Over 1 million tech questions and answers.

dhcp is not enabled for wireless network connection

Q: dhcp is not enabled for wireless network connection

if it is a windows 7 box, try this: http://windows7themes.net/how-to-enable-dhcp-in-windows-7.html
if it is xp, try this: http://www.cs.cmu.edu/~help/networking/dhcp_info/dhcp_xp.html
if it is vista, the first one should work. now linux, is a little bit trickier, but i would have to know the version.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: dhcp is not enabled for wireless network connection

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 92.4

Hey guys,

I have read a lot of forums but nothing has worked. Here is the problem. I was trying to port fwd my RDP and then I ended up getting side tracted and changed my routers password @ routerlogin.com I had no clue it would cause my router to stop working. I know my adapter is fine, because I can connect to the internet via wired connection. My wifi DHCP is not enabled however and I have no clue on how to enable it.

Here is the settings from ipconfig/all

Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.

C:\Users\Alex>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Alex-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Bluetooth Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
Physical Address. . . . . . . . . : 74-2F-68-41-F1-7D
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Wireless LAN adapter Local Area Connection* 11:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter
Physical Address. . . . . . . . . : 06-2F-68-40-E1-77
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled ... Read more

A:Wireless Router Limited Connection (DHCP not enabled)

Here some more information on the problem and what I did (changed the password) http://www.tomshardware.com/forum/38073-42-another-local-area-connection-doesn-valid-configuration
 

Read other 2 answers
RELEVANCY SCORE 79.2

I've had a problem with my computer (audio, video and even mouse movement) stuttering for half a second occasionally, but it only happens when my wireless connection is active. When I disable it, the computer is fine.

I have two computers sharing DSL through a Linksys wireless router and Encore 802.11b wireless Pci cards. Only one computer has the problem. The actual connection is fine. I don't have any idea what's causing the stuttering. Does anybody have any ideas or suggestions? Thanks!
 

Read other answers
RELEVANCY SCORE 78

Hi guys,this is sairam.
Wireless network connection is enabled but still not connected  it showing Red X .If i troubleshoot problem showing like this ( Wireless capability is turned off  Not Fixed)
can you guys please give me perfect solution for this problem.
Thanks&regards.
sairam
 

Read other answers
RELEVANCY SCORE 77.6

I am adding a wireless router to my network, and I don't know if I am supposed to enable or disable the wireless DHCP?

My network accesses the network through a DSL modem. Attached to the modem is my router, which acts as the network's DHCP server. There are about 50 computers connected to it, all wired.

But now I'm adding a wireless router to a part of the network. In the configuration page of the wireless router I can enable/disable it's LAN DHCP server and enable/disable it's WLAN DHCP server. I know that the LAN DHCP server should be disabled, because I already have a DHCP server on the LAN. But do I need to enable the WLAN DHCP server to get wireless to work?

I ask because, to play it safe, I disabled the wireless DHCP server. But my wireless computer, when it connects, fails to get a dynamic IP address.

Thank you for looking.
 

A:Should wireless DHCP be enabled?

Read other 13 answers
RELEVANCY SCORE 77.6

Ok so I'm 59 years old and just started using a computer I downloaded windows 10 update and installed my heritage family tree builder 7.0 and yesterday it wouldn't let me connect to wireless internet HELP WHAT DO I DO TO FIX MY WIRELESS
 

A:DHCP not enabled for wireless

did it work OK with windows 10 - before you install the family tree builder ?

whats the make and model of the PC

lets see an ipconfig /all

ipconfig /all

We would like to see the results from an ipconfig /all - post back the results in a reply here.

If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.

If you do not have another PC - do you have a phone connected to the internet - can you photograph the result and post the image in a reply
Note: you will see entries named Tunnel adapter Teredo Tunneling Pseudo-Interface: we dont need to see that information - JUST the information above those entries

For Windows 8 or Windows 10
To open a Cmd Prompt or an Administrator Cmd prompt from the Desktop.
http://www.bleepingcomputer.com/tutorials/open-an-elevated-command-prompt-in-windows-8/
Use Windows + X Keys together and choose Command Prompt (Admin) from the list.​Or Right click on the windows icon - bottom left hand side - A menu appears - choose Command Prompt (Admin)[/indent]

For windows version, XP, Vista, W7
Hold the Windows key and press R
Now type CMD
Now press Enter to open a command prompt box (A new dialogue box - black with white font, will appear o... Read more

