Over 1 million tech questions and answers.

Difference Between Wake up on LAN and On Board Wake up on LAN ???

Q: Difference Between Wake up on LAN and On Board Wake up on LAN ???

I have ASUS G72.
Logmein software is able to wake the computer up with On Board Wake up is disabled or enabled in BIOS.

I have also Toshiba L505D.
Logmein software can wake the computer up only if Wake up on LAN is enabled in BIOS.

What is the difference between ASUS BIOS's On Board Wake up option and Toshiba BIOS's Wake up on LAN option?

UPDATE: I found out that ASUS's Option was for diskless boot and using network hard disks as hard disks. Nothing to do with Wake up on LAN.

RELEVANCY SCORE 200
Preferred Solution: Difference Between Wake up on LAN and On Board Wake up on LAN ???

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Difference Between Wake up on LAN and On Board Wake up on LAN ???

One thing that could make a BIG difference here is the fact one is a PC and the other is notebook. The ATX Form Factor standard for PCs calls for the power supply to deliver +5Vsb standby voltage to various parts of the motherboard, to include the front panel power switch, RAM (for hibernate modes), and various devices (keyboard, mouse, NIC) for such "Wake on...". commands.

A notebook, however, does not have this standby voltage because obviously, it would run down the battery if the charger is not plugged in.

Read other 9 answers
RELEVANCY SCORE 97.2

W7 PC wakes up from sleep every few minutes. It didn't use to. I am the builder / owner / sole user. Investigation done so far at the DOS prompt to establish the cause:

powercfg -devicequery wake_armed
(no results returned)

powercfg -waketimers
There are no active wake timers in the system

powercfg -lastwakeWake History Count - 1
Wake History [0]
Wake Source Count - 0Other ideas to try and establish the cause with please?

Many thanks.

Read other answers
RELEVANCY SCORE 83.6

Hi,

I am new here. Hoping someone can help me out with this issue. I work in IT so am not a complete computer bonehead and am at my wits end with this.

My laptop is about 4 years old, it's a toshiba. For whatever reason, it started taking 5+ minutes to wake up from sleeping. If it sleeps for an hour, it's OK.. but if you leave it sleep all night and try to wake it up in the morning, it's quite cranky. After the 5+ minute wake up, it performs as normal. It was running Windows 7 Home 32 bit.

Troubleshooting steps that I have taken are as follows.

Reinstalled windows. Issue was resolved! but after about 2-3 weeks, issue came back. I thought maybe it was some type of windows update, so I reinstalled windows again and paid closer attention to the updates. Issue presented itself again after 2-3 weeks, and there were no updates immediately done prior to it starting.

I started to think maybe it was something related to my hard drive, so i performed laptop surgery and swapped out my original hard drive with a solid slate drive, and installed windows 7 Ultimate 64 bit (this laptop can support 64 bit so I figured why not upgrade.).

issue again was resolved for a few weeks, and now it's back to taking 5+ minutes to wake up again.

If you're turning the laptop on from scratch, it takes 10-15 seconds tops. if you're restarting, it's 10-15 seconds tops (man, I love SSD...)... if you're waking itup within the hour, its 1-2 seconds. But anything longer then that, 5+ minutes.

It ba... Read more

A:Laptop extremely slow to wake up from sleep mode, 5+ minutes to wake

Hi there, have you ran any malware/anti virus scans?

Read other 9 answers
RELEVANCY SCORE 83.6

When my WinXPPro SP3 machine is in sleep/standby/suspend mode (S1 or S3), the fax modem wakes the machine some of the time but not all of the time. I want it to wake the PC every time, with 100% reliability. (When the PC is up and running, the modem and the machine receive faxes beautifully.)

What do you suggest?

Modem: Conexant D850 PCI V.92 Modem with recent driver update to version 7.67.0.50 (7/3/2007) (but this problem is the same now as before with the 2004 driver version)
PC: Dell Optiplex 755
Processor: Intel Core 2 Duo E4600 @ 2400 MHz
RAM: 2GB, of which 1.4GB is usually free
BIOS: A14
OS: WinXPPro SP3 with all updates
AV: Avast Home Free
Anti-spyware: SpywareBlaster Free, Spybot S&D Free and AdAware Anniversary Free
Fax software: MS Fax Console that comes with WinXPPro SP3
Printer/Fax Printer: HP OfficeJet Pro 8500 Wireless AIO (model A909g)
Screensaver: XP logo after 9 minutes; do NOT show welcome screen on resume
Power Settings: Home/Office Desk; Turn Off Monitor after 10 mins; Turn Off Hard Disks Never; System Standby after 20 mins; System Hibernates Never; Do NOT prompt for password when computer resumes from standby
Home network Ethernet connection: Intel(R) 82566DM-2 Gigabit Network Connection card with all Wake on LAN settings ON.
Browser: Firefox latest but use IE occasionally when necessary
Email: MS Outlook Express 6 to POP3/SMTP email service
Misc: I also run LogMeInFree version 4 on all my home computers

Thank... Read more

A:Wake on Ring problem - Fax modem fails to wake PC reliably from standby

I may not be able to help, but I am curious - is this a dedicated telephone line?

