Over 1 million tech questions and answers.

XPS 9000 Motherboard Front Panel LED Connector Wiring Layout

Q: XPS 9000 Motherboard Front Panel LED Connector Wiring Layout

What is the layout on the motherboard for the front panel LED connectors? The XPS 9000 manual does not specify that at all. The motherboard itself is model number 0X501H, as given by CPU-Z.

Is the layout the same as the one listed in this thread below regarding the XPS 8500?

en.community.dell.com/.../19586001

Read other answers
RELEVANCY SCORE 200
Preferred Solution: XPS 9000 Motherboard Front Panel LED Connector Wiring Layout

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 136

I am attempting to transfer the motherboard of my h50-50 to a different case.  I am doing this in order to make room for a much larger video card and psu that simply will not fit in the Lenovo case.  I have run into a bit of difficulty with the 'Front panel connector'.  If you look in the 'Lenovo H50 SeriesHardware Maintenance Manual' it is on page 28 (Lenovo H50-50).  I have been trying to find the specs on what each pin is for but have been unable to find such information.  Could someone please direct me to where I can find such information or could you please provide me with the details?  Specifically I am looking for the power switch pin(s), hdd activity pin(s) etc. thanks

A:H50-50 motherboard Front panel connector pin layout

Welcome to the Lenovo Community !
 
There is no documentation that I am aware of that show the pinouts of the various connectors on your motherboard.  I would just use an Ohm meter on your old H50-50 case and trace wires on the old front panel plug.  Once you know how the old plug was configured you will know the pin assignments on the motherboard. 

Read other 2 answers
RELEVANCY SCORE 133.2

I need to know about the layout of the io pins.

Read other answers
RELEVANCY SCORE 106.8

I've been looking for the front panel pin layout on the Dell Dual Xeon Motherboard with Dell P/N: 0WN7Y6 (it is a # zero, W, N, #7, Y, #6). 
The front panel connector is 27-pin...28 spots with one pin left blank. The pin layout isn't included in the manual and I'm trying to boot two of these motherboards without the 27-pin connector. I just need to know which pins need to be jumpered in order to test for boot to BIOS.
Any assistance would be greatly appreciated.
 

A:Dell Motherboard- P/N 0WN7Y6 Dual Xeon Motherboard Front Panel Pin Layout

Dell doesn't make the front panel connector pin-outs public. So unless you map them yourself or somebody else has done it...

Read other 3 answers
RELEVANCY SCORE 105.2

Hi Guys:

It's been a while since I've posted a question, however, this one is really bugging me. Recently, I've been putting together a lot of systems that have the 9-pin front-panel connection on the motherboard. The problem for me is that the ACPI/LED has only a
2-pin and most cases come with 3-pin cables. No mater which way I input the 3-pin cable, the front-panel LED light will not come on. Does anybody know what I'm referring? If you can Be of assistance, please give me some input.

Thanks.
 

A:Motherboard 9-Pin Front-Panel Connector

If the motherboard requires a 2 pin connector and the case manufacturer supplies a 3 pin connector just take the pins out of the connector and place them next to one another in the connector. There is a little tab on the connector you can lift up and slide the pin out. It's hard to explain here, but once you look at it closely you will see what I mean.
 

Read other 2 answers
RELEVANCY SCORE 102.8

Motherboard Front Panel connectors Zeus 60 R1 07G Samsung.
Pls send a picture of the panel or tell me which color wires to which one

Power button , HDD , LED Display





 

Read other answers
RELEVANCY SCORE 102.8

Hi, I just purchased a Gigabyte UD3R motherboard. My computer case is at least 6 years old (don't know make) and many of the connectors don't match description to motherboard.

Cables for Audio:

RETURN L (Blue)

RETURN R (White)

SPKOUT L (White)

SPKOUT R (Green)

GROUND (Black)

MIC BIAS (Yellow)

MIC-IN (Pink)
My case doesn't provide an HD audio module so I need to set it up for AC'97 functionality. The pin set up is as follows
Pin 1 - MIC

Pin 2 - GND

Pin 3 - MIC Power

Pin 4 - NC

Pin 5 - Line Out (R)

Pin 6 - NC

Pin 7 - NC

Pin 8 - No Pin

Pin 9 - Line Out (L)

Pin 10 - NC
Really appreciate the help. Thanks!
 

