Over 1 million tech questions and answers.

An Error Occurred While Applying MBAM Policies (Error Code: -2143485933)

Q: An Error Occurred While Applying MBAM Policies (Error Code: -2143485933)

We recently deployed MBAM. While most users are not having issues, there is a group of users that continuously get prompted for the Recovery key every boot up. They wont even get prompted for the PIN. we have tried:
Turning bitlocker on and off (un-encrypt & re-encrypt)
Suspend and enable. (suspend, reboot, re-enable)

TPM is on & activated on the problematic machines. they are different models. All computers in the environment are legacy boot (BIOS) and both, but no one is set to only UEFI.

If the UEFI was the issue everyone would have this issue. BIOS is up to date on these machines. These are mainly Lenovo T430 and T460, and one Dell XPS touch screen (2016)
Sadly this is hindering some of the top people within the company. I have researched this error code with no avail. any assistance would be greatly appreciated!

Read other answers
RELEVANCY SCORE 200
Preferred Solution: An Error Occurred While Applying MBAM Policies (Error Code: -2143485933)

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 90.8

Good day everyone,

I have searched the forum and failed to find an answer to my problem. I am currently having problems accessing one of my internal hard drives (not the one with Windows system files).

When I right click > Properties > Security > Edit
to edit the permissions of my drive X:\ I get the error noted in the image below. I'm not certain why im getting this error but it is absolutely frustrating. I run an SSD and I'd like to able to install certain programs on drive X:\ but since I do not seem to have full control, I am not able to.

I have tried using Take Ownership (which is described in [URL=" post[/URL] ) but I still get the error.

I have tried to run Windows Explorer as an Administrator, same results.



I believe I have covered the main troubleshooting steps that are suggested in this forum so if anyone else has any ideas, I'd love to hear them

A:An error occurred while applying security information, $$PendingFiles

Does this have anything to do with your problem?

Sounds like that happens when ProgramData or Program Files got accidently moved.






Quote:
Rename or delete $$PendingFiles, create a new $$PendingFiles on the partition that has ProgramData, and (assuming the new partition is d do

mklink -j c:\$$PendingFiles d:\$$pendingFiles


is that $$PrendingFiles folder hidden on the SSD? I've never seen that before so it must be something new with SSD's on how they store data. Hopefully it's not your partition!

Read other 1 answers
RELEVANCY SCORE 85.2

My unattended XML file:
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
    <settings pass="windowsPE">
        <component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SetupUILanguage>
                <UILanguage>en-us</UILanguage>
            </SetupUILanguage>
            <InputLocale>en-us</InputLocale>
            <SystemLocale>en-us</SystemLocale>
            <UILanguage>en-us</UILanguage>
            <UILanguageFallback>en-us</UILanguageFallback>
            <UserLocale>en-us</UserLocale>
        </component>
        <component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad... Read more

Read other answers
RELEVANCY SCORE 84.4

Has anybody received this error message? I've found other threads where people post the same problem, but I haven't seen any solutions. Essentially, every time I troubleshoot ANYTHING (wifi-connectivity, printer troubleshooting, etc.), I get this error message.

I got this error message when troubleshooting my printer. It states: An unexpected error has occurred. The troubleshooting wizard can't continue.

Package ID: Unknown
Path: Unknown
Error code: 0x80070005
Source: Temporary files
User: JJ-HP\JJ
Context: Restricted.

Any ideas?

A:An error occurred while troubleshooting. Error code 0x80070005.

Hi and welcome to SevenForums,
Create a new administrator account,
http://windows.microsoft.com/en-us/Windows7/Create-a-user-account
If the issue does not occur in new user account then refer the following link to fix the corrupted user account.
Fix a corrupted user profile - Windows Help

Read other 4 answers
RELEVANCY SCORE 84

Whenever I attempt to update or correct mp3 details in Windows Explorer I ALWAYS get this message. This problem is as old as Windows 7 and still no valid explanation or solution. BTW, I refuse to install any type of Apple software ESPECIALLY iTunes as it
rewrites the registry entries for ALL optical drives rendering them unusable to the point they are even removed from Windows Explorer! I am sick and tired of this constant bull coming from Apple and Microsoft. WinXP had no problems whatsoever in this area
so I guess that explains why the supposedly college educated programmers at Microsoft broke it. They seem to excel in that area with ALL of their software and misclassified updates like the barrage of Get WinX crap they constantly claimed was "Important"
when it was anything but. The problem doesn't exist in Win 8, 8.1 or 10 so why in Win 7?

System Info:
Windows 7 Ultimate 64-bit SP1 (6.1.7601)
32 GB RAM
AMD FX-8370 Eight core CPU 4.0 GHz

Redmond... We have a problem.

Read other answers
RELEVANCY SCORE 80

I have a RemoteApp server setup (Windows 2012 R2) with SSO enabled. This RemoteApp server is for internal use only. I have no issues with any of my clients running Windows 7 or above. On Windows XP however, I can only connect to the RemoteApp session once
and then I get the error An authentication error has occurred (Code: 0xc00002fd). If I reboot the PC, it will again work once and then get the error.
The other thing we discovered is that when you first close the RemoteApp session, the mtsc.exe process remains active for 30 seconds or so. As long as that is active, I can re-enter the RemoteApp session multiple times. The moment I kill that process, I
get the error and must reboot.
I'm pretty sure something is being cached on the client side, but every lead I have found has not resulted in a resolution.
Anyone have any ideas? (Btw, "get off of XP" is not an option at this time. lol)
Any assistance would be great.

Robert Doyle | Network Administrator | Five Below, Inc.

