Over 1 million tech questions and answers.

Problems with Hyper V Configuration (for virtual machine, Windows Phone). Error: 0x80071A90

Q: Problems with Hyper V Configuration (for virtual machine, Windows Phone). Error: 0x80071A90

Hi dear comunity.
I go to work with Visual Studio 2013 for the creation Windows Phone apps. When I installed the Visual Studio, the setup told me that I need install or configure to
Hyper-V. I followed all the steps for that. Control Panel -> Programs ->Turn Windows features on or off -> Check all Hyper V components -> and OK. And then this error appear: Error: 0x80071A90.
Somebody can help me with this problem. I want to work very soon with Windows Phone Apps for my institute.
Thanks for all :)

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Problems with Hyper V Configuration (for virtual machine, Windows Phone). Error: 0x80071A90

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 207.2

Hi dear comunity.

I go to work with Visual Studio 2013 for the creation Windows Phone apps. When I installed the Visual Studio, the setup told me that I need install or configure to Hyper-V. I followed all the steps for that. Control Panel -> Programs ->Turn Windows features
on or off -> Check all Hyper V components -> and OK. And then this error appear: Error: 0x80071A90.

Somebody can help me with this problem. I want to work very soon with Windows Phone Apps for my institute.

Thanks  for all :)

A:Error: 0x80071A90. Problems with Hyper V Configuration (for virtual machine, Windows Phone).

are you using an anti virus software? try to disable it if so.Microsoft Certified Solutions Developer - Windows Store Apps Using C#

Read other 3 answers
RELEVANCY SCORE 101.2

I have Hyper-v running on Dell Precision T3600 with Windows 8 OS.  I am trying to start a VM (called Windows8VM) to install Windows 8 in the hyper-v virtual machine, but I keep getting the following message:
"Windows8VM" failed to start.
Failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
"Windows8VM" failed to start.  (Virtual machine ID D670D3BB-9AE2-0453D-9191-EA6EFC242A9C)
The Virtual Machine Management Services failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
I have turned the hyper-v feature on in the "Turn Windows feature on or off.  The BIOS has virtualization enable.  Help!!! driving me nuts for a week now.
Nick :(

A:Windows 8 Hyper-V - Virtual Machine Management Service failed to start the virtual machine

Finally got it to work.  Our admin lock down the devices that could be installed on the computer.  It turned out that one of the vm devices was not allowed to be installed.  Thank community.
nick

Read other 11 answers
RELEVANCY SCORE 92

I'm using an AlienWare M14 machine. I tried to create a virtual machine locally using Client Hyper-V on Windows 8 Pro, but it still doesn't work (took me a lot of time). I added the Hyper-V features in "Turn windows feature on or off", and all of the requirements to run Hyper-V are fulfilled (SLAT, BIOS, 64 bits, ...) (I attach the msinfo32 output in this post). At the last step in creating a virtual machine, it says "... General access denied error... (0x80070005)" (for details, check my attached image). I googled, tried some solutions but still no luck so far.

Thanks for any help.

A:Error creating virtual machine (Client Hyper-V, Win 8 Pro)

Actually, the error is general access denied. I have already uploaded a new image. Any help would be appreciated. Thank you.

Read other 19 answers
RELEVANCY SCORE 88

I have come across a Hypervisor issue on Windows 8 which seems not to be described yet.

Suddenly the Windows 8 Hyper-V Virtual Machine Management service is not starting automatically anymore after an computer restart. 
Also manually starting the Hyper-V manager service from the Hyper-V Manger Console ends up in the following error:
The Hyper-V Virtual Machine Management service terminated with the following error: 
Not enough storage is available to complete this operation.

This belongs to the following Windows 8 System event error:
Log Name:      System
Source:        Service Control Manager
Event ID:      7023
Task Category: None
Level:         Error
Keywords:      Classic
Description:
The Hyper-V Virtual Machine Management service terminated with the following error: 
Not enough storage is available to complete this operation.


Reinstalling the Hyper-V feature is not solving this issue.
Although the event description relates this issue due to local storage issues in my case it was not related to any storage shortage at all but due to file corruption on the system drive.

System configuration:
Windows 8 Enterprise with Hyper-V Virtual Machine Management service version (VMMS.EXE ) 6.2.9200.16384. 

Root cause:
After analyzing the system log I did found al record wich is pointing to file corruption in the Hyper-V Snapshot cache:
Log Name: &n... Read more

A:The Hyper-V Virtual Machine Management service terminated with the following error: Not enough storage is available to complete this operation.

Hi,

Thanks for sharing. We really appreciate your time and efforts. Hope your experience will help other community members facing similar problems.Leo Huang
TechNet Community Support

Read other 3 answers
RELEVANCY SCORE 86.8

Hi,

Below, see XP virtual machine configuration Error Msg. indicating: "User does not have sufficient access rights".


Yet the next image: "Never notify me when", indicated I am at the lowest UAC level. Or are the lower levels represented by Easter Eggs?


Also, note the Windows XP mode is installed, but because of the XP virtual machine configuration msg above, I can't go further.


I have Googled this situation to no avail. Found a few vague postings but they have lead to dead ends.

Any help, suggestions will be much appreciated.

cheers,

klxdrt

Read other answers
RELEVANCY SCORE 81.6

This started happening few days ago probably after a windows update. I tried uninstalling HyperV component restart, readd restart etc no luck. My existing hyperv virtual machines fail with the same error, to create a new one also fails.
Please advise, Thank you.
The server encountered an error while creating New Virtual Machine.
Failed to create a new virtual machine
New Virtual Machine failed to realize
Failed to access configuration store 0x80070003




Gokhan Varol

Read other answers
RELEVANCY SCORE 81.2

Hey guys

Was just wondering. If I have a Licensed Server 2012 R2 running 3 Hyper-V machines, can I use 3 NEW, never activated OEM Licenses for Windows 7 Professional to activate on the virtual machines?

