Over 1 million tech questions and answers.

Windows 7 based custom PC reboots unexpected

Q: Windows 7 based custom PC reboots unexpected

Hello, Im new to theese forums, but I bumbed in here while driving down on the google highway, searching answers for my problem.

So, here is the story of my past week.
I decided to update my old computer a bit and ended up buying a SSD for OS, new mobo, new DDR and a new case.
I did a fresh install of Windows 7 Home Premium 64Bit on the SSD and formatted the old partition that was for the Windows installation.
There we no errors during the install.
Now during gaming or running BOINC, my PC just reboots, no BSOD or anything, like complete powercut and restart.
This leaves no error message to the event messages, except for an error that Windows was shut down unexpected.
Ive tried a whole lot of tips and tricks.
One interesting thing was that the computer had restarted while running memtest86+ in Windows, I wasnt at my computer while it had happened, so I do not know if it said anything.
Ive completed Disk Check before Windows boot, Ive done sfc /scannow and it completed 100%.
Ive upgraded my BIOS to the ASUS Latest, NVidia drivers updated aswell, ive returned the stocksettings for BIOS, made sure that there is nothing there to OC it automatically.
Seems like something happens during load usually.
Atm my computer is running memtest86+ v4.2 USB Boot, gonna make sure if its the memory problem.
During the test, Id like to hear if anyone has any ideas on what to test next if the memtest doesnt bring up any problems.
Thanks beforehand,

- H

RELEVANCY SCORE 200
Preferred Solution: Windows 7 based custom PC reboots unexpected

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Windows 7 based custom PC reboots unexpected

1h and 1 pass later, gonna keep it on but doesnt look like memory is the issue here.

Read other 2 answers
RELEVANCY SCORE 56.8

My computer has unexpected reboots. I cannot tell when or why these will happen. However, if I try to run SFC, or repair console or even defrag, the machine reboots on me. I have unchecked the box on the "reboot system" thing but I still dont't get an error or blue screen it just reboots




Deckard's System Scanner v20070318.32
Run by Krista on 2007-03-21 at 15:08:30
Computer is in Normal Mode.
--------------------------------------------------------------------------------

-- System Restore --------------------------------------------------------------

Successfully created a Deckard's System Scanner Restore Point.


-- Last 4 Restore Point(s) --
4: 2007-03-21 21:08:40 UTC - RP4 - Deckard's System Scanner Restore Point
3: 2007-03-20 21:19:09 UTC - RP3 - Removed J2SE Development Kit 5.0 Update 9
2: 2007-03-20 21:18:23 UTC - RP2 - Removed J2SE Runtime Environment 5.0 Update 9
1: 2007-03-20 20:48:41 UTC - RP1 - System Checkpoint


Backed up registry hives.

Performed disk cleanup.


-- HijackThis (run as Krista.exe) ----------------------------------------------

Logfile of HijackThis v1.99.1
Scan saved at 3:09:48 PM, on 3/21/2007
Platform: Windows XP (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 (6.00.2600.0000)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\W... Read more

Read other answers
RELEVANCY SCORE 56.8

For about a week now something strange occasionally happens while I'm using my computer. It suddenly shuts down and reboots completely on it's own.
When it reboots its shows the "Windows was not shut down properly" screen with the "Start windows normally" choice highlighted. I do so and I'm back in business. But I never know when it's going to happen again. Today was the third time during the period I described.
Any idea what's causing these unexpected reboots?
 

A:Unexpected reboots

What version of Windows are you using ? That sounds like a recent version of Windows, like 8 or 10. But you posted in the DOS / other forum? DOS predates Windows 1.0.

Try going into Control Panel > Device Manager and see if there are any yellow icons. If so, see what the error messages says in it's Properties. And try to right click Update the driver.
 

Read other 1 answers
RELEVANCY SCORE 56.8

I am running XP pro and lately have been getting some unexpected reboots. Here is my HJT log....any suggestions?

Logfile of Trend Micro HijackThis v2.0.0 (BETA)
Scan saved at 4:19:49 PM, on 3/18/2007
Platform: Windows XP SP1 (WinNT 5.01.2600)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\AntiVir PersonalEdition Classic\sched.exe
C:\WINDOWS\system32\crypserv.exe
C:\Program Files\Google\GoogleToolbarNotifier\1.2.1128.5462\GoogleToolbarNotifier.exe
C:\WINDOWS\System32\WFXSVC.EXE
C:\Documents and Settings\Krista\Desktop\HiJackThis_v2.exe

R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.google.ca/
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://ca.yahoo.com
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = http://ca.rd.yahoo.com/customize/ie/...arch.yahoo.com
R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Start Page = http://ca.yahoo.com
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Local Page =
R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Local Page =
R3 - URLSearchHook: Yahoo! Toolbar - {EF99BD32-C1FB-11D2-892F-0090271D4F88} - (no file)
F2 - REG:system.ini: UserInit=C:\WINDOWS\system32\userinit.exe,C:\WINDOW... Read more

A:Unexpected Reboots

Hi, can you please follow the instructions in this sticky topic, and then post the requested logs?

http://www.techsupportforum.com/secu...ion2-beta.html

Also, creating multiple posts for the same issue is known as "flooding", and is against forum rules. Please take the time to read them.

Read other 1 answers
RELEVANCY SCORE 56.8

I recently purchased an Acer 5740G notebook computer. Windows 7 Home Premium was pre-installed.After only a few weeks of use the machine began to spontaneously reboot. Sometimes this can occur three or more times at intervals of less than 30 minutes and sometimes it can run for more than a day without any observable problem.I have run a thorough chkdsk on the hard drive, run sfc /scannow and five passes of Memtest-86 v3.5. All of these showed no errors or violations. I have also regularly run "Advanced System Care Professional" and "CC Cleaner" (amongst others) to check and repair registry errors, application paths, etc. I can't see any correlation with any application or process. It can happen in the middle of anything I am doing, or when the computer is idle.Below is a copy of the "Hijack This" log and I wonder of it gives any indication of a system or software problem. I will be very grateful for any help with this frustrating problem.Logfile of Trend Micro HijackThis v2.0.2Scan saved at 1:30:12 PM, on 2/05/2010Platform: Unknown Windows (WinNT 6.01.3504)MSIE: Internet Explorer v8.00 (8.00.7600.16385)Boot mode: NormalRunning processes:C:\Program Files (x86)\IObit\Advanced SystemCare 3\AWC.exeC:\Program Files (x86)\Intel\Intel Matrix Storage Manager\IAAnotif.exeC:\Program Files (x86)\Spybot - Search & Destroy\TeaTimer.exeC:\Program Files (x86)\WordWeb\wweb32.exeC:\... Read more

A:Unexpected reboots

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

Read other 2 answers
RELEVANCY SCORE 56.8

I have a problem, my PC dont work normally, I reinstal Windows because he restart from him self several times till he start up, but now he do it again. I test RAM, try stability test everthing is super acept when I whant to turn him on he make problems. Can someone tell me what to do more??????
I have instal Windows 7 Ultimate 64-bit.

A:unexpected reboots

Before installing Windows 7 did you check that all the hardware was compatible by running the Windows 7 Upgrade Advisor here? : Windows 7 Upgrade Advisor - Download - Microsoft Windows

Read other 7 answers
RELEVANCY SCORE 56

If I try to run SFC, or reinstall XP pro or run trends online virus scanner lately my comp just reboots on me. I am suspecting some form of virus....any thouhgts?

