Over 1 million tech questions and answers.

Solved: Help! Settings for HTTP port (80), HTTPS port (443), FTP port (21)

Q: Solved: Help! Settings for HTTP port (80), HTTPS port (443), FTP port (21)

Well, this has me baffled. My Bell Internet Security Services Activation (I just installed it on a computer not used for some 4 or 5 months) popped up a window saying "Waiting for Internet connection"...and waiting and waiting. But my Netgear wireless connection to the router in the house indicates "very good" signal strength, which I thought meant I was connected. Obviously not!

I tried opening IE. "Internet Explorer cannot display the web page" (much as I expected)

Clicked the button which was showing on the IE cannot connect page "Diagnose connection problems" and followed the instructions. The final diagnostic is "Windows cannot connect to the internet using HTTP, HTTPS or FTP. This is probably caused by firewall settings on this computer. Check the firewall settings for the ports HTTP...etc." Where on this earth are they?!

I checked the Windows Firewall settings and found it "off (not recommended)" so I switched it on.

I re-ran the diagnostic on the IE page and nothing has changed.

My question is:

How do I check the settings for HTTP port (80) and HTTPS port (443) and FTP port (21)? Also what do I set them to?

Many thanks, in advance, for a solution to my problem!

RELEVANCY SCORE 200
Preferred Solution: Solved: Help! Settings for HTTP port (80), HTTPS port (443), FTP port (21)

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Solved: Help! Settings for HTTP port (80), HTTPS port (443), FTP port (21)

So you just installed an Internet Security Suite which has a Firewall built-in and then you enabled XP' built-in firewall? I am baffled as to why you would do that. The new software you installed has to be blocking it somehow. I would search their website for known issues.
http://www.securityservices.sympatico.ca/ssp.do?lang=en

Or just uninstall it and use something different.

Read other 3 answers
RELEVANCY SCORE 186

I am a beginner really and got this message after eliminating (hopefully) a prgram called Antivirus Action from my computer. I can't get on the internet because I keep getting this message. Any help would be greatly appreciated!
Mike
 

A:Firewall Settings HTTP (port 80) HTTPS port 443 FTP port 21 error message

Open Internet Explorer. Click Tools > Internet Options > Connections > Lan settings > Proxy server > Advanced. Delete the proxy server settings under HTTP, HTTPS (secure) and FTP (and Socks, if any). Then, under Proxy server, uncheck all boxed.

If running Firefox too, disable proxy server.
 

Read other 3 answers
RELEVANCY SCORE 186

I have suddenly gotten this on my main computer. (Windows XP)
A previous techguy thread (expired) said to check my dns numbers with "jpconfig /all"
However, my computer will not allow me to run that program in safe mode.
Is it a bug issue... or will that program only run in full mode?
 

A:Firewall Settings HTTP (port 80) HTTPS port 443 FTP port 21 error message

Dear mulebit,
It actually is " ipconfig /all " i.e replace" j"with "i".Please go to command prompt under Start--> Programs-->accessories. No need for "safe mode" to carry out this task. Can you kindly provide details of your computer specifications? Are you using a third party firewall and if so which brand? What security software are you running?
 

Read other 3 answers
RELEVANCY SCORE 186

Hello all. I was talking on skype and lost internet connectivity while talking. I received the error above (Firewall Settings HTTP (port 80) HTTPS port 443 FTP port 21 error message). I am running a laptop with windows XP and IE 7 and my antivirus is AVG and I also have Ad-Aware.

I'm not much of a computer person but I did some research online and tried a few things: I turned off the option on skype's advanced settings for it to listen on Port 80 and then rebooted. I also ran a command, 'netstat -aon' and did not find a listing of 1270.0.1:80/443 or 0.0.0.0.80/443 which seems to imply that nothing should be affecting port 80 or 443.

I also downloaded firefox and it cannot access the internet either. The only way I'm able to access the internet at the hotel I'm located at was to call the hotel's tech support and they had me go into the LAN settings of internet options and manually select port 8080.

Any more suggestions would be greatly appreciated!

Thanks,

Mike

A:Firewall Settings HTTP (port 80) HTTPS port 443 FTP port 21 error message

Some info on common ports used, http://www.chaminade.org/MIS/Articles/Fire...ortSecurity.htmI don't know much about connectivity problems...but it seems to me that...if you never had this problem before and your system connects properly outside of this hotel...the hotel/location may be the problem.Worth a read, IMO: http://en.kioskea.net/forum/affich-37752-c...on-the-internetLouis

Read other 4 answers
RELEVANCY SCORE 186

Hi

Please help i cannot connect to internet explorer!

I am getting the error message

Check the Firewall settings for HTTP port 80, HTTPs port 443 and FTP port 21.

