Over 1 million tech questions and answers.

Virtual XP can ping host but cannot access host resources via workgroup

Q: Virtual XP can ping host but cannot access host resources via workgroup

I'm running Windows 7 Pro 64-bit, and have installed the Virtual XP mode. A long time ago Virtual XP was fully running, with access to host resources (drives etc). But my system underwent some software changes, and then Virtual XP could no longer
access the host resources. After trying (unsuccessfully) all the tricks found on several forums, I decided to uninstall then reinstall Virtual XP, which I have just done. But I still can't access host drives. Here's how Virtual XP is set
up:
Workgroup name is set to the same as my host (confirmed in 'My Computer'/Properties/Name);
Networking 'Adapter 1' set to my host's NIC; I have assigned a fixed IP address to the Virtual XP (this has worked previously; all devices on my Win7 network have fixed addresses, for good reason).

Integration Features has ticks in the boxes for those host drives I want to access from VXP.
I can successfully ping the host, via name or IP address; I can successfully ping web sites by name (e.g. 'yahoo.com'). But when I open Windows Explorer and open the 'My Network Places' tree, it opens down to the name of my host workgroup, but
when I click on that workgroup name, after several seconds it pops up an error box saying: "<workgroupname> is not accessible. You might not have permission to use this network resource. <blah blah>. The service has not been
started."
Any suggestions on how to get access to my host drives?
Thanks, Daniel

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Virtual XP can ping host but cannot access host resources via workgroup

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 98.4

I just installed windows 8.1 pro on an MSI z97 pc mate motherboard with I5 3.3 ghz processor, 16 gb ddr3 1600 MHz ram, with embedded realtek pcie gbe NIC. I checked and found that hardware virtualization is enabled by default in the BIOS.

I tried to set up a virtual switch using the latest bios and drivers from MSI. I created a virtual switch choosing the external option and the share with host OS option. I then connected to the VM. No network connectivity on VM but host still worked.

I then used autopatcher to update windows 8.1 on the vm. I removed and reinstalled the virtual switch choosing external option and share with host OS option. Same conditions occurred.
And then I installed the latest NIC driver. Same problem - media disconnected.

I tried this process with the latest driver from the realtek website which was a couple years more up to date. I had such high hopes! Same problem.

I then used msconfig to prevent all non-Microsoft services from starting and rebooted. I removed and recreated the switch and I was still hoping for success. Same exact conditions occurred.

These are the conditions that occur whenever an external switch with host os sharing enabled is installed in between all of these troubleshooting steps. It looks exactly the same every time...
The host machine can still access the network but it does so through the virtual switch. Ipconfig /all on the host reveals the following...
Microsoft Windows [Version 6.3.9600]
(c) 2013 M... Read more

Read other answers
RELEVANCY SCORE 93.2

I am a web application developer, and I use the virtual host feature of the Apache web server to have local copies of several web sites on my PC. This has worked for years under Windows XP, Windows 7 and also Windows 10 - until installing the Creators Update,
since when I can only access one of my virtual hosts with Internet Explorer. I can access all of them with Edge, Firefox, and Opera, but all but one of them give me the INET_E_RESOURCE_NOT_FOUND error with IE.

I have tried the suggested fixes I have found in numerous posts, but none of them work. Any ideas?

Read other answers
RELEVANCY SCORE 91.2

Hi there,
I've just installed a virtual machine (running XP Pro) onto my Vista machine. The Vista machine has a USB external hard drive attached. When trying to access the data on this hard drive from within the virtual machine (via the bridged network link between the virtual machine and the host) it is incredibly slow. I've tried moving the USB hard drive to another PC on the network (running XP Pro) and accessing it from the XP Pro virtual machine on the first PC, and this works fine. I'd be very grateful for any help or ideas!
Glen
 

A:Virtual Machine on Vista Host - Slow Disk Access

Have you tried using a different port? Could be a slow port.

maybe trying towing down some resources? disabling areo on vista maybe?
 

Read other 3 answers
RELEVANCY SCORE 85.2

I would like some expertise to look at this hijack this post and help to determine if there is malware at work with this problem. I am running windows XP SP 3 on an acer aspire AOA150 netbook. I scanned the system with avast anti-virus (free) and Malwarebytes (both updated) but both programs were unable to locate any infected files. Any help is appreciated.

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 4:17:48 PM, on 1/19/2011
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\csrss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Alwil Software\Avast5\AvastSvc.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Alwil Software\Avast5\avastUI.exe
C:\WINDOWS\RTHDCPL.EXE
C:\WINDOWS\PLFSetL.exe
C:\Prog... Read more

A:Can ping but cannot browse or ping ip address of local host.