Logfile of Trend Micro HijackThis v2.0.0 (BETA)
Scan saved at 4:19:49 PM, on 3/18/2007
Platform: Windows XP SP1 (WinNT 5.01.2600)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\AntiVir PersonalEdition Classic\sched.exe
C:\WINDOWS\system32\crypserv.exe
C:\Program Files\Google\GoogleToolbarNotifier\1.2.1128.5462\GoogleToolbarNotifier.exe
C:\WINDOWS\System32\WFXSVC.EXE
C:\Documents and Settings\Krista\Desktop\HiJackThis_v2.exe

R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.google.ca/
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://ca.yahoo.com
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = http://ca.rd.yahoo.com/customize/ie/...arch.yahoo.com
R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Start Page = http://ca.yahoo.com
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Local Page =
R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Local Page =
R3 - URLSearchHook: Yahoo! Toolbar - {EF99BD32-C1FB-11D2-892F-0090271D4F88} - (no file)
F2 - REG:system.ini: U... Read more

A:Unexpected Reboots[moved from xp]

Hi whizzkid3

I'll let the malware-experts in the Security forums give you their feedback on the log, they have more experience in HJT logs (they'll give their feedback in your thread over there). I don't see anything at first glance.

Once you get a clean-bill of health from our Security experts:

Try changing a setting: right-click "My Computer", select "Properties", then "Advanced", and in the "Startup & Recovery" section - click on "Settings", then in the "System Failure" section - remove the checkmark from the box "Automatically Restart". If a fatal STOP error is occurring, this will let you see it. Copy it down & post it here.

Also check in your Event logs for errors that coincide with the restarts. Go to the Event Viewer to view the logs - it's in the "Administrative Tools" in the Control Panel (in "Performance and Maintenance" if you have Control Panel set to the category view). To view the details of an Event - right-click it and select "Properties".

Best of luck
. . . Gary

... I noticed that you have had many malware scanners active recently -- have any infections been found recently? If not, what symptoms have led to your wish to reinstall?

Read other 13 answers
RELEVANCY SCORE 56

Windows 2000 occasionally reboots unexpectedly. Any ideas on what the cause might be and how to resolve this issue? My latest Hijack This log is posted here:

Logfile of HijackThis v1.99.1
Scan saved at 10:56:33 AM, on 3/4/06
Platform: Windows 2000 SP4 (WinNT 5.00.2195)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINNT\System32\smss.exe
C:\WINNT\system32\winlogon.exe
C:\WINNT\system32\services.exe
C:\WINNT\system32\lsass.exe
C:\WINNT\system32\svchost.exe
C:\WINNT\system32\LEXBCES.EXE
C:\WINNT\system32\spoolsv.exe
C:\WINNT\system32\LEXPPS.EXE
C:\PROGRA~1\COMMON~1\AOL\ACS\AOLacsd.exe
C:\WINNT\System32\drivers\CDAC11BA.EXE
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\WINNT\System32\cisvc.exe
C:\WINNT\System32\svchost.exe
C:\Program Files\Norton SystemWorks\Norton GoBack\GBPoll.exe
C:\Program Files\Common Files\Microsoft Shared\VS7Debug\mdm.exe
C:\Program Files\Norton SystemWorks\Norton AntiVirus\navapsvc.exe
C:\Program Files\Norton SystemWorks\Norton AntiVirus\IWP\NPFMntor.exe
C:\PROGRA~1\NORTON~1\NORTON~3\NPROTECT.EXE
C:\WINNT\Explorer.EXE
C:\Program Files\Common Files\Symantec Shared\SymTray.exe
C:\WINNT\system32\nvsvc32.exe
C:\WINNT\system32\regsvc.exe
C:\WINNT\system32\MSTask.exe
C:\Program Files\Common Files\Symantec Shared\SNDSrvc.exe
C:\Program Files\Common Files\Symantec Shared\SPBBC\SPBBCSvc.exe
C:\PROGRA~1\NORTON~1\NORTON~3\SPEEDD~1\NOPDB.EXE
C:\WINNT\system32\stisvc.exe
C:\Program Files\Common Files\Symantec Shared\CCPD-L... Read more

Read other answers
RELEVANCY SCORE 56

Toshiba laptop random shut-down about one minute after booting
- PC auto restarts with "DOS window options" ... I chose "Restart"

Windows showed this window (image) ...
Before clicking anything I copied this from the Windows has recovered from an unexpected shut down window

Code:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 3081

Additional information about the problem:
BCCode: 100000d1
BCP1: 000000D4
BCP2: 00000002
BCP3: 00000000
BCP4: 8B3D718B
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\040415-15069-01.dmp
C:\Users\Owner\AppData\Local\Temp\WER-31231-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\windows\system32\en-US\erofflps.txt
Then another another small window "searching for solution (?)" self dismisses
- then all is normal.

I considered lodging this thread on BSOD forum but instructions there emphatically state "only if BSOD"

When I try to open C:\Windows\Minidump\040415-15069-01.dmp ... "Access denied"
- a padlock on 'Mindump" folder
C:\Users\Owner\AppData\Local\Temp\WER-31231-0.sysdata.xml ... I dont know what to do with "sysdata.xml

? Fan is running most of the time ... Read more

A:PC Unexpected shutdown, then reboots itself

Bump!

Read other 5 answers
RELEVANCY SCORE 56

About once a day my screen suddenly goes black and the computer commences a reboot. I can find no common factor in either what I'm doing at the time or how long the computer has been running; it seems to happen at completely random times. I don't think it is an overheating problem as it has done it, though rarely, soon after the initial boot up. It has never done it twice in a session, even when I've been working for several hours. To my knowledge I don't have any programs that do updates followed by reboots except those that remind me beforehand. I've had the problem for several weeks. Any suggestions please?

Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 10 Home, 64 bit
Processor: AMD A4-6300 APU with Radeon(tm) HD Graphics, AMD64 Family 21 Model 19 Stepping 1
Processor Count: 2
RAM: 8136 Mb
Graphics Card: AMD Radeon HD 8600/8700M, 1024 Mb
Hard Drives: C: 199 GB (110 GB Free); D: 248 GB (242 GB Free); E: 15 GB (1 GB Free);
Motherboard: Hewlett-Packard, 2AF6
Antivirus: Avast Antivirus, Enabled and Updated
 

Read other answers
RELEVANCY SCORE 56

Hi everyone,
I'm watching the forum long time as unregistered user. So now my first post is true when the rough came up. As mentioned in the title I'm experiencing unexpected reboots and sometimes BSODs.
More details about my new (1week old) system

Mobo: GA 890GPA-UDH3
VGA: On board ATI4290 +128GB DDR3 sideport memory
CPU: PhenomII X4 965 BE 3,4 GHz
Memory: Corsair Kit 2x2GB CMX4GX3M2A1600C9 DDR3 1600
PSU: CoolerMaster RealPower620W
HDD1: WD640 SATAIII
Keyboard/Mouse Microsoft wireless desktop 5000


Last week I installed my new components build up the pc and install a fresh new W7 Ultimate 64bit. After OS I installed gigabyte drivers. In the mean time windows update took place. so may be some drivers were already installed from windows update. Afterwards I installed AVASt home antivirus.

Later I experienced my first reboot, one hour after a BSOD and so on...
For the record there were no overclocking setting
After reading some related posts I did the following:

1. Manual setting for the memory timings 9-9-9-9-24 and voltage 1,65V as stated from corsair
2. BIOS update
3. Uninstall AVAST / install Microsoft Essentials
4. Download latest drivers from gigabyte and install them.

Still facing the same at least one reboot or BSOD daily. It is random and not after specific software/application excecution.

Finally I downloaded autoruns+Windows7&Vista and collected related files as suggested in other thread.

