Over 1 million tech questions and answers.

Failed Install KB2965788 - Important Update

Q: Failed Install KB2965788 - Important Update

I was doing a clean install and during the updates, I had one, KB2965788, that failed to install and hasn't reappeared for a second attempt.

I'm running Win 7 Pro x64. The error code is WindowsUpdate_80070308.

I'm not sure if this update is required for my system configuration or if there is some issue that needs to be detected and resolved.

Does anyone have any suggestions?

Regards

RELEVANCY SCORE 200
Preferred Solution: Failed Install KB2965788 - Important Update

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Failed Install KB2965788 - Important Update

My understanding that some system may require this KB and some don't.
My system do not have KB2965788 installed.

Read other 2 answers
RELEVANCY SCORE 85.6

I set up two brand new computers one Dell and one Toshiba laptop and both computers failed kb2984981, kb2965788 and kb2861208. Is it possible that these updates have been replaced with newer ones? I did factory restore the dell and I still generate these 3 failed updates. Hope to hear from someone! cheers!

A:Fresh Install kb2984981, kb2965788, kb2861208 failed

Hi van2489
May I ask you how the update fail exactly? Does the Windows Update control panel returns an error code? If so, what is it? Or does the updates install, you restart your computer then the installation hangs and it displays "Reverting changes"?

Read other 17 answers
RELEVANCY SCORE 68.8

Anyone else receive this as an important update and had problems with it as well? I just hid it for now. KB3000850 Thanks!

A:KB3000850 important update failed?

It is known to have problems so I have still not installed it yet.
Some had no problems but others did.
I am going to save an image of my laptop then try, when I have the time.

Read other 3 answers
RELEVANCY SCORE 68.8

Hello Forum,

One of my Windows updates (one of nine) failed earlier, but when I opened up my Update window again to see if I could retry, it doesn't give you the option to do it (first time in five years with this computer it has happened - ALL my updates have been successful). It shows the failed update in the Update History, but does not give you the option to install it again. How can I try to install that update again even though I can't locate the option to do it? Thank you.

A:One Important Windows Update Failed

There is usually a download from Microsoft's website.

Read other 5 answers
RELEVANCY SCORE 68

Failed microsoft upde kb3172729 important!I hear that in some computers it doesn't download.I know its microsoft hardware but is it possible it might be an hp problem?

A:failed microsoft update kb3172729 important!

Hi: I highly doubt is a problem specific to HP. Did you try the standalone installer?  If not, you may want to. http://www.microsoft.com/en-us/download/details.aspx?id=53459

Read other 1 answers
RELEVANCY SCORE 66.8

Hi, im out of ideas please help. I cant update KB2984981 and KB2965788. Tried FixIT, renaming Softwaredistrubition folder and i dont have that regedit entry. But nothing works. I also tried to install these manually but it just says my system cant install them.

Update: followed intructions on Windows Update Posting Instructions post.

step 1. SURT installed KB947821. Reran Windows update but with no success, it doesnt find the old failed updates above.

step 2. sfc fixes something but stills says after multiple runs that unable to fix all of them.

step 3. error codes both above is: Code 80070308

CBS logs and windowsupdate logs attached.

A:Cant update KB2984981 and KB2965788

Just a snippet of my update history

Read other 4 answers
RELEVANCY SCORE 65.6

Hi when running windows update all the updates fail and give the error code 800706F7. I have retried 3 times all to the same result. i have searched for this error code and the only results i found was about removing a previous 2014 update but this was not on my computer. i have ran the System Update Readiness Tool which installed 1 update however i can still not download the other updates

A:windows update error code 800706F7 54 important updates failed

Tried again and am now also getting error codes 80246007 and 8007002

Read other 9 answers
RELEVANCY SCORE 62.4

Hi there. Please see the attached. I have been unable to instlal this Windows Security Update for some time. My computer always shows that it is available install when I want to shut down my computer, but no such luck.
I don't know why it wont let me. I don't even know if I have Office Power Point.
Any help would be much appreciated.
Thanks.
 

A:Cannot Install 'Important' Security Update

I have no idea what may be causing your problem, but you could try getting the update from the Windows Catalog site and see what happens; http://support.microsoft.com/kb/323166/en-us

If this works, you will be able to download an .exe file which you just doubleclick on to install. Be sure to read the instructions before using this method.

Alternatively, you could check your Add/Remove list first, just in case the update is already there, or you could run the Secunia Online Inspector, which will confirm whether or not the patch is missing. You will need an up to date version of Sun Java before the Inspector will run; http://secunia.com/vulnerability_scanning/online/
 

Read other 1 answers
RELEVANCY SCORE 62.4

I am having difficulty installing Microsoft .NET Framework 4.5.2 for Windows 7 x64-based Systems (KB2901983)

Download size: 52.4 MB

You may need to restart your computer for this update to take effect.

