Over 1 million tech questions and answers.

Set up workgroup server as time server and client setup

Q: Set up workgroup server as time server and client setup

I have 6 computers in a workgroup that need to be synchronized to a workgroup server. The server is a virtual Win 7 running on a Windows 10 host. Neither the server or client computers have internet access. I started the process by configuring
the host to use its CMOS clock as its time source, which seems to have worked. The client computers are not virtual and can communicate with the Win 10 host as I am able to RDP to the host from the clients. I made the following registry key changes to
get that accomplished.
Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\W32Time\Config]
"AnnounceFlags"=dword:00000005

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\W32Time\Parameters]
"Type"="NoSync"

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\W32Time\TimeProviders\NtpClient]
"Enabled"=dword:00000000

"SpecialPollTimeRemaining"=hex(7):00,00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\W32Time\TimeProviders\NtpServer]
"Enabled"=dword:00000001

<-------End of REG file------->

After applying these changes, I ran the following 'w32tm /config /update /syncfromflags: NO
I get a message that the command is successful.
These changes are based on the following post:
https://social.technet.microsoft.com/Forums/office/en-US/04865e36-d43d-4167-a07d-9f28fd4f22fa/how-do-you-configure-windows-time-synchronization-in-a-workgroup-with-no-servers?forum=winserverDS
However, when I do a net time, I get a message that no time data is found.
Next, I attempted to configure one of the clients to use the Win 10 host as the reliable time source using the following command, based on microsoft kb 875424

w32tm /config /manualpeerlist:TimeServerFQDNorIPAddress,0x8 /syncfromflags:MANUAL
/reliable:yesw32tm /config /updatenet stop w32timenet start w32timew32tm /resync
I get a message that all commands are successful. However, when I do the resync, I get a message that no time server is found. the command is successful. However, when I run 'net time', I get a message stating
'no time data is available.'

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Set up workgroup server as time server and client setup

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 128.8

I have 6 computers in a workgroup that need to be synchronized to a workgroup server.  The server is a virtual Win 7 running on a Windows 10 host.  Neither the server or client computers have internet access.  I started the process by configuring
the host to use its CMOS clock as its time source, which seems to have worked. The client computers are not virtual and can communicate with the Win 10 host as I am able to RDP to the host from the clients.  I made the following registry key changes to
get that accomplished.

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\W32Time\Config]
"AnnounceFlags"=dword:00000005

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\W32Time\Parameters]
"Type"="NoSync"

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\W32Time\TimeProviders\NtpClient]
"Enabled"=dword:00000000

"SpecialPollTimeRemaining"=hex(7):00,00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\W32Time\TimeProviders\NtpServer]
"Enabled"=dword:00000001

<-------End of REG file------->
After applying these changes, I ran the following 'w32tm /config /update /syncfromflags: NO 

I get a message that the command is successful.

These changes are based on the following post:

https://social.technet.microsoft.com/Forums/office/en-US/04865e36-d43d-4167-a07d-9f28fd4f22fa/how-do-you-configure-windows-time-synchro... Read more

Read other answers
RELEVANCY SCORE 90.8

i have the server with windows 2003 SP1 and i executed replication active directory, domain controller on the new server, as i have two servers. all expect one client computer work ok.onthe problematically computer is with the windows me.
problem is:
when i shut down old server,the computer with win me drop out from domain and he don't see new server.when i power on old server the client computer work ok.i deinstalled the win me on this computer and i installed to him win xp pro but problem is same. this computer don't see new server and he don't see others client computers in network.
what i do?
i tryed to make new user account but nothing i can't because of this computer don't see new server.
on client computer light green indicator on network adapter (Realtek 8139d) all the time.
i use commands: ping with the ip address of server, with the name of server nothing, ipconfig /release, ipconfig /renew, ipconfig /flushdns, ipconfig /registerdns.

ip address of old server is 192.168.0.100 and new server 192.168.0.101.
maybe problem is when i type ipconfig in dosprompt on new server
i receive: DNS server 192.168.0.100 and DHCP 192.168.0.100

plz help me thanks
 

Read other answers
RELEVANCY SCORE 88

Hi;
I am having the KMS Server with Server 2012 KMS Key,which is hosted on Windows server 2012 R2.

