Over 1 million tech questions and answers.

Can't find "Compaq Presario CQ40-517TU" Drivers :(

Q: Can't find "Compaq Presario CQ40-517TU" Drivers :(

I can't seem to find the system drivers Windows 7 for "Compaq CQ40-517TU" I mean the chipset,audio,video and important drivers. I already look for drivers on HP sites but only HP bundled drivers are available. There is no drivers for system. Need help.

Software & Driver Downloads Compaq Presario CQ40-517TU Notebook PC | HP? Support

Compaq Presario CQ40-500 Notebook PC series*-* Download drivers and software - HP Business Support Center

RELEVANCY SCORE 200
Preferred Solution: Can't find "Compaq Presario CQ40-517TU" Drivers :(

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Can't find "Compaq Presario CQ40-517TU" Drivers :(

Not sure how old this machine is, if no longer supported by manufacturer have you tried looking for vista drivers

I just followed your link and selected vista 32 bit and they are all there

Read other 4 answers
RELEVANCY SCORE 112

Hello, I have a HP Compaq Presario CQ40-314TU Notebook. Currently, Windows Vista is installed on the notebook. I am planning to upgrade the notebook to Windows 7 Professional Edition. However, when I searched for drivers for Windows 7, I did not find any on HP website. I searched as follows: 1. Visited http://support.hp.com/us-en2. Entered Compaq Presario CQ40-314TU Notebook PC in the search box3. Selected Software and Drivers from the left menu4. Clicked Go5. Selected Windows in the Operating system dropdown list6. In the Version dropdown list, I only had two options; Windows Vista (32-bit) and Windows Vista (64-bit). Even selecting one of these options displays:No software or drivers are available for this product with the selected operating system. Please make a different selection, or visit the product homepage. Please tell me the link for installing drivers for this notebook for Windows 7 Professional Edition. Regards,Aziz 

A:HP Compaq Presario CQ40-314TU Drivers for Windows 7

Hi, As you can see, no available link for Windows 7. Please run Windows 7 updates FEW TIMES then post back missing driver(s). Regards.

Read other 1 answers
RELEVANCY SCORE 95.2

Hi,

Ever since I've bought this computer (beginning of 2009) my Compaq Presario CQ40 has been extremely slow. I don't really run much software on it, but it takes around 10-15 minutes to start up all processes.

I run Microsoft Security Essentials and Windows Firewall as security, but it previously had Trend Micro Internet Security in 2009.

I do Disk Cleanups, a full defrag through CMD and a chkdsk /r but it's still painfully slow.

The CPU fan is nearly always running all of the time, and after a quick Google this seems to be a problem in the Presario?

Any help would be greatly appreciated.
Andrew.
 

A:Slow Compaq Presario CQ40

Read other 10 answers
RELEVANCY SCORE 94.4

I'm doing a clean format to Compaq presario c700. It restarts after the "starting windows" appeared while installing windows 7 ultimate. before restarting a black screen and a mouse cursor appears briefly and it will restart...

What will I do to resolve my problem??? and the laptop has no OS, when I boot it normally " ntldr is missing " shows...

hope you'll help me... Thanks in advance...

A:Compaq presario c700 restarts after the "starting windows" appeared

Try a full clean & full format in command prompt.
SSD / HDD : Optimize for Windows Reinstallation

Read other 8 answers
RELEVANCY SCORE 94.4

I have a Compaq Presario Laptop which came with HP Total Care installed. As I felt it was slowing down Computer, I decided to uninstall it. It now does not appear on Programmes or on Control Panel, but I still get notices that HP Total care is active in my computer. How do I completely remove it? Allan.
 

A:Solved: Removal of "HP Total Care" from Compaq Presario Laptop.

Read other 8 answers
RELEVANCY SCORE 94.4

I've a friend's laptop here that is in dire straights.

It is a Compaq Presario V3000 running Windows XP Home edition. Beyond that I don't really have any information to post because I can't even get the thing to boot in Safe Mode.

A regular boot will anchor this thing in a Windows start up loop. It loads Windows then the blue sceen flashes with an error message and is too quick for me to read what it says .. then it starts back to loading Windows .. insert vicious circle here.

A safe mode boot will get me to the "Windows is starting up" screen, but no further. It sticks there.

Anyone have a suggestion?

A:Compaq Presario V3000 - Win XP Home - can't even boot up in "Safe Mode"

I went in and disabled the "auto restart" function and have nailed down the BSOD error message.

STOP: c000021a {Fatal System Error}
The Windows Logon Process system process terminated unexpectedly with a status of 0xc0000005 (0x00000000 0x00000000).
The system has been shut down.

Maybe this will help pinpoint the problem?

Read other 2 answers
RELEVANCY SCORE 94.4

Compaq Presario 700US Keyboard "missing" keys (PN: 254114-001)

Hi,

Short version: Some keys (Lower case), same and other keys (upper case) no longer work. Dos, Bios or WIndows same results.