Update type: Recommended

The Microsoft .NET Framework 4.5.2 is a highly compatible, in-place update to the .NET Framework 4, 4.5 and 4.5.1. By using the .NET Framework 4.5.2 together with the C# or Visual Basic programming languages, you can write Windows Store apps. The .NET Framework
4.5.2 delivers better performance, reliability, and security than previous versions. After you install this update, you may have to restart your computer.

More information: 
http://support.microsoft.com/kb/2901983

Help and Support: 
http://support.microsoft.com

A:Unable to install important update

Hi,
Is there any error message when this update installed failed? Is this failure occurs after system restart? Please try to boot into Safe Mode to install the update for test.Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Read other 4 answers
RELEVANCY SCORE 62.4

My PC has told me that there's an important Windows 7 update to install, but whenever I try, I'm told that the installation has failed.

Attached is the pop up I get with the details of the failure.

Any ideas how I can remedy the error? Thanks.

A:Can't install Important Windows Update

Hi try running sfc /scannow How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7

Read other 6 answers
RELEVANCY SCORE 61.6

Would it hurt not to install an important update if the program is not used?

I do not use anything "Live", but have it installed.

Does this leave me vulnerable if I don't?
Used as reference:
Windows Live Essentials 2011 (KB2434419)

A:Would it hurt not to install an important update if the program is...

No, it won't hurt anything. I don't use IE, so I don't install any of the "Important security updates"

Read other 9 answers
RELEVANCY SCORE 60.4

Hey All,

There seems to be an issue with MS latest security update for IE 11 on Windows 7. For MANY, not just me. All the other updates installed fine, last "patch Tuesday" but this one did not go through the automatic update process. Others are having the same issue. If you read here, it seems to be more of an "optional update." but MS did not push it through automatic updates on last Tuesday's patches. See here:

http://www.landzdown.com/security-a...ID=0c64b9d53ca25bbe63526e3968971320#msg165985

What's going on? Is this patch expected to go through at a later time, moved to optional, or what? I thought that ALL Windows Updates classified as important as long as Automatic Windows Update was turned on, went through?

Jack
 

A:Update for IE 11 KB-2929437 (April 8) Marked as Important- does not auto install?

That's the cumulative update that updates IE from 11.0.4 to 11.0.7.

I've got 4 computers with Windows 7 and IE11, and the update installed fine in all of them.
 

Read other 3 answers
RELEVANCY SCORE 56.8

Hi, Lenovo Vantage fails to retry install "ThinkPad Hotkey Features Integration Package Setup". Below is the screenshot of the error.  Can anyone help? Thank you.

Read other answers
RELEVANCY SCORE 56.4

Hi guys.
i just install new windows on my laptop but there are some problem according to windows update.
its keep searching update for a long time and only update a few of them. The others failed..

here i provide my scenario installing:

1. my disk partition are GPT at first.
2. successful install windows 7
3. activate using Re-loader (failed-loader doesn't support GPT partition)
4. convert my partition to MBR - activate windows successful
5. install all software that i need for study.
6. when installing WAMP there are problem occur.
7.
8. search the solution on GOOGLE. then its say that i need to update windows and install latest vcredist.
vcredist - updated
windows update - Unsuccessful

thanks for any help.




Code:
Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->

Validation Code: 0
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-Q6MMK-KYK6X-VKM6G
Windows Product Key Hash: 289NoAWl2ZoVfuieux/315WkDIc=
Windows Product ID: 00426-OEM-8992662-00173
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7601.2.00010100.1.0.001
ID: {555FA4F8-4018-4781-AF89-69A92794EF3A}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Ultimate
Architecture: 0x00000009
Build lab: 7601.win7sp1_rtm.101119-1850
TTS Error:
Validation Diagnostic:... Read more

Read other answers
RELEVANCY SCORE 55.6

Hi guys,

I'm wondering why this security patch for a zero day flaw in IE 11 is not checked by default? Surely it should be.

A:KB2964358 Important update (but not that important)

Don't know why.
I usually manually check one or right click on one & hide it.
I hide all bing desktop updates.

Read other 4 answers
RELEVANCY SCORE 54.8

Hi,

I have a Windows 7 x64 machine that is permanently stuck trying to install the same update.
I have followed various posts off of MS websites to rename SoftareDistribution etc. but none have helped.
HAve tried
1. Boot intoClean Boot Mode and try updating again.
2. Run the Microsoft Fixit and see how it works.
  

   
How do I reset Windows Update components?

3. Try System Update Readiness tool by referring toWhat is the System Update Readiness Tool?.
4. Run
System File Checker tool and see how it works.

