Over 1 million tech questions and answers.

VR BOX iPhone 5S fitting help

Q: VR BOX iPhone 5S fitting help

Firstly, sorry if this is the wrong section. An administrator can move this thread somewhere appropriate if they wish. I'm new to this website and I'm desperately looking for help somewhere about my headset which I recently bought.

So, I just picked up a headset called the VR box. Everything is fine, but my iPhone 5S just won't fit. I've placed it inside the holder for the phone but the only thing to hold it that I can find it is a slider at the top, leaving lots more room where the phone is too small to fill causing gaps. These gaps keep making my phone slide out and fall causing a bad VR experience meaning I can't use the headset.

What can I do to fix this? I've tried using it while keeping it in place, but when I look in the headset the view is bad and I can see the top and bottom of my phone, I've tried refocusing it and adjusting the lenses but nothing seems to work.

Anyone able to help? Thanks.

IMAGE:

RELEVANCY SCORE 200
Preferred Solution: VR BOX iPhone 5S fitting help

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: VR BOX iPhone 5S fitting help

Looks like you bought the large size.

The small one works with Galaxy S5 and HTC One. 5.1" and 4.7". The iPhone 5S is 4"

Read other 1 answers
RELEVANCY SCORE 45.6

I am running Win7/Pro x64. My System Spec is in my Profile.

I do not have iTunes installed on my desktop. I do have an iPhone 5, a hand-me-down from my son.

Yesterday the phone needed to be charged. I attached it to a USB port. I was asked by the phone if I trusted my desktop. I said yes. I was told that there were no new images on the phone to import, a fact I already knew. I've encountered this dialog before. It seems to be part of the procrustean Apple way of computing.

What troubles me is that a process started about the time I plugged in the phone. At a rate of 5-10 files/sec the 'modified' date was changed on over 3,500 jpg files on my data drive. I've not analyzed the order in which they were processed but suspect that it was A-Z on the file names and also on folder names.

Could this behavior result from iTunes running its 'sync' process? If so, is there anything I can do to prevent it from happening again?

If we have no Apple OS experts on this forum, does anyone know of an 'Apple forum' that is as respected as sevenforums is in the Windows world?

thanks

baumgrenze

Read other answers
RELEVANCY SCORE 45.2

I just got the new iPhone 4S and I have a 3GS as my old phone with no way to transfer my contacts. I was told I could save a backup of my 3GS to itunes, then load the backup onto my 4S.

Well my 3GS won't backup, it keeps saying "iTunes could not backup the iphone because an error occurred" without any error code. I've wiped my old backup, I've cleared sync history. I'm using a PC with itunes with the latest itunes version 10.5.

What can I do to get my contacts over to the new phone?
 

A:Error backing up iPhone - trying to transfer contacts to new iPhone 4S

You may have to load them one at a time.
 

Read other 1 answers
RELEVANCY SCORE 45.2

How to make your own iPhone Ringtone and transfer it to your iPhone directly?
 

A:How to make your own iPhone Ringtone and transfer it to your iPhone directly?

Here's a paid one....
http://www.iphone-ringtone-creator.info/
Seems to be a few listings.
Google search.
 

Read other 1 answers
RELEVANCY SCORE 45.2

I already have a home security camera system. What I'am looking for is software I can put on my desk top that will notify me on my iphone when motion detection is activated. As well as allow me
to monitor the cameras from my iphone.

Read other answers
RELEVANCY SCORE 42.8

I am trying to get my SMS,contacts and pictures on my iPhone to be put either onto my computer or onto iTunes and I don't know how to do this.
Any help or advice would be greatly received.
Thanks in advance.
Could you suggest a transfer???
 

A:How can i backup iphone 3GS sms/contact to new iphone 4?

Cucusoft iPhone Tool Kits can also transfer Music/Video from your iPhone, iPad or iPod Touch to your computer.

Backup Photos to Any Folder on Computer
Backup SMS to to Computer with Multiple File Formats
Backup Call List to Computer with Multiple File Formats
Backup Contacts to Computer with Multiple File Formats
iPhone Disk & file Utilities

 

Read other 1 answers
RELEVANCY SCORE 40.4

Is there a way that I can sync my Outlook contacts with my Iphone 4s so that the contact appears as displayed by outlook.
Example: Mr. Richard Jones
FILE AS: Rich Jones

This is the option to display in outlook and I would prefer to display on phone the same.

