Over 1 million tech questions and answers.

Main Problem is Windows 7 not allowing updates or installs

Q: Main Problem is Windows 7 not allowing updates or installs

I have a Compaq Presario which has a fresh install of Windows 7 (legit). All was fine until I was playing a game on Facebook and when I went to play it again one day it wouldn't load properly to the game. I saw a popup prompting that to play games you might want adobe flash player installed but I am fairly sure I installed that when I installed windows7. I am normally very thorough but I tried to reinstall it anyway since it wouldn't or shouldn't hurt.
 
I then found that it wouldn't follow all the way through on the install. Partway through the install I get a popup saying "Installation encountered errors. Actionlist not found."
 
I am also getting messages almost everytime I try to go to a website. I get a screen message that the site is dangerous and I have to agree to an exception in my security to get there. I never set my security that high or like that. It has done that on it's own. I am trying to find where to lower the sensitivity but have had no luck so far.
 
Sometimes when I left click on a link or anything on the webpage that requires a left mouse click it does not accept it. I know that there is nothing wrong with the mouse. I have tested and confirmed it.
 
Does anyone know what might me happening. My Avast virus scan shows nothing. I have Tune up Utilities and it fixed all problems it found but no help and also I am having problems with windows update. Please help if you have ideas about what is going on. Everything was fine until I put the Facebook account on there and started playing "Mobsters: Criminal Empire"

RELEVANCY SCORE 200
Preferred Solution: Main Problem is Windows 7 not allowing updates or installs

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Main Problem is Windows 7 not allowing updates or installs

You can adjust your security setting from 'Control Panel / Internet Options / Security' but it is possible you have picked up a malware infection. I would advise that you download Malwareytes from here :
 
Malwarebytes Anti-Malware

 
and run it as per its instructions. If this shows anything that you cannot confidentally deal with yourself, or that Malwarebytes cannot deal with on your behalf, you should post baqck here but in the 'Am I infected' section.
 
Chris Cosgrove

Read other 2 answers
RELEVANCY SCORE 64.4

Hey guys, hopefully someone has some suggestions for me. My fiance managed to get the Advanced Virus Remover and the Antivirus Pro Mailware. I searched around for some help with the mailware and found the geek police website. I searched through the forums and found some posts with the same problem. I decided to run a combo fix program that was posted by the website.

I didn't read the initial post in that forum saying to not run programs from other people's posts since they are custom for each person based on the hijack this log. Doh!!!

Anyway, I tried downloading hijack this to create a log but it wouldn't install. I even tried installing it in safe mode. Next I tried to install Mailwarebytes but got the same result. Finally one of the members from the forum site sent me a link for SystemLook.exe. I was able to install it in safe mode, ran it, submitted a report to the site. They directed me to a link for avenger.exe which scanned for rootkits. Then I submitted the output log and they gave me a link for combo-fix.exe. I got it to run in safe mode and finally the ridiculously annoying popups subsided.

It cleaned out the infected files and the infected registry keys. I submitted the output log and they felt it was taken care of. I tried to install AVG 8.5 and I got this error message:

Local machine: installed successfully
Installation:
Warning: Action failed for registry key HKCU\Software\Avg (Administrator): creating registry key....
Error 0x80070005
Warni... Read more

A:Registry Error not allowing any installs, please help

You may have indeed damaged your computer with the use of ComboFix. It's a powerful tool and very effective to remove malware but should never be used without the help of an expert.

As for iTunes, read this and this.
 

Read other 3 answers
RELEVANCY SCORE 64.4

I have a Sony Vaio with Windows xp operating system. Lately when I have tried to install anything on the computer it tells me c:\windows\system32\autoexec.nt system file is not suitable for running MS_DOS and Microsoft Windows Applications.......I haven't been able to find any info on this error or how to fix it. Any help would be appreciated..........Thanks, Lynn

A:system32 error not allowing any installs

Have you tried this yet?:
http://support.microsoft.com/default...b;en-us;324767

Read other 1 answers
RELEVANCY SCORE 61.6

I have two connections, one with Rogers, one with Bell, for some reason now my connection with Rogers won't work with my Online Armor firewall turned on, it used to work but suddenly stopped one night. Bell has and still works. I have tried fiddling with Online Armor, but I can't figure out what I have to do to make Online Armor not block the Rogers connection, even though the connection is 'trusted'. Can someone help me out?

A:Online Armor not allowing my main inet connection

After going to the official Online Armor forum, and noticing other people are having similar problems and getting no solutions I've decided to uninstall Online Armor and have now installed Comodo.

Read other 1 answers
RELEVANCY SCORE 60.8

Shortly after 3 am today, I noticed my Win 7 SP1 computer was about to automatically restart in order to complete installing updates. Before I could abort this, the computer restarted. And I immediately noticed that wretched Icon to "Get Windows 10" in my notification tray, with no way to remove or disable it.
When I checked my view updates history in Control Panel>Windows update, I saw that no less than 39 "Recommended" updates had been installed on May 31 - some issued as far back as 2012. Not one of them applied to issues on my system (the ones fixing problems with Lithuanian and Russian currency spring to mind as examples). In short, they all looked like updates I had hidden.
I checked my Windows Update settings, and Automatic Updates was still disabled. I went to Windows Update, and my "Hidden Updates" folder was empty. Well, at least I knew the what and where, if not the how and why, of what had happened.
Well, it was easy enough to uninstall the update that put the "Get Windows 10" icon in my tray - I just uninstalled the KB3035583 update from Control Panel in the usual way. Only took 3-4 minutes, including a system restart. Great - one uninstalled useless update down, only 36 to go. That should only take 2-3 hours.
But KB2600217 and KB2901983 were .NET Framework updates I had hidden back in 2015. And when I check Windows Update, it is now offering me no less than 12  Important .NET security updates that have been issued ... Read more

A:Windows installs hidden updates

Did you install the recent Win 7 SP1 KB3125574 convenience rollup? Maybe they got installed via that rollup??  Or did they get automatically installed because you didn't install the roll-up?
I have Win 7Pro+SP1 (32-bit) and I've only been offered MSE updates in past few days...
Make sure you specifically cancel the upgrade to Win 10 by clicking the link in the upgrade box to Change or Cancel... Just clicking the red X to close the box does not cancel the update. Clicking that X means you accept the upgrade and it will happen without further warning.
MS has been getting way too pushy and doing things without permission recently and that needs to STOP!