A:Solved: New Motherboard + Front Panel Connector Confusion

Most probably should work by:
MIC-IN to pin 1,
MIC BIAS to pin 3,
GROUND to pin 2,
SPKOUT R to pin 5,
RETURN R to pin 6,
SPKOUT L to pin 9,
RETURN L to pin 10.

Please don't mark threads solved if they aren't, less people will wander to the thread if it looks like no further help is needed.
 

Read other 1 answers
RELEVANCY SCORE 100.8

Would like to move my Precision T3500 Motherboard to Another box.
The Front Panel connector might be useful, but I have not found
any documentation of this.

Is there a Motherboard manual somewhere, or at least the pin definition of the Front Panel connector?

A:Precision T3500 Motherboard documentation (Front Panel connector spec)

.As with most Dells there is a proprietary Front Panel Board and 20 pin or more ribbon cable.

Dell Precision WorkStation T3500 I/O Panel Assembly with USB Audio I/O Control Panel, 29" Internal Audio Cable D/PN X389H, Front Panel Cable D/PN JN454, and Mounting Bracket, Dell M884G, MC532.
http://www.txcesssurplus.com/servlet/the-8929/Dell-M884G-Precision-T3500/Detail

 

Read other 18 answers
RELEVANCY SCORE 90

I'm looking at the layout of this connector

Read other answers
RELEVANCY SCORE 90

I bought a new case and the front panel power wires don't fit in my Mobo, can I clip the old front panel power wire off and rewire them onto my new front panel so I can actually plug it in and use the case?
 

A:Re-wiring front panel, how?

More info: the new case hookups are all 2 socket pins and my old case that actually works is a large socket that plugs into mobo
 

Read other 1 answers
RELEVANCY SCORE 90

I have just upgraded from an MS 6577 mobo to an Asus p4v8x-mx mobo. Everything was going smooth until i tried to connect the front panel connectors. They are very different from the pin layout on the mobo. Do I need to cut the connectors off and hook up single connectors to make this work? or is there an easier way?
 

A:Wiring front panel help

Read other 9 answers
RELEVANCY SCORE 90

Dear All

I am trying to wire a ASUS A8V mother board, but unfortunately the wiring that comes from the case does not match the names on the board. The wires are named HDD LED - reset SW -M/B SW - power LED - white wire with a minus - black with no markings - red with no markings. I enclose some pictures of the mother board, please can you advise me.

Regards

Hughie
 

A:front panel wiring

Read other 16 answers
RELEVANCY SCORE 88.8

I bought a new motherboard today and replaced everything, but the last plug i plug in would be the front panel cables (on/off, reset) and there NOT the same as the old motherboard, is there diffrent types...heres the diagrams:

OLD MB (. = pin)
. . . . . . .
. . . . . .

NEW MB
. . . . . .
. . . . . . .

is there a way to switch them around, or whats the deal?
 

A:Front panel wiring problem...

Read other 8 answers
RELEVANCY SCORE 88.8

Hi all,
My pc case doesn't have front panel audio on it at all but my mobo (Abit NF7-S) supports it.

I want to fit headphone and microphone sockets in the front to connect a headset to but I'm not sure on the microphone wiring.

The headset has a separate stereo 3.5mm plug for the microphone, my mobo book says the internal header has " audio mic" and "audio mic bias", I'm not sure exactly sure how to connect it.

Any help will be greatly appreciated,
Many thanx in advance, Rik.
 

A:Not sure about front panel audio wiring

"audio mic bias" is the ground wire for the phono socket, "audio mic" is the signal.
 

Read other 4 answers
RELEVANCY SCORE 88.8

I have just fitted a new M/brd. On my existing case I have 1 front USB 1.0 port. The new m/brd has a different connector so I am changing the wires to fit the correct pins. Does anyone know the cable values? My f/panel has 1 red,1 white,1green 1 thin black and 1 fat black cable..The pin locations on the M/brd are:
Pin 1 & 2 are VERG_FP_USBPWRO (which I presume is pwr)
Pin 3 & 4 are USB_FP 0- & 1-
Pin 5 & 6 are USB_FP 0+ 1+
Pin 7 & 8 are GROUND
Pin 9 Key and10 is USB_FPOC0
I presume I can use all the pins down one side only but why are there two blacks and I donít know which colours are -/+ Thanks for your help.
 

