Over 1 million tech questions and answers.

Lenovo y580 Inter eXtensible Host Controller not working win10

Q: Lenovo y580 Inter eXtensible Host Controller not working win10

Greetings! I'm currently working on reinstalling win on my cousin's y580 with following specs:Intel(R) Core(TM) i3-3110M CPU @ 2.40GHz8GB RAMGEFORCE GTX 660M Everything went smoothly until the part where I want to install USB 3.0 drivers (responsible for 2x3.0 USB and 2.0 USB port). I tried everything from installing win7 drivers, uninstalling and reinstalling them with Windows Update to forcing INTEL drivers intalation. So far no luck. Browsing the forum I happened to find the topic: https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/USB-3-0-Ports-Not-Working-Y580/m-p/3457050#M149... , where the guy assumes that motherboard is broken cause he bought it with "broken USB ports". That is not the case, ports were working just fine on win8 until the moment win10 was introduced. In the device manager the driver shows the error 10. I also came for advice to my friend using the same notebook with better specs(i7) and they are working fine for him. So my question finally is: have anyone solved this problem for the given spec already and/or is it the case of the 64bit system(not fully supported with those specs)? I am frankly out of ideas rn. Cheers, Hubert

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Lenovo y580 Inter eXtensible Host Controller not working win10

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 94

Hi, i have an HP Pavilion 17-G133CY laptop and i am planning to put an SSD in it for a little while and installing Windows 7 on it for fun.  I know that HP does not provide drivers for Windows 7 and i can just extract the files from the Windows 10 Driver files and should be able to install them on Windows 7.  I am able to get most of the drivers for Windows 7 but one driver is missing and i think i know why.  USB 3.0 Driver is not for download and i think that is because when Windows 10 was released USB 3.0 was implimented on more computers that it was when Windows 7 was out.  i am looking for the driver or hoping that when i install Windows 7 and run updates that it is able to get the USB 3.0 driver or i can download one that will work on Windows 7 and allow me to use all 3 of my USB ports.  I don't want to be stuck with 1 USB 2.0 Port nor USB 2.0 speeds.

A:AMD USB 3.0 eXtensible Host Controller

@Dudefoxlive Did you try this one??? http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_139250_1 REO

Read other 2 answers
RELEVANCY SCORE 92

Hello to everyone,

So, before some time I had Win 8 and everything was fine. After a while I have had installed fresh Win 8.1 system. After that I tried and tried to make USB 3.0 in function but not successful. Trying everything, reinstalling, looking from ASUS website for drivers, but then I agreed with myself that I will wait until Win 10 came out so I had hope that this will solve my problem but it didn't! :-( I also looked on forums, different threads but no luck. I have got ASUS laptop G55VW (ROG series) and on ASUS website there is no drivers for win 10 (except 8 and 9 Series chipset) and yes, it's good to know if someone could help me, my chipset is HM77 Ivy Bridge.

Thank you in advance!

Ivan

A:Intel® USB 3.0 eXtensible Host Controller driver

Try to download the driver directly from www.intel.com If there is no Windows 10 driver, download the Windows 8 driver instead. You may have to run it in Windows 8 compatibility mode. Right-click on the file and select Properties. Go to Compatibility tab and check the box to set compatibility to Windows 8. Also check the Run as Administrator box. Now it should install OK. It is a good idea to also update the chipset drivers (found in the software section of Intel download site).

Intel's site confuses you and it takes some guesswork to find a driver. Both drivers for USB 3.0 and chipset are in Software section, Chipset software. To save you the trouble, here is the direct link for the USB 3.0 driver. Yes, it says it is Windows 7 only because Windows 8 and 10 are supposed to install a driver automatically through Windows Update. So what! Download it and run it in Windows 7 compatibility mode. It should be far better than Windows Update generic USB 3.0 driver.

Read other 4 answers
RELEVANCY SCORE 92

A few usb devices won't be recognized and there is a yellow warning symbol in the device manager of Win 7 that there is a driver that was "installed incorrectly". I did some research on the missing driver name and found it on the Intel support site. I downloaded the Win 7 version. I ran it and it claims that my "system does not meet requirements". It's not seeing an old IDE hard drive (500gig) that I have a an external usb connected enclosure for. Very frustrated and I am not sure why Windows 7 isn't playing nice. I even uninstalled the "incorrect" driver that it stuck me with and restarted the system hoping it would possibly reinstall the drive correctly. No dice. I would greatly appreciate some fix for this as I need to get this drive read to move files from it. It is Fat32 and I can't erase it without deleting everything on it. Plus, the drive isn't recognized when I plug in the usb cable. I will post the error messages to shed hopefully some light on this.









Computer info =

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count: 8
RAM: 8149 Mb
Graphics Card: NVIDIA GeForce GTX 660, -2048 Mb
Hard Drives: C: Total - 114370 MB, Free - 71338 MB; G: Total - 715370 MB, Free - 52667 MB; X: Total - 228933 MB, Free - 185746 MB;
Motherboard: Gi... Read more

A:Intel USB 3.0 eXtensible Host Controller won't install

OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Motherboard: Gigabyte Technology Co., Ltd., Z77-HD3Click to expand...

Gigabyte GA-Z77-HD3 Motherboard
Click "Support & Downloads".
Select "Windows 7 64-bit" for the operating system.
Scroll down to "Intel USB 3.0 Driver".
Select the appropriate geographic link to download and save and then install it.