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:We need to create an OTL ReportPlease download OTL from one of the following mirrors:This is THE MirrorSave it to your desktop.Double click on the icon on your desktop.Click the "Scan All Users" checkbox.Push the button.Two reports will open, copy and paste them in a reply here:OTL.txt <-- Will be openedExtra.txt <-- Will be minimizedWe also need a log from the GMER anti-rootkit scanner. Please first dis... Read more

Read other 3 answers
RELEVANCY SCORE 83.2

I am still having ONE small issue. I got the additions installed, but it is still not allowing me to set up a shared folder between the virtual machine and the host system. It's saying "Not installed." Here, I'll give you a screenshot of the issue I'm getting.

A:Virtual PC 2007 - set up a shared folder between virtual machine and host?

Hi,

Start your virtual machine & install the additions pack under "Action"

Read other 3 answers
RELEVANCY SCORE 80.8

Hey
I upgraded my sysem to Windows 7 OS. I couldn't load Matlab due to host name resolution problem.
The problem is that I can Ping my IP address but I cannot ping the hostname.
Can any one please help me on this

Sunil tyagi
 

A:Can Ping IP but not the Host name

Read other 16 answers
RELEVANCY SCORE 80.8

I was configuring routers today and a problem arose. One of the hosts on the network could be the pingee but not the pinger. It could not even ping its default gateway. I double checked got someone else to check that every thing was configured correctly.
What could have gone wrong if not for the misconfiguration?

Thanks

Not a big poster on here, but that Bob sure did sound like a pretty good guy.
 

A:Can ping host but host can't ping another int?

Well, my top suspect is a misconfiguration of the firewall on the machine in question.
 

Read other 2 answers
RELEVANCY SCORE 80

First tiem asking for help. I am at my wits end.

Every time I ping avg.com I get the local host 127.0.0.1.

There are no entries in the hosts file. I clear the dns resolver cache and still get local host. When I add avg,com to the host file the reverse dns pointer is correct in the resolver cache but the pointer A record shows up as local host.

I have disabled netbios and there is no lmhost file.

I realize ping is a winsock app and I have dbl checked winsocks and any bogus lsp. I searched for ads and rootkits and found none.

I have rebuilt the tcp\ip stack by removing the nic deleteing the nic enumerations and reinstalling.

I did a packet capture and no icmp packet is even created. Of course nslookup work as it queries the dns directly. My thinking is that there may be a hostname alias because the way MS does name resolution for pings it would stop there and not create an ICMP packet, I can?t seem to find any but am not quite sure where to look

Any ideas?

A:Ping avg.com local host

I am not sure how to move this, it may be for the networking gurus.

I total rebuilt tcp/ip and winsock from instruction in that forum. Also did some expermentation. That re-enforces my idea that it has to do with an aliase

I disbled dnscache and still ping avg.com to local host 127.0.0.1. I fooled around with dns cache provider order, same results. Added the PrioritizeRecrodData=1 dword which is suppose to force dns query beyond the local subnet in case of roundrobin applications. Same results, ping avg.com and it returns 127.0.0.1, (remembr I do not have any host entry but a dummy one for avg.com to resolve to 10.53.10.10 and there is no lmhostfile. I even disbaled dnscache and it still resolves to 127.0.0.1.

Given all that and knowing the first thing ping does when resloving is check to see if it a localhost name and stops. (remember I did a capture packet and there was no icmp packet created). Second after turning the dns cache backon the resolver cahches an A record for avg.com and the record name is "localhost" see output below.

avg.com
----------------------------------------
Record Name . . . . . : localhost
Record Type . . . . . : 1
Time To Live . . . . : 602447
Data Length . . . . . : 4
Section . . . . . . . : Answer
A (Host) Record . . . : 127.0.0.1

must be an alias for "localhost", but where....... please help. Thanks

Read other 8 answers
RELEVANCY SCORE 80

Hello.
I like connect to a FTP and I can ping the IP but FTP can't work. I used "tracert" and "nslookup" command and everything seems OK but I can't use FTP.


How can I troubleshooting it? I disabled Firewall but problem exist.



Thank you.

Read other answers
RELEVANCY SCORE 80

Hi there,

I've done a Google search and saw quite a few threads similar to mine, unfortunately none of the suggested solutions seemed to work for me, so I wonder if anyone can help.

I have a Windows XP Lenovo laptop that I suspect had some malware which has since been removed (ran various virus and malware killer scans and all come up empty).

However, while the laptop connects to the modem/router (via Ethernet, disabled wireless to avoid confusion) it doesn't seem to connect to the internet via any browsers (Chrome, IE etc).

Windows Firewall is disabled, no other firewall exists. Anti Virus is also disabled just to clear the path.

I can ping the router/modem by IP, I can ping other PC's on the home network by IP and name all successfully, I can also ping localhost successfully, but whenever I try to ping say www.yahoo.com it gives me the "ping request could not find host www.yahoo.com. Please check the name and try again". Pinging Yahoo's IP address however does work and gets responses.