Read other answers
RELEVANCY SCORE 88

Am trying to connect the wires for the front panel switches of my new case to the motherboard. The wires from the front panel are clearly labelled ie. power, reset, HD led, power led etc. But there are no such labels on the motherboard . How do I now which goes where on the motherboard?
 

A:Front panel switch wiring problem

You should have received instructions with the motherboard, which should show the connections. If not go to the vendors web support site and you should find it.
 

Read other 1 answers
RELEVANCY SCORE 86

I have an Emachines T6536 tower computer. I was wondering if anyone out there has this computer, and if so, which sequence does the three sets of front panel wires connect to the motherboard.
 

Read other answers
RELEVANCY SCORE 86

Building new computer, ASUS P4C800-E Deluxe board

For the board 1394 connector, I was
able to match them up, but there are
2 less wires from the front panel port
than there are pins on the board

The board has two +12V pins, the panel has one
The board has three GND, the panel has two

Any problem?

For the USB in the front panel - don't know
if the panel is USB2 or not for sure, I do
know the board is -

Board has:

USB+5V
USB+6V
USB_P5-
USB_P6-
USB_P5+
USB_P6+
GND
GND

Frt panel has:

(1)+D
(2)+D
(1)-D
(2)-D
(1)+VCC
(2)+VCC
GND
GND

The numbers in (), above, actually are
numbers shown inside an O on the schematic

Except for the GNDs, I'm pretty much stumped there.

I think that's the last mystery I have to solve
to get my board all hooked up.

Thanks for any help!!
 

A:USB & 1394 Wiring Matchup Question, Front Panel to Board

USB+5V to (1)+VCC
USB_P5- to (1)-D
USB_P5+ to (1)+D
any GND to any GND

USB+6V to (2)+VCC
USB_P6- to (2)-D
USB_P6+ to (2)+D
any GND to any GND
 

Read other 2 answers
RELEVANCY SCORE 85.6

Does anyone know the front panel pin connector layout for the h50-50 cih81m motherboard? I am trying to move it to a new case and cannot find it anywhere. 

Read other answers
RELEVANCY SCORE 84.8

I bought a Lenovo M81 ThinkCentre SFF motherboard for a cheap gaming pc I am building.Well the issue is that every post I have found about the front panel pin layout isn?t workingThe case is FBM-01 By RosewillBut I have even tried the screwdriver method and nothing.I have the psu plugged in,the wires for that.And the basic components,ram,cpu,gpu,and the psu and nothing.What am I doing wrong?

Read other answers
RELEVANCY SCORE 84

What is the order of connection of the pin numbers for the front panel connector.

Eg: what number pin for the power switch etc.

This is for a E-machine D2685 mother board that i have recently purchased.
 

A:e-machine front panel connector

According to my eMachine files the D2685 has a FIC VC37GV Mainboard and uses a Intel standard 9 pin front panel header.

Attached is a pinout for that header.
 

Read other 1 answers
RELEVANCY SCORE 84

My motherboard is a model Ms-6330 Ver: 2.1 (Microstar) but it also has the gateway part number 2512595. I am currently relocating this motherboard to a brand new case that I just bought and I ran into a problem. The front panel connectors (power switch, led, hdd led, etc) go onto the motherboard in a certain area where there are 15 pins. Unfortunately I have no idea which connectors connect to which pins. Can someone help me? (Maybe someone with the same motherboard/problem). All I need is a way to identify the pins and make sure I don't like accidently fry my motherboard. Thanks a lot! -Andrew C.
 

A:Front Panel Connector on Mobo

Hi,
For starters, have you checked your manual? Also, look on the m/b...in really tiny abbreviated letters you should be able to see where these go (you may see "pw switch"...."HDD ACT"........i know when i was installing my connectors, i got most of them wrong..but dont worry..no frying of the motherboard.....if the connector is in the right place but no light from the LED..try reversing the cable........the easiest cables to place are the pw switch and the reset..as you can test these easily....good luck
 

Read other 3 answers
RELEVANCY SCORE 84

I have the mothermoard that comes with the TinkCentre E93 Desktop and I have since upgraded my computer case to something bigger and better looking. I managed to get everything connected besides the front panel connectors which are very important. The ThinkCentre motherboard is a bit weird in its layout and the ThinkCentre case had a single connector that connects into this pinout however, my new case has single connectors instead of a single 13 pin + 1 blank connector. My case has a connector which consists of a total of 9 pins.It would've been simple if the board had a marking indicating what each pinout is for and which is positive and negative but unfortunately there isn't any of  that. At the moment I can't seem to find any information at all with regard to how I should connect this. I would like to get opinions with regards to which pin goes where. This is the full specs of the desktop  

Read other answers
RELEVANCY SCORE 84

I just put in a Soyo P4I865PE Plus Dragon 2 into a POWMAX case. I had another Soyo Dragon P4X400-8235 mobo that had fried, and I'm replacing it.
What the mobo connector pins for the front panel require are the HDD LED, ACPI LED, PWRBT, RESET, POWER LED, KEY LOCK, SPEAKER.