A:Sync Outlook with Iphone display in Iphone name from outlook: FILE AS:

Hello. I have an android phone which is synced with my gmail account. I have eyed the new iphone 5 and will soon be moving data and contacts from my android to my iphone.

Before migrating to the iphone and mess up something with my contacts, i want to sync all to my outlook. So I wish to achieve sync from Android to Outlook and then from Outlook to the new iphone - is that possible?

Read other 2 answers
RELEVANCY SCORE 39.6

How can I check to see which I have?
I was looking into the "Siri" service, and don't see it.
Recently upgraded to the OS5. Does that matter?
Thanks.
 

A:Solved: iPhone 4 or iPhone 4S

Check for the Model number under Settings > General > About

From what I've read on the Apple forums, if you have the iPhone 4, it won't support the Siri integration.
 

Read other 3 answers
RELEVANCY SCORE 38.8

So I have started modifying and getting new components for my PC, and I have a fanless ATI Radeon hd455x. When the card is plugged into the PCI-E slot (Which I Believe supports 16x, 8x, 4x and 1x) and use a DVI to VGA Adapter to attatch to a monitor (Hanns-G HU196D) nothing appears on the display. I believe my power supply is sufficient enough as I changed the standard 305w powersupply to a 450w powersupply. The PC itself was originally a DELL Optiplex 745 minitower.
I Also have a 128 mb ATI Radeon X300 that works just fine with ATI's Legacy Radeon drivers.
Please Help.

Read other answers
RELEVANCY SCORE 38.8

If I want to replace my hard drive, will it come with any operating system installed or do I need a cd? Can I make a copy of the os from my existing HD & install that in the new one?
 

A:fitting new HD

Read other 12 answers
RELEVANCY SCORE 38.4

I've recently put some more RAM into two systems.
The first system is a AMD 300mhz/ PCi S3 Virge Gfx card which had 32mb and has now been upgarded to 128mb. The board for this machine is a J-542B which is 100mhz . The RAM I put in was PC133! It is running fine and there doesn't seem to be any problems.
The question is: Should I have to assign this RAM in the BIOS or is it simply a case of put it in and away we go?

The second machine is an AMD 550mhz/ AGP Ati 8mb Gfx card. This has been upgraded to 224mb from 64mb. The board for this system is an ATX AL9 which again is a 100mhz board and the RAM I have put in is PC133. This machine is slower than the above system. It has Office 2000 on it (The 300mhz doesn't), would this software be enough to make it slower than the 300mhz system?
 

A:Fitting xtra RAM

Read other 7 answers
RELEVANCY SCORE 38.4

i was wondering if anybody knew of a program that will allow me to put over an hours worth of music on a regular cd-r that i can play on any cd player? I guess it will be some type of program that compresses .wavs to fit on a regular cd, I have not been able to track down one and would appreciate any suggestions. Also free is better but not required.

Thanks
 

A:fitting music

Read other 9 answers
RELEVANCY SCORE 38.4

I have just got a new cpu, my stupid question of the day is: Can i use the same heat sink and fan? so in other words do i just need to buy some of that thermal heatsink paste to put my new cpu in?
 

A:Fitting CPU question

Read other 16 answers
RELEVANCY SCORE 38.4

Okay, I'm feeling like an idiot right now. I ordered an ASUS P4S800D-X ATX mobo the other day. It arrived today, and I, jumping up and down like a little kid, proceeded to tear open the box. And here's what I found:

The stupid mobo doesn't fit the shell. That is, it doesn't fit the mounting holes, or the back plate.

I don't know if the case is ATX or micro or mini or whatever. I do know it's a mid-tower, but I've seen that some mids are compatible with ATX. I have no idea how to tell what's compatible, just by looking at the dull-gray metal.

My questions--for there are two:

1. Other than looking for 'ATX', is there something I need to know about to make sure the mobo and case are compatible?

2. While I'm trying to figure out what to do next, is there some way to rig up a mount for the mobo so I can test it?
 

A:fitting the mobo

Read other 10 answers
RELEVANCY SCORE 38.4

Hello,

I got these RJ45 adapters off amazon for a few quid as I needed to fit one to a network cable an electrician installed and didn't finish the job.

I've got all the wires in however there are little metal bits sticking up at the end which stop it from fitting into the router. Its the same on all of them. I've tried pressing them down but they won't budge.

