Over 1 million tech questions and answers.

Can I use SSD for Tecra A8

Q: Can I use SSD for Tecra A8

Hello,

do you know, if it possible to install a SSD Driver for my notebook?
And if yes, which manufacturer/brand you would recommand?
I want to install Win7 Prof - Anything to take care of? Drivers, firmware, BIOS Version etc...?

Thanks for tips in advance.

kind regards

Peter

RELEVANCY SCORE 200
Preferred Solution: Can I use SSD for Tecra A8

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Can I use SSD for Tecra A8

Generally speaking it should not be a big problem to use an SSD instead of an common HDD.
The notebook supports the SATA interface and you have to use an 2.5? SATA SSD drive.
I cannot recommend any specific brand but in some very rare cases it could be possible that you will need to update the SSD firmware providing by an SSD manufacturer?

Read other 2 answers
RELEVANCY SCORE 41.6

I possess a tecra A10 complete with Windows Vista Business installed (and backed up to an image file using Easeus Todo backup


However I also have access to a Tecra M10 which came with no operating system, although the COA sticker (product key) is likewise for a windows Vista Business.


My question is: would my Windows Vista Business back up from the A10 work on the M10 (ie would it load onto the M10 hard drive and then work properly

If anyone can advise on this matter I would be appreciative please

Best wishes
Ian

A:Can I use Tecra A10 OS disk to install OS on Tecra M10?

At first I must say that Toshiba recovery image is created for each notebook model separately and it is 100% created to work on specific model. Why?
Every notebook model has different hardware platform and all drivers, tools and utilities for certain model are part of recovery image. These recovery images are also tested.

Generally speaking if both models have identical hardware platform (hardware parts) it can be used.

Read other 4 answers
RELEVANCY SCORE 38.4

Dear forum
The above says it all really.

I see the two look similar, but one is smaller. Are these two models different in other ways please.
Ian

A:Difference between Tecra A10 and Tecra M10

Of course the both notebooks are different.
There are different Tecra A10 models and there are different Tecra M10 units.

For example:
Tecra *A10-13B* supports an Intel Core 2 Duo P8400 2,26 GHz CPU and Intel GM45 chipset.

Tecra *A10-1D2* supports an Intel Core 2 Duo T9600 2.80Ghz CPU and Intel GM45 chipset

You can find details about different discontinued notebook models here:
http://www.toshiba.eu/discontinued-products/
Then you can compare all the hardware parts.

Read other 7 answers
RELEVANCY SCORE 30.8

hi, it is possible to have a functionnaly laptop upgrade with win10
TECRA S11-162 PTSE3E
or it is definitively dead ...

it is easy and no time eating for upgrade windows ?

thanks

Read other answers
RELEVANCY SCORE 30.8

Hi,

I'm trying one of this popular caddy's that allows me to put a second hard drive in the optical slot bay, I use a Sata to Sata adapter, so there is not really an adapter besides connecting properly:

[http://www.akasa.co.uk/update.php?tpl=product/product.detail.tpl&no=181&type=Enclosures&type_sub =2.5%20Enclosure&model=AK-OA2SSA-BK]

My problem is with Toshiba BIOS that is expecting a ODD device in that Sata port and cames out with a "CD-ROM error", disabling the Sata port.

I have a workaround, if I start the PC, after BIOS post with anything in ODD bay, after starting Windows, I insert the second HDD in the ODD bay, go to "Windows Device Manager" do a "Check for hardware changes" and voil?, the second HDD is working fine, to me this proves a BIOS limitation.

Is there any help, a Beta BIOS or something else, I have the last BIOS 3.00 for this machine installed.

A:Tecra M10-17U use second HDD in the ODD bay

Please check this thread:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=39412

It seems that Tecra M10 does not support an select bay which would allow you to use an 2nd HDD instead of ODD.
As far as I know select bay is supported on Tecra M1, M2, M3, M4, M5, S1, S2

Read other 7 answers
RELEVANCY SCORE 30.4

This is my first post so apologies for any mistakes they are unintentional. Now does anyone know of a method that can use the right alt f4 key to be functional instead of shutting the computer down.

It is a requirement of a game.
Thank you

A:Tecra notebook - Right Alt F4 key

As far as I know ALT+F4 closes the applications but it cannot be used for notebook shutdown.
FN+F4 activate hibernation mode and notebook will be “shut down”.

