preferred... Read more

A:Can't connect to Modem settings ip address 12.168.1.254

Read other 13 answers
RELEVANCY SCORE 44.8

I can ping 169.136.36.18 when my laptop is connected to the company address but I cannot ping it when I am connected to the Cable Modem at home. I can reach the company network using a VPN with no problem.

How do I fix this?

The OS is Windows 2000
 

A:Cannot Ping IP Address From Cable Modem

I remember something about the 169.xxx.xxx.xxx ip addresses being an internal address that windows uses when it can't resolve the dhcp server sometimes. I had it once with windows 98 when we where having cable problems.

You may need to add another tcp/ip protocol for you nic, configure it to use dhcp for the cable modem.

Try here for some info

http://www.wown.com/j_helmig/w2ktcpip.htm#resource

sorry not running 2k yet, just getting ready to install it for a dual boot
 

Read other 2 answers
RELEVANCY SCORE 44.4

Hello, I am currently trying to figure out how to hook up my Desktop computer to the internet. Recently got back my DSL. The computer is trying to get my IP address from my wireless router, rather than the modem itself. It is also showing 0.0.0.0 I have tried to use system restore to go back to when the computer was working properly, but system restore is not able to restore any points. Any help would be greatly appreciated.

Ryan

A:Computer trying to get up address from router rather than modem. Showing up 0.0.0.0.

IP address, not up address! dang phones auto correct! I talked to CenturyLink, my ISP, they told me to contact HP, contacted HP and they told me they could not help me because the computer was 6 years old. GRRR!

Read other 3 answers
RELEVANCY SCORE 44.4

I can't log into my MODEM. I was able to set it up once using the default gateway IP address about a week ago. Then my kids unplugged it and something changed when plugged back in. When I try to log into my modem using the IP address it just gives me a web page saying its unable to connect. My internet works fine, I am able to ping the address and it replies with no data loss, I can trace route to it, I can release and renew the IP address DHCP server. I am just unable to bring up the webpage to login. I have turned off my firewall (windows firewall). I am just at a loss on what to try next. I want to turn on my Wi-Fi and such, essentially administer my router for my computer. I have did a hard reset, held the button for the recommended 15 seconds with both power on and power off but no change. The modem is a Technicolor TC8717T.

Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz, Intel64 Family 6 Model 23 Stepping 7
Processor Count: 4
RAM: 8189 Mb
Graphics Card: ATI Radeon HD 3800 Series, 512 Mb
Hard Drives: C: 55 GB (17 GB Free); E: 596 GB (587 GB Free);
Motherboard: Intel Corporation, DX48BT2
Antivirus: Microsoft Security Essentials, Enabled and Updated
 

A:Unable to connect to my MODEM via IP Address for setup

Edit: I ran the Microsoft Internet troubleshooter and I used the IP address instead of the domain name and it said "The remote device or resource won't accept the connection". So it seems something within the router is refusing to let me connect, but still acting in the MODEM role.
 

Read other 2 answers
RELEVANCY SCORE 44.4

I need to find the configuration address for an Arris modem. The instructions that I have sya that it should be at the bottem of the modem, listed as an "http." address followed by a series of numbers, but there is no "http" info on th modem. Is there a different way for me to find that number?
 

A:Configuration address for an Arris TM502G modem

http://www.ehow.co.uk/how_6067836_troubleshoot-arris-modem-502g.html

In a browser try the following 192.168.0.1 ; 192.168.1.1 ; 192.168.100.1 ; 192.168.1.100.
so will be http://192.168.0.1 or .2 or 1.1 just keep trying

http://www.arrisi.com/support/guides/500_series.asp
 

Read other 2 answers
RELEVANCY SCORE 44.4

Charter up my internet price and told me they would put me on a promo plan if I came in and got one of their modems. I picked up the modem (Cisco DCP3008) yesterday and hooked it up tonight. I had everything connected through my DIR 615 and Charter came up asking me if I was upgrading, etc... needing to verify and so on. I went through that and the last step it said it need to restart the modem to finalize. The modem restarted and came online, however the browser never indicated the processed had finalize. I call Charter, we wired the modem directly to my laptop and got a connection. I thought things were good. I hooked back into the router restarted the modem, all lights came on, started the router and no IP address. I went into setup and clicked clone MAC address and hit save, still no IP address after going to status, dhcp release and dhcp renew.

