Over 1 million tech questions and answers.

Black Screen after Closing and Opening Lid M4700 Win 10 nVidia Quadro K2000M

Q: Black Screen after Closing and Opening Lid M4700 Win 10 nVidia Quadro K2000M

If the laptop is on and the lid is closed and then opened, the screen will remain black until either powercycled or an external VGA monitor is attached. The screen returns immediately once the VGA monitor is connected, and it stays lit when the external monitor is disconnected. This happens whether or not the user is logged in. The power options for Windows are set to "Do Nothing" when the lid is closed for both on battery and plugged in. This happens whether or not the laptop is plugged in.
When the lid is reopened, the backlight comes on, but the screen remains black. The OS accepts input -- if the screen is black and I type on the keyboard and then connect an external monitor, I can see the results of the typing. Doing Fn+F8 does not affect the black screen.
This is a fresh install of Windows 10 Pro Build 1703, Bios A16, with the latest NVIDIA Quadro K2000M driver installed (v21.21.13.7735, 1 May 2017) and the other latest patches and drivers. This does seem to be a software/driver issue because if Windows is put into hibernate mode instead of fully rebooting after the lid operation, the Dell logo will appear on the screen prior to restoring from hibernation, and the black screen will then continue after the UEFI boot has completed.
Apart from always shutting the system down completely before closing the lid or keeping a VGA monitor on hand, is there another solution to this issue?
chris.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Black Screen after Closing and Opening Lid M4700 Win 10 nVidia Quadro K2000M

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 109.2

Can someone tell me what's the difference between 1000m and k2000m ?!? becouse i have a Lenovo w520 / 15,6  2720qm 2,2ghz/16gb ram with 1000M and i found another laptop W 530 / 15,6. 3820qm 2,7ghz 8gb ram with K2000M ! should i buy that laptop ?!?

A:Nvidia quadro 1000M vs K2000M

any advice would be apreciate !

Read other 1 answers
RELEVANCY SCORE 89.6

Hi,I have serious problem with my HP 8760W Elitebook.I have upgraded to Win10 and everything was OK, I was more satisfied as with Win7Pro. But first time after month and second time after 3 months win10 crashed to repair screen and nothing was possible to do only clear installation of win 7 with disk format.I use all new drivers and bios - F.62. So I decided to stay with Win7, but now I have problem with graphics (nvidia Quadro 4000M). When I install nvidia driver (I have tried several versions including 341.95) it needs restart and then I get black screen during start and sometimes blue screen and it restarts  again. Only thing that will help is to use F8, start windows in safe mode and remove nvidia driver. Then it  again automatically load standard vga graphics driver. It uses only 16MB of memory, allows to run in 1920x1080 mode, but nothing more. Windows experience index is 1 due to graphics. What can I do to start running my nvidia quadro 4000m? Thank you very much.

Read other answers
RELEVANCY SCORE 83.2

I have recently purchased an XPS15 and lately have had the problem of the screen staying black after I close the lid and re-open it. Its setting is to got sleep after the lid is closed but the white light indicator on the front doesnt blink like its asleep anymore. I have changed all power setting back to default in an effort to fix the problem but It has not resolved the issue. If I close the lid momentarily then reopen the screen stays black and I have to hold the power button down for 5 second for a hard reboot.
Any ideas?

A:Black screen after closing and opening lid

Hi Danmoxi,

I suggest you to flash BIOS and update the video drivers.
Please click on this link, enter the service tag and click ‘Submit’. In the next page select the ‘Operating System’ from the dropdown lost and then click ‘BIOS’ and download the latest BIOS version.
http://dell.to/QjjZDA
Note: While flashing BIOS connect the Ac adapter and make sure the battery has minimum 15% charge as this needs uninterrupted power supply. Do not use the system till it restarts and comes up to the desktop.
Next go to the same link and click ‘Video’ and download the Video drivers. Restart the system and check. In case you find difficulty in finding the Video drivers, reply with the exact system model (e.g. L521X) and the operating system to provide the appropriate driver links.
Reply with the status to assist you further.

Read other 7 answers
RELEVANCY SCORE 79.6

Hi, all! I've had a strange, recurring issue for the past few months. It only has happened three times, and I can't reproduce it. Nothing appears in the event log after this occurs, other than the usual kernel power error from the computer turning off. 
 
This doesn't happen during intensive activities, just regular browsing. What happens is I lose display, and the (empty) disc tray begins to open and close while the computer attempts to reboot repeatedly. I then turn off the power supply, and my motherboard produces code 55-- memory not installed. I bring the computer into the kitchen to work on it, and the moment I plug it in and try turning it on in there, it's fine. I bring it back into my room and use it as normal, until this happens again like a month later.
 
