Over 1 million tech questions and answers.

95$ for ASUS PCI geforce2mx- i am still frustrated to death, someone help me....

Q: 95$ for ASUS PCI geforce2mx- i am still frustrated to death, someone help me....

Well Hello Evryone!
Gautam here from india!

Well, i Recently bought this ASUS V7100 geforce2mx 400 pro tv, a PCI based graphics card! After spending literally all the 95$ i collected through the last six months, i still am in a situation where all i can do is bang my head after every 5 seconds my system crashes!

Ok, now coming to the core of the problem,
u see, i have a compaq 7500 presario with intel 810e chipset based motherboard (it really pi**es me off coz it doesnt have any AGP slot in it), anyway so that was the reason i went for this powerful PCI based graphics card!

Well, after i have inserted my card into one of the 4 PCI slots, i literally am running out of every moment of happiness in this world!

The card is very well detected by windows, i have installed the LATEST POSSIBLE DRIVERS (version 12.90 as per current release).
Now, whenever i boot my system, the card gets very well recognised in the begining, but after 5 to 6 minutes (in the windows enviorment), the ENTIRE SYSTEM FREEZEZ !!

If in case i am lucky, the system remains stable for 8 to 10 minutes!

Ok, now before i proceed to anything else, let me tell your that the compaq presario 7500 machine doesnt have lots of option which we can set in the BIOS !
So, i have fiddled with every possible IRQ (interrupt request) settings in the BIOS (BECOZ OF THIS MY ORIGINAL SETTINGS ARE ALSO LOST

Well, whenever it comes to playing games (the only reason i bought this), EVERY POSSIBLE GAME RUNS WELL TILL 2 TO 3 MINUTES, AFTER WHICH THE SYSTEM FREEZEZ! IT DOESNT MATTER WHETHER THE APPLICATION IS OPEN GL BASED OR DIRECT 3D)

So what in the end i hope that if in case there is anyone on this earth which can tell me what is wrong so that i can happily work with my brand new PCI card who's cover is still lying in spick span showroom condition on my table !

Sorry for the long mail, but i couldnt help as i am really disturbed!

If anyone is going to reply me "Asking me to write to ASUS tech support, please for GOD's sake dont waste your time, coz i have mailed them twice"
Best wishes,
Gautam

RELEVANCY SCORE 200
Preferred Solution: 95$ for ASUS PCI geforce2mx- i am still frustrated to death, someone help me....

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: 95$ for ASUS PCI geforce2mx- i am still frustrated to death, someone help me....

Read other 6 answers
RELEVANCY SCORE 56.8

Heya
Not a pro when it comes to computers so I would need instructions stepwise.
I did a search for bsod posts and tried some stuff for my pc.
Mostly followed this post :
http://forums.techguy.org/windows-vista/1089561-constant-bsod-screens.html

Also downloaded the TSG SysInfo and this is what it says :

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 8
RAM: 4051 Mb
Graphics Card: AMD Radeon HD 6900 Series, -2048 Mb
Hard Drives: C: Total - 152524 MB, Free - 32732 MB; D: Total - 476937 MB, Free - 321820 MB; F: Total - 953866 MB, Free - 430831 MB;
Motherboard: ASUSTeK COMPUTER INC., P8Z77-M PRO
Antivirus: avast! Antivirus, Updated and Enabled

Two things to note here:
1. I do have two 2gb ram sticks making the total 4gb ram, however one of them is plugged out for testing purposes so I have no idea why SysInfo shows 4gb ram
2. The card specifically is Radeon saphire HD 6970 (This is what I think might be the culprit.)

Downloaded SecurityCheck software and these are the results :

Results of screen317's Security Check version 0.99.63
Windows 7 Service Pack 1 x64 (UAC is enabled)
Internet Explorer 8 Out of date!
``````````````Antivirus/Firewall Check:``````````````
Windows Firewall Enabled!
avast! Antivirus
Antivirus up to date!
`````````Anti-malware/Other Utilities Check:`````````
Malwarebyt... Read more

A:Frustrated with blue screen of death.

Read other 12 answers
RELEVANCY SCORE 52.4

I have this card with tv out.
It has an S-Video port and also a video jack in it.

I cannot get the tv-out to work. I can go into settings and enable twin-view but the configuration for my tv set is greyed out.

I have installed updated drivers and still couldn't get it to work so i uninstalled the card altogether and re-installed the old drivers but still can't get it to work.

When i first bought the card, it worked fine and i was able to watch my VCD collection through the tv but i can't do that anymore.

Thanks for any help you can give

Jen
 

A:Geforce2MX No tv out

It might be a cable problem. Your video card isn't reading the TV. I own a GeForce 2 MX also, and I came across something similar at one point. It ended up being a bad coaxel cable But of course, I'm an idiot so it might not be that simple.
 

Read other 3 answers
RELEVANCY SCORE 51.2

This video card has the Twinview function, but only has a single VGA connection (the version of the card that I have has no TV-out or flat panel connection).
My question is... can I hook up a dual monitor adapter like Y-See Two (or some generic, poorer quality version of it) to take advantage of two monitors? Or do I ABSOLUTELY HAVE TO buy a second video card? I really want to be able to use two monitors with the single card, so I hope that using an adapter will work . Thanks.
 

A:GeForce2MX 400 TwinView question

twinview cards have two monitor outs, you must have the non twinview card, sorry

here is a picture of one

http://www.xtremepcuk.com/reviews/eg511/index.shtml
 

Read other 1 answers
RELEVANCY SCORE 51.2

I have an AMD 500 with 128mb and Voodoo 3 card. Would I see any improvement in 3d progs if I upgrade to a GeForce 2MX card or is this pointless? Just checking before I spend the loot.
 

A:Upgrade Vodoo3 to GeForce2MX

Read other 10 answers
RELEVANCY SCORE 48

I found a computer a while back with a asus a7v600-x board in it, and when i turn it on with my hard drive i put in it it gives me a bios rom checksum error. I heard reflashing the bios could save me here, so i went to the asus site and downloaded the latest bios for it. Im just wondering how do i reflash it, i have never done this before. And what will i need for this process? i believe it has an amd sempron 2200 in it, any tips and link would be greatly appreciated.

A:asus board of death, Please help me!!!!!

Try changing the battery:How do I change the CMOS Battery?

Read other 8 answers
RELEVANCY SCORE 47.6

About a month Ago i got a computer virus that wont boot me into Windows 7. When i turn of my computer, it starts up with the computer logo, then freezes to a black screen with a blinking underscore in the top left hand corner not processing anything. I can't even go into safe mode, and Alt-Ctrl-Delete just restarts it. The most i can do is enter boot mode by pressing F2 and enter ASUS express Gate just fine. Does anyone have any tips or solutions for this? It would be very much appreciated by me and my family.

Read other answers
RELEVANCY SCORE 47.6

Black screen of death from dad'said desktop Asus Essential cm1630 AMD Athlon II X2 220 / 2.8 GHz
Windows 7 Microsoft Windows 7 Home Premium
I think this virus related, either an attempted ransom ware or file compression virus, but who knows
Typical bKsod, computer boots looks like windows is loading, but screen goes dark with white arrow cursor
F8 boots allow Task Manager to run
"All New task run" end with Windows task maker has stopped working messages, close program is only option
I have tried f8
Repair your computer system repair
"No restore points have been created
Start up repair
Startup repair could not find a problem
Command prompt
Sfc /Scannow
There is a system repair pending which requires reboot to continue
Requires a reboot which cancels the sfc
Tried F8
Enabled boot logging
Enabled low resolution video
Last known good configuration
Directory services restore mode
Debugging mode
Screen still black

Read other answers
RELEVANCY SCORE 47.6

About a month Ago i got a computer virus that wont boot me into Windows 7. When i turn of my computer, it starts up with the computer logo, then freezes to a black screen with a blinking underscore in the top left hand corner not processing anything. I can't even go into safe mode, and Alt-Ctrl-Delete just restarts it. The most i can do is enter boot mode by pressing F2 and enter ASUS express Gate just fine. Does anyone have any tips or solutions for this? It would be very much appreciated by me and my family.

