Over 1 million tech questions and answers.

SMA Connector and Reverse SMA connector question

Q: SMA Connector and Reverse SMA connector question

Hi there. Please view this item
http://www.newegg.com/Product/Product.aspx?Item=N82E16833127063

I am confused whether or not the antenna or cable will screw onto my wireless adapter card.

My wireless Adapter card has a SMA connector on it with the screw wedges on the outside rather than inside with a pin in the middle.

Heres a photo of a similar SMA connector - http://content.answers.com/main/content/wp/en-commons/thumb/9/90/200px-Gniazdo_RPSMA.jpg

The brand of the network adapter is the same as the brand of the antenna they are both D Link so youd think they would fit.
will the antenna or cable screw onto that?

thanks, jordan

Read other answers
RELEVANCY SCORE 200
Preferred Solution: SMA Connector and Reverse SMA connector question

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 86

Hi. I am new to building computers and have a question on fans. My case has three fans. Two of my fans have both pin connectors and molex connector attached together. How do I power the fans ?- do I need both connections?
thanks
 

A:Fans with molex connector and pin connector

The 3pin connectors are to plug directly in to the motherboard......if your motherboard does not have the 3pin connectors then plug the molex into the power supply
 

Read other 1 answers
RELEVANCY SCORE 80.4

Yesterday my PC refused to start when I removed my graphics card - hitting the Power On button doesn't start the system running at all

So I did several things. I checked the 24 pin power connector from the PSU to the motherboard and tried to re-fit it again. I also removed the Power Switch connector that connects the switch on the front panel to the motherboard, and re-plugged it in. After that, I managed to boot up the system

I'm just asking out of curiosity, because I suspect that it could have been the loose power switch connector, but what will happen if the 24-pin connector is not plugged in properly? Will the system still start up?
 

A:Question regarding 24-pin connector

Read other 16 answers
RELEVANCY SCORE 80.4

I can re-wire the connector on the end of the wire if necessary.

Question is, which connections ARE necessary???

Would it be easier to buy a connector at the supply store to splice onto the power button wire?

Thanks
 

A:connector question w/pic

Read other 13 answers
RELEVANCY SCORE 79.6

Hi All,
Have a T30 and an older Auto adaptor from a different laptop. Volts & amps are correct for the adaptor but it has the wrong connector plug for feeding the laptop. I want to buy one and solder it in place but not sure about what part number it is (assuming they make a generic one). I tried RadioShack with no success.
Suggestions anyone?
LC
 

Read other answers
RELEVANCY SCORE 79.6

Stupid question, but do you just snap off the little bendy parts?
 

A:Question about MB connector plates

Read other 9 answers
RELEVANCY SCORE 79.6

Hey, am new to upgrading/building computers so please bare with me.

I have a pretty simple question that I cant seem to find an answer to.

Does the 20+4-pin connector on a powersupply work with both a 20-pin and 24-pin mobo?

Thanks in advance.
 

A:PSU Main Connector Question

In short, yup!!!!

Hope that helps!!!!
 

Read other 4 answers
RELEVANCY SCORE 79.6

I'm working on a HP laptop, and repaired a dc input jack. That restored power to the laptop. Now in reassembly I'm having trouble reconnecting the zif connectors to the motherboard.

Any suggestions or help would be appreciated.
 

A:Solved: Zif connector question

I finally figured out how to release the zif socket, and insert the cable[/I]
 

Read other 1 answers
RELEVANCY SCORE 79.6

Aloha,
I want to make a USB to USB data connector to connect two computers together to transfer data. All the one's that I saw , had a plastic bulge in the middle of the cable. Is that a splice point or does it have some electronics in it? I know that the USB has 4 contacts being that pin 1 is + batt, pin 2 & 3 are the data xmt and rcv, and pin 4 is the - batt. I would think that all that is needed to make your own transfer data cable is to reverse the xmt and rcv wires in the cable. Any thought to this?

Mahalo,
doogdoog
 

A:DIY USB data connector question

Read other 7 answers
RELEVANCY SCORE 79.6

Will a 1.5gb/s connector work with a 3gb/s slot or the other way around?
 