If not, what services do you use, like call forward, messaging, call waiting, etc.

Or does the dedicated line have anything like that that you know of? (or didn't know of)

Read other 9 answers
RELEVANCY SCORE 83.2

When my WinXPPro SP3 machine is in sleep/standby/suspend mode (S1 or S3), the fax modem wakes the machine some of the time but not all of the time. I want it to wake the PC every time, with 100% reliability. (When the PC is up and running, the modem and the machine receive faxes beautifully.)

What do you suggest?

Modem: Conexant D850 PCI V.92 Modem with recent driver update to version 7.67.0.50 (7/3/2007) (but this problem is the same now as before with the 2004 driver version)
PC: Dell Optiplex 755
Processor: Intel Core 2 Duo E4600 @ 2400 MHz
RAM: 2GB, of which 1.4GB is usually free
BIOS: A14
OS: WinXPPro SP3 with all updates
AV: Avast Home Free
Anti-spyware: SpywareBlaster Free, Spybot S&D Free and AdAware Anniversary Free
Fax software: MS Fax Console that comes with WinXPPro SP3
Printer/Fax Printer: HP OfficeJet Pro 8500 Wireless AIO (model A909g)
Screensaver: XP logo after 9 minutes; do NOT show welcome screen on resume
Power Settings: Home/Office Desk; Turn Off Monitor after 10 mins; Turn Off Hard Disks Never; System Standby after 20 mins; System Hibernates Never; Do NOT prompt for password when computer resumes from standby
Home network Ethernet connection: Intel® 82566DM-2 Gigabit Network Connection card with all Wake on LAN settings ON.
Browser: Firefox latest but use IE occasionally when necessary
Email: MS Outlook Express 6 to POP3/SMTP email service
Misc: I also run LogMeInFree version 4 on all my home computers

Thanks.

A:Wake on Ring problem - Fax modem fails to wake PC reliably from standby - how to make 100% reliable?

Please see more details (and post your reply) at http://www.bleepingcomputer.com/forums/ind...hl=wake+on+ring(By the way, I'm up to BIOS A16 but does not help.Thanks.

Read other 1 answers
RELEVANCY SCORE 83.2

Hello. I'm looking at this laptop: http://www.dell.com/us/p/inspiron-15-3542-laptop/pd?oc=fncwg2327b&model_id=inspiron-15-3542-laptop

I would like to know if it has wake on LAN and wake on RTC or not.
 

A:Solved: Dell Inspiron 15 3000 Series - Wake on LAN & Wake on RTC?

Since I did not get an answer here, I went ahead and ordered the machine anyway, and took a chance. It does NOT have either feature in it.

It passed my other tests, so I'm keeping it and the next computer I get will probably have both of those features, but for this one, I guess I'll live without, since the network isn't finished to the point where I could actually use it anyway yet.
 

Read other 1 answers
RELEVANCY SCORE 83.2

I have a Dell Optiplex 755 with WinXPPro SP3, 2GB RAM and an Intel Core 2 Duo E4600, and it is unreliable for Wake on LAN and Wake on Ring. I also wonder whether my Standby - Sleep - Suspend (S1 or S3) is working correctly.

When the PC is in Standby - Sleep - Suspend mode (S1 or S3), Wake on LAN and Wake on Ring work some of the time but not all of the time, and I'd like them to be 100% reliable.

These may be two different problems, but your advice will be appreciated. (Also, if I should post in a different forum, please advise.)

My Network Card is an Intel 82566DM-2 Gigabit Network Connection, and I recently upgraded its drivers using "generic" PROXP.exe from the Intel website, although this has not helped the problem. The specific driver file e1e5132.sys is now from 2009 -- it used to be from 2007. But, as I say, Wake on LAN from Standby was not and is still not reliable, both before and after the driver update.

In Settings .. Network Connections ... Local Area Connections ... Properties ... Configure ... Power Management, all the Wake on LAN options are checked ON:

- Wake on Directed Packet
- Wake on Magic Packet
- Wake on Magic Packet from Power Off State
- Wake on Link

The NIC card's Diagnostic checks are all OK.