I had a business trip so i didnt spen... Read more

A:Bsod and unexpected reboots

I see possible malware involved:
Code:
Event[349]:
Log Name: System
Source: Microsoft Antimalware
Date: 2010-09-27T22:30:28.000
Event ID: 1007
Task: N/A
Level: Information
Opcode: Info
Keyword: Classic
User: N/A
User Name: N/A
Computer: Raphael-PC
Description:
Microsoft Antimalware has taken action to protect this machine from spyware or other potentially unwanted software.
For more information please see the following:
http://go.microsoft.com/fwlink/?linkid=37020&name=HackTool:Win32/Keygen&threatid=2147593794
User: Raphael-PC\Raphael
Name: HackTool:Win32/Keygen
ID: 2147593794
Severity: Medium
Category: Tool
Action: Remove
Status: The operation completed successfully.
Signature Version: AV: 1.91.632.0, AS: 1.91.632.0
Engine Version: 1.1.6201.0
Please check with our Security forum to make sure none remains. Follow these directions: http://www.techsupportforum.com/f50/...lp-305963.html

Install these Realtek drivers: http://218.210.127.131/downloads/dow...&GetDown=false

Enable driver verifier: http://www.techsupportforum.com/f217...ed-473665.html

If the BSODs continue, please follow the BSOD sticky again.

...Summary of the Dumps:
Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Mon Sep 27 15:58:54.124 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:21.389
BugCheck 1E, {ffffffffc0000005, fffff800030ac3a4, 0, ffffffffffffffff}
Probably caused by : memory_corru... Read more

Read other 4 answers
RELEVANCY SCORE 55.6

Hi

A tricky one for my first post. Using a Dell Inspiron 530 running XP Pro SP2. various unexpected reboots and BSODs, but will focus on one specific BSOD which occurred on July 25.

User, not me, was working with MS Publisher.

Having followed instructions elsewhere on Bleepingcomputer, I offer the enclosed output from MS Windows Debugger:

[codebox]Microsoft ® Windows Debugger Version 6.9.0003.113 X86
Copyright © Microsoft Corporation. All rights reserved.
Loading Dump File [C:\WINDOWS\Minidump\Mini072508-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows XP Kernel Version 2600 (Service Pack 2) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 2600.xpsp_sp2_qfe.070227-2300
Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055c700
Debug session time: Fri Jul 25 13:27:00.423 2008 (GMT+1)
System Uptime: 0 days 6:03:32.214
Loading Kernel Symbols
..................................................................................................................................................
Loading User Symbols
Loading unloaded module list
............................
ERROR: FindPlugIns 8007007b
*******************************************************************************
* *
* ... Read more

A:Unexpected Reboots, And Occasional Bsods

Thanks for the dump file, it'll help in narrowing down things. The crash occurred in win32k.sys - a core Windows system file. Although this is where the crash occurred, it's not necessarily the reason for the crash.The parameter c0000005 indicates that the crash occurred due to a memory operation. The actual operation was that it was told to access a memory location that did not exist.The process name that it's associated with is spoolsv.exe. This is the Microsoft Printer Spooler Service and is another critical part of the OS.So, in short, there's a problem with a driver accessing memory that doesn't exist and the print spooler is involved in this. So, I'd suggest uninstalling your printer to see if the BSOD events stop. If they do, then download a new copy of your printer driver from the manufacturer's website and install that.If they don't stop, then it's likely that either remnants of the driver remain (and are causing the BSOD) and need to be removed or that there's a corruption in the Microsoft Printer Spooler Service. If the latter, then we may have to resort to SFC.EXE /SCANNOW or a repair install to correct it.Another option is to enable Driver Verifier (without uninstalling anything), and see if it'll force a BSOD which names the driver (you'd have to perform an analysis of the BSOD event to locate it). To enable Driver Verifier, use this link: http://support.microsoft.com/kb/244617Two important points when usi... Read more

Read other 4 answers
RELEVANCY SCORE 55.6

Friends,

First of all, thanks for being here to offer advice. This problem has been driving me crazy.

About two months ago, my relatively new W7 x64 machine started rebooting without warning. Lately the problem has escalated slightly in that it's also occasionally throwing BSODs, though not all that frequently. Please see the .zip file for all the sordid details. The reboots are the really annoying thing: they seem to have become more frequent recently and can happen three or four times a day now. Sometimes they'll even happen if the login screen isn't touched for ten or fifteen minutes after boot-up.

I started investigating this problem by looking at the minidumps and trying to isolate and remove the more obvious possibilities: a rather elderly Wacom tablet (now uninstalled, though it never caused any trouble before November), a new Lexmark printer (which was added to the system in November, also now uninstalled). The uninstallations have made no difference to the reboots, which continue to happen at unpredictable intervals.

The system is a custom build from Scan in the UK, delivered to me at the end of July '10. The processor is an Intel Core i3 530 2.93Ghz (overclocked to I think 6 Ghz.) on a Gigabyte H55M-UD2H motherboard with 4G of CMX memory, Artic Freezer Pro and Akasa Amberfans. There are two Samsung HDs (500G system drive and 1 T storage drive) and two Optiarc DVDs: everything's in an Antec 300 case with a Corsair 650W PSU. Display adapter is an ATI Radeon HD ... Read more

A:Frequent unexpected reboots & some BSODs: help!

Hello and Welcome. : )


Code:
BugCheck C9, {22e, fffff880047d7818, fffff9802361adc0, 0}

Unable to load image \SystemRoot\system32\DRIVERS\wacomvhid.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for wacomvhid.sys
*** ERROR: Module load completed but symbols could not be loaded for wacomvhid.sys
Probably caused by : HIDCLASS.SYS ( HIDCLASS!HidpMajorHandler+0 )

1. Disable Driver Verifier
2. Update Wacom mouse:

wacomvhid.sys Fri Feb 16 12:29:28 2007
WacomVKHid.sys Thu Feb 15 18:10:54 2007
3. Update Intel Management Engine Interface driver:

HECIx64.sys Thu Sep 17 15:54:16 2009

http://www.intel.com/support/detect.htm

If crashes persist AFTER the above updates, uninstall Symantec and install MSE as the replacement.


Crash Dumps:


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [F:\a\Minidump\D M P\DMP\010411-33368-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\websymbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`03202000 PsLoadedModuleList = 0xfffff800`0343fe50
Debug session time: Tue Jan 4 05:27:24.882 2011 (UTC - 5:00)
System Uptime: 0 days 0:00:45.818
Loa... Read more

Read other 9 answers
RELEVANCY SCORE 55.6

Hi! My brand new T460s (20FAS29T00) running Windows 8.1 Pro with lastes updates from Microsoft and Lenovo, reboots from time to time after I close the lid.I've checked the forums and I found a lot of similira cases for older models but not a single solution for that.

Read other answers
RELEVANCY SCORE 55.6

I m having trouble diagnosing a problem.
Im using a 3d program on XP. I was experiencing hangups and crashes and when rendering a frame sequence the computer would crash to desktop or sometimes reboot itself or sometimes just say completed when it wasnt done all the frames. IF any ones knows about 3d rendering then you will know that each frame is rendered seperately to make a sequence of completed frames with the color, texture and lighting baked into a single image frame.

I have a feeling it is hardware but it may also be software. or a combination of both.I think it may be hardware because even in WoRD i was having weird things happen like when i went to paste and copy an image to make labels it was pasting the copied image into the cell but it was appearing as a white box only. but if I saved and restarted the program it would then show the correct image file in full color. As soon as I tried to copy and paste the image again it would do a couple correctly but then it would paste these white blank boxes and I would have to restart the program to see them correctly.????weird i know

I have reinstalled the OS to win2000 and that seemed to fixed the hangups and freezes so far when working in the 3D program. But when rendering it rebooted once so far before it was done the sequence. I have turned off the system failure option to reboot when there is a system failure and so far when testing it doesn reboot itself but it will say my render is completed before it gets alll of t... Read more

Read other answers
RELEVANCY SCORE 54.8

I can't believe that this kind of service exists for free... You must be a very generous group of people!!