I've run an overnight memtest and it comes up clean. Same for chkdsk. I'm not getting any regular bluescreens-- while I know that they've occurred in my 3-year-old machine's lifespan, they were unreemarkable one-offs. Things (connectors, mem sticks, graphics card) are re-seated occasionally while dusting, but nothing seems to be connected improperly, especially since the computer functions as intended 99% of the time.
 
I really have no idea what is happening. I don't have any spare equipment available to swap in and out. Is there any way I can figure out what's going on here? 
 
Specs: 
Stock Intel i5-3570k @ 3.4 GHz
Nvidia Geforce GTX 660 2 GB (EVGA factory OC)
8 GB Ram
1 TB HD... Read more

A:Sporadic black screen - CD ROM tray opening/closing - reboot loop

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post. 
Louis

Read other 4 answers
RELEVANCY SCORE 79.6

Hi,

I have a Satellite P500-15E and when I boot it the screen is black. I then close the lid to put it in Standby mode, then open the lid and the screen is working normally.

When the screen is black just after a boot, if I connect an external display, I can see everything normally on the external display.

My drivers are up to date.

What's the problem? Thanks a lot for your help.

Cheers

Read other answers
RELEVANCY SCORE 74.4

So I've had two of this model give me the same issues. When booting the display shows the Dell logo and the Windows logo and then goes black. You can hear the Windows chimes but there is no display.
If the lid is closed and the computer goes to sleep then is reopened the log on screen is shown.
We have tried re-image and reinstalling all drivers in the proper order.
Updating BIOS and making sure that the video settings are correct.
No matter what we do every time the computer is booted the logon screen is black.

Read other answers
RELEVANCY SCORE 72.8

I have a p71 with basic NVIDIA Quadro M620.Is it possible to upgrade to  a Quadro P4000 8 Go? I heard it was mxm boards.The idea is to be VR ready. Thanks in advance for your answers. Cheers, Greg 

Read other answers
RELEVANCY SCORE 71.6

Hi,I have in the past had a lot of problems with my Nvidia K2000M on my W530. Windows have kept disabling this due to "code 43" (Yellow triangle by the display driver).I have solved this by reinstalling Nvidia drivers, but when this happened every 3 days or so, I started to suspect something was wrong. And I believe I was right.... I tried to uninstall the driver (probably a mistake) before reinstalling the driver, but now the graphics card cannot be detected at all. When I try to install Nvidia drivers I get the following error message: "NVIDIA Installer cannot continue. This graphics driver could not find compatible graphics hardware". I also tried to disable optimus in BIOS, and enabled discrete graphics to try to force the computer to find the NVIDIA graphics card, but this obviously didn┤t work. The computer then starts up with low graphcis and bad resolution. Under "Display adapters" in Device Manager there is no card detected at all (As the Intel integrated was disabled). So, is my NVIDIA graphics card defective, or is there som other solution to try to detect it? PS! I Also did a system update through Lenovos update center. Updated firmware in BIOS etc. This did not solve the problem..... Thanks,-°  

Read other answers
RELEVANCY SCORE 71.6

Hi,I have in the past had a lot of problems with my Nvidia K2000M on my W530. Windows have kept disabling this due to "code 43" (Yellow triangle by the display driver).I have solved this by reinstalling Nvidia drivers, but when this happened every 3 days or so, I started to suspect something was wrong. And I believe I was right.... I tried to uninstall the driver (probably a mistake) before reinstalling the driver, but now the graphics card cannot be detected at all. When I try to install Nvidia drivers I get the following error message: "NVIDIA Installer cannot continue. This graphics driver could not find compatible graphics hardware". I also tried to disable optimus in BIOS, and enabled discrete graphics to try to force the computer to find the NVIDIA graphics card, but this obviously didn┤t work. The computer then starts up with low graphcis and bad resolution. Under "Display adapters" in Device Manager there is no card detected at all (As the Intel integrated was disabled). So, is my NVIDIA graphics card defective, or is there som other solution to try to detect it? PS! I Also did a system update through Lenovos update center. Updated firmware in BIOS etc. This did not solve the problem..... Thanks,-° 

Read other answers
RELEVANCY SCORE 68.8

Hi,I hope someone can assist me.  I have an M83, Quadro 410, Windows 10.  Ive updated the bios, NVIDIA drivers and all Windows 10, Lenovo updates. Using the VGA output the Quadro 410 works fine.  But when I try to use the Displayport output all I get is a black screen.  The screen is still on and not in screen saver mode. Any advice?Thanks Mat.

A:Displayport output Quadro 410 is black screen

How exactly is the DisplayPort (DP) connected to the monitor ?