I checked the host file name and it is empty apart from the "127.0.0.1 localhost" line.

I tried running some winsock fixing tools as well, but no luck. Still no internet connection.

If I type the IP address of my modem/router into a browser window I get the modem/router console, so connectivity between modem/router and the laptop is there, just not to the internet as such.

My "Ipconfig /all" output is as follows:
C:\Program Files\Sup... Read more

A:Windows XP Can ping IP, But Not Host Name

Read other 14 answers
RELEVANCY SCORE 80

Hello,

I have installed an Oracle DB (11.2) on a guest VM (Centos 5) and my host is Windows 7 Ultimate.

I need to able to connect to the DB from windows.

Ping status is as follows:

guest -> host - IP : Yes
guest -> host - hostname : Yes
guest -> guest - hostname : Yes
guest -> guest - IP : Yes
host -> guest - IP : No
host -> guest - hostname : No
host -> host - IP : Yes
host -> host - hostname : Yes

My VM IP is : 192.168.17.139

and when I do ipconfig /all this is my output:
Code:

C:\Windows\system32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : hostname
Primary Dns Suffix . . . . . . . : a.pri
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : a.pri
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : a.pri
Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet
Physical Address. . . . . . . . . : 00-1E-0B-34-8F-BE
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::319b:5ee:aab7:dee9%10(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.100.174(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : 2012 6 27 10:56:51
Lease Expires . . . . . . . . . . : 2012 7 27 10:56:51
Default Gat... Read more

A:Ping from host to guest with NAT

Read other 7 answers
RELEVANCY SCORE 80

This is my 2. day with Windows 7. I'm having difficulties sharing an internet connection. There's a one-way connection only, apparently.

Host: Windows 7 build 7100 (192.168.0.1).
Client: Debian (192.168.0.2).

Host and client is connected via cross-over cable. Host features a second network connection to a switch box.

I can connect to Samba share on client, and ping 192.168.0.2 too. SSH login on client is accessible also. But I can't ping host at 192.168.0.1 from client. Therefore no internet connection

I'm kind of lost, so any help much appreciated.

A:Client can't ping host

Hi there
whilst testing switch off all firewalls etc. I think W7 needs to have remote access allowed as well.

Cheers
jimbo

Read other 2 answers
RELEVANCY SCORE 80

I'm trying to setup ICS between two XP PCs, as well as File and Printer Sharing. The host is directly connected to the net via ADSL, and is connected physically to the client via a cable. I've looked all over the net for solutions, but the problem doesn't seem to be solved. My host comp can't ping to the client, but my client has no problem pinging the host. Also, the Deafult Gateway icon is missing. My guess is that something is wrong with the client's IP since I used the IP can't be found via third-party softwares, even though I'm sure I've assigned a static IP to the client. I've even double-checked with ipconfig.
Client's IP: 192.168.0.2
Host's IP: 192.168.0.1
I tried using CCProxy and the IP works, but I still want to use XP's ICS, since there are limitations to using a proxy. On a note, ICS has worked successfully on these PCs in the past. It no longer works after I reformatted one of the PCs.

Furthermore, I have problems with the file sharing. I tried sharing a folder on the host computer, and then map the network drive from the client. The error message appears, "The specified server cannot perform the requested operation". If anyone can tell me what exactly is the problem, I'll appreciate it. Thanks in advance.
 

A:Host PC can't ping client

Read other 6 answers
RELEVANCY SCORE 79.2

Hello,
I have the following problem on my computer:
I have a wierd trouble with the pinging of hosts by name. Every time i try to ping them by name, the result on the console is "Ping request could not find host [host name]....", though i can still ping by IP.
If anyone knows a way to fix it and is willing to help me ... PLEASE answer this thread.
I really tried almost everything possible - from uninstalling antivirus system, turning firewall off and other things which proved to be useless. (I am using Windows 7)
I am really desperate at the moment.
Thanks in advance.
 

A:Ping request could not find host!

Read other 16 answers
RELEVANCY SCORE 79.2

Hi,

I can browse the internet and can ping server like yahoo.com by ip address without any problems. But i can't connect to some ip addresses.
I'm new to windows vista and don't any ideas now. Help me pls!

Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\Farid>ping 4.79.152.141:443
Ping request could not find host 4.79.152.141:443. Please check the name and try
again.
C:\Users\Farid>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Farid-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : lan
Wireless LAN adapter Wireless Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) Wireless WiFi Link 4965AGN
Physical Address. . . . . . . . . : 00-1D-E0-D6-A2-E9
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : lan
Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet
Physical Address. . . . . . . . . : 00-1E-68-88-25-A0
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::989c:c187:c742:495d%10(Preferred)
IPv4 Address. . . . . . . . . . . : 192.1... Read more

A:Ping request could not find host

Please be more specific, what addresses are you having issues with?
 

Read other 1 answers
RELEVANCY SCORE 79.2

Can anyone point me in the right direction ?!?