---------------------------------------------------------------
 

Read other 1 answers
RELEVANCY SCORE 92

Solution provided by DELL to a problem I have been unable to resolve on my Lenovo P50 using Lenovo Tools and Drivers. Background Info: I have Windows 7 Ult SP1 Retail on my P50, with two issues.1. MS Paint, Lenovo Battery utility and the Lenovo Network utility would never display a window when opened, just an icon in the taskbar or a splash screen, then absolutely nothing. Mouse would go jittery for about 20-30 seconds. 2. I could not get a USB3.1 external drive dock to work on the USB C port. The external drive dock came with a USB C to USB3.1 cable. Ruled out the dock as an issue. So I uninstalled all Intel drivers, Lenovo utilities and the Graphics drivers to get back to a base Win 7 install and confirmed Paint worked. Reinstalled drivers individually checking system behaviour at each step. I suspect item 1 was resolved by the most recent Lenovo graphics driver bundle. Item 2 is where DELL come to the rescue. The only Win 7 Lenovo USB 3.1 driver (Version 15.2.30.11) will not install on my system manually and fails using any of the Lenovo tools or utilities.http://pcsupport.lenovo.com/au/en/products/Laptops-and-netbooks/ThinkPad-P-Series-laptops/ThinkPad-P... is a dud. It was originally installed during Win7 install using the built in Admin Account before the OOBE. Uninstalled to investigate both issues. Now it will not install under my user account that is an administartor account. Google turned up DELL have Version 15.2.30... Read more

Read other answers
RELEVANCY SCORE 92

Hi
I got the same issue. USB extensible host controller not signed by microsoft.
I get error code 52 and my company have policy to only use signed drivers.
 
This cause hte brand new P51 laptop for 2500 dollars not abling to use none of the USB ports.
 
I have win 10. Tried every lenovo chipsset drivers and have the latest and the greatest updates suggestet from Lenono.
 
This just blows my mind that lenovo ships out hardware without signed drivers.  


























driver_signature_usb_host_controller.PNG ?48 KB

A:[P51] Intel USB 3.1 eXtensible Host Controller and Hub Driver

Hello,
 
I have split your reply off from the Intel USB 3.1 eXtensible Host Controller and Hub Driver message thread involving the ThinkPad P50 into a separate one for your P51 for visibility.
 
If I am reading the screenshot correctly, it looks like the digital signature on the device driver for the USB host either cannot be read, is missing, or cannot be verified (which I assume means a connection being made to Microsoft's servers for verification).
 
It seems very odd to me that Lenovo would ship a ThinkPad P51 preloaded with Windows 10 containing an unsigned device driver.  And, if I am interpreting the screen correctly, the driver is actually written by Microsoft, not Intel (the "(Microsoft)" at the end of the driver's name).
 
My initial thought is that somehow the operating system install was corrupted during installation by Lenovo.  It must ben extraordinarly rare event, as I think I have seen it perhaps twice in the past twenty years or so, but that is about the only scenario I can think of where one could find a corrupt file in the preloaded operating system.
 
If this is the case, there's only one solution I can think of, and that's to order the recovery media from Lenovo, wipe the drive, and then perform a clean install of the operating system using the recovery media.  The reason that I suggest doing it this way, as opposed to using the recovery partition, is because I'm concerned that if there's a problem with one pre-load... Read more

Read other 1 answers
RELEVANCY SCORE 92

I strongly believe the drivers that Lenovo have on its System Update server for the Intel USB 3.0 eXtensible Host Controller for Win 7 32 bit OS for the models of T430s and X230 are the wrong ones or they are corrupted.  Five times now after I have completed my base corporate image the USB 3.0 ports will be working correctly.  If I install the Intel USB 3.0 eXtensible Host Controller drivers from System Update for Win 7 32bit I will get a stop error and after the restart the USB 3.0 ports will stop working.  I have tested this on two X230 laptops and a T430s.  Same results across the board.   I doubt I?m the only one who has reported this issue. Any way Lenovo can confirm is they are seeing the same issue? Thanks

Read other answers
RELEVANCY SCORE 92

The device cannot start. Error 10.

I have installed the drivers various times and the controller will not work.

I have an MSI Z77 GD55

It is a brand new build and it will not pick up the USB 3 controller. Everything else is fine.

A:Intel(R) USB 3.0 eXtensible Host Controller (error 10)

Do you have the device code for the controller (see the hardware device info for the device in Device Manager)? It will have a VEN and DEV number.
Intel's vender number is 8086.

Read other 9 answers
RELEVANCY SCORE 92

Dell Inspiron 14 3421
Intel i3 processor
4GB RAM

I had upgraded my laptop from Windows 8.1 Pro 64 bit to Windows 10 Pro 64 bit. All the USB ports worked fine for a few days. Then suddenly, the laptop went off while playing the game Thief. (This usually happens when the laptop heats up too much, not a big deal.)

When I turned on the laptop, the two USB 3.0 ports stopped working. There was no power in either of the USB 3.0 ports. I checked this with a mini USB fan.

I went to the device manager and found a yellow triangle before Intel USB 3.0 eXtensible Host Controller.
When I double clicked on it, in the device status box, it showed "This device cannot start. (Code 10)".

I thought it was a problem with Windows 10 and degraded the OS to Windows 7 Ultimate 32 bit and installed and updated all drivers, hoping it would help. But still the same problem exists with the USB 3.0 port.

Please Help!!

Read other answers
RELEVANCY SCORE 90.8

I have a Lenovo H50-50 PC running Windows 10 version 1709. The -Intel(R) USB 3.0 eXtensible Host Controller - 1.0 (Microsoft) is waking my PC by itself. I verified that this is the cause by going to the Event Viewer. How can I disable that from happening?