Read other 1 answers
RELEVANCY SCORE 60.8

See attachment. Has anyone else had trouble installing this update? I just ran a Windows validator on Windows 7 (legitcheck.hta) with said it was valid software (duh), and I have been able to install other updates and patches, except this one, which has to do with:

Security Update for Microsoft Visual C++ 2008 Restributible Package (KB973924)

I have it downloaded, but each time I try to install it, it fails. Is there a reason for this?

A:Windows Update installs all updates but this one.. Why?

  
Quote: Originally Posted by djpurity


See attachment. Has anyone else had trouble installing this update? I just ran a Windows validator on Windows 7 (legitcheck.hta) with said it was valid software (duh), and I have been able to install other updates and patches, except this one, which has to do with:

Security Update for Microsoft Visual C++ 2008 Restributible Package (KB973924)

I have it downloaded, but each time I try to install it, it fails. Is there a reason for this?


Hi and welcome

What error message are you getting on fail?

If no message you can go into event viewer (type eventvwr in search) go to the windows logs>applications tab, and systems tab. Look for updates and see what event ID and "source" are listed and let us know what they are.

Kenn J++

Read other 3 answers
RELEVANCY SCORE 60.4

I have a device which I'm having trouble installing the drivers reliably. It is a Siglent power supply and does not have any associated drivers from the manufacturer. It tries to install as a USB Test and Measurement Device which I think calls the ausbtmc.sys in the c:\windows\system32\drivers. This is all well and good and works fine if I do this using the USB Port expander...but if I try plugging the devices in directly, the driver can not installed. The device works just fine when using this driver, but I'm just at a loss as to why I can't point it to this driver directly when it comes up as an 'unkown device'. When I try to point it directly to...

C:\Windows\System32\DriverStore\FileRepository\ausbtmc.inf_amd64_neutral_cb428e1310c01373\ausbtmc.in f

C:\Program Files\IVI Foundation\VISA\IVI USB Staging\b841aa80\Windows

c:\Windows\System32\Drivers\ausbtmc.sys

and maybe one or two other places as well where this driver might exist. I either get a message saying windows found the best driver "unkown device" and installs it. Or I get an error saying..."doesn't contain a compatible software driver...make sure it is designed to work with Windows for x64-based systems."

I've even connected a new (never connected before) device and the same problem exists. Windows will find the driver and install it automatically from the port expander slots, but fails to install it when plugged directly into the PC.

I have been able to connect this de... Read more

Read other answers
RELEVANCY SCORE 60.4

Computer: Dell Inspiron 1525
OS: Windows Vista Home Premium SP2
 
Problem: It will not get nor install updates from Microsoft for the OS nor any other program
 
Steps Taken (so far...)
1) removed various programs and addons using Programs and Features, Add/Remove Program
2) removed old copy of Malware Bytes. Installed and ran new. removed problems found.
3) installed and ran CCleaner and fixed problems found and removed junk files found
4) tried automatic fix from this link: http://support.microsoft.com/kb/971058 Fails on installing Windows PowerShell. Says to try again later.
5) tried manual reset of windows update from the same link:
    a- appidsvc not found when trying to stop it in step 2
    b- 4 or 5 of the .dlls from step 6 are either missing or have problems when starting
    c- tried step 11 but it fails to load the latest version of the update agent.
 
I don't know if this is a virus or what.
 
Thanks for your time.

A:Windows VIsta Home Premium not allowing updates from Microsoft

first check your disk for errors
then run system file checker
then download and run the system update readiness tool
then download and run sfcfix
 
upload sfcfix.txt and C:\Windows\Logs\CBS\CheckSUR.log

Read other 1 answers
RELEVANCY SCORE 60.4

Hello,
I spoke with the VLSC and they told me that to be able to install ESUs onto windows 7 installations that we would need to do the following:

Purchase a single licenses of Windows 10 with software assurance to get imaging rights and downgrade supportReimage each windows 7 system in the curstomer environment with the volume license service center windows 7 image iso

I would expect the updates since they are basically downloaded from a portal to install on pretty much any current install of Windows 7.  Am I correct that we would be able to have the MSP (assuming they have software that can deploy the ESUs) push
out the updates downloaded from the ESU portal to our clients current Windows 7 OEM installs or is VLSC correct in that every system would have to be reinstalled with a new volume license image before the ESUs could be installed on the system?
Thanks!

Read other answers
RELEVANCY SCORE 60.4

I had a problem with Internet Explorer Has Stopped Working. The problem still exists. One of the steps was troubleshooting Windows 7. The troubleshooter showed that Windows Update was not registered. The troubleshooter supposedly fixed the issue. I went to check the settings and Windows Update settings now are to Install updates automatically. It is greyed out and you can't change it. There is a message at the top highlighted in yellow. Some settings are managed by your administrator. The User account is set as administrator and I can't change the setting. It was set to Ceck for updates but let me choose whether to download and install them.

I haven't found anything on this and I would like some suggestions or a fix. Below is my System Information.

Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM)2 Duo CPU E8200 @ 2.66GHz, Intel64 Family 6 Model 23 Stepping 6
Processor Count: 2
RAM: 5861 Mb
Graphics Card: Intel(R) Q35 Express Chipset Family, 256 Mb
Hard Drives: C: 74 GB (27 GB Free);
Motherboard: LENOVO, LENOVO
Antivirus: Trend Micro Internet Security, Updated: Yes, On-Demand Scanner: Enabled

Bill
 

Read other answers
RELEVANCY SCORE 60.4

Hi,
Two days ago I was surfing the web and my computer decided to close everything and reboot, but not before configuring updates without my permission which I think is what I had it set on. My first thought was that it was some kind of virus so I shut it down before they were installed (held down the power button).

In retrospect, this was probably a stupid thing to do because then when I started it back up I got the blue screen saying windows failed to start or something like that ("this could be a hardware/software issue" etc). Anyway after a few other things, I decided to just completely wipe it and start over as I hadn't backed anything up so I lost all my files and everything else.

Then, about an hour ago it happened again while I was in the middle of a game (just quit the game and started shutting down and installing updates without any warning that I could see). This time I just left it to see what happened and here I am. I looked at what had been installed in update history and there's a huge list including:

Update for windows Vista (25 of these)
Security update for windows Vista (50 of these)
Cumulative security update for IE7 for windows Vista (1)
Cumulative security update for windows mail for windows Vista (1)
Security update for windows media format runtime 11 for windows vista (2)
Security update for movie maker 6.0 for windows vista (1)
Security update for Microsoft .NET framework, version 2.0 (1)
Security update for Jscript 5.7 for windows vista (... Read more

A:Windows Reboots + installs updates without permission?

Welcome

You have to realize that we are not there, with the ability to look at the machine and the settings. May I suggest that you follow these instructions and make sure that you are on the proper settings
Windows Update - Windows Automatic Updating

and

Windows Update - Enable or Disable Automatic Restart - Windows 7 Forums

Read other 1 answers
RELEVANCY SCORE 60.4

I will start by saying I built the machine myself and originally I thought it was a ram stick, found one that I took out and the freezing stopped but it was the coincidence. It will freeze sometimes within 5 minutes or 1 hour. It is seemingly random. It will freeze with the full 16gb of ram and when i take out the stick with 12gb as well, and I figure its not the ram anymore and thats why I turn to you. I think it may be a software bug or something thats not installed. I have tried to install all the drivers that are out and the freezing happens sometimes when i go to install a program, download a driver, download a torrent, it seems during processes it just stops, screen locks up and it needs to be re-booted. Cant alt-tab, cant alt+ctrl+del or anything. Is there a program I can run to check everything? or a log or screenshots of a file or anything that you guys could use to diagnose? I'll get you anything you need, its frustrating that such a beautiful machine is freezing Also another thing that makes me think that its software rather than hardware is the fact that when i try to install windows updates they fail with an error 800B0100 and I have tried resetting the updater and running Microsoft tools and troubleshooters, nothings working.

Specs:
Windows 7 Home Premium 64bit
AMD FX-8150 Zambbezi AM3+ 8 core processor
16GB Corsair Vengence DDR3 Ram @668 Mhz 9-9-9-24
Asus M5A99X Evo SB910/950
Nvidia GeForce GTX560 2GB
Sata3 Seagate 1TB HDD
Sata3 OCZ Agi... Read more

A:My new windows 7 rig freezes during downloads, installs, updates

Work through these Troubleshooting Steps for Windows 7 starting with Malwarebytes scan, Clean Boot and SFC. Stress test your RAM for 5-6 passes or overnight.

Someone with expertise on RAM timing also needs to look at your settings there.

Read other 1 answers
RELEVANCY SCORE 60.4

I have encountered a Windows Update issue surrounding some Office updates (viz., KB2760411, KB2760583, and KB2760588). Update History records no installation failures ever and clearly shows these updates were successfully installed (current count 6 times). However, they constantly show up in the list of available updates, even after repeated reboots.

Have scanned with Malwarebytes Anti-Malware, using the latest database, and nothing was found.

Have executed Option 2 of How to Reset Windows Update in Vista, Windows 7, and Windows 8.

Have followed Windows Update Posting Instructions. Have executed SURT twice. SFC reports corrupt files it could not fix. See multiple failures reported in CBS.log (zip attached), but have no idea how to fix them.

Can someone point me in the right direction?

A:Windows Update Repeatedly Installs the Same Updates

You're not alone...










  
Quote: Originally Posted by derekimo


Yeah, a few threads here and on MS forums too,





Here we are again-Patch Tuesday





Updates Keep Reinstalling_no error





KB 2760411, KB 2760588 and KB 2760583 for Office 2007

Read other 9 answers
RELEVANCY SCORE 60.4

Craeted iamge for T520 Win10 and deployed, clients are trying to install windows updates repeatly when turnrd off, don't complete do to Write filter being on. What is the prefered method of diabling updates on a Win10 image? I would think the base image would have this pre configured?

Read other answers
RELEVANCY SCORE 59.6

I have a number of used Dell systems, mostly optiplex GX150, GX240, GX260 and GX270, as well as one brand new custom built machine.

There are at least 15 machines total, and on each one I've installed Windows XP Professional with SP2 on the disc. On each one, ALL or MOST of the windows updates will fail if I skip the SP3 installation. This isn't a problem as SP3 works fine on the Dell machines and they're being prepped to be sold anyway.

The problem is on the custom build. The customer specifically requested NOT to have Service Pack 3 on the machine. There are about 20 updates that fail on this machine. I've tried using Dial-a-fix to re-register dll's and restart services etc to no avail.

Any suggestions? These are all clean XP installs with no additional software other than device drivers.
 

A:Windows Updates fail on mulitple fresh installs

Visit my homepage and click on Fix Windows Update.
 