A:ASUS Black screen of death.

About a month Ago i got a computer virus that wont boot me into Windows 7.Did you run any scans that made system unbootable?Do you have your windows 7 DVD ? can you insert it and see if you can boot into recovery console?

Read other 1 answers
RELEVANCY SCORE 46.8

Help! My ASUS X44H laptop w/ windows 7 has the blue screen of death. I have recovery discs from ASUS, but after the screen says "loading windows files" it returns to the blue screen which says
"a problem has been detected and windows shut down, etc...
PAGE_FAULT_IN_NONPAGED_AREA...blah blah blah, and
Technical information:***STOP:0x00000050 (0x87840000,0x00000000,0x8B879B13,0x00000000)
I welcome any ideas!
 

A:Asus laptop blue screen of death!

Read other 10 answers
RELEVANCY SCORE 46.8

Hi,

I have an Asus U50A laptop running Windows 7 (64bit) Home Premium.

For the last 2 months I've been getting a blue screen that does a memory dump then crashes the computer. It doesn't happen every day, about 1x/week. I have already updated the machine and I think I updated all of the drivers, but I could be wrong about that.

I just scanned the computer and the results are attached. Anyone that can provide some analysis and suggestions would be greatly appreciated. I'm close to just getting rid of the computer and starting fresh.

A:Blue Screen of Death on Asus Laptop

Hi,

Try the solution listed here: -

Bluescreen, MpFilter.sys driver - Microsoft Community

Read other 4 answers
RELEVANCY SCORE 46.8

Hey guys!

In the summer of '10, I bought an Asus K70ID notebook. When I first started it, everything seemed allright. But when I started installing software, the BSOD appeared.. There are weeks were I don't notice anything, and everything works good, but sometimes he just crashes 6 times in a row..

The message says that I have to delete newly installed files and try again, but I did, and the BSOD still appears.. It mostly appear when I use my processor a lot (iTunes, MSN, gaming etc.)

I phoned the story I bought it from, and they told me that I had to put it back to factory settings. I did, but still the BSOD appears..

Can somebody help me?

Specification:
Processor: Pentium(R) Dual-Core CPU T4400 @ 2.20GHz
Ram: 4GB
System:64 bits
Windows 7 Home Premium (x64) - pre-installed

PS: Sorry for the grammar mistakes, I'm Dutch

A:Blue Screen Of Death Asus notebook

http://www.sevenforums.com/crashes-d...tructions.html

Read other 9 answers
RELEVANCY SCORE 46.8

I have a one year old Asus S6F laptop. Was working fine up until this morning. Today I turned it on and nothing happens. The computer powers on (the green light is on and you can hear it trying to work), but the only thing I see is a black screen. I've rebooted a few times, and this black screen is all I get.

Any suggestions? Doesn't look good to me...
 

A:Asus laptop - black screen of death?

Read other 6 answers
RELEVANCY SCORE 46.4

Hello, Please can anyone help me, With my dead laptop? Asus Laptop- G6OJ, OS Windows 7.
When turned on it powers up, but that's All it does! Nothing else, well the fan turns on, the CD player spins, that is all......Thankyou-
 

Read other answers
RELEVANCY SCORE 46.4

thread title:
Blue Screen of Death (BSOD) - ASUS GTX 760 & DirectX
New Post: 8/17/2014 in TSF BSOD, App Crashes And Hangs Forum
A:
BSOD - system crashes in detail:
I am Black & Blue Screen of Death (BSOD) over "DirectX Graphics Kernel" / dxgkrnl.sys+5d140 conflict with ASUS GTX 760 & DirectX.

Seems to be related to:
driver for Samsung Monitor

B:
basic System Information:
------------------------------------------------------------------------------------
OS: Windows 7 Professional, 64-bit (Service Pack 1)
? Is original installed OS (I purchased OEM version from Fry's )
- Is new Hardware and OS installation (Date : 2014-0509)
CPU: Intel Core i7-4771 CPU @ 3.50GHz

Video Card: Graphics card
ASUS GeForce GTX760-DC2OC-2GD5
Video Memory GDDR5 2GB

MoBo: EVGA Z87 FTW 141-HW-E877-KR
RAM: 8 Gb DDR3 1600Mhz DU Corsair
Power Supply: Corsair RM650 650w PSU
-
also:
DirectX version: 11.0
Monitor: DVI-I to VGA Adaptor to KVM to Samsung
SAMSUNG Monitor Model Name: SyncMaster 912N

Virtual Machines:
Windows XP Mode (Virtual Windows XP)
Oracle VM VirtualBox
VPN
--------------------------------------------------------------------------

So far I have ruled out:
hardware: ok
This is a BRAND NEW Hardware (bought at Fry's, & assembled by their Tech).
This is a BRAND NEW OS installation (by me**), as of (Date) May09-2014.
I installed all drivers for all the equipment. Ditto for any / all company updates!
I ran &qu... Read more

A:Blue Screen of Death (BSOD) - ASUS GTX 760 & DirectX

-
Note:I have switched from :
BSOD dxgkrnl.sys+5d140 DirectX Graphics Kernel
BSOD dxgkrnl.sys+5d140 DirectX Graphics Kernel
to this thread title (Blue Screen of Death (BSOD) - ASUS GTX 760 & DirectX ) .

Read other 6 answers
RELEVANCY SCORE 46.4

Last week the office manager at my job went to lunch and upon returning found her ASUS i5 laptop frozen solid.  She did a hard shut down and tried to restart, when the computer came back on, it was a black screen that said "failure to connect media".  I turned off the computer and removed the HD.  I plugged the hd into an external connection kit to my laptop and found that it was emitting a clicking sound and wouldn't load.. so I know the HD is bad.  I burnt Ubuntu to a DVD rom and put that into the computer, I then changed the boot method to booting from the DVD drive.  When the computer restarted it came up with a black screen with nothing on it.  I removed the DVD and tried to reboot, the same thing happened.  I went out and purchased a new HD and tried to reboot, the system lights are on, but still a black screen.  
 
I have taken out the battery, HD, and let the PC sit for about 30 minutes and then tried to reboot, same black screen.  Today I brought in a USB diagnostic tool and used it on the computer without the HD in it.  The code that displayed on the LCD was 'FF' which is a boot issue and usually points to the HD, correct?  I also plugged the laptop to an external VGA monitor, nothing came up, so I know the screen is not dead.  The laptop is only 9 months old.  
 
Right now the only thing useful I can use this PC for is a paper weight.  Any ideas on how to solve the issues at hand?  ... Read more

A:Windows 7 ASUS i5 HD failure and Black Screen of Death

Sounds like it may be a dead motherboard. Since it's only nine months old, I'd RMA it under warranty.

Read other 6 answers
RELEVANCY SCORE 46

I built my new system,
and I'm trying to install windows so I can use it.
But it keeps showing blue screen of death whenever I try to install windows.

I only have windows xp CDs.
So I'm trying to install windows xp SP2 by booting from my DVD drive/rom thing.
and it tries to boot and the cd in the dvd rom starts turning.
but after all that system configuration stuff shows up on the bottom of the screen and it says "setting up windows files" or w/e..and its trying to go into the partition menu....

it suddenly just shows blue screen.

I don't know what I can do.

Here are my specs:

-Asus P8P67 pro motherboard.
-Intel i5 2500k cpu.
-WD Caviar Black 1TB hard drive.
-G.Skill DDR3 PC3-17066 2133MHz ram.
-ATI HIS HD2600XT dual link dvi graphics card.
-Corsair TX750W Power supply

I tried 2 different windows xp SP2 cds..
both of them worked on my old computer.
but its not working on my new one.