My provider is tiscali and i have done the trouble shooting with them to no avail, Also tried to disable the Norton firewall functions and still didnt connect. My broadband connection is showing excellent between the router and pc with both wireless or with the lead.

I have Spybot and Ad-aware on my computer and norton internet security 2006.

Do i have to clear the Firewall settings for these ports or can anyone help me .... please!

Thanks a million

Angela
 

A:Firewall Settings HTTP (port 80) HTTPS port 443 FTP port 21 error message

Read other 6 answers
RELEVANCY SCORE 180.4

Hi,

I saw this problem listed, but My issue is a bit different and the previous solution didn't work for me.

Please forgive me if any of my posts offend, as I am new to this site. I don't intend to be rude, but my ignorace may anger some. Also forgive the length of the post, I wish to be thorough as to avoid getting possible solutions that I have already tried or are not relavent.

I recently had some repairs done on my computer which involved reformatting my hard drive and when I got it back started having trouble accessing some internet sites. Unlike the previous person's post with this issue i can still access the internet and 95% of sites, but a select (and seemingly random) few give the IE cannot access website error. When I run the networking Diagnostics for Windows XP get the following error:

Check the Firewall settings for the HTTP Port (80), HTTPS port (443), and FTP port (21)

The only firewalls I know of on my computer are Windows and my router (both of which I have disabled) i have also tried Firefox and it craps out at the same exact sites.

In addition to selected sites, some third party programs are having trouble accessing the internet. This includes Nortons Installer (I haven't been able to install my antivirus yet because of this error) and I haven't been abble to register Microsoft office after I installed because it cannot access the internet for ID Key Verification.

I have tried turning off all LAN proxy settings, and power ... Read more

A:Firewall settings for the HTTP Port (80), HTTPS port (443), and FTP port (21)

Read other 8 answers
RELEVANCY SCORE 126

System - Windows XP

A few days ago I noticed some problems in updating my stock prices using Microsoft Money and Quicken. Also, when I logged on to my online bank the site kept on asking me my security questions. It told me to avoid this I should allow cookies to be placed upon my laptop. I'm using Firefox and it is set to allow cookies. As a matter of fact the cookies for this particular bank site were are ready in Firefox. (one does expire in a few days, but it is OK for now).

I asked other users if they were able to download the stock prices using Quicken and Money, and they reported no problem.

Up to this point, the only problems I had were described above. Using Firefox and Microsoft Outlook, I was able to browse the Internet, send and receive e-mails, and perform all normal wireless communication functions – and run World of Warcraft.

I attempted to use Internet Explorer 7 ( that was previously installed on my PC months ago) to hook up to the Internet. For some reason Internet explorer could not hook up. I downloaded the Internet Explorer again and reinstalled. Same result, I could not hook up to the Internet using Internet Explorer. Not that I matter too much about not using Internet Explorer, but I think this is an indication of the same problem that I'm having downloading stock prices, and signing on to my online bank. Using Internet Explorer I ran a network diagnostics check. Basically it told me to check the firewall settings for each HTTP port 80, H... Read more

A:HTTP (80), HTTPS(443) FTP(21) port problem

Read other 16 answers
RELEVANCY SCORE 126

Good morning,

I have read some of the responses but how do I install Firefox if I cannot connect to the internet? Can I "save" it to a disc or flash drive from another computer.
 

A:Port setting for HTTP 80 HTTPS 443 and FTP 21

Read other 9 answers
RELEVANCY SCORE 111.6

Hello! I am trying to forward a port so i can connect to my computer because i want to stream a radio station from computer to my phone.

I'm trying to forward port 88 on my Linksys WRT54G Version 6

I tried that but Boardwave audio streaming server still says it's not open!

Here are some pictures:

I'm using Windows XP Professional 32-Bit
Eset AntiVirus
and using Windows firewall
What am i doing wrong?
Thank you for your help!

Windows firewall screenie:

 

A:Solved: Port forwarding issues, Cannot forward port Please help! Linksys WRT54G

Read other 9 answers
RELEVANCY SCORE 110

Hello, I am an IT Technician for an electric cooperative. I am having a very odd issue that I can not seem to resolve and I am in need of assistance.

We have 4 Dell Latitude notebooks all running XP and we also have some very high end GPS units made by Trimble that we are going to be using to stake out points on a map. Whenever I connection through bluetooth with the GPS I am able to pair but the GPS control software never recognizes it when I chose the COM port assigned to it. Whenever I connect it directly through a cable(serial to usb) it never detects it either.

However this is the odd part, when I test this on my desktop I am able to connect just fine with the exact same method.

Any ideas?

A:[SOLVED] COM port and bluetooth COM port connection issues

Are you aware of any differences in your Desktop and the laptops? Like Service Pack is different, or maybe a BIOS setting?