I have a 3.51 server that is a memeber of a domain. I can successfully ping this server using its hosts name from a workstation on the same domain in the same office area. When I move this workstation to a seperate area in the office I can only successfully ping the server using its IP address. I am unable to connect to any of its resources (Network not found).

I can however still connect/ping the host name of the other servers on the same domain and in the same location as the faulty server.

Any comments gratefully received.
 

A:Unale to ping Server using its Host name

Are you using a name resolution server such as WINS or DNS or are you relying on broadcasts to resolve? Is there any hardware devices (routers) between the server and the new location of the workstation?
 

Read other 1 answers
RELEVANCY SCORE 79.2

hey guys i am using a pc which is connected to my internal network with an ip address 69.4.161.101/24

using this pc i have telnet from cmd into another router who's ip is 69.4.167.7/26

i can ping to router from pc in cmd...but i can't from router to pc

what do i need to do so that i can achieve layer 3 connectivity
 

Read other answers
RELEVANCY SCORE 79.2

Hi, I got this issue today after rebooting my computer (just because it hasnt been rebooted for weeks now). I am able to ping using address, but cannot use host names, including localhost. That applies to physical (home) network, VMnet's and VPN (work) networks. Also, Im able to connect to the VPN, even though the network Im connecting to is resolved by name I think. All my virtual devices are properly listed in the hosts config file.

flushdns did not help.

Any thoughts?

A:Ping request cannot find host by name

Also, I already tried enabling/disabling all adapters, rebooting again, and changing ip address to static and back to dynamic.

Read other 1 answers
RELEVANCY SCORE 79.2

hi all, i have my xbox and my router all on the same router, my subnet is the same and they are on the same network , im trying to media share from my windows 7 to my xbox 360, when i ping my xbox ip i get this:

C:\Users\Tippee>ping 192.168.11.8

Pinging 192.168.11.8 with 32 bytes of data:
Reply from 192.168.11.7: Destination host unreachable.
Reply from 192.168.11.7: Destination host unreachable.
Reply from 192.168.11.7: Destination host unreachable.
Reply from 192.168.11.7: Destination host unreachable.

Ping statistics for 192.168.11.8:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

C:\Users\Tippee>

i have turned on every file sharing option i can find ( i think ) i tryed this without my firewall on, same thing. please help me this is doing my head in!

Thanks very much

Tippee

A:ping; Destination host unreachable

Is there a default gateway option that you can put in for the xbox?

Read other 9 answers
RELEVANCY SCORE 78.4

Hi,

This one is really baffling me now...

I have windows 7 ultimate x64 on host and client for ICS.

Host is a laptop with a WIFI card and an Ethernet Card. (Sharing its WIFI through the ethernet card to the PC)

Client is a PC with only a Ethernet Card.

-------------------

Everything is working fine (I have internet from both - can ping each other etc)

But i cannot ping the actual router from the client (PC) - I can ping it fine from the laptop.

Says: Reply from 192.168.1.20: Destination Host Unreachable. (then repeats)

-------------------

Am i missing something? or is it supposed to work like this?



Any help would be majorlly appreachated - as i cannot get to the router login page from any computer other than the laptop which is connected to it wirelessly.

Thank you in advance?

Timez

A:Client cannot ping router through host (ICS) - No other problems...

I'm not 100% sure how ics works but my assumption would be that it acts as a router and as such is a layer 3 boundry device. What I would try doing is using a different subnet for the link from the pc to the laptop something like 192.168.2.0/24 as what I think is happening here is from the desktop when you try to access the router it is switching rather than routing and an ics box won't forward on layer 2 packets. I could be off the mark but try a different range on that link

Read other 2 answers
RELEVANCY SCORE 78.4

We have a network containing 15 computers most of them operating Windows 7. One main router connected to Internet, 3 switches and two routers configured as repeater (LAN connected for Internet - DHCP disabled). The network is Work-group type (named WORKGROUP).

Everything works great except one computer running Windows Professional (64bit) with a wired behavior. It is connected wireless through one of the two repeaters. On that repeater there are other 4 computers which can be seen and accessed in browse window.

That computer is able to see all the other machines in the network in browse window. Only it cannot be seen. But I can access its shared folders or shared printer mapping it by IP and shared path. Net use works for IP and for host-name too. Of course the Network discovery is ON, File and printer sharing is ON and Password protected sharing is Off. Antivirus temporary disable and Firewall disable, too...

I can see the incriminated computer on the Network map (with its IP, host-name and MAC address) but I cannot access it with a simple click like all the others. When press 'Click here to see all other devices' everything appears in browser window except this one...

What is strange is the fact that if I connect it to the main router (also wireless) it can be seen in the browser window... But all the other computers connected to the same repeater can be seen in browse window and accessed by simply clicking.