Read other 3 answers
RELEVANCY SCORE 65.6

I regularly check for driver updates with the Lenovo tool.  Recnetly, I've noticed that I have the following driver that's called for as an update: NVIDIA Display Driver (NVIDIA N16S / Quadro N16P) However, I've never successfully gotten it to install.  Finally I manually downloaded it and ran the install.  During the CMD window that scrolls by with details, I see these lines at the end: INFO: Did not install 'c:\drivers\win\nvidiagraphics\nvidia\display.driver\nvlt.inf' because it is not better than the current drivers.INFO: Returning with code 0x100 Does anyone have any thoughts or ideas why we keep getting these types of driver 'updates' when they're not actually updates? Thanks for you input in advance!

Read other answers
RELEVANCY SCORE 65.2

Greetings all. I recently sold my Nvidia Quadro FX4000 256MB AGP graphics card on Ebay to a guy in Germany (I am in UK). Used the standard Ebay description tool which displayed it as PNY NVidia Quadro FX4000 256mb AGP card.

My question is: are there 2 varients of this card ie Nvidia and PNY? The guy is stating that I have sent him an Nvidia Card as opposed to a PNY card and is requesting a refund.

I sold the card in good faith (using the Ebay description tool) thinking that there was only one varient and the picture I took is exactly like the PNY varient too so I thought I was selling one in the same?

I would appreciate your views guys. I think maybe this guy is trying it on?

Many thanks.
 

Read other answers
RELEVANCY SCORE 63.6

I've read Quadro's are stable and highly recommended for CAD, etc workstations (not for gaming) and gaming cards are obviously better for gaming. I am looking to setup two separate dual output video cards in a new machine. It will be used primarily for streaming real time financial info/web surfing (no CAD nor any 3D modeling) with a secondary use of gaming (not important for me to run top games at top resolutions-average is fine). Should I look at getting Quadros or game cards. I am leaning toward the game cards like Nvidia 8600GT, etc as they are lower price and seems like if they can run games fast/no problem-why wouldn't they easily be able to handle business applications? Quadros seem to cost more and can mainly only be used for business apps?
 

A:Nvidia Quadro vs Nvidia gaming cards

Quadros are for Digital Content Creation and CAD purposes mainly. For you, a pair of 8600GTs would be fine.
 

Read other 1 answers
RELEVANCY SCORE 62.8

Hello, I'm new here. I have a problem like a fellow poster:

http://forums.techguy.org/malware-removal-hijackthis-logs/852216-blue-screen-death-likely-cause.html

The same screen pops up when I shut my laptop and open it up again. I would love to know how to get rid of this....Thanks.
Logfile of Trend Micro HijackThis v2.0.3 (BETA)
Scan saved at 2:54:29 PM, on 13/01/2010
Platform: Windows Vista SP2 (WinNT 6.00.1906)
MSIE: Internet Explorer v8.00 (8.00.6001.18865)
Boot mode: Safe mode
Running processes:
C:\Program Files (x86)\TrendMicro\HiJackThis\HiJackThis.exe
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://www.toshiba.ca/welcome
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://go.microsoft.com/fwlink/?LinkId=69157
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://www.toshiba.ca/welcome
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http://go.microsoft.com/fwlink/?LinkId=54896
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896
R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.toshiba.ca/welcome
R0 - HKLM\Software\Microsoft\Internet Explorer\Search,SearchAssistant =
R0 - HKLM\Software\Microsoft\Internet Explorer\Search,CustomizeSearch =
R0 - HKLM\Software\Microsoft\Int... Read more

A:Blue Screen after opening and closing laptop

*Added HJT Log*
 

Read other 1 answers
RELEVANCY SCORE 62.4

Hi

I have a problem on my pc.. It appears on my nba 2k12.. when i use print screen and transfer to the paint.. it appears an image of black screen (black screen of death).. does anyone who can fix it? as easy as 123?.. and also I'm looking for Nvidia OpenGL software I think that is the problem.. also my nvidia appears a message like this: "NVIDIA Control Panel Application, 3.9.731.0 has stopped working" need help guyz.. thank you and god bless.

A:Need Help: Nvidia OpenGL! Black Screen! NVIDIA!

Click Properties on the game exe/icon, then on the compatibility tab check: Disable desktop composition then restart the game. It disables the win7 aero theme when you run the game which will allow you to capture your screen.

Read other 2 answers
RELEVANCY SCORE 62

If I let the computer sit unused, the screen goes black, as most monitors would; however, the screen stays dark when I move the mouse or hit buttons or something. Similarly, if I close the lid of my laptop when its turned on, and then open the lid, the screen stays black. Not only that, but when I closed the lid of the laptop, the computer never turned off. It was still running.