Jeff

Read other 7 answers
RELEVANCY SCORE 105.2

Hi, Have had a flick through the forum and didn't see anything that could help so here it is.

For some unknown reason my IE says that it can't get the Internet, diagnostics says " windows cannot connect to the Internet using HTTP etc probably caused by firewall settings..." I was using the PC with Internet the day before with no problems and have not changed anything? Even more annoying is the fact that i can still use things like Skype and MSN messenger so i know that the Internet is working just not IE. (i also have FireFox installed also doesn't work). I have had a look at the windows firewall to see if it is blocking it or something, but couldn't see anything out of the ordinary?

My PC is a desktop running XP service pack 3, AMD Sempron 1.8, 2gig ram. with windows firewall and avg 8.0, the Internet is over a LAN

Not really sure what has happened for the Internet not to work but any light on the topic would be most appreciated.

Thanks in advance,

Tom Hilton
 

A:Solved: IE HTTP port being blocked?

Read other 15 answers
RELEVANCY SCORE 105.2

Hi, Have had a flick through the forum and didn't see anything that could help so here it is.

For some unknown reason my IE says that it can't get the Internet, diagnostics says " windows cannot connect to the Internet using HTTP etc probably caused by firewall settings..." I was using the PC with Internet the day before with no problems and have not changed anything? Even more annoying is the fact that i can still use things like Skype and MSN messenger so i know that the Internet is working just not IE. (i also have FireFox installed also doesn't work). I have had a look at the windows firewall to see if it is blocking it or something, but couldn't see anything out of the ordinary?

My PC is a desktop running XP service pack 3, AMD Sempron 1.8, 2gig ram. with windows firewall and avg 8.0, the Internet is over a LAN

Not really sure what has happened for the Internet not to work but any light on the topic would be most appreciated.

Thanks in advance,

Tom Hilton
 

A:Solved: IE HTTP port being blocked?

If "avg 8.0" means the AVG Internet Security that is probably the source of your problem.

You could try these repairs, but they won't fix a firewall issue.

(From a JohnWill post)

TCP/IP stack repair options for use with Windows XP with SP2 or SP3.

Start, Run, CMD, OK to open a command prompt.

Reset WINSOCK entries to installation defaults: netsh winsock reset catalog

Reset TCP/IP stack to installation defaults. netsh int ip reset reset.log

Reboot the machine.
 

Read other 2 answers
RELEVANCY SCORE 102.4

Here is my situation,
I own a Lattitude E7450, and needed to connected two displays to it. I went ahead and bought the Dell E-Port Plus Advanced Port Replicator with USB 3.0, since it has 2 DVI ports on the back. It shows it is compatible with my laptop.
I set up my dock, connected my laptop, as well as both external monitors. Only one monitor shows a duplicated desktop. When I go into the display settings, I cannot see any existence of another external display being connected.
All of my drivers are up to date, restarted laptop many times. Pretty bummed out.
Anyone have any solution/knowledge to this?

Read other answers
RELEVANCY SCORE 102.4

I recently started using the E-Port Plus Advanced Port Replicator with my Latitude E7450, but the headphones are not working. Sound comes from the laptop itself, even when the headphones are plugged into the dock or laptop. The headphones work with other devices, and the laptop works with the headphones when it is not docked.

Read other answers
RELEVANCY SCORE 102.4

Internet Service – Personal Router – Static IP – MAC address of LAN Port or WAN Port

Hello friends,

I have purchased static IP from Local ISP Provider . Problem is that the tech support of local ISP provider is asking em

“Which Port would you like to bind your Static IP”

Also they ask me whats the MAC Address of Router –
Pls see attached screenshot –
As you can see Internet port - 74:44:01:94:E0:79
Whereas LAN Port has mac address - 74:44:01:94:E0:78

Which is router’s mac address?

I have no idea.

I know we have two ports in router (mine is Netgear 300N Model) –
1. WAN (Internet) Port
2. LAN Port
Could anyone really help in explaining me –
1. Which one is router’s mac address
2. Static ip should be binded to LAN or WAN Port

Pls guide Thank You

P.S. I intend to use DVR for CCTV for remote viewing later
 

A:Internet Service – Personal Router – Static IP – MAC address of LAN Port or WAN Port

I Don't know what your talking about directly but I'm willing to try. Can you explain a little better what the isp person is asking you? From the screenshot I know the bottom section is your local connection and the top part is your WAN connection. If that helps any.
 