Read other answers
RELEVANCY SCORE 78.4

I have tried everything to sort this issue out. I am trying to install a patch for pro evolution soccer 2013 and as it is installing i get the error message in the title, i have tried changing take ownership options, i have looked at tutorials on it and have even done the take ownership hack but i have get the same error message when installing.

I even have issues with you dont have permission when move a dll file to the pro evolution soccer game directory. I have to restart for it to work and once i quit out of the game the dll disappears and when i try to take it out of the rar file i get same issue.

Im tearng my hair out.

A:an error occurred while trying to rename a file code 5.

Have you tried right clicking the patch.exe and click "run as administrator"?

Read other 2 answers
RELEVANCY SCORE 77.6

Hi there, Im having a problem when I try to install the Virgin Media Hub to add internet security to my pc. I have taken some screen shots from my pc to show you what Im dealing with. (See below)
Code:
An unexpected error has occurred that this application cannot recover from. It will now close.
Code:


[FONT=Times New Roman][SIZE=3]Exception Code: 3221225477[/SIZE][/FONT]
[FONT=Times New Roman][SIZE=3]Exception Address: 77C46FA3[/SIZE][/FONT]


I have done a lot of research on search engines about this error and a lot of people are saying it is something to do with the start up registries and that one of my previous programs hasnt been uninstalled successfully even though I have deleted all files I could find about my previous internet security programs.

So, if they are correct about the start up registries being wrong I tested it and unticked everything from the start up registry. (Displayed in the image below)

I rebooted my pc and still had no luck when trying to install the virgin media program and I am still stuck with the same error.

I called up virgin media but they said the problem is on my side.

Any help would be great!
 

Read other answers
RELEVANCY SCORE 74.8

I am trying to install the MBAM Administration and Monitoring Server on Windows Server 2008R2.  I have passed all the pre-requisite checks and fro testing purposes was wanting to set up just one server as the full MBAM server. I have the database
installed with reports successfully running.
The wizard runs for a period of time before failing.  The error code appears to point to the need to run the setspn command.  However, it is not clear in the documentation what objects and services need to have the SPN set in order to make this
installation succeed.  
Here Is the end of the Log file. Any Help is appreciated:
Property(S): ProductToBeRegistered = 1
MSI (s) (AC:B4) [15:53:11:787]: MainEngineThread is returning 1603
MSI (s) (AC:C4) [15:53:11:798]: RESTART MANAGER: Session closed.
MSI (s) (AC:C4) [15:53:11:798]: No System Restore sequence number for this installation.
MSI (s) (AC:C4) [15:53:11:799]: User policy value 'DisableRollback' is 0
MSI (s) (AC:C4) [15:53:11:799]: Machine policy value 'DisableRollback' is 0
MSI (s) (AC:C4) [15:53:11:799]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (AC:C4) [15:53:11:800]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2

MSI (s) (AC:C4) [15:53:11:802]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2

MSI (s) (AC:C4) [15:53:11:803]: Decr... Read more

A:MBAM Installation Failing with MSI error code 1603

Hi ,

Please kindly understand this is Windows 7 forum. In order to get the answer effectively, I suggest you contact Windows Server Forum for further assistance. Thank you for your understanding. 

Windows Server Forum
http://social.technet.microsoft.com/Forums/en-US/category/windowsserverTracy Cai
TechNet Community Support

Read other 5 answers
RELEVANCY SCORE 68.4

Hello all,

I have a problem with Windows Update agent on Windows 7 SP1 enterprise.
We are using Configuration Manager 1606 and Windows 7 SP1 and about 140 computers works without any problem.
On the other 10 computers I got the following error message in the windowsupdate.log:
WARNING: SyncUpdates failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
WARNING: SOAP Fault: 0x00012c
WARNING:     faultstring:Fault occurred
WARNING:     ErrorCode:InvalidParameters(7)

I've tried several actions although none does any help. Here is the list of actions:
- upgrade windows update agent to the latest version
- windows update agent reset by this instructions https://support.microsoft.com/en-us/help/971058/how-do-i-reset-windows-update-components
- empty Temporary Internet files
- check the rules and blocked traffic on windows firewall and physical firewall between server and workstation vlan
- sfc /scannow

It looks like significant Windows 7 error, although reinstalling is not my option.

Thanks for any help!
GregaR

Read other answers
RELEVANCY SCORE 66.8

Symptoms: When you try to view any one of the following dialog boxes, the dialog box may appear to be empty or partly empty: Search Companion User Accounts Windows Update Help and Support System Restore When you try to start Microsoft Windows Media Player, you may receive an "An internal application error has occurred" (or a similar) error message.

Internet Explorer may not be able to print. When you click File, and then click Print, the Print dialog box does not appear. The print preview is blank.Cause:This issue may occur if one or more of the Jscript registry key settings are incorrect. This behavior may also occur if the Jscript.dll file is missing or damaged.Method 1: Reregister Jscript.dll and Vbscript.dll Click Start, and then click Run.

In the Open box, type regsvr32 jscript.dll, and then click OK.

Click OK.

Click Start, and then click Run.

In the Open box, type regsvr32 vbscript.dll, and then click OK.

Click OK.If either of the files do not register as expected, or if you receive an error message, the system file may be missing or damaged. To extract the missing file in Microsoft Windows XP, follow these steps: Click Start, and then click Run.

In the Open box, type msconfig, and then click OK.

Click Expand File.

In the File to restore box, type the name of the file that you want to restore.

In the Restore from box, type the path of the Windows XP .cab file where you want to restore the file, or
click Browse From ... Read more

A:How To Fix Windows Media Player Error - An Internal Application Error Has Occurred

i've tried both methods but nothing seems to work. i can't even uninstall the application or reinstall it.
please help if there is another method. thanks.

