Over 1 million tech questions and answers.

BSOD paged fault in non paged memory

Q: BSOD paged fault in non paged memory

I got this BSOD as I turned on my computer today, I did not install any new drivers or programs recently.

I attached the SF file to this post, not sure if there's any more info I should add.

Thanks in advance.

RELEVANCY SCORE 200
Preferred Solution: BSOD paged fault in non paged memory

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: BSOD paged fault in non paged memory

Hi LewdLove,

BugCheck 50, Could not read faulting driver name
Probably caused by : klif.sys

Your problem seems to be related to Kaspersky Anti-virus or your Anti-virus program, please uninstall and install Microsoft Security Essentials

http://www.microsoft.com/en-gb/security/pc-security/mse.aspx

Run a full system scan once installed

Repost your minidump files back after that.

Cheers

Dave

Read other 9 answers
RELEVANCY SCORE 140.8

Hi,

So a bit of background. I have randomly started receiving BSOD's during normal and gaming use of my PC. This actually started when the weather here in London started to get hot. I do have custom cooling, I have never had overheating issues so I am not sure if it is related. The main OS is on the SSD, which I reformatted to see if it would help. I am now using my old HD with the win7 on it, but it has BSOD on here too.

My PC BSODs many times and will refuse to load BIOS after unless I leave it off for a few minutes (BIOS CHECKSUM errors, I have reflashed the BIOS and still recieve the same error sometimes). I can then either log back on or it would reboot at the windows 7 loading logo. The CPU was originally overclocked by about 10% and unlocked to 4 cores with a the VCORE pushed up by around 10% (1.41vcore). It has also crashed when I reverted back to stock speeds/cores/voltages, but not as frequently.

It has been working flawlessly over the past 6 months, I do not want to replace hardware but I have a feeling it is time for a new CPU/Motherboard.

I would appreciate any insight as to what may be the fault. I have attached the dump file.

thanks in advance.

A:BSOD - Paged fault in non paged area followed by BIOS errors

Thank you for the descriptive post.

Firstly your BIOS is really old:
Code:
BIOS Version: 11/08/2010

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

MEMORY_MANAGEMENT (1a)
# Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 00041284, A PTE or the working set list is corrupt.
Arg2: 00dfe001
Arg3: 00000793
Arg4: c0802000

Debugging Details:
These crashes were caused by memory corruption (probably a driver). Please run these two tests to verify your memory and find which driver is causing the problem.
If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

RAM - Test with Memtest86+

Driver Verifier - Enable and Disable

Read other 4 answers
RELEVANCY SCORE 136.8

This only seems to happen when I plug in my new Logitech C200 Webcam. I tried uninstalling/reinstalling everything to do with the camera, but no luck. I am running Windows 7 Home Premium 32bit. The original OS was Vista HP, but I got an upgrade last year. I recently reformatted my hard disk and reinstalled the OS about 4 days ago, thinking that would fix the problem as well. The laptop is about 1 year old to the day. Also, when restarting from the BSOD, the computer gets to the "Starting Windows" screen, but does nothing from there and I must force it to shut down. Any help that can be provided will be GREATLY appreciated, as this is becoming more frustrating by the day.

A:Paged Fault In Non Paged Area BSOD

  
Quote: Originally Posted by dcwill83


This only seems to happen when I plug in my new Logitech C200 Webcam. I tried uninstalling/reinstalling everything to do with the camera, but no luck. I am running Windows 7 Home Premium 32bit. The original OS was Vista HP, but I got an upgrade last year. I recently reformatted my hard disk and reinstalled the OS about 4 days ago, thinking that would fix the problem as well. The laptop is about 1 year old to the day. Also, when restarting from the BSOD, the computer gets to the "Starting Windows" screen, but does nothing from there and I must force it to shut down. Any help that can be provided will be GREATLY appreciated, as this is becoming more frustrating by the day.


Your Logitech webcam has a hard time with certian HD's read here. Re: Possibly Logitech Webcam driver and WD SmartWa... - Logitech Forums

Read other 2 answers
RELEVANCY SCORE 129.2

My Laptop restart after sometime after giving these errors..
1- Paged fault in non paged area.
2- KMode exception not handled.
(sometimes it gives no.1 error and sometimes it gives no.2 error)
after restarting it gives me error that ..
Windows has recovered from an unexpected shutdown.

Problem event name: BlueScreen
OS version : 6.1.7601.2.1.0.256.48
Locale ID : 1033

I am having this issue from 2 months almost. i have tried every solution.. I have purchased new Ram and then again reinstalled window but still it is giving the same error..
Please reply me as soon as you can..
Thanks..

Read other answers
RELEVANCY SCORE 128.4

Hi,

I have troubles with system stability, crashes and glitches in software.

This computer is for my work (visualisation/rendering).

-Most full system crashes occur when listening music and high demand software (rendering pre computation, rendering, saving files ~400mb).
-I frequently use ~10gb ram for rendering (of 16gb)
-Occasionally before crashing the system will be stuck in a state, music will continue playing for short while, can still navigate between applications but cannot open anything new.
-Crysis will occasionally crash when I played it.

Glitches include;
-Rendering crash (something like error in the pre computation files).
-Recently experienced windows explorer not refreshing files lists/names.
-music pausing or stuttering during intensive application, after closing the application the music will have large breaks between songs and when seeking. (becoming more frequent recently)




? OS - Vista/ Windows 7 ? Windows 7
? x86 (32-bit) or x64 ? 64 Bit
? What was original installed OS on system? Windows 7
? Is the OS an OEM version (came pre-installed on system) or full retail version(YOU purchased it from retailer)? Self installed OEM
? Age of system (hardware) Roughly 6 months
? Age of OS installation - have you re-installed the OS? Orignal installation

? CPU i7 2600k @ 4.1ghz (runs reasonably cool, 58ish under work, 65ish under stress test)
? Video Card HD6950 shaders unlocked with switch
? MotherBoard Asrock Z68 extreme 4 gen ... Read more