Read other answers
RELEVANCY SCORE 90.8

I need the AMD USB 3.0 eXtensible Host Controller, I have an HP 110-217C with Windows 7 Prof.
The Universal Serial Bus (USB) Controller is missing in the Device Manager
Thanks

Read other answers
RELEVANCY SCORE 90.8

I have a Lenovo H50-50 PC running Windows 10 version 1709. The -Intel(R) USB 3.0 eXtensible Host Controller - 1.0 (Microsoft) is waking my PC by itself. I verified that this is the cause by going to the Event Viewer. How can I disable that from happening?
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 

Read other answers
RELEVANCY SCORE 90.8

So, I have a brand new HP Pavilion 15 Notebook PC. The other day, all the USB ports stopped working. Looks like I have a couple unknown divices missing drivers. This is what I get.. AMD USB 3.0 Extensible Host Controller 0100 (Microsoft) Code 28.  I cant find this driver anywhere, even on the AMD website. I've also updated my BIOS and chipset and just about everything else I can think of and the USB ports still dont work. They get power, I can charge a phone through them, but the laptop doesnt see what is connected.  Anyone know where to find this driver? Thanks

A:AMD USB 3.0 Extensible Host Controller 0100 (Microsoft) Code...

Hi @KFM1 , Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue on your HP Pavilion 15 Notebook and the USB not working correctly. Please note remove any and all USB devices. Disconnect all non-essential devices. I would go to the device manager and uninstall any USB devices. Restart the notebook. Here is a driver for your Notebook and Windows 8.1. I would be happy to assist if needed. How Do I Find My Model Number or Product Number?Please let me know. Thanks.

Read other 2 answers
RELEVANCY SCORE 90.8

I'm getting this BSOD on a new Windows 7 system. I ran the dm log collector (zip file attached) and I have updated my system spec. I hope you can tell me what driver to install. I'm new at this. Thanks!

A:BSOD related to USB 3.0 eXtensible Host Controller Driver

Hello, perkinw. You have several dump files. Some of the will not open correctly, but here are the results of the ones that will.


Code:
Use !analyze -v to get detailed debugging information.
BugCheck 1000007E, {ffffffffc0000005, fffff8800524e3b4, fffff880124a33f8, fffff880124a2c50}
Probably caused by : iusb3xhc.sys ( iusb3xhc+4e3b4 )
Followup: MachineOwner
That is your Intel(R) USB 3.0 eXtensible Host Controller Driver


Code:
iusb3hub
start end module name
fffff880`05828000 fffff880`0588b000 iusb3hub T (no symbols)
Loaded symbol image file: iusb3hub.sys
Image path: \SystemRoot\system32\DRIVERS\iusb3hub.sys
Image name: iusb3hub.sys
Timestamp: Thu Oct 30 05:05:14 2014 (54520D5A)
CheckSum: 00066231
ImageSize: 00063000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
That is your Intel(R) USB 3.0 Hub Driver and this is your current driver


Code:
iusb3hub
start end module name
fffff880`05828000 fffff880`0588b000 iusb3hub T (no symbols)
Loaded symbol image file: iusb3hub.sys
Image path: \SystemRoot\system32\DRIVERS\iusb3hub.sys
Image name: iusb3hub.sys
Timestamp: Thu Oct 30 05:05:14 2014 (54520D5A)
CheckSum: 00066231
ImageSize: 00063000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

Code:
fffff880`1296ca88 fffff880`0f2f58bbUnable to load image \SystemRoot\... Read more

Read other 9 answers
RELEVANCY SCORE 90.8

Hi everyone! I've been experiencing some sporadic problems where my PC will not go into sleep mode. I ran powercfg lastwake in command prompt and it came up with Intel (R) USB 3.0 extensible Host Controller. I then tried going to device manager to try and un-check the "Allow this device to wake computer" option but obviously there is no such option for it under Universal Series Bus Controllers. Does anyone know how to fix this problem?
thanks in advance

A:Intel USB 3.0 extensible host controller preventing PC from sleeping

Hi try updating the Driver for the USB Host Controller ...

Read other 3 answers
RELEVANCY SCORE 89.2

I used the Dell Command Update and the Dell Support page to locate the latest drivers.
Listed for the Optiplex 7040 was the USB 3 eXtensible Host Controller (See attached Image)
The version 4.0.6.60, A4 - Chipset_Driver_CWGRX_WN32_4.0.6.60_A4_01.EXE
If you check the detail info, the Optiplex is not listed as systems it covers.
Once I installed it I got the OS error "Windows failed to start. A recent hardware or software change might be the cause"

A:Optiplex 7040 - Latest USB 3 eXtensible Host Controller Driver v4.0.6.60 cause OS not to Boot

AaronCooper,Start the computer and tap the F12 key. Enter Safe Mode and uninstall the driver or choose from the F12 List., Last Known Good Configuration.

Read other 2 answers
RELEVANCY SCORE 88

Hello!
I was upgrading my Latitude E5530 with Samsung 850 EVO SSD. I have downloaded OS reinstallation image from Dell support page and put it on USB flash stick. I have replaced HDD with SSD and began clean install.
First surprise was error window telling I need CD/DVD with drivers for my hardware. I saw recomendations to give Intel RST driver, it was recognized, but that did not wort, I could not continue installation. At this time USB flash stick was in USB port on the left side of the notebook.
Next I put the stick in the port on the right side of the note, and it worked like a charm, the system was deployed in 6 minutes.
Next it was attempt to install drivers. I have manually installed NIC driver, then Dell Command Update and let it install drivers. That attempt was messed. Particularly, laptop BSOD'ed on  Intel USB 3.0 eXtensible Host Controller Driver installation. In the next attempt to install same driver I get error it was unable to install.
I have tried once over, and installed drivers manually in prescribed driver installation order. At #3 there is  Intel USB 3.0 eXtensible Host Controller Driver. When I install it using setup program, laptop gives BSOD. In the next attempt to install same driver I get error it was unable to install. I knew I have to unplug all USB devices and install this driver from the drive, no matter, still BSOD.
In both cases I noticed left side USB port was not working at all, and other worked intermittently, accepting USB s... Read more

Read other answers
RELEVANCY SCORE 88

I have been tasked with rebuilding a handful of old(ish) Dell E6330 laptops. All with the same hardware specs, 7 series/C216 chipset family. I am losing sleep over this and could really use a fresh perspective.
 I am starting from a base Win 7 64 bit OS, provided by Dell. I have been able to update all of the drivers including BIOS except the "Intel 3.0 extensible host controller" whenever i try to install it, it gives me the BSOD just after installation.
 When i go into device manager, it shows installed, but none of the usb 3.0 ports work (which is all of them). However, when i hook the laptop up to a docking station, i can get the 2.0 ports to work, so i have a work around.
 I noticed that after i get the BSOD, under "Universal Serial Bus Controllers" in device manager, there is a Unknown Device listed in there. Though there is no yellow exclamation identifying there is something wrong, when i open it, it says "No drivers are installed for this device" when i select update driver it says the best driver software for your device is already installed (Intel R USB 3.0 Root Hub).
 