Read other 1 answers
RELEVANCY SCORE 30.4

I am trying to rebuild a Tecra M3 Model PTM30A-1DD002 for a friend. I have installed Windows XP Professional but each time I try to install a service pack it seems to hang.

I have tried SP1 & SP3 and each time it starts off gets about a minute in and then just sits and does nothing. I left the machine on for a couple of hours and it just doesn't do anything. On SP1 it says it is "backing up files" and SP3 says "Checking Product Code".

Any help would be greatly appreciated.

Thank you.

A:Cannot install SP3 on a Tecra M3

As far as I know Tecra M3 is delivered with WXP SP2 Professional so for WXP installation use Microsoft WXP installations disc with already integrated SP2 or SP3.

Do you have original Toshiba installations disc?

Read other 1 answers
RELEVANCY SCORE 30.4

Tecra M11-17V. I can get a second monitor running, but that monitor shows the same image as the laptop's monitor. I want to have two different documents on view at once: one on the laptop and another on the second monitor.

Is this possible or not possible?

A:Second monitor with Tecra M11-17V

Of course you can do this. All you must do is to use “extended desktop” option.
Test it please.

Read other 1 answers
RELEVANCY SCORE 30.4

Thinking of replacing the exiting ram with
G.Skill Ripjaws SO-DIMM F3-1600C11D-8GRSL 1.35V (Low Voltage) 8GB Kit (4Gx2) DDR3 1600


Not sure it is compatible. I doubt it is compatible to 8gb ram.
Please advice.

A:Tecra M11 - RAM compability

Can you please post notebook full model name (M11-xxx)?
Just to check which chipset is inside and RAM compatibility as well.

Read other 5 answers
RELEVANCY SCORE 30.4

Hi. I've got a failing hard disk in my Tecra, the existing disk is a Fujitsu MHZ2120BH G1. In an ideal world I would swap this disk for a solid state but I'm wary having read of others' problems installing SSDs. Has anyone any experience of successfully (or otherwise!) of doing this. Alternatively, I'm quite content to stick with a HDD but I wonder whether I can increase the size of the disk from the existing 120Gb? I've got some vague memory of having read about a limit on the size this laptop will take. Thanks.

Read other answers
RELEVANCY SCORE 30.4

Is there a description available hoe to remove a harddisk in a Tecra R10 and plugin a new harddisc?

A:Tecra R10 - How to remove the HDD?

Hi buddy,

As far as I know the HDD is placed under the notebook cover and therefore a lot of parts must be removed like CD drive, keyboard, base assy, etc.

In my opinion it?s a tricky procedure and should only be done from a notebook technician because a lot of screws must be removed as well.

Is current HDD defective or why you want to exchange it?

Read other 5 answers
RELEVANCY SCORE 30.4

Good afternoon,

I have a toshiba tecra s11-128 with broken lcd panel.
This model have a lcd screen with 1366*768 resolution.

The same series (example: S11-11d) was also equipped with the HD+ (1600*900) lcd screen

Can i replace it with HD+ lcd panel (1600*900 resolution)?

Thanks for any replies.

A:Tecra S11 - broken LCD

You are right. both models have different LCD displays but the same graphic card. I cannot say for sure but I’m pretty sure that you can use HD+ display with your notebook.

Read other 1 answers
RELEVANCY SCORE 30.4

Hi,

my TECRA A10-1HG PTSB1E does'nt recognize my second HDD who has taken the place of the cd-rom.
i'm using a SATA caddy, and the A10 boot with a CD-rom Error !!!
is it not possible to use a caddy with one TECRA A10?
Anybody have a solution ?

Thanks for your experience return.
Best regards

A:Tecra A10 does'nt recognize 2nd HDD in ODD bay

Hi

I assume the Tecra A10 does not support such upgrade.
The 2nd SATA controller does not seem to support the additional HDD instead of ODD.

But I read about some tricks to get such2nd HDD recognized.
You need to boot the notebook without the HDD caddy in the ODD bay.
After the Windows system has booted up, you could plug/connect the HDD caddy and the PnP system service should recognize the new device.