Read other 5 answers
RELEVANCY SCORE 66.8

I have an error message: An error occurred while loading a file. AOL will attempt to restore the file. My emails, however, are affected. I have email icons without subjects. The emails do open but I cannot know what they are or who sent them prior to opening and I cannot download attachments, answer or forward the messages. This is a potential disaster if I cannot fix this quickly.

Any help appreciated.

A:Error message: An error occurred while loading a file. AOL will attempt to restore...

Quote:





Originally Posted by Feetone


I have an error message: An error occurred while loading a file. AOL will attempt to restore the file. My emails, however, are affected. I have email icons without subjects. The emails do open but I cannot know what they are or who sent them prior to opening and I cannot download attachments, answer or forward the messages. This is a potential disaster if I cannot fix this quickly.

Any help appreciated.





ok your issue is aol....

if you need to use aol, go to aol.com you can check your email there via the web so you should have no problems with downloading or what not

now onto aol.... dont use it unless you HAVE to

contact aol for support for their program..

thanks
Wolf~

Read other 4 answers
RELEVANCY SCORE 66.8

Please someone help me!

I am running XP Home edition, with IE 8. All updates have been installed for both packages, in addition all updates for other programs have been updated and installed when appropriate.

MS Office 2000 (With MS Outlook 2003) has been working on my POC almost flawlessly for several years. All of a sudden it has been acting funny. So I decided to reinstalled / repair it.

I have a hard time updating and repairing Office 2000. I keep getting the error message code 1316, networking error. DATA1pro.msi. I have followed MS help site word by word, but to no avail. http://support.microsoft.com/kb/263253

I did a virus info update and full scan
Scanned for spy ware, with two packages, Ad Aware and A-Square.
Defragged
Checkdsk
Registry cleanup
Removed all startup items that arent necessary
Tried disabling the anti-virus software
I also ran an XP system repair and a system file check
Cleared all Temporary Internet Files and cookies, etc. (I usually run http://www.ccleaner.com/ CCleaner on start-up).
I disable the Find Fast Indexer http://support.microsoft.com/default...&Product=ofw97
or http://tinyurl.com/tkwm
Tried to run system restore and did not work.
I copied the entire CD's content to the hard drive and perform following steps:
o xcopy e:\newcopy /f /s /e /i /h
- Opened the Setup.ini file on the hard drive
- Changed the "MSI=Data1Pro.msi" line to "MSI=Data1.msi"
- Saved the changes m... Read more

Read other answers
RELEVANCY SCORE 66.8

Hello Friends,

This is getting me nuts...please help......

I have reinstalled my Vista home premium 32bit OS, and now i am not able to install my vodaphone router software....during installation of software i get the error messges

Error 1935.An error occurred during the installation of assembly 'Microsoft.VC80.ATL,type="win32",version="8.0.50727.762",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86"'. Please refer to Help and Support for more information. HRESULT: 0x800736B3. assembly interface: IAssemblyCacheItem, function: Commit, component: {97F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}

i have looked into even viewer and found...........error

Activation context generation failed for "C:\Program Files\Common Files\AccSys\AccVSSvc.exe". Dependent Assembly Microsoft.VC80.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.762" could not be found. Please use sxstrace.exe for detailed diagnosis

sxstrace.exe could not give me much info.....

please suggest how to proceed...this is fresh installation, not sure if previous installation carrying .Net Framework...

thank you
SBE

A:Error 1935.An error occurred during the installation of assembly 'Microsoft.VC80.ATL,

Hello and welcome to the Vista Forums!

It is not .net Framework that you need, but the Visual C++ Runtimes, in particular the 2005 ones.

? Download and install the following VC++ Redistributables in the following order: 2005; 2005 SP1; 2008; 2008 SP1, 2010

Web addresses:
1. Download details: Microsoft Visual C++ 2005 Redistributable Package (x86)
2. Download details: Microsoft Visual C++ 2005 SP1 Redistributable Package (x86)
3. Download details: Microsoft Visual C++ 2008 Redistributable Package (x86)
4. Download details: Microsoft Visual C++ 2008 SP1 Redistributable Package (x86)
Download details: Microsoft Visual C++ 2010 Redistributable Package (x86)

Retry. That should solve the issue. If it does not, I shall teach you sxstrace.exe!

Richard

Read other 8 answers
RELEVANCY SCORE 66.8

First my machine specs:

http://www.evga.com/community/ModsRi...asp?sysid=5160

Im using Windows 7 Ultimate x64.

Im having some issues with my computer freezing, this occurs while using a "patcher" to download content to a mmo game and sometimes while playing 3d games.

My event viewer has this all the time:

--------------------------------------------------------
A corrected hardware error has occurred.

Reported by component: Processor Core
Error Source: Corrected Machine Check
Error Type: Generic Cache Hierarchy Error
Processor ID: 0

The details view of this entry contains further information.
--------------------------------------------------------

[ Name] Microsoft-Windows-WHEA-Logger
[ Guid] {C26C4F3C-3F66-4E99-8F8A-39405CFED220}

EventID 19

Version 0

Level 3

Task 0

Opcode 0

Keywords 0x8000000000000000

- TimeCreated

[ SystemTime] 2010-04-20T19:25:49.490400000Z

EventRecordID 5406

- Correlation

[ ActivityID] {954A60D4-EFE5-4F8B-B054-8D11A7E15C9D}

- Execution

[ ProcessID] 1488
[ ThreadID] 2096

Channel System

Computer blabla-PC

- Security

[ UserID] S-1-5-19


- EventData

ErrorSource 1
ApicId 0
MCABank 3
MciStat 0x9020010c0320100e
MciAddr 0x0
MciMisc 0x0
ErrorType 7
TransactionType 256
Participation 256
RequestType 256
MemorIO 256
MemHierarchyLv... Read more

A:A corrected hardware error has occurred, Generic Cache Hierarchy Error

Please provide this information: http://www.techsupportforum.com/f217...ns-452654.html

Although you haven't mentioned any BSOD's, the info will provide us with some details so we can try to figure this out.