A:BSOD, memory management, fault in non paged area

Code:
22528 16/10/2009 5:56:42 PM "C:\Program Files (x86)\Common Files\Seagate\DiscWizard\bootwiz.sys"
22528 16/10/2009 5:56:42 PM "C:\Program Files (x86)\Common Files\Seagate\MediaBuilder\bootwiz.sys"
19008 14/07/2009 11:19:10 AM "C:\Windows\System32\drivers\wimmount.sys"
68096 14/07/2009 10:06:38 AM "C:\Windows\System32\DriverStore\FileRepository\1394.inf_amd64_neutral_0b11366838152a76\1394bus.sys"
19008 14/07/2009 11:19:10 AM "C:\Windows\System32\drivers\wimmount.sys"
68096 14/07/2009 10:06:38 AM "C:\Windows\System32\DriverStore\FileRepository\1394.inf_amd64_neutral_0b11366838152a76\1394bus.sys"
Not sure what those drivers are for but they def out of date
Start with updating your system drivers

Now the error you have mentioned about "memory_management_fault in non paged area" and your dump files are referring to memory corruption as well
I know you have tested your memory but what understood was that you ran the test on all the sticks at same time that actually does not work
so follow this
BSODs can be caused by the hardware issues as well. Most common is the memory corruption. It is very important to run memtest on single stick of RAM at a time in troubled computer. Running test on all RAM sticks at once does not give accurate results
1) Download memtest
Memtest86+ - Advanced Memory Diagnostic Tool (.iso file)
2) Burn that on ... Read more

Read other 9 answers
RELEVANCY SCORE 127.2

i kindly want to know how to solve the blue screen problem of paged fault in non paged area.

A:how do i solve the problem of paged fault in non paged area

Please follow these instructions
http://www.sevenforums.com/crashes-d...tructions.html

Read other 1 answers
RELEVANCY SCORE 127.2

Hi,

This is the first time that I've experienced this error(s) resulting in multiple BSODs. So far, I've tried clearing my cache, removing adware and scanning my files using sfc/scannow but the error(s) still persists. Hope that I can get some advice/help on what I can do to remove the error(s) here. =(

A:BSOD (Memory Management, Page Fault in Non-paged Area)

Hi Xenoda.

First of all, the msinfo32.nfo file included in the zip is not complete. So we are not having some very important info there. Upload your MSINFO32.nfo file again.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.
In the mean time, as the BSODs are memory related (may be a failing RAM or may be any driver passing bad info to the memory), Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the result.
check iaStor in the msinfo32

Read other 3 answers
RELEVANCY SCORE 127.2

All,

I built my PC in 2010. Ever since I have been having intermittent BSOD problems. I've found that if I put the computer to sleep instead of shutting down, when it boots stable, it will remain stable. Otherwise I have BSOD crashes 5-20 minutes after booting. I've run memtest86+ after crashes and had it report errors, but if I remove the RAM, re-insert it, and run memtest, no errors will be reported. It also typically remains stable if I boot after inserting the RAM. Anyway, this is getting to be a pain and I'm trying to work something out. I posted before, and the last piece of advice I received was as follows:

"That is not unusual, electronics are just that way, when memtest86+ shows errors it means there is a problem. Even if it doesn't show any errors the run before and the run after.
An error with 2X4GB installed and then no errors with 1X2GB installed, usually indicates a timing and/or voltage adjustment is needed.

It is still possible that the RAM is faulty, let's try some adjustments and see if it will run stable.

CPUZ is showing your CR at 1T, go to BIOS and select 2T again, save and exit BIOS.
Then check CPUZ Memory tab and see if it says CR 2T.

Go to DRAM timings and change 'cycle time (tRAS)' to 25, this will be the 4th item in BIOS -DDR3 Timings Items.
When changed it should read, for the first 4 timings:
9
9
9
25

Bump your CPU NB voltage to 1.240v or as close as you can get it to that number.
Save and exit BIOS.

Then run memte... Read more

A:BSOD - MEMORY MANAGEMENT and PAGE FAULT IN NON PAGED AREA

Upload your MSINFO32.nfo file.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.
______________________________________________________________________________________________

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck F4, {3, fffffa8004764b30, fffffa8004764e10, fffff800037cb0d0}

----- ETW minidump data unavailable-----
Probably caused by : wininit.exe

Followup: MachineOwner
---------

Read other 6 answers
RELEVANCY SCORE 127.2

Hello,

I built my computer about six months ago and have been having sporadic BSOD problems since day one. I have tried everything I know to do and gotten nowhere. I'm running 7 Professional x64 retail, and this is the first install of it. My computer seems to give me a BSOD within a few minutes of booting up, sometimes it is memory management, other times it is page fault in non paged area. I have ran whocrashed and it has almost always pointed to nfts.sys or ntoskrnl.exe. I've ran memtest 86+ 4.10 for 4 passes and found nothing wrong. Any help would be appreciated. Thanks

- Tom

A:BSOD - Memory Management and Page Fault In Non Paged Area

BSOD errors: 3B {c0000005}, 50 (Pool corruption), 24 (ntfs_file_system).