My case has the SPEAKER, THE RESET, and the HDD LED, plus a POWER SW, and
one cable with
mic-bias
spkout r
spkout l
Return R
Return L

and 2 cables each with
+vcc
+D
-D
grounds.

So I have the SPEAKER, THE HDD LED and the RESET pins connected.

Right now I'm not getting any power. I suspect that it's because the POWER LED hasn't been hooked up. I don't know if hooking the POWER SW to the POWER LED will do any good--or any harm. Any suggestions, or do I need a different case?

Thanks for any suggestions, tips, or answers.
 

A:Front Panel Connector Pins

Read other 11 answers
RELEVANCY SCORE 84

I am currently in need of the exact front panel pin layout on a pttt9 motherboard. I have searched, but can't seem to find a diagram labeling which pins are for power, power led light, etc. Could someone send me a link? I would greatly appreciate it! Thanks!

A:Dell T3600 Pttt9 Front Panel Pin Layout

Dell doesn't make front panel pin-outs public for any PC model.
So unless somebody else has mapped them and posts here, you're on your own to figure them out.

Read other 6 answers
RELEVANCY SCORE 83.2

Hi everyoneWhile I took the front panel off of my case the other day I accidently removed the JAUD1 jumpers....and now my sound doesn't work. I downloaded the specific instruction guide from MSI for my motherboard and here's the section for it:The two right sound in and out cables were still attached, and I got sound out of my right speaker. But then when I connected the rest to what I thought was correct, I got sound out of my left speaker only. EDIT: I tried not attaching any of the cables and then I get no sound.The problem I have with these directions is that the cables are not labeled the same as the diagram. They are as follows:Purple - R INYellow - R OUTBlack - GNDGreen - MIC BIASBlue - L INRed - L OUTBlack - GNDOrange - MIC INCan anyone help with this? I'd love to have both of my speakers playing sound again....

Read other answers
RELEVANCY SCORE 83.2

So I basically have a very odd front panel audio connector setup, very confusing, I've made over 10 thread on different forums and non were able to help me.

I'm using a Gigabyte G31 motherboard GIGABYTE - Motherboard - Socket 775 - GA-G31M-ES2L (rev. 1.x)

Manual page for the motherboard output can be found below the first image

The front panel audio connectors consists of:
Yellow- MIC BIAS
Green - SPKOUT R
Peach - MIC In
Blue - Return L
Black - Ground
White - SPKOUT L
Grey - SPKOUT L

Much Thanks and appreciation to those who read this read

A:Front Panel Audio connector help needed

Your front panel connections aren't odd, but they are old. They are for the AC97 standard.

Set your onbaord audio to AC97 in the BIOS set-up.

The AC97 pinouts are here:

Desktop Boards — Front panel audio header pinouts

1 Mic In
2 Ground
3 Mic Bias
5 Spkout R
9 Spkout L

It looks like the onboard audio doesn't support the Return lines.

There should only be one Spkout L connector. It's the white (not gray) one.

Have you really been trying to figure this out for 5 months? Yikes.

If these connections cause your PC to go up in a fireball, don't blame me.

Read other 1 answers
RELEVANCY SCORE 83.2

Hello! Recently, I transferred my Dell Motherboard (From an Inspiron 560) to a new Rosewill Challenger-S case. All of that went fine and dandy but now I'm facing another problem: I don't quite know where to plug up the cables from the case's front panel (power switch, reset switch, HDD LED). I found a port on my motherboard labeled "Front Panel" which matches the ports, but one is missing like normal front panel connectors, and the cables only take up 6 out of the 9 pins. So the real question is, where do you plug up the cables, or do you even put them in that spot?


Sorry if that sounded really nooby,
JaxDrumm

A:Help with Front Panel/Power Button Connector

Take a close up picture of your motherboard and post it so we can see it. please.