Read other 2 answers
RELEVANCY SCORE 59.6

So, I acquired this great gaming PC a few weeks ago, and everything was going great - then I decided to install a fresh version of Windows 7 x64, and when it came time to install the video card drivers, I've faced a series of crashes, and it has only gotten progressively worse. Since then, I've encountered BSOD during new installs of windows 7, almost during every windows update, and during most driver installs. I was tinkering around with the HDDs (unplugging, replugging), because I read that I needed to disconnect one to be able to install properly on the SSD.

Anyways, some of the errors I've been receiving are:

Page_fault_in_nonpaged_area,
win32k.sys,
System_sewrvice_exception,
0x00000050,
0x0000003b,
0x0000001e,
and 0x0000007f

I pray It's nothing that I have to go back in and physically tinker with, because I'm so afraid of just making things worse.

I don't know how to post those long logs of errors, so if someone can try to help out a TOTAL newb, I would be very greatful. I really didn't want to come here to ask for a handout, but I'm running out of hope.

some general information:
Win 7 x64
Intel i5-2500k
MSI Z77A-G45 Thunderbolt Motherboard
MSI R7850 Twin Frozr OC Edition Radion HD 7850 GPU


Please be gentle.

Thank you

Scott

A:Constant BSOD, windows updates, fresh installs, etc...

Please follow - BSOD Help and Support - Windows 7 Help Forums

Read other 1 answers
RELEVANCY SCORE 59.6

Ok over the past week or so windows has been installing the same 3 updates every night! Windows 7 Home Premium 64Bit

So I checked to see if they failed and they were installed successfully!

I have ran 3 different MS Fixit things to no avail. I have tried to update the PC manually however it does not go past 0% on installing the updates it just says preparing updates.

I tried adding 2 optional updates to make it 5 and manually clicking update however it sticks on 0% downloading updates.

I am usually pretty good at troubleshooting and fixing PC problems however this one I am defeated! I do not want to restore if possible, will this take away ANY of my files e.g work I have done I have never had to do it before!

However if someone can suggest a fix without having to restore that would be great!

Thanks in advance!
Ash

A:Windows Update - Installs Same Updates On Shut Down - 0% Stuck

Ok something new,

I tried some more fixes I found online I tried deleting the contents of the C:\Windows\SoftwareDistribution folder to no avail.

And also ran a program which reinstalled WU and all its .dll's etc.

Now I have a different problem it wont search for updates it says searching then stops and say error "8008005".

Tried disabling AV and FIrewall (Avast, Comodo and MBAM) and ran scans on all of those including SUPERAntiSpyware.

I only have one system restore from around 5 days ago when the updates were just reinstalling and i had no errors.

Should I restore to that or try and fix this error (which i have been looking how to with no luck!)

Thanks
Ash

Read other 9 answers
RELEVANCY SCORE 58.4

Hello!

I would have thought this a common problem, but all I've found on 3 pages of search hits and 5 pages in this forum is about upgrading from 32-bit to 64-bit (or vice versa). Still, I'll bet it's an easy one for you guys!

I have been trying to get Windows auto updates to stop telling me about updates I don't want/need (I don't use Outlook, but keep getting popups telling me to install updates for Outlook). While studying my current list of updates, I noticed that nearly all updates installed yesterday for MS Office 2007--7/11/12--say they are 32-bit. Here's what I'm running:

Dell Inspiron 620, Intel Cor i5-2320 CPU @3.00 GHz 3.)) GHz, RAM 6.00GB, Sys type 64-bit

Will my Office 2007 run okay?

And how safe & simple is it to upgrade from Windows 7 SP1 to SP2?

Thank you!
 

A:Windows installs 32-bit updates for Office 2007 on 64-bit Windows & PC

Read other 8 answers
RELEVANCY SCORE 57.2

I have a new T470p (type 20J6) with Windows 10 Enterprise x64 Build 16296 and System Update v5.07.0065. When I run System Update I am shown 11 optional updates. I select all these updates, click 'Next >' then 'Download'. The packages are downloaded and installed (9 successful, 2 could not be installed) then I reboot the laptop. If I then run System Update again I am offered exactly the same 11 optional updates. I've been through the entire process 5 or 6 times now. How can I 'reset' System Update so it doesn't keep offering me the same updates which it says have been successfully installed? UPDATE: If I install and use the 'Lenovo Companion' app and select 'System Update' from there I am told 'No updates are available. Your system is up to date'.

Read other answers
RELEVANCY SCORE 57.2

I have automatic updates disabled; I also disable windows update and bits and allow it to run only once or twice a week; On an off chance I had forgotten to disable windows update for two days, it automatically installed an update even though automatic updates
was confirmed disabled and set to "check but do not download."  This suggests Microsoft or a MITM may be capable of pushing unwanted updates or worse.
I suspected that Microsoft and affiliates working with the NSA, DoD, Israel, and or the US and possibly other foreign governments are testing to see it if were possible to run an update with the future intent of injecting malware. I have since disabled automatic
updates and run them only at my own leisure. It is every first or second Tuesday of each month that windows releases their monthly security rollups, providing little reason to leave automatic updates on 24/7. With windows update's history of malfeasance, collusion
and security risks I recommend all security conscious users do the same. 
It would be nice to see a script for accomplishing this automatically, if anybody could provide details on how to do this, that would be much appreciated.


https://www.youtube.com/watch?v=XWn4TXKgidw

Read other answers
RELEVANCY SCORE 54.4

I have been trying to download updates, any updates, and I keep getting stopped due to the publisher not being allowed. This includes Microsoft! I'm not savy enough to have changed anything. What can I do?

A:IE not allowing any updates

first check your "anti virus" properties......make sure you did'nt turn off the "automatic updates"..............this is the primary cause if you are not able to download any updates.

