Over 1 million tech questions and answers.

Fibocom L850-GL on T480 - "Windows has stopped this device..."

Q: Fibocom L850-GL on T480 - "Windows has stopped this device..."

I have a T480 with a Fibocom L850-GL WAN card. Frequently, but all the time, when waking up from sleep, it fails to appear in my Wireless options, and when I look at it in the device manager, under Device status Windows gives the message "Windows has stopped this device because it has reported problems. (Code 43)" I see others have had some problems with this card, but I haven't found this specific issue. I've installed the latest drivers as of today (2018-07-28) but I'm still having this problem. If I manually disable and re-enable the device it always comes back, but it's pretty annoying to have to do that. Before I contact Lenovo for repair (the laptop is only a couple of weeks old) I wanted to check the forum for any ideas. Thanks!

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Fibocom L850-GL on T480 - "Windows has stopped this device..."

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 122

 Hello All, New T480 with the Fibocom L850-GL wwan card. Clean install of Windows 10 Pro x64, Redstone 4 (v. 1803). All Windows Updates applied. All Lenovo updates applied through the Vantage app via the Microsoft Store, and manually checked from the support page of the website (BIOS, WWAN, etc. updates). Following the manual, I pulled the external battery, disabled the internal battery, then inserted my T-Mobile USA sim card, then reassembled everything, then rebooted. Manually installed the latest L580-GL drivers from Lenovo. First off, the L850-GL is being shown as a USB device, as opposed to PCIE, with a hardware device instance path of USB\VID_8087&PID_0AC9&MI_00\7&4FA6012&0&0000, and a hardware location of 0000.0000.0000.003.000.000.000.000.000 in the properties dialogue screen in Device Manager. The Driver tab shows the provider is Microsoft with a date of 4/10/2018 and a version of 10.0.17134.1.... I suspect much of that to be a sign that something isn't right from the get-go... Second, every time I close the lid of the machine or leave it running long enough to enduce the proper level of sleep/hibernation, the card simply stops (with a hardware error 43 warning in Device Manager). At that point, my "T-Mobile LTE" network option no longer appears in the Windows 10 notification/network connections sidebar. My only recourse thus far has been to uninstall the L850 in device manager, "Sca... Read more

Read other answers
RELEVANCY SCORE 98

Anyone know where to buy the antennas for this product Thinkpad Fibocom L850-GL CAT9 M.2 WWAN. I would be a great help. Also do I need a professional to install these cables?

Read other answers
RELEVANCY SCORE 88.8

Until yesterday, the Fibocom L850-GL worked perfectly in my T480. After a restart, the device was gone and instead the error message "Detected unrecognized USB driver" appears permanently three times in the system log. The device manager recognizes a USB-Com device instead of the Fibocom. Detected unrecognized USB driver (\Driver\pci).Detected unrecognized USB driver (\Driver\ACPI).Detected unrecognized USB driver (\Driver\UDE). Even after a clean Windows 10 Pro (1803) installation, the error is repeated.The original installation of Windows 10 Pro (1803) immediately detected and installed the Fibocom.BIOS is up to date. For now I deactivated the device. Any hint? 

Read other answers
RELEVANCY SCORE 86.8

I am receiving an error when I try to connect to the cellular network with my X1C7: "Can't connect to this network. Enter an APN and try again" I have tested this SIM card in T420 and it can connect successfully. Win 10 is updated to the latest, all drivers too, but still no success. Output from the cmd shows that the SIM card is recognized and registered on the network, but still no successful connections: One thing I did notice is that my driver is "generic mobile broadband adapter" released by Microsoft and no matter what I try to install the Lenovo one - removing, choosing manual update, it still stubbornly chooses the generic one.   

Read other answers
RELEVANCY SCORE 83.2

Hi allMy WWAN was working previously. I have updated my Windows to 1809 October update.However now my WWAN toggle is missing in windows 10 I can see in device manager -Network\ Fibocom L850-GL is missing (shows up in hidden devices) - as error 45 - not connectedSystem\ Intel XMM7360-P is listed as working I've sinced downgraded - but still can't find the toggle.Anyone have problems after updating windows?  Or anyone NOT have problem after updating?  Thank you 

Read other answers
RELEVANCY SCORE 79.6

Fibocom L850-GL 4G LTE-A cat 9 is orderable with X1 Yoga 3rd Gen. Could it be installed in my X1 Yoga 1st Gen to upgrade the current em7455? If the bios whitelists are shared perhaps the vid/pid for the Fibocom L850-GL 4G LTE-A cat 9 is in the list and it will be accepted. Or is it a pipe dream? I want to stick with 1st gen as the 3rd gen lacks OLED screen option, which I have.