I am using a Sony VAIO (VGN-NR498E), with Vista SP1, and Kaspersky Internet Security. KIS has not detected any malware today, although a few days ago, utorrent.exe was identified as "Trojan.generic," and I uninstalled and deleted the file. Additionally, my online banking password was changed last night (There is a small chance that I just forgot what it was, since I've been changing all of my passwords lately.. but I don't believe that is the case). I have only had this loptop for a couple weeks. I got it because my last one was infected with something and I couldn't even start Windows, within only 2 days of it beginning to act funny (I suspected a keylogger)..

Following are my HijackThis log and DSS main.txt (extra.txt attached):

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 3:14:28 PM, on 7/15/2008
Platform: Windows Vista SP1 (WinNT 6.00.1905)
MSIE: Internet Explorer v7.00 (7.00.6001.18000)
Boot mode: Normal

Running processes:
C:\Windows\system32\taskeng.exe
C:\Windows\system32\Dwm.exe
C:\Windows\Explorer.EXE
C:\Windows\System32\hkcmd.exe
C:\Windows\System32\igfxpers.exe
C:\Program Files\Apoint\Apoint.exe
C:\Program Files\Sony\ISB Utility\ISBMgr.exe
C:\Program Files\Java\jre1.6.0\bin\jusched.exe
C:\Program Files\Sony\VAIO Wireless Wizard\AutoLaunchWLASU.exe
C:\Windows\system32\igfxsrvc.exe
C:\Program Files\iTunes\iTunesHelp... Read more

Read other answers
RELEVANCY SCORE 54.8

My computer is randomly rebooting and I'm getting random error messages saying something has shut down unexpectedly. Sometimes when the computer reboots I get a message telling me "Windows has recovered from a serious error". The last time it did this when the machine rebooted it came up to Check Disk and ran a scan, which found nothing.

I've scanned with MSE, MBAM and SAS. I have a complete ghost of the system from the 30th of December 2010.

This machine was recently cleaned with help from y'all but it still seems to be a little flaky.

Here's the link to the last thread on this machine;

http://www.bleepingcomputer.com/forums/topic358905.html/page__p__2006020__fromsearch__1#entry2006020

Thanks in advance for the help!

KC

A:Random Error Messages and Unexpected Reboots

Hello and Welcome to the forums! My name is Gringo and I'll be glad to help you with your computer problems. Somethings to remember while we are working together.Do not run any other tool untill instructed to do so!please Do not Attach logs or put in code boxes.Tell me about any problems that have occurred during the fix.Tell me of any other symptoms you may be having as these can help also.Do not run anything while running a fix.Do not run any other tool untill instructed to do so!Click on the Watch Topic Button and select Immediate Notification and click on proceed, this will help you to get notified faster when I have replied and make the cleaning process faster.Please print out or make a copy in notpad of any instructions given, as sometimes it is necessary to go offline and you will lose access to them.I would like to get a better look at your system, please do the following so I can get some more detailed logs.DeFogger: Please download DeFogger to your desktop.

Double click DeFogger to run the tool.
The application window will appear Click the Disable button to disable your CD Emulation drivers Click Yes to continue A 'Finished!' message will appear Click OKDeFogger may ask you to reboot the machine, if it does - click OKDo not re-enable these drivers until otherwise instructed.IMPORTANT! If you receive an error message while running DeFogger, please post the log defogger_disable which will appear on your desktop.Download DDS:Please dow... Read more

Read other 13 answers
RELEVANCY SCORE 54.8

Hi,
I have no idea what is going wrong.
The model is an Acer Aspire One netbook (10.1 D270).

After a few minutes, it just reboots. This happened recently.

How can I diagnose the problem?

I can see nothing strange in eventvwr.

I would like to try some diagnosis before I try the shotgun trial-and-error approach (system restore, reinstall windows, change hardware).

memory diagnostic and disk checking (the tools that run with a restart) returned no errors.

Any suggestions?

I understand that I haven't provided much info, but I'm not sure what to provide.

There is no BSOD.

I don't believe a minidump is created either.

Temperature is within expected bounds (no higher than 45)

Also happens in safe mode.

Also, the RAM is not original, I'll try replacing the original chip.

If it turns out to be the RAM, what tool/s should I use to verify its integrity?
Also, there is no CD drive. So I need a USB boot utility if anything but the standard windows test (which I ran only with default settings).

A:Win 7 Starter, unexpected reboots, very quick after startup

Hello Silmeria .... though it is not a BSOD, still I'd suggest you to post it following the Blue Screen of Death (BSOD) Posting Instructions. The files obtained this way will help us to have a closer look to the issue.

Read other 2 answers
RELEVANCY SCORE 54.4

This started 2 days ago and has happened 5 times since then.  There have been no warnings/errors/BSOD, just random shut down as if it was an unplugged desktop (laptop with full charged battery).  After crash, reboots to options of safe mode as system did not shut down properly.
 
The specifics: 
 
This is a Dell Inspiron 5737, only 7 months old
 
OS is Windows 7 64 bit Home Premium
 
Everything is updated
 
I have run all system diagnostic utilities available, including CHKDSK, with no errors reported and no issues anywhere
 
Dell tech support lied to me yesterday and told me they fixed it by unchecking the "Automatically Restart" box under "Startup and Recovery" and telling me it was an issue with a windows update that caused the crashes, yet the same thing happened again this morning, so apparently they didn't fix anything and just installed a couple of Dell optimization programs, each triggered AVG warnings and have since been removed.
 
If anyone can tell me what is going on here and how I can remedy this problem I would greatly appreciate it.
 
Thanks...
 
Here is a MiniToolbox report just compiled :
 
MiniToolBox by Farbar  Version: 21-07-2014
Ran by TMoyer (administrator) on 11-10-2014 at 15:34:07
Running from "C:\Users\TMoyer\Desktop"
Microsoft Windows 7 Home Premium  Service Pack 1 (X64)
Boot Mode: Normal
***************************************************************************
 
======... Read more

A:Unexpected shut down and reboots, no BSOD or any other errors/warnings

Please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post.
 
Louis

Read other 21 answers
RELEVANCY SCORE 53.6

Hi

My problems began a while back and I thought I had beaten them but maybe I didn't clean everything as well as I thought.

I frequently run low on hard disk memory on the partition where my OP is located and I have been moving things around between disks to free up space. The PC is often slow and I have presumed that this is a memory problem, however I'm often in the middle of running a program (especially Ad-Aware and Spybot) when the machine reboots spontaneously. I had to run GMER 8-9 times before I got a log.

So herewith my files as instructed:


DDS (Ver_09-03-16.01) - NTFSx86
Run by SD at 10:07:42.32 on Tue 28/04/2009
Internet Explorer: 7.0.5730.13
Microsoft Windows XP Professional 5.1.2600.3.1252.61.1033.18.736.107 [GMT 10:00]

AV: Norton 360 *On-access scanning enabled* (Updated)
FW: Norton 360 *enabled*

============== Running Processes ===============

C:\WINDOWS\system32\svchost -k DcomLaunch
svchost.exe
C:\WINDOWS\System32\svchost.exe -k netsvcs
svchost.exe
svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccSvcHst.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Lavasoft\Ad-Aware\aawservice.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Google\Update\GoogleUpdate.exe
svchost.exe
C:\Program Files\Symantec\LiveUpdate\AluSchedulerSvc.exe
C:\Program Files\Common Files\EPSON\EBAPI\SAgent2.exe
C:\WINDOWS\System32\svchost.exe -k HTTPFilter
C:\WINDOWS\system32\svchost.exe -k imgsvc
C:\Pr... Read more

A:Low memory, slow, frequent unexpected reboots and suspicions that I have a trojan

Hello Snowflake101,

I'm not seeing anything in your logs. If you still require assistance, run this online scan to search for any remnants. It can take some time, so please be patient and allow it to run it's full course:

**Vista users - right click on the IE icon and run as administrator

Using Internet Explorer or Firefox, visit http://www.kaspersky.com/kos/eng/par...avwebscan.html

1. Click Accept, when prompted to download and install the program files and database of malware definitions.


2. To optimize scanning time and produce a more sensible report for review:Close any open programs
Turn off the real time scanner of any existing antivirus program while performing the online scan

3. Click Run at the Security prompt. The program will then begin downloading and installing and will also update the database. Please be patient as this can take several minutes.Once the update is complete, click on My Computer under the green Scan bar to the left to start the scan.
Once the scan is complete, it will display if your system has been infected. It does not provide an option to clean/disinfect. We only require a report from it.
Do NOT be alarmed by what you see in the report. Many of the finds have likely been quarantined.
Click View scan report at the bottom.