I reset the power options to default as well, so there is nothing wrong there.

Perhaps I should also mention that the screen successfully turns off and on in safe mode?

edit: Just tried a system restore to two weeks ago and the system crashed. Both times.

A:My screen stays dark after closing and opening lid of computer. Help?

Can you be a bit more clear?What is your graphics driver and computer model?
Or do you really need your screen to go black after sometime?If that's necessary turn all the power options to none
and try cleaning the pc with an antivirus

Read other 3 answers
RELEVANCY SCORE 62

I have two computers that have win 7 x64 pro/ult. Recently, both computers, after typing in my poassword for login to windows, I get the desktop, icons, the hardware meter gadgets, then a windows pops up, near the top left corner, about a 1/6 of the screen size, and it immediately closes. It isn't there long enough for me to read anything in it, or even see if there is anything in it.

Under start-up folder in the start menu, both computers do have logitech registration. I click it, fill it out, and re start the computer. Still happens, and the start up folder still has logitech's product registration there. I complete it, restart the computer, and the window still shos up, then closes. Damn near instantly. Under start-up, the logitech thing is gone, so it is blank. But it still happens.

Installing the webcam and using it for Logitech Vid, is the only thing I have changed recently on both computers. Also, windows 7 did have an update, monday i believe...

Any thoughts? I have no idea what to look for in regedit.

A:window screen opening and closing at startup, instanly.

Type event viewer in search and see if anything appears there, that might be an answer

Try in safe mode

Try a clean boot to try to localize the cause.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

Unless on a network, if two computers just started this recently, it is something that you did.

Read other 8 answers
RELEVANCY SCORE 62

If I let the computer sit unused, the screen goes black, as most monitors would; however, the screen stays dark when I move the mouse or hit buttons or something. Similarly, if I close the lid of my laptop when its turned on, and then open the lid, the screen stays black. Not only that, but when I closed the lid of the laptop, the computer never turned off. It was still running.

I reset the power options to default as well, so there is nothing wrong there.

Perhaps I should also mention that the screen successfully turns off and on in safe mode? The computer, however, does remain on instead of going into hibernation.

I had another problem where safe mode worked but a normal boot did not, just yesterday. and the people on techguy helped me then too; I'm not sure if it's related, but here is the link to that solved thread:

http://forums.techguy.org/windows-7/1033132-solved-computer-freezes-seconds-after.html#post8199473

Edit: (3:49) Just tried a system restore and the the computer crashed for both attempts. The program WhoCrashed had this to say about it:

"On Thu 12/29/2011 11:42:06 GMT your computer crashed
crash dump file: C:\windows\Minidump\122911-18064-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x7CC40)
Bugcheck code: 0xF4 (0x3, 0xFFFFFA80051FDB30, 0xFFFFFA80051FDE10, 0xFFFFF800033DD8B0)
Error: CRITICAL_OBJECT_TERMINATION
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft« Windows« Operating System
company:... Read more

A:My screen stays dark after closing and opening lid of computer. Help?

On some laptops you have to press the power button briefly to take it out of hibernation. Have you tried that?
 

Read other 2 answers
RELEVANCY SCORE 62

It started recently out of the blue (no pun intended). Whenever I open and wake my laptop up, I get a BSOD with IRQL_NOT_LESS_OR_EQUAL, 0x0000000A.

I attached the file from the SF diagnostic tool.

Thanks a million, in advance.

A:BSOD after closing and opening laptop screen. 0x0000000A

Debug blames:WRkrn.sys

Webroot SecureAnywhere Essentials driver
Webroot SecureAnywhere Anti-virus driver

Uninstall and test for bluescreen.

Let us know how it goes.

Read other 3 answers
RELEVANCY SCORE 61.2

Hello, for the past few weeks my computer has been shutting down to a black screen randomly, but it seems to mostly occur after I close a game (such as Overwatch) that has been open for more than an hour. During a crash, I can still hear audio being played through my headphones and my computer's fans will spin at maximum speed until I shutdown the computer manually. Crashes will not occur if the computer is left idle for days at a time. I suspect the first shutdown was due to an overheat and that may have left heat damage but I am unsure. The computer is a custom build, and I already have eliminated power supply, temperature, and drivers as likely issues but I can provide more information if needed.
Thank you

Read other answers
RELEVANCY SCORE 61.2

Hello, for the past few weeks my computer has been shutting down to a black screen randomly, but it seems to mostly occur after I close a game (such as Overwatch) that has been open for more than an hour. During a crash, I can still hear audio being played through my headphones and my computer's fans will spin at maximum speed until I shutdown the computer manually. Crashes will not occur if the computer is left idle for days at a time. I suspect the first shutdown was due to an overheat and that may have left heat damage but I am unsure. The computer is a custom build, and I already have eliminated power supply, temperature, and drivers as likely issues but I can provide more information if needed.
Thank you

Read other answers
RELEVANCY SCORE 61.2

Hey guys,

I just joined this forum after installing Windows 7 over my Windows XP (which gave me absolutely no problems at all) out of curiosity. I love this OS! I really do!