My fax modem card is a Conexant D850 PCI V.92 Modem, and I have the most recent drivers dated 7/27/07, version 7.67.0.50. In Settings ... Phone and Modem Options ... Modems ... Properties, "Allow this device to bring... Read more

A:Trouble with Wake on Ring, Wake on LAN and Standby - Sleep - Suspend

More to above: Dell has suggested I must re-install Windows. I've never done that, and I realize I'd probably lose all my applications and data - no good. Seems to me that's like using an atomic bomb to kill a mosquito. And why should I assume that will work?

But is there a way to re-install -- or maybe fix -- Windows that leaves everything else safe?

FYI - About a month or so ago, I ran SFC (System File Checker) in repair mode, and that didn't help with this problem.

Any ideas?

Read other 1 answers
RELEVANCY SCORE 83.2

It's not clear to me what 'Wake by Thunderbolt' (hereafter WbT) does and whether or not it's required for 'Wake On LAN' (hereafter WOL).  In the T470s and T480s user guides, there's no mention that WbT is required for WOL so I'm thinking it's not.  But then again, since Ethernet is in the dock itself, and seeing how there are controls for PXE, I could see how it might be required. ReferencesT470s User GuideT480s User Guide

Read other answers
RELEVANCY SCORE 75.2

My PC is fairly new and I'm having problems with slow shutdowns/restarts and slow sleep/wakes. Recently it seems to fail waking altogether and restarts after a while instead. Usually during waking I just have a black screen for a long time before the reset/restart but sometimes I see the Windows log-in screen but it's unresponsive.
The problem predates my CPU undervolting and doesn't seem to change when I switch RAM settings back to Auto instead of XMP (I my RAM necessitates some kind of overclock in order to function at its rated speed).

Can anyone advise how to proceed? Thanks.
System specification below. This forum has a fantastic design that eliminates the form of pasted lists of information. That's just great for preventing people from reading it. I was worried someone might have read this information.
OS: Win 10 Pro 64-bitMainboard: ASUS Z170 Pro GamingCPU: Intel i7 6700 (6th gen), Stock HSF, Undervolt Offset -0.15 V, LLC 4RAM: Corsair LPX Vengeance 2x8GB DDR4-3000 (CMK16GX4M2B3000C15)Graphics: Gigabyte NVIDIA GeForce GTX 950Sys Drive: Samsung Evo 750 SSD, 250 GBData Drives: OCZ Vertex 2 SSD, 60 GB; WDC WD1002FAEX-00Y9A0, ~1 TB; WDC WD2003FZEX-00Z4SA0, ~2 TB; WDC WD2002FAEX-00MJRA0, ~2 TB; RAID 0, ~300 GB [Maxtor 6B160MO x 2]PSU: XFX TS 750W (P1-750S-NLB9)Bluetooth: Parani UD100 Bluetooth USB AdapterMonitor: LG 21.5" W2246S-BF 16:9 Wide LCD Monitor 1920x1080 5msLogitech G500 mouse, K120 keyboard.UEFI BIOS divergence from optimised default settingsAI Overclock Tune... Read more

Read other answers
RELEVANCY SCORE 72

My main system has Windows7 and I have an HP Proliant Microserver with Windows Home Server 2011 (probably irrelvant) and Wake on LAN hardware. The server is "off" right now, but the LAN activity light is blinking, so the LAN card has retained power (for the W-o-L function).

Do I have all I need to wake the server from my desktop, or do I need to install extra software (to send the "magic packet", to wake the server). If I need 3rd party software, then what is recommended?

I've tinkered with WoL during my professional IT career, but never really had much serious use for it, but now I have systems of my own, I'm more interested in getting it working.

A:Wake server with Wake on LAN

It has been a long time since I played with WoL. You might already have what you need to send that "magic packet", but this little 3rd party tool might be easier to use:
WakeMeOnLan - Turn on computers on your network with Wake-on-LAN packet

Read other 3 answers
RELEVANCY SCORE 58

Hi,I'd like to know how to get WoL running on my spectre x360. Realtec usb to lan connector is already configured to wake up on magic packet. Its power management is also configured to wake up my 2in1. The connector is able to to wake up another notebook but not this x360. Windows 10 quick start is switched off as proposed on many internet sites. But wol does not work. And I cannot find a Bios option to switch wol on there. Any idea?

Read other answers
RELEVANCY SCORE 58

I have a 5 computer network with two, soon to be three shared printers. The two are attached via parralel to two computers, and the third will get a print server so I don't need to worry about that one. The main one that things are printed to is attached to a computer that is used spariodically thorugh out the day, and is set to hibernate after 20 min. I would like to be able to have it hibernate as it is but still let people print to that printer without having to physically go over to that computer and wake it up. That computer has a lot of heat problems and I'm sick of talking the cpu out and trying different cooling solutions. What I have one now is working, but it still gets pretty hot. (PIII and idles at 43C ) So anyway... how can I allow users to wake up that computer when they want to print? It stays on 24/7 but hibernates after idling 20 minutes. The computer has wake on LAN enabled in bios and has an ethernet card with the capability.
 