Read other 2 answers
RELEVANCY SCORE 102.4

Has anyone had any issues with the Precision 7510 only outputting through one DisplayPort output on the E-Port Plus Advanced Port Replicator?Our organization recently started to introduce Precision 7510 units to our employees, and we're finding that they will only output to one single monitor connected via DisplayPort through the E-Port Plus Advanced Port Replicators - even though there are two monitors connected into the two DisplayPort outputs on the E-Port Plus APR. If the monitors are connected via DVI, the Precision 7510 is able to output to both of them through the E-Port Plus APR. We have tried Precision M4800, Latitude E7450, and Latitude E7470 units in these E-Port Plus APR's with two monitors connected into the two DisplayPort outputs - and they all work correctly.The Precision 7510 units have the NVIDIA Quadro M1000M video cards, and the E-Port Plus APR's are connected to either a pair of P2417 monitors or a pair of U2414 monitors.

Read other answers
RELEVANCY SCORE 102.4

1. I would like to change my COM 1 TO COM 3.
Can this be done in the CMOS? or is there a simplier yet effective way that it can be done?

I need your help as soon as possible.

[Edited by Jsimon on 08-16-2001 at 12:13 PM]
 

A:How Do I change Com.port 1 to Com.port 3? My modem is silent. Dual booting problem

What do you mean by changing COM1 to COM3? Do you want to move a device? Reassign IRQs? Physically pick one up off the motherboard and move it?

Your modem sound is usually configured in two places. One is in the Control Panel, and the other is in the Dial-up Networking settings. Adjust the volume there.

Are you running Windows 2000 and Windows 98 on separate paritions (drive letters)? If so, you'll need to use special software to convert the FAT32 file system to NTFS. I believe Parition Magic will allow this without data loss. However, I would never make such a large system change without first backing up data. There is always the chance that everything could get wiped out.
 

Read other 1 answers
RELEVANCY SCORE 102.4

Need some advice a quick as possible.

Windows XP Pro
ofc had a built in serial port go bad, it was hooked to a charicter generator (don't no how to spell charicter) for a tv channel.
Installed a Controller Card with two serail ports PCI Multi I/O Controller Card, it didn't show up in the device manager was having problems getting the driver to work. says to load driver first then put in the pci card. Anyway it wouldn't work. The port that was built in (that went bad was on com 1) When the new card didn't work I used a usb with a serial adaptor and it went in fine and showed up in the divice manager and it said it was working and it started out on com 3, I no each time you plug the adaptor into a different usb port it goes to a different com port. That isn't a problem cause it would stay in the same port. Anyway device manager said it was working we changed the charicter generator to com 3 but it wouldn't work. We no the cables are good. I then got a PCI Card with one serial port instead of two and installed it and it show right up in the device manager and said it was working and I for get what comport it was on but changed it to com 1. that port didn't work either. Finally brought in another windows xp computer and hooked everhthing to it and it works. The xp computer I brought in had no serial port so used the same usb to serial adaptor that we had used and it work the first time. Show up in the device manager just like on the first comp... Read more

Read other answers
RELEVANCY SCORE 102.4

I contacted Lenovo support today and got NO help in answering my question on this T470 Thinkpad. Is the T470 able to support two external monitors at the same time (one) using the HDMI port, (one) using the USB-c port (connected VIA an HDMI adapter lets say) to two 32" LGMA68HY-P 60HZ ISP LED's ( max res 1920 x 1080) that ARENOT 4K displays!!  Man it was like pulling teeth, upside down, in the dark, getting astraight answer from tech support on the issue. It looks like my Pro Dock will be useless in this application. As soon as I plugged in a VGA monitor the HDMI port died. HELP!!

Read other answers
RELEVANCY SCORE 102

So I'm not exactly sure what information I need to share to resolve this issue or know how to fix it. I've been trying to open this port (7198), and no matter what I try it just won't open. I'm not exactly sure how to explain the problem, but the title pretty much says all. If there's any information I need to share please tell me.

Windows 7 Ultimate x64
ISP is CenturyLink
Screenshot by Lightshot
Screenshot by Lightshot

A:I port-forwarded, enabled DMZ, disabled firewall, and port is closed

Welcome to the forum. You covered the ip in the second shot are you using local lan or wan are you trying from outside the lan as you can connect while connected to local lan

Read other 1 answers
RELEVANCY SCORE 102

hi,

Recently i've noticed that port 50 000 is blocked, and bitcomet says it is blocked from using this for listening. Port 50 000 used to be open, and i even forwarded it to my router.

Currently i have no firewalls running, not even the windows firewall. I also have no anti-virus running. I've checked the port forwarding settings on my routers admin page and they appear correct. Does anyone have any ideas how i could unblock this port? Thanks. I am running windows xp home.
 

A:can't unblock port 50000 - needed as listen port for bitcomet

You may not get a whole lot of help here. Please read the TSG rules for the reason.
 

Read other 2 answers
RELEVANCY SCORE 102

i have a router/modem, Thomson ST536 and a router, Netgear WNR 1000. i have a static ip address already and port forward for both router with instructions from portforward.com. yet, when i check if the ports are open using simple port forwarding, only the tcp port is opened. the udp port remains closes. is there something else i must do to open the udp port?
 