The WindowsUpdateClient log posts the error 0x80070bc9

CBS log has the following:
2012-09-22 15:09:44, Info                  CBS    Session: 30251211_3937697323 initialized by client WindowsUpdateAgent.
2012-09-22 15:10:49, Info                  CBS    Session: 30251212_293967167 initialized by client WindowsUpdateAgent.
2012-09-22 15:10:49, Info                  CBS    Appl: detect Parent, Package: WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256, Parent: Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.0.6000.16386,
Disposition = Detect, VersionComp: EQ, ServiceComp: GE, BuildComp: GE, Distribut... Read more

A:Windows Update loops with a "Restart your computer to install important updates"

Thanks Alex
I had already tried the steps in the post you linked.
In the end I have had to reinstall Windows 7 over the top (keeping all settings) and this has fixed the issue with Windows Updates.
It is frustrating that I could not find a solution as I do not like glossing over the issues without first finding a solution but unfortunately it was not my pc and time was against me.
Thanks for all the replies.
Simon

Read other 9 answers
RELEVANCY SCORE 54.4

Hi all,

Everyday since last Wednesday, Win10 has been trying to install this:

Cumulative Update for Windows 10 Version 1511 for x64-based Systems (KB3140768).

Everyday is asks me many times a day to restart my computer to install.......and everyday it tells me many times a day installation has failed. How do I get this annoying update to install - I dislike Win10 at best with nanny protocols.

Any ideas

Read other answers
RELEVANCY SCORE 54.4

Hi to all I was doing my usual MS Tuesday Security Updates after having been off air for a fort-nite. I had a heap of them" they all Installed fine, except' this one from the Error Box:Automatic MS Update wont install .NETframework I.1 SP1 on Widows XP (KLB2698023)Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista, and Windows Server 2008 x86 (KB2698023) I have tried everything and 8 times to install it and it will not install. Can you help please Cheers Dazza

A:Failed MS Update will not install

First visit the Microsoft Direct Download SiteFollow this option > To save the download to your computer for installation at a later time, click Save. Select desktop so you can find it -After you have saved it to your computer, then try to install it -Run this Fix It >> http://go.microsoft.com/?linkid=9767096 and retry the update install -Still have problems, then I have a batch file you can run as a last option, but not if this your only problem -

Read other 4 answers
RELEVANCY SCORE 54.4

i have 2 updates from HP Support Assistant. One is Intel Wireless Display 6.0.60.0Ap1 and the other is is BIOS update. Woundering how the solve the problem

A:Update failed to install

 Hi @rrj2005, Thank you for visiting the HP Forums!  I see you are having issues with the updates from the HP Support Assistant and your HP ENVY Notebook. For the Wireless adapter, I would go to the Device Manager and right click on the Wireless and select update driver and software.  With the BIOS, if all is working well I would not do it. Just ignore both.  If need be I would uninstall the Support Assistant. Restart the Notebook. Here is a link to the HP Support Assistant if you need the download. Please let me know how this goes.You can say thanks for trying to help by clicking the Thumbs Up below! Thanks.

Read other 1 answers
RELEVANCY SCORE 54.4

Update for Windows 10 Version 1511 for x64-based Systems (KB3122947) failed to install. I ran check for updates, it said my system was up to date.

Looking at update history, there are only 2 updates listed, where are all the other updates?

Windows 10 update system sucks, give me the old manual update system.

A:Update failed to install

Go to this thread and fast forward to Reply #95 and #96.
You have the answer which almost every one said it worked.
http://www.tenforums.com/windows-10-...se-get-10.html
If you have question on the answer, please ask in that thread.

Good lick.

Read other 1 answers
RELEVANCY SCORE 54.4

Why will Servicepack Vista ultime not install?? Still not installing after several trys. Ive had other updates fail, but go in the next try.Duker

A:Failed update install

I assume you are speaking of Vista SP1?

Did it come to you via Windows Updates - or did you go to MS site and download it?

Read other 3 answers
RELEVANCY SCORE 54

My computer was downloading and installing automatic updates, all updates went fine except the KB917422, it was downloaded along with the others, but when it got to the install stage got the following error message:

Microsoft Visual C++ Runtime Library

Buffer overrun detected!

Program: ...86cafc583a58922d9f353b3a41cf\update\update.exe

A buffer overrun has been detected which has corrupted the program's internal state. The program cannot safely continue execution and must now be terminated.​
After that, the rest of the updates installed successfully. Can someone tell me what that was, and how do I get that update back?

Thanks!
 

A:Update KB917422 failed to install

Read other 16 answers
RELEVANCY SCORE 54

I was attempting to recover from several BSOD's by an Update Install. This caused an MRB corruption that I recovered from, but now windows restarts (no BSOD) 2 seconds after displaying the loading screen.