My question is this: When the notebook keyboard fails, will replacing the key board generally solve the problem?

Or is the problem possibly tied to ASCII decoder chip function (internal to motherboard)?

Long Version:
Historically, last year I spilled about 4 ounces of Red Wine into the "pass through" keyboard (passes through keyboard to internals). I managed to rinse out most of it after getting pointers to the IPB for the Presario. The only residual problem was a hesitant "space" bar key.

Recently, while entertaining a young grandchild, I managed to spill about 1/2 ounce of coffee (cream and sugar) into the keyboard. I whipped that baby apart, rinsed out the keyboard with distilled water. However, after everything dried out, I noticed new failures of keys, but in a pattern (or sorts).

The B and N keys (Uc & Lc) both fail. Also the "return" (cr) key. Also 3rd from left of the B "shift" C and 3rd from right of N, "Shift" <. Also the 2,3,4, and 5 key. Left Shift key is also non-functional. "Arrow up and Arrow down" also fail.

Most of the other keys work just fine.

The logic of this "pattern" may be simply mechanical or some hierarcy of 2 as defined in the ascii tables (or don't they use th... Read more

A:Compaq Presario 700US Keyboard "missing" keys

Followup: Good news Bought good-used keyboard off eBay for $25.00 and it now works just fine!!

Bob
 

Read other 3 answers
RELEVANCY SCORE 94.4

Got a problem with a compaq presario CQ56, in that whenever I log on to my main profile, it will start normally, and the desktop and icons will appear for a second, after which all the icons disappear and a few seconds later, so does the background, leaving me with a blank white screen. All the programs seem to work fine though, just "underneath" the white screen, as when I ctrl+alt+del, it returns to how it should be untilI perform an action

So far I've tried restarts, full shutdowns, emergency shutdowns(battery removal), switching users back and forth just about everything from taking it apart, which I don't think needs to be done

Any and all help would be appreciated
 

A:White "cover" on screen (compaq presario cq56)

If you can, try hooking the laptop to a computer monitor (should have a video input jack on the side somewhere) and booting the computer, then hitting FN until you get a picture on the monitor.

EDIT: I missed a few elements of the original post, sorry
 

Read other 2 answers
RELEVANCY SCORE 94.4

HI  so i got this laptop that does not boot and does not even turn the screen led on... the power lights are onn plus i noticed the caps lock and the num lock lights keep flashing at the same time every 3 or 4 sec... before this it was working fine i remember the last time i use it the screen turns black... because the battery was low... then when i went home and connect my charger... nothing seem to show up... the things that I tried is rreplacing the ram modules, unplug battery and the power adapter then just connect the power adapter without the battery but still nothing.. plus i already tried connecting to a external monitor, a projector and also a tv with hdmi cables, still nothing.. i tried spamming the f9 f10 f2 but nothing shows... I am seriously worried now because all my documents are in the laptop... any suggestions? 

Read other answers
RELEVANCY SCORE 94.4

Hi! My computer is Compaq Presario CQ40. It's 8 years old and can only be used when directly plugged in to the electric socket. It's been working fine until last night when it suddenly shut off. At first I thought that maybe the plug was accidentally pulled out from the source but when I tried to plug it in again, the light indicator beside the power supply in the unit itself won't turn on. I tried to unplug and plug the charger adapter but nothing happened. May I know what could have possibly happened? Is there a way for me to check the possibile problem? I know that my laptop is very old, but I still find it very useful and I wish to continue to use it in the future. Hope to hear from you soon.Thank you!

A:Unexpected shutting off - Compaq Presario CQ40

If you are lucky the AC adapter has just died. To understand more, no light comes on the adapter brick when you plug it in the wall and no light comes on next to the AC jack when you plug into the laptop? Where do you live? On an 8 year old laptop you can find a useable "3rd party" charger for a few dollars.  

Read other 1 answers
RELEVANCY SCORE 94.4

Hi Everyone,  please inform me the driver motherboard for Compaq Presario CQ40-530TU Notebook PC which is compatible with Windows 7 - 32 bit. In HP Website, I only found the driver for Windows Vista (32-64 bit). I really need your help all. 

A:Compaq Presario CQ40-530TU Notebook PC

 I think most, if not all, of the Vista drivers will work on Windows 7. Actually, when I upgraded a Vista laptop some years ago most of the drivers were included in Windows 7 so you may not need all. Seems like I only needed graphics and wireless driver. How does your Device Manager look?

Read other 1 answers
RELEVANCY SCORE 93.2

I won a Compaq Presario CQ40 series laptop. But got forgot bios password.

A:Compaq Presario CQ40 series bios password

madarya137 wrote:I won a Compaq Presario CQ40 series laptop. But got forgot bios password.What luck .. If you do not give a code by placing your 3 times one randomly, this time do not open so lucky, you have to contact HP. Regards.

Read other 2 answers
RELEVANCY SCORE 93.2

Hello everyone.