Read other 1 answers
RELEVANCY SCORE 82.4

My motherboard USB connector is not compatible with my case front panel USB plugs. The USB connector on my motherboard (NetVista A22p 2292) is for one 10 (two rows) pin connector. The plugs on the tower (A-Top XBlade Black/Silver Ultimate Gaming Machine With 450W PSU & Side window, Model "AT859A-BK") front USB are two separate 4 pin USB plugs (They are VCC, USB1-, USB2+, GND pins w/GRN wire). What can I get or do to make them compatible? Thanks.

A:USB connector not compatible with case front panel USB plugs

See if this helps..not exactly sure if it will:http://www.ramelectronics.net/html/usb_adapter.html

Read other 1 answers
RELEVANCY SCORE 82.4

I recently tried to upgrade my mother board in my pc. The factory motherboard has a 14 pin front panel connector and the new motherboard has a 10 pin front panel connector. I had the bright idea of tinkering with the wires and rearranging them to fit the 10 pin input. I am currently trying to put all the original parts back together and the wires are still set up for the 10 pin connector and not the 14. Could anyone help me figure out which postions to put the wires in on the connector?


























IMG_4343.JPG ?1633 KB

A:Lenovo IdeaCentre K220 Front Panel Connector

Picture of the wires that go into the connector


























IMG_4345.JPG ?988 KB

Read other 1 answers
RELEVANCY SCORE 82.4

I need the Layup front panel connector HP Pavilion P7-1207c desktop pc

Read other answers
RELEVANCY SCORE 81.6

I found a lot of people searching for this information... since I was unable to find it, I tested the front panel connectors by myself, and that is what I found:
 
Power front panel (black connector)
 
+----+----+----+----+----+----+----+
| Bk | | | | | | |
+----+----+----+----+----+----+----+
| Yl | | Bk | Gn | Yl | Bk |xxxx|
+----+----+----+----+----+----+----+

+----+----+----+----+----+----+----+
| 1 | 3 | 5 | 7 | 9 | 11 | 13 |
+----+----+----+----+----+----+----+
| 2 | 4 | 6 | 8 | 10 | 12 |xxxx|
+----+----+----+----+----+----+----+

Description

1 Black Disk activiry led ground
2 Yellow Disk activiry led ground
3 Not connected
4 Not connected
5 Not connected
6 Black Power led ground
7 Not connected
8 Yellow Power led signal
9 Not connected
10 Yellow Power switch signal
11 Not connected
12 Black Power switch ground
13 Not connected
14 Locked (no pin)
USB front panel (yellow connector)
 
It's a standard internal USB connector, but with two additional ground wires
 
+----+----+----+----+----+----+
| Bk | Re | Wh | Gn | Bk | |
+----+----+----+----+----+----+
| Bk | Bw | Bl | Yl | Bk |XXXX|
+----+----+----+----+----+----+

+----+----+----+----+----+----+
| 1 | 3 | 5 | 7 | 9 | 11 |
+----+----+----+----+----+----+
| 2 | 4 | 6 | 8 | 10 |XXXX|
+----+----+----+----+----+----+

1 Black Ground
2 Black Ground
3 Red US... Read more

A:ThinkCentre front panel connector (power, audio and USB) pinouts (A60, M58, M71, M91, M92)

OK I am intrigued.  What are you trying to accomplish ... a hibrid A60 ?





T23: 2647-8RU, Ubuntu 12.04 LTSA61E: 6418-12U, W7/Pro 64X200: 7454-CTO, W7/Pro 32

Read other 9 answers
RELEVANCY SCORE 81.6

Hello, I've recently bought an m57p (type) motherboard and I'm trying to install into a new case. But I can't find any instruction or scheme how to connect front panel cables. Can anybody explane how to connect them? I now have 13 pins and I have any ideas how to connet them correctly. Please help me...

A:ThinkCentre M57p (type 9088) front panel connector...

Refer to this thread.   Thx. 
 
ThinkCentre-front-panels-power-audio-and-USB-pinout
 
 

Read other 1 answers
RELEVANCY SCORE 81.6

HiI am trying to determine which type of 3.5mm audio plug to put into the front panel connector for using headphone with a microphone to do video communications. could be - sleeve, ring and tip (mono sound and microphone)orcould be - sleeve, ring, ring, and tip (stereo sound and microphone) Have read through the manuals and nothing is said about which type to use.

A:Front panel audio connector - what plug type to use for head...