Under the FAQ OEM licensing it says that it can be used for 1 install of either Physical or Virtual.
http://www.microsoft.com/OEM/en/Pages/support-faq.aspx#fbid=0mG9cN9s-3N


Q.Can I install OEM software on a virtual machine (VMware)?


A. You can install OEM software in a virtual environment as long as you have a separate license for each instance of the software. It is fine to use the OEM version as long as it is properly licensed. To be clear, a separate version of the
software must be installed for both the ?standard? and ?virtual? installations.


Please advise.

Read other answers
RELEVANCY SCORE 80

Greetings.

I set up Hyper-V in my Win 10 Anniversary install and created a Win 10 Virtual Machine which is fully activated.

I tried setting up a picture password for this VM. The Picture Password option was not available but I got it to show using gpedit. I then set a Picture Password but when I reboot, the Picture Password does not show up.

Is it possible to use a Picture Password in a Hyper-V VM?

Read other answers
RELEVANCY SCORE 79.2

Hi,
I newly installed Windows 8.1 (not an upgrade, fresh install from corporate network) on a Dell Precision T7600 workstation and enabled the Hyper-V feature with the matching management. I created a couple of 2 GB RAM, 2 virtual CPUs VMs and am trying to install
Windows Server 2k8R2 and 2k12 on them. After a network boot, during the first couple dialog boxes for Windows setup, I am unable to use the keyboard. When I try to boot from an ISO, the VM get stuck on a black screen "Starting Windows". In either
case if I use the VM connection window menu to paste from clipboard or send ctrl+alt+del, I get the error:
Virtual Machine Connection
Could not send keys to the virtual machine.
Interacting with the virtual machine's keyboard device failed.

I search online for this error and did not find others experiencing it.
I tried to shutdown and reset both VMs, I stopped and restarted the Hyper-V service. Neither helped. I am not sure what other step I can take at this point.
Also, I configured a virtual switch as external network on one of the two Intel network adapters. Both connect to a gigabit switch. "Allow management operating system to share this network adapter" is checked. Both VMs are on the same virtual switch.

Senior Soft. Dev. Eng. | Microsoft IT | Microsoft Corporation

A:Hyper-V on Windows 8.1 64 bit, "Could not send keys to the virtual machine"

My bad! I selected Gen2 VM because I wanted resizable vhd, but that is not supported with older windows versions, leading to these confusing errors.Senior Soft. Dev. Eng. | Microsoft IT | Microsoft Corporation

Read other 6 answers
RELEVANCY SCORE 79.2

My Windows 10 Hyper V Virtual Machine has the screen resolution stuck at 1024 X 768. I tried installing the NVidia video driver from the lenovo Web site within the guest operating system but still I am not able to change the screen resolution. Any ideas on how I can fix this issue so that I can run the virtual machine at a better screen resolution? When I try to change display adapter properties all I see is a greyed out 1024 X 768 display resolution:  When I List All Modes from within the virtual machine I only see 1024 X 768. 

A:P70 Hyper V Virtual Machine Resolution stuck at 1024 X 768

I figured it out. The solution was to remove the 3D Graphics adapater I had added to the VM configuration. Now I'm trying to figure out how to get sound to turn on in the VM.

Read other 1 answers
RELEVANCY SCORE 76.8

Hello,

I recently did an in place upgrade to Windows 10 Pro and tried to create a free virtual machine using the provided MS development environment/build: Get a Windows 10 development environment - Windows app development
I created a internal and external virtual network adapter/switch, and after all is done attempted to either use the "Enhanced Session" or Remote Desktop Connection to enter my virtual machine. This machine seems to otherwise work fine (especially in Basic Session or when the network is set to Private instead of External or Internal), but if the audio is available and any sound attempt to trigger (in VM, to be played by host machine), it will crash.

The message just states that the connection has been lost. The Event Log on the host machine (my Win10 Pro) simply shows that the 'vmconnnect.exe' crashed with event 1000, and that there is a .Net Runtime error event 1026.
My repeated attempts to solve the issue involving looking into anything wrong with the connection setting or firewall setting revealed nothing. Internet searches also did not reveal any answers, though the closes person to have my issue also has no answer post (Windows 10 Hyper-V keep crashing - Super User).
I tried other OS for the VM as well, but all had the same issue (Win7, and Win8)

Short of the in place upgrade causing this issue, I was wondering if anyone here may be able to help me resolve this problem with the audio crashing the Virtual Machine.
Are there any additional s... Read more

Read other answers
RELEVANCY SCORE 71.2

I'm trying to run Client Hyper-V on my Windows 8 Pro machine. I was able to successfully install the service, and can create virtual machines and hard disks on my local system. I can even start them, and see boot activity via the preview window in the MMC.
I cannot, however, connect to any machines from the local system: when I do, it hangs on "Connecting to <machinename>" for 30 seconds before it pops up with the dialog:
"Cannot connect to virtual machine. Try to connect again. If the problem persists, contact your system administrator."
Obviously, because this is Client Hyper-V, I am the system administrator, so I scour the Internet to solve my problem. I see solutions related to firewalls, administrative permissions, a few other things, and nothing has worked. I also tried creating
a virtual machine on a Windows 8 Enterprise system (which can connect to it just fine) and export it for the Pro machine to import, and I still cannot connect to it, whether the VM is registered in place or copied to the host.
Some other notes:
- None of these systems has an OS installed - two locally created ones either had no boot or booted off a Linux LiveCD, and the exported one attempted to do a PXE boot. Thus, I cannot attempt to link via Remote Desktop since the computers have no names
- Hyper-V has some other quirks on my system as well: in order to stop a virtual machine, I have to end the vmwp process - which restarts the machine - and then stop it fr... Read more

Read other answers
RELEVANCY SCORE 71.2

Hi,

I have a pretty severe issue on the computers at my work. They all are reporting error code 0x80071a90 in event log when I try to update them. I've used MS's ifixit tool online, sfs/scannow, and CHKDSK as well as safemode. It still isn't working! I really need some help with them, They're Lenovo M72 and M72z.