Update drivers listed bellow and if crashes persist test your hardware - memory, hard disk, video card.
~~~~~~~~

Majority of your most recent crashes were caused by the ATI driver 3B {c0000005}:

atikmdag.sys Wed Apr 07 04:47:17 2010

The latest is August 26 2010. Update it. Uninstall the ATI driver and software completely. Boot to safe mode and sweep ATI remnants with driver sweeper Guru3D - Driver Sweeper.




Update:

atikmdag.sys Wed Apr 07 04:47:17 2010
ATI

SCDEmu.SYS Mon Nov 09 05:27:29 2009
PowerISO

athurx.sys Tue Jan 05 05:23:16 2010
Atheros Wireless CB42/CB43/MB42/MB43 Network Adapter




Ensure that all clocks are set as recommended by the manufacturer. Test your memory and the video card:

RAM - Test with Memtest86+

FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, OpenGL Benchmark and GPU Temperature


You have other recent crashes caused by fileinfo.sys and ntfs.sys bugcheck: 24. Check your hard drives for errors:

Disk Check

HDD diagnostics:

HD Diagnostic




Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [F:\a\Minidump\D M P\101110-20436-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\websymbols*http://msdl.microsoft.com/download/symbols
Executable search ... Read more

Read other 4 answers
RELEVANCY SCORE 125.6

Hi Guys,
I started getting BSODs after installing MSI after burner, os i uninstalled it and ran cc cleaner still i am getting bsods, I installed windows 7 x64 2 days back.

I am using MSE antivirus. and in windows update I am not able to see SP1 update so didnot update yet.

System config in my system specs signature below .

Attaching the error log file.

Hope you guys help me resolve this issue

A:Windows 7 x64 BSOD memory management and page fault in non paged area

two of the dump files seem to be identical?

Anyway, all three dump files point to memory management as you stated in your subject.... did you run memtest86+ ? Have you replaced / checked any hw recently?
Could you try to remove 1 mem stick and see what happens (apart from slowing down )

Read other 4 answers
RELEVANCY SCORE 125.6

Encountered these two bsods within 15mins of each other. Now am currently running memtest86+ with one stick. If i have no errors on either stick, does it still mean my ram is error free? Do i need a change? I've reformatted the PC just 2 months back because of these two same issues too.

A:BSOD: Page fault in non paged area and Memory Management error.

Hi,

Please reconfigure windows to collect the correct info
You want small memory dumps - "MiniDumps"

http://www.sevenforums.com/tutorials/174459-dump-files-configure-windows-create-bsod.html

And here are the instructions for posting:

http://www.sevenforums.com/crashes-d...tructions.html



   Tip
Ensure you click the "GRAB ALL" button and then wait for each window to appear in turn and then click OK

For your RAM, run memtest with all the modules in place to start, if errors occur
then follow section 3 in the tutorial.

Cheers

Dave

Read other 3 answers
RELEVANCY SCORE 120.4

Have sony vaio bx560b. When I boot up the computer, it boots up but after like five seconds I get the 'Paged fault .../' error. I booted into safe mode and this time the paged fault did not occur. So I can conclude that it is software causing the paged fault. But if I go to msconfig, is there an easier way to find the culprit other than doing it step by step, that is unchecking one at a time and rebooting everytime until the culprit is found?

A:paged fault in non paged area

Any new hardware installed lately? ram?

I would disable everything in msconfig startup except for things that refer to sony/vaio and your mouse pad (may need audio too)
I typically leave my startup clean and call the programs as I need them. I guess if you have anti-virus programs that you use,
you would choose to keep them enabled. I'm a rebel.

Read other 1 answers
RELEVANCY SCORE 120.4

Hi there,i keep getting this bsod everytime i turn my pc on and boot into windows,can somebody please tell me what it is,i cannot upload my dmp file is it keeps saying upload failed....here is the imformation in bluscreenviewer,i have also reinstalled 2 times now
thanks
PAGE_FAULT_IN_NONPAGED_AREA 0x00000050 fffff8a0`a0e41878 00000000`00000000 fffff800`02dba426 00000000`00000005 ntoskrnl.exe ntoskrnl.exe+71f00 NT Kernel & System Microsoft? Windows?

please help

A:Paged fault in non paged area

  
Quote: Originally Posted by v3teran


Hi there,i keep getting this bsod everytime i turn my pc on and boot into windows,can somebody please tell me what it is,i cannot upload my dmp file is it keeps saying upload failed....here is the imformation in bluscreenviewer,i have also reinstalled 2 times now
thanks
PAGE_FAULT_IN_NONPAGED_AREA 0x00000050 fffff8a0`a0e41878 00000000`00000000 fffff800`02dba426 00000000`00000005 ntoskrnl.exe ntoskrnl.exe+71f00 NT Kernel & System Microsoft? Windows?

please help


We neeed the acatual DMP file use these to find and upload it. http://www.sevenforums.com/crash-loc...d-problem.html
thanks

Ken

Read other 9 answers
RELEVANCY SCORE 112.4

My computer has started playing up the last couple of days...

It keeps on bringing up a blue screen which says 'page fault in non-paged area"
"Beginning dump of physical memory"
"physical memory dump complete"
then i cant get the computer back on, and i have to switch it off.

Any ideas what causes this and how to fix it?

At one point i thought it was my usb mass storage device, but i removed that from the computer and unplugged it and its still happening...

When i turn my computer on it says "your hardware might not be working properly" but i dont know what hardware they are talking about...

My boyfriends been messing around on here downloading lost or something, could that be it??

Thanks, if anyone can help me. Im worried its going to go off halfway through my work and il lose it all.
 

A:Page fault in non-paged area...Beginning dump of phsyical memory

Read other 16 answers
RELEVANCY SCORE 112

So i was browsing some webpages (local stores for electronical stuff like tvs in my country) and suddenly i got my first ever BSOD in this system. Ive been running this W7 copy since beginning of 2011 without problems
Here is the log

==================================================
Dump File         : 082014-33415-01.dmp
Crash Time        : 8/20/2014 10:23:30
Bug Check String  : PAGE_FAULT_IN_NONPAGED_AREA
Bug Check Code    : 0x00000050
Parameter 1       : fffff8a0`fd015cd9
Parameter 2       : 00000000`00000000
Parameter 3       : fffff800`032ea28e
Parameter 4       : 00000000`00000005
Caused By Driver  : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+80640
File Description  : NT Kernel & System
Product Name      : Microsoft® Windows® Operating System
Company           : Microsoft Corporation