We need to update the KMS Server 2K12 Key to 2K16 KMS Key, Is there any way to Get the detail that the key will activate these OS Versions?

MBAM Report Feature Error Alert

Read other answers
RELEVANCY SCORE 86

Hi

I need to setup home network.at the moment i have one desktop at home.my requirement is that if i buy another system with minimum requirement and set it as client and my machine as server to surf the internet and use other applications, then from where should i start.
what is minimum hardware required?i have linux and xp both installed on my machine.
hope i defined the problem clearly. i am willing to provide more information.

please help. thanx
 

A:Home Network Setup for internet surfing and client/server

You need a router, not a server.
 

Read other 1 answers
RELEVANCY SCORE 85.6

The Microsoft Blog notes that they are tracking a Proof of Concept exploit. It targets the Client Server Run-Time Subsystem. The blog states that initial indications are that you need to be authenticated before you can take advantage of it. It affects Windows 2000 SP4, Windows Server 2003 SP1, Windows XP SP1, Windows XP SP2 and Windows Vista.http://isc.sans.org/diary.php?storyid=1965...The vulnerability is caused due to a double-free error in the handling of HardError messages within WINSRV.DLL...http://secunia.com/advisories/23448/

Read other answers
RELEVANCY SCORE 85.6

My organisation has 3 Windows 2003 servers (domain, mail, application). We are having very slow response time between server and client PCs in regards to opening/downloading/saving files from the server and working on software from client PCs that needs to communicate with the server. I am not sure if this was a problem from the day the servers were installed as i was not working here, but it is possible. The PCs are not the issue here as we tried it with different PCs across the years.

Thus i have the following two questions:

1. Could this be helped by increasing the download and upload speed of our connection? we currently have 8mbps download and 1mbps upload speed (this is for each server/pc). We are thinking of increasing it to 10mbps/10mbps and i was wondering if its worth it.

2. What might be the reason for the above problem?

thanks in advance
 

Read other answers
RELEVANCY SCORE 85.6

Hi,

I work at a tiny school which has no IT support. After a power cut, students are unable to log in to their individual users due to time being out of sync with server. I don't have info on local login info for these computers. Running XP. I can log in to server computer. Please help!
 

A:Client cant log in due to server time sync error HELP!

So the server date and time are correct? Are all computers affected or only one? How do you have the server password but not the local admin account for the workstations? There must be an IT department or IT contractor/firm somewhere for the school that you can contact for the credentials or for assistance.
 

Read other 3 answers
RELEVANCY SCORE 83.2

Hi,

I am having an issue with offline files created offline syncing back to the server. I have set up a network share to be available offline on a client computer. All files are available offline without issue. Here is the issue however. If I set the folder to work offline any file I create in the folder when it is offline just disappears when the folder comes back online, there are no conflicts or sync failures reported in sync center. If I create a new folder offline the folder does sync back to the server. Any changes made to an existing file are also replicated back to the server once the share is back online. So the issue is only with newly created files when the share is offline. I have not been able to replicate this error on any other file server in our environment, However I have recreated the issue with multiple shares with multiple Win 7 clients on this file server.

Steps taken so far.

Checked and reset permission levels on the share.
Recreated new shares from scratch for testing.
Disabled and enabled offline files on the client computer and cleared the offline cache.
Check various registry entry settings.
Disabled cashing on the File server.
Tested with XP the issue does not exist with XP.

I have spent hours researching this error online to no avail.

The clients are running Windows 7 Enterprise 64 bit
The File server is Server 2003 Standard 32 bit with SP2

Any help or ideas would be most welcome.

A:Offline Folder sync issue, Win 7 Client Server 2003 Flie Server.

I've seen the complaints about this problem but with no clear resolution. There are some hot fixes listed that may help, updating to Windows 7 SP1 is supposed to help in some cases but nothing seems for certain.

No way for me to recreate this problem but apparently others have the same problem.