The boot priority is set to my DVD rom.
and my Hard drive shows up on the boot menu as well.
so its not that..

also i took a camera photo of the bluescreen error.
i cut out the top, cuz its usually the same thing.
"a problem has been detected and windows has been shut down....blah blah blah"

ill attach the photo here.
please help me out.
its very urgent.
thanks.

(also i actually installed windows on this new hard drive (WD Caviar Black 1TB) using my old computer (old computer's cd rom uses the old IDE CD-ROM Drive Ribbon which my... Read more

A:[SOLVED] [URGENT] ASUS P8P67 Pro BLUE SCREEN OF DEATH

That blue screen error is because the Windows disc you're using doesn't have the correct drivers to support your hard drive. If you have a floppy drive, you can download the Mass Storage drivers for your mother board to a floppy disc and press F6 when prompted by Windows setup.

You could also go into your BIOS setup and change your SATA operation to Compatible mode (may be worded differently) for the installation. Or you can download the storage drivers and slipstream them into your install disc with nlite

Read other 4 answers
RELEVANCY SCORE 46

i have an ASUS piece of garbage thats not even a year old - model X751N - that opened up today with a series of start-up errors. one was "Inaccessible Boot Device" and it tried repairing itself multiple times. then it opened up automatically in ASUS Bios Utility which i couldnt get out of. i looked online and found a way to get around it, but my overall question is, when im getting these errors and auto-repairing and bios utility...is this generally a sign that the laptop is a goner? i dont think i can trust this unit anymore. its running windows 10 if you need to know.

thanks for reading.
 

Read other answers
RELEVANCY SCORE 34.4

The other day, I tried to do a factory reset on my laptop, but it failed, and I could only click cancel. Now, when I booted up my computer, it goes to the ASUS logo, then a black screen, still backlit, with an underscore flashing in the upper left corner of the screen. I can access the BIOS, and have been trying to do boot overrides. Please help, I don't have the ASUS Recovery partition installed on the laptop, and I don't have any possible ways to install an ISO. Thank you for any help you can provide.

A:My ASUS G74SX doesn't boot past the ASUS logo!

Originally Posted by Isoldmyname


The other day, I tried to do a factory reset on my laptop, but it failed, and I could only click cancel. Now, when I booted up my computer, it goes to the ASUS logo, then a black screen, still backlit, with an underscore flashing in the upper left corner of the screen. I can access the BIOS, and have been trying to do boot overrides. Please help, I don't have the ASUS Recovery partition installed on the laptop, and I don't have any possible ways to install an ISO. Thank you for any help you can provide.



Hi.
Not sure I understand how you could perform a factory reset if you don't have the recovery partition available. You should have gotten an error that the ASUS Recovery Partition could not be found.

You would need to get to a working computer and download either the Media Creation Tool for W10, or the current ISO from MSTechBench. You can use RUFUS to create a bootable flash drive, and then install W10 that way.

You might also want to check the health of your hard drive, to make sure it's not failing.

Hope that helps!

Read other 0 answers
RELEVANCY SCORE 34.4

CPU: AMD64 Athlon X2 4400+
Motherboard: ASUS A8N32-SLI DELUXE
Memeory: SAMSUNG PC3200 2GB (1GB x 2) DDR400
GPU: ASUS EN7600GS SILENT PCI Express 512MB DDR2
PSU: 550W SILENT KING-4 SUPER SILENT SWITCHING POWER SUPPLY
HDD: 300GB SATA II

Status: After installing Windows XP SP 2 and the ASUS motherboard installation CD, the system won't take the drivers for the GPU. System boots to the Windows XP loading screen and remains there. The little green bar just keeps moving like it's loading Windows but it loops forever. Again, this started happening right after installing the nVidia drivers from the graphics card installation disc. If I power down manually and then power back up again, I can go into "the last known good" but every time I try to load drivers again, the system starts doing this. The latest drivers from nVidia cause the same issue. I'm starting to think this is a driver conflict with the ASUS motherboard chipset or the motherboard RAID drivers. Has anyone else had a problem like this?
 

A:ASUS A8NSLI-32 Deluxe + ASUS En7600GS Silent Trouble

Followup: I was able to fix it and thought I'd post this info since it might help others who might have the same problem. After reading through dozens of pages here and in the ASUS forums, I discovered that one of my default BIOS setting mysteriously ended up in a non-default state. For some reason, the RAID option for Silicon Image was set to RAID. That's fine for those how actually want to setup RAID but I didn't plan to use RAID at the time. After making the change to the BIOS, I had to install Windows XP again to get everything registered correctly. Once Windows was up and running, I avoided the motherboard chipset install CD all together by using only the newest versions of all the motherboard drivers directly from the ASUS website. Problem solved!
 

Read other 2 answers
RELEVANCY SCORE 34.4

Asus has some way of starting their programs that I can't find. In particular, I want to disable their Wireless Console 3 (wcourier.exe). There are other programs but I can't remember what they are right now. I can only tell you that is does not show up in msconfig or HJT. Does anybody know where I can find these startup entries?

Thanks!

Mark

A:Asus Laptop can't find startup entries for Asus Programs

Try using Sysinternals Autoruns.
It lists a lot more than msconfig.

You can download the Sysinternals Suite, or just the Autoruns utility.

Windows Sysinternals: Documentation, downloads and additional resources

Read other 2 answers
RELEVANCY SCORE 34.4

HI all,

I am having problems detecting the Xonar Pheobus and have tried all the pcie slots with no luck. Red and the grey - even the shorter grey slot.

Have disabled the motherboard's HD onboard sound too and still not detected in my devices......

The pcie cable is connected to the sound card and I have enough PSU to power all - Enermax 1250W.

When the card is inserted to the grey slots - The red light is seen through the control extension box (Headphone/Microphone Connector box) jack ports. However the green light is NOT seen AND the Xonar Phoebus logo on the card itself is lit (powered up)

However, when I insert the card into the red pcie slots these lights are not on.

One this else I noticed is the card DOES go warm over some time so tells me it is 'not' switched off........

I tried to install the driver and I get a message 'no card detected' etc etc.
Is there anyone kind enough to advise me their BIOS settings etc who has managed to get the Xonar to work properly. Did you have to adjust any BIOS settings from default to get the card to be recognised?

Printscreens would be cool if it is not too much of a bother.

Thank you in advance

Kind regards

Killershadow
 

A:Asus Xonar Phoebus and Asus Rampage 5 Extreme issue

The question(s) I have is ->
Am I missing anything when attempting to install the sound card? I have tried with no GPU drivers (including the Nvidia sound for the GTX 750 ti sc) / disabled onboard HD sound and still the sound card not detected.
Even in this motherboard, it should detect the sound card regardless of what sound source is set as default and then allow me to install it and set it as default (without messing about with the BIOS)?
Maybe my sound card has died when moving it from the last computer - Static death.....................
Thanks
 

Read other 3 answers
RELEVANCY SCORE 34.4

Hello,
I have in my possession an Asus X550CA laptop which was running Windows 8.1 before it failed to boot. The machine cycled through the automatic repair, failed, and then did nothing. The advanced bootup options were useless, including chkdsk, sfc and the usual suspects. The recovery partition was apparently missing, atleast, I couldn't use it, but doing a diskpart confirmed it was there so I suspect the 8.1 upgrade broke the link to it.

I tried the "refresh your PC" option, but this told me the drive was locked, and disabling secure boot via the BIOS did nothing (thought it would at first). In addition, the reset your PC option wanted recovery media which I didn't have at the time.