A:Sata connector question

When you say "connector" do you mean the data cable? If so, yes they will work for all standards of SATA. Some older SATA cables do not have the metal clips that hold them in, but they will still work.
 

Read other 3 answers
RELEVANCY SCORE 79.2

I am working on a project and I have a Laptop monitor here that has a 40 pin LCD connector that I am trying to convert to HDMI to plug into an xbox 360. I have gone and looked for an 40 pin LCD to HDMI converter but all I could find was an 40 pin TTL to HDMI. Will this work? https://www.adafruit.com/products/2...2KF8Y_EOnrMVziicEfgwarUPZqSbe_j7LMRoCMFXw_wcB
 

A:Difference between 40 pin LCD connector and 40 TTL connector

Read other 6 answers
RELEVANCY SCORE 79.2

I am wanting to install a new video card. It has a VGA and a DVI output on it. The old card has only a EVC connector on it. From there it goes to a Y cable with 2 CRT monitors (VGA connections) coming off of it.

My question is. Can I use a DVI to VGA adaptor and hook both monitors to the new video card and do away with the T cable?

Thanks Bill
 

A:Can I change from a EVC connector to a VGA connector?

Most definitely. You can down convert form DVI to VGA, but not the other way around (inexpensively, anyway)
 

Read other 1 answers
RELEVANCY SCORE 78.8

Hello all! I don't know if I should be posting this here or in another area, but here goes:

I have a Dell Vostro 2510 Laptop with a slot DVD burner. Recently, my 3yo decided it was a great place to put coins and one got lodged in there good and tight. I finally decided to take apart the laptop to get the drive out and clear it of any coins. Now the drive seems to work.

However, I broke the little piece that holds the keyboard ribbon cable in place in it's connector. It's a little black piece that lifts up to release the cable and locks down to hold it in place. The fixed piece on the system board seem fine, but I gather I need to order a piece like this, which I gather would contain the lock down piece. Unfortunately, I do not know what it is called or where I can order it from. Can you help??
 

A:Keyboard Ribbon Connector Question

Read other 10 answers
RELEVANCY SCORE 78.8

hi

is the square p4 atx12v power connector really essential? i have read that it's mandatory for pentium 4 systems but i have a sony vaio that's a p4 2.66 ghz and it doesnt have the square 12v connector hookedup (i just discovered this as i 'm taking it apart to clean the inside).

thanks
 

A:question about the p4 atx12v power connector

Read other 7 answers
RELEVANCY SCORE 78.8

Hi there! I've checked the forums and I'm not sure where this topic would fit so I thought this forum was most fitting? If not, please move it of course but my question is related to a broken power connector on my laptop.

I know this is the problem, as I have tried 3 different working charger/adapters and neither of them work, plus I heard a snap when I plugged it in a few days ago, prior to me noticing that a) the cord does not go into the jack as smoothly as normal and the battery is not charging when it is plugged in. Also, my laptop is fairly new.

It says 'plugged in, not charging' and is currently at 4%. I keep it very still on a table so to not let it go lower but I was wondering what would happen if the battery went to 0%. At the moment, the message I receive when I unplug the laptop while using it, is that if I do not find a power source, the laptop will go into hibernation mode. As soon as I plug it in, it returns to normal mode, only still 'not charging.' I must bring my laptop out to work on it and I am concerned if it gets down to 0% - will it still work the same at that level if plugged in, even if not charging?

I hope my question is clear. If not, please ask any questions you may have. I cannot afford to replace the connector jack at the moment and definitely cannot afford to lose use of my laptop.