Code:
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 19.0
2013-07-15 10:54

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs
(f) CBS MUM Corrupt 0x80070026 servicing\Packages\Microsoft-Windows-Client-Features-Package~31bf3856ad364e35~amd64~en-US~6.1.7601.17514.mum Line 1: X?
(fix) CBS MUM Corrupt CBS File Replaced Microsoft-Windows-Client-Features-Package~31bf3856ad364e35~amd64~en-US~6.1.7601.17514.mum from Cabinet: C:\Windows\CheckSur\v1.0\windows6.1-7601-x64-clientcab4.cab.
(fix) CBS Paired File CBS File also Replaced Microsoft-Windows-Client-Features-Package~31bf3856ad364e35~amd64~en-US~6.1.7601.17514.cat from Cabinet: C:\Windows\CheckSur\v1.0\windows6.1-7601-x64-clientcab4.cab.
(f) CBS MUM Corrupt 0x80070026 servicing\Packages\Microsoft-Windows-Client-Wired-Network-Drivers-Package~31bf3856ad364e35~amd64~en-US~6.1.7601.17514.mum Line 1: X?
(fix) CBS MUM Corrupt CBS File Replaced Microsoft-Windows-Client-Wired-Network-Drivers-Package~31bf3856ad364e35~amd64~en-US~6.1.7601.17514.mum from Cabinet: C:\Windows\CheckSur\v1.0\windows6.1-7... Read more

A:Windows Update Error 0x80071a90... on ALL the computers.

Code:
Unavailable repair files:
winsxs\manifests\x86_policy.9.0.microsoft.vc90.mfcloc_1fc8b3b9a1e18e3b_9.0.30729.6161_none_f0bf52b884e4a7f2.manifest
winsxs\manifests\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.0.7601.22290_none_6cbad485070352f6.manifest
winsxs\manifests\x86_microsoft.vc90.mfcloc_1fc8b3b9a1e18e3b_9.0.30729.6161_none_49768ef57548175e.manifest
are the only problems remaining - the others are 'normal' for a machine with IE 10 installed/

I'll post a fix protocol for them later.

Read other 9 answers
RELEVANCY SCORE 70.4

Hello

I am struggling to make my windows update run properly.
There are 3 important updates that I cant make it work, they are:
1- 2 of them concerning .NET framework 4 (KB2742595 and KB2789642)
2- Service Pack 1 (KB976932)

For the .NET framework 4 updates: windows actually do update them and says they are sucessfully updated, but when I check for updates again, they are still there. The SP1 is a little different, it does install normally, but when PC logs off to continue installation, it never goes through 14%. Then it restarts, says failure and it rolls back, aborting the update, so when I check windows updates again, if shows SP1 failure, error 0x80071a90.
I've tried many different things, like manual update, safe mode or clean startup config, none work.
Also, I downloaded SURT and installed it, but it seems nothing really happened.
Following Windows Update Posting Instructions
1- installed SURT, but seems nothing happened
2- SFC scan is normal; error-checking tool is also ok.
3- No errors appear on that screen. I will only find the error code for SP1 if I click on "View update history"
4- CBS.zip attached

Any help will be greatly appreciated.

EDIT = couldn't attach zip file because it's size is 20mb.

A:Windows Update - won't install SP1 and other updates- error 0x80071a90

I just found out that when I open 'msconfig' , there are many services stopped, including many microsoft ones. If I try to enable then and restart my PC, simply nothing happens, they keep stopped.

I tryed to manually start them through 'services.msc', some of them start to work, like 'Vaio Event Service' which enables my Fn key, but when I restart, every alteration made is undone ( I quickly notice this when I try to use Fn key in attempt to raise/lower the volume, after I restart).

I thought of virus/malware could possibly doing so, so I ran MSE,adwcleaner, spybot but the errors remain. Any suggestions please?

Read other 9 answers
RELEVANCY SCORE 69.2

Hi this is my first post but I am really confused as to an issue with hyper-V

Whenever I go to open the virtual switch manager, it says; The operation on computer 'DESKTOP-V1A0142' failed: Generic error. Is there anyway to fix this. I have not yet created any switches because it won't let me.

A:Hyper-V error when creating virtual switch.

Hi Nukeproof, welcome to the Ten Forums.

First thing to check is that the Hyper-V Extensible Virtual Switch is enabled in your NIC's Properties:
If it is totally missing click the Install button and install, it, you'll find it under Protocol:
Install if needed, enable it and reboot and try Virtual Switch Manager again.

Kari

Read other 1 answers
RELEVANCY SCORE 69.2

I've installed Hyper-V on a Windows 8 Enterprise PC and can't seem to assign any virtual disks created on my second disk (D: drive) to a virtual machine.
I have created the virtual machine (XML stored on C: drive) in the Hyper-V Manager console without a disk assigned to it. I then successfully created a virtual disk in the Hyper-V Manager console. However, when I try and assign the disk to the virtual machine,
it gives me the following error when I press OK:
Error applying Hard Drive changes
Failed to add device 'Virtual Hard Disk'
Hyper-V Virtual Machine Management service Account does not have permission to open attachment. Error: 'General access denied error' (0x80070005)
I have checked the permissions on the virtual disk and the virtual machine ID account has been assigned Read/Write permissions (I have tried adding full control permissions but this does not resolve the error). The D: drive has been formatted in Windows
8 and if I create a virtual disk on the C: drive then it works fine. As far as I can tell, I can't see any obvious differences between the C: and D: drives in terms of configuration or permissions. I have BitLocker installed on both of them.
Hyper-V has been installed with the default settings - no configuration or service account changes.
Any help would be greatly appreciated - Thanks.Phil Childs http://get-spscripts.com

A:"Failed to add device Virtual Hard Disk" error on removable storage in Windows 8 Hyper-V

Issue Resolved!
Dell has posted an updated intel storage driver that resolved this issue. 