Click the Save as Text button to save the file to your desktop so that you may post it in your next reply

Read other 1 answers
RELEVANCY SCORE 53.2

I'm having hard time exporting contact objects from Outlook 2007/2010 into a custom photo ID card creator like this one quickidcard.com. It's a flash based application where data input is in XML format which I can't export directly from Outlook. Right now I'm exporting contacts into csv and parsing into XML. It's good enough when we talk about 20 contacts but when it comes over 50 it takes long time. I tried PST and vcard but it's slower than csv.
Has anyone exported contacts directly into XML?
other office apps use XML so I find it hard to believe Outlook is diferrent
 

Read other answers
RELEVANCY SCORE 52.8

Hi everyone,

I come to you with a rather strange problem. I come to you because I have no idea where to begin diagnosing such a problem. I just ordered parts for a brand new computer, built it, and am now running it very happily. However, within the past few days (the computer was finished being built about a week ago), it's started randomly rebooting while undertaking routine tasks in Windows. There seems to be no logical software-related pattern to the reboots so I have no idea what's causing it. It happens thus: audio skips for a few seconds, I hear a click inside the computer, and then it just restarts.

The parts in the computer are as follows:

Case: Cooler Master Mystique
Power Supply: RAIDMAX RX-630a 630W
Motherboard: ASUS P5NSLI
Processor: Intel Core 2 Duo E6400
Memory: Mushkin 2 GB (2 x 1 GB) DDR2 667 (PC2 5300)
Video: XFX NVIDIA GeForce 7600GT 256 MB
Sound: Onboard for now
Firewire: Koutech PCI to 1394a Card

As I said, there seems to be no software pattern to the reboots... The only recent hardware change is that I've put in the Firewire card (it came in later than the rest of the computer, so I ran a few days without it). I almost want to suspect the Firewire card is causing such a problem -- is that reasonable?

In addition to that, I have an external USB hard drive that's failing... it's connected via the Firewire, and one of the restarts happened when I turned off the drive. Assuming that means it's one of those two, could it be ... Read more

A:New custom computer - random reboots?

Read other 13 answers
RELEVANCY SCORE 52.8

Good evening everyone and Happy Fourth of July!

I am new to the forum but not new to the world of custom building systems

I have built many systems over the years but this particular issue has me reeling a bit.

Here are the specs:

Core i3 3.2 GHz
Intel DP55KG MB
8GB PC3-12800 1600MHz 240-pin DDR3 (4 2GB Kingston Memory Sticks) *Tested and recommended by Intel for this board
NVIDIA GeForce GT 430 video card
Antec EarthWatts 650w PS

Here are some of the issues that I'm having:

1. The boot up takes extremely long. I will power on my system and it will be almost 5-10 seconds sometimes before the POST screen even shows up. Once Windows starts loading, it's fairly quick (for a standard, non SSD HD). I've updated my BIOS and disabled unnecessary features in BIOS to try and speed this process up but no luck.

2. Recently, I changed my RAM to Kingston (was using Corsair) but was getting memory errors on my system every so often. I'd be using it as normal where my system would just shut down and start beeping (3 beeps than a pause, 3 beeps then a pause). According to the Intel manual for my board, that's a RAM error. I contacted Intel and of course they suggested I use RAM that has been proven and "tested" by them. I recently purchased Kingston RAM and installed yesterday.

I, more often than not, have been having random restarts on the system. The screen will go blank and the system will reboot without any warning whatsoever. I've checked... Read more

A:Random Reboots on Custom Build PC

Read other 16 answers
RELEVANCY SCORE 52.8

Hi, first time posting on a forum like this but getting desperate and feel I need to get help from people who actually know stuff about PCs

My custom built PC comprises the following components:
MoBo: ASUS P8P67-M Pro
RAM: 16Gb (4 x4Gb)
Processor: Interl Core i5 - 2500K 3.30GHz
GPU: Nvidia GTS 450

Constructed the entire about ten months ago now and from the off I noticed I had some issues, the main one of these was the system randomly rebooting. This I can not tie to a single event as it has occurred during gaming, doing work, or just idling, therefore regardless of the stress on the computer it will still happen at complete random.
One moment I can be watching the screen and the next moment the screen is blank (all lights inside the case and all fans remain active so clearly power is not completely lost) then it will reboot as if it has just been manually turned on. I have taken this to various PC shops and they can find no reason for this happening other than the possibility of overheating and this shutting down as a protective measure but that is not the case as the CPU remains below 45 even during intense gaming. I am open to ANY suggestions for what to check (I dont know too much I am afraid) and am considering contacting ASUS and intel directly to inquire.

Again, any advice on what to do would be much appreciated!

A:Custom built PC random reboots

What brand/wattage PSU is being used?

Post the temp and voltage readings from the BIOS (look for Hardware Monitor)

Follow the steps outlined below and post the required attachments.

http://www.techsupportforum.com/foru...ta-452654.html

Read other 5 answers
RELEVANCY SCORE 51.6

Hi tech support junkies!

Currently facing a problem of the computer hanging or rebooting after 30 mins-ish of usage. 1st time building

Specs:
Ryzen 5 2400
ZOTAC Mini GTX 1070 8gb
Asrock AB350M Pro4
G.Skill DDR4 2666mhz 8gb RAM
SanDisk 240gb SSD
600w power supply
Unlicensed windows 10 (does it matter?)

I have tried replacing all the available parts however still encounter the same problem.
Attached below is the benchmark test on MSI Kompressor when it hung.
Thank you!
 

A:Custom made Computer hangs or reboots after 30mins of using

Could be overheating. If it is new, then take it back to the shop and ask them to fix it
 

Read other 1 answers
RELEVANCY SCORE 51.2

Hi I built this custom htpc a few months ago and have experienced regular crashes/reboots. The system is based on an MSI Z97-GD65 mobo with i5-4690S processor in a fanless Streacom case designed for the purpose with extensive heatsinking. To ensure temperatures are not excessive I have kept the processor within the Streacom recommendations, nothing is overclocked and it uses only Intel's integrated graphics with no other video card. All components are new. The only "unusual" item has been an Asus Xonar STX sound PCI-e card. The system is used for TV (windows media center), as a Plex server and a Foobar server - not much else.

By way of troubleshooting, after the first few weeks I did a clean reinstall to remove any issues I might have caused as I iterated my way to the optimum setup, but this made no difference. I also replaced the PSU with no effect. I have run memtest on the memory - this produced 2 errors in the new "hammer test", but G-Skill apparently discount this test and when I run memtest86+ which does not include such a test it shows no errors. Temperatures are ok - typically 30-40 degrees C with occasional 50 (and up to 60 only when doing extreme tasks like Memtest) and the crashes do not seem to happen when anything intensive is going on.

I have been blaming the issue on the Asus Xonar STX sound card as google suggests some people find this causes BSOD issues and the Asus drivers are considered buggy and I had been using the alternative UNI... Read more

A:Crash/reboots on custom HTPC: ntoskrnl.exe ntkrnlmp.exe symptoms

Some modules are unloaded there, which resisting the crash dump recording mechanism to record the complete data there.