Any help is appreciated!

Read other answers
RELEVANCY SCORE 88

 
I have a 7720, 17r spec edition. and my usb 3.0 stick isnt working but it does work oni my windows 8 desktop. so far neither microsoft no dell has been able to figure it out.
Im pretty sure it is the Intel USB 3.0 eXtensible Host Controller driver.  but when i try to install the one on the intel website i get a message saying that my system inst compatible. so i tried to download it from the dell website and it says it cant be found!!!

its really disapointing when your brand new computer doesnt work.

A:Intel USB 3.0 eXtensible Host Controller driver for 7720 inspiron 17r special edition

Hi Logan,
I apologize for the inconvenience caused. The driver for USB 3.0 is not available as Windows 8 includes native support for USB 3.0.I will recommend you to  re-install chipset drivers:

Click on 'Start ‘and right click on 'My Computer'.
Click on 'Manage' and click on 'Device Manager'.
Expand 'Universal Bus Controller' and right click on each entry named as 'USB Root Hub' and click on 'uninstall'.
Once done, restart the system and install Chipset drivers from both the links: 


INTEL Intel Management Engine Interface: http://dell.to/XfgiE3Dell Intel HM77 Chipset: http://dell.to/XtphhaCard reader: http://dell.to/VLDhsw
Steps to install a driver:

Click on 'Download File'.
Select 'Single-file download' and click on 'Continue'.
Click on 'Save' and save the driver on the desktop.
Right click on the driver from the desktop and select 'Run as administrator'.
Install the driver following the on screen instructions.
Restart the system after the installation is done. 

Once the chipset drivers are installed, make sure you install all the Windows updates and restart the system.
 Update the BIOS in case the issue is not resolved:

Click on the link: http://dell.to/12zxqbA
Click on 'Download Now'.
Select 'Single-file Download' and click on 'Continue'.
Click on 'Run' and follow t... Read more

Read other 30 answers
RELEVANCY SCORE 82

Recently Upgraded: Running Windows 7, 64-bit on MSI Z97 ATX board with Intel Core i7-4790K processor. I installed the drivers from the CD that came with the board from MSI.

My usage is strictly internet, e-mail and office applications. Occasional other usage is to connect additional hard disk via internal SATA and scanning for viruses and malicious programs. I do not overclock or play games.

I am trying to determine whether there is any real benefit to keeping the following:
"Intel USB 3.0 eXtensible Host Controller Driver". I thought USB3 drivers were already in W7 so why do I need this driver from Intel? I've read this; but, it never gets into whether it is an essential program or what functionality might be lost if I uninstall it.
"MSI Super Charger". I've read this; but, I can't see any real benefit, The only thing I charge from this computer is my phone and I am very well satisfied with its charging time.

 

A:Solved: What is "Intel USB 3.0 eXtensible Host Controller Driver"

Read other 16 answers
RELEVANCY SCORE 72.8

Laptop updated to Windows 10 then my friend downgraded back to Windows 7 and now the keyboard, mouse, and USB drives don't work and there's no backup image. HELP!!!

A:Lenovo y580 keyboard and track pad not working

Model # of laptop? Did you use the revert back to Windows 7 feature or clean install over Windows 10?
 
*edit* Sorry, saw you put the model # in the title.

Read other 2 answers
RELEVANCY SCORE 66.4

I had three USB devices to connect to two ports. I bought a Stratitec four port USB hub. Somewhere along the trek I must have removed the controller in Device Manager. When I rebooted, the system recognized new device and apparently installed software (drivers, etc.; but the USB ports on the computer are not recognized (I have no USB cables connected to computed now). In Device Manager under Universal Serial Bus controllers, the next line has a !surrounded by yellow. I went to Radio Shack and looked on their computer (not like mine), but Device Mgr. was the same except on the 2nd line there was no dash and it said "interrupt Request 11" and then on the next line "Input/Output Range 2080-209F. I would just like to get the driver for the card (PCI to USB)installed. Any help greatly appreciated.
P.S. This is a Gigabyte Technology motherboard GA-BX2000+ with a Pentium III 550Mhz. Windows 98 2nd edition. The controller is on board.
 

A:PCI to USB Host controller not working

Read other 16 answers
RELEVANCY SCORE 66

I just installed a pci card that allows me to use 4 additional usb ports externally, plus one internally. I think that it is called a usb host card or a controller card, I'm not sure what the proper terminology is. Anyways, I popped it in, started my computer, made sure that it went through the found new hardware wizard and everything, it said the hardware was installed and ready to use- but none of the usb devices i plug into it work. the computer doesn't acknowledge that they are there and there is no power being provided to devices such as my ipod that require a usb charge. Any idea what is going on? Thanks.

A:Usb Host Controller Card Not Working

Go to your device manager and check your usb controllers for one that is "enhanced". If it isn't there, update your driver. Did you get a disk with the pci card? You may need to disable your old ports until you install the 2.0 and then enable again.