The driver is available for download here: 
http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/latitude-e6430-atg?driverId=2PWDK&fileId=2998372451

Read other 89 answers
RELEVANCY SCORE 68.8

Last night when shutting down the virtual machine within Win7, the virtual machine hanged. Win7 gave me the option of doing a forced shutdown, which I accepted. But now this morning when I try to re-open the virtual machine (which is powered down) I keep
getting the error message "The virtual machine could not be started. An unknown error occurred."  PLEASE HELP: I have months of research stored in the virtual machine which I need to retrieve. Any suggestions gratefully received.

A:URGENT: My XP-Mode Virtual Machine has crashed: it is powered down and refuses to power up. PLEASE HELP: I have months of research stored in the virtual machine which I need to retrieve.

Hi,

 

The issue could be incorrect configuration of XP mode.

 

Trying to rename the . vmc and .vsv from C:\Users\Username\AppData\Local\Microsoft\Windows Virtual PC\Virtual Machines
and run Virtual Machine again.

 

Best Regards,

Niki
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Read other 5 answers
RELEVANCY SCORE 68.4

hyper-v - error in creating external virtual switch
I got an error in creating external virtual switch at hyper-v on windows 8 pro x64.

I have one xp vm and tried to make an network connection, but I coul not success.

Please let me know how to make creating external virtual switch at hyper-v.

Thanks in advance.

A:hyper-v - error in creating external virtual switch

Check this tutorial from our own Dwarf: Hyper-V - How to Use in Windows 8.

The tutorial explains to you how to create a virtual switch and your Hyper-V virtual machine.

Kari

Read other 11 answers
RELEVANCY SCORE 68.4

I have a Mac running Windows 8.1 via Parallels.
What I am trying to do is set up a test 2012 SBS my PC and while trying to connect to my local machine on Hyper-V I get this http://i.imgur.com/AIWU7lc.png I've tried running as admin, I've also tried starting services however I get this http://i.imgur.com/jUt8P6w.png
A bit stuck on what to do?
Thanks

A:Hyper-V Local Machine Error

Originally Posted by Crusader


I have a Mac running Windows 8.1 via Parallels.
What I am trying to do is set up a test 2012 SBS my PC and while trying to connect to my local machine on Hyper-V I get this http://i.imgur.com/AIWU7lc.png I've tried running as admin, I've also tried starting services however I get this http://i.imgur.com/jUt8P6w.png
A bit stuck on what to do?
Thanks



Did it ever worked that way?

Why running a VM in a VM? I believe it's a test.
You'll lose considerable performance that way and there's more chance for the machine to crash.

Running Hyper-V in a Windows host is the only way to get best results.

Try upgrading or running from Parallells build 9.0.24217 or otherwise run Hyper-V from bootcamp install.

Read other 2 answers
RELEVANCY SCORE 66.4

Hi All,

Getting a strange error with Hyper-V on Windows 8 Pro x64.

When I try and add a virtual switch I get:

Error Applying Virtual Switch Properties Changes
Failed while adding virtual Ethernet switch connections.
Ethernet port '{a bunch of stuff}' bind failed: The data is invalid.
(0x8007000D).

There doesn't seem to be much on google that relates to this (in particular the bind failed: the data is invalid part).

Anyone have a clue what the cause might be?

Cheers

A:Hyper-V Error Adding Virtual Switch - Ethernet Port Bind Failed

can be many thing, in 3 or 4 years that I'm using Hyper-V I never encounter it, you need some networking knowledge to play with virtual switch, but usually 0x8007000D error are due to files corruption or permissions, try to run hyper-v management as admin.

Read other 7 answers
RELEVANCY SCORE 64.8

How do I transfer a 6KB text file, created in Vitrual XP under Hyper-V in Windows 10, out of Hyper-V into Windows 10 proper?
* No internet appears available.
* No USB device appears.


Read other answers
RELEVANCY SCORE 63.2

whenever i go to a webpage that requires java virtual machine, it always tells me i need to install it again in order to show the page correctly. I have instaled it multiple times and i still cant view some pages.....Please help!
 

A:Problems with Java Virtual Machine

Some times it fails to link properly to the browser. Try uninstalling it, then install an older version of Java VM and then upgrade it. This sometimes shakes it loose.
 

Read other 1 answers
RELEVANCY SCORE 62.8

Unable to start the application-the Java Virtual Machine cannot be loaded.
Class not registered

Well thats the error I get. I was trying to use my HP all in one to scan (Which I don't do but once in a blue moon) and I can't get it to work. It was working but I downloaded Java from Sun Micro , and now I get this message. I tried to uninstall the Java to see if that would work but it didn't any thoughts?? I mean I could totally wipe my system and start over which I do occasionally just for giggles and grins but I would like to see if I can fix this.

BTW I'm using XP SP2 with most every update except IE 7

All help is greatly appreciated.

I will let you know I did google the error message and got something about the whole Microsoft issue with Java Lawsuit blah blah blah. Also I found some threads of what other people have done to try and fix this issue, but I don't have any chickens handy and I can't wait until the moon is in the seventh hour of the seventh day of the seventh... you get what I'm saying.

Once again all help is greatly appreciated.
 

Read other answers
RELEVANCY SCORE 62.8

I was using Photoshot CS4 and my computer shut itself off. When I laungh photoshop I get a Adobe Photoshop CS4 has stopped working. A problem caused the program to stop working correctly.

Though I should go back to a restore point. Tried several and get a System Restore error 0x80071a90. Any suggestions?