I think its not the best solution but it looks like it?s the only solution to get such HDD caddy recognized in ODD bay

Read other 4 answers
RELEVANCY SCORE 30.4

I need to (re)format my laptop, I have a Tecra M11-103 with Windows 7 pro 64bit. I received it with only an WXP downgrade CD but no Windows 7 installation CD.

Laptop no longer under warranty. How do I reformat? It seems like I used to have a nero backup software as it came bundled with laptop a long time (and a format under warranty) ago...

Is it possible to get nero again?
Thanks
E

A:How to reinstall my Tecra M11-103?

Hi

According notebook specification your Tecra was delivered with preinstalled WIN7 64BIT PROFESSIONAL and you got additional WXP DVD. Original Win7 recovery image was saved on HDD and using preinstalled Toshiba recovery media creator you have had possibility to back-up recovery image and create bootable recovery installation disc.
How it works is described in user?s manuals document.

I don?t know if you have created this disc but now after WXP installation you need this recovery disc. Of course, if you want to have ?factory settings?, you need this disc. Other way, you can obtain Microsoft installation disc and install Win7. All necessary drivers, tools and utilities you can find and download from Toshiba download page.

I hope you understand the situation but if you have more questions you are welcome.

Read other 1 answers
RELEVANCY SCORE 30.4

Hello,
i want't to upgrade my internl msate SSD 256 GB with a SATA SSD 960GB.

I think i need a new SATA cable. But i don#t find any Part Number of this cable

regards Frank

Read other answers
RELEVANCY SCORE 30.4

Hi,

I try desperately to update the bios of my old Toshiba A4-161.
I think not, because when I want to download the necessities bios, he asks me if I have an ATI graphics card and the other if it is a bios intel.

So I do not know which to choose.

Can you help me.

Here is my information from Driver Genius.


Summary
--------------------------------------
Computer brand: Toshiba Tecra A4
Operating System: Microsoft Windows XP Professional Build 2600
Service Pack: Service Pack 3
Processor: Intel Pentium M 740 (1733.3 MHz)
Motherboard: TOSHIBA Portable PC (Intel 915PM (Alviso-PM) + ICH6-M)
Memory: 512 MBytes (single-channel)
Hard Drive: WDC WD600VE-00HDT0 (57.231 MBytes (60 GB))
Optical drive: MAT****A DVD-RAM UJ-831S (DVD + R DL)
Video Adapter: ATI Mobility Radeon X300 [Toshiba]
Audio Adapter: Intel 82801FB ICH6 - AC'97 Audio Controller [B2]
Network Adapter: Marvell Yukon 88E8053 PCI-E Gigabit Ethernet Adapter
************************************************** **************Intel PRO / Wireless 2200BG Network Adapter (Toshiba mPCI 3B - MoW)
Battery: PA3399U-1BAS/BRS
--------------------------------------
Processor
--------------------------------------
Processor ID: 000006D8
Codename: Dothan
Stepping CPU: C0
Platform CPU: mPGA479M (Micro-FCPGA/FCBGA)
Revision of the microcode update: 20
Heart (s): 1
Thread (s): 1
Initial Frequency: 1733.3 MHz
Current frequency: 798.0 MHz = 6.00 x 133.0 [email protected] V
Temperature of heart processor: N / A... Read more

A:Which BIOS to use with Tecra A4-161?

You can find latest BIOS version on http://www.toshiba.eu/innovation/download_bios.jsp
Choose archive option to get listed all old models. There you can find Tecra A4. Please choose right short model number.

I don?t know which one has your A4. It can be PTA40E or PTA42E.

Read other 1 answers
RELEVANCY SCORE 30.4

After upgrading to win7 and having sometimes a bleu screen when starting up the following happened.

After once more blue screen the laptop does not startup at all.

The only thing happens , is that I see the upstartscreen (in touch with tomorrow TOSHIBA) and icons at the underside of the screen indicating the drives. Then nothing happens any more, it doe not start up.

I can by entering F12 in a new startup procedure change to startup via CD rom, but this also has no effect.

Also it is not possible to enter the bios (esc + F1).

The keyboard is functioning because,after a while every touch result is a short " beep" .

I have removed the battery for a while and tried again with no result.