File Version      : 6.1.7601.17514 (win7sp1_rtm.101119-1850)
Processor         : x64
Crash Address     : ntoskrnl.exe+80640
Stack Address 1   :
Stack Address 2   :
Stack Address 3   :
Computer Name     :
Full Path     &#... Read more

A:BSOD: Page fault in non-paged

Dump file http://www.speedyshare.com/TcQGG/082014-33415-01.dmpSpeccy snapshothttp://speccy.piriform.com/results/K00hQdkXcAVrDNAyD07iIL1
*
And as i said this came first time today never seen it before. Last installed program is Nero Burning software version 15!

Read other 8 answers
RELEVANCY SCORE 112

i keep havign bsod's 2-3 times a day when using multiple programs or something heavy such as saint row4 (med settings) i will be upgrading my computer but wondered if I was havign ram problems? any help is appreciated :)

A:BSOD fault in non-paged area

Follow http://www.techsupportforum.com/foru...ed-473665.html please

Read other 1 answers
RELEVANCY SCORE 112

Dear Bleepers! Please help!!!
 
For the past week, I have been getting BSOD Paged Fault in Non-Paged Area (CLASSPNP.SYS). It has happened 7 times now. The first time was when I inserted a flash drive, as was the second, and the third. Either the second or third was actually my USB mouse, but I cannot remember which time it was. The 6th and 7th also had a USB mouse attached to the computer, but the error did not happen when I initially plugged the USB device in as it did most of the other times. I have read that this problem can be caused by faulty hardware, faulty drivers, and RAM going bad. I am usually patient enough to read and find the problems and solutions myself, but this is over my head. Please help. 
 
Some information about my computer to begin with:
 
Toshiba Satelite L15-B1330. Running Windows 8.1. 
 
Ran whocrashed and all 7 dumps are virtually identical.  BCC 0x50 
description: SCSI Class System Dll
Bug check description: This indicates that invalid system memory has been referenced.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time. 
 
I am also running both Mcafee and malwarebytes (have had some recent "attacks" - malware said it successfully blocked outgoing an... Read more

Read other answers
RELEVANCY SCORE 110.8

I am getting BSOD primarily during browser sessions and it always states CI.dll Page fault in a non paged area

Attached are all dump files and system info, per your instructions.

Operating Windows 7 Ultimate 32 Bit
Microsoft (not OEM)
Home built computer - details are in files.

Thanks for your help

Mike

A:Bsod ci.dll page fault in a non paged area

Hi, Mike, and welcome to the forum. I have looked at your four most recent dump. All four show that McAfee was heavily involved in the crashes. McAfee is well known for causing BSOD's on some Win 7 systems, as are many third party security programs. I suggest you uninstall McAfee using this removal tool: Tool. Download and install Microsoft Security Essentials in its place. Make sure Windows Firewall is turned on.

You have some out of date drivers loaded on your system. Some are quite obsolete. They are XP drivers. Outdated drivers can and do cause memory corruption and BSOD's. All four of your dumps blame memory corruption. Update these drivers from the links provided or uninstall the software/hardware they are associated with.





Quote:
AVerBas.sys Thu Jun 11 02:37:46 2009 - AVerMedia Micronas Series (Base) - AVerMedia TECHNOLOGIES, Inc. AVerMedia AVerTV Global - TV Tuners, Media Player, IPTV and Multimedia Products - Support -

AVerCap.sys Thu Jun 11 02:37:46 2009 - AVerMedia Micronas Series (Video Capture), AVerMedia TECHNOLOGIES, Inc. AVerMedia AVerTV Global - TV Tuners, Media Player, IPTV and Multimedia Products - Support -

AVerTun.sys Thu Jun 11 02:37:47 2009 - AVerMedia Hybrid TV Tuner - AVerMedia TECHNOLOGIES, Inc. AVerMedia AVerTV Global - TV Tuners, Media Player, IPTV and Multimedia Products - Support -

nvm62x32.sys Fri Oct 17 17:00:39 2008 - nVidia Ethernet Networking Driver (nForce chipset driver). Drivers - Download NVIDIA Drivers.

n... Read more

Read other 1 answers
RELEVANCY SCORE 110.8

recently I had this BSOD when playing an online game :


Code:
Event Type: Information
Event Source: Save Dump
Event Category: None
Event ID: 1001

Description:
The computer has rebooted from a bugcheck. The bugcheck was: 0x00000050 (0xb91990ea, 0x00000000, 0xb91990ea, 0x00000000). A dump was saved in: C:\WINDOWS\MEMORY.DMP.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

I already tried using memtest to check my memory, but it passed the test with no errors. Also tried changing my nvidia driver to older/newer ones.

using XP Pro SP2. Minidump file also included.
 

A:BSOD page fault in non paged area

This single minidump points to SAFEMON.sys...

You might want to run CCleaner to delete temp files and other nasties. Also run a good spyware/malware cleaner
 

Read other 3 answers
RELEVANCY SCORE 110.8

OS: My OS is windows 8.1
x86: She's a 64-bit
Original OS and OEM: 8.1 was the original OS, and it came pre-installed on the system
Age of System: I am not sure of the exact age of the system, but I bought the laptop new August 2015 if that helps
Re-installed OS: I don't think I re-installed the operating system, but I did use system restore once. 
 
CPU: Intel® Celeron® CPU N2840 @2.16 GHz
Video Card: Intel® HD Graphics (Internal) Motherboard and power supply: NA - it's a laptopSystem Manufacturer: ToshibaExact model number: Satellite L15-B1330Laptop or Desktop: Laptop
 
Thank you again!!!!

Read other answers
RELEVANCY SCORE 110.8

IBM/Lenovo ThinkPad R50e Type 1834 S5G
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Intel(R) Celeron(R) M processor 1.40GHz, x86 Family 6 Model 13 Stepping 8
Processor Count: 1

I'm getting a BSOD at an intermittent but quite annoying frequency, though this seemed to have improved in the last week as they were daily at one point, but has been quite bad this morning (2 so far, which both occurred while updating/installing Lenovo PC Doctor) which tends to make me think/hope it's not capacitor plague.

Memtest comes up clean and Chkdsk seems ok too, as did hardware tests on PC Doctor, so I'm kind of at the limit of my abilities!

Below are several of the recent bugchecks - any help or advice would be much appreciated as I really need this computer to get me through the next 2 weeks for job reasons..

Thanks!!!
0x10000050 (0xff66f000, 0x00000000, 0x804e7428, 0x00000000).

0x10000050 (0xff4bc000, 0x00000000, 0x804e7428, 0x00000000).

0x10000050 (0xff63d000, 0x00000000, 0x804e7428, 0x00000000).
 

A:BSOD - page fault in non paged area

Attached is a zip of my minidumps...
 

Read other 1 answers
RELEVANCY SCORE 110.8

Hi, hope someone can help me?

I have a Dell Desktop that won't boot and displays the BSOD, 'page fault in non-paged area' error at startup. I cannot get into safe mode either (I get a SAM.DLL 'not valid windows image' error).