A:System restore error 0x80071a90

and did you use google to research the problem?

Read other 1 answers
RELEVANCY SCORE 62

Hello everyone,

I am having a problem with XP. I clean installed and everything went fine. When I go to a site to play an online game, my system comes up with an error and/or reboots. The error says I don't have enough Ram and something about an error with JAVA. I have 512 ram right now. I took that out and put in my 256 chip to see if maybe the ram is bad and it looks as if both are fine. So I tried again and as it loads the game, poof, it auto reboots.

I never had this problem with ME.

Any help would be appreciated.
 

Read other answers
RELEVANCY SCORE 62

Hi,
Windows XP Home
IE6/Firefox 1.0.2
SP2
DSL Connection
JRE 1.5.0

"An unexpected error has been detected by HotSpot Virtual Machine:"

Hopefully someone can interpret this...HotSpot Virtual Machine error log...for me.

When changing games at Pogo.com, I've been getting occasional crashes from my Firefox 1.0.2.

It happened again tonight but, this time there was a file left on my desktop.
I used Notepad to open it and save it.
The contents of that log are in the link above.

I'm hoping that someone knowledgeable can interpret the log, identify what is
causing the error and possibly suggest a fix for whatever causes these
crashes.

This is the first and only time such a log has been left after a crash.

Thank you,

Telstar
 

A:HotSpot Virtual Machine Error log help

Read other 12 answers
RELEVANCY SCORE 62

#THIS KEEPS POPPING UP ON MY DESKTOP AS A NOTEPAD WHEN THE WINDOW CLOSES ON IT'S OWN....THIS IS ONLY 1 OF MANY.
# An unexpected error has been detected by HotSpot Virtual Machine:
#
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x3a707474, pid=2152, tid=1696
#
# Java VM: Java HotSpot™ Client VM (1.5.0_04-b05 mixed mode)
# Problematic frame:
# C 0x3a707474
#

--------------- T H R E A D ---------------

Current thread (0x0b981008): JavaThread "SocketConnection" [_thread_in_native, id=1696]

siginfo: ExceptionCode=0xc0000005, reading address 0x3a707474

Registers:
EAX=0x02c67858, EBX=0x00001c98, ECX=0x02c895d0, EDX=0x7c90eb94
ESP=0x0c91f080, EBP=0x0c91f0e0, ESI=0x02c68938, EDI=0x00000000
EIP=0x3a707474, EFLAGS=0x00010202

Top of Stack: (sp=0x0c91f080)
0x0c91f080: 02b16236 0c91f0dc 02b1ac2c 00000800
0x0c91f090: 05411f70 0c91f0e0 00000000 71ab61c9
0x0c91f0a0: 00001c98 0c91f0d0 00000001 0c91f0e8
0x0c91f0b0: 0c91f0f4 00000000 00000000 07296ef8
0x0c91f0c0: 02c63710 00000800 0b9810c4 00000001
0x0c91f0d0: 00000001 0c91f104 07296ef8 00000000
0x0c91f0e0: 0c91f908 6d4c69d5 00001c98 0c91f104
0x0c91f0f0: 00000001 00000000 1005bd08 10b85148

Instructions: (pc=0x3a707474)
0x3a707464:
[error occurred during error reporting, step 100, id 0xc0000005]

Stack: [0x0c820000,0x0c920000), sp=0x0c91f080, free space=1020k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C 0x3a707474
C 0x6d4c69d5
J java.net.SocketInputStre... Read more

A:HotSpot Virtual Machine error

Hotspot Virtual Machine is Sun Microsystems Java. The first thing to do would be check for viruses and other malware.Do you have an up to date antivirus program running on your computer? If you do, make sure the av program has had the latest updates, shut down the computer, then boot into safe mode and run a virus scan.If that doesn't turn up anything run a variety of available anti-malware programs.Freeware AntiSpyware and Security ProgramsSoftware firewalls with freeware versionsZone Alarm SE: http://www.zonealarm.com/Sygate: http://www.sygate.com/Antivirus programs - freeware (you can only use one resident anti-virus program on your computer. More than one will conflict)AVG: http://www.grisoft.com/us/us_index.phpAvast Anti-virus freewarehttp://www.komando.com/bestshareware.aspAnti-malware freeware (You can run as many of these as you wish. Generally there is no conflict between these and you should always run several)AdAware: http://www.lavasoftusa.com/software/adaware/Microsoft Antispyware Beta: http://www.microsoft.com/athome/security/s...re/default.mspxSpywareBlaster: http://www.javacoolsoftware.com/spywareblaster.htmlSpybot S&D: http://www.safer-networking.org/en/index.htmlMicrosoft Malicious Software Removal Tool (Win XP and Win 2000):http://www.microsoft.com/security/malwareremove/default.mspxA? - Free from http://www.majorgeeks.com/download4281.html . Run it, click Search for Updates, then click Scan.CWShredder from InterMuteCW Shredder removes some variants... Read more

Read other 1 answers
RELEVANCY SCORE 62

TeamI have a Lenovo T560 laptop, machine type model: 20FH004DFR.Config is Intel Core i7-6500U with 16GB RAM and a 500GB SSD drive.Operating system is latest Windows 10 Enterprise version 1709, build 16299.192.Intel Virtualisation has been enabled in the BIOS and Hyper-V selected in Windows Features.Hyper-V manager starts perfectly and all appears OK.I tried to create a Windows 7 Ultimate Generation 1 VM with 4GB mem, default switch, 20GB hard disk, set DVD to point to ISO media.I opened VM Connect and clicked on the Start button.The VM started and booted in to ISO to start installation.This is where it all goes wrong.VM Connect tries to connect to the VM and constantly fails. Eventually erroring with Virtual Machine Connection error "Cannot connect to the virtual machine. Try to connect again. If the problem persists, contact your system adminsistrator. Would you like to reconnect". In the background is another error saying "Video remoting was disconnected. The virtual machine is currently using the RemoteFX 3D video adapter. A user is currently connected via Remote Desktop. Connect to the virtual machine by using Remote Desktop Connectoion."The small screen view in Myher-V Manager clearly shows the VM running and the installation screen in Windows 7 awaiting for keyboard and language selection. But VM Connect never connects to the VM.Any ideas?I thought I was running the latest version of all tools and utilities.This does appear to be a Lenovo specific issue as I have create... Read more