Thanks so much!
Jessica
 

A:Question about laptop power connector

Read other 8 answers
RELEVANCY SCORE 78.8

Hello,  recently I have purchased an XW9400 motherboard, a -005 AS#, and I have been reading a lot on various PC sites about issues using industry standard fan/heatsink combos with the CPUs. Can someone please give me the correct pinouts for the CPU0/CPU1 connectors, P70/P71?  At first, I thought I'd splurge and buy a couple of the fan/heatsink combos from HP, but the $330+ pricetag nearly gave me an aneurism.  I'm a disabled veteran and don't have much money to spare.  I build multi-CPU PCs as a hobby and therapy.  I have two new Dynatron fan/heatsink assemblies which are industry standard, but I neither want to burn them up nor damage the motherboard in any way. Also the power supply I am using, a Sentey 725W, does not have an 8-pin plug that will work for P3.  It does have a 6-pin PCI plug that fits electrically with what is there and the voltage requirements.  My question is whether pins 3-4 and 6-8 are in parallel for current carrying purposes and are supplying power to the exact same points on CPU1.  If this is the case, I feel the 6-pin plus will handle the demands of the board admirably. Thanks in advance for any help anyone can offer in this matter! RR

Read other answers
RELEVANCY SCORE 78.8

I just picked up a Neoview 17" LCD monitor. It has LOTS of connections ... but none of them are VGA.

It looks like the main video connector is a D shaped and has three rows of 8 pins in it .. PLUS it has three more rows off to the side .. the top and bottom are two pins each and the middle is a flat blade .. I've never seen one of these before and am "sorta" lost.

It came with a male/male cable to match the connector mentioned above. Also, there's a male (connector above) to VGA female adaptor....... but to use the adapter to a VGA video card, I'd need a cable. Is there such a thing as a VGA cable ? ... Any monitor I've ever seen had the cable permanently attached to it.

Anxiously awaiting your respones ..... in the meantime, I'm gonna hook the monitor up to a VCR and see how the video looks (it has RCA video and audio inputs!).
 

A:LCD Monitor Cable/connector question

I'm assuming it has a DVI connection. Flat panels use digital signals. A lot of cheaper/older ones converted analog to digital signals because video cards converted digital to analog. New cards don't all do that. They have a DVI out for digital displays.

Is there such a thing as a vga cable: yes. Is it what you need: i'm not sure. From the sounds of it you have a convertor like a DVI-to-VGA that I've seen before included in cards that have DVI out but reversed. If so you should be able to get a standard 15 pin VGA extension that attaches to the adaptor and to the video card.
 

Read other 2 answers
RELEVANCY SCORE 78.8

Could someone please explain why the thin flat power-connector that mates with an internal SATA HDD has about 12 contacts when it has only four wire-leads from the power source?
 

A:Solved: SATA connector question

No.
Well actually the original idea was to have lots of monitoring signals, but that got changed.
Most of the contacts are for power at several voltages, and several are needed to carry the current because the design is more flimsy than the older power plugs.
 

Read other 2 answers
RELEVANCY SCORE 78.8

I have a problem. I have two different types of moniters. GDM-20e20 and GDM-20d10 SUN 20" Moniters. They both need the 13W3F to VGAM Adapter. I have an adapter with the serial #: 530-2917-01. It works great on the GDM-20e20 Moniter, but the GDM-20d10 moniter just blinks it's light when I hook it up (VGA image never comes up). I know that it is not a broken moniter because I tried two of the GDM-20d10 moniters on the same connector and it still does the same thing. Does anyone know any good place to buy some connectors for these moniters? Some connectors that are possibly cheap and will work with the GDM-20d10 20" moniters? Thanks!

Matt
 

A:Sun Moniter Connector Conversion Question??

http://www.pccables.com/cgi-bin/ord...no=00636&search=GDM&rsite=pccables.com&rcode=
 

Read other 2 answers
RELEVANCY SCORE 78.8

Hi all,
Just a quick question.
I am using an asus P5ND2-Sli Deluxe Motherboard and I am having difficulty deciphering the system panel connector diagram in the manual relative to the cables that came with my case.

The 20-pin panel is apparently color co-ordinated and it 'should' be easy to match them up, however the cables that came with the case seem to be a different scheme. Eg, on the board the pins for the Power cable are a light green, whereas the Power connector has one green and one white cable coming out of it.