The PC is a Dell Precision 490 (2Gb ram and appears to be RAID as it has 2 hard disks).

I have managed to get a backup of data from the PC by starting it up with a Ubuntu disk, but I'm not sure what to try next. I can't get into safe mode to try a restore point, nor can I run'Last known good config' and I can't run chkdsk.

Any ideas?

Many thanks

Gavin

A:XP Pro - BSOD, page fault in non-paged area

Hi

1. Using the Ubuntu CD copy the files under c:\windows\minidump to another PC then zip them and attach them to your next post.

2. Run Memtest which you can download from here. Download the ZIP file, extract the ISO and write it to CD using a program like ImgBurn.
Once written to CD, boot your PC with the CD and run Memtest. Allow the test to run through at least 3 passes or until it gives errors. If you have more than 1 memory module run the test on each module separately.

3. Download the Windows XP recovery Console ISO from here. Write it to CD using a program like ImgBurn.
Once written to CD, boot your PC with the CD.
On the first screen press "r" to enter the recovery console.
When asked which Windows you want to log in to type in the correct version (Usually "1")
Enter the Administrator password (if asked) else just press enter if you do not have one.
Then at the command prompt type

Code:
chkdsk c: /r
and enter.
Allow chkdsk to run.
Restart the PC once done.

If you need instructions with screen shots to enter the recovery console see this article.

Read other 8 answers
RELEVANCY SCORE 110.8

Hi guys. I recently built my own computer and just got my first BSOD, a few days into use. The error screen flagged cdd.dll, with the reason Page fault in non paged area.

As a little background, I had been playing Portal 2 while in a Steam voice chat. Also (actively) running was Rainmeter, Skype and Chrome. The crash occurred when exiting Portal 2.

As this is a new build, all drivers should be up to date (grabbed from the manufacturer websites). However any help is appreciated.

I've included a dump of the files the Windows dialog pointed me to on reboot.

A:BSOD: cdd.dll, Page fault in non paged area

Allot of important info is missing from your zip, please follow Blue Screen of Death (BSOD) Posting Instructions to grab all and upload a new report here.

Read other 1 answers
RELEVANCY SCORE 110.8

I am having BSOD's & I ran the blue screen view which displayed the following results. Can you please tell me what's wrong & why am I having these?

A:BSOD Page Fault In Non-Paged Area. Please Help.

Anyone please? :(

Read other 1 answers
RELEVANCY SCORE 110.8

Im getting restarts due to BSOD usually when accessing many files such as during antivirus scans or backups.
Windows 7 x64 ?
- full retail version

- What is the age of system (hardware)? 3 years
- What is the age of OS installation (have you re-installed the OS?) 1 year

A:BSOD Page fault in non-paged area

posting report in this reply

Read other 4 answers
RELEVANCY SCORE 110.8

Hi guys,

A couple of days after i bought my laptop (maybe 4 months ago)I've been experiencing BSOD's. At first it was once a day, until it turns several crashes a day (like maybe 15 crashes). I cant tolerate it anymore so i brought it to a service center. They fixed the issue, they said it's because of a virus. But after a few days, crashes came back, i noticed that when i leave my laptop on without doing nothing(i don't know if IDLE is the correct term)it crashes. I cant remember the error of the first crash but i think its about the memory until yesterday its about "page fault in non paged area". when i turn on my laptop it keeps crashing and crashing and wont go to the desktop unless i use safe mode.

Here are my specs which i copied from the report SF Diagnostic tool generated
Operating System: Windows 8 Single Language 64-bit (6.2, Build 9200) (9200.win8_gdr.130531-1504)
Language: English (Regional Setting: English)
System Manufacturer: Micro-Star International Co., Ltd.
System Model: GE70 0NC/GE70 0ND
BIOS: MSI GE70 0ND E1756IMS Ver:1.0E MSI-Notebook
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz (8 CPUs), ~2.3GHz
Memory: 16384MB RAM
Available OS Memory: 16280MB RAM
Page File: 1572MB used, 31092MB available

Any help will be greatly appreciated. Thanks!

A:BSOD - page fault in non paged area

This device is disabled. Is it deliberate? If so, why?





VirtualBox Host-Only Ethernet Adapter ROOT\NET\0000 This device is disabled.



I would suggest that you uninstall it - but if it's needed, please enable it and update it's drivers. Feel free to disable it again after updating the drivers.

Out of 46 memory dumps there were 11 different BSOD error codes. The differing error codes are usually symptomatic of a lower level problem within the system. They are usually caused by one of these things:
- borked (broken) hardware (several different procedures used to isolate the problem device)
- BIOS issues (check for updates at the motherboard manufacturer's website)
- overclocking/overheating - You'll know if you're overclocking or not. If uncertain we can suggest things to check.
- compatibility issues (3rd party hardware/drivers)
- low-level driver problems
- or even malware (scanned for when we ask for hardware diagnostics from Initial Hardware Diagnostics or Hardware Diagnostics ).

You can get a head start on the hardware diagnostics if you'd like - they are located here: Hardware Diagnostics

Please remove the Western Digital software. It's driver (wdcsam64.sys) dates form 2008 and is known to cause BSOD's in some Windows systems.

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver... Read more

Read other 3 answers
RELEVANCY SCORE 110.8

My laptop has been crashing to a bsod with the message 'page fault in non paged area' for a while now. It seems to do it pretty much randomly. Sometimes it'll only run for a few minutes then crash, others it'll run for hours and have no problems (whether I'm playing games or not).

Dell Studio XPS 1645 laptop
Windows 7 professional x64
Intel Core i7 Q720 processor
AMD Radeon HD 6570M/5700 Series graphics card

File attached.
Any help is appreciated.

Thanks.

A:BSOD - page fault in non paged area

Please upload your msinfo32.nfo file. To get this:
Click on the Start
Type msinfo32 into the Search programs and files box
When it opens, go to File, Save
Save as msinfo32.nfo and save in a place you will remember
Let it finish the process of gathering and saving the system info
Right click the .nfo file, click send to compressed (zipped) folder
Upload the .zip file here.

Read other 3 answers
RELEVANCY SCORE 110.8

Hi,Im getting a Bsod for page_fault_in_nonpaged_area bsod, any help is appreciated, here are the dump logs
 