In general, a machine check is related to an error that's recognized by your CPU and reported to Windows. There's not usually much information in the error reports so we have to fiddle around trying to figure it out.

Most often these are either hardware problems (something's busted) or compatibility issues (either software or hardware).

Read other 1 answers
RELEVANCY SCORE 66.8

I turned on my PC today for the first time in maybe 6mo, slow to boot up but that's expected. Got maybe ten minutes into using it (just fine, might I add. Linked to wifi, etc) and Norton popped up needing to restart the computer. Hit restart now, ten minutes
go by, PC is still trying to shut down. Black screen but the fan is running. I shut it off completely, push the power button again, and get the disc error. Try to restart twice with CtrlAltDel but same error. Finally soft reset (or try to, no indication that
holding the power button does anything) and then got the "Error loading operating system" screen. Now depending on how I restart it (trying to boot from the BIOS menu or boot menu) I get the disc read error but eventually come back to the OS error.

Nothing can get me into the system, period. I'm doing this from a secondary non-PC device. Any help is appreciated. I can get by on software fixes but I'm completely useless with hardware so all of the quick fix tips I've vaguely read have mentioned removing
things from the actual console which I'm hoping I won't have to do.
Please help thanks

Read other answers
RELEVANCY SCORE 66.8

Symptoms: When you try to view any one of the following dialog boxes, the dialog box may appear to be empty or partly empty: Search Companion User Accounts Windows Update Help and Support System Restore When you try to start Microsoft Windows Media Player, you may receive an "An internal application error has occurred" (or a similar) error message.

Internet Explorer may not be able to print. When you click File, and then click Print, the Print dialog box does not appear. The print preview is blank.Cause:This issue may occur if one or more of the Jscript registry key settings are incorrect. This behavior may also occur if the Jscript.dll file is missing or damaged.Method 1: Reregister Jscript.dll and Vbscript.dll Click Start, and then click Run.

In the Open box, type regsvr32 jscript.dll, and then click OK.

Click OK.

Click Start, and then click Run.

In the Open box, type regsvr32 vbscript.dll, and then click OK.

Click OK.If either of the files do not register as expected, or if you receive an error message, the system file may be missing or damaged. To extract the missing file in Microsoft Windows XP, follow these steps: Click Start, and then click Run.

In the Open box, type msconfig, and then click OK.

Click Expand File.

In the File to restore box, type the name of the file that you want to restore.

In the Restore from box, type the path of the Windows XP .cab file where you want to restore the file, or
click Browse From ... Read more

A:How To Fix Windows Media Player Error - An Internal Application Error Has Occurred

i've tried both methods but nothing seems to work. i can't even uninstall the application or reinstall it.
please help if there is another method. thanks.

Read other 5 answers
RELEVANCY SCORE 66.8

Greetings,

I am in desperate need for some assistance. My laptop recently has been giving this message before reaching the desktop: "A disk read error occurred. Press ctrl+alt+del to restart. I have tried restarting multiple times (including manually restarting), but I ended up receiving the same error. My operating system is Windows XP.

What can I do to approach this problem? I would be very grateful for any assistance.

~Trav.~
 

A:Solved: Desperate need for assistance for error message: "A disk read error occurred.

Read other 16 answers
RELEVANCY SCORE 66.8

Hello. Can someone help me please? Windows7 Professional 32Bit.

Whenever i try to enable .NET Framework 3.5.1 in Turn windows features on or off, this error approaches me. What should i do?

Tried sfc /scannow and didn't help at all. Please help me.

Read other answers
RELEVANCY SCORE 66.8

I recently re-installed windows and am now trying to install the DirectX End-User Runtimes (June 2010). All goes well, it installs everything, but as it finished I get this error:
I have tried redownloading, using other installers and updating my graphics drivers. Nothing will work. It's probably worth mentioning that the first time I tried installing, about a week ago, my computer totally froze in the middle of the install and I had to force restart.

Any ideas on how to fix this problem?

A:DirectX install error - An internal system error occurred.

Welcome to Seven Forums callumshell1. The 1st thing I would suggest would be to run the System Files Checker.

SFC /SCANNOW Command - System File Checker

See if it finds and corrects any errors. Also, see if you locate the 2 dx logs mentioned, in the windows directory, and post them here, or just the text if they are short, which they may well be.

A Guy

Read other 6 answers
RELEVANCY SCORE 66.8

While trying to start up my Dell laptop with Vista Home Basic installed on it, I got an error saying that the winload.exe is missing. I ran the bcdedit commands to set the osdevice and device partitions. While trying to boot again, got an error again this time saying that Kernel is missing or corrupt. I tried to run a repair using the Vista installation cd but the repair failed midway. I tried to do a clean reinstall on the machine which completed successfully. But when I tried to boot the machine again, it gave an error 0xc00000e9 unexpected error has occurred with no other options. Running repair and reinstallation again did not work. I see that a lot of people have faced this problem but I could not find any solution which would work for me. Any clue about how to solve this and what is the cause of this problem? It has been really frustrating till now

A:Vista error while booting: 0xc00000e9 unexpected error has occurred

Hello IamThe,
If the E9 code is correct, then this is the bugcheck for your error.

STOP 0x000000E9: ACTIVE_EX_WORKER_THREAD_TERMINATION

Usual causes: Device driver

As you can see, the most probable cause is a driver.