Hi, I can't see your image but probably you can see mine   (a) All standard 3.5mm (stereo) headphones will fit and work.(b) For the second port on the right, all standard 3.5mm headsets will fit and work. Its default is for microphone, all standard 3.5mm mono microphones will fit and work. Note: probably around 95% of 3.5mm headphones and microphones on the market now are normal/standard. Regards.

Read other 1 answers
RELEVANCY SCORE 81.6

I have Workstation xw4600 motherboard E93839 front panel connector is a 18 Pin. I cannot connect the front panel such as power switch button, reset button, HDD LED, and etc. Is there a pinout schematic for this motherboard's front pannel? I have ws ug xw4600 strg 453080-001 screen PDF that is the motherboard. Does not give the 18 Pin conector. Thank you for your time.

A:workstation xw4600 E93839 front panel connector to the mothe...

Above on the left is this specific forum's search box, and if you type in pinout and then hit return you will find what you need.  The HP workstations of this era (xw6400 xw6600 xw4600 etc) used very similar pinouts with slight variations, and there are excellent posts in there where you can see all the variations.   All the important ones will be there for you.  Even the wiring colors have been quite uniform.  Makes sense they would do it that way.

Read other 1 answers
RELEVANCY SCORE 80.8

I'm assuming these are not USB 3.0 ports but what kind of USB bracket plugs would work here?  

Read other answers
RELEVANCY SCORE 80.4

I found a lot of people searching for this information... since I was unable to find it, I tested the front panel connectors by myself, and that is what I found:
 
Power front panel (black connector)
 
+----+----+----+----+----+----+----+
| Bk | | | | | | |
+----+----+----+----+----+----+----+
| Yl | | Bk | Gn | Yl | Bk |xxxx|
+----+----+----+----+----+----+----+

+----+----+----+----+----+----+----+
| 1 | 3 | 5 | 7 | 9 | 11 | 13 |
+----+----+----+----+----+----+----+
| 2 | 4 | 6 | 8 | 10 | 12 |xxxx|
+----+----+----+----+----+----+----+

Description

1 Black Disk activiry led ground
2 Yellow Disk activiry led ground
3 Not connected
4 Not connected
5 Not connected
6 Black Power led ground
7 Not connected
8 Yellow Power led signal
9 Not connected
10 Yellow Power switch signal
11 Not connected
12 Black Power switch ground
13 Not connected
14 Locked (no pin)
USB front panel (yellow connector)
 
It's a standard internal USB connector, but with two additional ground wires
 
+----+----+----+----+----+----+
| Bk | Re | Wh | Gn | Bk | |
+----+----+----+----+----+----+
| Bk | Bw | Bl | Yl | Bk |XXXX|
+----+----+----+----+----+----+

+----+----+----+----+----+----+
| 1 | 3 | 5 | 7 | 9 | 11 |
+----+----+----+----+----+----+
| 2 | 4 | 6 | 8 | 10 |XXXX|
+----+----+----+----+----+----+

1 Black Ground
2 Black Ground
3 Red US... Read more

A:ThinkCentre front panel connector (power, audio & USB) pinouts (A55, M58, M71e, M73, M91, M92, M93)

OK I am intrigued.  What are you trying to accomplish ... a hibrid A60 ?





T23: 2647-8RU, Ubuntu 12.04 LTSA61E: 6418-12U, W7/Pro 64X200: 7454-CTO, W7/Pro 32

Read other 9 answers
RELEVANCY SCORE 79.6

I found a lot of people searching for this information... since I was unable to find it, I tested the front panel connectors by myself, and that is what I found:
 
Power front panel (black connector)
 
+----+----+----+----+----+----+----+
| Bk | | | | | | |
+----+----+----+----+----+----+----+
| Yl | | Bk | Gn | Yl | Bk |xxxx|
+----+----+----+----+----+----+----+

+----+----+----+----+----+----+----+
| 1 | 3 | 5 | 7 | 9 | 11 | 13 |
+----+----+----+----+----+----+----+
| 2 | 4 | 6 | 8 | 10 | 12 |xxxx|
+----+----+----+----+----+----+----+

Description

1 Black Disk activiry led ground
2 Yellow Disk activiry led ground
3 Not connected
4 Not connected
5 Not connected
6 Black Power led ground
7 Not connected
8 Yellow Power led signal
9 Not connected
10 Yellow Power switch signal
11 Not connected
12 Black Power switch ground
13 Not connected
14 Locked (no pin)
USB front panel (yellow connector)
 