I have tried many things but this is where i'm at now:
sfc /scannow, says it has a pending update, but no CBS.txt log exists and I cannot get out of this loop.
No .dmp file is written. (I have OS set to full memory dump, but likely isn't starting the OS yet.)
Repair terminates with the following error. Unknown Bugcheck: Bugcheck f4. Parameters = 0x3, 0xfffffa800550eb30, 0xfffffa800550ee10, 0xfffff8000317a240.
The last error indicates a CRITICAL_OBJECT_TERMINATION of a process. Which likely means a repair system file is corrupted. But this should not happen when I use the repair console from the Windows 7 DVD and yet I get the same error.
Without a dump i'm unable to trace the crash, unless there is an alternate method to capturing a dump?

Here is some information about the computer.
I have a single HDD that multiboots separate partitions of XP (professional) on C: and Win 7 x64 (professional) on D:
XP loads and run perfectly.
I have done a Hard Disk check without errors.
I have done a memory check without errors.
I have done several virus, malware, and rootkit scans without results (6 separate programs)
All hardware appears to be functioning properly.

Last thing is I am not in any hurry to fix Windows 7, so I would prefer to keep the years worth of use and find a s... Read more

A:Failed Repair Update Install

bugcheck f4, parameters = 0x3, 0x8522d7b0, 0x8522d8fc, 0x82027650

Read other 1 answers
RELEVANCY SCORE 54

i got an update message from windows update to install the following:

Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update for .NET versions 2.0 through 3.5 (KB951847) x86

i went to the update site and downloaded from it directly (instead through the automatic update icon/feature)

it downloaded completely but failed on installation.

the error message was:
Suite Integration Toolkit Executable has encountered a problem and needs to close. We are sorry for the inconvenience.
i am uploading/attaching the error report file generated.

i tried this many times, and it failed to install even after restarts.

i have winXP SP2 with all windowXP updates except SP3.

i hope this info is sufficient for you to diagnose what went wrong - with my comp, or with me.
regards
biren

A:HELP! .NET Framework 3.5 update failed to install

FWIW: http://www.google.com/search?hl=en&q=S...mp;oq=&aqi=I guess that I have to ask...if the prompt came via WUS, why didn't you use it?IMO, it's possible you downloaded the wrong package...also possible that the download became corrupt/damaged.You might check Event Viewer for possible related documented errors, How To Use Event Viewer - http://www.bleepingcomputer.com/forums/t/40108/how-to-use-event-viewer/ Louis

Read other 4 answers
RELEVANCY SCORE 54

HiIm trying to install update KB3033929 on a Win 7 pc, but it keeps telling me that the following updates were not installed.

Any help would be greatful.

Thanks

Read other answers
RELEVANCY SCORE 54

Hey-

MS Office XP update KB921596 continues to fail to install on my Windows XP SP3 system with MS Office XP Standard with SP3. For 1.5 years now, this update continues to fail and there is little support at the MS Knowledge Base site. I have the most current version of the windows update software and all other updates are installed easily. I know that two of you have already dealt with this problem two years ago unfortunately, my system is configured differently. If you know of a fix, please advise. Thank you.
 

A:MS Office XP Update Failed To Install

First delete the folders
SOftware distribution and catroot2
from c:\windows\system32
and then
try to manually download and install the update

http://www.microsoft.com/downloads/...E6-23DA-45E5-9C2B-C47331D30E79&displaylang=en
 

Read other 2 answers
RELEVANCY SCORE 54

I've been all over looking for a solution to my update failures.  Everything was working fine til about a week ago. Now I have 2 Important and 1 Optional update failing.  I've tried MS Fix it, installing each manually and I've check to see if they were installed before.  The updates are as:
 
KB2973351
KB2984972
and the optional one KB2973337
 
My error codes are 80073712 and 800B0100.
 
x64 Windows 7
 
Any help or advice would be greatly appreciated.

A:Windows Update Failed To Install

Have you tried manually downloading/installing from Microsoft support site individually referring to the KB updates?
http://support.microsoft.com/kb/2973351

Read other 9 answers
RELEVANCY SCORE 54

Everytime I start the Internet the Automatic Updates notification bubble appears asking me to update my computer to include KB824105. I have done this about 10 times and installed the file yet each time it asks me again! How do I make it install properly?

Thanks.

t:A:R:q
 

A:Windows Update Failed Install

go to microsoft.com and download the file manuely it should install then. i have done this before for same reason.
 

Read other 3 answers
RELEVANCY SCORE 53.2

When I use the Windows Update or Microsift Update sites, I can get onto the page fine, and scan my computer to find needed updates.
When I select the updates I would like to download, and press the Install Updates button, it downloads all the updates fine.
The problem is the instalation. All updates, no matter what ones, even the latest Windows Genuine Advantage Validation Tool (KB892130) wont install.
I keep getting a messege telling me the instalation has failed, and it doesnt say anywhere why it could be doing this.