I ordered the official Asus recovery DVDs as the laptop did not have media created when it was new, hit F9 and went to the "reset your PC' option, but it told me the recovery media wasn't valid. Odd given it's official Asus media from Mentor Media, for that specific machine.

From the legacy BIOS I booted from the DVD, it loaded the Asus specific Windows 8 recovery options from the disk and I get as far as "Start rebuild Windows system process", with "processing...." underneath and the machine does no more.

I've also tried UEFI booting from the DVD drive and get the same as above.

Any suggestions welcome please!

Regards.

A:Unable to restore Asus X550CA using Asus recovery DVDs

Is the ASUS recovery media Windows 8.0 or 8.1? It may be because the recovery disks are 8.0 and it's a conflict because your now running 8.1. The 8.0 to 8.1 upgrade does break the factory recover feature on some laptops. ASUS for sure I think. I have a K75DE, that shipped with Windows 8.0. I clean installed with Windows 8.1 from here, Create installation media for Windows 8.1 - Windows Help. It reads and uses my 8.0 OEM embedded code and activates online automatically. no muss no fuss. That tool will create a bootable USB thumb drive that will work with UEFI for you. If you need any more info just ask and i'll see if I can help. I don't know why your getting the "Start rebuild Windows system process" message and the lock up? It may be because the partition structure has changed on the Drive. I created a Recovery drive, then swapped in an SSD and it would not work on the SSD. It kept saying required partition missing. That's why I bailed and did a clean install. I was leaning in that direction anyway.

EDIT: If I don't get back to you tonight don't panic. I have company coming and may not get back online until tomorrow morning. Have to go now.

Read other 2 answers
RELEVANCY SCORE 34.4

Greetings,

My almost 3 year old Asus X52 F3SV Notebook suddenly froze and shut itself down today. It will not boot past the 'Asus' logo screen. The furthest it got was 'loading windows', but quickly rebooted once that screen showed up.
It has been running quite hot lately, but i cleaned the fan out last weekend, and it had been running without problem since then.
I'm running Windows Vista Premium, with no other real problems until now, with up to date windows updates and regular Spybot and anti-virus scans.
There were random multicoloured lines running through the Asus screen on the first reboot after freezing. Could it be my graphics card? (Nvidia 8600m). I did not hear any crackling/popping sounds, so I really hope it's not dead yet.
I've looked around these forums, but couldn't find a similar problem/solution.

Thank you.
 

A:Asus x52 F3SV notebook not booting past Asus screen

Try running Bios defaults

This settings area can be called:
Bios Setup
CMOS Settings
System Setup
even just Setup
You can enter it by pressing the keyboard key that is displayed on your screen when first turning on your computer
Its sometimes:
A Fn Button like F1, or F2, or F10 or some other Fn key
DEL key
(whatever the computer states on screen when you first turn on your computer)
Once in Bios Setup, locate Setup Defaults (sometimes called Optimized Defaults)
Apply it, then Save and Exit Bios Settings (which is usually F10, but it will tell you in the Bios Settings screen)

If that doesn't help try reming and re-seating your Ram cards (even your hard drive)
You can download your Manual to find the locations of these components, but they are usually located under the laptop, under the covers

If it is your Video card (onboard) then that was be a big concern
You may need to locate the disassemble guide online, then blow out all internal dust

It may also require a CheckDisk scan
You can read HERE on how to do that outside Windows
 

Read other 1 answers
RELEVANCY SCORE 34.4

Tried to get HP support to give some similar board model from ASUS' own models so I could get the correct Asus AI Suite to control fans, read system info. The similar Asus model they gave didn't even have the same chipset. I'm not sure if that truly matters as far as their AI Suite working correctly. Just need a reliable program to adjust case fan speeds a bit. Simpler is better.

1) Does anyone know how I can cross the HP / Asus board w/ some similar model on Asus' site to get the correct version of AI Suite?

2) If no to # 1, suggestions on reliable prgms that will allow controlling fan speeds?
Fairly sure this mobo has the ability to adjust fans. 1st tried SpeedFan - no options to adjust any fans (reports them), but MSI Afterburner had no trouble adjusting GPU fan.

None of several socket 775 boards I looked at on Asus' site had G33 chipset.

The info HP has for this mobo is

Manufacturer's motherboard name: Asus IPIBL-TX
HP/Compaq name: Burbank-GL8E
Form Factor Micro-ATX: 24.4 cm (9.6 inches) x 24.4 cm (9.6 inches)
Chipset Intel G33
Front-side bus speed 800/1066/1333 MHz (processor dependent)
Processor upgrade information
Socket type: 775

Thanks.
 

Read other answers
RELEVANCY SCORE 34

I do see that you have had a similar problem already on this forum but it didn't fix mine (I probably wasn't doing something right).
My Laptop wont start up it goes to the Windows Recovery error page where you have to choose either Launch Startup Repair (recommended) or Start Windows normally. Both of these options lead you to the same result to the Asus Preload Wizard page.
I tried pressing F8 and F9 but didn't get anything.
Appreciate any help you can give me. Thank you

Cheers
 

Read other answers
RELEVANCY SCORE 34

ok went out and bought an asus spdif out module for my puter - the mobo has spdif 6 pin connector on board

problem is module only has 3 pin connector

anyone know how to connect

module has pins 1,2,& 3 says 1& 2 for green header (ac97) and 2&3 for black header pci audio

mobo has spidf out +5v spdif in
ground ground

on the 6 pin connector (1 pin missing)

do i connect spdif out & ground or spdif out & +5v?? don't want to fry the module

Thanks 4 your help
Ken
 

Read other answers
RELEVANCY SCORE 34

Does Asus P6T or Asus P6T SE support Triple Channel in Memory (RAM) ?
What's difference between Asus P6T and Asus P6T SE ? Which one you guys suggest ?
 

A:Solved: Asus P6T vs Asus P6T SE and Triple Channel Support

Read other 11 answers
RELEVANCY SCORE 34

Summary:

I am putting this in the general forum section, and please bear with me. I had posted earlier a thread about my Asus Ultrabook backlit keyboard not illuminated. Thank you all that have responded to that post, but nothing worked. I ended up sending in my Asus for RMA and warranty repairs.

Here is where the fun starts. I first made my case with Asus and they informed me that my Serial Number was invalid. I told them that it is wrong as I bought the Laptop from MemoryLabs.com, which is a Certified Asus Re-seller. It even posts their name on their website in "Where to Buy Asus".

Please do not take this as racist or anything derogative, but the Asus support staff are all located in India, and there is no way to talk to a person in America. The repair facility is also contracted out to a company called BizCom in Milpitas, California. Now, the men and women who work at the support center in India do their best, but to my understanding, they are a separate company working to just take calls. Same with the BizCom company, which they are great, but again contracted so there is nobody who works for Asus or knows Asus's RMA system.

My laptop has been sitting at the repair center with no updates from Asus. When I contact the support center directly, they said the Serial Number was Invalid and that they had to talk to Asus about the warranty service. I though Asus already fixed this when I sent them my Invoice of the Laptop and that it was a certified Reseller?
My... Read more

A:Asus UX51VZ-IS71T: Question on Asus Support?

I had correspondence with ASUS via e-mail. It was a while ago now, I think it was a link on their web site. It was a waist of time really. I wasn't impressed. Replies took forever and the answers seemed to be scripted responses. I eventually just gave up asking any more questions. My issue was with creating recovery media. At that time there was no way of creating a recovery disk set in Windows 8.0. The utility I was referred to only worked in Windows 7. It became a non issue when I put an SSD in my laptop and did a clean install of 8.0.

Most of those contracted out call centers go by a flow chart. Ask this question, if the answer is yes, take this branch, if its no, take this other branch. The person asking you the questions may have no technical background at all. As soon as you say I don't know, your basically screwed. Assuming you can actually understand what they are saying. I'm not racist, but I don't think its unreasonable to be able to talk to somebody that is fluent in my native language. It seems to be the luck of the draw sometimes. I've had some that I could understand easily, and some that were almost impossible to understand.