Read other 2 answers
RELEVANCY SCORE 54

I suspect a virus here. My laptop is not updating AVG8.5. If I doubleclick on AVG, it says that my antivirus/antispyware database is outdated, and it also says under update manager "access forbidden". Automatic updates and manual updates both prohibited. When it tries to automatically update, the error says "access is prohibited by the server". Please offer advice or troubleshooting. Thanks in advance....LSPSWR
 

A:Laptop not allowing AVG updates

Please click here to download and install HiJackThis. Once you run a scan, don't click to fix anything yet.
 

Read other 2 answers
RELEVANCY SCORE 54

Evening

New to the forums so go easy on me!

I have a Compaq desktop running Windows XP that basically would never load the task bar, I could open a window by doing CTL ALT DEL and start new task, but I could never get the task bar back to do anything. Also couldn't back up any photos or run virus checker. I purchased a USB HD caddy so now have backup up everything I need and have done a full system restore (fully destructive) so everything is wiped and windows has re-installed from the partition.

Managed to get rid of the pre-installed Norton, tried it install Kapersky but won't let me as need SP3. Tried to run updates but I get onto the MS website then get an error everytime is searches for updates. I tried downloading SP3 on another computer and then installed it via USB memory, but once installed and reboot, it now just loops on the boot screen, over and over again. Before I even tried to get the updates, I was getting all sorts of security certificate warnings on every website I tried to go on, and some times it wouldn't even let me onto the internet, despite being connected by LAN.

What am I doing wrong? Is there a problem with getting all the updates for XP now?
 

A:Solved: XP not allowing updates

Read other 13 answers
RELEVANCY SCORE 53.2

Hi,

I wonder if anyone could advise whether the following updates would affect my internet connection:???


Update for Windows Mail Junk E-mail Filter [June 2008] (KB905866)
Definition Update for Windows Defender - KB915597 (Definition 1.35.347.0)
Windows Malicious Software Removal Tool - June 2008 (KB890830)
Security Update for Windows Vista (KB951376)
Security Update for Windows Vista (KB950762)
Update for Windows Vista (KB947562)
Security Update for Windows Vista (KB951698)
Cumulative Update for Media Center for Windows Vista (KB950126)


I downloaded these yesterday and I have had problems with my wired modem and Netgear router today. I keep losing the internet connection. I've spoken to my ISP and Netgear. Netgear says that the modem keeps dropping the connection but my ISP says there are no problems at their end. It just seems odd that everything was working fine before I allowed these updates.

If anyone can advise, that would be great. Thanks for your time.

A:Internet Problems After Allowing Updates

I too have had your problem mate. I noted that the following update stopped my system accessing the internet...

Definition Update for Windows Defender - KB915597 (Definition 1.35.347.0)

It also caused my web browsers to act strangely. As soon as I used system restore to go back before the update everything went back to normal again! After this, I stopped Vista automatically updating without my knowledge so that I could stop this update from installing. The only thing is, I have now noticed that the update above has since installed twice over ( according to my update history ) and I never told it too!! Also, I am now being told that THAT update is available for download!!?? What?
Well bizzare stuff at the moment.

Read other 9 answers
RELEVANCY SCORE 53.2

Hello,

I am having a problem with trying to upgrade a PC from IE 9 to IE 11. I am doing an offline upgrade of IE 11 on a Dell OptiPlex 3010 with a fully secured patched Win 7 SP1 (32-bit) OS. This PC was using IE 9 due to several incompatible sites that the user needed to get to that wouldn't work in IE 11 but they now need to upgrade.

When I run the IE 11 install executable it acts as if it is downloading setup files and patches but then stops a minute or two in with a message that "You need to install some pre-requisite updates in order for IE 11 to install". It then takes me to a TechNet article describing what updates are needed. They're the following:
KB2729094
KB2731771
KB2533623
kb2670838
kb2786081
KB2834140
I had downloaded each update, copied each update to the desktop, and ran each update. Some came back as already installed while other's came back un-applicable. I believe two of the updates did actually need to be installed. So after trying all six I attempted to run the install again and was again told that there are pre-requisite updates that need to be installed. I also tried a reboot, did the same thing.

I had also tried this on another 3010 Win-7 32-bit PC that needed upgraded to 9 and it had worked fine. IE9 was upgraded to 11. So I am not sure what other updates I could need or why this wouldn't work on this particular PC. Any help would be greatly appreciated! Thanks!

A:Pre-requisite updates for IE 11 not allowing me to update

Our Windows Update expert will need this tutorial done on the troubled computer.

Windows Update Posting Instructions

Read other 1 answers
RELEVANCY SCORE 53.2

my pc wont let me install any anti virus programs. i have a legitimate copy of Windows Vista Home Premium and it wont let me install microsoft essentials or mcafee. i am currently unprotected and windows defender or windows itself will not update. i am also being prevented from removing certain programs. HELP!!!!!!!!!!!!!!! THANK YOU IN ADVANCE.

A:no installs or updates

Hello,And welcome to BleepingComputer.com, before we can assist you with your question of: Am I infected? You will need to perform the following tasks and post the logs of each if you can.Malwarebytes Anti-MalwareNOTEMalwarebytes is now offering a free trial of their program, if you want to accept it you will need to enter some billing information, so that at the end of the trial you would be charged the cost of the product. Please decline this offer, if you are unable to provide billing information. If you want to try it out, then provide the billing information.Please download Malwarebytes Anti-Malware and save it to your desktop.Download Link 1Download Link 2MBAM may "make changes to your registry" as part of its disinfection routine. If using other security programs that detect registry changes (ie Spybot's Teatimer), they may interfere or alert you. Temporarily disable such programs or permit them to allow the changes.Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.
For instructions with screenshots, please refer to the How to use Malwarebytes' Anti-Malware Guide.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program bef... Read more

Read other 1 answers
RELEVANCY SCORE 53.2

http://www.bleepingcomputer.com/forums/topic405604.html

78 views and no reply. thanx in advance for any help you can give me.