Offline created files disappear after re-connect

Browse by Tags - The troubleshooters and problem solvers... - Site Home - TechNet Blogs

Administratively assigned offline files on Win7 client disappear from server (Network Steve Forum)

The Group Policy settings in the next link may have an effect on this problem.

http://mcpmag.com/articles/2003/11/0...ine-files.aspx

Read other 3 answers
RELEVANCY SCORE 83.2

There is a process running on my computer called csrss.exe
 
I went to http://www.processlibrary.com and looked it up and came up with 2 different things. One says it is a Trojan and needs to be removed. The same exact process name also says it is Microsoft client server runtime server and SHOULD NOT be removed.
 
How I am supposed to tell the difference so I do not make a mistake by either leaving it alone or removing it???

A:Process: csrss.exe (trojan or Microsoft Client Server Runtime Server?)

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything.
We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.
To help Bleeping Computer better assist you please perform the following steps:
*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/561994 <<< CLICK THIS LINK
If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.
***************************************************If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lower right hand of t... Read more

Read other 2 answers
RELEVANCY SCORE 82.8

As a christmas present I picked up a new laptop for my girlfriend and would like to have it all setup before I give it to her.

I have now spent a day and a half trying to get my homegroup network setup and running properly. I just finally was able to get the "join homegroup" option on the laptop (before I was only getting the "create" one both LAN desktop and WiFi laptop).

But now, when I enter the password and hit join I get an error message saying the laptop cannot connect to the homegroup, and the "trouble shooter" is running me in circles.

I've read that both computer must be running on the same time server and have the clocks syncronized with one another. The laptop connects to time.windows.com without any issues. No matter what I try on the desktop I get nothing but error messages. I've tried all default time servers, and many I have found online without any success.

Obviously I'm missing something, can you guys help me find what it is?

A:Time Server and HomeGroup setup

I would take a look at your router/access point/whatever it is that supplies your wireless. I'd be willing to bet it has some 'firewall' style functionality, and separates your wireless and hard lines into two separate networks.

Read other 2 answers
RELEVANCY SCORE 82

A friend is moving his business, and the new business park that he's setting up shop in does not have anyway to get any wired internet to his building, excluding a T1 line, which he can't justify the cost of.

One windows 7 machine acts as the server, primarily for Quickbooks database, and there are two other windows 7 machines that are clients, reading off said database.

He's getting one of those usb dongles for wireless internet service, for the server only (the other two computers will be tethered to a smartphone for internet for QB and windows updates periodically).

They do NOT want to share the servers wireless connection to the other machines.

My only concern was if the server will continue to try to check the LAN for internet connectivity, or will it check both network connections when one fails, or is there a setting I can tell them to change to ensure it knows to go to the wireless dongle for internet all the time, without interfering with the workstations talking to the server over the LAN to get to the database?

The setup at the old office was business class DSL, they are using a relatively new Linksys router, which had the DSL authentication information.

Thank you!

A:LAN network for server/client only, USB hotspot for server internet.

I managed to find a solution this morning, for anyone that's interested, the whole article is here: Multiple Network Connections at the Same Time on Windows | Ivan Zlatev

But the short answer is, under the advanced properties of TCP/IP v4, uncheck automatic metric, set your internet to a value of 1, and the LAN to a value of 9999.

Read other 1 answers
RELEVANCY SCORE 82

I'm looking at setting up windows 2003 terminal servers all over the place to replace the awful thing people are currently doing here - vncing servers with one small shared password among everyone <holding my hands over my ears for the backlash>. Don't blame me, it's another awful legacy I have to get rid of...

1. I've got to set up a Terminal Server Licensing server and was thinking about putting this on my second domain controller. I was wondering what would happen in this server dies, though. Is there some way of having resilience in this scenario? Perhaps a second Licensing server or something, the way you have 2 or more Domain Controllers?

2. Also, I know that Windows XP has an RDP client, I've used before on many occasions, but what about all the Windows 2000 clients that I still have out there. What should I do for them to access the new Terminal Servers?
 

A:Terminal Server license server(s)? RDP client for Windows2K?

I'm not 100% sure on #1, but I believe that the TS licensing becomes integrated into the AD, so if one DC goes down, the other one will be able to check licensing. On another note, if you are using the TS for administration only, I don't believe you needs the TS Licensing to be installed.