Pardon me if my problem sounds little funny.
I have Compaq Presario CQ40, windows 7 laptop.3GB RAM,320 GB Hard Disk.
Since past few days i m facing this problem, whenever i put on my laptop, and when the desktop opens, my laptop hangs in another 1 or 2 minutes. i have tried this around 5-6 times and still there isn't any improvement. i have also tried to set my computer to an earlier restore point, and have done this twice, still no improvement.

Shall i run recovery, i m afraid of data loss.

Can any 1 guide me what could be the cause, and what could be the solution.

A:My Compaq Presario CQ40, windows 7, hangs in 2 minutes.

Download VEW (eventviewer) by Vino Rosso http://images.malwareremoval.com/vino/VEW.exe
and save it to your desktop

Double click it to start it Note: If running Windows Vista or Windows 7 you will need to right click the file and select Run as administrator and click Continue or Allow at the User Account Control Prompt.

Click the check boxes next to Application and System located under Select log to query on the upper left

Under Select type to list on the right click the boxes next to Error and Warning Note: If running Windows Vista or Windows 7 also click the box next to Critical (not XP).

Under Number or date of events select Number of events and type 20 in the box next to 1 to 20 and click Run

Once it finishes it will display a log file in notepad
Please copy and paste its entire contents into your next reply

Read other 2 answers
RELEVANCY SCORE 93.2

Hi,
I'm trying to repair/reformat a laptop. It's a Compaq laptop, Presario CQ40. It originally had Windows XP but started giving a blue screen. I can't get anything to work now. Windows won't boot, all it gives is a registry error (software/hive). When I try to boot from the Windows XP disc, it starts the XP boot load, but right before it gets to XP Recovery Repair screen, it gives another blue screen. It says "Windows has been shut down to prevent damage to your computer. STOP: 0x0000007B (0xF7C1E524, 0xC0000034, 0x00000000, 0x00000000). I don't know what to try. Several internet searches have suggested turning the SATA to Legacy in the BIOS, but I have nothing in the BIOS that relates to SATA. I'm stuck. Please help!
 

A:Compaq Presario CQ40 laptop won't repair or run XP install

Blue screens can be caused y a couple of failing devices; HDD and RAM are most common. Substituting system components with good ones is a cheap way to solve problems like this. It's easiest to start with the system ram and you can easily eliminate the faulty component that way.
 

Read other 1 answers
RELEVANCY SCORE 93.2

compaq presario CQ40 on "enter administrator password or power on password "is detected . How can i reset it .Please help me .

A:compaq presario CQ40 on "enter administrator password or pow...

Hi, At the password screen, hit enter 3 times and you should receive a 'halt code' - post back with this code. Regards, DP-K

Read other 5 answers
RELEVANCY SCORE 93.2

when i play farmville (facebk) i noticed that my laptop is slow. while my ram is 3gb already, dual core and im running vista business. do u think it has s/thing to do with vista??

A:Compaq Presario CQ40-310AU running Vista

My wife plays Farmville on my XP laptop that has just 1GB of RAM and an older Athlon64 CPU and it runs great.

Vista = resource hog.

Read other 8 answers
RELEVANCY SCORE 92.4

hello there,.. please help!

i have Compaq Presario CQ40-717TU Notebook PC,
the problem is


my netbook support for windows vista, but i want to downgrade it to windows xp, because some school work still using windows xp. I've been surfing everywhere.

I can a lot of tutorials some of which is flash the bios. update bios with its high risk.
As for some of them give a tutorial to make your own xp sata, using "nlite" and I became confused when I have to find a suitable driver for ahci [CQ40-717TU].

to the seniors and professors. please guide
where I have to download the ahci driver?

how do I update my bios (I still lay the problem update / flash bios).


thanks before...

A:Install Windows XP on Notebook Compaq Presario CQ40 717TU

First check for all the Win XP drivers for your hardware.
You can check your HP/compaq PC here:
General XP Downgrade Guide for HP Laptops - HP Support Forum
NOTE: Please read this thread fully.


If your Win XP CD, does not support your Sata Controller, you will need to load drivers to uses at F6.
Load Sata Controller drivers with a floppy disk is the best way.
SATA Drivers - Load in Windows XP Setup on Dual Boot
OR
SATA Drivers - Slipstream into Windows XP CD

Read other 4 answers
RELEVANCY SCORE 92.4

Compaq Presario CQ40 Notebook PC VJ985PA#ABG 515AX? I have installed Windows 8 - but now cannot use func F4 to switch to external monitor. I get "Your PC can't project to another screen, Try reinstalling the driver or using a different video card." How do I do this? When I look in device manager it has Microsoft Basic Display Adapter.   

A:Compaq Presario CQ40-515AX Windows 8 & external monitor - on...

Try this driver: http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_125341_1 You have Radeon HD3450 video. 