Is there a specific system to this? eg white is ground, or the labels on the connectors have to face a specific way?
Is it possible to damage the motherboard by incorrectly connecting the cables?
If anyone could provide me with any advice or perhaps a link to a diagram from somewhere that would be great
 

A:System panel connector question

Read other 6 answers
RELEVANCY SCORE 78.8

Hi there,

I seem to have a non-standard connector type on my SSD (THNSNC128GMLJ). I'm now concerned that I will not be able to upgrade my SSD for a larger capacity. Does anyone know anything about Toshiba using anything other than the standard SATA family of connectors on their SSD's?

This is pretty annoying as the laptop was advertised as follows - "Hard Drive - 128 GB Solid State Drive - Serial ATA-150" I'm no expert but the connector on my SSD does not look anything like the SATA connectors I've seen before.

Any help or information would be most appreciated.

A:Portege R700-155 - SSD Connector question

i believe the SSD's as standard were a different ribbon connector to the standard HDD's in the R700 series, however i also think (but don't quote me) that the actual connector for the ribbon on the motherboard is the same. so in order to fit a new SSD to the one you have you need to get hold of the HDD style ribbon from a lower spec R700

my R700-184 (european spec) was highest spec without SSD and it has normal SATA connector on the end of the ribbon. fitted an OCZ vertex 2 lovely :-)

Read other 19 answers
RELEVANCY SCORE 78.8

 I have Pavilion 15-B011NR laptop for my 17 yo son.  He dropped it and now the power cord plug does not seat in the laptop connector as it should.  I removed the cover and found the plastic tab holding the DC connector to the laptop shell was broken.  As a result, the connector slides back/forth and prevents the plug from seating in the connector.  (yes my son dropped the laptop)The power connector works so that is not needed. Is there a way to buy the plastic bracket that holds the power connector to the laptop case?Side note: DC Power Conector part number is 701682-001 (per the HP Partsurfer)There are no pictures as to what the entire DC power connector ships with

Read other answers
RELEVANCY SCORE 78

I seem to have this problem frequently - all of a sudden, the AC power chord won't fit into my laptop and I have to replace it....Is there a power chord that is more sturdy and whose plug-in won't easily break off or cease working?

Thanks for any help.

Chip
 

A:Question re Laptop Cable Connector Not Working

Read other 7 answers
RELEVANCY SCORE 78

I am thinking about ordering the RJ45 Extension Connector Generation 2 for a 6th generation X1 Carbon.Does this adapter support gigabit ethernet? 

A:Question - RJ45 Extension Connector Generation 2

Internet advertising and marketing in Tangerine Regional Carolina offers plenty of opportunities suitable for local businesses to add with householders and consumers. While it is doing take substantially effort to make a superior online appeal practise can usually get expedited just by enlisting help while in the locals. [url=http://www.businesscounty.org]businesscounty[/url]

Read other 1 answers
RELEVANCY SCORE 75.6

I am fixing a Dell 5100 desktop with a SATA hd and have an extra SATA connector in the frame. I want to use her old hd as a slave or secondary drive, but it is a molex connector...how can I hook it up?
Thanks
 

A:Solved: Question about using a old molex hd as a slave drive in a SATA connector syst

Read other 7 answers
RELEVANCY SCORE 64

Hi, I need to buy a connecting USB to connect the S140u Portable Screen to my HP Elitebook. I currently have the old connector which has two USB connectors at the end but my Elitebook doesn't have anywhere to connect the two.Any ideas if HP sell this separately - i've looked under the S140u "Accessories" section but they dont seem to sell it separately. Thanks in advance,Emma

Read other answers
RELEVANCY SCORE 64

Like many, I have CD-ROM problems, but mine is a little unusual. I have a 58x vanilla CD-ROM chained as a slave to a master Plextor 708-A DVD writer. Both are on the secondary IDE connector of an Asus P5GD1 board. This is the one with the RAID connector possibility on the secondary connector but the default on the Secondary connector is to IDE and I've left it that way. The two hard drives are chained master/slave to the primary and are working fine. Windows XP SP2, P4 3 Ghz, 1 GB RAM.