The only problem I have is that when I open or close certain programs I get an unavoidable 'black screen'. IE: When I get done watching some Death Note in Windows Media Center (full screen) and I decide to close it, occasionally it will close and just go blank. My monitor doesn't detect that it's been turned off, or that there's a problem. So I'll do what a lot of people do, and ALT-CTRL-DEL once or twice to try and bring up that screen. No luck. The only time I can retrieve everything and save my data before shutting off my computer is if I have an unfinished word document and when I press my power button the screen comes back on and viola! I see windows again! It then asks me if I want to save my work, click cancel, I can resume my Windows 7 enjoyment.

Well, because I press the power button and Windows wants to shut down, it closes out of some services and other programs, so I'm limited (barely, but limited) to what I can do.

It is not only WMC that causes this. I play Combat Arms in full screen, and occasionally when the program opens (into it's full-screenness) it will black screen (and I can still hear the music, so the computer isn't crashing) or when I exit the game. For a bit I thought it was just when I play stuff in full-screen and my video card gives out. So I open Game Maker, and I attempt... Read more

A:Black screen after closing certain programs.

55 views and no replies? Okay... Thanks a lot, guys.

Read other 2 answers
RELEVANCY SCORE 61.2

I left my laptop on and had to leave so I simply shut the lid down. About 2 hours later, I lifted the lid and got only a black screen. I moved the mouse around to get it to come on but it would not. After about 5 tries on holding down the button in which to start up my laptop or turn off in this case, it finally turned off then I was able to turn it on and all was fine. I held it down for about 15 seconds. So, question is why wouldn't my laptop become active again when I opened the lid, etc?

Here are some of my specs. Don't know if anyone needs it.

Model Number: Toshiba Satellite S875-S7240
Operating System: Windows 7 Home Premium 64-bit
Processor Brand: Intel
Processor Type: Intel Core i5-2450M Processor
Processor Speed: 2.50 GHz, 3 MB L3 Cache
System Ram: 6 GB
Hard Drive Size: 750 GB
Max. Memory Expansion: 16 GB

A:After closing laptop lid, can't get out of black screen

Once you left it on sitting idle for that much time a kind of permanent hibernation mode set in where powering it down was the only option you had available. When you know you won't get back to it within a short period of time you are far better simply shutting it down to start with. This is how many laptops work.

One of the main reasons would be conserving battery power. This is why the display will turn off after so long until touching the pad or moving any mouse you have plugged in so the battery charge will last longer. You have to be prepared for this type of situation with anything battery powered to begin with including netbooks, tablets, cell phones., smart phones, etc..

Read other 9 answers
RELEVANCY SCORE 60.4

I have 2 dos based programs I use, 1 is a version of Quicken and the other is IPMS. Recently everytime I close 1 of them the screen goes black and is unresponsive to commands. The only thing I can do is reboot the computer. The only thing has been done the machine recently is I upgraded the ram from 256mb to 1gb. If anyone has any idea what could be cause this I would greatly appreciate the help.

Read other answers
RELEVANCY SCORE 60

Does anyone know if it is possible to get one of these suckers to work with Win7 x64? I bought the thing back when it was brand new and I spent like $600 on it and I don't want to have to give it up. Any advice would be much appreciated.

A:Nvidia Quadro NVS 400

  
Quote: Originally Posted by jnkueppers


Does anyone know if it is possible to get one of these suckers to work with Win7 x64? I bought the thing back when it was brand new and I spent like $600 on it and I don't want to have to give it up. Any advice would be much appreciated.


here is a link to the latest drivers ,have you tried these? NVIDIA DRIVERS 197.54 WHQL
if you still dont have success loading them, try installing them in compatibility mode Compatibility Mode good luck ,post back if you need more help

Read other 7 answers
RELEVANCY SCORE 60

Two primary issues: 1. When closing computer after use (not powering off, just closing laptop) and then reopening, 15% of the time it is black when I reopen and I have to reboot (subsequently losing any unsaved work and needing to reload browsers. 2. The touchpad doesn't work 75% of the time, I have to use an external mouse.  Has anyone encountered these issues? I bought my HP Stream 11 in August 2015 and supposeduly my warranty expired Dec 2015. Does that seem right? Has anyone found success calling HP and avoiding paying the phone fee?