For #2, you can download the latest version of the RDP client from MS's website. It should also be available through Windows Updates, although I think Win2K isn't supported any longer, other than Critical Updates.
 

Read other 1 answers
RELEVANCY SCORE 82

was trying to network my computer to the server but keep getting the message 'server not responding from client computer' can anyone help please.
 

Read other answers
RELEVANCY SCORE 82

Hi I'm working on a client/server with the Java programming language and trying to figure out how to protect my server. With my current Virus/Firewall protection suite theres nothing I can do to keep out unwanted Java applications on the port I choose to allow the Java SE Binary through for clients accessing the server application. ESET Smart Security 4 is what I am using. Does anybody know of a security suite that would allow only a specific Java application to get through the firewall? I'm not to sure on this subject because my firewall is identifying any Java application as only the "Java SE Binary" and not I'm sure if you can even really name your Java application like you would something you would write in C++. Any information would be appreciated, thank you.
 

A:Java Server/Client + Server Firewall Safety

Read other 6 answers
RELEVANCY SCORE 79.6

Why we should setup a self-owned DNS server and Proxy server for enterprise environment, rather than using an external free service.

Read other answers
RELEVANCY SCORE 77.2

XP Pro SP2, all latest updates. When I reboot, I can correctly sync to a time server, but after an unknown amount of time it goes back to saying "The RPC server is unavailable" instantly after clicking Update Now, regardless of what server I tell it to sync to. I also noticed that if I view my nForce Networking Controller status, then click Properties and go to the Authentication tab, everything is greyed out. If I hit OK without changing anything (I can't change it even if I wanted to), a message pops up saying "An unexpected condition occured. Not all of your requested changes in settings could be made" and just goes back to that window. I have to hit cancel to close it. These two issues seem to be related since right after I reboot, the Authentication tab works normally (as well as the time sync like I mentioned above), and they both seem to stop working at the same time. I have no idea if it happens after something I run or if it's just after a certain amount of time or what. Any ideas?
 

A:Solved: Unable to sync to time server - RPC server is unavailable (but more)

I have the same problem exactly. There is an article at Ed Bott's Windows Expertise (http://www.edbott.com/weblog/?p=1779) tyhat discusses problems with the Windows time Server, but nothing he suggested worked for me. It just won't update...no matter what server I choose.
 

Read other 2 answers
RELEVANCY SCORE 77.2

Hi all ,

This is my first post on this website , i hop i can find some one to help me .
The problem is i installed windows 2003 server on my computer and i don't know how can setup ftp server and web server on it ? i create the domain but i faild to do the rest . I have MCSE 2000 but i feel i don't take anything , I am looking for any help like pdf file or book can i buy .
also the register.com ask me for dns server on my home page , is it the dns ip address comes with my ip static address or not ?

Thanks for help !!!
 

A:SETUP FTP & WEB SERVER ON WINDOWS 2003 SERVER ...HOW ?

Control panel. add/remove programs, on the left add/remove windows components, application server, iis. Click on details of iis for ftp.
 

Read other 1 answers
RELEVANCY SCORE 76.8

Hi,
I would like to know how to configure a Windows Server that will host a windows Diskless Client, I've read a lot of forums and blogs regarding this subject and I even tried to applied those summarized guide but until now I'm still stuck, and I hope someone
in this forum can help me or give me a detailed guide to this particular subject. I would really appreciate whatever suggestion or support that may give to me. 

Thank you,

Read other answers
RELEVANCY SCORE 71.2

Hello everyone,
I need to create a PowerShell script to get the inventory of servers in a workgroup. Please help me on this

Read other answers
RELEVANCY SCORE 71.2

I would like to know how or if I can have a NT server show up on my network easily.

Currently on a XP Pro pc, in My Network Places, I can see lots of different drives and such on workstations on my network. This also includes any mapped drives on the NT server(s).

When I go to My Workgroup Computers, after what I think is an excessive delay, I can then see all pc's in my workgroup. But not any of the NT 4.0 servers.

I then click on Microsoft Windows Network, I can then see the workgroups and the servers. I can then get to the servers by clicking a couple more times and then loggin in.