The CD-ROM shows up in Device Manager but freezes when I've tried to read a CD. The DVD writer works fine and will show anything when there is a disc in there. I've tried the usual workarounds, elminating the Upper and Lower Filters, removing the drives from Device Manager, zilch. In Event Manager, I keep showing Event 51 (paging error) and 11 (controller error) trying to use the CD-ROM. The Event 11 explanation says a "faulty cable" is the problem but I've changed cables twice.

What I'm thinking is that I currently have an 80-pin cable hooked up to the two optical drives and the Asus Secondary Connector which is made for an Ultra ATA 133/100/66 port and the motherboard asks for an Ultra ATA signal cable. Should that cable be a 40-pin connector rather than the 80-pin connector? Would that allow the CD-ROM to be read and will the DVD still work?

Thanks for any help here,

Neal Lavon
Takoma Park, MD
USA
 

A:40 vs 80-pin Connector

Read other 6 answers
RELEVANCY SCORE 64

I have an ABIT AX5 motherboard and am running Windows 98. The keyboard connector (PS/2) no longer works. I am wondering is there and can I connect a USB keyboard and have it work? I am in stationed in (US Army)Korea and don't have access to a repair shop (and can't afford a new motherboard).

Thanks
Dave
 

A:USB connector HELP!!!

Don't know why not, there are a lot of usb keyboards available. The only down side would be no keyboard in dos mode. Windows should be fine though. Here is a list of usb keyboards etc
http://www.usbworkshop.com/products/keyboardlist/subcat0/
 

Read other 1 answers
RELEVANCY SCORE 64

I have a Intel PII 350, 8.6 Gig HD and 128 MB of Ram. I am using Windows 2000 as the OS. I was trying to install a USB modem on my computer when I noticed that my USB connector wasn't installed properly. I uninstalled the hardware and re-installed it using the old and new drivers but still it wasn't working. When I went to the trouble shooting tab, it set that USB connecter not starting up. Would you be able to tell me what the problem is.
 

A:USB Connector

Enter the bios and make sure usb is enabled, quite possible it's not if your not using anyother usb devices.
 

Read other 3 answers
RELEVANCY SCORE 64

Hi, I have purchased a OCZ Stealth Xtream 500W PSU (model: OCZ500SXS2), I have also choosen a motherboard (Gigabyte GA-890GPA-UD3H 890GX Socket AM3 HDMI DVI VGA.. | Ebuyer.com) but this motherboard has a 8 pin CPU power connector and on this PSU I only see a 4 pin CPU power connector (P3):? I need to know if I purchase this motherboard will it be able to work with the PSU and power up an AMD Phenom II X6 1075T 3GHz Socket AM3 125W 9MB Cache.. | Ebuyer.com
Also read on a website:

"You can plug a 4 pin 12V cable into an 8 pin motherboard and it will sometimes work properly but other times it won't work at all or will burn/melt the connector."

Thanks in advance for the help.

A:PSU Connector help

Take look here:

Kustom PCs 4pin P4 12v to 8pin EPS Connector



8Pin 12V to 4Pin Power Cable : Internal Case Cables : Maplin

Read other 5 answers
RELEVANCY SCORE 64

I am about to put together a new (simple) PC. The MB is a Biostar 6200, the processor is an AMD Sempron 2800+. The MB has a socket, which the book says allows 12v to be connected to the processor (??????). A modern PSU has such a 4 pin connector, two black, two yellow wires i.e. 12 volts. I want to use an old PSU which doesn't have the 4 pin connector. Is it necessary?
 

A:4 pin 12v PSU connector

Read other 15 answers
RELEVANCY SCORE 64

Probably a simple answer I know.. PC stopped working, Checked power supply it was fine, unplugged everything except the p4 connector, still nothing. Ha unplugged the p4 connector now things come on. The question..Bad motherboard or cpu?

Thank-you in advance
 

Read other answers
RELEVANCY SCORE 64

Hello, I'm about to purchase a GTS450 card and noticed it required one 6 pin pci-e power connector. However I only have an 8 pin pci-e power connector. Would this still work?
 