Read other answers
RELEVANCY SCORE 59.2

I've always shadowed the forums, but never had to actually ask my own question before, so bear with me a moment;

Normaly I'd throw out a system info report, but I can't actually access the PC in question at the moment, so I'll have to roll with what I know. Here goes.

I'm running a stock Dell Precision 390 desktop with an Nvidia Quadro card and running Windows XP. At the moment it's connected to my Bush LCD via the stock Dell-VGA splitter and it runs fine... sort of. Before the main problem there is a small irk I have with the system itself in that it can't seem to make up its mind which ports and cables it wants to work with. Each and every time I update my drivers (I know that there haven't been new ones released in a while, but there are two [one with OpenGL but older, one without but newer] that I find myself needing to switch between now and again) the port on the tower that i need to plug the splitter into OR which of the VGA split-cables i need to plug into the LCD. If that doesn't make a whole load of sense don't worry too much, it's just a secondary problem that I'd like very much to know if there's a way to force it to always use the same port/cable.

Onto the main event, however: along with the VGA splitter supplied, I was also given a HDMI splitter, however not once in all the tweaking and changing of drivers have I been able to get the LCD to recieve a signal. I wouldn't even be wanting to sw... Read more

Read other answers
RELEVANCY SCORE 59.2

Has anyone found a Vista 64 driver that works on a Nvidia Quadro 4 card. I think it is a 750xgl.

Thanks

Read other answers
RELEVANCY SCORE 59.2

My nvidia quadro fx 3400 is overheating
At least that s what i think when i turn up the graphics on my games it scrambles up the objects and does a fan like feature.
I have felt the card its pretty dang hot, and the fan is spinning quite fast
Any help ?

Is this even the right place to post this lol
This is a pic of what it looks like
 

A:My nvidia quadro is overheating please help

Have you tried reseating the heatsink with some artic silver? Passed that, how's the air flow in your case?
 

Read other 2 answers
RELEVANCY SCORE 59.2

Hello guys,

I got a nVidia Quadro FX 2000 graphics card.

I was wondering if this graphic card could do a spilt screen so I can do two things at once.

If anyone knows can you get me a step by step tutorial on how to do this, it would be much appreciated.

Thanks in advance.

A:Nvidia Quadro Fx 2000

Hi joeey.s.
If all you want to do is split the desktop in half with two different apps open and in view, windows will do that.
Right click the taskbar and select "Tile Windows Horizontally\Vertically", depending on your viewing preference.

Read other 1 answers
RELEVANCY SCORE 59.2

hi all, ive just brought a second hand pc which has a nvidia quadro4 900 xgl card installed the problem is ive re installed my medal of honor game, allied assault plays ok but breakthough & spearhead keep chrashing on start up does any one know if this card handle games like this or do i need to change any settings, thanks
windows xp (sp2)
1gb of memory
intel xeon daul core 2.4ghz processer
 

A:Nvidia Quadro 4 900xgl

I don't think the quadro is used for the games, only for the development and workstations uses only.

I may be wrong, so It is appropriate if you hit up on the google.
 

Read other 1 answers
RELEVANCY SCORE 59.2

The new Quadro CX card has been designed to deliver 192 CUDA parallel processor cores, a total of 1.5GB of GDDR3 memory with 384-bit memory interface. The memory bandwidth is specified at 76.8GB/s and, as you might expect from such a monster of a card, it comes with some hefty power requirements for a maximum of 150W. The card itself is equipped with a dual-slot cooling system, and provides just one dual link DVI port. Additional specifications include support for NVIDIA's SLI and CUDA technologies, as well as for DirectX 10 and Shader Model 4.0.

Read more at the source.







Later Ted

A:NVIDIA Intros Quadro CX

Now i would sell a kidney for that. Looks freeking awsome

Read other 4 answers
RELEVANCY SCORE 59.2

I have a Lenovo T61, and the driver that windows automatically installs doesn't work right, and openGL doesn't work. The install package I have from the lenovo site would fix it, but I can't install it because it has to be Windows 2000/XP/7. Any way to get around this? Is there some way to manually install the driver or something without the setup package?

A:NVIDIA Quadro NVS 140M

nevermind found out something hahahahha oops

Read other 1 answers
RELEVANCY SCORE 59.2

I have an nVidia Quadro in my desktop here at work, just installed Windows 7 Pro 32Bit (trying all the flavors before rolling out to prospective clients).

I can get multiple displays running but I've encountered a problem that has driven me to the breaking point.

From my onboard VGA, I can get full resolution and a great picture. From my Quadro all I get in dual dispaly (not the full 3 or 4 I want) and when it does display on two screens together, it's mirrored.