Read other 1 answers
RELEVANCY SCORE 90.4

Hi. I was wondering where I could find ethernet drivers for Compaq Presario SR5019SC. HP drivers site only lists a LAN driver update which is cool but the original drivers would be nice. I'm running Windows Vista 32bit operating system.

A:Where do I find Compaq Presario SR5019SC ethernet drivers

Hi, Pleae try    http://www.realtek.cz/realtek-download.php?realtek=rtl8101e&system=3 Regards.

Read other 2 answers
RELEVANCY SCORE 90.4

i reformated a friend pc... when i start up pc needs to find drivers for unknown device.. go to device manager and its listed under other drivers - unknown device.. ive been to the compaq site and dowloaded all drivers but nothing seems to work... any ideas.....how can i find what the device is...ect.... thanks for your help

ps.. there are no cd's with drivers that came with his pc...
 

A:compaq presario sr1834nx cant find drivers for hardware

Hi, try this

http://www.instantfundas.com/2008/06/how-to-find-drivers-for-unknown-devices.html

Bill
 

Read other 1 answers
RELEVANCY SCORE 89.6

Hello! Hopefully this post will go thru - I lost my first one!

Please excuse this post. I just want to make sure I have the correct drivers for my laptop before anything is destroyed. I presume that if I don't install the correct drivers, then my laptop will be toast? Please correct me if I'm wrong, and I'll follow your instructions Bill!

In looking at the following post in this thread, and going to the first link for chipsets (about a third of the way down on the 1st page):

http://www.techsupportforum.com/f19/...ed-217129.html


The nvidia site talks about Nforce 630i/610i - GeForce 7150...

However, in looking at the info displayed from a cool program in my opinion - (PC Wizard 2008, that tells a person a LOT about their computer), it shows my system to have the nVidia nForce 560 chipset, with the Quanta 30EA motherboard.


Will the 630i drivers work for/with the 560's???


I haven't looked up the other links yet from that post, but I presume I will have the same questions, unless you Bill, tells me that putting in wrong drivers won't toast my laptop, in which case, I'll follow the directions.

Please advise, and sorry to be over-cautious :)

Thank you in advance!

Regards,
Paul

A:Part 2 - "Solved" XP drivers for Presario F750US notepad

I wouldn't test it, just use the driver that correlates to the hardware. That way you are better off because you won't have compatibility issues later down the line.

Read other 1 answers
RELEVANCY SCORE 86.8

I want to change my OS into Windows 7.I need the drivers of my notebook.Where i can find the drivers??.(I need all the drivers to get the best performance)

Thranks,my english is very bad

A:Drivers For Compaq CQ40-505LA

Just select 32 bit or 64 bit 7. Fabe http://h10025.www1.hp.com/ewfrf/wc/s...roduct=3966049&#

Read other 4 answers
RELEVANCY SCORE 84.8

I just bought a laptop yesterday, Compaq Presario CQ40-340TU. It came with Windows Vista Starter OS. Because of the limitations with networking, I need to install Windows XP on this laptop now. I have my own installer of Windows XP and can't afford to purchase a different version of Windows Vista so that's not an option for me.

I really hope someone can help me find drivers for Windows XP for the following. I'm not even sure if they're the right specifications for my laptop model but I found them on a site selling the same model and from the HP product information page.

I already have nLite and I'm ready to integrate SATA drivers with my WinXP installer but I don't know which drivers to include. Please, help me!

Technical Specifications
Processor Intel® Pentium Dual Core T4200 (2.00GHz, 800MHz FSB, 1MB L2)
Chipset Mobile Intel GL40 express chipset
Operating System Free DOS
Graphics Intel GMA 4500 Graphics
Video Memory up to 1759 MB of Intel DVMT 5.0 (64 MB of Dedicated Memory, up to 1695 MB of Shared Memory )
Display Panel 14.1-inch WXGA High-Definition** Widescreen Display
Memory 1GB DDR2 800Mhz
Memory Slots 2 slots
Hard Drive 250GB SATA
Optical Drive Super Multi 8X DVD±RW with Double Layer Support
Networking/Wireless High speed 56K modem, integrated 10/100 LAN, 802.11 a/b/g WLAN, Bluetooth
Media card Integrated 5-in-1 digital memory reader slot (xD, SD, MMC, Memory Stick and Memory Stick PRO)
I/O Ports Built-in webcam, RJ-45, headphone, mi... Read more

A:Downgrading from Vista to XP - Need drivers for Compaq CQ40-340TU

I've already found the WinXP drivers for the graphics adapter and ethernet/NIC.
Basing it on the list of drivers available online for this laptop, the most important driver I need is for the chipset.
Also, for the SATA drivers that I should integrate in my WinXP installer, that I still need to find.
I don't know where to find them. I hope someone here can help me, pretty please.
 

Read other 1 answers
RELEVANCY SCORE 82.8

I have a Toshiba Satellite A205-S7442 laptop which came with Vista and I upgraded to win 7 dual boot. For some reason there are no drivers for the card reader ( sandisk microSD card ) in win 7 but Vista works fine. Have tried Toshiba driver download but cannot find drivers for mass storage controller.