Code:
fffff880`0330e098 fffff880`058a5b8e <Unloaded_spsys.sys>+0x3cb8e
fffff880`0330e0d8 fffff880`058a41f4 <Unloaded_spsys.sys>+0x3b1f4
fffff880`0330e0f0 fffff880`0586c720 <Unloaded_spsys.sys>+0x3720
fffff880`0330e0f8 fffff880`0587b510 <Unloaded_spsys.sys>+0x12510
fffff880`0330e100 fffff880`0587b510 <Unloaded_spsys.sys>+0x12510
fffff880`0330e108 fffff880`058a4270 <Unloaded_spsys.sys>+0x3b270
So crash dump analysis is also not being helpful.

Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Click on the Start button
Type ?msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the ?Startup? tab.
Deselect all items other than the antivirus.
Apply > OK
Accept then restart.
Then let us see the zip for the next BSOD, that may contain some information. To replicate a BSOD in your situation, put the computer in hibernate/sleep and wake it up.

Read other 8 answers
RELEVANCY SCORE 48.4

The problem:
The PC works for sometime (maybe an hour or maybe few minutes). Suddenly it freezes. Restarting the PC, makes it work for few minutes and it restarts or comes to a blue screen (Error : IRQ_NOT_LESS_OR_EQUAL or PAGE_AREA.... ). Restarting again brings the blue screen again just before the Desktop appears. Restarting few more times makes the PC not even bringing the Display (even Intel logo does not comes prior to bootup).

I do see one indication in this PC. When I switch On the wall socket, the PC performs a POST. The Power, HDD, Keyboard LED lights blink and the fan noise comes for a few seconds and go off. When I power on the PC after this, I observed that the PC works fine.

But when freezing starts happening, the subsequent restarts, even after a complete power down (from wall socket as well), does not makes these LEDs to blink. This is an indication that something is wrong and it freezes for sure when the PC is powered on.

Strange:
I had called up a technician, who services PCs in our area. He took the PC to his workshop and it works well without doing/altering anything to the system. Change could be the input/output devices and the modem (ADSL). As he brings it back to my home, it all starts again to freeze.

Whts been tried:
1) Changed LAN cards and on different slots
2) Changed motherboard
3) Re-formatted/installed windows
4) Updated drivers (VGA, Sound, LAN)
5) Changed RAM
6) Removed UPS
7) Changed SMPS, cables
8) Tried to start without HDD, changed HDD... Read more

Read other answers
RELEVANCY SCORE 42.4

I am a teacher, and have had my students do some assignments on Open Office using machines that run Edubunu. They have then uploaded their assignments and I want to be able to mark them at home but I have windows based Open Office. Will I be able to open their assignments?

A:Can I open documents created on Open Office on a linux based system using a windows based Open Office?

Yup!
PS
Your school must be so cool if it uses Edubuntu!

Read other 1 answers
RELEVANCY SCORE 40.4

So I opened my system monitor just for the heck of it this morning and when I did so I noticed I had the cnql1213.dnl power-pc based THING running on my intel-based mac. I see it is something called a Vundogrb.My question is can I just delete this or is there more that I need to do to successfully rid myself of it. I used to use Windows, in fact I still do sometimes for my laptop, but most of the time I used my Mac and so long since I really worried about this stuff that I'm not sure exactly what to do with it?Can you tell me something about this creepy intruder and how I need to deal with it?Thanks.

A:A PC based spy on an Intel-based Mac 10.11.14 Tiger

Assistance from Apple support given here: http://www.bleepingcomputer.com/forums/ind...t&p=1462502Since Apple is supporting this machine. I am closing this topic, to avoid conflicting information and causing confusion.In the event you still need assistance and Apple still is unable to resolve your issue. Please start a new topic in the Am I Infected Forum: http://www.bleepingcomputer.com/forums/f/103/am-i-infected-what-do-i-do/

Read other 1 answers
RELEVANCY SCORE 39.6

Can someone please help me get rid of these three viruses that I can't seem to get rid off?

I have tried all of the steps that you suggested before posting for help. I have downloaded Adaware, Spybot, Anti-virus program from my internet provider, MCAfee AVERT Stinger, Sygate Personal Firewall (although I am not sure what I should allow on the network or not... _) the Windows updates. And still no luck with the removal of these:

W32/Rootkit-Backdoor-based!Maximus

W32/Trojan.BWZC

W32/NewMalware-LSU-based!Maximus

Please help, they are driving me nuts. The performance of our PC is being affected. Thanks so much.

A:W32/rootkit-backdoor- Based!maximus ; W32/trojan.bwzc; W32/newmalware- Lsu-based!maximus Help!

Hi CharlotteD,I have moved your HJT log to the HijackThis Logs and Malware Removal forum, therefore you shouldn't make any changes to your system.Doing so, could change the results of the posted log, making it difficult to properly clean your system.At this point, the HJT Team should be the only members that you take advice from, until they have verified your log as clean.Your HJT Log is posted Here.I'm closing this topic until you are cleared by the HJT Team. If, after your log has been cleaned, you still need help, please PM a Moderator and we will re-open this topic.If you have any questions, don't hesitate to send me a PM.

Read other 1 answers
RELEVANCY SCORE 39.2

I own a Dell Inspiron 3521 laptop. In the very first month I started getting a blue screen and fatal error UNEXPECTED STORE EXCEPTION. There is no error code.

Dell support replaced the hard disk and then for a few months the error did not occur. Again I'm facing the same issue after warranty has expired.

I upgraded to windows 10.

Now, This is happening too often and I lose the work that is unsaved. Please help.

A:Dell 3521 BSOD UNEXPECTED STORE EXCEPTION Initially Windows 8 now on WINDOWS 10

I don't remember seeing actual BSODs caused by a Store situation.  But since it seems to be happening, can you put the dump file on your OneDrive and give us a link?
We might be able to gain some insight into the situation.
If someone were to suggest you do a Clean install of Win 10, would you consider it?  I assume there are Win 10 drivers for that system?  Is there a Win 10 Recovery image available for download?

Read other 1 answers
RELEVANCY SCORE 39.2

Ok.. I'm just throwing this out here...it's darn late hihi

I have written a 'program' (script), which will automate a recovery system for windows 7, full with a working bootmanager, (custom) partitioning, ramdisks, custom environment (winre/pe), and backup imaging , all legal and licensed according to microsoft as long as its not distributed (aka single computer [home] end user).

I decided after hourrrrssss and weeeks of reading, researching, testing, failing, testing again, reading again, installing F amounts of programs, running sysprep, MDT2010, WAIK, dism, imagex, winpe, winre, bootsect, bcdedit, you name it, I came to the conclusion.. I gotta write something up for the other poor souls around out there.

I'm not going into more details now, but I was thinking of writing this up in c++ or so and asking for donations, which will entitle support in the odd event it would not* work in your case.

However, to just test it all that it works, I wrote it in scripts (batch and vbs) which I realize now I never shall do again :P (more an OOP man myself)

I write programs normally so dealing with exceptions extensively in batch is just .... well about as time consuming as 20 % of the time I spent on R&D on all this.

Anyway, I am wondering, given I always been used to the share way, if there are people who actually are willing to donate 5 bucks or so, on a script which would take about 2 hours max to execute to set up a total personal home recovery partition system. This me... Read more

A:Easy Custom image + custom recovery OEM like system?

OKi.. update. I see now more how this program will work. shame its all working fine with .hta, .vbs and .bat.
ANyway, a full gui app will be present in windows 7 and lets a person set up all his wishes and desires for how he wishes ot have his recovery partitions system set up, incl. the option of other partitions to include in this.