Read other 2 answers
RELEVANCY SCORE 65.2

I have two USB ports which recently stopped working.  They are both located on the left side of the notebook. There are two ports on the right side which are operational. The two non-working ports have power can I can use them for charging a device (phone, etc.). However, they do not recognize any USB device. No Errors are emitted but no devices show up either. Device manager reported a controller as having a problem. I unistalled the device (Renesas USB 3.0 eXtensible Host Controller) and then ran a scan for hardware changes. The scan did not detect the controller. I have a feeling this is a hardware failure of the motherboard but am hopeful there may be another solution. Device Manager also reports a problem with USB xHCI Compliant Host Controller  Thanks,John

Read other answers
RELEVANCY SCORE 65.2

Folks,

I have been working on this on/off all weekend and I STILL cannot get my USB 2.0 ports to work again and they were all working fine for the past 10 months. All 8 USB ports stopped working in 2.0 mode last week. They work perfectly fine in 1.1 mode using the standard Host Controller (BIOS is set for 1.1+2.0) when I disable the enhanced host controller.

My drivers are apparently screwed and I have done mostly everything suggested in various web sites to revive them (they had to be overwritten!).

My mobo doesn't have any updated chipset drivers (nVidia) and I simply reloaded my XP drivers to no avail.

Outside of the obvious/common troubleshooting, any one have any thoughts on this issue? I believe an update killed my ports!

Thanks!
BillyD

A:USB - Enhanced USB Host Controller Not working - Drivers!!!

Check this out:
Windows 7 sp1 & USB2 bug.
USB Driver - General Fix for Problems

Read other 6 answers
RELEVANCY SCORE 65.2

I have had occasional trouble with my hi-speed USB connection to an external hard drive - it is sometimes recognised as hi-speed, and sometimes not. It has now finally given up completely. When I go into the Device Manager, select the Standard Enhanced PCI to USB Host Controller, and go into Properties, I am told that the device cannot start (Code 10). When I have checked, I have been informed that my driver is up to date. I have sent the data to Microsoft for a possible solution, but have had no response. I would be grateful for any suggestions. Thank you.
 

A:Solved: Hi-Speed USB Host Controller not working.

what was the solution please?
 

Read other 1 answers
RELEVANCY SCORE 65.2

So I accidentally uninstalled the program and my driver stopped working. I went over to hp website to find the software and driver and installed but it does not work.

A:Renesas Electronics USB 3.0 Host Controller Not working

If this was recent do you have a Restore Point dated before you uninstalled the program?

Read other 9 answers
RELEVANCY SCORE 64.4

Hi,

Recently got Fresco Logic USB 3.0 Host Controller (PCI Express Card), first tried and it was cool with ~60-80MB/s transfer rate.

However, soon after I restarted the computer, the PCI card no longer works - cannot detect any usb device connected . Having said that, device manager does not show any unrecognized device .

When I connected the mouse to the USB port of the PCI card, it lights up, but no any response.

Could anyone give a hand on this issue? Thanks.

----

Windows 7 Professional 64bit English

A:Fresco Logic USB 3.0 Host Controller - Not working after pc restart

Welcome to Seven Forums huikiutat.
In Device Manager does it show your USB3.0 card? If so you can try RevoUninstaller (link in my sig) and remove the Fresco drivers. Then Reinstall them.

Read other 5 answers
RELEVANCY SCORE 64.4

Hi. First, im on a Lenovo Y510p Laptop. Yesterday, windows updated through windows update and when i logged into my computer, none of my usb ports were working. As in: My external mouse and keyboard were not connecting, they were working just before the update though.(they are new.) Device manager said there was an error with some driver so i tried to update, it said it was where it needed to be, so i uninstalled it, restarted the computer and it was fixed. Now, USB ports still not working, i have an error with this driver:

USB xHCI Compliant Host Controller
Under device status, it says:
Windows cannot initialize the device driver for this hardware. (Code 37)
The specified image file did not have the correct format, it did not have an initial MZ.

Im not sure what other information i should give so here is some stuff that may help:

When i press update driver it says that it is running the latest driver.
Obviously, this driver is under Universal serial bus controllers in device manager.
I use the laptop for mostly gaming.
My mouse and keyboard WERE working before the update the same night.
Any more info that could help just let me know, thanks so much.

Read other answers
RELEVANCY SCORE 63.2

Hi All!

I'm new here, so I'm guessing as to which forum this should go in. Please forgive if I've put it in the wrong place!

I'm having some issues with my desktop computer. Over the past few months it's been running slower and slower, especially online and especially when streaming graphics are concerned. Webkinz runs rediculously slow, and movies on youtube are pretty much unwatchable.

There was also this odd problem of the computer not being able to properly boot from "off". It would run through the RAM test and identify the various hardware (disk drives, CD ROM, DVD, etc) and then freeze indicating that I needed to insert a boot disk (or something like that). I'd then give it a CTRL ALT DEL and it would run through the startup just fine. I'm sorry that I can't remember the exact error message, but the problem seems to have disappeared after the below actions were completed.

I started trying to fix things by clearing room on my harddrive. I'm not much of a computer tech, but I figured a fuller harddrive might cause some issues. I got rid of all my music and video files and backed up all my photos and deleted them. I also removed everything "superfluous" that I could find (e.g. RealPlayer, Java, Adobe, etc). There was no effect.

I use an ATI Radeon 9800 video card, so I thought maybe if I reinstalled, or at least updated the drivers, that might help. I use Omega drivers. There was no increase in performance.

It was whi... Read more

A:Really slow working desktop PC. Possible SCSI/RAID host controller problem?

I got the Video card incorrect... it's a 9600, not a 9800.

Anyways, attached are the Everest report, screen shot of the hardware profile and txt files containing some of the error messages. There were a lot more error messages on application events, so I've taken just the most recent.

Sean

Read other 5 answers
RELEVANCY SCORE 62.8

Got stuck at power settings and also x1 tablet is not in the list.