Its says they are for networking.

http://www.amazon.co.uk/Connector-N...1?ie=UTF8&s=electronics&qid=1233409714&sr=8-1
Thanks
 

A:Fitting RJ-45 adapter help

Read other 7 answers
RELEVANCY SCORE 38.4

I am going to fit an Athlon 64 processor for the first time and I would like some advice.
Do I need apply Thermal Paste before I fit the heat sink, or is the pad on the bottom of the heatsink all thats needed.
Thanks
wallie
 

A:Fitting Processor

Read other 9 answers
RELEVANCY SCORE 38.4

My PSU has a warning on the side of the box saying "Not Recommended for those PC cases that require the PSU to be inserted from behind the case instead of the side of the case. Also this is the case am thinking about getting. So do you think my PSU will fit inside of this case from the side? http://www.anandtech.com/casecooling/showdoc.aspx?i=2187&p=3
 

A:Fitting PSU into case

Well, the one in the link fits in from the side, so I guess your will be fine. However, without a pic of the PSU, there is no real way to tell.

Scorp.
 

Read other 3 answers
RELEVANCY SCORE 38.4

This forum is truly a blessing! The layout is simple and sophisticated and the wealth of information is almost overwhelming. I'm relatively new to this board but what I have discovered seems to be a great acheivment. Having browsed the forums for some time, I have also noticed that the members in this community are very friendly and dedicated to helping one another. The admin's and moderators are all very helpful and seem quite knowledgeable in regards to technology. I would just like to say I am happy to be a part of a grand community!

A:A fitting Introduction...

Welcome to the forums Blazinstang

Read other 8 answers
RELEVANCY SCORE 38.4

I am attempting to build a machine, I have a FIC CL31-A (new)motherboard with a Celeron 500 chip.The problem is, that when I have connected the PSU to the board and the power switch and speaker i expect the usual beep but in this case the fan starts up
and stops in a few seconds,now I have substituted with a different board and another chip and I still get the same result,am I doing anything wrong
 

A:Fitting a Celeron 500 cpu

Read other 7 answers
RELEVANCY SCORE 38.4

Hi Gang.

I've just purchased a Pioneer DVR-107D DVD Burner. I wish to keep my existing CD Burner as well. The burner came with instructions on how to fit it but not the wiring of the damn thing.

When both my burners are connected the computer refuses to load up to the windows page.

But with one disconnected it works fine.

Could someone point me in the right way for a web site that may help? Or if anyone on here could help me out?

Is it to do with the Bios set up? Thought i'd better ask before messing around with it.

I'm now sitting here waiting for a reply.... so please be quick...

Thanks Gang
 

A:Fitting a further writer

If it's a IDE drive then set it up in the BIOS. If it's a SCSI drive, then set it up throught SCSI with it's own ID number.
 

Read other 3 answers
RELEVANCY SCORE 38.4

Hello again..

I've been working for the last couple of weeks transfering some of my VHS tapes to DVD. The most I've been able to fit on a 4.7 GB DVD is about 1 hour and 10-15 minutes. The image is not as clear as the original VHS when playing thru the TV. The DVD says it will hold "120 minutes of video".

What am I missing in the conversion from analog to MPEG that causes the file to be too large to fit on 1 DVD? Am I correct in using the 720 x 480 DVD MPEG setting? Is that overkill for VHS quality and perhaps causing some of the "pixelation"?

I'm using an ATI all-in-wonder 7500 with a 1.6GHz P-4 processor and a Memorex DVD burner.

The ATI came with U-lead Video Studio 5.0 which works very well for editing.

The Memorex came with PowerDVD, MyDVD, ArcSoft ShowBiz, and Nero. The ShowBiz software is the only program that allows me to transfer the edited MPEG to DVD. No matter what I load into MyDVD, it says the file is too big.

If anyone can help me with suggestions on what settings I could change to get a 2 hour VHS to fit on a 2 hour (4.7BG) DVD, I would appreciate it.

I've done a lot of looking on other sites, but have yet to find the answers.
Thanks in advance for your help...
 