Any ideas?

A:Windows Update downloads keep getting 'Failed to Install'

possibly your anti virus program is interfering with the download

Read other 6 answers
RELEVANCY SCORE 53.2

January-2017 Security Monthly Quality Rollup (KB3212646), 1 update failed.
The errormessage only says that: "13 were installed and 1 failed".

But how do i find out which security update failed to install ???

Update History only lists "January-2017 Security Monthly Quality Rollup (KB3212646) update failed"
Installed Updates only lists those that were
succesfully installed, not the failed....

The whole update is 146 MB, so there is a lot of updates, not just from the last month.
So comparing the list of succesfully installed updates against the list of avilable updates from the last month is impossible....
The genius who came up the bright idea of putting all updates into one BIG cummulative update obviously did not think about what would happen if something goes wrong...
VERY CLEVER...

Read other answers
RELEVANCY SCORE 53.2

Hi all,

Running Win 7 Home Premium (SP1) 64 bit.
I always downloaded and installed the Windows updates for my computer without problems. However, a few days ago, after I downloaded and installed 14 updates, my Windows Explorer started to act very odd: for example, I was not able to copy / paste the files using right click. Immediately, I used the restore point created before the updates => the Windows Explorer issue was solved and the computer seemed to return to normal.
But now, although the Windows Update screen shows the 14 updates as downloaded, when I click on "Install", the green indicator goes left and right for hours, but the installation doesn't happen.
I looked for solution online and I tried the following resources without success:

- FixIt tool: it gets stuck in the "Checking for Updates" screen.

- Run Malwarebytes, Lavasoft, Spybot: all clear.

- http://answers.microsoft.com/en-us/windows/forum/window... => I tried to apply the "Most Helpful Reply" (by miluethi) =>
1. Run services.msc
2. Stop service Windows-Update
3. Delete folder content of C:\Windows\SoftwareDistribution\
4. Start service Windows-Update again
5. Run Windows Update
I was not able to Stop the Windows Update service (I got the 1053 error)

- Run registry cleanup.

- Tried all the processes disabling Norton.

I will appreciate any help.
Thank you in advance,

Marsh

A:I can't install Windows updates after failed update

As a quick start Marsh TURN OFF your computer fully.
what registry cleaner did you use .

Roy

Read other 9 answers
RELEVANCY SCORE 53.2

Hi friends,
This the first time am having an issues with the update center.
the rest of updates from today (Office 16) were fine.
Once again when am trying to install KB3124263 - am stuck at Getting Windows ready after performing Windows update.
the only way to get rid of it (after 30 min) is to press the RESET button.

Tried sfc /scannow => CBS.Log

......................
2016-01-16 12:41:37, Info CSI 00004f4f [SR] Verify complete
2016-01-16 12:41:37, Info CSI 00004f50 [SR] Repairing 1 components
2016-01-16 12:41:37, Info CSI 00004f51 [SR] Beginning Verify and Repair transaction
2016-01-16 12:41:37, Info CSI 00004f52 Hashes for file member \??\C:\WINDOWS\SysWOW64\opencl.dll do not match actual file [l:10]"opencl.dll" :
Found: {l:32 vWh+Aagi7wmt066CrcoQZCog+Hd1BxBdtaVBb60iWgk=} Expected: {l:32 9rnAnuwzPjMQA7sW63oNAVhckspIngsqJXKYSUeQ5Do=}
2016-01-16 12:41:37, Info CSI 00004f53 [SR] Repairing corrupted file [l:23 ml:24]"\??\C:\WINDOWS\SysWOW64"\[l:10]"opencl.dll" from store
2016-01-16 12:41:37, Info CSI [email protected]/1/16:10:41:37.522 Primitive installers committed for repair
2016-01-16 12:41:37, Info CSI 00004f55 [SR] Repair complete
2016-01-16 12:41:37, Info CSI 00004f56 [SR] Committing transaction
2016-01-16 12:41:37, Info CSI 00004f57 Creating NT transaction (se... Read more

A:KB3124263 - Cumulative Update Failed to Install

Hello

From the CBS log it looks as if the repair was to an opencl.dll file which is not related to a windows update but usually to do with graphics cards such as nVidia cards which change the opencl.dll file.

Have you still got problems trying to install KB3124263? Quite often these problems sort themselves out after a day or two.