Read other answers
RELEVANCY SCORE 62.4

I've T420s, Ricoh PICe SDXC/MMC Host Controller, and several SD cards. Right away I can say that the cards (Kingston, Samsung, Transcend) are all right, tried them on different computer and phone, they work well, so I assume this is not a card issue. I never used Card reader extensively, so I can't say if it started lately or was always like that, my T420s is about 1 year old and I'm running Windows 7 32bit. Here is the problem. Device seems to be switching on and off all the time when the card is inserted or taken out. I can say this as I'm keeping device manager window open. It seems like the connection between card reader and motherboard (?) is very bad, as I have to press on the device to pop out and press it back in to appear in the list of devices. When I plug in the card, it might actually show up, but then, when I pop out the card and pop it back it, it won't show again. So I have to take out the device itself again to have a chance of accessing my card. I've tried updating the driver from http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014960 But it  didn't help. I've seen this: http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/SD-Card-reader-not-working-Code-22-ThinkPad... But even if the device appears under IDE ATA/ATAPI Controllers, there is no "Ricoh SD Disk Device" under "Disk Drives" most of the times when I insert cards. Anyone had similar issues?

A:Ricoh PCIe SDXC/MMC Host Controller is working porrly with cards, T420s

Hi, answer42
 
I would make sure that the BIOS is up to date. If the BIOS is not up to date, the motherboard may not be fully recognizing when a card is present in the port. The latest BIOS for your machine is 1.35, and you can find that here. So definitely make sure the BIOS is up to date and see if that helps the issue.
 
Hope it helps,
Adam





______________________________________________________________________________________________________________Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Read other 5 answers
RELEVANCY SCORE 61.6

Hello everybody. I can't get my laptop operate at CPU turbo frequency any more! I got my Z710 with windows 8.1 preloaded. The laptop came with Intel's i7 4710 MQ CPU (2.5 GHz base freq, 3.5 GHz max turbo freq) and I could let the processor go up to the turbo frequency using lenovo's pre-installed energy manager software. I then upgraded my OS to windows 10 through microsoft update, keeping the energy manager which was compatible with the new version of windows and everything kept working OK. With the energy manager's high performance option, CPU single core frequency went up to 3.49 GHz (tested with CPU-Z and Si Sandra). However, after getting a new SSD I did a clean install of windows 10 and tried to do the same thing with windows built-in power management (since lenovo doesn't provide a power manager for windows 10 as far as I know) and it doesn't work. With the "High Perdormance" option and minimum processor state = maximum processor state = 100%, the speed never goes over 2.5 GHz. Is there some extra configuration I need to make or do I need extra software like intel's XTU or something like that?Any advice would be greatly appreciated.

A:Lenovo Z710 CPU turbo mode not working after win10...

I don't know why Turbo boost doesn't kick under load automatically. But my upgraded Z70 is in the same boat.



T520 Model 4239 Intel(R) Core(TM) i7-2860QMbr>; Nvidia NVS 4200M Windows 7 Home Prem - 64bit w/8GBZ70-80 I7 - 5500U 16GB GB - 1TB HD Window 8.1 64bit FHD 17.3 inch Display, Nvidia G840 w/2GB memory

Read other 1 answers
RELEVANCY SCORE 60.8

I?m downgrading a ASUS N550LF-CN100H from windows 8 to windows 7 Pro x64.

But when I try to install the driver "Intel(R) USB 3.0 eXtensible Host Controller Driver" the system crash.
I have installed the latest version of the BIOS (2.12) and changed some settings (for W7).
- Boot -> Lunch CSM = Enabled
- Security -> Secure Boot Control= Disabled

I have tried with the driver coming from the Intel site and with "Driver Genius" (same driver).
Do you have any advice to solve this issue because Asus doesn?t give any support for downgrade ?

Thanks

A:"Intel USB 3.0 eXtensible Host Cont. Driver" Crash during installation

Did you try the support section of Asus to download drivers. See this link and change to your model
ASUSTeK Computer Inc. -Support- Drivers and Download X550LA

Read other 7 answers
RELEVANCY SCORE 60

Hello, I've purchased the laptop two months ago, did a clean install of Win10 and discovered that the device does not detect headphones.I thought it'd be a minor issue but turns out the headphones, if disconnected and then reconnected, don't work the second time. The speakers turn off while they're plugged in so it's double odd. Headphones work on different devices perfectly without any problems. They're Panasonic. They have two black bars on the jack.Laptop says the Audio driver is installed and updated - Realtek High Definition Audio 10.0.15063.502I've already tried to send it over to Lenovo under warranty to fix it but they decided the laptop works correctly. I'm honestly out of ideas and would love any help.

Read other answers
RELEVANCY SCORE 58.8

Hi there, after heaps of tries I have managed to get the Sierra Wireless working in Linux Mint 18.2, the only problem, it automatically goes back to unavailable after suspending or disabling and then re-enabling it. The only way to get it to work again is to restart the lap in Win10 and then again into Linux again. Any workaround? This is being a massive pain!

Read other answers
RELEVANCY SCORE 58.4

Hello, As stated in the title, I have a Lenovo IdeaPad y580. I purchased it approximately three-and-a-half years ago, and only now is it really beginning to chug durings its processes. Point is, I want it to last perhaps another half year or so while I finish saving up for another computer. As a gamer, I'm fine with the limitations of the GPU, but sometimes my laptop legitimately has issues processing stuff, such as loading Google Chrome properly. I know enough about Windows to clean out viral matter and uninstall programs that I don't use that are running in the back. But does anyone have any tips or tricks to make this hunk of junk last maybe six more months before it becomes unusable?TL;DR I need to make my laptop run at least a reasonably sub-average to average level for six more months. Any tips are appreciated.

Read other answers
RELEVANCY SCORE 58.4

I'm just curious if this kind if setup causes any issues. Did anyone try that?

A:Lenovo Y580 Windows 10 SSD + HDD. Did anybody try ...