Read other answers
RELEVANCY SCORE 79.6

I am considering buying an X1C gen 6.The model that is available in my region is: 20KH007JIVAccording to https://psref.lenovo.com/Product/ThinkPad/ThinkPad_X1_Carbon_6th_Gen?ch=20kh007It has a Fibocom L850-GL. Does it work with ubuntu 18.04 ? I mean does it work reliably after editing some files here and there or it's a mess ? (I am ok to edit some configs if required). Should I check anything before purchasing ? (I am plannig to only have Ubuntu 18.04 on it for development).I know there seems to be some problem with sleep mode but there are acceptable workarounds. Thank you in advance !

Read other answers
RELEVANCY SCORE 78.8

I know this is an old issue, but I can't solve the problem.I've downloaded the last drivers (June 2019) from Lenovo website but still WWAN doesn't work. Diagnostics says SIM is blocked by PIN2 but there is no way to add PIN2 (or PUK).Should I send the laptop to a repair center?Thank you in advance for your helpMassimo 

Read other answers
RELEVANCY SCORE 78.8

I want to know if a Lenovo P52 WWAN card will permit me to use that laptop as an additional device in our Google Fi account, which we use for our Android phones.  The card Fibocom L850-GL 4G LTE-A cat 9 is listed as available for P52 workstations.  A Fi chat said that I should use a "data only SIM card", but that does not help me unless I know how to use that in the P52.   I understatnd that the Fibocom card is supposed to work with Verizon, but I want to know if it will also work with Google Fi.





https://www.ingber.com

Read other answers
RELEVANCY SCORE 78.8

I want to know if a Lenovo P52 WWAN card will permit me to use that laptop as an additional device in our Google Fi account, which we use for our Android phones.  The card Fibocom L850-GL 4G LTE-A cat 9 is listed as available for P52 workstations.  A Fi chat said that I should use a "data only SIM card", but that does not help me unless I know how to use that in the P52.   I understatnd that the Fibocom card is supposed to work with Verizon, but I want to know if it will also work with Google Fi.





https://www.ingber.com

Read other answers
RELEVANCY SCORE 78.8

Hello,   I consedering buying a THINKPAD X1 CARBON (GEN 7), the Fibocom L850-GL 4G LTE CAT9  is included in the price, I guess it is used to acces 4G network with a SIM card exactly like a smartphone. But in this case what is the use of the wwan option ? As far as I understand it is also used to acces  cellular network ?What is the difference ? Please feel free to explain if I got this wrong  Thx

Read other answers
RELEVANCY SCORE 78.8

I can't seem to establish a cell connection with my 6th gen Carbon X1 and new Fibocom L850-GL WWAN.  I'm using a Verizon SIM - all seems fine from the VZ side, and the machine is correctly recognizing the SIM, but I can't for the life of me get it to make a connection.  All I see is "No Service" from the Windows wifi manager, although the VZ "advanced options" confirm that there is an active account.  Anyone got any ideas on how to make this connect?  The Carbon X1 is fully updated and only recently imaged - latest drivers/firmware applied. Thanks in advance for any help!!!

Read other answers
RELEVANCY SCORE 78.8

I bought a wwan card (Fibocom L850-GL). Installed it and was everything all right. I ran System Update today, which found an update V.2.0.1.44, which I installed. System Update suggested me to restart my laptop. I did so an since than the following happens: System Update finds the very same update again and again. (And shows it in the history as installed update.)Cellular connection does not show up among available networks.No trace of the device in device manager, so I am not able to reinstall it or go back to an older version.Windows beeps sometimes, as if a new device was found, but nothing happens.Any idea is wellcome! Thank you!

Read other answers
RELEVANCY SCORE 77.6

I bought X1 Carbon 6th and X280, both with Fibocom L850-GL. WWAN with Linux do not work. I searched and found the reason. The PCI-E must be disabled, so that the card can run with USB. It seems that Lenovo did not offered a solution since July 2017.  I searched but do not find any direct contact to Lenovo to ask the question.  The WWAN is important for me and Windows is no option anymore. Anybody know if there is an other WWAN card wich works with Linux  and X1 Carbon 6th / X280 ?Anybody know if there is a chance that Lenovo solve the problem with a bios update? Many new Lenovo Thinkpads have this Fibocom L850-GL inside and many business user use Linux...