I reset the router back to factory settings and it still would not pull and IP address. The router worked great before the new modem. Any suggestions to get my router to pull an IP address?

Thank you.
 

A:Solved: DIR 615 will not pull IP Address with new cable modem

Read other 16 answers
RELEVANCY SCORE 44.4

I'm trying to get Ubuntu 8.04 online and to do this I need to know the private IP address of my modem, which is an NEC NTA-3110 ADSL.

The problem is that my network card is detecting a private IP address automatically (169.x.x.x) and this is not quite in the range that I would expect. Normally it is in the 192.168.x.x range. The reason it is doing this is because the router is not offering any private IP addresses.

I've googled extensively. I know this information should be in the documentation or the manual, but the ISP gave me neither. I know I should ask the ISP but they won't have anything to do with Linux. They just tell you to run the Windows set up disk.

If anyone could offer any help on this, I'd appreciate it very much.
 

A:Solved: IP Address of NEC NTA-3110 ADSL modem

Read other 8 answers
RELEVANCY SCORE 44.4

Hi everyone, having a frustrating night getting my ADSL2+ connection going. Just got a Billion 7402G modem/router delivered and I am trying to get it working on an XP PC.

My NIC card works fine, and has the latest drivers. I plug in the modem as described in the manual, and follow all configuration instructions including - Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons.

But I am not being issued an IP address. The manual says this should just be automatic and has no recourse if it is not.

I set an IP address manually within the range of the router, and was able to logon to the modem via the webgui. But no internet access.
Billion support tells me "You should only need to login to router with default settings, navigate to Quick Start page, enter your ISP login details & apply, router should then connect, when finished save config to flash. Nothing else should be required, computer should automatically connect. Ensure that software firewalls aren't blocking access."

OK, so to do this, I need to put in the manual IP address... why is the manual saying to set my LAN connection to obtain IP and DNS setting automatically,and why is this not working for me? Anyway I change the settings to manual and reboot, try the suggestion. All firewalls are disabled.

I have now manually entered an IP address for my PC that allows me to login to the router. Without doing this I cannot even get to this setup pag... Read more

A:Solved: My ADSL modem is not giving an IP address

Read other 10 answers
RELEVANCY SCORE 44

Can't connect to Internet, my modem is dishing out a private IP address and suber class b mask. I need to know the regular IP address and mask for Comcast but I have a feeling the modem is crapping out on me.

A:Comcast modem sb5100 giving private IP address.

Is the address 169.254.0.x ?

A view of your IP address (ipcoinfig /all) will help. You might try restarting your modem, or find out if you're getting a dynamic or static address from your ISP.

You could also have a router/modem combo device. Just realized that you posted the model. Its not a combo device.

More information will be needed to actually help you.

One last thing is to make sure that your ISP can contact your modem. You will have to call them to test the connection.

Read other 2 answers
RELEVANCY SCORE 44

Hi all -
we were happily getting along with our RCN cable Motorola modem and DLink wireless 655 until the last couple of weeks. The internet would intermittently not be available, without warning. First couple of times we power cycled the modem and router, and it worked, but then stopped being available altogether. I got some support from RCN, the cable provider (they own the modem and it's old, so naturally that was my first thought). I now have a new modem and the situation is exactly the same.
The error message that I get is that the IP address for the network cannot be found.

I got internet access by bypassing the router, connecting the modem directly to my (Windows XP) PC, releasing and renewing the IP address, and power cycling the modem. However, the internet still intermittently shuts down, and of course turning off the computer necessitates the whole procedure again. And now we have no wireless.

SOooo - should we assume it's the router, and a new one would solve our problem? Of do we just need to reset the IP address of the router? Or has anyone heard of this and maybe has some light to shed...???
Many thanks
 

A:Cable modem to DLink Router can't find IP address

I got internet access by bypassing the router, connecting the modem directly to my (Windows XP) PC, releasing and renewing the IP address, and power cycling the modem.Click to expand...

Power cycling the modem is necessary when switching the device connected to it; after that there should be no need to power cycle it until the next switch.

However, the internet still intermittently shuts down,Click to expand...

Implies ISP, modem, cable or computer problem. If you have another Motorola modem you have LEDs that give a pretty good idea of what might be happening. And most modems have some LEDs. What are they telling you on the "shut downs"?

and of course turning off the computer necessitates the whole procedure again.Click to expand...