A:no installs or updates

Since you are already receiving help here, please continue in that thread. Do not start new threads or duplicate topics as this causes confusion and makes it more difficult to get the help you need to resolve your issues. Further, it necessitates staff spending time with housecleaning to remove those duplicate postings...time which could have been provided to others needing assistance.Thanks for your cooperation.This thread is closed. If you have any questions, please PM me or another Moderator.

Read other 1 answers
RELEVANCY SCORE 52.8

Hello and thank you so much for your time.

I am running Windows XP (tell me how to find other info if you need more)
I believe with SP2, not sure on that part though

My current problems are I am being redirected a lot, although not all the time. My Antivirus programs are not updating, I currently have Malwarebytes, SUPERantispyware, AVG, Avast!.
Firefox is constantly crashing. Sometimes you will have it crash 4 to 5 times before google will even pull up.
I am also getting a Windows32 error, I'm sorry I didn't copy what it said down before sending an error report.
My system is bogging down very easily. I'm used to running multiple windows at a time but lately if you have more than one up you can just forget it.
I downloaded google chrome to see if I it would work better than firefox or IE, it shows that it downloaded just fine but nothing pulls up. At all, it won't even let you do anything.

I think that is it.

My HJT log
R3 - URLSearchHook: Yahoo! Toolbar - {EF99BD32-C1FB-11D2-892F-0090271D4F88} - (no file)
O2 - BHO: HP Print Enhancer - {0347C33E-8762-4905-BF09-768834316C61} - C:\Program Files\HP\Digital Imaging\Smart Web Printing\hpswp_printenhancer.dll
O2 - BHO: Adobe PDF Reader Link Helper - {06849E9F-C8D7-4D59-B87D-784B7D6BE0B3} - C:\Program Files\Adobe\Acrobat 7.0\ActiveX\AcroIEHelper.dll
O2 - BHO: WormRadar.com IESiteBlocker.NavFilter - {3CA2F312-6F6E-4B53-A66E-4E65E497C8C0} - C:\Program Files\AVG\AVG8\avgssie.dll
O2 - BHO: SSVHelper Class - {761... Read more

A:Redirects, Not allowing anti-virus updates, more

Read other 16 answers
RELEVANCY SCORE 52

I have been running with PCs since CPM, and have gotten away from many a blue screen...but this one is tough.
Usually I think I run a tight ship, with SafeXP but....

OS: WIN XP SP3 Prof.Ed.
Avast free
Disconnected from network.
Backed up, Console installed, Registry backed up.

Logs:
GMER works,
DDS does not, even DDS.htm or .scr. Even in Safe mode. Logs posted. "This tool does not support your Operating System" bogus error. Hijaak This file supplied.


Symptoms:
Security logs initally were full of a svchost service accessing the internet by disallowed of high port number. Searched but nada. The trouble seemed to get nasty when IPv1.6 was added by a MS update. It seems the raccoons figured out how to make a tunnel under the Network Service, so that the network icon in the taskbar was not blinking when I was accessing the network. PC disconnected.

Novell Netware was spontaneously installed but I defeated this and removed IPv1.6.
It looked like the network was sent to a filtering site, and then to the address of interest.

RKill helped get the Network Service behavior back. Now it shows I am disconnected.

Symptoms:
Avast intially reported rootkit in locater.exe (replaced with clean copy but no effect).
Many boots have a dirty byte set so CHKDSK.exe runs on C drive.
RKill reports many fake error messages but does not find anything in the log when it finally runs. It did work though.

Clear selective blocking of executables .exe,.scr,.htm with fictici... Read more

A:Nasty Rootkit, no updates, no installs.

OK, I read the instructions on Kapersky TDSSKiller, downloaded latest:

Both the TDSS.exe versions came up blank on Alureon.

So this would seem to suggest the virus is not Alureon-related or a new version.

Still a lot of CHKDSK activity...wondering if this CHKDSK file could be corrupted?

RKill clearly shows hilarious bogus MS errors.

Bootkit?

N.

Read other 47 answers
RELEVANCY SCORE 52

Hi all,

On more than 1 occassion I have been offered an update immediately after I had successfully installed it (as confirmed in update history). I would venture to say that in about 50% of the times the update is no longer offered a second time after I reboot(whether or not instructed to by Vista). However, that still leaves me with plenty of occassions where I have to install the same update 2 or 3 times to be sure "it took" and the fact that this happens at all lol

Thanks in advance for your help!

A:Updates keep getting offered after successful installs

Hello Viviand,

Welcome to the Vista Forums.

Next time that happens, instead of downloading and installing the updates again, try clicking on the check for updates button on the left of WU. See if this updates WU or still finds that you need the updates.

Gary

Read other 2 answers
RELEVANCY SCORE 52

Hello; I hope any1 could help me with this error;
E: Sub-process /usr/bin/dpkg returned an error code (100)

that's all i get every time i try to install or upgrade. This started when i did an upgrade on my ubuntu box; now i dont even have sound and I can update or install anything without getting this:

E: Sub-process /usr/bin/dpkg returned an error code (100)

HELP PLEASE
 

Read other answers
RELEVANCY SCORE 52

When I get ready to shut down it gives me the option to install updates everytime I get ready to click the shut down but and it didn't do this before.

I have a screen shot of what happens when I get ready to shut down...It's always on update 1 of 1. I thought it would eventually finish updating, but it must be a glitch or something. It's been going on for about a week. Help please, thanks in advance.

A:My computer installs updates 1 of 1 when I shut down.

Welcome Caramelfyneqt.