It's a standard internal USB connector, but with two additional ground wires
 
+----+----+----+----+----+----+
| Bk | Re | Wh | Gn | Bk | |
+----+----+----+----+----+----+
| Bk | Bw | Bl | Yl | Bk |XXXX|
+----+----+----+----+----+----+

+----+----+----+----+----+----+
| 1 | 3 | 5 | 7 | 9 | 11 |
+----+----+----+----+----+----+
| 2 | 4 | 6 | 8 | 10 |XXXX|
+----+----+----+----+----+----+

1 Black Ground
2 Black Ground
3 Red US... Read more

A:ThinkCentre front panel connector (power, audio & USB) pinout recase (M58, M71e, M73, M91, M92, M93)

OK I am intrigued.  What are you trying to accomplish ... a hibrid A60 ?





T23: 2647-8RU, Ubuntu 12.04 LTSA61E: 6418-12U, W7/Pro 64X200: 7454-CTO, W7/Pro 32

Read other 9 answers
RELEVANCY SCORE 78.4

Hi (a post after a long time)
I've a F90M motherboard (with intel 915G chipset - i gues chipset doesn't have to do anything with front panel connections, but ... ). It came out of Acer 3700GX PC (i think its a bit old ).
Ok, now i'm trying to put it in a standard larger ATX casing. I've fitted it in and everything works fine except the front panel connections. I cannot identify the front panel connections and could only manage to identify the power switch pins on the motherboard.

I've searched over internet and couldn't find a manual of the motherboard (found manual for the PC on www.nodevice.com but it doesn't tell how to connect front panel)

so can you guys please suggest me the connections for front panel LEDs, Audio and USB.

and i really believe that you TSG guys are up to it

Thanks in advance
 

A:Identify motherboard's front panel connections | PC Acer 3700GX | Motherboard F90M

no replies????

is it such a hard/stupid question??
 

Read other 1 answers
RELEVANCY SCORE 76.4

Situation
I just bought a new motherboard and a new Amd Phenom II 965 Black Edition Processor.
I believe I have installed everything correctly except for the the System Panel(The case power button which has 20-8 connector)I have 2 cords coming from the area near my power button one has 4 connection holes. The other one has 9(It's got a ton of different color cords combine).

Problem
I am not sure how to get the power button to work or even light up. If I plug in the 4 hole connector in a certain way the computer when plugged in turns on using the I/O but nothing comes up on the screen.The fans and lights however go(excluding the power button light).

I also have no idea whether which cord connects my 15 in1 Card reader(for cameras).

My Computer
Vista 64 bit(I have a windows 7 professional cd I plan on installing)
My motherboard is a M4A78-EM.
I have an Hp Pavilion.
Put in a new power supply,ram and graphics card awhile back.
Nvidia Gts 250
550 Watt power supply
8 Gigs of Ram
Amd Phenom II 965 Black Edition Processor

I could really could use help!

To Clarify what im trying to do
Need help connecting an HP Pavilion Power Button cord to my M4A78-EM motherboard.
 

A:Problem:New motherboard and Panel connector!

Read other 11 answers
RELEVANCY SCORE 75.2

I have a Foxconn C51GU01 uBTX motherbaord. I am trying to switch the case out from the gateway to my Antec. The problem I am having is this motherboard is not labeled like any I have ever seen.

The front panel looks like this: http://support.gateway.com/s/MOTHERBD/FIC/105552/105552mvr18.shtml

If someone could help me connect the front panel correctly it would be appreciated. My desktop is just taking up space because I cant figure it out.

Thanks in Advance.
 

A:Motherboard Front Panel

This appears to use a standard Intel front panel pinout.

Looking at the picture pin #1 is the upper right pin in the graphic. On that side you will only use 4 pins. They are pin 1, 3, 5 and 7

Only the bottom row of pins you will also only use 4 pins. These are pins 2, 4, 6, & 8.

Pin 1 & 3 are HDD actively LED

Pins 5 & 7 are the Reset switch

Pin 9 is a No Connect

Pins 2 & 4 are Power LED

Pins 6 & 8 are On/Off Power Switch

Pin #9 should be Blank

Normally;

(Reset Switch) Pin 5 is Negative, pin 7 is Positive

(On/OFF Power Switch) Pin 6 is Positive, pin 8 is Negative

If the Power LED and the HDD LED don't work properly, just turn the KK connector plug 180į
 

Read other 1 answers
RELEVANCY SCORE 74.4

Hi Everyone,
This is my first post here, so Hello!