Any suggestions on how to find drivers, tried update drivers no luck.

Thanks Bob

A:Cannot find "Mass storage controller" drivers for win 7 dual boot.

Link to driver for anybody that needs it.
TI Card Reader Driver for Windows XP/Vista/7 (32/64)

Bob

Read other 2 answers
RELEVANCY SCORE 82.8

Hi!! I've found another interesting bug fix!! I'm surprised i found no other useful material on this error on the internet, when it seems to be a fairly common and annoying error, but here goes:

C:\ProgramData\Microsoft\Windows\WER\ReportQueue\Report[any random number here]

In order to recognise which tmp file you should look into, you need to know the CATALOGUE number of the driver you wish to install.

[Guide to finding out the catalogue no.:
Inside of the place where you have your driver setup files (cd, floppy, wherever), locate the .cat file. It should have an icon with several sheets of paper bound with a strip of tape. Windows uses the catalogue file name as the tmp file name. So search through the folders in the above mentioned directory until you find the one with a tmp file by the name of the catalogue file you’ve located in the steps above]

In here you should find a .tmp file. There will be about 4 files, give or take. Open the .tmp file.

This is the file that will give the REAL solution to your problem:

In this file, windows logs its actions while installing the drivers.

Now here's the magic: Windows cannot find the file specified? Cos Either Windows or your Conexant driver witers is stupid. Either way, if you scroll down to the bottom of this file, and read the last 20 lines or so, you'll realize that windows was actually looking for the file that was missing in a valid folder, but the files weren’t there.

In my case, the folder was:... Read more

Read other answers
RELEVANCY SCORE 82.8

Hello guys, It's me again and I really need help. I've been searching for hours looking for NEO M1110 notebook win7 drivers and I can't seem to find one. I also even tried to look for NEO website for drivers and no luck at all. I would gladly appreciate if you could help me on this matter to help me find the exact win7 drivers for this laptop. Thanks.

A:I can't find "NEO M1110 notebook" Windows 7 32bit Drivers

Hi tech27, Have a look here NEO Manufacturing and Services, Inc. - Laptop, Notebook, Netbook go to the driver downloads page and select your model #

Read other 3 answers
RELEVANCY SCORE 82.4

hey this computer got slow last year somehow when I made a new computer account then deleted it. I started googling stuff to find out why its slow, and I downloaded "process explorer" and found out that "interrupts hardware interrupts and DPCs" use alot of cpu. So I found out its got to do with driver problems, so I used "driverfinder" and "driverfetch" and it had out-of-date drivers. I tried to google them and download but cant find anything. I downloaded "ATI Radeon HD3200 Graphics", and I went to the "broadcom Netlink (TM) Gigabit Eternet" website an downloaded it but it didnt update it. I went to the driver in driver manager too and tried to update but didnt work. These are drivers I cant find: standad ahci 1.0 serial ata controller, ATI I/O Communications Processor SMBus Controller, and USB Mass storage device.


here are my computer information if it somehow is needed:
windows 7 hom premium 64bit

A:help drivers out-of-date high "interrupts" cpu (where to find)

now its changed: windows 7 ultimate 32-bit

Read other 9 answers
RELEVANCY SCORE 82

i want make a dvd disk for my compaq recovery, but it always shows "this is not a blank disk, please insert a blank dvd?". wut should i do to get a recovery dvd? (i have updated my drive, but nothing useful. i have tested my burner with nero, it works fine.)
 

A:"compaq Recovery Cd/dvd Creator"!!! why it always shows "this is not a blank disk"?

plz help!!!
 

Read other 1 answers
RELEVANCY SCORE 79.2

This is a resurection of an old unresolved Vista Post, and it also happens in Windows 7.
====================================
Original subject - Start Menu - program search issue
I use Windows Mail for my daily email tasks, and would like to be able to
open the program by using the vista search bar built into the start menu. The
problem is, when i search for "mai" it brings up Windows Mail, and I can hit
enter and load the program. However, when I search for "mail", it returns:
"No items match your search." I have it set to index both the start menu and
my programs directory, and have even tried to rebuild the index.

It seems kind of strange that Vista would recognize that when I type "mai" I
want my mail programs, but when I actually type "mail", it gets confused...
and this in turn has -me- confused.
====================================
and
====================================
Oh thank goodness, I've finally found someone else with the same problem.
The word I have issues with is "photo" ("phot" works great, but no results
for "photo"). Not a show-stopper, but WHY!?
====================================

I've noticed the same thing with Windows Desktop Search in Windows 7. After some experimenting I think I have the reason why, but not a fix.