Have you tried to boot into safe mode ?.
If you can get to safe mode with networking, go to C > Windows > Minidump and upload the files. You may need to save them to desktop before you zip them up and upload them.

Take a look and post your results, good luck.

Read other 6 answers
RELEVANCY SCORE 66.8

i just installed google chrome from online installer and then i moved the file using application mover to the HDD.. then i pasted a symlink in "C:\Program Files (x86)\" ... "C:\" is the SSD where the windows and the drivers are installed.... when i turn on chrome everything works file.. but the updater doesn't work... when i try to update i get this:



can anyone help me get that fixed.. thanks!

A:Update failed (error: 3)An error occurred while checking for updates:

Just uninstall Chrome then install it directly to the destination you want it installed instead of moving it post installation.

Read other 3 answers
RELEVANCY SCORE 66

So it all started when i was trying to install Itunes and right before it was done installing i got this error "An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32,publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86". Please refer to Help and Support for more information. HRESULT: 0x800736b" . So i do some research and learn that i need a newer version of microsoft visual c++ 2005. I try install that and i get this 'Error 1935. An error occurred during the installation of assembly.
Microsoft.VC80.ATL.type="win32".version="8.050727.4053"."publicKeyToken"="1fc8b3b9a1e18e3b".processorArchitecture="X86"

Ive also noticed some other strange things such as my windows module installer says started and i cant stop it so i think theres something wrong with that and everytime i put in sfc/scannnow it says windows resource protection could not preform the following operation. My windows updates also dont work i get code 80073712.

Please help me I have some skills on the computer but they are somewhat limited but im sure i can follow the instructions.

A:error 1935 an error occurred during the installation of assembly

some one please help?

Read other 18 answers
RELEVANCY SCORE 66

Hi,I just started my computer up for the first time and a keep getting a bright red screen with an error saying: "Red Screen!!! - Factory Processing Error Occurred error" It says to restart the computer but it just keeps happening!I bought this computer to be able to work from home on Tuesday so I urgently need this resolved!Thanks!

Read other answers
RELEVANCY SCORE 66

Hello,

I recently switched out an older Netgear router for the Netgear WNDR3300. I have a 1TB WD MyBookWorld connected via ethernet to the router. Ever since the router switch I have been having two specifice issues:While uploading videos to Facebook, the video will upload anywhere from several MB up to over 100 MB, then stall, saying it's still uploading but trust me, it isn't.
I can copy files/folders from the networked hard drive to my computer flawlessly, but when I try to copy files/folders from my computer to the networked hard drive, it copies anywhere from a few seconds to maybe a couple minutes then stalls out, giving the error message:
"Network Error. There was a problem accessing [\\SERVER\FOLDER]... Make sure you are connected to the network and try again." with Retry, Skip and Cancel. When cancel is pressed it gives: "An unexpected error is keeping you from copying the file. If you continue to receive this error, you can use the error code to search for help with this problem. Error 0x8007003B: An unexpected network error occurred.

Other useful information: on the new router, the WNDR3300, if I use WEP security, I can copy files/folders to the hard drive, no problem. However if I try to use WPA/WPA2, the abovementioned problems occur. I would use WEP and just forget the hassle, but WPA2 is much faster and more secure, so I really want to get this fixed.

I also believe the two problems are somehow related, considering they both involve... Read more

A:Error 0x8007003B: An unexpected network error occurred

Hmmmm, Tough Problem.

One of the things it could be is a loose connection, and it keeps on dropping out. Try checking all of your Patch (Ethernet) Cables and reconnecting them all.

As you can copy the files on WEP, it seems like windows is preventing a so called 'Hacker' (You) from copying a 'Virus' (Files) onto the HD. Try to edit the security settings yourself, edit the sharing options in the HD's properties and that might fix it...

Sorry about the long wait.

Read other 4 answers
RELEVANCY SCORE 66

Hello
I have been receiving this error message for the last two weeks while trying to transfer files from a network drive into my laptop. I have a 3TB WD My Book Live connected to my home network through a netgear DGN2000 router. I also use it to stream videos
to a smart tv.
I didn't have any problem ever since I connected it the first time. However, it has started showing up this error message now. I can't copy or move files either way. I tried a number of options, such as reset my router, shut down and reconnected the network
drive but none seem to have worked now. Now, I can't stream videos. Also, I am not able to upgrade the firmware of the network drive.
Any help please.
Thanks

A:Error 0x8007003B: An unexpected network error occurred.

Hi,
Do you have some anti-virus software installed and set to scan network drive, temporarily disable it, check if that is the cause.
I also suggest you update the firmware of your router.
Please alos share more information in event viewer with us as mentioned by ZigZag31343x

Meanwhile you can contact the support of My Book Live
http://wdc.com/en/products/products.aspx?id=280
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.

Regards


Yolanda
TechNet Community Support

Read other 3 answers
RELEVANCY SCORE 66

I work in one academic institute and been used to using teams for a while....Mac version.
I've been invited to work collaboratively with colleagues from another institute that having just started using teams.
I've received various invites, logged initially and its asks permissions for that uni to be able to access my uni account info (fine) but when it gets as far as open up teams (either online or via the Mac app) I end up with the above error message above.
This is my first use of inter-institutional work using teams.
Any ideas please?
Thanks
Kevin

Read other answers
RELEVANCY SCORE 66

Hi,
i got this error on a win 8.1 pro after a total transfered amount of ~41 MB :
Error 0x8007003B: An unexpected network error occurred.

- connection via sslvpn using a ntfs share on a dfs in a Domain network as letter-mapped share via gpo.