A:problem with port forwarding. tcp port gets opened but udp remains closed.

bumpz
 

Read other 1 answers
RELEVANCY SCORE 102

CDMA software requires a COM port to communicate with a cell phone. I'm using HW Virtual Serial Port v3.1.2 (single port, standalone install).

I have a separate modem and router. My Win8.1 PC is hardwired to the modem. Windows firewall is off. Windows Defender is off. Motorola Mobile Drivers Installation 5.9.0 is installed (directly from Moto's website for my phone although Win8 is not listed just Win7. I did not install in Win7 compatibility mode.). My Motorola Droid Razr HD is running stock 4.1.1 ROM. It is booted into BP Tools. WiFi is off. USB Debugging is on. It's connected as MTP (media device). Stay awake is on. Modem, PC, & phone have been rebooted. There are no errors in Device Manager for the Motorola USB Networking Driver.

In IP config, the IPv4 address for the Motorola USB Networking Driver is 192.168.137.1. In HW Virtual Serial Port under Settings tab, I unchecked NVT Enabled. On the Virtual Serial Port tab, I selected Port Name=COM10, IP Address=192.168.137.2, and Port=11008. When I select Create COM, COM10 is created and I can see it in Device Manager but I get a LAN status error (in HW Virtual Serial Port app). So something is not right. In Network & Sharing Center, I see it's an unidentified public network with no internet access (IPv4).

I'm at a loss on how to fix this. Anyone know what I'm missing? Thank you in advance for the help.

Read other answers
RELEVANCY SCORE 102

Hello guys,

I am being more concerned since few days about daily suspicious network traffic in my network about the below.

Looks like UDP port 137 from my private IP contacting destination port 137 to a public IPs (one source to many public destinations). I investigated these traffic by taking into consideration about 50 + offenses and 80% scan results on these PCs didn't find anything suspicious. Rest 30% detected some PUP programs from registry and some adwares, which I believe are not that much suspicious. (Scanned by Malwarebytes and Super anti spyware)

Below is a syslog log I am posting for your reference captured by my SIEM tool sent by Firewall.

<164>%ASA-4-106023: Deny udp src Internal:172.28.169.167/137 dst External:114.80.174.240/137 by access-group "My_CSM_FW_ACL" [0xb292c4f, 0x412e8e2f]

This traffic is happening on a daily basis, and to avoid security issues we have to unnecessarily scan those machines. But is this really a suspicious traffic ? Could someone please help me on this, please. After a brief investigation, if I find something good, I can save a lot of waste work by colleagues sitting abroad scanning the machines.
 

A:Source Port UDP 137(Private) Destination Port UDP 137 (Public). Malware ?

Read other 9 answers
RELEVANCY SCORE 102

I'm doing terabytes of data transferring for months on end, and I was wondering if new hardware allows you to use multiple connections between hardware to transfer data to portable backup disks quicker.

Think Azure with a 5GB fiber line to RAID mirroring bay with only a USB3.0 and an ESATA port (dual banding) on the bay.

Read other answers
RELEVANCY SCORE 102

My laptop had headphones plugged in because I was watching a film, but while I was in another room, my laptop was knocked onto the floor (around 1.5-2 ft drop) landing on the headphones jack, the wire is fine, but the ports completely broken, I can see cracks and its loose and everything

The laptop has Realtek HD audio manager, and in my experience of this program on other desktops I've had, I was able to change what port does what.

My laptop only has a headphones port and a mic port, and I would like to see if I can switch the mic port to be the headphones port because I never use an external mic, however in Realteks audio manager I can't find out how to do this. In pictures I've seen on the internet there is a "Device Advanced Settings" button (as seen in this picture http://www.vistax64.com/attachments...ealtek-hd-audio-driver-version-hd_manager.jpg) but my program doesn't have this.

Do I need to download a newer version of the software? or is it just not possible to change my mic port to be my headphone port? I dont mind if I have to use third party software, I just want it to tide me over till I can get it sent away.

Thanks for suggestions, greatly appretiated
 

A:Realtek HD audio manager, change a mic port to a headphones port?

I doubt very much if this will be possible. The mic and headphone ports are wired directly to the Audio section of the motherboard, there connections cannot be altered.

Your best bet is to get the damaged port repaired.
 

Read other 13 answers
RELEVANCY SCORE 102

As mentioned in the title I have both pieces of hardware.  I also just purchased a third Dell U2414H LCD monitor.  I am trying to connect all 3 via display port.  However it seems that all I can do is 2 monitors?  When I try to daisychain them I got 2 monitors mirroring each other and one through HDMI off the laptop.

Is this a physical limitation of the replicator?  Is there a firmware update somewhere?