It seems to em that mail and photo are probably used as "kind =" prefixes in Windows search, and even if you enter photo with out ... Read more

Read other answers
RELEVANCY SCORE 79.2

Dear Experts,

I have created windows image on Drive F: but delete it after some time manually due to some space prob.
But while backup shows about 40 GB only few GB space got free after deletion. When i try to again take the the backup using windows 7 backup & restore option, its still shows 35 Gb of System Image in drive F: when i brows the Manage Disc Space option but i cant find it on the same drive. (Plz see attached pic)
Plz help me to locate this and delete the same.

Thanks

A:Cant find "System Image" of 36 GB but its shows on "Manage Disc Space"

Hello sattyaji, and welcome to Seven Forums.

It may still be showing if the system image was created as part of a Windows backup. Using the tutorial below to reset Windows Backup should clear it for you, but you will need to set up your backup again afterwards.

Backup User and System Files - Reset to Default Configuration

Hope this helps,
Shawn

Read other 5 answers
RELEVANCY SCORE 79.2

Need the aforementioned drivers.  I have installed virtually every driver available in the Driver download page inc Control Vault and cannot get the two driver mentioned.

Any help would be appriciated 

A:Need drivers for Dell Latitude E6520 "Broadcom USH" & "Mass Storage Controller" Windows 7 64 Bit

Check under Security for the Broadcom Unified Security Hub (USH - probably a print/biometric reader) for the device that best matches your hardware:
www.dell.com/.../latitude-e6520
The other "mass storage controller" ... go to Device Manager, right-click the device in question, Properties, Details tab, change dropdown to Hardware Ids and give me the the VEN and DEV ID's (do the same for the above USH device if the driver linked does not work).  

Read other 13 answers
RELEVANCY SCORE 78.4

Browser (IE7) will frequently redirect to a page with a message "Sorry we couldn't find "http://www.atdmt.com..." or "http://ad.doubleclick.com" or other various tags (though these are most common).

Web pages will often not load at all or will redirect while reading a webpage without any user action.

Occasionally it will simply say unable to load "actual web page trying to visit". Also oddly - problem seems to occur much more frequently in the morning than evening. This makes me wonder if it is a internet provider issue.

Problem has been occuring over the last 2-3 weeks.

I have followed the 5 Step process to the letter and run DSS after the first four steps. The contents of file main.txt are listed below and extra.txt is attached as a separate file.

Very much appreciated in advance for your help when you get a chance to review this.

Main.txt
---
Deckard's System Scanner v20071014.68
Run by SJL on 2008-01-30 17:09:02
Computer is in Normal Mode.
--------------------------------------------------------------------------------

-- System Restore --------------------------------------------------------------



-- Last 5 Restore Point(s) --
83: 2008-01-30 22:03:16 UTC - RP661 - Deckard's System Scanner Restore Point
82: 2008-01-30 20:21:50 UTC - RP660 - System Checkpoint
81: 2008-01-29 18:59:32 UTC - RP659 - System Checkpoint
80: 2008-01-28 18:34:48 UTC - RP658 - Installed Microsoft Office Live Meeting 2007
79... Read more

Read other answers
RELEVANCY SCORE 78.4

Hello

I have these 2 unwanted icons on my desktop, "Click to find & Fix errors" and " Sportsbook Football". I don't what type of programs they are but they downloaded themselves without my authorisation and I can't get rid of it.

I have run Ad-Aware, Spybot, The Cleaner (trial version), AVG anti spyware, Webroot (trial version),Windows Defender.

I think it was Webroot Spy Sweeper or The Cleaner that removed "Click to find & Fix errors" but it kept coming back.



Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 3:28:08 PM, on 5/22/2008
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16640)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Lavasoft\Ad-Aware 2007\aawservice.exe
C:\WINDOWS\Explorer.EXE
C:\PROGRA~1\Grisoft\AVG7\avgcc.exe
C:\Program Files\Java\jre1.6.0_06\bin\jusched.exe
C:\Program Files\Apoint\Apoint.exe
C:\Program Files\Windows Defender\MSASCui.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Apoint\HidFind.exe
C:\Program Files\Apoint\Apntex.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\Grisoft\AVG Anti-Spyware ... Read more

A:Help remove "Click to find & fix errors" and "Sportsbook Football"

Hello
Can anyone help please?

Thanks

Read other 19 answers
RELEVANCY SCORE 78.4

I'm not sure what this is in Windows Update [and this seems to be greyed out itself too], but how is it possible to have no results in Google on this KB that's in Windows Update?

I also clicked on the "more information" for the Microsoft Knowledge Base, but nothing came up there either.

A:A "non-existent" Windows update ("KB3024777") even Google can't find

Also note that it can't be unchecked/deselected.

Edit: It seems this update removes kb3004394 and vanish without a trace (except in History).
Neither seems to be available in the uninstall list afterwards.