I can share its special label printer and I can use its shar... Read more

A:Computer able to ping by IP and host-name but not visual in browser

On the problem PC, see if these services are started:

- Server
- SSDP Discovery
- UPnP Device Host

Read other 9 answers
RELEVANCY SCORE 78.4

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz, Intel64 Family 6 Model 37 Stepping 2
Processor Count: 4
RAM: 3894 Mb
Graphics Card: Intel(R) HD Graphics, 1723 Mb
Hard Drives: C: Total - 99673 MB, Free - 32642 MB; D: Total - 153599 MB, Free - 84942 MB; E: Total - 153598 MB, Free - 102998 MB; F: Total - 69712 MB, Free - 57533 MB;
Motherboard: LENOVO, Base Board Product Name
Antivirus: Net Protector 2015, Updated: Yes, On-Demand Scanner: Enabled
I have 1ADSL Router DLINK 2750u (IP 192.168.1.1). 1 PC (win7) connected through LAN(IP 192.168.1.34) and 1 LAPTOP (win7) connected through WIFI (IP 192.168.1.35)
when i ping he says destination host unreachable
C:\Users\nilesh>ping 192.168.1.34
Pinging 192.168.1.34 with 32 bytes of data:
Reply from 192.168.1.35: Destination host unreachable.
Reply from 192.168.1.35: Destination host unreachable.
Reply from 192.168.1.35: Destination host unreachable.
Reply from 192.168.1.35: Destination host unreachable.
Ping statistics for 192.168.1.34:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
help me thanks
 

A:Solved: ping destination host unreachable

Read other 9 answers
RELEVANCY SCORE 78.4

When I try to ping ipv6.xsnews.nl on either of my Windows 7 computers, it returns "Ping request could not find host". But when I do it on XP, it succeeds. I have tried putting the W7 PC in the DMZ, disabling the software firewall but it doesn't help.

What I think it involves is having ipv6 installed on each. I tried to duplicate the setup of both the XP and a W7 computer, installing the gogo6 tunnel. But apparently it's not setup on this computer because the ping result is the same as on the third computer which hasn't had ipv6 installed.

I'm not sure where to even start in troubleshooting this since I've tried googling the error message and find lots of unrelated problems.
 

A:Can't ping/connect ipv6 host on Win7 vs XP

Half solved! Not the better half though.

I found out the reason why I could ping that and other sites that had ipv6-ness was that I was using an OpenDNS DNS on the XP computer. When I moved it to the Win7, I was able to ping.

But the problem remains, why am I not able to access ipv6 servers, and why do sites say I have no ipv6 data?
 

Read other 3 answers
RELEVANCY SCORE 78.4

One of three machines on my home network is giving me trouble.
All are running XP SP2.
Call the troublesome one machine "X". It does have connectivity, can access the internet through the router. However, it cannot be seen by other machines on the network, nor can it see shares from other machines.

Specifically, pinging from machine X:
ping other hosts by name or IP: Yes
ping localhost or 127.0.0.1: Yes
ping own hostname or own IP address: No reply.

Pinging from another machine on the network:
ping host other than "X": Yes
ping X by hostname or IP: No

Everything worked at one time, don't know what caused the change.
Any thoughts appreciated.
 

A:Solved: One host can't see network, ping own hostname

Turned out to be a firewall problem. (Symantec Client Firewall)
Needed to have 127.0.0.1 added to the trusted network IP's.
 

Read other 1 answers
RELEVANCY SCORE 78

HELLO IM TRYING TO RUN WINDOWS 10 on virtual box on MAC and it works for 10 minutes then once I log out and try to get back on an error occurs. Please help!
 

Read other answers
RELEVANCY SCORE 78

This is driving me crazy...

I have Vista 64 running Virtual PC 2007 can I run Windows 2008 32 bit as a guest??? I can't seem to get it installed by capturing either of the Windows 2008 ISO images (32 or 64) I DL'd from Microsoft's site. I hope I am doing something stupid....

A:Virtual PC Vista64 as a host

Hmmm...I got it working. Not really sure how....Maybe I just needed to post here....

Read other 1 answers
RELEVANCY SCORE 77.6

So all the computers seems able to connect to the internet except one.

My ip config/all
Windows IP Configuration

Host Name . . . . . . . . . . . . : Fang-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) 82578DC Gigabit Network Connecti
on
Physical Address. . . . . . . . . : C8-0A-A9-FF-FE-EE
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : 802.11n Wireless LAN Card
Physical Address. . . . . . . . . : 1C-65-9D-DA-51-3E
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::1c35:3a6d:6e73:b54c%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.107(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : November-25-13 11:18:51 AM
Lease Expires . . . . . . . . . . : November-26-13 11:24:44 AM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 191896068
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-21-C8-4C-C8-0A-A9-FF-FE-EE

DNS Servers . . . .... Read more

A:Ping request could not find the host...Can't connect to the internet

Read other 14 answers
RELEVANCY SCORE 77.6

Hi, recently I had some malware on my Windows XP Professional (version 2002), so I followed a guide at Bleeping Computer (http://www.bleepingcomputer.com/virus-removal/remove-win-7-internet-security-2011) to get rid of it. Problem is, for some reason, after I finished, I could no longer access the internet!