A:Fitting 2 hour VHS on 4.7GB DVD

Read other 13 answers
RELEVANCY SCORE 38.4

Ok, I have six 3.5" bays in my computer and five 5.25" bays. I have 6 HDD's currently and am looking at adding more. I know there are simple metal holders that will hold one 3.5" disk in one 5.25" slot, and that there are things like this: http://www.newegg.com/Product/Product.aspx?Item=N82E16817332011 which hold five 3.5" drives in three 5.25" slots. However, I don't want to pay 120$ and i dont need all the hotswap/power buttons/etc. (though a fan would be nice). SO the question is this, is there a plain metal rack, at a resonable cost, that will hold 5 HDD's in three 5.25" (possibly with a fan)?
 

A:Fitting more HDD's in a computer.

Why don't you just purchase a larger hard drive, slave the old ones to it and transfer any data you want to save?? Large hard drives are really cheap anymore.
 

Read other 25 answers
RELEVANCY SCORE 38.4

I've an ISO archive file, that is around 6GB and my USB is of 14.6 GB. I formatted the USB drive and while I try to copy the 6GB ISO archive file, an error reports saying that "This file is too large for the destination file system". What's wrong here?

Formatting parameters that I gave were "FAT 32" for file system and allocation unit size as "Default"
 

A:ISO archive not fitting in USB?

Read other 10 answers
RELEVANCY SCORE 38.4

I have purchased a dvd burner to add to my existing cd-rw/dvd rom drive.
I would like to use the master/slave settings if i do this does the top drive have to be the master and the bottom drive slave or does it not make any difference. Also which which way round is it best to have the drives or is that not important.
 

A:Fitting new dvd drive

i dont think it matters a whole lot, but then also ive read issues that make it sound like the one that you want the better speed out of, should be the master. i personally have never noticed a whole lot of difference.
 

Read other 1 answers
RELEVANCY SCORE 38.4

Can anyone explain in clear language how do I replace a cd drive with a dvd drive, will the existing cables do? Is it a job that a newcomer like me should tackle. I only have room for one drive. Thanking you in anticipation, aberhosan
 

A:fitting a dvd drive

yes

You can do it easily.

In Simple Language here are the steps.

Take off both sides of your case. Normally there are screws on the back of the case. Sometimes they can be hidden by a removable panel on the front though.

Find your cd drive, it is held in place by 4 screws normally.

Remove those screws, pull the 2-3 connectors out of the back of the cd drive.

Insert DVD drive, plugging in wires exactly where they were on cd drive, if its a thin one with a black or white connector that came from the cd drive doesn't fit in the dvd drive then dont' worry, its just the audio for cds, XP doesn't even need it.

Replace the screws.

Replace the side panels of the case


Boot up computer.

Enjoy.

Edit: Oh I forgot, Check the jumpers on the new DVD drive. You need to set it to Master. You will see a plastic thing covering 2 pins on the back of the drive. Normally there is a diagram on the drive showing you where the jumpers go for certain settings, Typically MA is master SL is Slave and CS is Cable Select. Put the plastic thing over the 2 that correspond to MA. It is likely on that one or CS initially.

You can actually leave it on CS if its on that one, but I myself have never used any drives on CS.
 

Read other 4 answers
RELEVANCY SCORE 38.4

I'm rebuilding an old PC from bits and have found a problem I didn't know could exist.
I fitted an Intel LGA1155 to an ASUS P8Z77-V LX m/b. I went to fit an INTEL cooler fan assy to the m/b and could not get the holes on the m/b to line up with he Intel fan probes.
I found another, smaller, fan and had the same problem.

Surely this fitting is a standard and all m/b will support all sizes and specifications of Intel fans.

Or is it me?

I've built a dozen or so PC's and I know one has to wrestle with components sometimes, but this won't fit. Not no how!

Advice please
Thank you
 

A:Solved: Fitting CPU Fan

LGA1155 is the name of the socket on the motherboard. Look like you're trying to fit a cooler designed for a different Intel socket. If so I would have a look on Ebay for a compatible cooler for that particular socket/cpu combination.
 

Read other 3 answers
RELEVANCY SCORE 38.4

I have a video file thats 1.5 gb. The length of the video is 3 hours and 40 minutes. Is there a way I can fit this onto a DVD? I have a program that shows a bar on the bottom and when i add that file the bar goes off the screen meaning too many minues. They have the burn anyway option. Someone help. Thanks ahead of time.
 

A:Fitting Video On DVD

You have to adjust the bitrate the bitrate calculator loacated here: http://www.videohelp.com/calc.htm tells me you need a bitrate of 2400 to fit on a 4.7gb disc.