O.K I just got a computer sent to me the was built by one of my relatives. I switched the motherboard in it for my own use. I need To put some Front Panel stuff back on the motherboard (HDD LED, Power Switch, Power LED, Reset) But I have no idea HOW! I looked at the manual online, NO HELP AT ALL . Please, I'm online right now I will answer any questions!

-Jason
 

A:Please Help! New Motherboard Front Panel stuff

Read other 9 answers
RELEVANCY SCORE 74.4

The front panel switches of my (old) case when attached to the slots on the motherboard fail.
When all is plugged in and switched on, PC fails to turn on. The F/P switches are: | M/B SW | HD LED | Power LED +/- | RESET SW.

And I have tried the M/B SW (green and black cable) is all the available slots on the motherboard and still it doesn't switch on the computer. At first I thought it was because my PSU was only 400W and read in the manual somewhere about it needing at least 500W so I bought a 620W one and still it doesn't work.

The mobo is: GIGABYTE GA-H61M-S2PV GEN3 Intel H61 (REV B3)

Any ideas/solutions appreciated?

Thanks
 

A:Front Panel Switches / Motherboard

You can get the motherboard manual from the manufacturers website. See here> http://www.gigabyte.us/products/product-page.aspx?pid=4065#manual

The pinout and where the cables connect will be covered in the manual. You can test the motherboard by simply connecting the two pins (the power switch pins) with a metal object (ie: screwdriver, paperclip, scrap of wire, etc.).
 

Read other 1 answers
RELEVANCY SCORE 74.4

Hi all,
I had my power supply fry and replaced it with a new box. I have an Intel fw82371eb SL37M motherboard. I am trying to hook up the 5 front panel cords to it. I've been searching for a manual and I can't find it on any sites. I appologize for the incorrect wording. I'm not good with computer terminology. The manuals that I have seen have a single row of pins. The pins on my board are in two rows. Back row with 8 pins and 7 in the front row with the second to the left missing a pin. I need to hook up the HDD LED, POWER SW, RESET SW, SPEAKER, AND POWER LED. Does anyone know of a link to a manual or can you tell me how to hook these cords up? Thank you in advance!! If you need more info let me know....
 

A:Motherboard front panel setup

Read other 14 answers
RELEVANCY SCORE 74.4

I want to connect a front panel HD audio to my computers but not sure what goes where on the motherboard headers. Just to clarify two completely different systems no connection apart from network.
The front panel lines are Bass, Centre, Gnd, Rear-R, Rear-L, Front-R, Front-L, Mic ?L & Mic-R. No problems with Gnd, but that leaves the other lines.
The motherboard headers are:
On the Gigabyte motherboard the 2 mic and gnd are obvious but what lines do the ACZ_Det , FAudio_JD & Line2 L & R go to.
On the ASUS motherboard Port1 L & R, Port2 L & R, Sense_Send, Presence#, Sense1_Retur and Sense2_Retur.
Oh where is the naming convention for these things

A:Front panel to motherboard connection

Hi Bursal, welcome to 7F!

Since you failed to fill out your System Specs, except that you are working with Gigabyte, and Asus MB's it took me a while to at least get you to where you need to go to find the information you are looking for.

For Gigabyte go to: GIGABYTE - Support & Downloads - Downloads - Motherboard
You will see that there are already a list of MB's, and you can download their manuals there, but if you don't want to go through at least 6pages I suggest you do the search.

To give you a look at what I found, and make no mistake. I have no idea if this is your board.
These pixs are from a GA-P41T-D3P User's Manual:
Descriptions to all the connections are below each diagram.

For the Asus it is a little different.
Go to: ASUSTeK Computer Inc. -Support- Drivers and Download
From there you can either automatically detect your MB or manually drill down for the manual of your board.

You already have the information you seek if you have the manuals to these boards

Read other 9 answers
RELEVANCY SCORE 74.4

hi, i bought a graphics card and new psu which i installed great, but i also bought a new case and tried to install everything from the pc into the new case but i couldnt find were the power sw, reset sw and usb 3.0 front pannel connctor cables  go as their is no manuel (or so i think) for the hp willow motherboard and it doesn't specifiy where they slots are.

Read other answers