Read other answers
RELEVANCY SCORE 76.8

Hi ,I have issue about WWAN Fibocom L850-GL+Antenna  after i bought it and installed already.I has follow this step:1.update bios to version 1.4 and enable wwan2.all update new drivers include fibocom 850-GL from lenovo websiteProblem is why i can't see the cellular network show in my network connection?Can anybody give me advise?My laptop is X1 carbon gen6th Machine Type Model: 20KGS45M00Processor: 1x Intel Core i7-8550U Processor(Core i7-8550U)Memory: 1x 16GBLPDDR3-2133Operating System: Windows 10 Pro 64(EN:English)Hard Drive: 1x 256GBSATAM.2Wireless Network: 1x Intel Wireless-AC 8265 2x2 ACPorts: 1x Microphone/Headphone JacksCamera: 1x 720p HD Camera with Array MicGraphics: 1x Intel UHD 620Monitor: 14.0 WQHD LEDThank you very much for your time and assistance in this matter.     

Read other answers
RELEVANCY SCORE 76.8

Windows device manager shows it as not connected. But it has been working just a week ago! Hardware or software?

Read other answers
RELEVANCY SCORE 76

We have ~750 T480s (model 20L8S4HL00) laptops running Win10 Enterprise 1703 in our environment, and at least 35 of the laptops have non-functional Fibocom L850-GL WWAN modules. What makes matters worse is that this issue can also cause repeated BSoDs, sometimes multiple per day. Problem Symptoms and Actions TakenThe "Intel(R) USB Flash Loader utility" / "Fibocom USB Flash Loader Utility" repeatedly connects and disconnects roughly once a minute, and when doing so the Windows "device unplugged" sound is heard. The HWID of this device is "USB\VID_8087&PID_07F5\5&1AD8E564&0&6". Refer to the screenshot below The frequent and repeated hardware disconnections cause problems with the enterprise security software we use for encrypting external media, to the point that after a certain point the computer experiences a BSoDThe only associated driver that remains active in Device Manager is the "Intel(R) XMM7360-P WWAN", all other associated WWAN drivers show up as hidden with code 45 (disconnected)If all WWAN drivers are uninstalled and the drivers are deleted, the only devices that are subsequently discovered are the flash loader utility and the Intel XMM7360, all of the others are no longer found and Windows cannot seem to find them againInstalling all of the latest device drivers and firmware using the Lenovo System Update tool do not mitigate this issue, nor does manually uninstalling/reinstalling the WWAN driversTemporarily disabling the built-in... Read more

Read other answers
RELEVANCY SCORE 76

https://www3.lenovo.com/us/en/laptops/thinkpad/thinkpad-x/ThinkPad-X280/p/22TP2TX2800Because I need LTE900 (Band 8) for my LTE module.  Is my model support with Fibocom L850-GL 4G LTE-A Cat9 which in the list of x280?Lenovo Part no. : 01AX786

Read other answers
RELEVANCY SCORE 76

So I just added a WWAN card (Fibocom L850-GL (FRU 01AX792)) to the X1 Yoga 3rd Gen, but the typically "pre-installed" Antenna is not pre installed, I guess next year the Sim slot won't be there if you don't buy it out the door with it.  Does anyone know the Lenovo FU... i mean FRU... Part number for the WWAN Antenna for (Fibocom L850-GL (FRU 01AX792)) These connectors are tiny.  

Read other answers
RELEVANCY SCORE 76

Over the last few weeks, I've had at least a half dozen T480s that have severe spikes in latentcy and packet loss when using the Fibocom L850-GL, making them pretty much useless for our users who need them for remote desktop.The usual "working" baseline for these machines on our network is around 40-70ms pings. Show below are the occasional spikes past 3 seconds and timeouts along with the current firmware.    The work around I was using to fix this problem was uninstalling the drivers/firmware from Device Manager, and letting Windows reinstall them, but that doesn't seem to be working anymore.  Any help would be appreciated.