Shouldn't have to do anything but power up the computer. Can you try another computer? If the modem has a USB port can you try a USB connection?
 

Read other 1 answers
RELEVANCY SCORE 44

Please help me!

I can't use my cable modem to access the Internet and can't release my IP address in IP configuration, called custom service and talk with the technical supporter many times, they said there is nothing wrong with my computer setting, and they didn't make any repair or upgrate service in my area, they don't know what happened and can't solve it! <Can you believe that? That's exactly what the guy called technical supporter told me, and they work for earthlink.>

My operation system is WIN98. Please help me!
 

A:HELP! - can't release IP address and can't access Internet through cable modem...

Read other 16 answers
RELEVANCY SCORE 43.2

Okay so I'm trying to connect my Xbox 360 to Live by bridging my computer's wireless connection. I've done this before for a friend in a different city and it worked fine, and I felt very proud of myself for doing so. However when I try to connect here, the modem won't assign my Xbox an IP address. I've been into ipconfig/all and tried to manually assign the same IP address to the Xbox but to no avail. Same deal with the alternate MAC address option. I've been trawling the forums for hours now and I've seen fixes for this exact issue but they haven't worked for me.

I've only got a very basic knowledge of IT and I need help. Who's keen?
To speed things along here's the readout from my ipconfig/all:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\Samsung>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Boyd
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : home

Ethernet adapter Network Bridge:

Connection-specific DNS Suffix . : home
Description . . . . . . . . . . . : MAC Bridge Miniport
Physical Address. . . . . . . . . : 7A-E4-00-60-65-C5
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::ede7:9101:3c79:356%24(Prefer... Read more

A:Xbox 360 unable to obtain IP address from bridged wireless modem through ethernet

What connections are in the bridge?

It looks to me from your ipconfig /all that you may have an ethernet port connected to the Xbox and some other connection bridged with the wireless.
 

Read other 2 answers
RELEVANCY SCORE 40

Hi All. I have Vista os and have been reading about some other kind of os? called Hamachi. Can anyone explain, in plain English, what this really is and how it works? From what I've read is sounds pretty interesting and useful.
 

A:Hamachi?

http://en.wikipedia.org/wiki/Hamachi

It is not another Operating System, it is an application for Windows and Mac that allows VPN connections
 

Read other 2 answers
RELEVANCY SCORE 40
Q: Hamachi

So I recent found my copy of star craft, and loaded it onto my vista rig, running x64 home premium. The only problem i've run into is I can't get hamachi to run and work with starcraft.

I'm using the newest version of hamachi,and when I heard that was my problem so I tryed up update.

I cleaned up after removal with CCleaner before installing the older version. But to no avail.

Any ideas?

Thanks guys

Read other answers
RELEVANCY SCORE 40

let me start by saying all my ports are properly forwarded.
Ive successfully played games using direct IP and Hamachi
But i want to combine the two... I.E.
Im the Host, one pc connects to me using My Hamachi Address, the other connects using my External IP address.
We tried and got as far as the 3 of us sitting in our lobby, but when we go to start the game 2 of us(my self and the pc connecting using my ExIP) get a ready signal while the hamachi ip gets a waiting signal. eventually the game starts with just the two of us playing, myself (host), and the pc who connected using my ExIP. who can i get that third pc in the game.

What i know:
My Ports are forwarded correctly.
The Pc who connected using my external IPs ports are forwarded correctly.
Ive played with the pc running hamachi in a one on one match.
The pc running hamachi has not been able to connect using my ExIP.
any ideas?
 

Read other answers
RELEVANCY SCORE 40
Q: Hamachi

Hi i am using Hamachi it acts as a vpn program if you can t port froward in your router. and i have a server on that. two of the account don't need to have a password and i was wondering how can i make it so that only local network users can log on. the os on the server is xp pro sp2
 

Read other answers
RELEVANCY SCORE 40
Q: Hamachi

Well hey everyone, now before you do ask yes i did search but no one here had my problem, basically i have a weird problem with hamachi that never goes away, i cant ping people other than a computer that is on my internet but even when hes not on my net i can ping him, other computers i try to ping comes up with a request timed out but they can ping me, so basically its a one way ping almost but its really weird, the things i tried to do:
1) uninstall hamachi completely using an advanced uninstaller.
2) uninstalling my antivirus completely
3) disabling my firewall

but the thing is i think my router is blocking it although i cant seem to get on it, i hope you can help me i really wanna play with my friends...