This process is similar to what I have to do with my Win98 pc's, but they respond much faster when going over the network for some reason. Even with them the servers do not show up in the workgroup.

Also, is it typical for the XP pro pc's to be slow to update the screens when navigating from place to place?
Thanks
 

A:Can a NT 4.0 Server show up in a workgroup?

I am running Norton Internet Security and I notice no change in responce with it disabled.

I am running 100 baseT.
 

Read other 1 answers
RELEVANCY SCORE 70.4

I have a W2K server that is setup as a Domain Controller with active directory. I want to get rid of the domain and simply join a workgroup and share some folders off of it drive. What is the best way of doing this? do I need to run dcpromo?

thanks,
 

A:W2K Server Help (change from domain to workgroup)

Read other 6 answers
RELEVANCY SCORE 70.4

So basically I need a little clarification. I want the know differences between homegroup networking on windows 7 ultimate VS Windows server 2008. I have two computers at home running xp and the other running windows 7. They are both on my homegroup so we can all transfer files. What I want to do is I want to install a 500gb HDD on one of the computers and make the drive our media source. I want to install home server on a partition on my primary computer if I go that route. But is that worth it?

A:Workgroup VS Home Server 2008

  
Quote: Originally Posted by EvolutionZero


So basically I need a little clarification. I want the know differences between homegroup networking on windows 7 ultimate VS Windows server 2008. I have two computers at home running xp and the other running windows 7. They are both on my homegroup so we can all transfer files. What I want to do is I want to install a 500gb HDD on one of the computers and make the drive our media source. I want to install home server on a partition on my primary computer if I go that route. But is that worth it?


Homegroup allows for sharing, server allows for sharing and having more than one user open the same file.

Read other 1 answers
RELEVANCY SCORE 70.4

I have a customer with a machine running Server 2003 but it is only a member of Workgroup, there is no domain. None of the existing PC's are members of any domain, they are all just members of a workgroup. None of the existing PC's have
any passwords. The Administrator Password on the server is blank.
They have a new PC (Win7) and I can't for the life of me get the new PC access to the shared folder. Any ideas? 

Read other answers
RELEVANCY SCORE 70.4

I have a mixed network running 9x machines and XP/2k pro, on my NT Network

Every now and then my 9x machines lose the facility to browse through netwrok neighbourhood??, i have found an M/soft article that pointed to blaming the 9x machines trying to be master browser, yet there are none with that setting and it is still occuring randomly through the day.

this is causing me headache as i am losing my printers
 

A:Workgroup Losing Connection With NT Server

Master browser will cause you a migraine that can bring forth insanity. We actually had a problem with machines trying to take over as the master browsers at school.

When a machine has an address that may not nessisarily coinside with the over all addressing schema, that machine will try to take over as the Master Browser. This is not 9x specific either, we dont run anything but 2kpro, server, and advanced server.

Solved: Set the problem machines IP addresses to auto obtain. If the machine has to look to the DNS server to get an address, it will not try to be the master browser.

Hope this helps you!!
~ Lyrical ~
 

Read other 1 answers
RELEVANCY SCORE 70.4

Hi group: for various reasons which I won't go into, it was necessary to remove the domain controller and active directory from a Win 2k server install. We've converted it back to a workgroup system. All is well (after some fighting! ) but we no longer have much in the way of programs... more seriously, the "system tools" folder off the start menu doesn't exist making it very hard to find the various msc and other files to control the beast.

any ideas how I can restore these links? There are, of course, no backups (I hate working on non-profit organization computers for free!!!!! )
 

Read other answers
RELEVANCY SCORE 70.4

Does anyone know of a good program allowing you to restrict access to certain programs on the PC? I have been using Apple's Workgroup Manager for my Mac's but now I need something for Windows. I need to be able to restrict and grant access to Applications for Windows XP Clients on a Windows 2003 Server. Thank you.
 

A:Windows Server & Workgroup Manager

Read up on Group Policy.
 