Read other answers
RELEVANCY SCORE 75.2

I have a X1 Yoga 3rd Gen equipped with the Fibocom L850-GL LTE modem, using a Verizon LTE sim. I ran into this issue whenever I'm using the LTE connection at high speed, Windows 10 has a high chance of crashing (BSOD). This can be easily reproduced by running a speed test on speedtest.net. I'm in an area with good LTE signal, and my speed on the Verizon sim can reach around 200 mbps. When running the speed test, whenever it goes past around 130mbps, it has a pretty high chance of crashing. It's almost as if the module cannot handle that speed (maybe heat/power related). I'm on a clean installation of Windows 10 1809 with the latest Lenovo drivers (including the Fibocom modem) installed. Anyone else is having this issue?

Read other answers
RELEVANCY SCORE 70

Hi! I have a new T480 with the factory installed WWAN option. It works on a fresh startup, but when the laptop goes into hibernate mode (not sleep) and then I wake it up, the WWAN stops workding. Windows Device Manager shows it as "Windows has stopped this device because it has reported problems. (Code 43)" Why does this factory installed option not work correctly in normal use? I would prefer not to have to disable hibernate or have to restart the laptop every time I want to have working WWAN. Thanks for any advice!

Read other answers
RELEVANCY SCORE 70

Hi all, I just began ordering T480s devices as the old T470's are gone, and running into an issue on one where every time the computer goes to sleep it simply states "No Connection" in the cellular section.  Prior to going to sleep it works fine, but after waking this happens every time.  A reboot resolves the issue, but this is incredibly aggrvating. I downloaded the drivers that were released for this WWAN from July 23rd and installed them, but even after doing so Windows is showing the installed driver as a generic device and NOT the drivers I installed(In device manager under wireless it does show as the Fibocom L850 though).  I've tried adjusting power settings, removing the card and putting it back in, uninstalling and trying a fresh install of the drivers: nothing seems to work. Has anyone encountered this or know of a potential solution?  Just about at my wits end here.

A:T480 WWAN L850-GL No Service after hibernation

I have Same problem on x1c gen 6. See x series forum. Do you have this problem only on one device? And others unaffected ? 

Read other 2 answers
RELEVANCY SCORE 69.6

I've a problem with my T480 (non-s) with the Fibocom L830-EB after installing the newest firmware version 18300.1002.00.01.01.17 und driver.  Since this one new firmware, the L830-EB it is unusable for me due to connection dropouts and even due to L830-EB-device-whole-disappear-issues on system driver level, where only a device-disable-and-reenable on the device manager or a reboot helps then in these cases. The longest stable connection i have had since then is about one minute, after which the problems will occur, in other words it is completely unusable now. Please fix it, or alternately provide the old firmware with downgrade-option. My T480 is running with Windows 10 1809 and Arch-Linux (full-encrypted dual-boot).

Read other answers
RELEVANCY SCORE 69.2

I currently have T580 with pre-installed WWAN module (Fibocom L850-GL) and trying to get to work it on Linux. It works perfectly fine on Windows. So far I discovered that Windows driver uses PCIe protocol to communicate with WWAN module, but Linux is supported apparently only through USB protocol, and if PCIe is enabled, the module ignores all USB commands according to its hardware specs document (page 26) - https://www.mev-elektronik.com/files/MEV%20Elektronik%20Service/produkt-downloads/rf-microwave-wirel... Fibocom recommendation is to disable PCIe in BIOS, that is not supported by stock ThinkPad. Thus in Linux the device is only displayed as "Wireless controller: [0d40]: Intel Corporation Device 7360 (rev 01)" through lspci , and nothing on lsusb . Any suggestions how to make it work on Linux? As an alternative I'm considering getting another WWAN module, but it's quite likely it will not work due to whitelists. The only other module that is whitelisted for sure is L830-EB, that does not have global coverage and thus doesn't work in the US or China, even so it was reported that it's Linux-compatible (USB-mode only). Maybe there is a patched BIOS that has whitelists removed? Wondering if there are Linux enthusiasts who are also looking for a way of using WWAN.