A:Dell Latitude E6520 & E-Port Plus 2 - Display port issue

The E6520 comes with Intel HD Graphics 3000.  The specs for that GPU are buried in the specs for the CPU itself, but if you go to ark.intel.com and look up your CPU, then scroll down to the graphics section and verify that it shows Intel HD Graphics 3000, you'll find that that GPU only supports 2 independent displays, which is why you see mirroring.  More recent Intel GPUs do indeed support 3 displays, but no Intel GPUs to my knowledge yet support 4.
If your E6520 has the NVIDIA discrete GPU, I can't find any information on NVIDIA's site about maximum number of supported displays, but based on your experience I would assume it's 2 unless indicated otherwise.

Read other 1 answers
RELEVANCY SCORE 102

Hey Guys,

I have been messing around with Apache from (XAMPP) on my Windows computer. I know that it is not secure, but I am just testing it for right now (for fun).

I am behind a Linksys WRT54g router. I can easily access the apache server from internally (locally), and in order for me to be able to access it externally (external IP in address bar), I have to port forward in my router.

So, I port forwarded port 80 and everything worked fine. I just had a question about this.

Since most internet (HTTP) traffic is served through 80, and I just port forwarded 80 to one computer, how do the other computers on my network still have access to the net. Don't get me wrong, it's awesome that this works, but I would just like to know how. Theoretically, wouldn't all the traffic that is coming through 80 be routed to that one computer?

Can someone explain this to me?

Also, when people use Apache to host sites, do they usually keep the apache ServerName (in httpd.conf) at localhost, or do they change it to a different IP? I would imagine they would keep it at localhost, so what would be the reason for changing that to a different IP?

Thanks!
 

A:Question about port forwarding port 80 (for apache) and a couple other questions

Anyone have any ideas? Thanks.
 

Read other 1 answers
RELEVANCY SCORE 102

I have dual monitors......my primary display monitor is a Chimei CMV223D
My secondary display monitor is an Acer AL1916W.

My graphics card is an HD ATI Radeon 5800.

PROBLEM:

My primary display monitor which usually has a display resolution of 1680x1050 is currently stuck on 640x480 and in the property settings it won't let me change the resolution. The cable running from the Graphics card is an HDMI cable with a HDMI/DVI converter. I have also tried using the DVI port of the video card to the DVI port of the PC which comes up with same problem. Using a DVI/VGA converter and a VGA cable the VGA port on the monitor works fine!!! SOOOO long story short there is definitely something going on with the monitors DVI port.........

This randomly occurred overnight and is driving me insane to know what I need to fix. I have used different cables and to no such luck. My secondary monitor is just humming away just fine! But I really need my primary display.

I've uninstalled and reinstalled video drivers for the graphics card which is the Catalyst control centre suite and all monitor drivers appear to be up to date.

WHY oh why is my monitor locked at this resolution!!??? How to fix please help!!!

A:DVI port on monitor is stuck res of 640x480 VGA port works fine

Never mind!!!!

SOLVED CHECK THIS!!!!!

Force DVI/HDMI resolutions and refresh rates

Read other 1 answers
RELEVANCY SCORE 101.6

Hello,
I have trouble as described in the topic,
I have two most old laptop models, Dell Precision M6300 & Dell Latitude D630.
When laptops is docked to replicator potr dock stations D/APR (PR01X) or D/DOCK (PD01X) - bigger one model with DVD port,

headphone jack port not working under Windows 10 Pro x64 installed on both laptops.

On M6300 previously was installed Windows 7 Ultimate and on D630 was Windows 8.1.
On Dell  M6300 on Win 7 Ult. headphone jack port worked properly.
On Dell D630 on Win 8.1 I'm not sure due I do not used this on it (more years ago when it was on Win XP headphone jack port worked properly)
So when Ms start delivering updates do Win 10, I did it on doth laptops, everything on both models working fine, but only this headphone jack port in D/APR (PR01X) or D/DOCK (PD01X) wouldn't like to work when I'm dockind Dell M6300 (D630 I docked only
for test if on this one jack port will work or not) but not working too like on M6300.
So loks like drivers whih was made oryginally for Win Vista x64 ale which was workable for Windows 7 64b wouldn't like to work on Windows 10.
Maybe You have some tips what to do with this to press them to work?

Greets
PitPuma

Read other answers
RELEVANCY SCORE 100.8

I'm looking for two drivers, and have run into a bit os a wall on the Lenovo driver website. - PCI Simple Communicator Port- PCI Serial Port Computer: Thinkcenter M58 8910 ARU.   Windows 7, 64 bit. I dropped a new hard drive and a PCI card into this machine, and everything looks good except that the PCI card is not recognized.  I see similar posts here, but none with solutions that work for my exact situation.  I'm not a tech guru, just a semi-educated user.  8^)  Any help is greatly appreciated! Thanks,Bob 













Solved!