Read other 1 answers
RELEVANCY SCORE 70.4

The company has approximately 15 computers, all with Win XP Pro, and a Dell Server with Win 2000. They have high speed internet service through cable modem, and have multiple 5-port hubs to split the signal. Everything works great. The printers are shared, file sharing, etc. The problem came when the company tried to expand about 4 computers to another room wirelessly. I connected the DLink DI-514 802.11b Wireless router to one of the open ports on the hub (all Linksys products). I am able to sign on line no problem through wireless cards. just can't get into the workgroup. No domain set up. Strange problem. anyone have idea?
 

A:Problem connecting to Server workgroup

Are you using DHCP on the new router? Are those systems using a different IP range than the rest of the network?
 

Read other 2 answers
RELEVANCY SCORE 70.4

When I try to put in a domain name under my computer it says the following error occured while trying to validate the name shore-tech. This condition may be caused by a DNS lookup problem. For information about troubleshooting dns lookup problems, please see the following website. http://go.microsoft.com/fwlink/?linkid+5171
the specified domain does not exist or could not be contacted. When I set up the server I did not set it up as part of a domain because I didn't have a domain name then. I do now and would like to be able to use my server for pop 3 mail etc. Any ideas?
Jerry
 

A:How do I make my server a domain instead of a workgroup

Whats your server domain.name ? Notice that when you cannot chnage computers name with a '.' user localhost, or your computer name when accessing files on your compuer yourself... for other you can give people your ip address, and make a blind redirection... www.dyndns.org
 

Read other 2 answers
RELEVANCY SCORE 69.6

I've been having a little bit of difficulty reestablishing a wireless network that used to work. Right now, I've been trying to fix one problem at a time, and I've been focusing on the server. My question is, I was wondering what it means when the server is able to ping it's own address as well as it's own computer name, but the computer name does not appear under My Network Places>Entire Network>Microsoft Windows Network>"workgroup name"

Appreciate any help you can offer!
 

A:Server Name not appearing under Workgroup Name in My Network Places

Read other 13 answers
RELEVANCY SCORE 68.8

Can I change a NT server from a Domain server to a workgroup server without re-installing NT? Any help would be useful, I DO NOT want to have to re-install NT.
 

A:{Advice Offered} - Changing a NT server from Domain to Workgroup

Greetings

www.algintech.com/UTools/UPromote.asp

This piece of software will let you upgrade Member servers to Domain Controllers, and demote domain controllers to member servers.

Technically, if you disable the netlogon service on your PDC/BDC it should stop answering logon requests. I personally wouldn't try it on mine but it may save you from reinstalling.

You can also change the settings on all your Workstations to still use the Client for Microsoft networks, but to NOT log onto an NT domain (untick the box in the properties of Client for Microsoft Networks). And for NT Wks machines, you can take it out of the domain and add it to a Workgroup.

Cheers

------------------
Reuel Miller
Windows NT Moderator (yes, that does make me biased )

[email protected]

Website: www.xperts.co.za/multiboot

Every morning is the dawn of a new error...

[This message has been edited by Reuel Miller (edited 12-20-2000).]
 

Read other 1 answers
RELEVANCY SCORE 68

Hi All

I want all incoming and outgoing data from my PC to be more secure, so I
I want to set up an SSH server on my Home PC using Cygwin, but I also want the SSH client to be on my PC. Is this possible, or do I need to have an external/second PC to act as the server? Also, if all my internet traffic goes through this SSH server, how will it affect my normal browsing? Will I have issues connecting to my regular websites (youtube, facebook, msn, yahoo, gmail, etc etc)?

Thank you

A:SSH server and client on the same PC

Umm...that is not going to make anything more or less secure. SSH is for creating secure connections to remote systems. (Mainly for administrating) It creates a VPN in a way. It does not make your browser usage secure. Connecting to an SSH server on the local machine is pointless anyways. You are already on the local machine!

Read other 4 answers
RELEVANCY SCORE 68

Dear sir,
i am working in a company as it admin. i am managing all system as client/server . in client machine i am using xp sp2 where as in server using windows 2003. couple of weak ago a very important file is deleted from the server. I don't know who has this file deleted . plz suggest me.
Q.how would i identify that from which machine has this file been deleted.
i have to know the user name with machine or ip address.
Q. is it possible to know the machine name and ip addess from the file of deleted machine(client).