Read other answers
RELEVANCY SCORE 68.8

This describes my experience with a T580 (20L9CTO1WW) which has the above Fibocom WWAN adaptor. Everything was fine on Win 10 1809. But after the Win system updater prompted me to update to version 1903 the adaptor is no longer functional. In Device Manager it is no longer listed under Network Adaptors but now appears under System Devices as "Intel XMM7360-P'. That is the internal LTE chipset which suggests the card is still functional but not being correctly recognised by Windows. Yesterday, I spent around 2 hours with escalated Lenovo Tech Support trying to resolve this to no avail. We tried the following:updating to the latest firmware/driver package (https://download.lenovo.com/pccbbs/mobiles/nz3wj21w.exe)uninstalling and reinstalling all driversforcing install of Lenovo driversrolling back to Win 10 1809rolling back to previous firmware/driversphysically removing and reinstalling the card So it seems there is a compatibility issue that will have to be resolved. Hopefully the next iteration of drivers/Windows updates can fix this. In the meantime, I would suggest anyone with a similar hardware setup not accept the 1903 May Update if offered. As Tech Support's final suggestion was to do a completely fresh install of (1809) Win 10 - somewhat undesirable for a lone driver incompatiblity. Alternatively, if anyone has successfully updated, please let me know and consider sharing your driver configuration. Or if anyone has any ideas on how to resol... Read more

Read other answers
RELEVANCY SCORE 57.2

hey, im having problems with plugging in my mouse to any USB port, this just started around an hour ago. ive checked on the brand's website which carried no complaints on problems like this with the same mouse. tried pretty much everything, even looking
it up on youtube and forums... Nothing has worked, worser still, i got it for christmas and its stopped working, ive looked though the device manager too. Please try and help me, if u can. I use Razer Naga Waith Red if that helps

thanks,
onyx

A:Windows has stopped this device because it has reported problems. (Code 43) A request for the USB device descriptor failed.

Hi onyx,
This error means a device driver notified the operating system that the device failed. This circumstance can occur if the device hardware fails or if the device driver fails.
Have you tried to update the device driver for test?
Please follow this guide trying t resolve this issue:
Code 43: Windows has stopped this device because it has reported problems
http://technet.microsoft.com/en-us/library/cc725873(v=ws.10).aspxKaren Hu
TechNet Community Support

Read other 2 answers
RELEVANCY SCORE 57.2

I have Windows 7 Ultimate. Since very recently an unknown device keeps popping up in the device manager every time I start Win. It's reported location is within the front USB root hub but I haven't changed there anything lately. The device status reports "Windows has stopped this device because it has reported problems (Code 43)". I can uninstall/disable it but it will get picked up again the next time I reboot. All other usb devices (mouse, keyboard, web camera, APC UPS, external drive, printer) work fine. How do I get rid of this nuisance so that it doesn't reappear?
 

A:Unknown device: Windows has stopped this device because it has reported problems (Cod

Read other 6 answers
RELEVANCY SCORE 54.8

Dear all, I am facing an issue with my T480. It seems that since 1-2 weeks (since the latest bios upgrade done with Lenovo Vantage I guess, it could be the BIOS Update 10[64] V1.17.1.10) the suspension does not work anymore. What happens is that when I close the display, or when I hit the suspension button on a USB keyboard, the laptop goes to suspension correctly. The power light starts the usual "dimmered on and off". But then if I open the display again, nothing happens. If I press the power button, nothing happens. T restart the machine I had to keep pressed the power button for 10 seconds, and restart with a cold boot. Did anyone had the same issue recently? Regards, Paolo 













Solved!

Go to Solution.

A:T480 suspension stopped working

Note: I have just reverted to version 1.16 (N24ET41W), the previous one, and the suspension started working again as usual. I guess there is something wrong with 1.17... Regards, PJ  

Read other 1 answers
RELEVANCY SCORE 54.4

Hi, I'm using T480 and all of a sudden some of my function keys have stopped working.  This includes F4, F7 and onwards all the way to F12.  Not sure what happened or why but it was working a couple of days ago. Tried updating the drivers and ran windows update as well.  Still no luck.  Seems like a common issue on other ThinkPads too. Any thoughts on how I can fix this for my T480? Best,ZN

Read other answers
RELEVANCY SCORE 53.6

Dear all, I have T480 which used to work fine with ThinkPad Pro Docking Station. About a month ago, after connecting laptop to the dock I could not get it to display video on external monitor. I managed to fix the issue by pulling the power out of dock, waiting for five mins and then putting it back in. It was fine for some time, but today I put my laptop in the dock and it won't display video on external monitor, power trick not working anymore. If i open the lid, while laptop is in dock, screen constantly flickers, laptop making USB connection|disconnection sound, mouse cursor (mouse connected to dock) disapperar and appears - so it does not look healhty. I thought about updating firmware on the dock, ut considering abovementioned sympomts I am afraid that dock does not have stable connection with laptop and updating firmware in this conditions may make things worse. Is there anything else I can try other than throwing dock out of the window? Thanks. 