A:Wake on LAN

Read other 6 answers
RELEVANCY SCORE 58

I can NOT get my computer to wake up from sleep/hibernate mode by moving the mouse or hitting the eyeboard. I cant find a setting that allows for on resume.....I have to keep hitting the "reset" button which is really bothering !!!
Anyone can help me in this matter!!

A:Wake me up

Originally Posted by amitsa


I can NOT get my computer to wake up from sleep/hibernate mode by moving the mouse or hitting the eyeboard. I cant find a setting that allows for on resume.....I have to keep hitting the "reset" button which is really bothering !!!
Anyone can help me in this matter!!



Hi amitsa,

Maybe reading this tutorial will help you find a solution.

Power Options and Sleep Mode Problems

Read other 2 answers
RELEVANCY SCORE 58

I run a 24/7 FTP server, but when I'm not around I like to put the pc into hibernation. Is there a way I can get XP Pro to wake up my pc when someone connects to my server?
 

A:How do I get my pc to wake on LAN?

Read other 6 answers
RELEVANCY SCORE 58

Hi,
I'm trying to set up wake on lan on my Vista PC. I've had a bit of success but still need some help. I have a magic packet sniffer set up on the PC to check if it is receiving packets. On my networked laptop I am trying to send magic packets. I'm using a wake on lan program from magicpacket.free.fr

So far I've sent packets using 4 different configurations:
1.
IP address (192.168.100.150)
subnet mask 255.255.255.255
port 9
mac address (xx-xx-xx-xx-xx)

2. IP address (192.168.100.150)
subnet mask 0.0.0.0
port 9
mac address

3. external IP address (66.183.50.30)
subnet mask 255.255.255.255
port 9
mac address

4. external IP address (66.183.30.50)
subnet mask 0.0.0.0
port 9
mac address

All four configuration send magic packets to the Vista PC which show up on the packet sniffer (I have port 9 forwarding to 192.168.100.150). However, only configurations 2 and 4 will actually wake up PC if it is sleeping. I don't understand why that would be case. This is important to me because in the end I want to use my linux NAS to send a magic packet to the Vista PC. However, the program that I have on the NAS for this purpose does not allow me to set the subnet mask. I suspect that it defaults to 255.255.255.255, because the NAS is unable to wake up the Vista PC (but when awake the Vista PC receives the packet just like all of the examples above).

thanks

A:help with wake on lan

My method for WOL with our Vista boxes at work:

Device Manager > Network Controller > Advanced > WakeOnLAN From PowerOFF > Enabled
Device Manager > Network Controller > Power Management > Allow the computer to turn off this device: unchecked
Device Manager > Network Controller > Power Management > Allow this device to wake the computer: checked


When I want to wake one, I simply ping it.

Granted, with this configuration, the occasional broadcast/icmp traffic will wake one up at random... but as long as that's not a big deal for you, the above should work just fine.

Read other 7 answers
RELEVANCY SCORE 58

Hi,

I'm trying to make a little bat-file
which will switch on a PC on my little LAN
from another PC on my little LAN.

Any help would be appreciated,
as i have very little idea how to proceed.

John
 

A:Trying to set up a 'Wake on lan'

Read other 16 answers
RELEVANCY SCORE 58

What is the good free app for WOL?

A:Wake On Lan

have a look here ....

Free Windows Tools from Desktop Central - Remote Task Manager | Wake on LAN | GPO Update | Software Inventory & more

they're the ones I use without issue

Read other 9 answers
RELEVANCY SCORE 58

I have 2 Win7 x86 machines on a LAN. I can wake the desktop (192.168.1.2) from the laptop (192.168.1.3) using mc-wol.exe utility and the appropriate MAC address.
I have also created a batch file that works manually, if I add to the startup folder it works but only when the local user logs on. How do I run the *.bat file during the boot sequence, without logging on? Is this possible in Win7?

Sorted, used Scheduled Task and created a new teask to initiate the batch file during start-up.

A:WOL - Wake on LAN

Shouldnt have to run any batch file... just enable WOL in bios and send the WOL signal to the pc u want to wake up.