Read other answers
RELEVANCY SCORE 68

Hi, my ultimate goal for my questions is so that my laptop can access my home LAN anywhere as long as it has the Internet. For example, I have network shares named \\A\Z, \\B\D on my home network. My laptop, when it is in the LAN can just map those shares. Well, I want the exact same kind of direct access anywhere with the internet.

I've already gotten an account with No-IP, so the dynamic IP problem is taken care of. I've also created an incoming VPN connection on my LAN server and a VPN connection on my laptop and the connection actually got connected, but the subnet mask is always 255.255.255.255 and I cannot access the LAN.

The solution I'm trying right now is to use Windows Server 2008 R2 gotten from DreamSpark and Microsoft ForeFront (actually its predecessor ISA Server which I got from an IT course I've taken) which amount other things is a VPN Server. However, there must be an easier solution than to use Enterprise grade software right?

By the way, I do know there are easier solutions like Dropbox, but I just want to know how to do it.

A:VPN client and server

You need to make sure that you've got your routing and remote access server role configured correctly. You should be receiving an IP that allows for browsing the network, although netbios doesn't always work easily depending on the network topology. A couple of simple issues I've encountered are things like trying the VPN from within the network (rarely works), connecting from a network with the same subnet as the one you're connecting to (having the internal network 192.168.1.x locally and the network being connected to having the same 192.168.1.x address range), and lastly having firewalls not play nicely. I don't think you're having that issue since you've received an IP, albeit one that has a restrictive subnet mask. Start by checking the routing and remote access configuration on the server to make sure it's handing out the correct information to remote clients.

Read other 1 answers
RELEVANCY SCORE 68

I have just assumed responsibility for a private school LAN. We have 27 clients running win 98 and a file server running NT server. Users can reach the internet weather they log into the LAN or not. How to I amend this so they must be logged in to surf the net?

We are using a Web Ramp connected to the hub. All the clients are set to automatically configior an IP add.
Thanks In advance
 

Read other answers
RELEVANCY SCORE 68

Hi guys, I'm pulling my hair out here trying to understand Winsock headers.

My lecturer must have a sick sense of humour as he's set us the task of writing a UDP client/server after only studying C++ for 2 months.

I've managed to get a server up and listening to a socket. I've got the client to send the message and the server to pick it up and print it to screen.

The remaining horrors are

1) Read the IP address of sender and print to screen... just reading to a vairiable is the bit I'm stuck at.

2) Echoing the message back to sender and reading it...I'm a bit lost on this - can this be done with a simple swap from a send to receive socket? And how does the server get the info to send to client - may be related to 1) above.

Any help you guys can give would be great.
 

Read other answers
RELEVANCY SCORE 68

My friend and I set up an FTP server and client system, it was working fine at his house (on the same connection together) and again fine at my house (on the same connection again). So we leave back to our houses and try it and it doesn't work. I have FlashfXP and BulletProof FTP Server. Are there settings I can change or someway my firewall is messing it up. Thanks,
Chad
 

A:FTP Server and Client Help

yes please help
 

Read other 3 answers
RELEVANCY SCORE 68

what "Makes" a server a server, and a client a client.

In other words, what would you expect to see running (software wise)

If you had say

XP
2000
NT

if somone asked you "is that a server or a client" how could you tell ?

cheers
 

A:server/client

Read other 8 answers
RELEVANCY SCORE 68

Im thinking about getting windows server 2008 and building a machine for it to use as well, a server, for storage and hosting multiplayer games.

So my question is, how much faster or smoother would a dedicated game server run on a actual server machine rather than a peer to peer client machine?

Would i beable to notice the benefits? Would it be a waste of money?
 

A:Server or Client?

It would be a huge waste of money in a home setting IMO. There is very little to be gained, and the server versions of Windows are pretty costly.
 

Read other 1 answers
RELEVANCY SCORE 67.6

I have a windows 7 domain account and used to have a share set up on a workgroup server. Now I can see the server but none of the shares. If I log in with my local account I can see the shares. Not sure why my domain account can't see the workgroup share. 