Can I put my laptop by the trash ore is there a possibility to bring it to live again

Thanks in advance, Jos

A:Re: Tecra S5 does not boot at all

On this virtual way it is not easy to offer some exact diagnostic but somehow I feel BIOS is screwed up.
Disconnect AC adapter, remove battery and press power button for 20 seconds. After doing this connect AC power supply only and start your notebook again.

I don't have this notebook model and I?m not sure about entering BIOS but try also with F2.

Read other 8 answers
RELEVANCY SCORE 30.4

I just bought a Tecra A50-a-1DJ .
The 256GB disk (SSD) looks like formatted :
1,46gb : recovery partition ;
217,47gb : disk C :;
8gb : partition for hibernation ;
11,54gb : primary partition .
I would like divide the C: drive space so that it becomes:
C: 100,47gb
D: 100gb
F: 17gb
I tried it with the built-in Windows (disk management) that with Paragon Partition Magic :
The answer is always that I can't create more than 4 partitions .
As a workaround?

A:Tecra A50-A-1DJ - SSD partition

MiniTool partition wizard may work

Read other 1 answers
RELEVANCY SCORE 30.4

I wonder whether anyone might be able to answer a question for me.

I have a nice Tecra R10-11B and it has been very good for quite a few years. It runs Win XP and does everything asked of it without a problem.

What I would like to find out, though, is whether it is possible to fit a quicker CPU. I have a suspicion that the installed cpu may be permanently fixed and is not replaceable but I would like to find out.

I had played with the idea of replacing the Intel P9400 Core Duo with something a bit new, to allow perhaps installing Win 7 and more memory. There is 3gb of ram installed.

Any suggestions would be appreciated.

parkman

A:CPU upgrade on Tecra R10

The CPU is socked and this means that the CPU is removable.
But the important fact is that notebook manufacturers don?t support CPU upgrade.
One of the main reasons is the BIOS which is mostly modified by notebook manufacturers.

But let?s start with some basic knowledge:
The CPU has to be supported by chipset and BIOS.

So let?s check what CPU would be supported by Mobile Intel GS45 Express Chipset which is part of the Tecra R10-11B
Here on this Intel Ark page you can find compatible CPUs
http://ark.intel.com/products/35505/Intel-82GS45-Graphics-and-Memory-Controller-Hub#@compatibility

But even if the chipset would support new CPU, some compatibility problems may appear because of the BIOS.
However, the Intel Core 2 Duo CPUs ( Montevina Penryn) were equipped in different R10 models, so probably other Intel Core 2 Duo CPUs would be supported.

By the way: the RAM could be upgraded up to 4GB RAM

Read other 2 answers
RELEVANCY SCORE 30.4

Hi. I have a 2007 Toshiba Tecra A9. I am not computer saavy so please excuse me. I have noticed what I am assuming is a fan on the left side of machine will not stop running lately and is hot and computer screen goes black. Took it to local computer person this weekend and paid extra for emergency fee. They cleaned machine out and blew out a lot of dust and cat hair. They found a Trojan - cleaned that up for extra. Today I came home to find fan running on full blast and hot. I don't know what to do now. Any suggestions would be so appreciated. Thank you.
 

Read other answers
RELEVANCY SCORE 30.4

hI

my computer doesn't want to start, I've did f8 and when one by one and it gets stuck
on this
multi(0)disk(0)partition(1)\window\system32\drivers\isapnp.sys

What does this means???

A:TOSHIBA TECRA

Thats part of the motherboard chipset, have you doing a repair on the install via putting the windows cd in and letting it boot up and then going to repair?

Read other 4 answers
RELEVANCY SCORE 30.4

Hello.

I need some help please!

I have a Toshiba Tecra A3 laptop and it keeps shutting down.

It starts and after Welcome logo and antivirus and wirelss icons appear, it shuts down.

I looked up Google, and all i found was that the cooler might be dirty.It is not.
After 5 shut downs it runs perfect. I cannot explain it.
can u help me please ?

Thank you.

A:Toshiba Tecra A3

Hello ritter2881 & welcome to TSF

Just to rule out Windows as the probable cause. Go To: Command prompt and type: sfc /scannow. Insert XP CD if prompted.
Post back.

Read other 19 answers
RELEVANCY SCORE 30.4

My tecra M2 has started to blue screen.