A:6 pin pci-e connector

Might check your 8 pin connector to see if it is a 6+2.
That means that 2 pins may be removable to allow
use as a 6 pin connector.
Check the cards package content list to see if it includes
a 4 pin molex to 6 pin pci express adapter.
If not,you can buy one pretty cheap.
http://www.newegg.com/Product/Product.aspx?Item=N82E16812887001&cm_re=molex_pci_express-_-12-887-001-_-Product
 

Read other 1 answers
RELEVANCY SCORE 64

Please help.
my question:While implementing any standard bus architecture like ISA ,EISA..in our own designs ,is there any standard to be followed while selecting bus Connectors (physical) or we can use any type of connector?
 

A:ISA bus connector

ISA .. WoW that brings back memories
In theory you should follow the standard set for ISA to avoid interconnectivity problems. In practice , well if the system will be used mainly by you, then it shouldn't matter since you might be able to get away from connection problems by manufacturing your own connectors
 

Read other 1 answers
RELEVANCY SCORE 64

Hi. If I would get a PS2 to USB connector for my laptop, could I just connect a keyboard or would I have to connect both a mouse and keyboard?

Thanks.
 

A:PS2 to USB Connector

You can just connect the keyboard, the laptop mouse will still function.
 

Read other 3 answers
RELEVANCY SCORE 64

Hi, I acquired (for free) a dell Dimension E510 and it it does boot up. When I power it up, it makes a terrible beeping/whining noise and then powers down. The power indicator light starts to blink and I can't power up the computer again unless I hold the power button down for 10 seconds or I unplug the power and then push the power button again. If I disconnect the square 4 pin connector from the mobo, it does not make the beeping sound and the power indicator light stays solidly lit, Regarding the PSU 4 pin connector, I am getting 11.95 volts on each yellow wire (with a volt meter to the chassis) and (minus) - 2 volts on the black wires.
I have tried removing and replacing the cmos battery, disconnecting the modem card, hard dive. Its only when I unplug the 4-pin connector that the computer does not beep and turn off

What does the 4 pin connector supply power to?
Does it sound like the 4 pin connector is good?
Could the mobo be faulty?

Thanks, Bill
 

A:Bad PSU? What is the PSU 4-pin connector?

The 4Pin power connector powers the CPU

But it sounds as though you haven't plugged the power into the Video Card (some 3D Video cards have this, maybe yours?)
 

Read other 3 answers
RELEVANCY SCORE 64

I'm buying a new PC tomorrow, but I want to keep my 250GB IDE drive in addition to a 250GB SATA drive. The motherboard I'm purchasing has one IDE connector, but I have two IDE devices that I want to connect. There's the 250GB hard drive, and my DVD burner. Will that be possible using just the one connector? I'm not sure what they mean by that, since I know IDE cables sort of have two cables in one.
 

A:Can I do this with one IDE connector?

If the cable only has one connector then you can buy one with 2 connectors on it.

If they mean that you only have one IDE connector on the board then might be a little trickier.
 

Read other 3 answers
RELEVANCY SCORE 64

Me bad. Bought a new cheap MB (Biostar tforce 550) which has only one IDE connector.
But I want to connect an optical drive and a spare IDE HD.
I remember that using one IDE cable for the two could cause problems, and a hit in performance.
The first I think can be corrected by putting the HD first. But how big is the performance hit?
Does it only occur when using the optical drive?
Thanks
 

A:one IDE connector.

Read other 7 answers
RELEVANCY SCORE 64

I have several HD's and DVD's that have been removed from computers.
I would like to connect one of the Lightscribe DVD's to a computer that has no workable internal slot to install the drive in.
Is there a cable that I could use to connect the IDE drive to a spare SATA connector and allow the drive to be used outside of the computer for writing a few discs.
I have found some plug in converters but would like to find a single plug to plug cable (plug into the back of the DVD drive and route the cable into a spare SATA slot/connection inside the computer.
I hope this makes sense and someone can point me to a solution.
Thanks.
Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 10 Pro, 64 bit
Processor: Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz, Intel64 Family 6 Model 94 Stepping 3
Processor Count: 8
RAM: 16323 Mb
Graphics Card: NVIDIA GeForce GTX 960, -2048 Mb
Hard Drives: C: 1862 GB (1741 GB Free); D: 931 GB (81 GB Free); E: 3726 GB (3066 GB Free);
Motherboard: HP, 2B4B
Antivirus: Norton Security Suite, Enabled and Updated
 