Read other 2 answers
RELEVANCY SCORE 58

This is kind of a retro question. I want to turn an old box into a linux server using an old system for a dial-up network. The most retro would be an Abit px5 MB with a 133 Cyrix which still works fine! Second choice is a Gigabyte GA-5AA with an AMD 380. which I still consider a functional back-up system. However since the server must be turned whenever the network is up, so I want to think green and let the server suspend and turn on with a network request. The Abit board in the power management Bios section has a "break event from Suspend: Supportt ACPI RTC alarm function (viaIRQ8). I would love this to mean that If I can get a Lan card to work on IRQ8 (itself a big if) then a lan call would unSuspend the system, fulfilling my need.
The newer GA-5AA board has a Wake on Lan connection and a soft-off jumper. The Power management section of the Bios instruction has a "LAN/Modem Ring on : Enabled Enablee Ring Resume from Soft Off Function" For Soft Off in the Power Button Function "Suspend: Set Power Button Function to Delay 4sec"
Or the default Soft Off.

I must say these were all things I always went right by. For this latter board can I use the settings to get a Lan call to wake up the board And which Soft Off setting would I use?
 

A:What is wake on LAN

Read other 10 answers
RELEVANCY SCORE 58
Q: Wake UP

Hello , My machine does not wake up from sleep mode!!  I have to shut the system down like twice to get it back up. I am currently running windows 10  and did not6 have this problem with windows 7. Thanks. Ad

A:Wake UP

Hi there , Welcome to the HP Support Forums! It is a great place to find the help you need, from other users, HP experts and other support personnel. I understand that your computer is not waking properly from sleep mode. I am happy to help with this. Commonly this is due to some of the settings for Sleep or Hibernate or related to Fast Startup. Please see the following two documents, as they should help with this. HP PCs - Sleep and Hibernate Issues (Windows 10, 8)How to Turn On or Off Fast Startup in Windows 10 - www.tenforums.com Please let me know how that works for you, and if it does resolve your issue, please mark this post as a solution. Kudos would also be appreciated.

Read other 3 answers
RELEVANCY SCORE 58

I need help, and i've searched over the internet and forums in the past few days, no luck. I have a PC with Vista x86 that i use as a file server and run TVersity on it for my uPNP for my xbox on my home network. For years i've always left it on 24 hours a day, but now i moved it downstairs in my closet and i can hear it now, i would like for it to sleep if there is no network activity.

What i want it to do is go to sleep after x minutes and if another pc on my network accesses a file off that share drive or the xbox kicks on via upnp, i want the computer to wake up. Below is what i have set up:

BIOS set to S3, Realtek 8169 NIC shows "allow this device to wake up this computer", but no other Wake on Lan in the advanced settings of the NIC. I read somewhere to disable the mouse and keyboard wake on sleep.

My issue is after i put it to sleep, it wakes up in about 30 seconds. I ran wireshark with nothing running (that i know of) and get ARP broadcast(s) & UDP, i have u-verse and wondering if IGMP snooping and/ or mulitcast is waking up the pc abruptly.

Is there anyway to tell what is waking up the pc from the lan? I checked the event viewer and didnt find anything, it just shows it woke up. I tried a WOL Sniffer, but the program crashed when its launched.

Since i just use this PC for file sharing and sharing media (via uPNP), would it be possible to block all traffic except for "Internal LAN" traffic? and if so, then how can i do i... Read more

A:Wake On LAN

I don't know a whole lot about this, but I can help a little. Is it turning back on after the exact same time period every time? If it's pretty close to the same time interval every time, it's probably some bug in the program rather than someone accessing it.

Download Malwarebytes ( Malwarebytes : Free anti-malware, anti-virus and spyware removal download ) let it update, and run a full scan. That program should pick and malware that may be on your computer causing problems. It's a little unlikely, but best to cover all our bases anyway.

As for only allowing internet LAN, can you just turn off your wireless card on the computer? (I'm assuming that's what you mean; correct me if I'm wrong )

Read other 3 answers
RELEVANCY SCORE 58

Hey guys.

I am having problems staying connected to Live messenger while computer goes to sleep. When I connect to Live messenger, of course, everyone can see me as "online". Then, after 10 mins my computer goes to sleep and now I am offline for everyone. Is there a way to put computer to sleep but still stay online and wake up if someone sends me an instant message?

I use a Linksys Wireless-G USB Adapter. Model: WUSB54GC. And I run Windows Vista Business edition with SP1.

Thanks for any feedback!
 

Read other answers
RELEVANCY SCORE 58

I have two computers on my network. One is a laptop. The other is a desktop with a network card and wake on lan. I would like to wake my desktop up from my laptop. Both have windows xp one has home and one has pro. Pro is on the desktop. I understand a packet has to be sent. How do I do this?
 

A:Wake on Lan

Start with this page, http://www.intel.com/network/connectivity/resources/technologies/wake_on_lan.htm

It will give you an idea of what you need.
 

Read other 3 answers
RELEVANCY SCORE 58

Ok so i did a little searching but i did not find the answer to my question so i thought i would post it here....