Here is my error:


The system has recovered from a serious error

Error Signature
BCCODE: 1000000a BCP1:FF000008 BCP2: 00000002 BCP3: 00000000
BCP4: 804D9AFA OSVER: 5_1_2600 SP: 3_0 product : 256_1

Error report content
The following files will be included in this error report
C\Docume~1\user\locals~1\temp\wer3896.dir 00\mini042712-01 DMP
C:\Docume~1\user\locals~1\temp\wer 3896 .dir 00\ sysdata.xml



Any help would be greatly appreciated.

Cheers

A:Tecra M2 BSOD.

Follow the article below and post the files here
http://www.techsupportforum.com/foru...ta-452654.html

Read other 1 answers
RELEVANCY SCORE 30.4

Hi,

just a silly question: what is the maximum RAM I can install in a R840-16J.
I have 2x 4 GB now but I wish I could have more....

Thanks,
paulo

A:Re: Max RAM in Tecra R840-16J

You cannot have more. Maximum is 8GB.
You can use 2 x PA3918U-1M4G.

Read other 3 answers
RELEVANCY SCORE 30.4

Hi,

my Fan is running continously and Health Monitor reports Fan Problem. How do I get to the Fan? Where do I get a Service Manual?
I followed the instruction to blow air from outside- as expected this didn?t work
PS: ( if the only answer is that there is no Service Manual and to contact a Service Partner that will be my last Toshiba- from a pro model and its Prices I expect a little bit more)

thx for your answer

Oliver

A:Cleaning of Fan for Tecra A50

Service manaual is not a public document and not free for the download.
I’m sorry if this will be your last Toshiba but don't be sure that another manufacturer will give you service manuals. No one will give you such document.

Notebooks have specific design and it is pretty easy to damage something. That’s the reason why the disassembling procedure should be done by authorized personal only. When you buy TV, auto or anything else nobody will give you service manuals.

Of course you can do with your notebook whatever you will but on your own risk.

Have you tried to remove the dust using compressed air.

Read other 1 answers
RELEVANCY SCORE 30.4

Hello,

does anybody know wihch RAM I need for my Tecra 8000
I need the PA Number

with kind regards

A:Which RAM can I use for Tecra 8000

Hi

The Tecra 8000 is an oldie and therefore it needs RAM modules which are not more used in most notebook models.
As far as I know you need the 144-Pin PC100 SODIMM module.

The part number of 128MB is PA3005U

Bye

Read other 2 answers
RELEVANCY SCORE 30.4

See subject. I'm not able to add another OS on these laptops (I've got 5 Tecra's S5). Windows XP is on the computer now and because I want to format the computer (classified data) I want to add W7.
When I start no drivers were found on non of the 5 laptops.

Does anyone knows about this issue?

A:Cannot add another OS on Tecra S5, but XP is already installed

I assume you get an message about missing HDD while system installation.
Right?

I think you need to add SATA drivers while Win 7 setup.

There is an Intel Storage Manager on the Toshiba EU driver page which contains the SATA driver.
You can find the Tecra S5 drivers in Archive (Product type -> Archive)

Read other 1 answers
RELEVANCY SCORE 30.4

Hallo!

I saw in a Youtube Video, that the SSDs that come as standard are mSATA ones and that there's space for a 2.5'' drive beneath.

So my question is: If I buy a Toshiba Tecra Z50-A-12R, which comes with a 500GB HDD, can I install an additional mSATA SSD as my system drive and use the 500GB HDD as a second drive?

Thanks
Martin

A:Tecra Z50 - mSATA SDD + 2.5'' HDD?

Well, some models are are equipped with an mSATA Solid State Drive (SSD) instead of a
hard disk drive. The computer seems to supports a 128GB, 256GB and 512GB SSD drives?

but as far as I know there is only one SATA controller in order to connect SSD or an HDD.
The mSATA SSD drive is connected to the controller using mSATA HOLDER ASSY.

So such holder assy is needed if you want to use an mSATA SSD drive.
Of course, you don?t need it if you use common 2.5? SSD drive or 2.5? HDD

Read other 5 answers
RELEVANCY SCORE 30.4

Hi!

I'm in a bit of a dilemma. The current Tecra Z50 is extremely close to what I want in a notebook but the thing is, I currently don't really need it and I don't have the time to set it up. So I would buy one and have it lying around until late summer.