Read other answers
RELEVANCY SCORE 64

Hi guys,:wave:

I've lost my Cellphone's USB Cable/Connector.
I want to transfer photos, videos, etc. from my CP to my PC.
Is there other way of connecting my CP to my PC?

thank you very much!

regards,
portaltreaf

Note: my cellphone is Nokia N72.
 

A:My CP's usb connector

You realize this is a computer forum don't you?

Within 7 hrs you have created 5 new threads and posted 13 posts
You certainly need a lot of help :rolleyes:

I'd say for this one, buy a new cable !
 

Read other 3 answers
RELEVANCY SCORE 64

I noticed on a motherboard there was a 8pin connector but 4 were covered by a sticker...what is the 8pin for and is there a cable i can convert to a 8pin???

A:8 pin connector?

You only use it if your PSU has an 8 pin.

if you really want to use the 8pin here is an adapter,
http://www.directron.com/ad202.html

http://en.wikipedia.org/wiki/EPS12V

Read other 4 answers
RELEVANCY SCORE 64

i have recently bought a psp/tv cable so i can play things on psp on the tv. the cable has 5 connectors, 1 Blue 1 Green 1 Yellow 2 Red, which of these connectors do i use in the tv? does anyonehave any suggections
 

A:psp/tv connector

Read other 8 answers
RELEVANCY SCORE 64

well here goes...i have a compaq presario 1900xl-163..(notebook)
and i have been trying for weeks to find the interface cables that connect the dvd and floppy to the thing....
but everywhere sofar ..nothing...

the dvd and the board it attaches to are both 50 pin female.
so the cable needs to be male on both ends...
the drive is a toshiba sd-c2302.
so..if anyone has any idea where i can find this cable it will be greatly appreciated...
ps i tried every way that i know of to get one from compaq but they are very uncooperative..
 

A:dvd connector

www.pricewatch.com has every doo-dad under the sun for computers, that would be a good place to check first. Best of all, its cheap!
 

Read other 3 answers
RELEVANCY SCORE 64

I've got a Jaton brand GeForce4 TI4200 video card.
Lost the dang manual, and manufacturer's website is none-too-helpful.
Beside the blue VGA connector, there's a round connector, with 9 pins (female). It's not marked, and I initially thought it was for TV-out (S-Video), but I can't find another on the web that looks similar.

I'm hoping to use it as a TV-out, I guess I'd better figure out what it is first...
Any help will be very much appreciated.
Oh yeah, here's a link to a pic:

http://img78.photobucket.com/albums/v239/jamesl777/?action=view&current=video_card_connectors.jpg

Thanks for your time,
James
 

A:What connector is this?

Read other 8 answers
RELEVANCY SCORE 64

May I direct you to my post on another forum instead of reposting it all?
http://www.hardwareforums.com/what-kind-connector-lcd-controller-21858/

It seems that either no one knows or cares to reply. Just post any replies here instead of having to sign up over there. Thanks for any help!
 

A:what is this connector

I am pretty sure that would be an LVDS (Low Voltage Differential Signaling) Connector. The fourth picture is your LCD Inverter.
 

Read other 1 answers
RELEVANCY SCORE 64

I have a problem. I had an old PC running Win98, and the C drive went bad. I had some photos and music on another drive. I purchased a new computer, running WinXP. I also purchased one of the USB to IDE converters so I could plug the drive with the pics into my new system and recover the pics, etc. My system recognizes the drive being attached to the USB, but I can't seem to access the info on the drive. Am I missing something, or perhaps it's impossible to recover the pics since I'm now running WinXP instead of Win98? Any help would be appreciated, since I'd hate to lose the pics! Thanks,

Tom
 

A:USB to IDE connector HELP!!

Read other 14 answers