Trouble with that is 2400 isn't sufficent for 720x480 so you also need to adjust the resolution to 352x480. Otherwise tyou're going to get macroblocking.

If you tell me the properties of the original video I can elaborate a little more. What's the resolution, filetype etc.
 

Read other 2 answers
RELEVANCY SCORE 38.4

I am looking to speed up my desktop PC and I plan to fit a Samsung 840 Series Pro 256GB drive to run the OS and programmes.
My motherboard is an Asus P5W DH Deluxe.

Is there a way to get the best functionality from the the drive?

moose69
 

A:Fitting SSD 3 to old Mobo

The motherboard has SATA 3Gb/s ports so while it will limit the maximum potential read/write speeds, to about half, it will still be massively faster than a mechanical drive.

You could get a PCI-Express SATA 6Gb/s add-on card to run the SSD, you just need to be sure it's a card that supports booting from and that the motherboard can be set to boot of an add-on card which I think it does. Most of the cards don't seem to give performance equal to a motherboard with built in SATA 6Gb/s though.
 

Read other 2 answers
RELEVANCY SCORE 38.4

Hi

I am new to this forum and hope it can be helpfull...I have a few questions

I am wondering if Frame Relay and ATM are only for businesses who need some virtual circuit and am i right in thinking that they would either use T1/E1 or Fiber Ethernet carriers for this?

Or is Frame Relay and ATM used in all types on WAN technologies, so for example my DSL or cable modem is connected to some multiplexer and after that it will use Frame Relay or ATM using a T1/E1 carrier...and after that probably a T3/E3 carrier and probably after that on the internet backbone SONET using an OC? Also since SONET is protocol neutral, SONET would still use either Frame Relay or ATM or MPLS?

Is it the likes of Frame Relay and ATM that will get replaced by MPLS.

The thing is i know how all these technologies work but im trying to get my head around how they all fit together?

If anyone can help me out to give me an insight of how these technologies fit together...maybe a diagram or link to a good web page?

Regards
Classic
 

Read other answers
RELEVANCY SCORE 38.4

Hello,

I have just got myself a CD Re-Writer. Apparently it goes where the DVD drive is at present. I thought I would be brave and try fitting it myself. I presume that the cables to connect to it are the same ones for the DVD? Will wait to see what you have to say before venturing on this task!

Thanks,
Penny
 

A:Fitting a CD Re-Writer!

Read other 9 answers
RELEVANCY SCORE 38.4

hello, i need help, ive just recieved all the parts for my new computer..and i fitted the CPU and the heatsink but im not sure if the black lever is on the right side, or does it really matter, the heatsink is in place now and i cant take it off becuase i dnt have anymore thermal pads or paste..i show sum pictures
 

A:Fitting CPU heatsink

I`m not sure if it matters or not.

However, the pic may help.




Regards Howard
 

Read other 15 answers
RELEVANCY SCORE 38.4

Hallo
I am new and hope I am posting to the correct place. I am using a Toshiba Tecro and running some booking software which I use to take the bookings at my local community Centre. I am trying to use the facility to send an invoice by pdf, but I am asked to set up my email again even though the computer is already set up for email. The problem is that page that comes up does not fit on my screen and does not have a scroll bar. Therefore I can't fill in the details required and can't send my invoices by email. I tried tinkering with the resolution but this had no effect any ideas would be most gratefully received.

Lin205
 

A:fitting onto the screen

Read other 16 answers
RELEVANCY SCORE 38.4

Hey,

I'm getting around to building my own computer, and need some help with processors ans and motherboards.

I found a nice Soyo ATX motherboard, and I need to know if the processor I found will fit it. The motherboard says it supports AMD Athlon? 64 socket 754 processors, and what I found doesn't say anything about 64 socket or 754. The processor I found is an AMD Athlon? XP Processor 2800+, and in the specifications, it says it's socket A. Is that the same thing? They're both from the same website.

Please help me, and here's a reference to the items.

CPU: http://www.bestbuy.com/site/olspage...t&productCategoryId=cat01070&id=1058188520438
Motherboard: http://www.bestbuy.com/site/olspage...t&productCategoryId=cat01071&id=1072287119189
 

A:CPU/MotherBoard Fitting

No, that AMD socket A cpu wont fit in a socket 754 mobo.

Only the Athlon 64`s socket 754, and some AMD socket 754 semprons will fit in a 754 mobo.