I currently have m-sata ssd and sata hdd installed. I upgraded from 8.1 to 10 via window's means, then from RTM to insiders build. Everything works fine.

Read other 1 answers
RELEVANCY SCORE 58.4

Hi,

I own a Y580-M772CMH 15.6FHD/i7-3610QM/8G/ laptop with Windows 7 and a few weeks ago I used Ccleaner to clean the registry. Like the dumb stupid person I am I did not pay attention to what it was "cleaning".

Next time I booted up my Laptop it failed to start Windows and gave the following message:

Check cable connection!
PXE-M0F: Exiting Intel PXE ROM.
No bootable device -- insert boot disk and press any key

So next time I pressed F2 while booting to see:

Boot Device Priority
Internal HDD: SAMSUNG MZMPC064HBDR-000L1
SATA HDD: ST1000LM024 HN-M101MBB
SATA ODD: Optiarc BD ROM BC-5550H
Network Boot: Atheros Boot Agent

To me it looked like I still had both disks working so I put in a Windows ISO before boot to see if I could repair. The System Recovery Options screen showed me no known existing OS on the device.

So I powered down and used One Key Recovery which told me when I clicked to restore to factory conditions that the partition layout has changed.

Finally I used a bootable Partition Wizard and that showed me this:

Note the negative used value at disk 1.
To my layman's eyes it seems like the SSD and HDD, that are normally combined by a Lenovo software Raid are now separate. And something I deleted with Ccleaner by accident caused it (probably).

Main thing is, I actually don't know what the problem is and so don't know how to proceed.

I'm afraid my data is lost to me, which isn't a terrible loss, but am I correct in assuming... Read more

Read other answers
RELEVANCY SCORE 57.6

Hi,I have huge problem which is driving me nuts. My laptop isn't charging well. It randomly disconnects AC adaptor. I'll try to discribe this situation in detail:First time it was about 6 months ago. I was using my laptop without battery (i think i was playing Skyrim or something) and my laptop just turn off (immediately, just black screen and completly off at that point). I thought it was no big deal, so i powered up laptop again and enjoyed my gameplay. After few days it happened again. And it was happening often and often. Until my laptop started doing this even when i was using word or surfing the web or even wasn't doing anything. Then i plugged my battery in. What i realized, that my laptop just disconnect AC and at the front/bottom where the indication lights are, the solid white battery light (2nd from left) turns into blinking red/orange. So i plug off AC and stick it right back and laptop is charging again. But i can't do this everytime it happens, it is really frustrating and messes with laptop's performance.Basically i can't use my laptop normaly. Somethimes it stays powered half of day without any faults (ofcourse i'm not talking about gaming, i forgot it long time ago), sometimes it disconnect charging 2-3 times per minute.Here is what i tried to do:-Clean everything inside my laptop (dust, dirt)-Reinstall Windows-Reapply thermal compound-Power drain (when battery and AC isn't plugged and laptop is turned off, you hold power buttom for about 30 sec)-Voltage chec... Read more

Read other answers
RELEVANCY SCORE 57.6

Hello, Recently I noticed that some keys on my keyboard stopped working. First of all I found that ESC key does not work. Then I did an online test (http://www.keyboardtester.com/) and found that following keys does not work : esc, f4, f5, f6, f7, alt (left to the space). After some time esc key started to work for a few minutes but then it stopped once again. Esc key also didn't work in the BIOS. Looks like a hardware failure, but is it possible that only some keys stopped to work? I would be very grateful for any advice. Thanks

Read other answers
RELEVANCY SCORE 57.6

Hello, I need a new battery for My Y580, after a long and frustrating search online it seems that nobody sells the original 6700 mah battery. So I went looking for alternative soloutions and I found this ThinkPad Battery 75+ (6 Cell) it is visually and size wise identical to mine. Now the question is: will it work with my Y580 as in the long list below the description, mine (Model no 20132) is not listed compatible. Thank you

Read other answers
RELEVANCY SCORE 57.6

Hi,

I need some help with bsods on Windows 8.1 OS. I'm not sure but probably there is my fault that this happens. I have Lenovo Y580 and a few months ago I updated my bios to version 5DCN40WW(v2.07), i downloaded it from Lenovo support website (in this time i got windows 7), then i decide to run Windows 8, but this bios was purposed for Windows 7 and now i cant find 'actualization' to my old bios wich was purposeed to Windows 8, I'm looking for version 5DCN89WW of bios to this Lenovo. Now I have 2-3 bsods a day, even after format, I've updated my drivers using SlimDrivers and downloaded actual drivers from Intel website,on the Intel website I had an information that product has been detected as Kontroler Qualcomm Atheros AR8161 PCI-E Gigabit Ethernet Controller (NDIS 6.30) but this device is unknown or unsupported (current driver:2.1.0.16) and same thing with Audio Driver for Intel Desktop Board, product detected: Sound Bluetooth (current driver: 12.0.0.2951).

I did memtest86:
https://dl.dropboxusercontent.com/u/...07-032101.html

And this is scr from Crystal Disk Info:
https://dl.dropboxusercontent.com/u/7166435/disk.jpg

And at the end there are .dmp files:
https://dl.dropboxusercontent.com/u/...11-12-2013.zip

If anyone could help me I'll be very grateful and maybe there is any chance that someone who has Lenovo Y580 can copy for me newest bios and post here? Laptop was in service but they didn't fix this issue and they didn't restore my old ... Read more

A:random BSODs lenovo y580 win 8.1

Sorry for the delay in responding. There just aren't that many people who do BSOD analysis, so at times we get a bit overwhelmed!