Read other 0 answers
RELEVANCY SCORE 53.2

Windows Update  KB 2901983 failed to install. error code 643.  Consequently I am unable to install Adobe, Photoshop Elements 13. The problem is occurring on  Dell, Latitude notebook model E6400, Intel Core 2 Duo CPU, Windows 7 Ultimate, 32-bit.  How can I determine what's preventing the update from installing and correct the problem? 
 
 

Read other answers
RELEVANCY SCORE 53.2

Hi friends,
This the first time am having an issues with the update center.
the rest of updates from today (Office 16) were fine.
Once again when am trying to install KB3124263 - am stuck at Getting Windows ready after performing Windows update.
the only way to get rid of it (after 30 min) is to press the RESET button.

Tried sfc /scannow => CBS.Log

......................
2016-01-16 12:41:37, Info CSI 00004f4f [SR] Verify complete
2016-01-16 12:41:37, Info CSI 00004f50 [SR] Repairing 1 components
2016-01-16 12:41:37, Info CSI 00004f51 [SR] Beginning Verify and Repair transaction
2016-01-16 12:41:37, Info CSI 00004f52 Hashes for file member \??\C:\WINDOWS\SysWOW64\opencl.dll do not match actual file [l:10]"opencl.dll" :
Found: {l:32 vWh+Aagi7wmt066CrcoQZCog+Hd1BxBdtaVBb60iWgk=} Expected: {l:32 9rnAnuwzPjMQA7sW63oNAVhckspIngsqJXKYSUeQ5Do=}
2016-01-16 12:41:37, Info CSI 00004f53 [SR] Repairing corrupted file [l:23 ml:24]"\??\C:\WINDOWS\SysWOW64"\[l:10]"opencl.dll" from store
2016-01-16 12:41:37, Info CSI [email protected]/1/16:10:41:37.522 Primitive installers committed for repair
2016-01-16 12:41:37, Info CSI 00004f55 [SR] Repair complete
2016-01-16 12:41:37, Info CSI 00004f56 [SR] Committing transaction
2016-01-16 12:41:37, Info CSI 00004f57 Creating NT transaction (se... Read more

A:KB3124263 - Cumulative Update Failed to Install

Hello

From the CBS log it looks as if the repair was to an opencl.dll file which is not related to a windows update but usually to do with graphics cards such as nVidia cards which change the opencl.dll file.

Have you still got problems trying to install KB3124263? Quite often these problems sort themselves out after a day or two.

Read other answers
RELEVANCY SCORE 53.2

I normally check the status of Windows update every few days. This morning going to Control Panel ..... Windows Update I find everything normal. I check update history and find that a important update failed. So I did a check for pending updates. Still normal, no pending updates found.
That important update that failed really wasn't so IMPORTANT, I guess.
Anyhow, I wish to try to install it. Can't find how.
I didn't put this post in the Windows Update forum because I'm not ready to troubleshoot yet. Just want to find out how to install the failed update.

Bill

A:How to manually install a failed Windows update

Hi Bill,

Considering that they aren't letting you download it, it's probably not that important. I really don't think you can install this update, even manually!

-Chuck

Read other 5 answers
RELEVANCY SCORE 53.2

Windows update KB890830 failed to install several times.

Can anyone help with this please?

XP SP3
 

A:Windows update KB890830 failed to install

Try a direct download.

http://www.microsoft.com/en-us/download/malicious-software-removal-tool-details.aspx?id=16
 

Read other 4 answers
RELEVANCY SCORE 52.8

Hello, I've been have several issues with my laptop ever since I swapped over my faulty C drive by Ghosting it onto another HDD. My troubleshooters all fail to run when I try to start them and Windows Update will not work despite the fact that I've checked and re-checked that the service is running. I've run sfc twice now with reboots in between and I've tried to repair install windows 7 using the tutorial provided by this forum, but I keep running into errors while trying to fix the problem.

I do not want to run a clean install unless I absolutely have to, but repairing it doesn't seem to work. I have the CBS log and the error codes from the troubleshooters if you need them.

A:Windows 7 repair install failed; error when trying to run Update

Start by running a couple of Startup Repairs to make sure the boot files are in order.

Post back a screenshot of Disk Management - Post a Screen Capture Image - Windows 7 Help Forums.

Did the clone hold activation after cloning? Check at Computer>Properties activation link.

If these are okay, then let's move to addressing the UPdates. Try each of these tutorials:
reset Windows Update components
System Update Readiness Tool fixes Windows Update errors in Windows 7, Windows Vista, Windows Server 2008 R2, and Windows Server 2008
Windows Update - Reset - Windows 7 Forums

Report back the results of each of these steps.

Is this the original Asus factory preinstall with the bloatware and duplicate utilities that have better versions built into Win7? If so this is a corrupt install to begin with that smothers Win7 native performance. So I'd stronglly consider doing the superior Clean Reinstall - Factory OEM Windows 7 as you'd go from one of the worst possible installs to one of the best. Once you've done it you can preserve a backup image so you never have to do it again.