Edit: I managed to get in my router but i still dont know what to do
 

RELEVANCY SCORE 39.6

I have just installed Bitdefender Total Protection 2011 today. Bitdefender, however, will not allow me to use Hamachi. My connection to all of the other users in my server is being blocked by Bitdefender. I configured the firewall settings myself, and set Hamachi's network settings to allow everything. I allowed VPN, set it as a home network, allowed all IP's both ways, and allowed both UDP/TCP. I even tried disabling the firewall, but my problem remains. I do not want to disable Bitdefender, and am trying to find a way around this problem. If anyone else could help me elaborate on this situation, please provide some insight.

A:Bitdefender Will Not Allow Hamachi

Hello, i found some info on the Hamachi programs and it may help you to check your connections further..Quoted from a site : " This process does not work on certain combinations of NAT devices, requiring the user to explicitly set up a port forward. Additionally 1.0 series of client software are capable of relaying traffic through vendor-maintained 'relay servers'. "
I read that here : http://en.wikipedia.org/wiki/Hamachi_%28software%29
I am new here and just trying to help.. hope you get this working.

Read other 1 answers
RELEVANCY SCORE 39.6

So I installed Hamachi on my laptop (Windows 7) a few days ago to play Minecraft with a friend. My internet was working just fine on that day, and the day after. I want on a vacation in a village for a few days and when i came back, i couldnt use the Inernet on my home wifi. My computer and smartphone can use the same wifi without problem. It's been a week and it still doesnt work. I can connect to it, but it has a yellow triangle with ! on it and i cant use it. I've tried uninstalling hamachi, but it doesnt help... If anybody has an idea how to fix it, i would be very grateful...
Sttevan

A:No Internet after Hamachi...

Hi and welcome to TSF try reinstalling the wifi driver avaiable from the latop makers support pages for your model,or try system restore to a point prior to the install of hamachi.

Read other 1 answers
RELEVANCY SCORE 39.6

Right so me and some dudes are trying to play Joint Operations: Typhoon Rising over a Hamachi network. I'll be short:

-We are all behind routers.
-I am not behind a software firewall (the other guys have also most likely turned theirs off).
-Nobody can see anybody else's hosted LAN games, except one person, who can see everybody else's hosted games.
-No, there isn't an option to join a specific IP in the LAN games list (there is only a Search option, which doesn't work for me).
-We have followed all troubleshooting advice on Hamachi's wiki, forwarded our ports, etc. and we all still get the same problem.

To be more specific, here's the troubleshooting page for Hamachi:
http://logmeinwiki.com/wiki/Hamachi:Gaming

1. Once you and your friend have Hamachi set up, ensure you can both ping each other, and chat with each other. If either of these don't work, stop and ensure you've configured your firewall properly. [We can all ping and chat, or at least all our connections are green]
2. Some games are not intelligent when it comes to having more than one network adapter, and you may need to re-prioritize your network adapter order. Go into Network Connections > Advanced > Advanced Settings > and put the Hamachi adapter at the top of the list. [We've all done this step]
3. At this point, see if your game works. If not, check out our game specific articles [The wiki does not have an entry for JOTR]

...

1. Run "rout... Read more

Read other answers
RELEVANCY SCORE 39.6

Hi,

i have recently installed hamachi and was trying to play age of empires 2.
i could not see the game created by my fren but he could see the one i have creted but he could not join error " unable to join",
i have removed all the PC firewalls.
i'm using Beetel 110BXI router for the internet and even router firewalls were disabled.
i tried doing all possible things but of no use.
i did port forwarding and opened all the ports 2300-2400, 47624 TCP/UDP.
i have configured for a statc IP as well. But still i could not play.

please tell me what to be done to make it work, i'm so curious to play at the earliest possible time.

regards,
Naveen.
 

Read other answers
RELEVANCY SCORE 39.6

Okay I've been searching ways to play Age of Mythology online through Direct IP/LAN using Hamachi(not the online version through ESO) I've followed the guide at http://www.cynicsunlimited.com/2007/06/30/tutorial-internet-gaming-with-age-of-mythology-and-hamachi/ till the end. But what next? I've installed Hamachi on both PC's to be used for multiplayer gaming. I have the Hamachi addresses on both machines. Also, when I try to host a game from either of the two computers,the game does detect both the addresses: my actual IP address as well as the Alternate address(given by Hamachi). However, the client does not seem to be able to detect the hosted game.