If i use map networkfolder without a letter, it will work fine also with large files with more than 80 MBThe symantec endpoint protection was turned of! Same error...

Read other answers
RELEVANCY SCORE 65.6

Hi All,

I am using Windows 7 ultimate sp1. I had to reinstall my Windows 7 with again ultimate sp1. After the reinstallation, I'm unable to open the encrypted files, please read to help if you know this, any help will be appreciated)

I think I've tested the file encryption(I mean just normally by going to the file properties>general>advance>Checked the encrypt contents to secure data [that's all I did]) & forgot to stop this encryption in my past w7.

I can remember whenever I was creating a new file(s) like notepad, pdf, word or folder etc in past version of window 7 these are encrypted by default as it's color auto change to green color.

I was not aware of this thing at that time but now I'm suffering which files shown in green color these are encrypted and I'm unable to do any modification or moving file to another place.



When I clicking on any files(ex: notepad) it showing Access is denied in a small popup window.Click to expand...

Taken ownership of the files By visiting the file>properties>security>advance>owner>Edit>Select to Admin>Apply>ok, now I'm the owner but still showing "Access is denied". Too sad.

When I checked the files>properties>Details>Attributes -> AE, Non-encrypted file attribute comes as A.

I don't have any encryption key/certificate. I just have only encrypted files. When I had a test for encryption on past os, I've not created ... Read more

Read other answers
RELEVANCY SCORE 64.4

Ok - I'm trying to fix my friends' computer - Toshiba Satellite L455-S5975 running Windows 7 32-bit

Windows firewall is off and I need to "Update Firewall Settings". When I click use recommended settings, I get a message that says it "can't change some of your settings. Error code 0x80070424" I get the same thing when I click on "Turn Windows Firewall on or off" and "Restore Defaults"

When I click on "Advanced Settings" I get "There was an error opening the Windows Firewall with Advanced Security snap-in" followed by it "failed to load. Restart the Windows Firewall service on the computer you are managing. Error code 0x6D9."

I scanned the computer using both Avast and Microsoft Safety Scanner (full scan and took over 2 hours) - no infections or issues found

I installed all Microsoft updates and followed suggested restarts.

I ran Microsoft Fix It and I get a message that the firewall isn't running or stopped and it can't be fixed.

I have gone into services as an administrator to try and start Windows Firewall...it isn't there - not in the list of services (local)

I also used SlimDrivers to update all the drivers on the computer.

What I am not seeing is how to uninstall and reinstall Windows Firewall...any other program or hardware issue, that would seem to be the easiest solution - but I have yet to see how to do that with Windows Firewall.

I even started the computer in safe mode... Read more

A:Win7 Firewall won't turn on error code 0x6D9 and error code 0x80070424

What other Anti-virus was on the computer before Avast?

Read other 3 answers
RELEVANCY SCORE 64

Symptom:
The URL of a shared folder on the LAN,  copied into Windows Explorer address bar produces the Network Error in the above title.
Network Error: WIndows cannot access
\\server.LAN.com\MySharedFolder   Error Code: 0x8004005 - Unspecified error.
But from a Dos terminal, Windows Explorer can open the same location just fine.  From DOS terminal:
start

Read other answers
RELEVANCY SCORE 63.6

Computer model: Panasonic Toughbook CF-31
OS: Windows 7 SP1
Processor: Intel Core i5-2540M CPU @ 2.60GHz 2.60GHz
RAM: 4 GB (3.89 GB usable)
System type: 64-bit

CBS Log
CBS.zip - Google Drive

I ran the SURT tool Windows6.1-KB947821-v34-x64.msu.
Ran fine, no problem.

Ran sfc /scannow
"Verification 100%"
"Windows Resource Protection could not perform the requested operation."

Also ran
Malwarebytes
JRT.exe
Adwcleaner
Hitmanpro_x64

I still get the "Windows Update Error, Error Code 80070643, Code 9C57"

A:Windows Update Error, Error Code 80070643, Code 9C57

Hi Qpuser,
lookin at your logs
couple of questions
Are you dual booting or have the OS on your D drive/partition.
can you also run, in following order

http://www.sysnative.com/niemiro/apps/SFCFix.exe
http://go.microsoft.com/fwlink/?LinkID=52012
and sfc /scannow

copy/paste the results please.

Roy

Read other 1 answers
RELEVANCY SCORE 62.4

Question 



Applies to 

Windows Windows 7 Security, privacy, & accounts Security and privacy

15 views
Windows 7 Ultimate- error regarding allowing Log in as Service "An unexpected error has occurred, Failed to save Local Policy Database"



TA

TageAndersson asked on <button aria-label="Date" class="msaActionText msgHistoryBtn info-panel-toggle-link"
data-panelcontainer=".userInfo" data-paneltarget="#message-history-holder-4326ef11-7243-4aff-947a-6bf7ef764212" style="color:#006cd8;font-style:inherit;font-variant:inherit;font-weight:inherit;font-size:inherit;line-height:inherit;font-family:inherit;margin:0px;cursor:pointer;padding:0px;border:none;display:inline;"
title="See post history">April 7, 2016</button>


During a long period, I'm  doing a huge jobs to take back ownership for files, as attributes (write protected) atrib. My database for network policy setting, secedit.sdb have problem, corrupted(?). So to check my database, I went to CMD as
administrator. From CMD I run:
esentutl /g %windir%\security\database\secedit.sdb

Result:
C:\Windows\system32>esentutl /g %windir%\security\database\secedit.sdb
 
Extensible Storage Engine Utilities for Microsoft(R) Windows(R)
Version 6.1
Copyright (C) Microsoft Corporation. All Rights Reserved.
 