I have a dual boot xp/7, when i boot up in xp and shut off the computer i can use wol to to turn on the computer but when i boot up in 7 and shut off the computer i CAN'T use WOL to turn on the computer. I went into device manager>Network adapters>properties>advanced>wakeup capabilites and magic packet is enabled just like on windows xp. I also have the "Allow this device to wake the Computer" checked under power management. So im not sure what the problem is, does anyone have any suggestions? Thanks

A:Wake On lan

no one has any suggestions

Read other 9 answers
RELEVANCY SCORE 58

Hey guys...
I am currently working a on a premaintence project to configure wake on lan that will be on a windows 2k server and also debian server. These boxes do not have integrated nic cards so I am unable to luck out there. I am looking to get nic card that has the 3 pin wake on lan connector. My quistion to you is that will I need any soft ware on the client end to
put on or do i just install the nic card, plug in the 3 ping connector andaway i go? having difficulty googling that specific question.

thanks in advance!
 

A:wake on lan

You need to enable the WOL capability, usually in the BIOS setup. Obviously, your MB also has to support the capability. What make/model is the MB in question?
 

Read other 2 answers
RELEVANCY SCORE 58

Please bear with me as I'm very much new to this. My laptop run on Win 7 and my Desktop (server) runs XP. The network is already setup to work with in the office. My desktop is connected to a modem and my laptop connect wireless to the desktop via the modem. I use my laptop from time to time in the field and than needs to connect to my back end db that is on my desktop (sometimes the desktop is off due to power failure or when it is shutdown I want to start it remotely). I downloaded WOL but do not know how to implement it. Must I install WOL on both computers

Please help me through the steps

A:wake on lan - Win 7 - XP

The link below explains the Wake on Lan process pretty well.
Wake On LAN through your LAN or the Internet

Read other 1 answers
RELEVANCY SCORE 58

I have a laptop at home that I want accessible from the outside using Remote Desktop, but I don't want to leave it on (it is a laptop you know). I was wondering how Wake on Lan works, and if there is a way for me to implement it such that, when I attempt to connect it will automatically turn the machine on?

Thanks
 

A:Wake on Lan

No you can't have it auto wake up upon connection but you can do something like this -

Use http://www.dslreports.com/wakeup to wake up the PC then use RD to connect in once its booted up.

Don't forget to setup your router to forward the UDP port 32767.

Also look to http://www.dslreports.com/faq/wol for more faqs it outlines the whole process.
 

Read other 2 answers
RELEVANCY SCORE 58

some of my computer have wake on lan feature. I really don't have much use for it. But.. How do you wake on lan? What command do you send to wake another computer and from what? I know you need to have it activated in BIOS and turn on settings under network in the controll pannel.

Just curious

Steve L
 

A:How do you wake on lan?

Here's a site that should get you going, works just fine. http://www.matcode.com/wol.htm
 

Read other 1 answers
RELEVANCY SCORE 58

how can I make the computers on my home network turn off and on remotely?

I have 4 computers all with WOL Capable Cards all hardware setup properly

setup as follows

PC1------Switch--------PC2
Pc3-------^ ^--------PC4

please help me
thanks
 

A:WOL (wake up on lan)

Read other 9 answers
RELEVANCY SCORE 58

Hello everyone!I've got x1 carbon 5th and wonder if there are options to wake PC other then WOL -  through WiFi or WWAN?Now i can only wake my PC from sleep or hibernation through ethernet card. But it requires my PC to be wired with ethernet cable. In BIOS i found only WOL settings. But in my WWAN (Sierra EM7455) power management settings there is option "allow this device to wake the computer". I also found via cmd through powercfg command that EM7455 is able to wake PC (but there is no option in BIOS). In turn in WiFi advanced tab there is option "resume with magic pocket", but in power management tab "allow this device to wake the computer" option is greyed out (also no option in BIOS for WOWLAN).So when my PC is in sleep or hibernation only WOL through ethernet card is possible. I think that when PC goes sleep or hibernate only ethernet card is powered and that is one of the causes (BIOS missing options could be also a reason).Am I missing something?Thx in advance for any help.Greetings! 

Read other answers
RELEVANCY SCORE 58

I have an hp laptop and i have it set up to an external display and my laptop is tucked away where opening the lid everytime i want to wake it up from sleep is too troublesome.

I was wondering if there was a way to wake up my laptop from sleep since my usb keeps turning off.

I have checked in my bios settings and i dont think i see anything in there relating to this and i also checked device manager.
In the device manager, i went to usb hub and checked which one powered my mouse and went to power management but the option to wake the computer up from sleep was grayed out and the option for turning power off to this device is still left unchecked.

How can i go about enabling my usb when my computer is in sleep mode?
 