Once a game had been hosted on one PC, I did this from the other PC:
Multiplayer>LAN/Direct IP>(entered some nickname). In the Type a direct IP field, I entered the Alternate address(or the Hamachi address). Yet after the 15 sec timeout, the hosted game is not visible and I simply receive a message: Could not join a game at the given address. Please try another.

What could be wrong? Many guys seem to have been able to play multiplayer successfully using the aforementioned guide. Where'm I going wrong?
 

A:Age of Mythology with Hamachi help!

Read other 6 answers
RELEVANCY SCORE 39.6

A few days ago I installed (or tried to install) Hamachi as I wanted to play private games with my friends on Gmod. We're all relatively new to Gmod. My friends managed to install it with no problem, but mine hasn't even begun installing yet, despite the fact I tried to install it before they did. The status bar of the installation has been empty for 3 days now, and the fact that I can't cancel the installation to restart it doesn't help either.

I don't know why this is. Have I run out of memory on my pc? Do I need to buy a new one in order to install it? Is my pc too old? I've only been playing on the pc for a few months,and I'm really not sure what to do.
 

A:Hamachi not installing

Hi, Don't believe it would take 3 days to install, possibly 3 minutes.
So first step is to stop the 'install' routine.
If you can use 'Task manager' (so if WIndows 8 it's the three keys pressed together; Ctrl,Alt,Delete) then choose 'Task manager'.
Wait for 30 sec to launch. At the top of the list you should see a line for the installer, right click on it and choose 'End task'.
Now you can try again. You might need to check on the requirements for the program to run on your PC, there might be some files that you need to install first, I really don't know this software though. Someone else might/would know more than I do about this.
Another possibility is that the software didn't even start to install, you might check with your friends about the exact website/link they used.
 

Read other 1 answers
RELEVANCY SCORE 39.6

hi i have a small but really anoying problem with logmein hamachi.
i have 2 computers and when i try to use the browse option in hamachi it askes for a password i don't know which one (i think its remote access pass) or how to change or set it please help me this is really anoying and i know the solution is simple thankyou for your time

A:A problem with hamachi

Discussion of such, as stated in the Forum Rules, is not allowed at Bleeping Computer.No subject matter will be allowed whose purpose is to defeat existing copyright or security measures. If a user persists and/or the activity is obviously illegal the staff reserves the right to remove such content and/or ban the user.This thread will be Closed.

Read other 1 answers
RELEVANCY SCORE 39.6

hello there, i have just recently made the jump to windows 7 x64. Just trying to get hamachi to work, i can ping other pc fine but no one can seem to ping my pc. In network & sharing center hamachi access type is NO internet access!! Hamachi is at the top of the adapter list. help please.

A:Hamachi & Windows 7

Me too, help .
To me i can't ping anybody, the adapter is still at the top of the list, it has acces through firewall and the connection is unidentified. Also i tried with hamachi 2 and v1.0.1.5 and nithing worked.

Read other 4 answers
RELEVANCY SCORE 39.6

yes i'm using hamachi its like a private sever ( kinda like gamespy ) for games, but when i try and log in it just says that my firewall might be blocking hamachi, eventhough i've aloud it to pass threw.

A:Something blocking Hamachi

Was it your software firewall you checked? Do you have a router too as you may need to forward a port.

Read other 3 answers
RELEVANCY SCORE 39.6

I was having the same problem as everyone else in this thread:
http://forums.techguy.org/games/459995-age-empires-2-conquerers-expansion.html
Basically (to reiterate) I can see games, but I can't join them.

At the end, turkishcasa said that he was able to solve the problem by adding Hamachi's mac address to the dmz-zone. My question is fairly simple: how do I do this?
I don't know where to get Hamachi's (not LogMeIn's) mac address, and I don't know what the dmz-zone is or how I can add stuff to it.
 

Read other answers
RELEVANCY SCORE 39.6

I've been thinking about using Hamachi to play a game online which would normally require someone to portfoward. I don't have much knowledge of how it works, so I'd like to be sure I can understand it and be safe using it.

My knowledge of Hamachi is that it creates a VPN (An emulated LAN?) which can be accessed on the internet which allows people to access LAN Functionality as if people were on the same physical network. This would allow me to join others in their games where it normally would require forwarding on the host's behalf.
This would be nice, but I have some concerns/questions.