Read other answers
RELEVANCY SCORE 52.4

Hi, I connected what I suspected to be a faulty USB device to my T480.  The laptop shut down uppon the connection and doesn't restart. It doesn't power on.It doesn't charge (the orange light doesn't turn on). I am surprised there is no kind of voltage protection on USB port. Any idea?

Read other answers
RELEVANCY SCORE 51.6

Hello, My Thunderbolt 3 Port is missing this morning on my TP.  I use it for an eGPU, it has been working great for over a year.  Today not working at went into the Device Manger and the Thunderblot port is not listed under system devices. Suggestions? Thank you,Bob

Read other answers
RELEVANCY SCORE 50.8

Hi All

I am desperately trying to save some very old audio cassettes by transferring them to my computer before it is too late.

I am running Windows 8 on a Lenovo G500.I am using a Behringer UFO202 digital audio interface into which I can connect my analog cassette deck and run directly into the laptop.

The Behringer device shows up in Device Manager and Devices & Printers and is stated to be 'working properly'
However, Every time I click on the device in Control Panel>Sound>Recording I always get a 'Windows Shell Common DLL has stopped working' error message when I try to set the unit up to record.

I am not overly computer savvy but I think this message has something to do with the registry or maybe it is to do with the drivers??

Whatever the case, I am loathe to start messing around in case I make matters worse so I am posting here in the hope that some kind soul will help me out before I tear all my hair out and potentially lose some precious recordings that I am desperate to save.

Just for the record, I would ideally like to record the Behringer unit directly into Sony Soundfourge 9 and salvage/restore accordingly.

Thank you in advance for your time.

A:Recording w/USB Device - Windows DLL Has Stopped Working

As far as I can see, there are drivers for Win 8 64 bit only, Which windows are you using ?

Read other 7 answers
RELEVANCY SCORE 50.8

Hi.. Recently bought HP Notebook 15-ay010nq with AMD Radeon R5 M330 video card. Am instalat driverul de la voi de pe site,dar din pacate nu imi recunoaste placa video.. Am mers la AMD pe site si am incercat sa downloadez driverul si de acolo,dar tot in zadar.. Cand ma uit in device manager imi apare asta.Windows has stopped this device because it has reported problems. (Code 43) Iar la iconita am semnul acela de exclamare..  Pls help me.

Read other answers
RELEVANCY SCORE 50.8

Under display drivers in my device manager, I have two things listed. AMD Radeon 6600M and 6700M Series, and Intel(R) HD Graphics 3000.

The AMD Radeon is the one showing the error code 43. I've scanned for driver updates, it says the driver is up to date. I've tried using AMD's driver updater tool to scan my computer and that, too, says my driver is up to date.

So what's the problem? Is it just because it isn't compatible with Windows 8 (yet)?

Read other answers
RELEVANCY SCORE 50.8

Well I have a MIDI keyboard instrument that was working on my Win7 x64 machine, with proper drivers, and then it just stopped. I get this error message "Windows has stopped this device because it has reported problems. (Code 43)". Oddly it works on an XP machine I tried, while it fails on other Win7 and Vista machines I've tried. Could this device have gotten damaged? If so, is there any way to have it detected in Win7, considering it works in XP still?

If anyone is wondering it's a Yamaha ez-250i keyboard instrument.

Also, I used a 12 foot usb cord. I remember reading something about USB only being designed for 6 feet or so, could this have damaged the device? Thanks.

A:Windows has stopped this device because it has reported problems.

  
Quote: Originally Posted by cephasara


Well I have a MIDI keyboard instrument that was working on my Win7 x64 machine, with proper drivers, and then it just stopped. I get this error message "Windows has stopped this device because it has reported problems. (Code 43)". Oddly it works on an XP machine I tried, while it fails on other Win7 and Vista machines I've tried. Could this device have gotten damaged? If so, is there any way to have it detected in Win7, considering it works in XP still?

If anyone is wondering it's a Yamaha ez-250i keyboard instrument.

Also, I used a 12 foot usb cord. I remember reading something about USB only being designed for 6 feet or so, could this have damaged the device? Thanks.


have you confirmed that the Yamaha is compatible with Vista/win 7? Chances are the USB cord has not damaged the device but may be the reason it is reporting problems.