If I get one now and there's a new model out in summer, which I like even better, I would be very disappointed but on the other hand if I want to buy one in the summer and there's a new one with less connectors, a glossy screen with one of those extremely high resolutions or maybe without the pointing stick, it would be even worse!

So the question is: What can I expect from the Tecra Z50 in the future? I know that I probably won't get the information I need but I still had to post this.

Thanks!

A:The future of the Tecra Z50?

Future of Tecra Z50?
From my experience, Toshiba releases different notebook series within short spaces of time.
In most cases this applies to the ?everyday home? models like Satellite models.

The product life cycle of notebooks belonging to business segment like for example Tecra or Portege series is much longer? so from my point of few the Tecra Z50 should be available in the next couple of month.

But even if new models would be released, I think that older models should be still provided by some online dealers?

Read other 3 answers
RELEVANCY SCORE 30.4

Hi,

my Tecra A11 with Win 7 Pro 64 and a Mat****a DVD-RAM UJ890AS is not able to burn on a CD-R. CD-RW and DVD is no problem but when trying to burn a CD-R I got following Error Code: 060277-26-2A031000

I tried the solution in
http://forums.toshiba.com/t5/Computer-Troubleshooting/Error-code-380381-26-2a031000/td-p/172666
- without success. There are no upper/lower filter keys in my registry.

I tried CD-Rs from 3 different brands, I tried CDBurnerXP and the Toshiba Disc Creator - always the same error. There is written the track list (copying a music CD) and then the error appears. The CD-R is not usable any more after this.

What can I do? Is it possible to flash the firmware of the DVD-Drive - if yes, where can I get the fw?
Thanks in advance!

A:Tecra A11 - Cannot burn CD-R

Hi

What brands did you try?
I use TDK ?R and they functions properly.

Additionally I recommend cleaning the laser lens using cotton wool tip and alcohol.
Had also problems reading and burning some disks which have been solved after cleaning the lens.

Read other 2 answers
RELEVANCY SCORE 30.4

Dear forum members

The above laptop turns on but does not boot. The power light flashes amber twice and then green.

Please does anyone know what might be be issue in this case.

Please does anyone know if this particular light flash sequence indicates anything in particular.
Any help would be greatly appreciated
With thanks
Ian

A:Tecra A10-16D does not boot

Does the same happen when you remove battery and start notebook with AC power supply only?

Read other 4 answers
RELEVANCY SCORE 30.4

Hello,

i have a problem with my TECRA. The magnesium back cover of this model of laptop is very soft and breakable.
After a few months it's now full of scratches. My question is the following: does exist a way to obtain a new screen back cover of this model of notebook? How can i obtain this kind of spare part?

Thank you in advance.

A:Tecra Z50-A-10D scratched

I’m quite sure that you will be able to order such part from local official Toshiba authorized service provider…

I recommend you to get in contact with ASP and to ask for such part:
http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

Read other 1 answers
RELEVANCY SCORE 30.4

I have a Tecra A9 12T article-nr.: PTS52E-01T02NGR

Because i have a SSD installed i'd like to remove the dvd rom and install a second harddrive.
i bought a harddrive bay with the right conectors, but allways when i start my computer he tells me:
"CD ROM error" and i can't find the option in the bios where i can change form CD-ROM to HDD.
Can someone help me? thank you!

A:Re: Second Harddrive in Tecra A9

Is this HDD bay designed for Tecra A9?
I mean it is original Toshiba part compatible with this notebook model?

Read other 2 answers
RELEVANCY SCORE 30.4

Hi,

i bought the Z40 with a 500 GB HDD. As a replacement i bought the following SSD:

Crucial CT512MX100SSD1 - 500 GB

Unfortunately i didn't get it to work. On the BIOS i can see that the system recognizes the ssd. But neither the restored system boots, nor windows 8.1 Retail installs. Are there any known compatibility issues?

The problems persist whether the bios setting is UEFI oder CSM.

I upgraded to the latest bios version to 3.7, but that didn't change the result.

A:Tecra Z40 - HDD Upgrade

If the BIOS recognize the new SSD drive, then the drive should be visible also for the system.
May I ask you how did you try to install the Windows 8.1 OS?
What installation media did you use?