Read other 6 answers
RELEVANCY SCORE 34

So I recently just replaced my Asus P6X58-E WS with another Asus P6X58-E WS from Amazon. I always remember hearing to ignore the drivers disk on CD that comes with product and go straight to web-sight and gather latest. (I ALWAYS keep CD for just in case moments) When I was running Win7 last year on old MB, this was never a issue and downloaded drivers from Asus web site, but when I recently went to the Asus drivers download site, there are no options for win8? (Screen Shot Below)
Here Is my problem... After Installing new MB and testing OS operations with only my SSD pluged in (OS win8 is on SSD) everything was working great!! this also confirmed a few of my last MB memory slots were fried because I had 18GB of memory installed but BIOS & OS was telling me I had only 6GB.. Im back @ 18GB now...
I also had QTY6 1TB-HDD I was using with previous MB ( No raid configurations) I record music and many project files can get very big so, each HDD was dedicated to different "IMPORTANT" things. Well, after confirming OS win8 was in working order, I powered down and plugged in all 6 HDD, then powered back up. (I wish I would have done this one HDD at a time now) only 2 are being recognized!!! I keep getting the message....
"you must initialize a disk before logical disk manager can access it"
Now, from what I've gathered from a Google search, this is what you would do to format a NEW hard drive, Correct? I then was reading its as simple as downloading lates... Read more

A:NEW!! Asus P6X58-E WS MB. No Win8 Drivers on Asus website?

From what I found on the Asus site....
ASUSTeK Computer Inc. -Support- Drivers and Download P6X58-E WS
They are only providing drivers up to Windows 7 64 Bit. You can go to the file manager and click one time on the primary HDD and then click computer tab and from there click on manage. From there you click device manager and you will get a list of your hardware. You can right click on each one and click update driver and the system will try to find the updated driver for you. If anything you now have your hardware name and can try to get the updated driver through the actual company who builds the drivers.

It also does sound like you may need to format the HDD's. Do the same thing but instead of clicking on device manager you will click on disk management and you can right click on each drive and select to format. Just make sure to not format the primary partition if that is even possible.

Read other 4 answers
RELEVANCY SCORE 34

Connecting asus spdif module to asus p4b mobo

sorry i also posted this in the audio section but maybe this is a better place to post it

--------------------------------------------------------------------------------

ok went out and bought an asus spdif out module for my puter - the mobo has spdif 6 pin connector on board

problem is module only has 3 pin connector

anyone know how to connect

module has pins 1,2,& 3 says 1& 2 for green header (ac97) and 2&3 for black header pci audio

mobo has spidf out +5v spdif in
ground ground

on the 6 pin connector (1 pin missing)

do i connect spdif out & ground or spdif out & +5v?? don't want to fry the module

Thanks 4 your help
Ken
 

A:Connecting asus spdif module to asus p4b mobo

same problem with a7n8x deluxe

hello karmstrong, i just got my spdif out module today (optical & co-ax) and have the same problem with my a7n8x deluxe. 5 pin socket on the board, three on the module. i suppose we need a different module? if anyone has any suggestions, i'd be very much obliged...
 

Read other 8 answers
RELEVANCY SCORE 34

Hi all i am scratching my head at what mobo to get i was serioulsy going towards the maximus formula cause it has cpu level up for overclocking but it has pcie 2.0 and i have an 8800 gtx will it be compatible? with 2.0 bus . if you guys could maybe give me the pros and cons of each board i could make up my mind cheers
 

A:Asus striker extreme or Asus maximus formula?

that is a new board and the 2.0 bus is what the new video cards are going to be coming out at and this board will work work with u're card.
 

Read other 4 answers
RELEVANCY SCORE 34

Ok, i've been trying to fix this by reading old threads and learning stuff but i'm real frustrated right now. Here's my deal, i'm running Win98 and just to start it up i have to do a step by step and NOT run the system reg or the autoexec.bat to get windows to start. I just got my msconfig to work today but my regedit doesn't even come up at all. It just shows the loading cursor then nothing. I've tried installing Spybot but the install program won't work, it's the same install program that i've tried using for other things and it never works. It just says as soon as it loads 'are you sure you want to exit the setup before it completes' and then opens the same window again, and again, and so forth. My computer will be okay on speed when i first turn it on, but if i come back to it an hour later it's slow as hell and my sys resources are shot. I think that's about my only problems now. Here is my hijack this log, i already cleaned it up some after going through the tutorial on here and checking all of the files. I haven't done that startup log thing but if that will help, i will. I'm running Zone Alarm and AVG Anti-Virus, when i did the scan with that it came up with Win32/Hantaner (about 10 times), Trojan Horse backdoor.mosuck, Worm/KWbot (about 40 times), Trojan Horse musichsearch, and I-worm/Yaha.G. But apparently they were all healed or moved to the "virus vault". Remembered something else... Read more

A:frustrated, need help

Read other 16 answers
RELEVANCY SCORE 34

I've run adaware se, spybot and still can't run msconfig and regedit in anything but safe mode, which means I still must have an infection. Any help is really, really appreciated. Here is a hijackthis log:

Logfile of HijackThis v1.98.2
Scan saved at 6:24:26 PM, on 11/03/2004
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\PROGRA~1\SYMANT~1\SYMANT~1\vptray.exe
C:\Program Files\Zone Labs\ZoneAlarm\zlclient.exe
C:\Program Files\BillP Studios\WinPatrol\winpatrol.exe
C:\Program Files\SpywareGuard\sgmain.exe
C:\WINDOWS\system32\AOLMSNGR.EXE
C:\WINDOWS\system32\cisvc.exe
C:\Program Files\Symantec_Client_Security\Symantec AntiVirus\DefWatch.exe
C:\PROGRA~1\Iomega\System32\AppServices.exe
C:\Program Files\Symantec_Client_Security\Symantec AntiVirus\Rtvscan.exe
C:\Program Files\SpywareGuard\sgbhp.exe
C:\WINDOWS\System32\ZoneLabs\vsmon.exe
C:\Program Files\AIM95\aim.exe
C:\WINDOWS\system32\cidaemon.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\Program Files\spywarestuff\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Window Title = Microsoft Internet Explorer provided by Comcast
O2 - BHO: SpywareGuard Download Protection - {4A368E80-174F-4... Read more

A:really frustrated.......

Run Hijack This again and put a check by these. Close ALL windows except HijackThis and click "Fix checked"

O4 - HKLM\..\Run: [AOL Messenger] AOLMSNGR.EXE

O4 - HKCU\..\Run: [SpyBlast] C:\Program Files\SpyBlast\SpyBlast.exe /autorun

O4 - HKCU\..\RunOnce: [AOL Messenger] AOLMSNGR.EXE

Restart to safe mode.

How to start your computer in safe mode

Because XP will not always show you hidden files and folders by default, Go to Start > Search and under "More advanced search options".
Make sure there is a check by "Search System Folders" and "Search hidden files and folders" and "Search system subfolders"

Next click on My Computer. Go to Tools > Folder Options. Click on the View tab and make sure that "Show hidden files and folders" is checked. Also uncheck "Hide protected operating system files" and "Hide extensions for known file types" . Now click "Apply to all folders"
Click "Apply" then "OK"

Now find and delete this file:

C:\WINDOWS\system32\AOLMSNGR.EXE

Delete this folder:

C:\Program Files\SpyBlast

Also in safe mode navigate to the C:\Windows\Temp folder. Open the Temp folder and go to Edit > Select All then Edit > Delete to delete the entire contents of the Temp folder.