Read other answers
RELEVANCY SCORE 58

hey,

i work in a school as a technician, i have a room full of computers...they all have the same hardware spec, they all are build and setup exactly the same, the settings in the BIOS are exactly the same, the windows XP settings are the same. however, when i send a wake up command only 4 machines in the room will wake up.

any ideas what i could check? one of the main things i noticed was on some of the machines (the ones that wake up) the driver for the network card is not digitally signed..surely that wouldn't make a difference...would it?

regards

SteOasisFan
 

A:Wake On LAN

Read other 7 answers
RELEVANCY SCORE 58

hi, ive got a windows 7 machine connected to a printer,

i want to be able to "wake on lan" this pc from one of my laptops

ive heard its possible, anyone know how??
 

A:wake on LAN

You need to make sure your hardware supports wake on LAN (WOL.) Configuring WOL comes in a couple of parts. First your motherboard has to support the feature. Next, your network card also needs to support WOL. From the motherboard's BIOS, you need to go to the WOL settings and set that part of it up. This ensures that power is still applied to the NIC so it can receive the magic packet which triggers the wake up. Depending on your NIC, you may have to wire in a jumper which connects the NIC to the motherboard via a 2/3 wire cable (I forget which one.) This cable is to provide the trigger voltage to get the motherboard to power up the system. Some NICs can do it via the PCI bus.

Last piece is to get the magic packet utility which crafts the WOL packet and puts it on the wire. The way the utility works is you enter the MAC address of the NIC you want to receive the magic packet.

If you're doing this to wak the PC so you can use the attached printer, you're better off just buying a print server.
 

Read other 3 answers
RELEVANCY SCORE 58
Q: Wake up

Each time I wake my PC (Windows 7), it relist's all my connected hardware, HDD's, jump drives, etc. (shows pane asking what I want to do with the drive).
Is there any way to stop this?
Thanks
Bret

A:Wake up

Hi! N2Abyss, welcome to 7F

Sounds like it is rebooting when it wakes. Can you look into the BIOS when it starts to see if there is a setting there?

Also check the event viewer logs to see if there might be an error associated when this happens.

Read other 5 answers
RELEVANCY SCORE 58

I have not been able to find clear cut instructions for waking up my Vista computer through the network card. I have a Vista Ultmiate x64 desktop that I allow to go to sleep. It is hard wired into a Netgear wireless router. I would like to be able to use my laptop (with a wireless card) to wake-up the desktop so I can use files off of it. I am not thinking through internet at this time. Just through my local network. My desktop is upstairs and I use the laptop downstairs. I have seen things on Magic Packet and etc. but I am unsure of how to set everything up or what I need. Thanks.

Read other answers
RELEVANCY SCORE 58

Hi all,  I'm trying to get this working, if any one else has managed this? I've checked all the options in windows are correct and i've updated all my drivers and BIOS. I've also downloaded the patch from this website which is supposed to enable it, and still nothing.Literally the only thing I haven't done is enable it in the BIOS, because there is no option or advanced settings available. Any help would be greatly appreciated! Wes

Read other answers
RELEVANCY SCORE 58

Hello all, I'm trying to get wake on lan to work with a new PC I have. It is an HP D220 MT. The motherboard has an onboard broadcom NIC. I've downloaded 3 different programs to send the "Magic packet" to wake the computer but no luck so far.

There is a WOL header on the motherboard for me to plug a cable into but since the NIC is onboard I didn't think I'd have to do this, especially since when the computer is powered off the NIC still shows link lights, which tells me the NIC has power, which is supposedly the only reason you normally need to run that cable from the WOL header to a NIC.

Anyone have any ideas?
 

A:Wake on LAN

Look for a jumper on the board, or a setting in the bios... I searched google for references, but all I can find is that it supports WOL and not how to enable it.
 

Read other 1 answers
RELEVANCY SCORE 58

Hi, I got wake-on-LAN working thanks to www.dslreports.com. But I'm buying a wireless card soon, and I was wondering if wake-on-LAN works wirelessly, or needs a physical connection?

Thanks
Elpram
 

A:Wake on lan

Bump
 

Read other 3 answers
RELEVANCY SCORE 58

Hi all,

I just can't get WOL working on a dell vostro 470. 
All tips are welcome  I've done the following:
-set the correct bios settings
-set the correct settings in the device manager
-installed simple TCP/IP services
-updated the bios and the LAN adapter too the latest version
-Used the dell command configure

Any help would be welcome

Read other answers
RELEVANCY SCORE 58

Hi

I have a problem. I use logmein wake up feature on my pc.

However I cannot get the Wake on LAN feature to work. I have enabled it in the BIOS, and enabled it on the adaptor in device manager etc. I currently have my pc programmed in the BIOS to wake up each morning and that works no problem.