The Tecra Z40 does not support internal ODD (optical disk drive). Therefore I?m wondering about the installation procedure

Read other 12 answers
RELEVANCY SCORE 30.4

Hello,

I own a Tecra A8-133 (PTA83E-0E403MBT ).
To give a kick to my aging laptop I bought a corsair neutron GTX SSD. Unfortunately, after
many attempts, and some corsair support, it seems the SSD is not compatible with that TECRA.

I'm ready to buy a new one, but, obviously I want to be 100% sure the SSD is compatible this time.

How can I find a list of compatible devices for this laptop ?

As a SATA 1 laptop, I know the performance will be restrained, but I don't care too much.

Any help would be appreciated.


Thank you

A:Compatible SSD for Tecra A8-133

Hi

What?s wrong exactly?

I found some specification of the mentioned SSD drive from Corsair and it looks like the SSD drive is designed to support the latest high-speed standard SATA III (6Gb/s).
But it?s seems to be fully backward compatible with SATA II and SATA I. So it should be compatible?

From my knowledge there are no any special info regarding the SDD dive compatibility.
In some cases the SSD drive manufacturers provides an SSD drive firmware updates and sometimes such update helps to sort out some issues.

Read other 5 answers
RELEVANCY SCORE 30.4

The first three lights come on,when I try to start it . Nothing else happens no noise or anything. I have tried taking battery out,starting with external power only still the same.

Does it sound expensive to fix.

A:Tecra A2 is not powering up

Can you please post a bit more about this machine?
Have you bought it as used one and now you try to fix it?

Have you maybe tried to update BIOS and now you have this problem?

On this virtual way it is not easy to offer exact diagnostic but it doesn?t sound good to me. Maybe is BIOS screwed-up. Repair can be pretty expencive.

Read other 1 answers
RELEVANCY SCORE 30.4

Hi, could someone help me find the right driver for the wireless/wifi driver on my Toshiba Tecra A3X.

Model No.PTA3XE-01C00PEN

SERIAL NO. 56042981H

I am using Windows XP.

Thanks.

A:Need Wi-Fi driver for my Tecra A3X

No problem.
Go to: http://www.toshiba.eu/innovation/download_drivers_bios.jsp

Choose:
-Archive
-Tecra
-Tecra A series
-Tecra A3X
-PTA3XE
-Win XP

Now you will get all drivers for this notebook model

Read other 2 answers
RELEVANCY SCORE 30.4

I want to purchase Toshiba Tecra Z40-A1402 - 14" - Core i7 4600U
This item has 128 gb SSD on it. Is it possible to install a regular hdd on this ultrabook?
Anyone has an idea?

A:HDD upgrade on Tecra Z40

Hi

Is this the right specification for Tecra you want to buy?
As I can see it has 500GB SATA HDD inside.

Read other 6 answers
RELEVANCY SCORE 30.4

Hello

I bought a 1000MB HDD and build in in a TECRA S10-106.
The HDD was not identify.

Have you a answer why?

Thank you for help

A:Tecra S10-106 does not see HDD 1000GB

Sorry, _1000 GB_

Read other 3 answers
RELEVANCY SCORE 30.4

Hello,

i have a question regarding the Ampere usage of the HDD and SSD.
MyvToshiba HDD uses 5V and 800mA. The SSD i want to use takes 5V and 1,6A. Thats double the Ampere used by the HDD.
Will there be problems with the powersupply?

A:Tecra S11-11P switch from HDD to SSD

> Will there be problems with the powersupply?
Why?
In worst case the battery working time would be a little bit shorter due to higher SSD drive power consumption but there should not be a bigger issue?

Read other 7 answers
RELEVANCY SCORE 30.4

My TECRA A7 has a 100GB HD and I wonder if I can replace it for a larger one.
Is it possible and what should I do?

Thanks for any help

A:HDD upgrade on Tecra A7

Hello

Your Tecra has SATA HDD connector so it should not be problematic to use HDD with higher capacity.
I don?t know which one you want to use but HDD between 200 and 300 GB should be good enough for upgrade.

What do you think about that?

Read other 1 answers
RELEVANCY SCORE 30.4

Hello at all,
I have some Problems with the sound of my Toshiba Tecra A10. I already installed the Realtek Audio Driver and I see the little Speaker symbol down on the right side,too.