Read other 9 answers
RELEVANCY SCORE 77.6

Okay, I have an ATI Radeon 8500 on my Windows XP system, and one day, after my dad had used the computer, the 3D video driver stoppeed working. He can't recall doing anything. So it goes. I think "whatever", downloaded the latest Catalyst drivers, and try to install it, only to get the message "INF Error, Video Driver Not Found" and then "Try to set up your adapter with a standard VGA driver before running setup". I tried googling for info (apparently it's a common-ish issue), but I never found anything that worked. I tried uninstalling anything ATI and then installing, to no avail. I tried uninstalling the error-listed VGA adapter from the Device Manager and then running install which didn't work. Rebooting after that also didn't work (it popped up with "New hardware found" after the reboot, but it couldn't find the proper drivers).

After an unedifying series of adventures I got to http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=45&kind=1 which has several drivers for my mobo. I first downloaded (obviously) the VGA driver, and tried to run setup. Unfortunately, after preparing the install, an Error message pops up saying "The system cannot detect the device, please confirm that the device is configured properly and restart the setup program." I then tried downloading the AGP upgrade, installed it, but nothing changed. I also downloaded the BIOS update, since it mention... Read more

A:"INF Error", VGA Driver "Missing" Installing ATI Catalyst Drivers

the radeon is not integrated with your motherboard, and the onboard video has probably been disabled in the BIOS. to install the appropriate drivers for an ATI radeon 8500 card you need to download and install the drivers from ati's website. from there you can download the latest version of catalyst and install that.
 

Read other 13 answers
RELEVANCY SCORE 77.2

I want to have my folders such as My Documents, Downloads, etc stored on a separate data partition to the OS, like many people do.  When you go to the properties of the (original) folder and click on the Location tab, what is the difference between
using the Move button and the Find Target button?  Is one recommended to achieve this over the other?
I haven't seemed to find the answer after some time searching, and didn't want to do anything irreversible.
Thanks.

A:"Move" Username/folders or "Find Target..."

Matt
 
It’s perfectly safe to use ‘Move’ to move the Documents folder to a different location. Navigate to the folder, then right-click it > Properties
> Location Tab > Move, select a Destination and follow the prompts. The location can be restored by choosing Restore Default.

Read other 2 answers
RELEVANCY SCORE 77.2

I downloaded a Weather program, and my Antivirus program found a Trojan in the program.
It got rid of the virus, but now every time I boot or reboot I get a message "C:\WINDOWS cannot find "weathersetup.exe" ". I have tried everything I could think of, but cannot get rid of the system trying to load this.
Any help would be appreciated.
 

A:Solved: "Startup" problem (cannot find "Weathersetup.exe").

Read other 16 answers
RELEVANCY SCORE 76.4

In Windows XP, fully updated, I have several folders full of mp3's and want to see the bit rate and duration. I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

But all the figures in the "Duration" column appear to be in "hours" and "minutes", so I see "00:04" or "00:03", but what I want is "minutes" and "seconds".

Any thoughts as to how to change this?
 

A:Solved: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

Read other 16 answers
RELEVANCY SCORE 76.4

Ok, now I get another problem... When I click "install now", I get a msg box that is saying 'no device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK'

What should I do now?

A:When I click "install now", it's saying "No device drivers were found"

Is the HD showing in BIOS?

Can you post your specs.
Filling out System Specs
Dont Know What Hardware You Have..??
VistaForums SysInfo Tool - Vista Forums

Read other 9 answers
RELEVANCY SCORE 76.4

The following was displayed in 'Automatic Repair' on startup:

"The operating system couldn't be loaded because a critical system driver is missing or contains errors"
"amdkmafd.sys" "0xc000007b"

I had installed the new windows 10 anniversary update (1607) and after finally sorting out everything to my liking I decided to boot up Radeon Settings to see if there was an update for the driver from AMD.

I was greeted with a message saying that the AMD driver was either missing or wasn't working properly and that I should go to AMD to download and install the correct driver.

Obviously confused as to why it would be missing or had errors I continued to download AMD's auto driver detect tool and ran it.

In the 'checkbox' stage of AMD's auto detect tool I saw that under all the items was a message saying that no version of that item was installed which I found rather weird that the drivers don't exist and the culprit initially points to the windows update I just completed.

I continued with the install and it was at that point when I experienced the BSOD.
The computer didn't restart after the BSOD so after some waiting I restarted it manually.

It then booted into Automatic Repair and the obvious route after the computer won't start due to the missing or corrupted system driver would be to use a recovery disk or USB.
Sadly I have neither.
(I have restore points but obviously can't get to them)

(I can't use the BSOD dump analysing... Read more

Read other answers
RELEVANCY SCORE 75.2

I am running Windows XP SP3, fully updated, on an Acer lap top PC.

I have several folders full of .mp3's and want to see the bit rate and duration. To do this I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

The two new columns appear, but the format of the "Duration" column appears to be "hours:minutes", so I see "00:04" or "00:03" for most .mp3's, when what I want to see is 'hours:minutes:seconds", e.g. "00:03:45".

This also happens for video files (.avi files), e.g. all my episodes of "Heroes" (sad, I know) have a duration of "00:42" instead of "00:42:xx".