Go to Start > Run and type %temp% in the Run box. The Temp folder will open. Click Edit > Select All then Edit > Delete to delete the entire contents of the Temp folder... Read more

Read other 1 answers
RELEVANCY SCORE 34

I have downloaded and installed Adware, Spy-Bot, and Spyware S&D. I have also tried other recommendations from threads I've found in here and I'm just stuck. Something just isn't working. Could someone please look at my logfile and advise me what to do. Thank you so much.

Logfile of HijackThis v1.95.1
Scan saved at 7:24:14 PM, on 7/23/2003
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINNT\System32\smss.exe
C:\WINNT\system32\winlogon.exe
C:\WINNT\system32\services.exe
C:\WINNT\system32\lsass.exe
C:\WINNT\system32\svchost.exe
C:\WINNT\System32\svchost.exe
C:\WINNT\system32\spoolsv.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\Program Files\Common Files\EPSON\EBAPI\eEBSVC.exe
C:\PROGRA~1\Grisoft\AVG6\avgserv.exe
C:\Program Files\Common Files\EPSON\EBAPI\SAgent2.exe
C:\Program Files\Norton AntiVirus\navapsvc.exe
C:\WINNT\System32\NMSSvc.exe
C:\Program Files\Norton AntiVirus\AdvTools\NPROTECT.EXE
C:\Program Files\Common Files\Lanovation\PrismXL\PRISMXL.SYS
C:\Program Files\GeCAD\RAV8 Desktop\ravmon.exe
C:\WINNT\System32\svchost.exe
C:\WINNT\System32\Tablet.exe
C:\WINNT\Explorer.EXE
C:\WINNT\System32\SK9910DM.EXE
C:\WINNT\GWMDMMSG.exe
C:\WINNT\System32\hkcmd.exe
C:\Program Files\Roxio\Easy CD Creator 5\DirectCD\DirectCD.exe
C:\Program Files\MUSICMATCH\MUSICMATCH Jukebox\mm_tray.exe
C:\PROGRA~1\QUICKT~1\qttask.exe
C:\Program Files\MUSICMATCH\MUSICMATCH Jukebox\mmtask.exe
... Read more

A:Please Help...I'm so frustrated

Hi PIMullet

Welcome to TSG!

Run Hijack This again and put a check by these. Close all browser windows and "Fix Checked"

R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http://search.searchenhancement.com...d=sesm&sstring=

R0 - HKLM\Software\Microsoft\Internet Explorer\Search,CustomizeSearch =

R0 - HKLM\Software\Microsoft\Internet Explorer\Search,SearchAssistant =

O2 - BHO: (no name) - {25a6cbd1-e638-4b7f-8cca-8d0ef9f01d9c} - C:\DOCUME~1\Brat\APPLIC~1\drchcrgoucsh.dll (file missing)

O2 - BHO: (no name) - {63B78BC1-A711-4D46-AD2F-C581AC420D41} - C:\WINNT\System32\btiein.dll

O2 - BHO: (no name) - {aa017689-e158-4af2-930e-db3c9b84daf5} - C:\DOCUME~1\Brooke\APPLIC~1\drchcrgoucth.dll (file missing)

O2 - BHO: (no name) - {D6DFF6D8-B94B-4720-B730-1C38C7065C3B} - C:\PROGRA~1\COMMON~1\BTLINK\btlink.dll

O3 - Toolbar: bygrgjxlaoa - {27f83f07-ed62-4bfb-b49c-d78c49e98b02} - C:\DOCUME~1\Brooke\APPLIC~1\drchcrgoucth.dll (file missing)

O4 - HKLM\..\Run: [win32app] C:\WINNT\System32\winpup32.exe

O4 - HKLM\..\Run: [TkBellExe] "C:\Program Files\Common Files\Real\Update_OB\realsched.exe" -osboot

O4 - HKLM\..\Run: [SwimSuitNetwork] "C:\Program Files\SwimSuitNetwork\SwimSuitNetwork.exe" /H

O4 - HKLM\..\Run: [SearchEnhancement] "C:\Program Files\scbar\v1\scbar.exe" /U

O16 - DPF: {26E8361F-BCE7-4F75-A347-98C88B418322} - http://dst.trafficsyndicate.com/Dnl/T_50017/btiein.cab

O16 - DPF: {56336BCB-3D8A-11D6-A00B-0050... Read more

Read other 3 answers
RELEVANCY SCORE 34

When we log on to My Space, Norton is blocking an attack on the computer. My Space home page comes up, but none of the apps load. this has been going on for 4 days and so far this is the only web site we are having trouble with. My question is how can we get the apps to load? Ran Hijack This:ogfile of Trend Micro HijackThis v2.0.2
Scan saved at 9:09:00 AM, on 12/14/2008
Platform: Windows Vista SP1 (WinNT 6.00.1905)
MSIE: Internet Explorer v7.00 (7.00.6001.18000)
Boot mode: Normal

Running processes:
C:\Program Files\Norton Internet Security\Norton Internet Security\Engine\16.2.0.7\ccSvcHst.exe
C:\Windows\system32\taskeng.exe
C:\Windows\system32\Dwm.exe
C:\Windows\Explorer.EXE
C:\Windows\RtHDVCpl.exe
C:\Windows\System32\igfxtray.exe
C:\Windows\System32\hkcmd.exe
C:\Windows\System32\igfxpers.exe
C:\Program Files\Google\Google Desktop Search\GoogleDesktop.exe
C:\Windows\system32\igfxsrvc.exe
C:\Program Files\Google\Google Desktop Search\GoogleDesktop.exe
C:\Program Files\BroadJump\Client Foundation\CFD.exe
C:\Program Files\AT&T\Self Support Tool\ATTTray.exe
C:\Program Files\Canon\MyPrinter\BJMYPRT.EXE
C:\Program Files\ScanSoft\OmniPageSE4\OpWareSE4.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\Windows\ehome\ehtray.exe
C:\Program Files\Dell Support Center\bin\sprtcmd.exe
C:\Program Files\Windows Live\Messenger\msnmsgr.exe
C:\Program Files\Windows Media Player\wmpnscfg.exe
C:\Program Files\Digital Line Detect\DLG.exe
C:\Windows\system32\wbem\u... Read more

A:Frustrated

Hello Sharon Haus,

If you still require assistance, we require a more comprehensive set of logs to determine the presence of malware. Please follow the instructions in our sticky topic New Instructions - Read This Before Posting for Malware Removal Help and post the requested logs in your next reply.

Read other 2 answers
RELEVANCY SCORE 34

having trouble with my cursor or mouse or something when typing the cursor just moves kicks me out of and either on a diferent screen or chatting or what ever it kicks me out jumps all over the place and not even touching the mouse
 

A:Frustrated

Do you have a laptop or desktop? What's its make and model?

Do you have a mouse plugged in? If so, have you tried another mouse? Have you tried the current mouse on another computer?
 