Go to Solution.

A:PCI Simple Communicator Port and PCI Serial Port drivers for M58

I have the same problem with M58P and Windows 8.1_x64.- http://support.lenovo.com/br/pt/products/desktops-and-all-in-ones/thinkcentre-m-series-desktops/thin...On page no information about the PCI Serial Port driver.Any suggestion?

Read other 4 answers
RELEVANCY SCORE 100.8

Hi 
I have Dell 6430s and I have 2 port USB on Laptop. USB port behind work ok (detect, power and connect), but on the right side looks is corrupt by Dell/Windows software- detect plug, give power to connected device, but i cant use this device - mouse, pendrive or anything else.
Windows 7 64 bits Home premium
DELL 6430s
USB SOFT: intel extensible host controller 1.0.0.194

I install/unistall all drivers from DELL Site, and any changes all devides connected by side USB as unknown devices.

Read other answers
RELEVANCY SCORE 100.8

1. Is this a wired or wireless connection issue?
wireless
2. Who is your Internet Service Provider (ISP)?
Charter

3. What type of Broadband connection are you using?
Cable

4. What is the exact Make and Model of your Modem, Router or Modem/Router Combo
Netgear WNDR3800, Cisco DPC3008

5. What is the Name of the Anti-Virus, Security or Firewall Software
comodo firewall

A:router not passing port scan after opening port

Have you tried a different port to see if that port is being blocked by your ISP?

I also see that your parsing TCP to UDP, probably doesn't make a difference to the port being open or closed but it might be better to set them both the same or set to Any.

Another problem you may encounter is your IP may change, most ISP's like to change your IP every so often so you may have to set up a DDNS with a hostname in order to access the services you want remotely.

Read other 9 answers
RELEVANCY SCORE 100.8

so i opened my port 25565 (or so i thought) went to test to see if its open on multiple sites and....all of them say its closed.

A:router not passing port scan after opening port

Start the application you opened the port for and then test the port, it should report it as opened.

Read other 31 answers
RELEVANCY SCORE 100.8

Hi,

I run the Vulnerability scanner yesterday GFILanGuard Network Security Scanner and it shows that on port 81 there is a backdoor Asylum. But I do not know how to see which application is actually using that port. I have used the TCP view but it did not show any kind of application running on port 81, at the same time when i tenet the port 81 I observed that its responding and there is some activity going on that port

I have used another tool named Advance Admin tool and it shows the information as follows:

Port Protocol Description Possible Trojan

81 TCP HOST2 Name Server RemoConChubo
Can you please help me how I can be sure what is actually going on this port. I mean the exact application which is listening on this port.
 

A:Asylum port 81.How to check which application is running on a port

You may want to try Port Explorer, it will identify which program is using the port:

http://www.diamondcs.com.au/portexplorer/
 

Read other 1 answers
RELEVANCY SCORE 100.8

Sir i have dell gx620 desktop optiplex whenever i use to LPT or COM port for programming purpose its shown an error that  I/O SYSTEM SERVICE IS PRESENT BUT THE DRIVER CANNOT BE CONNECTED TO please solve my problem thanks in advance

Read other answers
RELEVANCY SCORE 100.8

Hi,

I have been using an DSL Siemens speedstream 6520 router at home. I usually carry out some R&D by placing servers behind the router. I access the services on each of the servers from the ouside using port forwarding and it has been working fine for http, ftp, RDP, any user defined ports etc but in the case of port 25 SMTP its not working at all. I have checked the port on the local lan and I am able to telnet to that server but from the outside only on this port 25 I am not able to telnet. But If i were to change the SMTP port number from 25 to any other port like 24 or 26, I am able to telnet from the outide. Is there any way i can make SMTP port 25 to work and access the same from the outside.

Regards
Rajesh
 

A:SpeedStream 6520 DSL Router - Port forwarding for port 25

Is it possible that port 25 has been blocked by your ISP? This is a pretty common thing for ISP's to do as a SPAM prevention measure.

As you can see, there are quite a few ISP's blocking port 25 on this list.
 

Read other 1 answers
RELEVANCY SCORE 99.2

After switching ISP recently, I can no longer get my computer to work with Wake On Lan.
I had it set up fine with the port forwarding of the old router, but can't work out the settings on the new one.. I know that this is more than likely going to be an extremely easy question to answer for anyone who knows much about networking, but I don't, and don't really know what I'm doing with it..

So, I've taken screenshots of the settings that worked for the old router, and a screeny of the settings page for the new router.. Can someone please tell me what I need to put in the new router's settings and where?

So, here are the old settings which worked:

Note that the appropriate entry is "iWOL."

And the new settings screen I need to fill in:
Again, I'm guessing this is a really simple question for anyone with any sort of knowledge of this stuff..
 