Make sure that when you order the cpu, you get one that is socket 754.

Or of course you could go and buy the newer socket 939 mobo and Athlon64 939 cpu.

Regards Howard
 

Read other 1 answers
RELEVANCY SCORE 38

Hi, I've got a comp with 128mb DDR 2100 TWINMOS ram in it. I bought some crucial memory of the same sort, but I can't get it working in my computer. I have reseated it loads, and pushed down as hard as I dared (very), I have tried it on its own, and with the other ram, but my comp justs bleeps at me when its in, but the computer is fine without it. I'm sure the memory is the same type. The only visual difference is that my current memory has 8 black thingy's on it (modules?) and the new one only has 4.

Any suggestions?
 

A:(Solved) Trouble fitting new ram

Read other 10 answers
RELEVANCY SCORE 38

Can someone advise please,I want to fit a celeron 800 processor and a fan,The bearing surface is a lot smaller than the earlier chips,how do I apply the heatsink paste to the surface before I fit the fan.
 

A:Fitting a Celeron 800 Processor

Read other 7 answers
RELEVANCY SCORE 38

Hello
Thanks for reading my request. Ihave a brand new harddrive that i would like to add to my existing harddrive but i dont know where to start.Any help would be gratfully excepted
Thankyou
 

A:[SOLVED] Fitting A New Harddrive

Read other 9 answers
RELEVANCY SCORE 38

I have got flight sim 98 and was told I need to upgrade the graphics card. My computer is a Mitsubishi Apricot LS 500 P2 233MMX, 96 meg ram, ATI 3D range pro(atir3) on board graphics. I am using windows 98. I have bought a Voodoo 5 500 64mg PCI graphics card and would like to know how to fit it. I am told I will have to disable the onboard graphics either on the board or through bios, as I am a novice please can you guide me step by step through this procedure. I dont even know how to get into bios

Thanks
 

A:Fitting Graphics Card

On-board video disabling (J50)
If you install a video adapter expansion card, the computer should automatically detect this and disable the on-board video adapter. If for some reason this does not happen, and you experience problems with a newly-fitted card, you can manually disable the on-board video adapter by moving the jumper in block J50 to pins 2 - 3. For Details see: http://www.uktsupport.co.uk/apricot/mb/aprmust.htm

To enter BIOS depress F1 on boot.
 

Read other 2 answers
RELEVANCY SCORE 38

  I am currently considering updating my computer by installing a gtx 1050ti single fan gpu. Everything is stock on my computer except for the gt730 discreet gpu (which i plan to remove to install the new gpu). My 2 concerns at this point is power consumption and actual physical size. Measured the clearence for the gpu at about 6inches eyeballing it which is why im opting for the single fan which is smaller than the standard sitting at around 5.7inches. Also read about the card fitting into a 500-223w which seems to be the intel version of my computer. If anyone could tell me definitively if it will physically fit that would be much appreciated.   Looking at multiple power consumption calculators the range seems to be 250-350w running range. Building an almost identical computer on pcpartpicker.com has it running around at 237w (with the graphics card already in the build).  under load id expect it to spike to around 289w  which is slightly under the stock 300w psu which is living a bit more dangerously than i would like ,so im looking for reccomendations for a "better" psu to protect the parts of the computer from the laws of if something can go wrong it will. Thank you for your time and suggestions  

Read other answers
RELEVANCY SCORE 38

This has been going on for two days now. I'm not quite sure how it happened. On the right side of my screen there is a black line about 1/2 inch wide, that goes from top to bottom. I'm positive it has something to do with the resolution. Every time I go into my desktop properties the display settings are set to dual monitors. No matter how many times I change it to default, it stays at dual monitors. Anyone suggest anything?
 

Read other answers
RELEVANCY SCORE 38

Not impressed with onboard audio on my ASUS M2N-SLI mobo, but alas do not know enough about about fitting a soundcard!, anyway apparently the mobo does not support win 7 64bit, strange really because that's what I have been running since win 7 hit the shops, also no firmware updates available.
Could I fit a
Asus Xonar DGX 5.1 PCI-Express Sound Card

sorry for the shouting (cut&paste)?, your thoughts most appreciated.

A:Fitting a Sound card!

Yep! I would go in one of the two small PCI-E x1 slots that are located above and below the blue PCI-E x16 slot.