A:Page fault in non paged area bsod

bump
 

Read other 1 answers
RELEVANCY SCORE 110.8

Hello forums. I have had a BSOD issue for quite sometime, in an area I would say of about a year. It has been very minor, a crash every few weeks, and only when playing games, such as dota 2. Recently, the crashes have been becoming more common place and frequent. 3-4 times a day, and even every time I run specific games. I have always had a suspicion that my ram was going bad, but after running the windows memory test, with only 2 passes mind you; it came up error free. I'm done dealing with this, and i'm going to commit as much time was I need to fix this. I can't have this issue popping up when Uni starts up in a few weeks.

Cheers, Jesse.

A:BSOD page fault in none paged area

you may be right on this one, but you will need to run memtest for more passes than 2, 6-8 is usually the amount you want.

Read other 4 answers
RELEVANCY SCORE 110.8

I've read through previous related BSOD threads and they did not help me. Recently I've been getting more BSODs, with them occurring more often when playing video games, I do also get an occasional crash when I have multiple flash heavy tabs open in Chrome. I have run a memory check, with no faults, I have reseated all my RAM, and done a chkdsk with no errors. Tried posting in the microsoft forums, but they're no help and haven't responded to me in several days. Attached are the necessary files.

My rig:
CPU: AMD FX-8120 8 Core
Motherboard: ASUS Sabertooth 990FX AM3+
RAM: G.SKILL Ripjaws Series 8GB & CORSAIR XMS3 4GB
Graphics: GeForce GTX 560 Ti
HD: SAMSUNG Spinpoint F3 HD103SJ

A:BSOD Page fault in non paged area

Welcome

Software Concern:

Code:
Start Menu\Programs\avast! Internet Security Public:Start Menu\Programs\avast! Internet Security Public
Start Menu\Programs\AVG PC Tuneup 2011 Public:Start Menu\Programs\AVG PC Tuneup 2011 Public
Start Menu\Programs\AVG PC Tuneup 2011\Utilities Public:Start Menu\Programs\AVG PC Tuneup 2011\Utilities Public
Start Menu\Programs\DAEMON Tools Lite Public:Start Menu\Programs\DAEMON Tools Lite Public
Avast! Antivirus is known to contribute in BSoDs. Please uninstall and use Microsoft Security Essentials
(At least to test. You can install it back later if we know it wasn?t causing a problem.)
→ Microsoft Security Essentials - Free Antivirus for Windows

The AVG Tune-up tools seem to be causing some problems for you, note that this sort of tune up utilities can actually cause damage to windows beyond repair. Please uninstall it using the free version of Revo Uninstaller (use advanced mode to remove registry leftover)
→ Revo Uninstaller Pro - Uninstall Software, Remove Programs easily, Forced Uninstall


Code:
PROCESS_NAME: avgnsa.exe
Daemon Tools is a known cause to BSoDs. Please uninstall it right away.

Free up your start-up, keep nothing except the antivirus.
→ Startup Programs - Change

Run the system file checker to scan the integrity of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible
→ SFC /SC... Read more

Read other 9 answers
RELEVANCY SCORE 110.8

I'm posting this in the Win 10 forums because my problem didn't exist in previous versions of Windows. I have been getting a page fault in non paged area bsod for the last two day's. Today was when I tried to download the new Nvidia driver. After a reboot I was able to download it then another bsod when I tried to update the driver. My CPU is not over clocked and RAM shows no errors. Virtual memory settings are set to system managed size on all drives. Only thing I haven't checked is my ethernet driver.

Read other answers
RELEVANCY SCORE 110.8

I recently Formatted my Packard Bell XP (SP3) Desktop using the Packard Bell partition to revert back to factory settings. Everything worked ok and things were running fine until I suddenly got a BSOD, saying there was a corrupt or missing Windows Config file (Not sure if it's connected but I did a forced shutdown prior to this).
I checked all connections, RAM, Graphics etc and all seemed ok, I was unable to get into any recovery or safe mode options so I then used my Packard Bell Recovery DVD to reinstall everything.
The recovery appeared to be going well and all the files loaded but when the system goes through the 'Windows Burnin' stage it goes to the BSOD 'Page Fault in non Paged area'
I have tried reinstalling numerous times but still no go, I've checked HD for errors and tried different RAM and Graphics.
As a last resort I thought I would load the Linux OS into the same partition as XP, it was all accepted and the OS is working fine!
This leads me to believe that my Hardware is all OK?
Is there anyway I can check any corrupt Windows files whilst logged into Linux, or am I obliged to purchase another Windows operating System and hope it installs?
Many thanks.
Chrislo
 

A:BSOD Page Fault in non paged area

Read other 8 answers
RELEVANCY SCORE 110.8

Hi,

Please please please help. I keep getting BSODs with various reasons, the most common is the page fault in none paged area.

I have core2extreme qx6850 with 4gb of corsair ram. I have uploaded the dumps and the performance report.

My OS is newly installed recently.

Hope you can help find out what the issue is.......

A:BSOD Page fault in none paged file

Hello JHaberda, Welcome to SF, sorry it took us long to respond...

You have got a lot of dmps + warnings that could either mean Hardware problems and/or drivers. I suspect the latter so let's start there...

1. Some of your problems seem related to Nvidia (updater) services. As you do not need this all the time, please de-install and use DriverSweeper in Safe Mode to be sure you really de-install. I would do that for all Nvidia stuff. When de-installed, check for your problem (you'll have a rotten safe mode -like screen). If there is no diff... download the latest from nvidia.com and install.

2. Even though a pita... run in Safe Mode for a while, as running on basic W7 drivers succesfully might rule out Hardware...

3. Full scan system with up to date AV and Malwarebytes: Malwarebytes : Malwarebytes Anti-Malware PRO removes malware including viruses, spyware, worms and trojans, plus it protects your computer

4. If still nothing helps... try: SFC /SCANNOW Command - System File Checker

5. You have many warnings on failed / unfinished W7 updates. What's the score on that?

post back results up to here.... from here on we start doing mem and cpu/gpu tests..

Read other 3 answers
RELEVANCY SCORE 110.8

Hello

I received a couple of stop errors while I was playing games recently. The stop error code is

0x00000050 (0xFFFFF7FFF38214B0, 0x0000000000000000, 0xFFFFF800038214F9, 0x0000000000000002)

Also, I have attached my Windows_NT6_BSOD_jcgriff2.

My OS is Windows 7 Ultimate x64 Full Retail.

Thanks

A:BSOD Page Fault In Non Paged Area

  