Error: Access to source database 'C:\Windows\security\database\... Read more

Read other answers
RELEVANCY SCORE 62.4

I had videos on my pc which were in quicktime. I thought I would make a DVD so I was using slideshow assistant (Roxio), and it was giving me some error saying it could not support and I may have to install additional software.... something like that. Anyways, I go back to the folder with the video in it, and thought maybe I needed to "open with" a different program, so I selected "roxio". Then next time I opened the slide assistant and 'add movie', I got an error message saying "Error - 36: an I/O error occurred". Also, the other videos in the same folder, I could still see the beginning of the video in thumbnails, but this video I wanted was crossed out like when you see a no smoking sign and the red circle with the line across it. OMG, did I lose my video? I knew I had the video on my flash drive too but when I tried to open it from that device, I got the same error! Could someone please help me?????
 

A:QuickTime - Error 36: an I/O error occurred

When you choose "open with" there is normally a check box for "always use this program". Do you recall if you unchecked it?

Have you gone back through and changed the "open with" back to quicktime?
 

Read other 2 answers
RELEVANCY SCORE 62.4

an error occurred msg appear when i try to make any changes. and engine is listed as source

Read other answers
RELEVANCY SCORE 62.4

I am currently on Windows Vista Home Premium 32 bit and I have bought and downloaded Windows 7 Pro 64 bit.

I have used the upgrade adviser and it says:

Information about upgrading to 64-bit Windows 7
System Details
Custom installation required You'll need to perform a custom installation of 64-bit Windows 7 and then reinstall your programs. Make sure to back up your files before you begin.
Go online to get important information about custom installation
Windows Mail and Parental Controls (Web Filtering) These features are no longer included in Windows 7. You can get similar programs for Windows 7 from other software manufacturers.
Go to the Microsoft website to learn more
More info from Dell Inc. Dell Inc. has a website that might give you more information about getting Windows 7 running on your PC.
Visit the Dell Inc. website
Windows Aero support Your graphics adapter supports the Windows Aero user interface.
Go online to learn more about Windows Aero
CPU speed: 2.7 GHz Your CPU meets the 1 GHz minimum requirement.
3.3 GB of RAM Your PC meets the 2 GB minimum requirement.
149.8 GB free space available on C: Your hard disk meets the minimum requirement of 20 GB free space for 64-bit Windows 7.

Now wants I start installing it fills up the green bar and then when there's just a bit left to go I get the error message:

An error has occurred. Unspecified error

Anyone got any idea of what's going on?

A:An error has occurred. Unspecified error

Upgrade version only works on 32 bit to 32 bit and 64 bit to 64 bit

Read other 4 answers
RELEVANCY SCORE 62

Hello,
I have a Dell Latitude E7450 with Windows 10. I am unable to get to the login screen as the following error message comes up "A disk read error occurred Pres Ctl+Alt+Del to restart" I do this and get the same error message each time. I did hold F12 so I can get to the boot options. I ran the diagnostics and it completed with no issues found. "All tests passed"
Any ideas of how I can fix this issue?
Boot mode is set to Legacy. Should I change it to Secure Boot?
Any help would be greatly appreciated.
Thanks.

A:Latitude E7450 - Error message "A disk read error occurred"

Run the extended - not just quick - diagnostic on the hard drive (F12 at powerup).  
No, you cannot change to UEFI/Secure Boot without a complete reload of the operating system.

Read other 1 answers
RELEVANCY SCORE 62

Hello
For the last couple of days i have been getting this error on Google Crome and IE. I cant connect to anything like online games. messengers. Firefox works fine. Plz Help

OS Vista

here is the error that it says when i try crome or ie
Network Error (tcp_error)

A communication error occurred: "Connection refused" The Web Server may be down, too busy, or experiencing other problems preventing it from responding to requests. You may wish to try again at a later time.
For assistance, contact your network support team. ​
 

A:Network Error (tcp_error) A communication error occurred: "Connection refused"

i have no idea what to do.. ive tried resetting my firewall.. resetting browers. i cant even update anything.
 

Read other 1 answers
RELEVANCY SCORE 62

Hi All,
I'm new here and I think I messed up the post that I made. I had meant to say that all of a sudden I can't use windows installer service I get error code 8007641 or error code 641. I'm unsure why I'm not able to use windows installer anymore and I'm not able to get valuable updates from windows without it. Has anyone else ever had this problem and if so, were they able to come up with a solution? Thank you. This is my first day on the site and unsure how to get around on it, but it seems like it's an exciting site and I'm looking forward to using it.
Thanks,
Miket797

A:Windows Installer, Error Code 8007641 or error code 641

DownloadmsiserverLaunch it,click YESRestart the PC and try to updateIf you still have issuesDownloadmini toolboxCheckmark following boxes: List last 10 Event Viewer log List Installed ProgramsClick Go and post the result.

Read other 2 answers
RELEVANCY SCORE 62

No-one replied to this post and so the problem was never fixed.
(The updates continued to fail downloading or installing)
I upgraded to Windows 10 Home and thankfully didn't need to have the updates installed to upgrade.

Back in April this year I downloaded two important updates:

1) Security Update for Microsoft .NET Framework 4.5.1 and 4.5.2 on Windows 8.1 and Windows Server 2012 R2 x64-based Systems (KB3023222)

2) Security Update for Microsoft .NET Framework 4.5.1 and 4.5.2 on Windows 8.1 and Windows Server 2012 R2 x64-based Systems (KB3032663)

However during the installation I encountered Error Code: 80073712
I tryed the installation again without anything else open and still the same result
I tryed the installation again having restarted and still the same result
I tryed the installation again after running the DISM Tool and still the same result

Yesterday (17/7/15) I tryed to download another important update:

1) Security Update for Windows 8.1 for x64-based Systems (KB3004365)

However during the download I encountered Error Code: 800F081F
I tryed everything that I tryed previously and still the same result

I searched around and both of these error codes apparently mean that a file needed by Windows Update is either damaged or missing

I thought I might as-well start a thread about it on these forums as not being able to download/install security updates isn't a good thing

Please Reply!