AFAIK, you have the latest BIOS for your system.
Here's a link to it: BIOS Update for Microsoft Windows 7 (32-bit, 64-bit) - IdeaPad Y480, Y580

Out of 17 memory dumps there were 7 different BSOD error codes. The differing error codes are usually symptomatic of a lower level problem within the system. They are usually caused by one of these things:
- borked (broken) hardware (several different procedures used to isolate the problem device)
- BIOS issues (check for updates at the motherboard manufacturer's website)
- overclocking/overheating - You'll know if you're overclocking or not. If uncertain we can suggest things to check.
- compatibility issues (3rd party hardware/drivers)
- low-level driver problems
- or even malware (scanned for when we ask for hardware diagnostics from Initial Hardware Diagnostics or Hardware Diagnostics ).

You can get a head start on the hardware diagnostics if you'd like - they are located here: Hardware Diagnostics

Daemon Tools (and Alcohol % software) are known to cause BSOD's on some Windows systems (mostly due to the sptd.sys driver, although I have seen dtsoftbus01.sys blamed on several occasions).





Please un-install the program, then use the following free tool to ensure that the troublesome sptd.sys driver is removed from your system (pick the 32 or 64 bit system depending on your sys... Read more

Read other 16 answers
RELEVANCY SCORE 57.6

I currently have a Lenovo Y580 Laptop computer with a dvd burner optical drive. I am wanting a blu ray burner where I can watch iblu-ray movies, and occasionally burn files to a Blu ray disk. I have found this drive, but I'm not sure whether it is compatible. It appears there are several different sizes for optical drives. Any idea whether this will physically fit in my laptop? Thanks for your assistance.

http://www.amazon.com/Panasonic-UJ240-Blu-ray-Burner-DVD±RW/dp/B003AXW2YQ
 

A:Blu Ray Burner for Lenovo Y580 Laptop

Unless it is designed for that machine, and it states that it will work, I doubt very much that you can use it. Laptops, in particular, are very proprietary in hardware, and though some few standard pieces may be interchangeable, for the most part, even the connections for optical drives are often the company's own. You'll need to get a drive from the manufacturer or one that they say will work. (Or advice from someone who has actually gotten one to fit.)

Alternatively, you could look into an external case with a USB connection for a BluRay drive. Since most people rarely use them, except for data storage (double-sided ones can hold 50 GB's which makes a great storage medium) or videos, and they are expensive, it may be best to buy just one that can be used on all machines and keep for future ones. I have found no problems with speed playing BluRay over a USB 2.0 connection (In the worst case, the contents could be copied to your hard drive before playing, anyway, though I have never had to do that). And, of course, since a drive that supports all optical media for both reading and burning is only slightly more expensive than those that support fewer types, it is worth the money to get a good drive. Just another idea...............
 

Read other 1 answers
RELEVANCY SCORE 57.6

I'm 11 and using Ubuntu 17.04 Linux on my Lenovo Y580. The problem I'm having seems to effect every operating system I've used on it. The touchpad flips out randomly and sometimes stops working at all. Sometimes it will start to work but only for so long. It's will massively teleport up and down until I start hitting it a little bit, but this is bothering me and hitting it probably makes it worse. Any help would be appreciated. feel free to ask more advanced questions just because I'm 11. I will understand for sure.

Read other answers
RELEVANCY SCORE 57.6

Hi! At the start I'll mention that I am an "IT guy" (actually IT student)  so I have some higher than basic knowledge about the stuff going on with my computers but now even I am lost... I will start from the very beggining of my troubles - that might be a long story!
 
So, one day (quite a bit ago) I was playing League of Legends with friends like I did for over a year after purchasing my Y580 and the in-game "bug splat" error occured. It is not something unusual, it happens to people a lot in this particular game so I was like "meh, again they f*** up something with the patch". Then the system notification told me that "driver stopped working but has recovered" or something like that, which was a first time for me. I googled the problem but before I could read anything the screen froze and I had a first BSOD since installing Windows 8 (and I have it for a year straight now). It was IRQL_NOT_LESS_OR_EQUAL pointing at nvlddmkm.sys, part of Nvidia drivers.
 
 
I started doing obvious things - ran Windows in safe mode, everything was working fine. Then I removed Nvidia drivers completely, including registry entries and stuff. System loded in normal mode and was working - previously the blue screen was appearing before my Windows 8 login page even loaded. I managed to play games on Intel HD GPU and do my usuall stuff without any problems - as expected to be honest.
 
I did a memtest back then, also did it few days ago for 6+ hours wi... Read more

A:BSOD with both GPUs on Lenovo Y580

Hi David
 
Since you are familiar with computers, i will cut the crap and go directly to the troubleshooting. Please follow the below steps.
 
1. First uninstall both "Intel" and "Nvidia" drivers completely from the system. Laptops require tweaked drivers  specifically created for them rather than generic ones. If the Nividia adapter is disabled via BIOS, please enable it.
 
2. Then uninstall "Intel Rapid Storage Technology" driver and "Intel Wireless LAN driver" completely. Current versions are not compatible with "Win 8.1".
iaStor.sys Wed Nov 30 09:09:19 2011
Intel Storage drivers

NETwNs64.sys Fri Dec 2 12:20:55 2011
Intel(R) Wireless WiFi Link 5000 Series Adapter Driver for Windows 7

3. Now update the drivers in the order i posted.
 
IRST : https://downloadcenter.intel.com/confirm.aspx?httpDown=http://downloadmirror.intel.com/23060/a08/SetupRST.exe&lang=eng&Dwnldid=23060&ProductID=2101&ProductFamily=Software+Products&ProductLine=Chipset+Software&ProductProduct=Intel%C2%AE+Rapid+Storage+Technology+(Intel%C2%AE+RST)
 
WLAN : https://downloadcenter.intel.com/confirm.aspx?httpDown=http://downloadmirror.intel.com/23044/eng/Wireless_16.1.1_De64.exe&lang=eng&Dwnldid=23044&ProductID=3062&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+Wi-Fi+Products&ProductProduct=Intel%C2%AE+WiFi+Link+5300+and+Intel%C2%AE+WiFi+Link+5100+products
... Read more

Read other 13 answers