It would be helpful if you knew what update this is trying to install? Perhaps going to Windows Update on your computer and try to find out what update it is trying to install?

That said, perhaps this will fix your problem :- How do I reset Windows Update components?

Read other 11 answers
RELEVANCY SCORE 51.2

Hey:
 
There are 4 options to set MSE updates.
 
I have MSE updates set to: "Download updates but let me choose whether to install them."
 
But MSE with no warning, decides to start downloading and installing updates, and automatically shutdowns which requires a restart.
 
This usually happens when I walk away from the computer for a few minutes. I come back and the update already installed and shutdown, which requires a restart.
 
The problem with this is if I have open programs on the screen or processor work I am working on. The download installs and then shuts down, and I have to restart the computer. This wipes everything off the screen. Sometimes Firefox saves the open programs, sometimes it doesn't.
 
Most importantly to me, is the shutdown/restart doesn't save whatever I was working on the word processor. Which if you worked for 2-3 hours on a project and it disappears because of the shutdown, is not good a good thing.
 
So what's the trick to setting MSE so I can control the download/installation/shutdown/restart thing? So I can save my processor work beforehand?
 
Thanks in advance for any help.

A:I have set MSE updates for manual install, but it auto installs anyway?

Hi
 
Not recommended, but you may wish to change your Windows Updates to a similar setting.

Read other 27 answers
RELEVANCY SCORE 51.2

As a lot of people are experiencing a problem with new installs not updating, judging by the number of new threads on this issue, to save a lot of people a lot of hassle, you may simply have to wait a few days for automatic updates because new Win10 installs updates are taking priority.

Here's a tip to the mods/gurus etc. If you see someone start a thread with these problems, just tell them they may have to wait a few days. Even better, create a Sticky about this issue. You'll make life much easier for yourselves and spare others a lot of hassle. Very simple.

Read other answers
RELEVANCY SCORE 51.2

I tried installing admuncher and update to Acrobat Pro 8.0. With Acrobat, when I select update from the help menu nothing happens. I figure this must be avg av software, or a win 7 security feature that is blocking program installs+updates (my guess it is more likely Win 7). I don't know where to start to solve problem. Only account on Win 7 is my admin account.

A:(avg or) win 7 security blocking program installs+updates

It could be a security setting or an addon in your browser.

Read other 3 answers
RELEVANCY SCORE 51.2

Shortly before christmas I dropped my laptop and damaged the HDD. I had to get it replaced and have windows reinstalled etc.

Now there are a lot of little things acting up, and I'm thinking it could be because supposedly important updates aren't installing.

I still get the sign next to shut down on the start menu, which suggests updates will be installed, but they're constantly coming up as failed.

This is my update history, and the highlights ones are commonly failing.

Any ideas?

EDIT: Oh, and the error codes are all 8E5E03FB if that helps.

A:Since 'fix', laptop no longer installs important updates

Please follow the Windows Update Posting Instructions and post the requested data.

Please also post an MGADiag report - repair shops have an 'unfortunate' rep with reinstalling the OS.
we need to see a full copy of the report produced by the MGADiag tool
(download and save to desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
Once saved, run the tool.
Click on the Continue button, which will produce the report.
To copy the report to your response, click on the Copy button in the tool (ignore any error messages at this point), and then paste (using either r-click/Paste, or Ctrl+V ) into your response.


Please also state the Version and Edition of Windows quoted on your COA sticker (if you have one) on the case of your machine (or inside the battery compartment), but do NOT quote the Key on the sticker!
How to Tell

Read other 9 answers
RELEVANCY SCORE 51.2

Just did updates today, 1 important and 4 optional. Have not researched yet which one exactly but one of those put GWX back on my PC despite having previously disabled OS Upgrades through group policy. When I checked my group policy is was set back to "Not Configured".

KB915597
KB2952664
KB3102429
KB3035583
KB3112148

Edit: Seems like KB3035583 and KB2952664 are the culprits.

Read other answers
RELEVANCY SCORE 51.2

Pretty much, every time I shut down my computer it "installs updates 1 of 1". I've installed it 3 or 4 times a day for the past few days and it just won't stop now. When I check Windows Update, the last 15 or so items have all been "Security Update For Windows Vista KB981852, Status: Successful, Importance: Important".

So apparently, all the installations have been successful, but it still won't quit. Does anyone have any idea what I should do? Thanks a lot!

A:My computer installs updates every time I shut down

I would let it Update Eventually it will Stop you may want to check for updates and install them manually by going to Start>All Programs and Selecting Windows Update

Hope This Helps,
Josh

Read other 3 answers
RELEVANCY SCORE 51.2

Hi all,

I do a lot of consulting in my spare time to home users. I often end up getting their computers secure and ready for use. I was wondering if anyone knows of a program that is intelligent enough to scan the system and apply windows updates as needed performing reboots, and resuming installation.

Basically I am looking for a standalone utility that can perform these actions until windows is completely patched. I have seen proprietary solutions for this that companies like Geek Squad use and was wondering if there is a commercial solution that provides similar functionality.

I am not interested in a program that collects updates and downloads them for building into images or SXL, but a nice little app that connects to microsoft and downloads the needed updates and restarts as needed.

If anyone has heard of any such solution I would be most interested in hearing your feedback.

Thank you!
 

A:A program that searches for updates installs and reboots

Read other 11 answers
RELEVANCY SCORE 51.2

I am running Windows 7 and every time I shut my computer down, I get "Please do not power off or unplug your machine. Installing update 1 out of 4. . .," which takes about 7 minutes or so before it will shut down. It has ben doing this for months. It is clearly installing the same updates over and over again. I can shut it down, let it install the updates, restart and shut down 5 minutes later and it does the same thing. Any suggestions on what I can do to prevent this? Thanks!