Read other answers
RELEVANCY SCORE 67.6

Can any one suggest me Step by Step guide to setup Network File Server and Network Print Server

Operating System if possible XP otherwise Windows 2000 Server
Thankssss a lot in advance
 

A:Step by Step guide to setup Network File Server and Network Print Server

1. RTM (Read The Manual for the Network File Server).
2. Follow the manual's instructions for setup.
3. RTM (Read The Manual for the Network Print Server).
4. Follow the manual's instructions for setup.
 

Read other 1 answers
RELEVANCY SCORE 67.2

First the good news:

I have three computers on this network, 2 Win2k worksatations and a Win2k server. Also, there is a 4 port Linksys router between the cable modem and the rest of the computers.

All computers are running TCP/IP with Obtain IP address automatically enabled. All computers can access the Internet and the router sees all three computers. It has also assigned them internal IP addresses (192.168.1.100 /101 / 102).

From the server I can ping all three addresses and get positive results. I can also search for the computers and find them, albeit not the same way for both. A simple search shows one and I need to use the *.* to find the other.

Now the bad news:

Neither workstation sees the server, even with a ping. And when I go to the properties (right click My Computer/Network ID/ properties) I am not able to join to the domain. It says the Network Path is not valid. And yes, I've added the computers to my server.

What might I be missing? Help please
 

A:win2k server/client

Read other 6 answers
RELEVANCY SCORE 67.2

I'm trying to use a VPN connection with a remote server. I need to extract data from a server that needs this connection for security purposes. The only way to run the software on this server is to use a terminal server client connection. I'm using WIN XP, but the server is running NT 4.0 Terminal Server edition. Once I open up the terminal server connection, the VPN connection will not connect. Now, reverse logic, if I open the VPN connection first, the terminal server client connection will not work. Is there a way to have both open at the same time with the OS's I have currently? Or is there something I need to change to get this to work?
 

Read other answers
RELEVANCY SCORE 67.2

Is it not possible to make a program be both a client & server? I'm new to the winsock control & just finished reading PINO's basic intro. I did the peer-to-peer project for client/server chat. However, I want the program to be both a server & a client so two people don't have to worry about one being the server & one being the client.

I have the code for the program to listen. However, when I put the code for it to make a connection & click the button for that code, it states "invalid operation at current state".

So is it possible to have a program be both a client & server? I think it is and maybe it needs 2 winsock controls? Any help is greatly appreciated.
_________________
game downloads bad debt consolidation re mortgage
 

A:winsock - client AND server

Here you can find an example in C++: http://www.codeproject.com/KB/cpp/WSFileTransfer.aspx?df=100&forumid=288198&exp=0&select=1435288

If you want to run client and server from the same exe at the same time, you should use threads (or fork).
 

Read other 1 answers
RELEVANCY SCORE 67.2

Our network has 27 PCs, all clients, hooked up to switches, a router and cable modem. Mostly WinXP, some Win98. Inter-office email is handled by MSMail, which is not supported under xp. When there is a fix for me to apply, it requires me to go to each station. That used to be okay when we had 10 PC's but we're headed for 30, and net admin is not my only title. I thought I'd ask for opinions. You can answer one or all of my questions...every opinion will be helpful.

1. At what number of nodes does a client-client network no longer function well?
2. What are some of the pros and cons of using a server-client network as opposed to client-client?
3. Do you think administering a server-client network is more or less time-consuming than client-client?
4. Do you know of a website or two where I can go to get more information on this subject?

Thank you for your time.
 

A:Should I move to server-client?

Read other 9 answers
RELEVANCY SCORE 67.2

I have a small domain set up in my house for my MCSA studies. I'm using Virtual PC and have a Windows Server 2003 Enterprise Edition DC/DNS server and one XP Pro Client. Server01 and Client01.

I have created a User account for myself in Active Directory and am a member of the Domain Admins. Client01 is shown as a member of the domain both in AD and in it's own System Properties. I can ping the server from the client and access it in My Network Places. However, I cannot ping the Client from the server, nor can I access Client01 from My Network Places on the Server.

I am also able to log on to the client using my domain username and password. This has me stumped.
There is no firewall running on either machine. I even checked IE security settings but that isn't the problem. Any ideas on this would be greatly appreciated.
 

A:Can't ping client from server

Read other 9 answers