Read other answers
RELEVANCY SCORE 61.6

the problem is i get this thing about MICROSOFT VIRTUAL MACHINE RUNTIME. on my CSTRIKE.EXE "abnormal termination"

and after i click ok..i get another error saying

"Instruction at XXXXXXXXX referenced Memory at 0X00000XX. The memory could not be read.

The program then terminates. "

i only get this when i play COUNTERSTRIKE..but with my other games its perfectly fine

Application exception occurred:
App: C:\Sierra\Counter-Strike\cstrike.exe (pid=1588)
When: 2/16/2003 @ 16:48:34.564
Exception number: c0000005 (access violation)

*----> System Information <----*
Computer Name: JUSSAREN
User Name: Aren
Terminal Session Id: 0
Number of Processors: 1
Processor Type: x86 Family 6 Model 3 Stepping 1
Windows Version: 5.1
Current Build: 2600
Service Pack: 1
Current Type: Uniprocessor Free
Registered Organization: JussAren
Registered Owner: Aren

*----> Task List <----*
0 System Process
4 System
460 smss.exe
520 csrss.exe
552 winlogon.exe
596 services.exe
608 lsass.exe
776 svchost.exe
828 svchost.exe
940 svchost.exe
1004 svchost.exe
1224 Explorer.EXE
1252 spoolsv.exe
1416 evntsvc.exe
1660 crypserv.exe
1676 dcfssvc.exe
1728 nvsvc32.exe
1864 svchost.exe
1588 cstrike.exe
228 drwtsn32.exe

*----> Module List <----*
(0000000000320000 - 00000000003c1000: C:\Sierra\Counter-Strike\WONCrypt.dll
(0000000000400000 - 0000000004028000: C:\Sierra\Counter-Strike\cstrike.exe
(0000000004030000 - 000000000439a000: C:\Sierra\Counter-Strike\vgui.dll
(000000000581... Read more

A:Geforce4mx420/Runtime Virtual machine ERROR..help!

Read other 11 answers
RELEVANCY SCORE 61.6

Ok, I purchased a game called Minecraft for my daughter this morning and have so far been unable to use it.

When we tried to download and run it, an error message appears that says:

'Error: Could not create the Java Virtual Machine.'
'Error: A fatal exception has occurred. Program will exit.'

I really do not have a clue what this means, I would really appreciate any help or advice. I'm not technically minded at all so please go easy on the jargon!!

Thanks all
 

A:Error message: Java Virtual Machine

Go here to verify Java Version: http://javatester.org/version.html
what version do you have?

go here: http://javatester.org/enabled.html and report what it says
In the LIVE box: what does it say?
 

Read other 1 answers
RELEVANCY SCORE 61.6

On startup this error always comes up from "Java Virtual Machine Launcher" saying "program could not find the main class, program will exit". its really annoying i wondered if anyone knew how i could get rid of it?

i have windows xp home edition
i have no idea what program this is coming from although i think it might be something to do with limeshop because when i try and uninstall that the same error message comes up. (limeshop that comes with limewire)

if anyone can help that would be great!
 

Read other answers
RELEVANCY SCORE 61.6

I can't get rid of this popup every time I open my pc.
I have tried everything.
Here's the error :

Java Virtual Machine Launcher
Error : could not open 'C:\Program Files\Java\jdk1.6.0_21\lib\amd64\jvm.cfg

There is no amd64 folder in the jdk1.6.0_21

Thank you.
 

A:Java Virtual Machine Launcher error

I don't actually know the answer to your problem, but there may be a clue in the error message where it refers to ' jdk1.6.0_21\lib\amd64\jvm.cfg' .

JDK refers to the Java Developers Kit, which is only needed if you intend to develop your own java applications or applets (see the explanation on the Sun download page;http://www.oracle.com/technetwork/java/javase/downloads/index.html). If you aren't a developer you probably have the wrong type of Java installed which is looking for a component you don't have.

As the JDK also includes the JRE that end users need, you probably don't need to do anything until you upgrade to the next JRE version when the next security scare turns up! If the popup is too irritating, I suppose you could uninstall the JDK and replace it with the JRE (although there are a few threads around here where people are having problems with Java uninstall and reinstalls).

As a matter of interest, do you by any chance have an AMD 64 bit processor, since that is the other thing the error message appears to mention?
 

Read other 3 answers
RELEVANCY SCORE 60.8

Hello,

I want to run a virtual machine but I got the blue screen!
My computer works fine with all the programs except when I a want use the virtual machine.

I got this message "Driver IRQL NOT LESS OR EQUAL

BCCode: d1
BCP1: 0000000000000000
BCP2: 0000000000000002
BCP3: 0000000000000008
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1


I just have a basic knowledge on computers, so I don't know what can I do!

Thank you!

A:BSOD when running virtual machine error 0x000000d1

Code:
fffff800`00b9c5a8 fffff880`010c8000Unable to load image \SystemRoot\System32\Drivers\sptd.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sptd.sys
*** ERROR: Module load completed but symbols could not be loaded for sptd.sys
sptd+0x52000

Code:
fffff800`00b9c7a8 fffff880`012a8dbaUnable to load image \SystemRoot\system32\DRIVERS\iaStor.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for iaStor.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStor.sys
iaStor+0x3adba
Hi rino009.