When I try, FIrefox gives me their "could not connect" message:
"Server not found. Firefox can't find the server at [site]." Check the address for typing errors such as ww.example.com instead of www.example.com..."

When I try to log into MSN, the troubleshoot says I have a problem with my DNS and Key Ports.

I'm not good with computers so I Google'd and found some ping-ing instructions. When I tried to ping [site], I get:
"Ping request could not find host [site]. Please check the name and try again."
This happens regardless of the site I use.

Lastly, I tried "ping 127.0.0.1" from a troubleshooting site. It gives me:
"Pinging 127.0.0.1 with 32 bytes of data:

Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128

Ping statistics for 127.0.0.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss).
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms"

Any help would be much appreciated, thank you!
 

A:Solved: Ping could not find host, DNS and key port problems

Read other 12 answers
RELEVANCY SCORE 77.6

Probably a simple question for most...
I have a small SOHO setup.
Cable Modem --> D-Link Router --> 2 PCs networked together using TCP/IP
I am just curious how it is letting me ping from one PC to the other by using the HOST name of the PC. I know pinging the IP should work but how can it ping the HOST name? How is this possible since I don't have a DNS server running and I haven't modified the HOSTS file to tell the PCs that this HOST name is tied to this IP address.
Does it have something to do with NetBIOS?
Thanks...just wanted to know how it works under the hood.
Sman

A:[SOLVED] Able to Ping host names without DNS installed, how is it working?

I think there are settings in the router that resolve the names. Type in the address to access your routers settings and see if DNS is enabled.

Read other 6 answers
RELEVANCY SCORE 77.6

this worked for me previously but i started from scratch and now it doesn't.
I have a single pc running windows 7 with a lan cable from it to a synology diskstation NAS.
my win7 pc is 192.168.0.10 and my nas box server name is 'data' with ip 192.168.0.20.

the other day within windows i was able to do \\data in an address bar and saw my file shares. I redid the NAS box today to make sure i understand how everything works, now doing \\data does not work from the win7 pc.

in a command prompt i type 'ping data' and it says could not find host.
but if i do ping 192.168.0.20 it pings successfully, and if i do \\192.168.0.20 in an address bar it shows my file shares and everything works fine

on the windows 7 pc, what causes this and how do i fix?
thanks.

A:windows 7 ping cannot find host but ip address works

Check Network discovery in Control Panel - Network and sharing center - Advanced sharing settings

Read other 9 answers
RELEVANCY SCORE 77.2

Hi,
I'm trying to get virtual pc 2007 to start a virtual machine, but as the virtual machine starts, it reboots the host pc. The virtual hard drive I'm using is Xp SP2 with IE6 installed. The host machine is XP SP2.

Anybody got any ideas ?

Thanks
 

Read other answers
RELEVANCY SCORE 77.2

I am running Mac OSx through virtualization using VirtualBox. I have a bunch of stuff on there that I don't have on my main OS, Windows 7. I was wondering if there was a way to be able to access it on windows without opening the virtual mac, or without downloading it separately on the windows. Because everything is still on this hard drive, so can't I just search for it in windows and be able to find it? It's not that big of a deal for now since its just mainly pictures and music, which I can easily get on Windows in the first place. But I was thinking about putting some movies and bigger sized files on OSx and I just started wondering if I would be able to get them on the windows.

Anyways, like I said it's not that big of a deal if I can't. I just want to know if it's possible.

And just to quickly re-explain my little situation just incase you got confused. My computer runs Windows 7. And through a program I download called VirtualBox, I can boot into Mac OSx through virtualization. I creaded a virtual hard drive and gave it like 120 gigs out of my 600 gig hard drive.
 

A:Could content on a virtual OS be found on the host OS?

Read other 9 answers
RELEVANCY SCORE 76.8

IBM Connect Direct application used for Host to Host connectivity has been picked up as a Trojan Virus by some Microsoft Security Products including Defender, System Centre Endpoint Protection, System Centre Endpoint
Protection 2012 and Security Essentials.

The result is that Connect Direct is deleted by the security software.
Question: What will be the implication of excluding this from the security policy?

Read other answers
RELEVANCY SCORE 76.4

Hi,

Firstly I am no n00b when it comes to operating systems.  I have been playing this game for more years than I care.  However this thing has got me well and truly stumped.

Not too long ago I believe my machine must have been hit with a rootkit virus of some sort.  I run AVG but for reasons it did not pick this up.  None the less, this has now been cleaned.