When everything is done, a mikepe disk is created (a custom recovery disk which inclues a wimpe native application of this program ) which will run the precompiled settings from win 7 and will rebuild the partitions, all ready to go. It will also link this system to one single computer only (due to licensing issues and piracy protection.. I'm guessing the latter is easily hacked lol). Anyway, after that, it's all just some hours of installoing, setting up, and voila off to go.

A base windows 7 installation (no extra programs), will create a recovery partition of ~ 3 GB and will be redeploiyed all set to go with your own old account and password in less than 5 minutes.

If you add all your own programs etc, the rebuild can take up to 1 hour.

Still much faster than installing windows, changing all your settings, creating yoru account, installing all those programs... etc.

Will also I think add several boot options, as to recover damaged boot loaders, including support for adding boot entries and back up of linux, vista, xp any OS partitions. You will also be able to give the boot entries any name u fancy like:

my fancy win7 box
my rusty xp bo... Read more

Read other 3 answers
RELEVANCY SCORE 39.2

we are getting internet through proxy server everything works fine but suddenly users, unable to get internet after that we find out ProxySettingsPerUser values changed to zero,even after changing value to one it is becoming zero after system reboots
and we tried to delete the key but it reappears after reboot kindly help 

Read other answers
RELEVANCY SCORE 39.2

we are getting internet through proxy server everything works fine but suddenly users, unable to get internet after that we find out ProxySettingsPerUser values changed to zero,even after changing value to one it is becoming zero after system reboots
and we tried to delete the key but it reappears after reboot kindly help 

Read other answers
RELEVANCY SCORE 38.8

Hi,
I have a successful CA environment working in a Windows 2012 R2-based domain. Recently, some user certificates expired, and when they went to the web page to get a new certificate (https://cert-server/certsrv) using IE 11 on Windows 10 Pro build 1709, they
can go through the pages but the second (https://cert-server/certsrv/certrqus.asp) and third (https://cert-server/certsrv/certrqbi.asp?type=0) pages do not finish loading, no popups asking for permission happen, and when you click 'Submit', you get an error
saying that you can't submit yet because the page hasn't finished loading. (This seems to be a true statement, as evidenced by no list populated if you look at the CSP dropdown box.) This is unique to build 1709. If a user on any lower version of Win 10 Pro
tries the same thing, they succeed in getting their cert.
Has anyone seen this behavior before? It is not a problem with enabling Active Scripting - it is already active. Compatibility mode makes no difference. In our particular environment, web enrollment is the only thing open to us currently. Auto-enrollment
through GPO or other means are not available.
Any help or ideas would be appreciated.

Read other answers
RELEVANCY SCORE 38.8

I'm having an extremely weird vista startup error.
I just built my computer about a month ago and installed Vista Ultimate 64-bit SP-1. It took me about 15 tries, but I finally got vista installed. I updated the drivers for the graphics card and sound card, installed Norton Internet Security 2008 and Supreme Commander: FA, and it started doing this weird restarting stuff.

Once booted up, my computer runs fine. It runs Supcom: FA perfectly at all max settings with no slowdown and has never crashed once. This makes me think it is not a hardware issue.

Here's where the problems start. Every time I turn on my computer, the graphics card cycles the fan high, then low, high, then low eight times before it boots. It didn't do that before. I want to fix that because it takes a long time and the noise is annoying.
Once it boots up, I get the "Windows Error Recovery" screen and if I select "start normally," it starts to boot (green loading bar) then gives me a bluescreen for ~1/4 second (too fast to read or get a pic of) then reboots.
I get the "Windows Error Recovery" screen again and select "use previous settings" and it will sometimes start normally, other times I have to repeat this process. Every time I start normally, it crashes and reboots. Once it's booted, it works fine.

I tried booting off the install DVD and running "Repair My Computer"
First, I said no to using system restore. It said there was a patch... Read more

A:Vista 64-bit Startup Error: Reboots, Crashes, Reboots, Works

Bump.
 

Read other 2 answers
RELEVANCY SCORE 38.8

Hello,

I just built a computer yesterday using a Coolermaster Haf 912 case, Gigabyte 880GM-D2H motherboard, AMD Phenom II quad core 955, Crucial Ballistix 4 Gb, WD 1 Tb Scorpio blue hard drive, Cool max 700 watt PSU, DVD drive and Windows 7.

It keeps rebooting and or blue screening. I can't even have it on long enough to download updates and try to update drivers before it crashes. I checked the bios temps and they are 34c and 41c. DDR3 memory is running at 1.5v. I tried reinstalling 7 and the same issues.

It will stay on in safe mode and I also got a Ultimate Boot CD 2010 from a friend and it stays on when I ran that. I don't know too much about the disc so I ran a memtest and it passed. I ran a quick test on the WD diagnostic and that was ok.

Thanks for help in advance.
Mogoamerica
 

A:Solved: New install randomly reboots or blue screens and reboots.

Read other 6 answers
RELEVANCY SCORE 38.8

this update wont install at all.
i have a clean install of windows factory defaults. with some games installed but thats it.
its giving me a 9c48 error code. ive searched high and low and couldnt find anything to fix this. im wondering if i should just hide it from my updates now help plz

A:windows internet explorer 9 for windows 7 x64-based systems FAILS?

Make sure you're running as Administrator, then ....
Type services.misc in the start search box, click on the icon, scroll down to Windows Module Installer and set it to manual, click apply and start.
Now restart your computer and see if you can get the update.

Read other 7 answers
RELEVANCY SCORE 38.8

Hi
in 2015 I bought an Inspiron 15 7000 series laptop. It originally had windows 8. In June or July of 2016, I took advantage of Microsoft's offer to upgrade it to a Windows 10 via online. I got it to work fined. In October of 2016, I suddenly got a blue screen with the message 'no boot device found'. I used the diagnostics tool but nothing resolved the problem. I can go to the command prompt and I can see an x:\ and I am able to display the contents of the drive. 
I bought a usb-based windows 10 in order to just start from scratch but during installation, I end up with a display saying  no drive detected. 
I now want to do a low-level format, that is, erase everything in the drive, treat it like a 'virgin' drive and then install my usb-based windows 10 software.
When I am in command prompt, I am unable to execute the format command because the system gives me a 'drive is protected' msg.
What tool could you recommend I use to low-level the hard drive so I can install my usb-based windows 10?
Thanks.
vwmdabbler

Read other answers
RELEVANCY SCORE 38.8

Windows SP2 will not install on Windows Vista Home Premium x64 based system; I have tried a stand-alone install and an install through windows update both give me the error code 0x800f0900. Any help in resolving this issue would be greatly appreciated, I cannot play the Diablo 3 game I bought because of this issue!

A:Windows SP2 will not install on Windows Vista Home Premium x64 based

http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_update/error-0x800f0900-while-installing-sp2-for-vista-32/0004e8c1-b3ca-4457-8ad5-112be19bb62c

I'm moving this to Am I Infected where the more knowledgeable can have a look.

Louis

Read other 4 answers
RELEVANCY SCORE 38.8

So I was installing updates with Windows Update when all of a sudden my computer freezes, I had to force shutdown, restarted my computer. Then I noticed the computer froze whenever the update Windows PowerShell 2.0 and WinRm 2.0 for Windows Vista x64-based Systems was installing (KB968930).

So I tried installing it manually from here Download details: Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista for x64-based Systems (KB968930)

Same thing! When the update was installing the progress bar stopped near the end and my computer completely froze!!!

What can I do?? I tried googling everywhere for this problem and I tried everything, it's driving me nuts!!

Thanks

A:Windows PowerShell 2.0 and WinRm 2.0 for Windows Vista x64-based Systems

I'm having the same problem - please help. It is a 64x I don't know if the 32x has the same problem. Very frustrating.