Quote: Originally Posted by Cieuxlo


Hello

I received a couple of stop errors while I was playing games recently. The stop error code is

0x00000050 (0xFFFFF7FFF38214B0, 0x0000000000000000, 0xFFFFF800038214F9, 0x0000000000000002)

Also, I have attached my Windows_NT6_BSOD_jcgriff2.

My OS is Windows 7 Ultimate x64 Full Retail.

Thanks



Could not read the faulting driver in the single DMP. Three things need to be done

1-Please remove any CD virtualization programs such as Daemon Tools and Alcohol 120%.

They use a driver, found in your dmp,sptd.sys, that is notorious for causing BSODs.

Use this SPTD uninstaller DuplexSecure - Downloads

when you're done you can use this Freeware MagicISO Virtual CD/DVD-ROM(MagicDisc) in its place.

2-Avast. remove and replace with microsoft security essentials

http://files.avast.com/files/eng/aswclear5.exe

Virus, Spyware & Malware Protection | Microsoft Security Essentials
3-Driver verifier






Quote:
I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your compu... Read more

Read other 4 answers
RELEVANCY SCORE 110.8

Recently I've been getting an on and off occurrence of "display driver has stopped responding and has recovered" and BSOD's showing ?page fault in non paged area?. Under normal computer use such as word processing instand messaging, browsing the web and photo editing etc. apart from what I'm just about to explain is fine and the computer doesn't crash, nor drivers un-respond.

However, when I try and run minecraft in far render distance with mods, Optifine (a FPS booster), and far render distance in any architecture (x86 and x64) of Java (taking up a bit more RAM and video processing power), run a Minecraft server (the majority of where my RAM is going), have Firefox open with a couple of tabs or even sometimes just running minecraft and trying to record my screen with Camstasia alone, the PC will lock and jump to BSOD or if lucky the driver stop message will show up. The weird thing is when I check my RAM and CPU usage in task manager I peak around 80-90 at the most. I have also done many stress tests running Prime95 and Intel burn test following guides on the internet how to stress properly, plus memtest x86 with 12 passes which all come back clean.
In my motherboard settings I have changed the iGPU memory to 512MB, so that half a gigabytes is dedicated to the built in GPU. My question is, am I trying to run too much of an internal graphics? I have also tried an old DDR2 512MB GPU and this has also had the "display driver has stopped responding and has r... Read more

A:Page fault in non paged area - BSOD

Hello willowen100.

"display driver has stopped responding and now recovered" and BSOD's showing “page fault in non paged area” are supposed to be different issues. If you post following the Blue Screen of Death (BSOD) Posting Instructions, it will be helpful for us to suggest you something effective.

Read other 6 answers
RELEVANCY SCORE 110.8

Hi I am new here and having a problem with a BSOD and the message comes up page fault in a non paged area. I randomly get a BSOD after the computer comes on. I researched it and I think it is a trojan of some sort. Any info on this/fixes would be extremely helpful. Thank you soo much.
 

A:BSOD page fault in non paged area

BSODs are not generally caused by viri

1. check your anti-virus and anti-trojan results.
2. check your drivers
3. test your ram for at least 7 passes with memtest 86+ (FREE)
4. test your PSU with a PSU tester and multimeter
5. check your registry with ccleaner (FREE)
 

Read other 2 answers
RELEVANCY SCORE 110.8

My computer was fine after fixing the latest blue screen, but now i get a new blue screen. What should i do ?

A:BSOD- Page fault in non paged area

Please remove or update these older drivers that were loaded at the time of the crash. Don't use Windows Update or the Update drivers function of Device Manager.
Please use the following instructions to locate the most currently available drivers to replace the one's that you uninstall OR remove:

Quote:




How To Find Drivers:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.




- - The most common drivers are listed on this page: http://www.carrona.org/dvrref.html
- - Driver manufacturer links are on this page: http://www.carrona.org/drvrdown.html

Here's the older drivers. Please pay particular attention to any dated 2007 or earlier:

Code:
int15.sys Mon Jul 02 22:03:24 2007 - Acer Empowering Technology - http://www.carrona.org/dvrref.html#int15.sys
npptNT2.sys Thu Jan 06 01:43:06 2005 - nProtect GameGuard NPSC Kernel Mode Driver for NT - http://www.carrona.org/dvrref.html#npptNT2.sys
NTIDrvr.sys Tue Dec 21 15:33:14 2004 - NTI CD-ROM Filter Driver by NewTech Infosystems (Acer program) - http://www.carrona.org/d... Read more

Read other 3 answers
RELEVANCY SCORE 110.8

Hey guys. It's me again.

Seems my system is detecting that when one issue is fixed it will put out another one out of nowhere.
This time I am getting an alsysio64.sys BSOD that might be related to ntoskrnl.exe.

Ati Drivers have been giving me a hard time so I wouldn't be surprised if this issue was caused by them at all, this started happening after a Windows scheduled updated ocurred last night.

Whenever the system boots up and loads the desktop it will crash. However when I restart it it will be back to normal, no need to run in safe mode.

I've noticed however... that before the crash occurs, the core temp gadget does not expand to show CPU information. And the second it does, my computer crashes. Upon restart it will load properly, perhaps it is a coincidence. I just find it strange that my system has given me so many issues since I've upgraded to an FM2 platform.

Anyway.. I've attached both of the latest minidumps if you need better information than what I can provide.

Thank you very much

A:BSOD Page Fault In Non Paged Area

Yep, as quickly as I disabled coretemp from startup the BSOD has stopped happening. I rebooted 5 times trying to reproduce the error and it's just like no BSOD ever happened. This is very strange.
The latest windows update might have caused an issue with coretemp drivers?

Read other 2 answers
RELEVANCY SCORE 110.8

Hello
hope someone can be of help

I have an acer aspire 5315 laptop which will not boot into vista basic. while loading windows it freezes with the message

*** stop "page_fault_in_nonpaged_area" 0x00000050
(0x892f000, 0x00000000, 0x810360a3, 0x00000000)

If I try safe mode or last known good configuration it always freezes at the same point. I tried the recovery option, but it still freezes. As a last resort I tried to boot from the Vista dvd but it still gives me the bsod.

thanks

timjcur

A:BSOD page fault in none paged area

be sure to remove any expansion cards and usb devices and try booting again