Initially it took out my network cards, my wirless, my firewall, renamed my machine with no name, and all sorts of fun things.  Good times, but now mostly resolved.  What I still don't have is internet access.

I am connected to my router (along with my other equipment), trusting in DHCP which works as it should.  I am running Windows 7 home edition (64 bit).  Now the fun part.....I am unable to ping anything by hostname.  Absolutely nada. 
I can't can't ping localhost "Ping request could not find host localhost. Please check the name and try again.".  In fact I can throw anything I like in the host file and it will come up with the same error. 

I can 100% ping everything via IP address, no issues.
I get 100% responses from nslookup.
I am unable to ping by hostname only.  This is somewhat troublesome as this prevents me from getting to the internet and other things.
I have reset winsock, I have reset tcp, I have uninstalled both my nics and reinstalled them, I have uninstalled SP1 and reinstalled it.  I suspe... Read more

Read other answers
RELEVANCY SCORE 76.4

Hi There

I'm helpdesk support for the company I work for and have recenty hit a wall with Windows 7. We have two sites, both with seperate servers. All our computers are networked and named.
The program I normally use to access another computer to help support them is called UltraVNC. I simply enter in the computers name (i.e. "test1") and I can connect to their desktop, alternatively I can also use their IP Address.

The Problem: Now recently we've been doing hardware roll-overs, upgrading alot of our XP machines to Windows 7, and this has raised a few conflicts for our second site. The current one at present is I am unable to get to reach any Windows 7 machines from our second site (I'm primarily based at our first site).
When I say reach, I mean I am unable to:
- Ping using command prompt
- Connect using ultraVNC
- Connect using an RDP connection
- Or map a network drive
USING the computers name only. If I use the IP Address for any of the above it works perfectly fine.
What I can connect to using the computers name are:
- Site One: Any computer windows XP to 7
- Site Two: Windows XP computers only (but also including the domain which is Windows Server 2008).

These Computers are Windows 7 Profesional 64bit Machines, Lenovo Product branded.

What I've tried/Checked:
- Windows firewall is disabled, but I have also checked under Advanced Settings and enabled File and Printer Sharing (Echo Request - ICMPV4-In).
- Remote Desktop Settings are set to allow co... Read more

A:Ping request could not find host *Insert windows 7 computer name here*

Sounds like something that came with the OEM Windows 7 machines are blocking it.

Is there a DNS server in each Site? If you are logged on to any XP or Server 2008 machine on Site 2 can you still not browse to Windows 7 machines via hostname in the second Site?

Read other 2 answers
RELEVANCY SCORE 76.4

I have an old program that will run on XP but not Win 7 Pro and I am using Windows Virtual PC on my laptop to run it. It works fine but I cannot access files (share drives) from the main hard drive, i.e., the Win 7 file structure. I can work with the VM XP file structure but not the main files. I am able to access flash drives from the VM and so I can move the files around this way but it is very cumbersome. This machine is not on any sort of network. I have done the same thing on my desktop and have exactly the same problem (it operates on Win 7 Pro as well). Security is not a concern; I am the only user of these machines.

I have read what I can find about this and tried resetting all kinds of "sharing" permissions, including sharing just a folder instead of the entire drive, enabling sharing from both the Win 7 side and the VM XP side, etc. I've tried everything I can but to no avail.

Can anyone offer some ideas and/or direct me to a thorough discussion of this issue? Thanks in advance.

A:Cannot Share Host Drive while Using XP Virtual Machine in Win 7

Read here, see if it helps: Share host drives with a virtual machine

Read other 2 answers
RELEVANCY SCORE 76.4

Hi,
Any help will be much appreciated guys!
I 'm trying to give an internet to that virtual machine JanusVM
which I power by VMplayer.
So far I have no success.
My ISP map my MAC to my IP so when I bridge the ethernet adapter of JanusVM to the host PC I do not have any internet at all.
I tried to NAT the virtual ethernet adapter either, but no difference.
My OS is WinXp Pro.
Any ideas ?
 

A:Share internet connection between virtual PC and host PC

Read other 8 answers
RELEVANCY SCORE 76.4

I Have installed Virtual PC on my Windows 7 Home Premium system. I have created a virtual machine, installed windows 95 and then installed the Additions from Virtual PC 2004. The integration features (mouse etc) work fine. I have checked all the drives in integration features but I still can't see the hard drives of the host system. Why? Please help.

A:see host drive on windows95 Virtual Machine

Not to change the subject... but what version of Virtual PC do you have? The latest version shouldn't support 95 or 98.

Read other 2 answers
RELEVANCY SCORE 76.4

Hi,

I have a linux virtual machine that I forgot which machine it being hosted on. Is it possible to find that some if I ssh into the virtual machine?
 