Here are two pictures showing the problem with the .mp3's. The first is of Explorer showing the Duration as "Hours:Minutes":




The second picture is of the properties window of the first .mp3 in the list above:




I copied some .mp3 files to another (old) PC on my home network, and it displayed the duration field correctly:




Also, the properties window correctly shows the duration also:





I'm not the only person to have this problem. I received a private message from a member of another forum where I posted about this problem several weeks ago. That person also has the same problem with the duration field.

The tech guys on that forum were unable to find the source... Read more

A:Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

* bump *

Tricky, this one!

Read other 8 answers
RELEVANCY SCORE 75.2

I have had this problem numerous times in the past where the installation proceeds then ends with the messages:

During the installation of the device.
The system cannot find the file specified
and it goes into a detection loop

HERE is the solution:

Windows 2000/XP has a bug that it cannot properly detect new hardware by *.inf files, if the RunOnce registry key is missing for the following location:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion

This key is often used by installers to execute post-reboot programs, but sometimes they accidentally delete this key.

IMPORTANT: This article contains information about modifying the registry. Make sure that you understand how to backup and restore the registry, in case a problem occurs. Please read the linked Microsoft Knowledge Base article prior to editing the registry.
Go to Start » Run and enter "regedit."

Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion

With CurrentVersion Highlighted, go to the Edit menu and select New » Key

Name the key RunOnce, leaving everything else about the key alone.

The RunOnce key should now exist underneath the CurrentVersion key.
Once the key exists, Windows 2000/XP stops redetecting the Hardware
 

A:"cannot find the file specified" "during the installation of the device."

Read other 16 answers
RELEVANCY SCORE 75.2

I tried to record some audio with Auadacity but it won't work unless I enable the Wave Out Mix. I've tried the "right-click and choose Show Disabled Devices" trick but nothing shows up.
 

A:Cannot find "Wave Out Mix" or "Stereo Mix" in Vista

Bump.
 

Read other 1 answers
RELEVANCY SCORE 75.2

Hi!

Yeah so i've been searching some hours now for how to make my desktop look like this:
I don't care about the taskbar style, all i want is my desktop to look like that when i minimize everything, the clock and all! I think it's a really sexy look! I found the picture in an old thread on a forum and the user doesnt go there anymore. Im hoping someone here might have a clue!
I don't have any prior experience with this sorta stuff so im really clueless!

Thanks in advance!!

A:Trying to find this "theme" or "skin" or whatever to call it!

hi Lekandesanden, and welcome to sevenforums,

the clock and system information on the desktop looks like rainmeter.

i don't know which specific skin it is though...

looks like the screenshot originally came from here.

maybe you could try joining that forum and asking the OP - even though the post was nearly 2 years ago...

Read other 2 answers
RELEVANCY SCORE 73.6

Hello,

I have basic knowledge of the command terminal, in that I only know how to navigate through directories. Currently I am trying to execute the following:

java ?jar MRTBatch.jar ?d input_directory ?p parameter_directory\input_parameter_file ?o parameter_file_directory

I have already navigated to the correct directory to make use of the MRTBatch.jar tool, however the problem arises with my user inputs, which are of the form "C:\Users\My Name\Rest of path". I keep getting the error:

ERROR: Could not find directory "C:\Users\My Name".

When navigating directories earlier I always had to go find the file I wanted, copy its path location, paste it into the command terminal, and then erase the "C:\" portion (so it became cd\Users\My Name\Rest of path) for it to work. So when I got this error I have tried multiple edits for it to recognize the paths. Could it be as simple as switching the direction of the slashes? I would have thought the complete path name would always be best. Is it because I'm already burrowed down so far that it cant seem to recognize any file further back?

Here are the directions I am following, pg 40 titles "Automated Batch Processing": https://lpdaac.usgs.gov/sites/default/files/public/mrt41_usermanual_032811.pdf
My goal is to mosaic a bunch of satellite imagery using the MODIS Reprojection Tool (MRT).

Thank you for the help!

A:Command Prompt Error: "Cannot find directory "C:\Users\..."

Web site URLs use the forward slash / while path statements in the OS use the backslash \.

Your problem just may be that it needs to start from the root of the drive or C:\. If it starts at the standard Command Prompt it will already be looking below/inside C:\Users\your name\.

Read other 5 answers
RELEVANCY SCORE 73.6

"Windows cannot find C:\windpws\system32\rstui.exe"; also "wfn.exe"
Any help provided would be most appreciated.
Thank you!

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz, Intel64 Family 6 Model 30 Stepping 5
Processor Count: 8
RAM: 4026 Mb
Graphics Card: NVIDIA GeForce 310M , 512 Mb
Hard Drives: C: Total - 598095 MB, Free - 540781 MB;
Motherboard: TOSHIBA, NWQAA, 1.00, 123456789AB
Antivirus: Microsoft Security Essentials, Updated and Enabled
 

A:Windows7 cannot find "System Restore' and "Wondows Fax and Scan"

Read other 9 answers