Before we suggest any troubleshooting steps, upload your MSINFO32.nfo file.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.
It is a must to see before saying anything to you.

Read other 9 answers
RELEVANCY SCORE 60.8

Hi, it looks like some time ago my computer got infected. I tried to delete the virus manually, so I erased a file called servidorcito.jar (that's Spanish for "little server"). After that, the following dialog box keeps popping up every minute or so. If I don't dismiss it, it just sits there and a new one does NOT pop up.
 
Java Virtual Machine Launcher
Error: Unable to access jarfile c:\Users\RRP\AppData\Roaming\Frutas\servidorcito.jar
(OK button)
 
Things I've tried:
Verified that .jar files are associated to javaw.exe
Checked startup items for calls to javaw.exe (found none)
Looked in registry for the string "servidorcito.jar" or suspicious uses of javaw.exe (found nothing)
Scanned whole computer with AVG free (found nothing)
Checked HiJackThis log for any obviously related items (found nothing)
 
The problem does not appear when only Java 32-bit is installed, it only appears when I install Java 64-bit. Uninstalling Java 64-bit makes it go away.
 
I've attached a picture of the dialog box and the DDS attach.log.
 
Here's dds.log:
 
DDS (Ver_2012-11-20.01) - NTFS_AMD64 
Internet Explorer: 11.0.9600.17126
Run by RRP at 2:28:32 on 2014-08-08
Microsoft Windows 8.1 Pro  6.3.9600.0.1252.54.3082.18.6125.3192 [GMT -3:00]
.
AV: AVG AntiVirus Free Edition 2013 *Enabled/Updated* {0E9420C4-06B3-7FA0-3AB1-6E49CB52ECD9}
AV: Windows Defender *Disabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
SP: Windows Defender *Disabled/Updated* {D68DDC3A-... Read more

A:Java Virtual Machine Launcher error keeps popping up

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything.
We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.
To help Bleeping Computer better assist you please perform the following steps:
*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/543696 <<< CLICK THIS LINK
If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.
***************************************************If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lower right hand of t... Read more

Read other 3 answers
RELEVANCY SCORE 60.8

I am trying to to a repair installation on my Win7(64) Pro system: the one called "Upgrade" which does not delete user files, settings or programs. Every time I try to run the setup program from the DVD I burned from the Digital Rivers ISO I downloaded, the installation stops and I get the following Compatibility Report: "The following issues are preventing Windows from upgrading...Setup was unable to determine whether there is any virtual machine installed."

I've no idea what this means but want to fix the problem so I can run the repair installation setup. Any ideas?

A:Repair installation: error message about virtual machine

Wild guess: Do you have XP Mode installed? If so, try uninstalling it, see if that helps.

Have you tried disabling your anti-virus, shutting down everything you can then try the Repair? You could even try How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

If nothing else works, backup your data and Clean Reinstall - Factory OEM Windows 7

It wipes everything so you definitely need to backup first. I know this is not what you want to do but it may be the best way to fix the problem ad Google had nothing to offer for this problem.

Read other 7 answers
RELEVANCY SCORE 60.4

Hey all. I just recently purchased a laptop with Windows 8 and wanted to set up a VM of Windows 7 on it. I have never worked with VM's before and I'm ready to get it going. Could anyone provide any help as to how to do it. Thanks!!!

A:Windows 8 Machine Running Windows 7 Virtual Machine

Hi there,

For beginners I recommend VMware Player:
VMware Player: Run Windows 8, Chrome OS on a Virtual PC
It's free.

You can also find it on filehippo for example.
The install process is easy to follow and the VM's work nicely.

There are other visualization products out there but this on is best to get started with.

Good luck

Read other 3 answers
RELEVANCY SCORE 60

hello everyone

lately I'm getting error massages every time i open skype :"Java virtual machine launcher", is it spyware or I need to download some new update for Java? , also My antivirus program detected virus "Trojan horse downloader", program says it's been cleaned but OS works relatively slow.
Please, any help will be appreciated.
with respect Russiko.

here is hijackthis log:

Logfile of HijackThis v1.99.1
Scan saved at 10:10:59 AM, on 6/4/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Wireless\Bin\EvtEng.exe
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
C:\Program Files\Intel\Wireless\Bin\WLKeeper.exe
C:\Program Files\Intel\Wireless\Bin\ZcfgSvc.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\ctfmon.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\ehome\ehtray.exe
C:\Program Files\ATI Technologies\ATI Control Panel\atiptaxx.exe
C:\Program Files\Intel\Wireless\Bin\ifrmewrk.exe
C:\Program Files\Zone Labs\ZoneAlarm\zlclient.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgcc.exe
C:\PROGRA~1\Intel\Wireless\Bin\1XConfig.exe
C:\WINDOWS\System32\aniServ.exe
C:\Program Files\Grisoft\A... Read more

Read other answers
RELEVANCY SCORE 60

Hello to everybody,
I am trying to post a help request here since is much time i try to solve this problem without success.
What brought me to post the help request is the new fact that i get the same error after ported my
system in a Virtual Machine.

I explain better.
Several years ago I purchased an HP Desktop P6228it equipped with Q8300 CPU and 6Gbytes of RAM.
It came with Windows 7 (don't remember if Pro or Home) and I updated it with W7 Ultimate.
It worked fine for long time when suddenly the DVD stopped to work.
I supposed to be an hardware failure so i didn't cared to much, it was not essential for me.
Then also the audio stopped to work. It was neither essential too, so i didn't cared.
Then I realized that some other "exclamation points" was showed in the Device Manager.
I have at moment a "code 3" for the following devices:
Audio, Intel ICH10LPC, Intel QuadCPU, Display, CD-ROM.
I tried to install a PicoScope device and also it have now a "code 3" error in the device driver.