Read other answers
RELEVANCY SCORE 51.2

I've started noticing this recently and I don't know whether it has to do with an Update that was pushed through which changed the way Updates are delivered into new installs, or whether the slipstreaming method used in Update 7 installation media is fouling out Updates actual delivery. Let me describe what happens to see if anyone else recognizes it:

Updates are set to Automatic choosing "Use Recommended Settings" or "Install Important Updates" during the OS install so are presumably downloading in the background as soon as the new install gets online.

Then doing a Check For Updates begins an endless loop that may not resolve at all until one notices that there is a yellow ! on the Shutdown button which begins install of a large group of Updates. Today it was 189. So I shutdown and these tick through the entire 189 but at restart quite a few are logged Failed. So I again Check for Updates and this time it says 72 available, but when I select them and start their download, it again stalls at 0% - the tray icon agrees. Soon the yellow ! appears on Shutdown button again and I shut down to see 72 Updates appear to be installing.

The past few installs where this has happened it was a daylong struggle to get them all in. But they eventually all were installed and I could then choose the Optional - which tells me that Important are self-installing without regard to User input. If I had have waited they may have all installed at once queued by th... Read more

A:Strange behavior of Updates during recent installs

They should just come out with a Service Pack 2 already for 7, but I guess we all know that won`t happen.

You should always set it to ask me later, then to inform you but let you decide.

Read other 9 answers
RELEVANCY SCORE 51.2

What do you guys recommend for this purpose? Anything to avoid?

A:Tool to monitor all your installs applications for updates?

Originally Posted by x509


What do you guys recommend for this purpose? Anything to avoid?



You could try:

PowerShell PackageManagement (OneGet) - Install Apps from Command Line - Windows 10 Forums

I do not use native or 3rd Party software managers, but have been tempted to implement the PowerShell solution. I tried it for a while, but my software collection is not that big. The good thing is that the above solution has most, if not all, of the software I use (it is a canned package, but you can build your own repository and add other software)

Read other 2 answers
RELEVANCY SCORE 51.2

This malware problem started with my google searches being redirected to ads. In the last day, advertisements have started popping up on any Firefox page, and internet explorer is opening up 40-100 pages! I tried to install spybot, but it will not install because of the virus, nor will windows defender update. Please help!

DDS (Ver_09-03-16.01) - NTFSx86
Run by Rich at 18:42:49.97 on Mon 05/11/2009
Internet Explorer: 7.0.6000.16575 BrowserJavaVersion: 1.6.0_13
Microsoft? Windows Vista? Home Premium 6.0.6000.0.1252.1.1033.18.1918.968 [GMT -4:00]
============== Running Processes ===============

C:\Windows\system32\wininit.exe
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\svchost.exe -k rpcss
C:\Windows\System32\svchost.exe -k secsvcs
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\svchost.exe -k netsvcs
C:\Windows\system32\SLsvc.exe
C:\Windows\system32\svchost.exe -k LocalService
C:\Windows\system32\svchost.exe -k NetworkService
C:\Windows\System32\spoolsv.exe
C:\Windows\system32\svchost.exe -k LocalServiceNoNetwork
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDevi... Read more

A:Vitus/malware not allowing updates, changing google searches to ad links

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.comDDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the resul... Read more

Read other 2 answers
RELEVANCY SCORE 50.8

In December I noticed every time I booted my computer (Toshiba Sat A665) it had Windows updates to install. Eventually this got my attention and I found that windows update was downloading and installing the same 5 updates "successfully" over and over again. It was also downloading and unsuccessfully trying to install internet explorer 11 as well, giving error code 9C57 (I'm pretty sure that the IE 11 error is because some of the required updates needed for IE 11 are not installed, which I believe is due to my first problem, that the same updates are download over and over again). If I hide any of the updates, this causes new updates to appear, which also download and install successfully, over and over again.

I have tried many of the solutions offered by Microsoft and a few that I saw on this forum without success, such as running "Reset_Windows_Update_Full.bat". Fortunately, while I did not see the "Never, under any circumstances, follow the instructions posted to another user who appears to be having the same problem as you" warning until after I had done exactly that, I had made a full backup of my system. So I am able to revert back to a few days ago where I had only tried Microsoft solutions if necessary. Here are some pics of what Windows update shows me in a typical session, in order.

I have since followed the instructions on this forum and have run the System Update Readiness tool and the SFC scan. I will attach my ... Read more

A:Win 7 home premium sucessfully installs the same updates repeatedly

Here are my log files and a shot of the SFC scan results...

Read other 9 answers
RELEVANCY SCORE 50.8

Windows 7 x64.  Generic image on Latitude E7470s with up to date BIOS and drivers per Command Update and manually installed drivers.
Recently we've gotten a rash of about 20 systems that as they've been getting updates for Dell drivers their systems crash with BSOD APC_INDEX_MISMATCH multiple times per day.  We've tried removing the currently installed drivers manually and then reinstalling current drivers but it does not seem to fix the issue.  Has anyone else seen this?  I'm pasting the output from our .DMP output in the Debugger. What I'm confused about is the process: audiodg.exe  This is a Windows system file and not part of the Realtech driver.
Microsoft (R) Windows Debugger Version 10.0.16299.15 AMD64Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\user\Desktop\user\112817-15194-01.dmp]Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: srv*Executable search path is: Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64Product: WinNt, suite: TerminalServer SingleUserTSBuilt by: 7601.23915.amd64fre.win7sp1_ldr.170913-0600Machine Name:Kernel base = 0xfffff800`0320e000 PsLoadedModuleList = 0xfffff800`03450750Debug session time: Tue Nov 28 11:08:18.113 2017 (UTC - 8:00)System Uptime: 1 days 16:50:22.976Loading Kernel Symbols........................................................................................................................ Read more

Read other answers