The display options are only seeing the monitors and Generic PnP and it detects the two both as monitor "1". Their resolution is stuck to 1024x768.

Here's the stranger part: In my Hardware Profiles, it has 2 Standard VGAs listed in Device Manager and 2 "Intel(R) 82915G/GV/910GL Express Chipset Family". One of the "Intel" chip and one of the "Standard VGA" each are showing that the devices could not start.

I've uninstalled the drivers for all 4, rebooted, removed them from device manager and even switched my BIOS to boot from the onboard instead of Auto (Dell BIOS).

To finally confound things more, when I do reboot, guess what displays on the BIOS? QUADRO!

My BIOS obviously recognizes and identifies the card, but 7 is just throwing it down. I've tried the new Forceware drivers as well as every driver nVidia had listed for Windows 7 32bit for every model of NVS Quadro with no avail, it just says that no matching hardware is found.

Can this be addressed and fixe... Read more

A:NVidia Quadro driver help

I think this is a windows seven configuration problem as in a previous post where someone wanted to run 2 displays from 1 card in PCI-e and 1 from a pci slot. Yet would get an error 10 message pci bridge to pci bridge. Yet he could run this setup in XP. My first thought for you is to load the display driver that is showing the PnP display, as well as the drivers for the other 2 displays. but if the graphics chips are not compatible your going to have issues. onboard VGA chip verus Quadro chip displaying at different refresh rates and resolutions. Of course with the new ATI Hd 5870 you can run 3 displays from 1 card 2 dvi and 1 hdmi, all for around 380.00. Anyway at this time I don't think windows seven from all the articals I researched for the other thread is capabel of these kind of 3 display configurations. Sorry I know this is of no value to you but thought I'd throw in my 2 cents worth . Here is a great artical on ATI's new eyefinity techknowledgy ATI Radeon HD 5870: DirectX 11, Eyefinity, And Serious Speed : Introduction - Review Tom's Hardware by the way these cards are now for sale at the egg. Welcome to sevenforums and let us know if you figure this out. Fabe

Read other 1 answers
RELEVANCY SCORE 59.2

I bought a PCI-Express graphics card off eBay because the seller said it was a PCI graphics card. Well, it was only $20 so shipping it back probably would not be worth it. I wanted to put this in my old desktop to make it a bit more useful, but it has AGP, and PCI, not PCI-Express.

I don't see how it could be at all useful to put into my new desktop, as this is a 128 MB graphics card... it does have dual DVI ports though.

A:Nvidia Quadro FX 1400... What to do with it?

You can look around for a convertor: here i did a google search for you :P pci to agp - Google Search

Read other 2 answers
RELEVANCY SCORE 59.2

Does anyone know if there is Nvidia Quadro NVS 110M drivers for Windows 8?

I cant seem to find any and Windows 8 installs some Microsoft Basic driver which doesnt work properly.

Thanks.

A:Nvidia Quadro NVS 110M

Hello sudohost, try installing the Windows 7 drivers

Read other 17 answers
RELEVANCY SCORE 59.2

HiI am a user of pavilion dv4 1404tu, i am using this laptop since 2009 and i am pretty happy with the performance of the laptop. but from last some months i am facing some problems and i dont kno how to troubleshoot my problem.everytime i am using my laptop and using multiple apps like playing music while suffering internet or working on ms office , my laptop get close within 2 or 3 hours and leave a black screen. it just not get start even if i forcefully restart it. everytime i press power button and restart it just open with same black screen. i have already reinstal the drivers and window (window 7 ultimate 64 bit), but still the problem is not solved yet. but if i leave ,my laptop power off for some hours it restart properly. anyone who have any idea about it? what is the problem and how to troubleshoot it? 

Read other answers
RELEVANCY SCORE 58.8

Hi all

Thaught I'd make a post of this since I had trouble getting my graphics driver working with build 7264 x64 and the latest 7600 x64 release..

The driver I used earlier was presented on windowsupdate as a
(WDDM Pre-release) (does not show up with build 7264 x64 and latest 7600 x64)

Download this driver -> http://www.laptopvideo2go.com/nvidia...24_win7x64.exe

When you extract it you will find a zip archive called: additional_infs.zip
Inside this archive extract the file called: nvlt.inf

Put it with the rest of the files you extracted from the .exe file.

The driver is not digitally signed, but you will at least get your videocard working

/Ralphert

A:Lenovo T61 with Nvidia Quadro NVS 140m

Champion post, have been looking all day for this information.

Read other 7 answers
RELEVANCY SCORE 58.8

Hi all

I wonder if anyone can help out what seems the problem. The card used to work before I reinstalled Windows.
Thanks

Read other answers
RELEVANCY SCORE 58.8

Hello all,

I need to set up a computer with 5 different screens for a restaurant menu. Only images will be displayed on 5 tv.