Read other 2 answers
RELEVANCY SCORE 110.8

Hi,

first time posting here about my bsod problem,
usually, i will get a bsod once a month.
i dont recall installing any specific programs that may cause this,
this started 3 mths ago, and happens once in a while.
attached is the zip file

A:BSOD Page fault in non paged area

bump~~~~~~~~

Read other 3 answers
RELEVANCY SCORE 110.8

Just now I got a BSOD saying PAGE_FAULT_IN_NONPAGED_AREA. It happened when I was restarting because of a Windows update.

This is what the dmp file said -

==================================================
Dump File : 123013-16364-01.dmp
Crash Time : 30/12/2013 16:15:13
Bug Check String : PAGE_FAULT_IN_NONPAGED_AREA
Bug Check Code : 0x00000050
Parameter 1 : ffffffff`ffffffd0
Parameter 2 : 00000000`00000001
Parameter 3 : fffff800`03883dac
Parameter 4 : 00000000`00000000
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+75bc0
File Description : NT Kernel & System
Product Name : Microsoft? Windows? Operating System
Company : Microsoft Corporation
File Version : 6.1.7601.18247 (win7sp1_gdr.130828-1532)
Processor : x64
Crash Address : ntoskrnl.exe+75bc0
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\123013-16364-01.dmp
Processors Count : 8
Major Version : 15
Minor Version : 7601
Dump File Size : 281,496
Dump File Time : 30/12/2013 16:16:05
==================================================

A:Page fault in non paged area BSOD?

Welcome to Seven Forums Zunedge.

This is caused by trying to write to memory instead of the page file on the drive. It is many times just a transient problem and doesn't come back, or that has been my experience.

To be on the safe side follow through with this:
RAM - Test with Memtest86+

Read other 3 answers
RELEVANCY SCORE 110.8

Hey all i just had a BSOD and are wondering why i got it.

it happened when trying to install league of legends

never had one before, 3 years running not one. never had one which is why im interrested in knowing why i did crash

ive attached the minedump i also have a memeory.dmp but its to big to be uploaded

Kind regards Mosser

A:BSOD - Page fault non paged area

Please read these instructions BSOD posting instructions

Read other 1 answers
RELEVANCY SCORE 110.8

Hi all
I sometimes get a BSOD, without any apparent cause.
After BSOD the system reboots normally and nothing is wrong until next BSOD.
I recently had some problems with flash player (maybe video card)

I run Windows 7 Pro 32, Intel Core 2 Duo T5300, Nvidia GeForceGo 7400.

I attach the needed files...

Thanks all in advance!

A:BSOD Page fault in non paged area

Hi again,My first question is. Are you using any antivirus?

Read other 9 answers
RELEVANCY SCORE 110.8

My problem is that every time I boot the computer it boots to the same BSOD Page Fault in a Non Paged Area. I have tried ChkDsk/f/r and swaping out RAM. I have run windows memory diagnostics tool with no errors. I can boot in safe mode but I don't know how to analyze the memory dump to pinpoint the error. Attached is the windows memory dump. Please help!

A:BSOD Page FAULT IN A NON PAGED AREA

System



-
Provider




[ Name]
Microsoft-Windows-Kernel-Power




[ Guid]
{331C3B3A-2005-44C2-AC5E-77220C37D6B4}




EventID
41




Version
2




Level
1




Task
63




Opcode
0




Keywords
0x8000000000000002



-
TimeCreated




[ SystemTime]
2012-09-21T18:25:51.392015600Z




EventRecordID
113521




Correlation



-
Execution




[ ProcessID]
4




[ ThreadID]
8




Channel
System



... Read more

Read other 1 answers
RELEVANCY SCORE 110.8

Several weeks ago my computer was working perfectly well. I took a 3 day vacation and my computer was off for all of those 3 days. When I came back and booted it up for the first time it immediately gave me a cpu overtemp warning and blue screened. After that it has been blue screening once or twice every single day with the new error message "Page fault in non-paged area". It has never again given me a cpu overtemp warning, just the page fault BSOD. The blue screens seem to be completely unrelated to what I am doing at the time. I have blue screened while playing various games, watching netflix, and also while I was doing absolutely nothing with just the desktop up. I googled the issue and tried every fix I could find which was to first update every driver known to man kind, which had no effect on the BSODs. The second suggestion was that it may be an issue with my RAM. I ran a memtest86 test for about 5 hours which produced absolutely zero errors. I also tried cleaning out my computer, dusting it off etc. to no avail. I cannot find any other solutions anywhere.

A:Page fault in non-paged area BSOD

Hi Leur and welcome to sevenforums, I hope you'll enjoy your stay here!

Could you please upload the minidump files located here:

c:\windows\minidumps

Here are some methods that have worked for some people!






Quote:
Method 1 ? Adjust Paging File

To start off, you can try a simple trick with the paging file that fixes the issue for some folks. If the issue is not hardware related, then this page file solution might just work.
First, open the Control Panel and click on System. You can also right-click on Computer or This PC and choose Properties.



Now click on the Advanced System Settings link on the left hand side.



Under Performance, click on the Settings button.



Click on the Advanced tab and then click on the Change button under the Virtual Memory heading.



Finally, we have reached where we need to be. Uncheck the Automatically manage paging file size for all drives box and then select No paging file.



Click OK several times to get out of all the dialog windows and then restart your computer. Once you are back in, follow the exact steps again shown above, but this time select System managed size and check the Automatically manage paging file size for all drives box.
Like I said earlier, this works for some people, but not others so your mileage will vary. If you?re still getting blue screens, keep reading.

Method 2- Check Disk

This error can also occur if your hard drive is either failing or has errors on the drive. O... Read more

Read other 9 answers
RELEVANCY SCORE 110.8

Hi guys!

I've been having a re-occuring Page Fault In Non Paged Area BSOD on my newly built PC. When i had a look at the mini-dumps on Bluescreen viewer they seem to have been caused by different drivers (dxgkrn.eys,win32k.sys) and one common one ntoskrnl.exe.

I've uploaded a zip file containing the required information (the dumps). Please help me

A:Page Fault In Non Paged Area BSOD

Hi atr1.

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats.

Code:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack and Update Center - Microsoft Windows

Report us back for any further BSOD.

Read other 1 answers