Recently i virtualized all my systems as sort of backup procedure.
Also this PC has been virtualized and tested.
During the test of the virtualization on a completely different computer i surprisingly noticed that
also on the virtual machine the same errors was listed.
So i realized the computer has not hardware problems but completely software problems.
I would really appreciate an help about this "code 3" error.
I followed a number of hints and procedure... Read more

A:Driver Error code 3 with not working devices also on Virtual Machine

SOLVED!
I finally managed to solve it!
I have finally found this link:

windows 7 - Several devices in Device Manager have Code 3 error - Super User

The instructions are related to Win7 32 bit.
I exported a REG file of a Win7 64 bit machine I also have.
I imported in the defective o.s. and IT WORKED!

It has to do with a wrong setting of the file: wdf01000.sys
My registry was rather different than a working one.
It should look as:

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Wdf01000]
"DisplayName"="@%SystemRoot%\\system32\\drivers\\Wdf01000.sys,-1000"
"Group"="WdfLoadGroup"
"ImagePath"=hex(2):73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,64,00,\
72,00,69,00,76,00,65,00,72,00,73,00,5c,00,57,00,64,00,66,00,30,00,31,00,30,\
00,30,00,30,00,2e,00,73,00,79,00,73,00,00,00
"ErrorControl"=dword:00000001
"Start"=dword:00000000
"Type"=dword:00000001

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Wdf01000\Enum]
"0"="Root\\LEGACY_WDF01000\\0000"
"Count"=dword:00000001
"NextInstance"=dword:00000001

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Wdf01000\Parameters]
"MajorVersion"=dword:00000001
"MinorVersion"=dword:0000000b
"BuildNumber"=dword:00000000

==
I hope this info will help others!

GoodBye!

Read other 1 answers
RELEVANCY SCORE 59.6

The error we are receiving in the system log is as follows:

May 22 02:09:53 10.112.33.10 EvntSLog RealSource:"pscf-admin-1.xxxxxx.local" Event ID: 16 Microsoft-Windows-Diagnosis-PCW
4 NT AUTHORITY\SYSTEM Counter 18 of instance ({CD376BD3-9F6B-48C0-840E-1816B7A50FDC}, Default, 0) could not be modified. Error: "The parameter is incorrect."

I am unable to find anything on the Internet with the same error or any information about this error.



Anyone have any idea?

Read other answers
RELEVANCY SCORE 59.6

just recently my computer sends me this message when i first boot up. in the error box is the header JAVA VIRTUAL MACHINE LAUNCHER and the error message is this COULD NOT FIND THE MAIN CLASS. PROGRAM WILL EXIT.
i have no idea where or why this error has occurred, but i cannot make it stop. any help would be greatly appreciated.
thank you.
 

A:(Resolved) error message on boot up java virtual machine launcher?

Read other 12 answers
RELEVANCY SCORE 58.8

I have a laptop with windows 7 and for various reasons need to replace the computer. Bought a new laptop which comes with windows 10. If I were to just replace the hard drive in the old computer, I would just image the drive, put the new drive in, and then restore the image and be back in business. I would like to do a similar thing with what I have now and I think the virtual machine is the best way to go, just a little confused on the process.

1. What do I need to do with the old laptop that does the equivalent of imaging the drive so I will have a complete working windows 7 computer to use on the windows 10 machine? I will put this file on an external hard drive to then use with the new laptop. I think vhd is what I need, but keep reading about a 128GB limitation and the old laptop is more like 250GB.

2. After creating this file (vhd?), how do I create the virtual machine on the new laptop and then get the windows 7 copy to run. Most sites I have found talk about installing Windows 7 with the installation disk, but the image (vhd?) should already have all of this, correct?

If you could point me to which programs to use, I would appreciate it. I tried to create VHD with disk management, but it is greyed out if I select the C: drive and the system reserved partition. And step by step instructions would be helpful.

Thanks,

Doc

Read other answers
RELEVANCY SCORE 58.8

I am looking for a solution in order to have 3-4 users be able to Remote Desktop into
one XP pc all at the same time. Currently, when a user is logged on, and another person
tries to Remote Desktop into the same pc, it kicks off the first user.
I edited the termsrv.dll file in order to prevent this but it didn't work.
Any suggestion on a fix?
 

A:Virtual Windows machine

Read other 10 answers
RELEVANCY SCORE 58.8

Will the procedure in this link /www.howtogeek.com/171395/how-to-get-windows-xp-mode-on-windows-8/, using VMware Player, work in Windows 8.1 ?

A:Virtual machine in Windows 8.1

The link goes to Windows 8 Forums. Not howto geek.

Read other 15 answers
RELEVANCY SCORE 58.8

Hello,

I am using Virtual PC to run a Windows XP virtual machine on a Windows 7 Ultimate 64 Bit machine. Is there any way to somehow use the host machines USB ports?

The software I am needing to use on Windows XP requires an USB keycard to function, so I need some way to get it to recognise the USB ports.

Any suggestions or help?

Thanks! :)

A:USB in Windows XP Virtual Machine

Is the keyboard the main keybaord for the host system?

Read other 16 answers
RELEVANCY SCORE 58.8

I had installed windows 8 in VBOX. I could not get the sound to work. It stated no Audio detected. I uninstalled it, and reinstalled it in VMWARE. It is working fine. I tried to run it again in VBOX but the same thing, no audio drivers detected. I am running it in VMWARE and it is working great, so I removed VBOX from my CPU.[Note, I had originally had the Consumer preview running in VBOX with no trouble.

A:Windows 8 Virtual Machine

Here Vbox works fine installed on Win7 x64. I use Win 8 Release Preview x64 as a VM with no problems concerning sound.

You are probably using Vbox on Win 8 as a host.
There were still some problems with the support / installation of Vbox on Win 8 as a host. It failed to install and I had to fix Vbox manually.

Read other 2 answers