I made some research online to find one or two graphic cards that could connect 5 tvs on it.

I found a great Nvidia video card with 4 display slots that is very cheap! (see link below). My idea is now to buy a computer that have a normal graphic card and to install this second card which mean that they will be 5 different outputs!

I did some research of which motherboard I need and apparently I need a 'pci express x16' motherboard with a free slot. I also saw that both cards need to be in the same family (NVS I guess)

I was wondering if someone could guide me with this ... ideally I would like to buy a computer already made, and just need to insert this card into it to make it work.
Is there someone that could advice me on a computer where this card would be compatible? I am looking for a 'cheap' one and can't spend a lot of money on it.

If anyone got any advices or link for a computer that would work, please let me know!

Many thanks,

https://www.amazon.co.uk/gp/product..._rd_t=36701&pf_rd_p=867551807&pf_rd_i=desktop
 

Read other answers
RELEVANCY SCORE 58.8

Who is right - who is wrong ... if any?! I have a ProBook 470 G2 G6W69EA running Revit and Autocad Architecture, and it is not working to well.So i am thinking of buying a ZBook 17 G3 instead, and when comparing the different specs, I came across this : According to NVIDIA at http://www.nvidia.com/object/quadro-for-mobile-workstations.html  the Quadro M2000M is made for the 15,6" platform.Among others, HP ZBook 17 G3 - T7V62EA#ABY is according to HP spec built with the Quadro M2000M, though it according to NVIDIA should be the M3000M when on a 17,3" platform.Is that perticular ZBook proper built, or is it "money down the drain" not to go for something like the Y6J67EA  with Quadro M3000M instead? 

Read other answers
RELEVANCY SCORE 58.8

Does any one know if the Dell Nvidia Quadro 3000M graphics card will support DP 1.2 and MST? Looking to attach a StarTech MST Hub to enable 4 monitor support and these two items are the requirements for it to work.

Read other answers
RELEVANCY SCORE 58.8

I an trying ti install a video graphics card, when I plug in to my pci ex slot and plug in the leads the screen does not work, but the computer does, now I see that I have a pnp monitor but the card and a vga adapter on it, I have tried everything possible but cant get to work, anyone any ideas?????????
 

Read other answers
RELEVANCY SCORE 58.8

Hello, all,

My system:

Computer: IBM Intellistation M Pro, model 6849-52U
Mobo: Intel D850GB
CPU: Intel Pentium 4 with 256 Level 2 cache
RAM: 1GB PC 800 Rambus RIMM
Video: Nvidia Quadro 2 Pro/Nvidia Quadro FX 1100
AGP 4X slot
Power Supply: 340W
OS: Win2K SP4 (Computer has Microsoft Win2K COA)


This is a workstation that I bought used (eBay) to run high-end engineering graphics. It came with the NVidia Quadro 2 Pro board (64 MB) which was an OEM option. I recently bought the Quadro FX 1100 (128 MB) used (also eBay) for the additional 64 MB to bring video up to snuff for the graphics I want to run.

The Quadro FX 1100 installed just fine, and I noticed improvement in video performance from the added RAM. When I got curious and started really digging thru the info in the NVidia View program that comes with the drivers, however, I noted that the board is running at PCI X 0 speed, rather than at AGP 4.

I don't know what the Quadro 2 Pro was running at before the upgrade, as I hadn't paid a whole lot of attention to the graphics before I did the upgrade. I did reinstall the Quadro 2 Pro card and drivers, though, and the Quadro 2 Pro also runs as PCI X 0 now. It probably was running at the same speed before I installed the Quadro FX 1100.

As the computer was designed to run the Quadro 2 Pro, something about the way I have the computer set up is most likely the problem.

I have checked the obvious things (BIOS settings, power to board... Read more

A:Nvidia Quadro AGP cards recognized as PCI

This sounds to me like a reporting error. If everything's running fine and faster than before, I'd tend to believe that you're running at the 4x speed and the nView program isn't reading this correctly.
 

Read other 2 answers
RELEVANCY SCORE 58.8

Hi there,
Just bought a new computer with Windows 7 and Nvidia Quadro FX 580.
After startup I am getting BSOD with:
attempt to reset the display driver and recover from timeout failed

I tried every single avilable driver for this card - nothing helps.
I would very much appreciate any help here.
Thanks in advance.

A:BSOD in Windows 7 (Nvidia Quadro fx 580)

Please provide us with the information in this post to get us started: http://www.techsupportforum.com/1871981-post2.html

Read other 1 answers