Read other 5 answers
RELEVANCY SCORE 38.8

Windows SP2 will not install on Windows Vista Home Premium x64 based system; I have tried a stand-alone install and an install through windows update both give me the error code 0x800f0900. Any help in resolving this issue would be greatly appreciated, I cannot play the Diablo 3 game I bought because of this issue! I have already gone through the Am I infected? and the malware removal forums on this website and have removed the viruses on my computer I was told to post in the Vista forum for help with this

A:Windows SP2 will not install on Windows Vista Home Premium x64 based

You did not complete the process of neutralizing malware in your topic at http://www.bleepingcomputer.com/forums/topic469409.html/page__st__15 . You were requested to run a malware log and you failed to respond/resply to said request...and your topic was subsequently closed for lack of response.

That topic reflected symptoms that you now complain about.

I suggest that you send a PM to Gringo, asking for that topic to be reopened...and finish that topic...before making assumptions that your system is clean and devoid of problems previously existing.

Louis

Read other 3 answers
RELEVANCY SCORE 38.8

Please Help my windows 7 freeze after i play any game or install a windows update after it i restart my computer. oh yeah i have the error code from the unexpected shutdown here's the codes:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 00000000
BCP2: 867054DC
BCP3: 00000000
BCP4: 00000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\011314-30279-01.dmp
C:\Users\Irwansyah\AppData\Local\Temp\WER-63695-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

can someone help me with this? my computer keep freezing

A:How to fix this Unexpected shutdown in windows 7

Your computer seems to have a BSOD issue. Maybe, posting this in the BSOD help forum will help more. Also download the SF
diagnostic tool from this link

SF Diagnostic Tool - Using for Troubleshooting

You could try these until some BSOD professional catches up.

Malwarebytes Anti-Malware:

Malwarebytes : Thank you for download Malwarebytes Anti-Malware

Please uncheck the option to enable a free trial of malwarebytes anti-malware PRO. Do a full scan with it. It might take some time so please be patient. You may also disable your security software to avoid potential conflicts. Delete anything it finds and restart.

TDSSKiller:

TDSSKiller Download

Please select the option to detect TDLFS file system. And scan with it. Delete anything it finds and restart.

Read other 1 answers
RELEVANCY SCORE 38.8

Hey guys,

I have an issue with my Asus UL30VT. Equipped with the nvidia geforce g210. I am pretty sure it is either a driver or hardware issue related to the video card.

so whenever i play certain videos (on youtube or local from my hard drive) my computer will restart and i get an unexpected error shutdown notification when i boot into windows (after the restart).

this happens very rarely (out of all the video files i played only 1 does this) but will happen every time when playing the same video.

when playing the same youtube videos and local videos using the integrated intel video (my laptop has switchable graphics). It does not shutdown.

there are no official updates for the nvidia driver, i plan on using a moded driver and report back.

attached are the dump files related to the problem.

thanks,
Homamkeh

A:windows unexpected shutdown

Hi,
Please read this article for more detail on the stop code related to your BSODs:
http://www.sevenforums.com/crash-loc...eshooting.html
As the article suggest, if all solution doesn't work, you might want to try different graphic card (Perhaps borrow from friend or borrow at store that let you return later)

First thing to try is always reinstall the driver. When upgrading your graphic driver you MUST remove all traces of the current driver. In order to do that we recommend using Guru3D - Driver Sweeper

When it is removed then download and install the fresh copy.


Code:

Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\TUANTR~1\AppData\Local\Temp\Rar$DI00.086\081410-18985-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*e:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Machine Name:
Kernel base = 0xfffff800`03251000 PsLoadedModuleList = 0xfffff800`0348ee50
Debug session time: Sat Aug 14 11:27:58.980 2010 (UTC + 7:00)
System Uptime: 0 days 0:08:03.337
Loading Kernel Symbols
...............................................................
................................................................
..................................... Read more

Read other 2 answers
RELEVANCY SCORE 38.8

Ok when I start windows normally and open up google chrome I get a BSOD. Then in safe mode I try to post a topic in bleepingcomputer.com forum and midway I get BSOD again. I think it is caused by a rootkit or something.When I go to task manager (normal mode) most of the processes are hidden and there are some processes with no user name and/or description.Image name ccsvchost.exeUser NameDescription Symantec... (forgot rest)Image name csrss.exeUser NameDescriptionImage name winlogon.exeUser NameDescriptionLast time I got some malware on my computer and removed it I think it left behind a rootkit.Malwarebytes' Anti-Malware Quarantine: (Haha malware)Backdoor.BotGeneric.Bot.HBackdoor.BotGeneric.Bot.HBackdoor.TraceBackdoor.BotBackdoor.BotTrojan.AgentTrojan.AgentNow time for the BSOD info:Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 1033Additional information about the problem: BCCode: f4 BCP1: 00000003 BCP2: 84F99780 BCP3: 84F998EC BCP4: 822337B0 OS Version: 6_1_7600 Service Pack: 0_0 Product: 256_1Files that help describe the problem: C:\Windows\Minidump\030410-21375-01.dmp C:\Users\Administrator\AppData\Local\temp\WER-46953-0.sysdata.xmlAlso my sound is screwed up there is no sound. Edit: Removed unnecessary poll from this topic. ~ Animal

A:Windows 7 unexpected shutdowns

Hello there are a few issues here ... First >> is I am mving this to the Am I Infected forum from W7.Second >> about the Bots and backdoors found.One or more of the identified infections is a backdoor trojan.This allows hackers to remotely control your computer, steal critical system information and download and execute files.I would counsel you to disconnect this PC from the Internet immediately. If you do any banking or other financial transactions on the PC or if it should contain any other sensitive information, please get to a known clean computer and change all passwords where applicable, and it would be wise to contact those same financial institutions to apprise them of your situation.Though the trojan has been identified and can be killed, because of it's backdoor functionality, your PC is very likely compromised and there is no way to be sure your computer can ever again be trusted. Many experts in the security community believe that once infected with this type of trojan, the best course of action would be a reformat and reinstall of the OS. Please read these for more information:How Do I Handle Possible Identify Theft, Internet Fraud and CC Fraud?When Should I Format, How Should I ReinstallWe can still clean this machine but I can't guarantee that it will be 100% secure afterwards. Let me know what you decide to do.Third>> your signture needs to be adjusted. Please read the BleepingComputer.com Message Board Rules. and fix it ,else it wil... Read more

Read other 7 answers
RELEVANCY SCORE 38.8

Im getting below error after the restart.and attached log based on followed by below url.

Blue Screen of Death (BSOD) Posting Instructions

Help me.


Thanks in advance.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 116
BCP1: FFFFFA80045C84E0
BCP2: FFFFF8800404ACB0
BCP3: 0000000000000000
BCP4: 0000000000000002
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\051814-18673-01.dmp
C:\Users\Prabhu\AppData\Local\Temp\WER-50731-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

A:Windows has unexpected shutdown

Update your Intel graphics driver as it's out of date.
Download the latest version here:

https://downloadcenter.intel.com/Default.aspx


Code:
BugCheck 116, {fffffa80045d44e0, fffff88004032cb0, 0, 2}

Unable to load image \SystemRoot\system32\DRIVERS\igdkmd64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for igdkmd64.sys
*** ERROR: Module load completed but symbols could not be loaded for igdkmd64.sys
Probably caused by : igdkmd64.sys ( igdkmd64+23cb0 )

Code:
fffff880`0400f000 fffff880`045e2500 igdkmd64 T (no symbols)
Loaded symbol image file: igdkmd64.sys
Image path: \SystemRoot\system32\DRIVERS\igdkmd64.sys
Image name: igdkmd64.sys
Timestamp: Wed May 06 19:22:19 2009 (4A01D55B)
CheckSum: 005D8353
ImageSize: 005D3500
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

Read other 2 answers