Read other answers
RELEVANCY SCORE 76.4

I was trying to enter a new host file on one of our remote user?s laptop and when I went to open the file it showed a bunch of Chinese symbols and wouldn?t let me do anything with it? I tried deleting it and then tried to build a new host file from scratch and the same thing happened??? I?ve never seen this before. Any suggestions?

Read other answers
RELEVANCY SCORE 75.6

I'm running windows 7 ultimate and i haven't run XP mode in a while so i'm not sure if it was an update or what that caused this. but the crashes that i'm referencing happened on 4/27/2012 hopefully i can get some help with this issue =) thank you in advanced

A:BSOD Opening Virtual PC (XP mode) host PC crashes

Related to EtronHub3.sys eXtensible Hub Driver. from Etron Technology Inc. Yours is from 2/2011. I would re-install newest available.

Read other 7 answers
RELEVANCY SCORE 75.6

I'm looking to set up a couple of VM hosts and am trying to decide how to set up the storage,
Storage Technolgy - I was thinking about SSDs as our current servers have 146gb SAS drives and we don't have space issues, 256gb SSDs would give us room for future expansion. What model of SSDs would be best? I only have experience with Samsung 830s, are there server grade drives we are not heavy usage?
Connectivity/Backup - I'm unsure how best to connect whatever storage I decide on, I'd like to be able to move VMs between the two Hosts to load balance and for redundancy if one host goes down.

I've had a bit of a look into iSCSI as FC is probably out of my budget and it looks like it would help by centralsing all the VMs, backup could be to a secondary iSCSI host. I'm not sure of the performance I'd get though without going to 10gb.

The other option would just be local raid cards with additional slow SATA storage to cross backup the VMs, looking around most VM hosts have live backup utilities that would do the job then if a host failed it would just be a case of moving the VM to the primary storage from the backup and starting it again. (changing the backup to local until the other host comes back up) I could then back the slow storage to portable disks to take off site in case of loss of both hosts or for data recovery.
 

A:Storage and Backup for Dual Host-Virtual Servers

Could anyone please reccomend a better forum for this type of question?
 

Read other 1 answers
RELEVANCY SCORE 74.8

I have a local area network of four Windows 7 PCs. The PCs are named Term1, Term2, Term3 and Term4.

Term1 is the server PC.

When I map to Term1 from the other Terms(2,3 and 4) I always used the command:
Net use F: \\Term1\c /user:Admin 1234


This worked fine before; now it suddenly refuses to connect this way ? I have to replace Term1 with the actual IP address of Term1 for it to work.

I
have tried the following Admin CMD commands:


netsh
int ip reset
ipconfig
/flushdns

All of these commands make no difference; I just can't connect using the server name (Term1).

What I strangely noticed is that from any of the terminals connected to Term1 (using the IP address); if I use, for example, ping Term1,
I get an address return of 127.0.0.1.home;
this address of 127.0.0.1.home will
display if I ping to Term2, Term3 or Term4.

I cannot find any solution on the web for this strange problem.

Read other answers
RELEVANCY SCORE 74.8

Greetings,

I need drivers for an old cable mark as (Wiretec)  USB host to host bridge which contain the chip GL620USB-A , It has color like Green and aboud 2 meters.

Does someone know where I can find a device driver so that USB will work. Right now only my USB host to host bridge is not recognized/enabled. I can't find anywhere a device driver; neither on the included CD(It's damaged) nor the internet.

If there's no driver available, are there any alternatives so.

Read other answers
RELEVANCY SCORE 74

Since ive installed the anniversary update everytime i try to start a VirtualBOX vm or any virtual machine for that matter my host pc gets BSOD ive tried reinstalling the virtualbox but that didnt help This is my dump  ==================================================Dump File         : 081116-7562-01.dmpCrash Time        : 8/11/2016 3:53:48 PMBug Check String  : SYSTEM_SERVICE_EXCEPTIONBug Check Code    : 0x0000003bParameter 1       : 00000000`c0000096Parameter 2       : ffff9d01`2387d8b3Parameter 3       : ffff9d01`22e27ce0Parameter 4       : 00000000`00000000Caused By Driver  : ntoskrnl.exeCaused By Address : ntoskrnl.exe+149f90File Description  : NT Kernel & SystemProduct Name      : Microsoft® Windows® Operating SystemCompany           : Microsoft CorporationFile Version      : 10.0.14393.0 (rs1_release.160715-1616)Processor         : x64Crash Address     : ntoskrnl.exe+149f90Stack Address 1   : Stack Address 2   : Stack Address 3   : Computer Name     : Full Path         : C:\WINDOWS\Minidump\081116-7562-01.dmpProcessors Count  : 8Major Version     : 15Minor Version     : 14393Dump File Size    : 571,356Dump File Time    : 8/1... Read more

A:After installing windows 10 anniversary update BSOD on virtual machine host

Turns out removing Hyper-V as a feature resolves this issue thanks Microsoft

Read other 1 answers