Read other 3 answers
RELEVANCY SCORE 34

Ok, tried several things, I've used ad-aware several times, also used NoAdaware, as well as CSshredder. After reading someone else's post who had some simular files I wonder if I went about this the wrong way....but any help that can be given at this point would be much apreciated. My homepage is instantly redirected, and if I use adaware the registration keys are instantly replaced after I delete them. Also been having Illegal operations on Explorer from the file: MSHTML.DLL Also having MSScriptControl:: Unkown Error coming up everytime I reboot. I believe these are probably related, but could just be random problems I guess that happened right when I got infected Anyway here's a copy of my HiJack log:Logfile of HijackThis v1.98.2Scan saved at 4:08:38 PM, on 11/20/04Platform: Windows 98 SE (Win9x 4.10.2222A)MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)Running processes:C:\WINDOWS\SYSTEM\KERNEL32.DLLC:\WINDOWS\SYSTEM\MSGSRV32.EXEC:\WINDOWS\SYSTEM\MPREXE.EXEC:\WINDOWS\SYSTEM\mmtask.tskC:\PROGRAM FILES\COMMON FILES\AOL\ACS\ACSD.EXEC:\WINDOWS\EXPLORER.EXEC:\WINDOWS\TASKMON.EXEC:\WINDOWS\SYSTEM\SYSTRAY.EXEC:\WINDOWS\SYSTEM\ATIPTAXX.EXEC:\WINDOWS\SM56HLPR.EXEC:\WINDOWS\MIXER.EXEC:\PROGRAM FILES\KARNA\RAZER\RAZERTRA.EXEC:\WINDOWS\RUNDLL32.EXEC:\WINDOWS\SYSTEM\ZYIG8HSEWO4THD... Read more

A:Getting frustrated

Ok, not trying to bump my post, I alread read that it doesn't help my cause any. I just felt obliged to post that I am updating my windows (been looking through the posts) per that winupdates.com and have about 22 critical/service pack updates to Download. This should take a while since I'm on a 56K and it's 15.5mb. Also I thought I should repost my log, because it's changed. Again, I wish to say thanks for the admins here, really think you should get something out of your eforts, but about all I can pay you in would be CB$ (and I doubt you know what that is...) So I'll just say thanks again, sorry to bother everyone with this post moving around Logfile of HijackThis v1.98.2Scan saved at 6:04:28 PM, on 11/20/04Platform: Windows 98 SE (Win9x 4.10.2222A)MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)Running processes:C:\WINDOWS\SYSTEM\KERNEL32.DLLC:\WINDOWS\SYSTEM\MSGSRV32.EXEC:\WINDOWS\SYSTEM\MPREXE.EXEC:\WINDOWS\SYSTEM\mmtask.tskC:\PROGRAM FILES\COMMON FILES\AOL\ACS\ACSD.EXEC:\WINDOWS\EXPLORER.EXEC:\WINDOWS\TASKMON.EXEC:\WINDOWS\SYSTEM\SYSTRAY.EXEC:\WINDOWS\SYSTEM\ATIPTAXX.EXEC:\WINDOWS\MIXER.EXEC:\PROGRAM FILES\KARNA\RAZER\RAZERTRA.EXEC:\WINDOWS\SYSTEM\SYSTIME.EXEC:\WINDOWS\SYSTEM\SYSTIME.EXEC:\WINDOWS\SYSTEM\WMIEXE.EXEC:\WINDOWS\SYSTEM\DDHE... Read more

Read other 5 answers
RELEVANCY SCORE 34

Have been infected with Home Search Assistant. ARGHHHHHH!!!!!! Followed instructions on how to remove with no success, little sucker is so stubborn. Running Windows 98, so am I missing something somewhere. Can't seem to find the .exe file. This is not my computer, it's just a loaner...alot of stuff is on it and don't know what everything is for, a little hesitant to start deleting stuff. Also on dialup, so you can imagine how slow the internet has become. Any help would be greatly appreciated. ThanksLogfile of HijackThis v1.99.1Scan saved at 5:38:41 AM, on 2/19/05Platform: Windows 98 SE (Win9x 4.10.2222A)MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)Running processes:C:\WINDOWS\SYSTEM\KERNEL32.DLLC:\WINDOWS\SYSTEM\MSGSRV32.EXEC:\WINDOWS\SYSTEM\MPREXE.EXEC:\WINDOWS\SYSTEM\mmtask.tskC:\PROGRAM FILES\COMMON FILES\SYMANTEC SHARED\CCEVTMGR.EXEC:\WINDOWS\SYSTEM\MSTASK.EXEC:\WINDOWS\EXPLORER.EXEC:\PROGRAM FILES\COMMON FILES\SYMANTEC SHARED\CCAPP.EXEC:\WINDOWS\SYSTEM\USBMONIT.EXEC:\WINDOWS\LOADQM.EXEC:\PROGRAM FILES\SYMPATICO STARTER KIT\BIN\CONFSVR.EXEC:\WINDOWS\SYSSG.EXEC:\PROGRAM FILES\MICROSOFT OFFICE\OFFICE\OSA.EXEC:\WINDOWS\SYSTEM\SPOOL32.EXEC:\PROGRAM FILES\SYMPATICO STARTER KIT\BIN\GBCONMON.EXEC:\PROGRAM FILES�... Read more

A:FRUSTRATED

Download the attached zip file and unzip it to your desktop.http://www.mvps.org/winhelp2002/DelDomains.infRight-click on the deldomains.inf file and select 'Install'Download cwshredder 2.12 from here:http://cwshredder.net/bin/CWShredder.exeRun the file after it is downloaded and click on the fix button. Let it do its thing and when its done, even if it crashes.When its done run hijackthis again post a new log

Read other 10 answers
RELEVANCY SCORE 34

Hello everyone,

Below I have posted my HT log. I do not know what else to do. Here is the problem that I have been having for the past few weeks. My computer is running slower than ushaul. The other thing that shows that there is a problem with my computer is that my sound for my computer is messed up. Any music or sound clips that play are distorted and skip. I have AdWARE on my computer and have had to run that daily and it finds junk daily which is unushaul for my computer. I don't ushally have to run it daily. I also have McAfee Virus scan and have run that and it has found nothing. I had spysweeper, but had to uninstall it because I did find a problem assoiciated with it. I also make sure to run my disk cleaner every so often and clean out my temporary internet files and compress old files. I also defraged my computer recently as well. My computer is running a tiny bit better since I have cleaned some of the junk out. Yet, I know there is a problem, virus or other damage somewhere on my computer. I really hope someone can help me! Thank you!

Dawn

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 10:13:54 AM, on 1/29/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16574)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Microso... Read more

A:Please help! Very frustrated!

Hi, dawnlopez.

Welcome.

First, Download LSPFix.exe to a convenient location. Do NOT run this program. This is only to be used if you lose Internet Access after removing NewDotNet.

Go to Start > Control Panel > Add or Remove Programs and remove the following:

New.Net Applications or New.Net Domains (anything that says New.Net)

If it is not there, go here and follow Procedure 4: NewDotNet Removal Procedure 4.

In the event that you lose Internet access after removing New.Net, please double-click LSPFix.exe that you downloaded earlier. Check the "I know what I'm doing" button. You will see 2 panels. If there is any file listed in the "Remove" panel on the right-side, leave it as is and just click "Finish>>" then reboot your computer and you should now have access to the Internet. If nothing is listed under the "Remove Panel", do NOT do anything - just close the program. You will need to use another computer to come back here for further instructions on what to do.

Download new.netfix.exe by noahdfear. Save the file to your desktop. Double click, then click Start to extract the contents to it's own folder. Open the folder and double click the RunThis.bat file to start the tool. Follow the prompts and post the contents of the new.net.txt file it creates in the folder.
 

Read other 3 answers
RELEVANCY SCORE 34

I have A plethra of windows problems.I am running XP,I get constant error messages and my internet explorer is not functioning correctly,page cannot be displayed etc.
 

A:frustrated

what are the error messages?
 

Read other 2 answers
RELEVANCY SCORE 34

Hello... my name is Scott and I'm posting in hopes of finding some fortunate soul that can assist with curing my computer... I like this computer and I hate seeing it act like this... I recently had my Dell Dimension 2400 series reformatted and all programs reinstalled... its now been 2 months and my Dell is acting up... 100% CPU usage ALL THE TIME... seriously slowing down its performance... I have run Spybot in search of spyware and I have none... I "think" I have properly uninstalled all the unnecessary programs... I have Defragmented and Run a Disk Cleaner... I have 1.5 gigs of memory and am only using half of it right now... I consider myself a fairly intelligent person but this computer is giving me headaches... I read some other forums and/or tutorials but I don't want to try anything more without help from a "master" bleeping computer "guru" ...
please, I need assistance...