A:Solved: Port forwarding settings for new router (what's different from my old one?)

Read other 13 answers
RELEVANCY SCORE 99.2

I have a PC running Internet Explorer and Windows XP. I use the free AVG V9 Security System I can view Youtube, bbc iplayer & itv player with no problems. I also have purchased espnplayer which allows me to watch NHL games. Live games use Port443 and this is OK, but when selecting On Demand, which allows me to watch archived games and uses Port 1935, I am plagued with interruptions due to buffering,and the games are unwatchable. My download speed is over 3kb, & the bitrate they run at is only 800. I contacted the ESPN technical support team, & they said there is a problem with my Port 1935 & asked can I access Port 1935 in my firewall/router to enable it. Can anyone advise how to do this ?
 

A:Solved: AVG 9 Free version : Port Settings

windows firewall exception add port
 

Read other 2 answers
RELEVANCY SCORE 99.2

Hello,

I just got a new ISP. They are blocking port 80. This means I cannot access my websites being hosting on my server running out of my home network.

So if I go to www.mm-theory.com, which I used to be able to do with my previous provider, it tells me: the site cannot be reached. I'm trying to open port 5000 so that I can get to my site by typing www.mm-theory.com:5000, but that doesn't seem to be working either.

I'm wondering if anyone can help me troubleshoot the issue.

I have the domain mm-theory.com registered with register.com. When I log into my account with them, this is what I have set for the IPv4 and IPv6 addresses:

The IPv6 address is left blank because Telus (my current ISP) changes it on a daily basis. Technical support at register.com told me I could leave it blank and only have the IPv4 address, so I did that.

When I go to whatismyip.com, this is what I see:

When I go onto my Windows Server 2003, this is what I get when I type ipconfig /all:

...and I see this when I open the properties for mm-theory.com in IIS on my my server:

This is what I have set for port forwarding on my router:

Does anyone know what might be going wrong? Thanks.

EDIT: I am not able to get the screen captures to show up. You can see them here:

https://www.computerforum.com/threads/port-forwarding-to-port-5000-not-working.243989/
 

Read other answers
RELEVANCY SCORE 99.2

Those 2 are listed in device manager, do i really need them, ?

I don't have a printer install, so i guess its safe to disable the ECP printer, but what about the communications port(com 1)?
 

A:Communications port (COM1) and ECP Printer Port

Hi

why disable them, they dont use resources or memory they just exist.

If you want to get rid of them go into the BIOS and disable them in there.
 

Read other 1 answers
RELEVANCY SCORE 99.2

I have an amateur radio program installed on my desktop Dell PC runnning Windows 7. The program is correctly installed but when I try to communicate using the Internet I hear no sound from my speakers. I am connected to the other station but still no sound.
I get a message saying "cannot open serial port COM1. I would like to know how to convert a USB port to a Serial port. Please advise.
Thank you

Read other answers
RELEVANCY SCORE 99.2

I just got gmod and when I go to make a listen server with create multiplayer game I follow the exact instructions my friend used to get his server up and for some reason no one can join my server. They say that it is not responding. I was told I had to forward ports and when I try I get an error. Please help me. Thanks
 

A:Port forwarding port overlap occured please help.

Hi, I also got the same problem may someone help?
 

Read other 3 answers
RELEVANCY SCORE 99.2

Hey all!

At Uni at the moment, and although they allow POP3 access, they seemed to have blocked port 25 (SMTP)... and it's alternative port!

Is there anything I can do to be able to send using my mac mail app? It's much easier to do this for work, rather than having to keep logging into webmail and what not.

Please help!
 

A:Sending e-mail when port 25... and the other port, is blocked?

Any ideas, anyone?
 

Read other 2 answers
RELEVANCY SCORE 99.2

Hi.

I was tired when 50th result in google named "port forwarding" was actually question how to open port.

To be specific, I would like windows 7 to do the same what this program does. Which means forward port...
NOT fowarding port on my router
NOT opening port(allow connections) in windows rules
YES forward port to other destination on X port.
Thanks in advance!

--
Mike

A:Port forwarding(redirecting), NOT(!) port opening

Honestly no one knows?

Maybe it's just impossible?

Read other 7 answers
RELEVANCY SCORE 99.2

I have an old DOS program that prints a graphic to LPT1. My present BIY computer doesn't have a parallel port, just USB ports. Is there any way that I can "redirect" the DOS program to the present printer USB port?

Thanks much.

...robert

A:How to redirect parallel port to USB port to print?

Hi Robert !

You could share the printer then use the following command line :
net use lpt1 \\pserver\laser1 /persistent:yes
Replacing pserver by the name of the computer to which the printer is hooked and laser1 by the name of the printer.

See this article from MS support :
http://support.microsoft.com/kb/314499/en-us

Read other 2 answers