Read other 4 answers
RELEVANCY SCORE 50.8

Hello,
I recently purchased a gaming mouse and it got shipped yesterday night.
I've been banging my head against the wall trying to figure out how to make my mouse work on my computer.
I keep getting this error whenever I try to plug in the mouse. I's a USB 2.0 mouse.

Windows has stopped this device because it has reported problems. (Code 43).

I've manually tested each and every USB port on my computer and they ARE working fine with other devices. It just don't work specifically with this mouse.
I've installed the drives from the CD supplied with the mouse by the vendor.
I've uninstalled USB port, restarted computer multiple time with little to no success.
The computer meets the specifications of mouse required.

The mouse works fine on my laptop running windows XP on which I can just plug and use it. There's even no need to install drivers manually. So, I'm kind of frustrated and clueless about this. Any help is appreciated.
I'm running Windows 7 Service Pack 1(64 bit). Please let me know if I can provide any other information.

A:Windows has stopped this device because it has reported problems.

... that basically means the driver has failed. Uninstall from the device manager then do a Scan for hardware changes...

Read other 4 answers
RELEVANCY SCORE 50.8

My Yoga 920 experienced a sudden inability to recognize the Lenovo 700 Wireless Laser mouse recently. Since I mostly use the Pen, I didn't notice exactly what set of circumstances may have caused the issue with the mouse. When viewing the USB Devices in Device Manager, I noticed that the Lenovo USB receiver was showing with errors. Uninstalling and reinstalling didn't fix it. I also tried installing a Logitech wireless mouse- same thing, the driver wouldn't install and the mouse wouldn't work. The Lenovo mouse and the Logitech mouse did work on other PCs and laptops in the house. More searching found that the February 13 Windows 10 update is known for breaking USB devices. If this has happened to you, follow the instructions for fixing: https://support.microsoft.com/en-us/help/4091240/usb-devices-may-stop-working-after-installing-the-f... This worked for me, I hope it helps someone. 

Read other answers
RELEVANCY SCORE 50.8

I have Dell Inspiron laptop, purchased at Walmart in January. Windows 7 OS. Was running great. Had Logitech wireless mouse xmtr in 1 USB port, as always. Inserted flash drive in other USB port, and suddenly mouse no longer works, get message:
"Windows has stopped this device because it has reported problems (code 43)."
Tried troubleshooting, does not recognize device. Says I have latest version of software, but still does not recognize device. Have tried new wireless Logitech mouse, same results. Tried connecting camera, which worked fine before, same result. Yes, inserted new batteries in mouse.
Have rebooted several times. Have removed & reinserted devices several times. Same error message. Plug in flash drives in both USB ports & it reads them fine.
Any ideas what happened, or how to fix? Could it be a coincidence that devices stopped working after inserting flash drive?
 

A:Solved: Windows Stopped Device error 43

I just spent time with Dell Live Assist, since my Inspiron 1750 is about 4 weeks old. They could not get my mouse or camera working with the USB ports, either. They are, however, sending me a box to send my computer back to Dell, to have the mother board replaced.
My guess is there is a problem with the USB ports, power supply, maybe?
So, I guess I have answered my own question. Hope this helps anyone else with the same problem.
 

Read other 2 answers
RELEVANCY SCORE 50.8

i have hp mini 210 model laptop and m having problem with my bluetooth and usb .
in device manager there is one unknown device . device status is Windows has stopped this device because it has reported problems. (Code 43). hardware id is USB\UNKNOWN
when i insert pendrive while laptop is on it doesnot respond (any pendrive). but when i restart (keeping the pendrive inserted) laptop reads it. and also bluetooth doesn;t work
please help

A:Windows has stopped this device because it has reported problems. (43)

  
Quote: Originally Posted by amrit das


i have hp mini 210 model laptop and m having problem with my bluetooth and usb .
in device manager there is one unknown device . device status is Windows has stopped this device because it has reported problems. (Code 43). hardware id is USB\UNKNOWN
when i insert pendrive while laptop is on it doesnot respond (any pendrive). but when i restart (keeping the pendrive inserted) laptop reads it. and also bluetooth doesn;t work
please help


Check the information at;

How To Fix Error Code 43 (Windows has stopped this device because it has reported problems)

HTH

Read other 1 answers