First of all, how safe is Hamachi itself, and is it stable? I've heard alot about it causing network instability and such - even to the point where people have to reinstall their OS.

Can people view my shared folders? If it is emulating a LAN, would it be possible for people in the Hamachi network to see my folders and documents? Is there a way I can make it private or is this a non issue?

How safe is it in context with other users in the network? If a user who joins the Hamachi group/network has an unsafe/infected machine, can that affect my own machine? Also, are there any exploits in hamachi that can lead to security issues?
I just want to be sure that when I use Hamachi I am solely using it for accessing a multiplayer game, and that my system is secure and my documents and such are private.

I'd really appreciate if someone could answer this, thank you.

A:Questions about Hamachi

For this discussion, a game server might just be a personal computer in someone's home.

When you ask to make a VPN connection to the game server, the Hamachi software on your computer will connect to LogMeIn's server. That server will connect to the game server. If all goes well, there will be a direct connection between your computer and the game server. (Think of it like plugging a really long LAN cable between the two computers.) If a direct connection cannot be established, all VPN data traffic is relayed thru one of LogMeIn's servers.

After installing Hamachi, when you first turn Hamachi on, Windows should ask you to pick a network type. If you select Public, then Windows should not share any of your files.

Any exploits that could take place between computers on the same network can also take place between computers in the same Hamachi group.

Read other 6 answers
RELEVANCY SCORE 39.6

A friend of mine wants to be able to access the resources on his home network when he is travelling with his laptop. Those resources include a network printer and NAS hard drive.

He does not want to use a product like LogMeIn where he is essentially controlling one of the computers at home. In other words, if he connects remotely using his laptop and opens a Publisher file, he wants it to be opened in the version of Publisher that is on his laptop, rather than have it open in Publisher on the computer that is at home.

Will the free version of Hamachi (or some other product) work like this, or does he need a VPN router to do this?

Thanks

A:Hamachi vs VPN router?

Hello,

The easiest way is to remote into a PC on his network. I'm not sure why he is trying to avoid this?

You could do it with a VPN yes. If you did want to do it via a VPN then the simplist way would be to get a VPN router and setup a VPN dial in account for the laptop. Just bare in mind that opening files will take a very long time as they are being pulled across the internet via a VPN... Printing will also be very slow.
Dave

Read other 2 answers
RELEVANCY SCORE 39.6

Hello everybody,

Recently I have been trying, without success, to download Hamachi to join my friend's server in Project Zomboid. When I try to install Hamachi it gets to about 80%, stalls for a bit, and then a small window comes up saying "An internal error has occured." What can I do?

Thanks
 

A:Hamachi Download Help

Where are you downloading from? Try the links below in sequence, #1 first.

https://secure.logmein.com/products/hamachi/
http://www.techspot.com/downloads/2950-hamachi.html
http://www.filehippo.com/download_hamachi/

 

Read other 2 answers
RELEVANCY SCORE 39.6

Hello.

I have a question about Hamachi. In the Network and Sharing Center it says that the Hamachi network (Network 2 on the picture) has No Internet Access. Is this right? Also in the Hamachi window, my icon is grey. Is it supposed to be green?

Thanks, MoRiL

A:Hamachi problem

i have the same question , please tell me if yuo have found an answer!

Read other 3 answers
RELEVANCY SCORE 39.6

I am curious as to the general reputation of the LogMeIn Hamachi software.
 
I have seen it used with several of the "call this number, pay us, and we will fix your computer remotely" schemes. Also I have noticed it being installed in a lot of the logs of infected computers in the "Am I Infected" section as well as infected computers at my office.
 
What do you fellow IT professionals think of this software?

A:LogMeIn Hamachi

LogMeIn is fine software, but it can be used for evil.  It allows you to take control of another machine which can be very dangerous.  If you're looking for a remote control tool take a look at Teamviewer

Read other 10 answers
RELEVANCY SCORE 39.6

Well installed Hamachi a VPN program to trick computer into thinking it was on LAN so I could play a game online with friends.

Ever since I did this no Port 21 FTP connections work...So I can hardly FTP into anywhere but if I FTP into a server with FTP on another server with a different port it works perfect.

So Hamachi installed some thing that is stopping this...I tried to uninstall it but nothing changed..

Any ideas...
 

A:Hamachi stopped all FTP

Do a system restore to before the original installation.
 

Read other 2 answers