Read other answers
RELEVANCY SCORE 62

This is a desktop PC with Windows 7 Ultimate 64 bit installed. I'm trying to repair with the disk it was installed with originally. The reason for attempting the repair is that the System File Checker says there are files that it could not repair when I ran it. I ran it originally because I couldn't install or uninstall anything. I would get an error: This application was unable to start correctly. With error message (0xC0000006)

Now trying to repair Windows 7 with the upgrade option I get:
Windows was unable to create a required installation folder. Please reconfigure your boot.wim to use the flag 9 settings for the first image and restart your installation. Error Code: 0x803002f

Any help greatly appreciated....

A:Started with error code 0xC0000006 and now I have Error Code: 0x803002

You may need to attempt SFC up to 3 times to repair damaged System Files. But first disinfect per Troubleshooting Steps for Windows 7. If there is any problem go with the bootable scans in Troubleshooting Windows 7 Failure to Start as the OS may be in the death grip of infection.

Then SFC may run better from the Win7 installation media or System Repair Disk Command Line: SFC /SCANNOW Run in Command Prompt at Boot.

If these fail then you can try the Repair Install after establishing a Clean Boot per Troubleshooting Steps for Windows 7.

But you may be better off copying out your files to quarantine to follow these same steps for a perfect Clean Reinstall - Factory OEM Windows 7 which compiles everything that works best in tens of thousands of installs we've helped with here.

Read other 1 answers
RELEVANCY SCORE 62

Boot configuration data file is missing some required informationFile   BCDError Code oxc000000d Any fixes for this? Computer wont start up. Worked fine this morning. Got this message this afternoon.










Solved!
Go to Solution.

A:Error code oxc000000d acer aspire R14 error code o...

First of all try to check if ALT+F10 at boot take you to windows recovery and you can reach command prompt from there:troubleshoot-advanced options- command prompt (if this works, go to point 4, if not point 1)1. create a vanilla Windows 8.1 installation media from this link:http://windows.microsoft.com/en-us/windows-8/create-reset-refresh-media2. Once you boot using the Windows installation disc, on the Windows 8.x installation window, click on Repair your computer.3. Click on Troubleshoot and in the Advanced options. First thing you may try is the Automatic Repair.4. If that does not help, then select Command Prompt. Enter the following four commands into the prompt.bootrec /fixmbrbootrec /fixbootbootrec /scanosbootrec /rebuildbcdOnce the command completes, restart the computer.

Read other 3 answers
RELEVANCY SCORE 61.2

I have another user setup with standard settings and want to set them up to be able to play Civ IV without me the admin having to enter the password everytime they want to play it.

It's in C:\Games\Civ IV, so I've tried changing the permissions of users\ to modify and write enabled. However I get the 'error applying security' message with no prompts as to how to solve the probem!

Any help would be grateful.

The interesting thing is it applies the changes anyway, even though it tells me I'm not allowed - security flaw!

A:error applying security

  
Quote: Originally Posted by Okran


I have another user setup with standard settings and want to set them up to be able to play Civ IV without me the admin having to enter the password everytime they want to play it.

It's in C:\Games\Civ IV, so I've tried changing the permissions of users\ to modify and write enabled. However I get the 'error applying security' message with no prompts as to how to solve the probem!

Any help would be grateful.

The interesting thing is it applies the changes anyway, even though it tells me I'm not allowed - security flaw!



Hi okran and welcome
Why dont you just crate a shortcut for it and give it run as admin privledges?
Ken J+

Read other 5 answers
RELEVANCY SCORE 61.2

I am trying to deploy an image using ImageX and I got an error below,
[0%] Applying Progress
[Error] D:\users\Administrator\AppData\Local\Microsoft\Windows\temporary internet files\Content.IE5 <Error =3>
Error restoring image
the system cannot find the path specified.
I am deploying an image to a single PC with USB external disk drive where the image is stored. This is not over the network.
This is a good known image that has been used in the past and the path is correct! What's the solution? thanks.



Thang Mo

Read other answers
RELEVANCY SCORE 61.2

I get this error when I try to take full control over a directory
Error Applying Security

An error occurred while applying security information to:

D:\path\name

Access is denied.

can anyone please help me, cause I need to do this fro Photoshop Cs4 to work. please and thank u

A:Error applying security!!!!!!!!

D:
Properties
Security
Owner
Select your account
apply

Read other 9 answers
RELEVANCY SCORE 61.2

I had had ati tv wonder pro and installed it a few weeks ago and it seemed to work fine. Just recently i decided to update the drivers for it(including the remote control drivers) When i ran the updates it gave me some error about being unable to delete a file and said that it couldn,t remove the old version of the drivers.
I tried to remove the them the old fashioned way by just deleting the files and it kept saying they were in use, even after rebooting. Using Moveonboot, i was able to delete the remote drivers.
Now when i try to install the updates it says "Error applying transforms. Verify that the specified transform paths are valid.
F:/Install/Remote/1033.MSTRu
It even says this when I try to install it from the CD itself.
Trying the add/remove programs option gives me the same error.
Any help on the matter would be appriciated, thanks.
 

A:Error applying transforms?

run
sfc /scannow
and see if you deleted any windows files
check the readme file in the update drivers and see if there are any special instructions to install
 

Read other 1 answers