Read other 4 answers
RELEVANCY SCORE 38

I just bought a Chimei 22" widescreen LCD. Don't ask me what Chimei is; my system recognizes it as Sony.

The problem is that my integrated video card (Vinyl AC'97 video/sound combo) doesn't have widescreen resolution. Whether it's compatible or not is beyond me. All I know is that there are not widescreen resolution ratios in my display properties. How can I, if I can, open an option??

FYI - I updated the Vinyl AC'97 driver but 3 or 4 days ago.

A:New monitor - need fitting resolution.

If the video card does not have the resolution to support the monitor then you are just going to have to purchase a new video card or go back to the old monitor.

Read other 2 answers
RELEVANCY SCORE 38

Hi t all,

I just bought a new 1800 amd cpu, when i put it in and try and boot i get nothing, I have to put old 800 amd back in and everything is fine, i rang the shop and the guy suggested reseting the cmos by swopping jumpers, I've lost the manual that came with the pc, tried a few sites, but cant find anything about it, if anyone knows any good mobo sites or knows where to find the jumpers i would be gratefull.

motherboard is ecs k7s5a

thanks
 

A:fitting a new cpu, cmos jumpers ??

Hi, Your motherboard manual is here. You can save the whole thing to disk or floppy disk. http://www.ecs.com.tw/download/manual_k7s.htm

I think the link will show the page exactly for your board, if not, just use the selection boxes for your model. It is in .zip form, you will need WinZip or similar unzipping program to unpack the files to the folder you want it in or floppy disk.
 

Read other 3 answers
RELEVANCY SCORE 38

Hi, I wish to fit a new much larger hard drive to my computer. (currently 6.5Gb proposed 20Gb) there is nothing of muchimportance to me on the existing h/d (a few good progs I have copies on disc anyway) so it will be scrapped. Do I just plug in the new unit & then run my master discs that came originally with the computer or is there some other work required also?
Thanx,
Missmouse
 

A:new hard drive fitting?

Read other 14 answers
RELEVANCY SCORE 38

In Nero if the files I'm copying over are too large it'll give me the option of decreasing the quality so they'll fit.

Does anyone know of a similar feature in Ulead?

Thanks
 

A:Ulead ... fitting more video onto a DVD

I don't use Ulead but it should allow you to adjust quality and therefore size---Check out the manual.
 

Read other 3 answers
RELEVANCY SCORE 38

Back in the DOS days there used to be several programs which would fit different expressions (power, linear, log, exponential) to experimental data.

I have looked for something in Windows 8 to do this with about 100 X, Y pairs of data. I have not been able to find a free or inexpensive program to do this. I have downloaded several trial versions of programs which were said to do what I want but they all limited the number of point to just a few and wanted me to buy the full version for hundreds of dollars.

I would appreciate any help in finding one of the old simple curve fitting programs from the DOS days that I could run under Windows 8.

Thanks.

Photoguy
 

A:Curve Fitting Software

Like http://www.macaulay.ac.uk/IFRU/resrc_fcurve.html

Bottom of page
 

Read other 2 answers
RELEVANCY SCORE 38

Hi everyone,

I have a 'Crucial' brand SSD on it's way. I note the manufacturers advice to touch (ground) myself with the pc prior to handling the SSD.

I see on Amazon that they advertise metal, plastic and aluminium 'platforms' or mounting brackets to install the SSD onto. These are usually to mount in a HDD bay.

I have taken apart an old floppy drive and by drilling 4x holes in the sturdy floppy drive metal base plate, I could (preferably would), mount my SSD in the old floppy drive slot using this metal base.

So, I would be grateful if anyone could please clarify whether it is (or isn') ok to do this, because the SSD would of course be 'grounded' to the pc casing. Is that ok? i.e. it won't damage the SSD please?

Also, I read something in a closed thread about enabling AHCI to use an SSD. I don't know at the mo if mine is enabled, but all being well, I will enable it in the BIOS if it exists (it's not a new machine, lol).

My question re that is: assuming I enable AHCI, can I stil use a normal sata HDD as a second drive? If so will it be affected in any way by AHCI?

I have read about getting the SSD tweak utility to help out.

Thanking everyone in anticipation of some clarification on the above points please. Plus of course, any other tips that members may like to inform me of.

Many thanks,
 

A:Solved: SSD - rules for fitting and using

Read other 11 answers