Messed up in MN...

A:Seriously frustrated...

Hello ,I know how you feel!! Let's do these first.Next run ATF:Please download ATF Cleaner by Atribune & save it to your desktop.Double-click ATF-Cleaner.exe to run the program.Under Main "Select Files to Delete" choose: Select All.Click the Empty Selected button.If you use Firefox browser click Firefox at the top and choose: Select AllClick the Empty Selected button.
If you would like to keep your saved passwords, please click No at the prompt.If you use Opera browser click Opera at the top and choose: Select AllClick the Empty Selected button.
If you would like to keep your saved passwords, please click No at the prompt.Click Exit on the Main menu to close the program.Note: On Vista, "Windows Temp" is disabled. To empty "Windows Temp" ATF-Cleaner must be "Run as an Administrator".Follow with MBAM:Please download Malwarebytes Anti-Malware (v1.32) and save it to your desktop.alternate download link 1alternate download link 2If you have a previous version of MBAM, remove it via Add/Remove Programs and download a fresh copy.Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program before performing a scan.If... Read more

Read other 9 answers
RELEVANCY SCORE 34

I have atttached my log. I have been having problems with removal of programs and can't load my xp professional from boot up to do a reinstall. Its saying I don't have a hard drive which clearly I do. I am very frustrated and hope that there might be something in this log that will fix the probs. Thank you for your time

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 11:02:57 PM, on 03/01/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16574)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\System32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
c:\program files\common files\logishrd\lvmvfm\LVPrcSrv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\WINDOWS\System32\DVDRAMSV.exe
C:\Program Files\Common Files\Motive\McciCMService.exe
C:\WINDOWS\system32\HPZipm12.exe
C:\WINDOWS\system32\PnkBstrA.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Canon\CAL\CALMAIN.exe
C:\WINDOWS\system32\wscntfy.exe
C:\WINDOWS\System32\Ati2evxx.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\Program Files\TELUS_eCare_Lite\eCareTrayApp.exe
C:\Program Files\Logitech\QuickCam10\QuickCam10.exe
C:\Program Files\Common Files\LogiShrd\LC... Read more

A:frustrated

I know you are suppose to wait 2 days before bumping your log up but i see that there has been 127 views on this with no replies. Is it because it is so messed up no one wants to touch it or is it fine. Thanks
 

Read other 2 answers
RELEVANCY SCORE 34

Hi,

I'm using Win XP Home. My problem is, when I am on the computer, sometimes it just stops working. To make it work again, I have to hit Alt-Del-Ctrl. Then I click all of of the Tabs that are in the Task Manager, then close it and it working again.

When I click the Tab "Processor" it has a lot of things active, and I do not know what has to be there and what shouldn't be there.

please help
 

A:I'm getting so frustrated.

Read other 6 answers
RELEVANCY SCORE 34

OK. First of all, Hi....I'm new to the forums, though I feel like I've been reading them forever now. I'm running Vista Home Premium (32) and currently using AVG Free and Adaware. My problem is that I'm unable to get hardly anywhere online, not even to gmail. It started off with not being able to use IE7 at all. I would open it, and would immediately get an error. I also was hearing advertisements in the background, even when the browser was closed. I was unable and am still unable to get to the Windows Update site. All I can see is that all updates since this started have failed to install. I'm unable to manually install any at all. The original error that started it all was: problem signature: Problem Event Name: APPCRASH Application Name: iexplore.exe Application Version: 7.0.6000.16851 Application Timestamp: 49f1c468 Fault Module Name: StackHash_8d13 Fault Module Version: 0.0.0.0 Fault Module Timestamp: 00000000 Exception Code: c00000fd Exception Offset: 100028b8 OS Version: 6.0.6000.2.0.0.768.3 Locale ID: 1033 Additional Information 1: 8d13 Additional Information 2: cdca9b1d21d12b77d84f02df48e34311 Additional Information 3: 8d13 Additional Information 4: cdca9b1d21d12b77d84f02df48e34311Before I installed AVG and was running trendmicro (which didn't detect any viruses at all) I tried to run a system restore, thinking maybe an update caused the issue or something. I tried several restore points and they all failed. I also attemped SF... Read more

A:I'M SO FRUSTRATED!!!

try this izzyliz
Please download Malwarebytes Anti-Malware (v1.38) and save it to your desktop.
alternate download link 1
alternate download link 2

MBAM may "make changes to your registry" as part of its disinfection routine. If using other security programs that detect registry changes (ie Spybot's Teatimer), they may interfere or alert you. Temporarily disable such programs or permit them to allow the changes.

* Make sure you are connected to the Internet.
* Double-click on mbam-setup.exe to install the application.
* When the installation begins, follow the prompts and do not make any changes to default settings.
* When installation has finished, make sure you leave both of these checked:
o Update Malwarebytes' Anti-Malware
o Launch Malwarebytes' Anti-Malware
* Then click Finish.

MBAM will automatically start and you will be asked to update the program before performing a scan.

* If an update is found, the program will automatically update itself. Press the OK button to close that box and continue.
* If you encounter any problems while downloading the definition updates, manually download them from here and just double-click on mbam-rules.exe to install.

On the Scanner tab:

* Make sure the "Perform Quick Scan" option is selected.
* Then click on the Scan button.
* If asked to select the drives to scan, leave all the drives selected and click on the Start Scan button.
* T... Read more

Read other 11 answers
RELEVANCY SCORE 34

Could someone please help me to get rid of the hijacker that keeps taking IE home page to about: blank or www.bestwebsites.com? Attached is my HJT log file and have absolutely no idea where to start. Would appreciate any help!! ogfile of HijackThis v1.99.1Scan saved at 10:46:43 PM, on 8/16/2005Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\spoolsv.exeC:\WINDOWS\System32\Ati2evxx.exeC:\PROGRA~1\Grisoft\AVGFRE~1\avgamsvr.exeC:\PROGRA~1\Grisoft\AVGFRE~1\avgupsvc.exeC:\Program Files\NavNT\defwatch.exeC:\WINDOWS\system32\HPConfig.exeC:\Program Files\HPQ\Notebook Utilities\HPWirelessMgr.exeC:\Program Files\NavNT\rtvscan.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\wanmpsvc.exeC:\WINDOWS\system32\MsgSys.EXEC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\Explorer.EXEC:\Program Files\Microsoft AntiSpyware\gcasDtServ.exeC:\WINDOWS\system32\msole32.exeC:\WINDOWS\system32\shnlog.exeC:\Pro... Read more

A:Frustrated!

Hello,I see you are having Logitech desktop messenger. If you don't use it, I suggest you uninstall it, because it's known that this causes a system slowdown and can cause errors.Please reboot after uninstalling. I also see that you are having Mcafee, AVG and traces of norton. It is a real bad idea to install more than one antivirus on your system, all having them running in the background the same time.. Several together can give problems and decreases the reliability of it seriously!So I strongly suggest to keep only one and uninstall the rest.Please don't forget to reboot afterwards!!You didn't unzip/extract hijackthis.. and it's still in the tempfolder.So I strongly advise to unzip/extract hijackthis.zip.Read here how to unzip/extract properly:http://metallica.geekstogo.com/xpcompressedexplanation.htmlCreate a permanent folder and move hijackthis.exe into it. The reason is because hijackthis creates backups and when it's in your temp-folder it can be accidentally deleted.How do you make a permanent folder:Click My Computer, then C:\ and then on Program Files.In the menu bar, File->New->Folder.That will create a folder named New Folder, which you can rename to "HJT" or "HijackThis".Now you have C:\Program Files\HijackThis. Put your HijackThis.exe there.It's better to print out the next instructions or save them in notepad, because you also have to work in safe mode without networking support, so this page wouldn't be ava... Read more

Read other 6 answers