Read other 1 answers
RELEVANCY SCORE 52.8

Hello
I'm trying to install this update KB978637 and it always gives the 800B0100 error. I already installed the system readiness tool but I still have the same problem. Can anyone help out? I have on attachment the log files. It seems that some files are corrupted, but how do I replace them? This is a clean install of windows 7.
Cheers.

A:Update KB978637 failed to install - 800B0100 Error

Here is a bit sophisticated because you have coruupted not only in C:\Windows\Servicing\Packages but also in C:\Windows\WinSxS\Manifests

I attached to post corrupted files according to path they should be placed






Quote:
Unavailable repair files:
winsxs\manifests\amd64_microsoft-windows-wow64_31bf3856ad364e35_6.1.7600.20602_none_c4f7d8ca09dfa6fb.manifest
winsxs\manifests\amd64_microsoft-windows-wow64_31bf3856ad364e35_6.1.7600.16491_none_c40bea82f10bec2c.manifest
winsxs\manifests\wow64_microsoft-windows-wow64_31bf3856ad364e35_6.1.7600.20602_none_cf4c831c3e4068f6.manifest
winsxs\manifests\wow64_microsoft-windows-wow64_31bf3856ad364e35_6.1.7600.16491_none_ce6094d5256cae27.manifest
servicing\packages\Package_1_for_KB978637~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_1_for_KB978637~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_2_for_KB978637~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_2_for_KB978637~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_for_KB978637_RTM~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_for_KB978637_RTM~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_for_KB978637~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_for_KB978637~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_1_for_KB978637~31bf3856ad364e35~amd64~~6.1.1.1.cat
servicing\packages\Package_1_for_K... Read more

Read other 5 answers
RELEVANCY SCORE 52

Yesterday my wife's Dell computer running Vista Home Premium installed 16 of the 17 automatic updates. After numerous attempts I could still not get update KB 970892 SQL service pack 3 to install. It shows an unknown error code 737D.

Strange, on my Dell notebook also running Vista Home Premium all 17 installed right away. Both computers are 2 years old with lots of hard drive space and until this event all updates have worked without a hitch on both. How can I get this to install as Microsoft shows it as important?
Thank you.
G
 

A:Install failed-Windows Update KB970892 SQL Server 2005 sp3

Read other 16 answers
RELEVANCY SCORE 52

Using Lenovo Vantage:I was trying to install "Lenovo SSD Firmware Update Tool for Intel PS - 7 [32,64]/8.1/10 [64] - version 03".The installation was interrupted by the message on the screen:             ERRORVerification failed: (15) Access Denied            OK {button} A message about the failure stated as follows:Firmware update was not processed because software condition is not ready to update to some reason.  The attachment shows the command prompt below the above message. I tried to renew the installation twice (after rebooting) - the result was the same. What should I do to correct the situation?

Read other answers
RELEVANCY SCORE 52

Windows update is failed after install Bitdefender internet security.

The error code of windows update is 80246008, and the error code of background intelligent transfer service (BTIS) in eventviewer is 2147024894. So, I changed BITS into auto(delay), but BITS stops repeatedly when I was trying to perform windows update 5 times after rebooting.
 

A:Windows update is failed after install Bitdefender internet security

Did you try turning off Bitdefender and then try Windows update?
 

Read other 10 answers
RELEVANCY SCORE 52

Hi!

Ater upgrade to Threshold 2 I fixed all what was possible.
First, later again and again, reboot indicates problems:
Apps: Mail, Calendar, Store and Settings not working.
In case of Settings app starts, but windows disappears and is away - Taskman indicates no running.
Mail, Calendar and Store are in start menu highlighted by dark color and when I try to start them, they report that app can't run and that have contact admin to fix. I'm only one user - admin on my computer and cannot fix them.
Can anybody help me?
Also still not found possibility to set new place of Docs, Pictures and similar folders on HDD - default path is not possible to change, in 10240 it was like in Win7/8/8.1 - so possible.

Thank you for everything!
Miro

Read other answers
RELEVANCY SCORE 52

Hi there,
I have a hard drive which is failing. It has some very important data on it and the backup on my external drive has vanished.

I am trying to run HDRegen to give it a lease of life wnough to get the data off it. However when I run this or most other programs that are ona bootable CD, it just locks up.
What can I do? I am really desprate to get this data back.

If I booted HDRegen onto a working drive, and then run it scanning the broken drive, would that maybe work?
Please help.
Any adivice would really be apreciated!
Many thanks
 

A:Hard Drive with very important data has failed

Read other 11 answers
RELEVANCY SCORE 51.6

but AVG will install, what's up with that? ive scanned my computer for viruses with AVG and SUPERantispyware, they only find tracking cookies?