I do have another adaptor in the pc and wake on LAN works fine with it for some reason.
Any suggestions?

Thanks

Craig
 

Read other answers
RELEVANCY SCORE 58

Has anyone had success in getting the XPS 15 (9550) to work with wake on lan on either the local network (WOL) or the wide network (WOW).
 
I’m somewhat experienced in WOL/WOW with various computers over the years, but have not been able to do so with the XPS 15.
 
Because the XPS 15 has no built in ethernet port, it requires the use of a USB 3.0 or Thunderbolt ethernet adapter.
 
I am currently using the Anker 3-Port USB 3.0 Gigabit Ethernet Adapter (RTL 8153 chipset + USB Ports VL812 chipset according to online specs). With the Anker adapter, the ethernet works very well. However, I can’t WOL/WOW to work using my time tested procedures.
 
The XPS Bios Power Management Tab has support for Wake on WLAN and USB Wake Support. I configured both to be active. I also configured System Configuration/USB PowerShare as active.
 
I downloaded the latest drivers for the Anker adapter (Dec 2015) and found the expected options for WOL/WOW in the Device Manager/Network Adapers/Realtek USB Gbe Family Controller/Power Management and Advanced tabs.
 
Upon shutting down the XPS, the green indicator light on the Anker adapter also shuts off, which causes me to suspect that there is no power with which to accept the magic packet signal. However, the USB 3.0 hub is powered to some degree, enough to start charging an iphone.
 
If anyone has had any success with wake on lan with the XPS, or has any ideas/recommendations, please advise. 

Read other answers
RELEVANCY SCORE 58

Hi,

I cannot get this to work.

I'm running Windows 10. I have a Realtek PCIe GBE Family Controller Network Adapter, I've checked for driver updates. I've checked all 3 options under it's Power Management and I've ensured "Wake on Magic Packet" and "Wake on pattern match" are enabled.

I cannot find an option anywhere in my Bios to enable WoL.

I've got a Gigabyte 797P-D3 Motherboard.

Please help me.
 

Read other answers
RELEVANCY SCORE 58

Hey guys,

Hope you are all well.

Just a quick question. I'm wanting some software similar to WAKE-ON-LAN, but what I'm wanting is for it to SLEEP/SWITCH OFF machines after a certain time. My company works until 9:00pm on an evening. I'm wanting some software similar to the WOL that can do the opposite - so SLEEP-ON-LAN if you will.

Does any of you know if software such as this exists. And if so where would I be able to get it from?

Thank you,

N.
 

A:Wake-on-lan...

Is there some reason you can't use one of the built in power schemes on each system to either go into standby or hibernate after a set period of inactivity?
 

Read other 3 answers
RELEVANCY SCORE 58

All I am trying to wake on LAN from S5 (complete shutdown state) on some z230 and z440 workstations. I've gone through the BIOS and the network card driver, enabled WOL in the bios, made sure that the power settings on the driver looked good and the device could wake up the computer, and I still cannot seem to wake on LAN. I know that WOL is not blocked on the firewall because I used a WOL utility that ensured that the magic packet was making its way to the destination computer. The magic packet was received on the computers with no issues. Is this maybe a power issue? What do I need to check? Any help would be appreciated, I am really stuck on this one, thanks

Read other answers
RELEVANCY SCORE 58
Q: wake up

I am going nuts trying to fix this problem. When I put my computer to sleep and then click wake up, ninety percent of the time , it will shut my computer down completely. I have to turn off the surge protector and wait five seconds, then turn the surge protector back on and restart my computer. I have tried everything I can think of to fix this. Contacting Microsoft has been useless. My O/S is Windows 7 Ultimate. Thanks for any help. And no it doesn't help to use the space bar for wake up. This was suggested by someone from this site before.

Read other answers
RELEVANCY SCORE 58

Hi, I am having a problem regarding waking up from standby mode, after going to standby I have to press a key to wake up either from my mouse or keyboard...It will switch on and the light will go from blue (on) to orange (standby) about 4-6 times and then it will stay on orange (standby) and I will not get anything on the screen but the fans will keep spinning and have to force shutdown by holding the power button:/ When I restart it will say resuming Windows (I do not go into hybernate mode tho) and take a little time to load me back to the loggin screen.

I have done a little research into this and some people have said it may be my graphics driver (ATI Radeon HD 4650 OC), I have reinstalled Windows yesterday and installed everything except the ATI software I let Windows update install my graphics driver and am still having this problem:/ Performance and info advanced tools are not reporting anything yet.

Does anyone have any soloutions to this, thanks in advance for the help

A:Wake up Help:?

Have u tried to download and install fresh copy of ATI driver from main website? I usually don't use window update to update drivers like graphic or wireless ect...

Read other 3 answers