But I hear nothing. The Device Manager has a yellow Question Mark on "Modem Device on High Definition Audio Bus".

I Installed the Agere Systems Modem, but nothing happened.

Can someone help me and give me a link for this Driver I need.
I use Windows XP.

Hardware Detail:

HDAUDIO\FUNC_02&VEN_11C1&DEV_1040&SUBSYS_11790001& REV_1002\4&9E9AEC4&0&0101

Regards,

A:Tecra A10 - No Sound using Win XP

> I use Windows XP.

Ok, I though similar issues with Win XP on other notebooks with new HD audio from Realtek.
The point is that you need SP2 and SP3!

The SP2 and SP3 provides important fixes and patches for HD audio?
So first of all uninstall the installed Realtek audio driver.
Then install the SP2 and SP3.
Then go to the device manager and delete the devices marked with yellow exclamation mark.
Then reboot the notebook.
Now Win XP should found a new audio device and should ask for the driver.
No you should install the sound driver from Realtek.
Reboot once again? and now the sound should works fine?

Read other 9 answers
RELEVANCY SCORE 30.4

My laptop will not boot up.
When I plug in the PSU the green LED at the front of palm rest (far left LED) flashes slowly on and off.
No other LED lights are on at all. Pressing the power on button produces no effect.

Please can anyone advise what the problem might be with this laptop.

"Perhaps someone knows if that particular "sequence" of flashing is listed as meaning any particular problem lease.

Your kind help in this matter would be appreciated .

Thank you
Ian

A:Tecra A10 won't boot up

Hi
There must be definitely a hardware malfunction.

>"Perhaps someone knows if that particular "sequence" of flashing is listed as meaning any particular problem lease.

Knowing that you can read the blinking code using the following procedure:

The short blinking means 0 and long means 1.
The code might be something like 0001 0001

Error code starts with LSB (least significant bit) therefore the error code has to be read starting with last bit. This means that the code: 0001 0001 would appear as 1000 1000
This code you have to transform in HEX and you will get the error code.

But in my opinion even if you would know what cause this problem, mostly it?s some motherboard malfunction (maybe also a part connected to motherboard like RAM module) and this means that the whole part needs to be replaced.

Read other 1 answers
RELEVANCY SCORE 30.4

Hi All,

I have a Tecra P4 - PTS40A-02100V which will not recognise the new Hitachi 80GB disk (HTS541080G9SA00). The laptop is out of warranty and replacement disk was purchased. This is the second new disk the supplier has sent me. The supplier is an official Toshiba supplier in Australia. Customer has paid ~$400AUD for the disk, so this could be an expensive exercise.

I am able to get a vanilla Toshiba Restore to work on the PC, however our organisation uses a WinPE based PXE boot environment to kick off image and build of Windows XP. Using a generic Windows XP in our environment is not possible.

Diskpart in WinPE will not recognise the disk. Partition Magic and other popular apps will recognise the disk, others won't. I can create an NTFS partition and format. Can create basic MBR and MFT, no luck recognising. Also I can use the disk in a USB caddy in Windows XP on another PC fine.

This new disk will display the same issues in another known working P4. I see no options in BIOS to get around the issue. I have updated the BIOS to v3.20, however the result is the same.

Any clues?

A:Tecra P4 not recognizing new HDD

Hi buddy,

Just for testing: Is it possible to install Windows from Toshiba recovery disk? Have you tested this?

And interesting to know would be what the authorized service provider says about this behavior. Did you ask the guys already?

Read other 6 answers
RELEVANCY SCORE 30.4

Hi all!!!

I'm Tecra A10-11K user and can I upgrade SSD on Tecra A10-11K?

A:Tecra A10-11K - Can I upgrade to SSD

Yes you can :)
You will need to use an SATA SSD drive

Read other 3 answers
RELEVANCY SCORE 30.4

I want to use this old laptop which originally had win98. I managed to put win xp on it, but it is unworkable slow. Today I tried Lubuntu (a linux distributioon specific for oldies) but that too is too slow.

I just want a simple OS to browse.

A:Which new OS can I use with old Tecra 8100?

I don?t know which ?new? OS do you mean but fact is that you have old piece of hardware and if you want to have well working machine you should install supported operating systems ony.

Drivers for them you can find on Toshiba support page - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp in archive

Read other 7 answers