If you need to know, I'm running comodo firewall (but wasn't was running windows when trying to install the things I listed) and I'm currently running AVG

A:Avira refused to update, so I uninstalled and attempted to install Avast! but it failed...

If you uninstalled Avira via Add/Remove Programs only, you might still want to run Avira's uninstall tool to be sure it has 100% uninstalled all tidbits scattered on your drive and in the registry to avoid possible future issues. Here's a link to the uninstall tool download site:http://www.avira.com/en/support/av7_upgrade_tools.htmlAfter running the uninstall tool, Avast probably would have installed OK for you. I run Avast and it sure is quick to notice those remnants of previous antivirus programs during installation. It just thought you might have two AV's on your system------a definite no-no. The AVG, if you're happy with it, could yet encounter problems if there are bits of Avira still in your registry or lurking elsewhere on your pc. I'd definitely run that Avira uninstall tool just to be sure. You might even want to do a search on keyword AVIRA and see if you have any files/folders Avira left, too, and delete them.

Read other 3 answers
RELEVANCY SCORE 51.6

Old (2004) Compaq Presario, Win XP Home SP3, MSIE 8, Avast! Internet Security.  WinPatrol, SpywareBlaster, MVPS Hosts file, frequent scans with Malwarebytes AntiMalware.
 
Some days ago I ran an offered "emergency" update of Avast! Internet Security and forgot to uncheck the Google Chrome installation.  It took a couple of tries before the update would go to completion.  Immediate result was inability to access the Internet via MSIE 8.  Temporary fix was to "Repair" the AIS install.  That worked a few times, but now it does not (after what appeared to be an unnecessary Adobe Flash Player install).  I've removed AFP altogether for the time being, but that did not fix the problem.  Google Chrome does not appear among my installed programs, so I cannot remove it - but bing.com is now at the top of the R1 section of the HijackThis log.  Could that be blocking MSIE?  I do not use Bing.
 
When I try to go online with MSIE the program opens, then indicates "this tab has been recovered" (only the first tab, of three) and then closes immediately.  When I try to click on any link, for example in an e-mail message, MSIE opens and immediately closes again (with the usual invitation to report the problem to Microsoft).
 
I can post the HJT log if desired.
 
I am posting this from one of the office computers, since I cannot get online at home (e-mail continues to function normally on the home computer).
 
Thank... Read more

A:Unable to use MSIE 8 after Avast! update w/ failed Google Chrome install

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post.
 
Louis

Read other 19 answers
RELEVANCY SCORE 51.6

I'm running Windows 7 x86_64 architecture, and I am trying to install Internet Explorer 10 via the Windows Update service (currently I have Internet Explorer 8 installed). This update is continually failing with a 9C59 error (screenshot attached). I have tried to update to Internet Explorer 10 manually via the .exe to install Internet Explorer 10 and it also fails (as does, IE 9).

I have also attached the C:\Windows\Logs\CBS directory as a .zip file. From this, it seems as though some repair files are missing, although I can't quite figure out where these are supposed to be, or from which package/update they should have been installed from.

Any help appreciated,
Jon

A:Windows Update failed to install Internet Explorer 10 - Code 9C59

The problem seems to be very deep-rooted.
There are C results in your files - but the CBS.log reveals the following error

Code:
Pin (3): flags: 0 tlc: [Microsoft-Windows-ImageBasedSetup-IE-Base-Deployment-Downlevel-LanguagePack, Version = 6.2.9200.16521, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral]) ref: ( flgs: 00000000 guid: {d16d444c-56d8-11d5-882d-0080c847b195} name: [l:326{163}]"Microsoft-Windows-ImageBasedSetup-IE-Package-Base-Downlevel~31bf3856ad364e35~amd64~en-US~6.2.9200.16521.Microsoft-Windows-ImageBasedSetup-IE-Package-Base-Downlevel" ncdata: [l:0]"") thumbprint: [l:128{64}]"b691ff0ae0d6ef5035b67c9f9e97a062dc3a88fbf6e1a144209c26be94d5ccd2"
2013-08-09 18:59:20, Info CSI 00000024 Component change list:
2013-08-09 18:59:20, Info CSI 00000025 Couldn't find the hash of component: Microsoft-Windows-IE-IEShims, Version = 10.2.9200.16635, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the catalog [l:192{96}]"\SystemRoot\WinSxS\Catalogs\41f8d72a79f78879f1562ac60358fe1bb87d573fa345bf3a7a35765e101ce5ef.cat".
2013-08-09 18:59:20, Error CSI [email protected]/8/9:10:59:20.258 (F) d:\win7sp1_gdr\base\wc... Read more

Read other 4 answers