Read other 1 answers
RELEVANCY SCORE 76.8

Ok- am trying to change a BT Home Hub from a wired to a wireless network connection on my girlfriend's computer and having trouble. It picks up the wireless signal, but will not automatically obtain an IP address, and when I enter an IP address manually and disable the wired connection, it no longer connects to the internet.
Here are my ipconfig logs:
FIRST connected with the ethernet cable:

Windows IP Configuration

Host Name . . . . . . . . . . . . : user-d5d1b0573d
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : home

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : home
Description . . . . . . . . . . . : Realtek RTL8169/8110 Family Gigabit
Ethernet NIC
Physical Address. . . . . . . . . : 00-1B-FC-96-AC-9E
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.64
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.254
DHCP Server . . . . . . . . . . . : 192.168.1.254
DNS Servers . . . . . . . . . . . : 192.168.1.254
Lease Obtained. . . . . . . . . . : 17 March 2008 20:00:39
Lease Expires . . . . . . . . . . : 18 March 2008 20:00:39

NOW with the wired connection disabled and wireless enabled:

C:\Documents and Settings\Michael.USER-D5D1B0573D>ipconfig /all

Windows IP Configuratio... Read more

A:DHCP not enabled- wireless problem!

Read other 7 answers
RELEVANCY SCORE 67.6

My Internet isn't connecting.
After troubleshooting, the problem is said to be the following:
"DHCP is not enabled for 'Local Area Connection"
"Local Area Connection doesn't have a valid IP configuration"
It's a wired connection.

------------
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\Jasmin>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
Physical Address. . . . . . . . . : 44-87-FC-91-0C-23
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::f4c6:1fa6:9d0e:e618%12(Preferred)
Autoconfiguration IPv4 Address. . : 169.254.230.24(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 172263420
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-13-6A-B8-E4-44-87-FC-91-0C-23

DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter isatap.{7E55B725-59A1-4170-9A3A-4131798BFA0A}:

Media State . . . . . . . . ... Read more

A:"DHCP is not enabled for 'Local Area Connection"

have you got another cable you can try ?

are other pcs connected to the router and are they working ok - if so ho connected

What firewall / security suite or anti-virus do you currently have on the PC - or you have ever had on the PC in the past - any trial ware - like Norton, kaspersky or Mcafee or any free security suites like zonealarm, AVG , Webroot etc

do a tcp/ip reset
and also try in safemode with networking - see below

Safemode with networking
with a cable connected from PC to router
check the cable - see if there is a light on the router associated with the cable port used , also check if you have a green/yellow light on the PC LAN port (some PCs do not have any lights on the LAN port - so ignore)
- try safemode with networking (sometimes wireless does not work with safemode )
as the PC starts keep tapping F8 - a menu appears - choose
safemode with networking - see if that works

------------------------------------------------------------------------

TCP/IP stack repair options for use with Vista/Windows 7/Windows 8

For Windows Vista/Windows 7
Start> Programs> Accessories> and right click on Command Prompt, select "Run as Administrator" to open a command prompt box (A new dialogue box - black with white font, will appear on the screen ):​
For Windows 8
To open a Cmd Prompt or an Administrator Cmd prompt from the Desktop. Use Win + X and choose Command Prompt or Command Prompt (Admin) from the list.​
In the command prompt w... Read more

Read other 1 answers
RELEVANCY SCORE 65.6

I have a Linksys WRT54G router. 2 my laptops are running Windows XP Service Pack 2.
Router configured as follows
-SSID BROADCAST DISABLED
-WIRELESS MAC FILTER ENABLED
- Permit only PCs listed to access the wireless network (2 MACs entered)
- PASSWORD CHANGED

Despite all these configuration steps network considered as "UNSECURED WIRELESS NETWORK".
What to do to make it secure?
Thank you.
Eugene.
 

A:UNSECURED WIRELESS NETWORK description despite WIRELESS MAC FILTER ENABLED

The reason it says that is because you are not using WEP, WPA, etc to secure the network. If there was a network key required then it would say "secured" if not, it says "unsecured". It does not detect that you have mac filtering, only that you have no network key.

Your network is just as secure with mac filtering(probably more) than using WEP.
If you'd like to test this, just remove one of your mac addresses then try to access the network.

If you still want to secure it using a network key, just look in the section for wireless security, you should find encryption settings. Just enter a WEP key using 64 or 128 bit HEX, I'd not suggest using ascii and you might want to stick to 64 bit if you are using cross branded hardware.
 

Read other 6 answers
RELEVANCY SCORE 64.4

Hi there,at SonicWALL we are getting many people complaining that their wireless clients running Vista are unable to obtain an IP address via DHCP from SonicWALL firewalls.† We are unable to reproduce the problem.† Is this a known issues. Is this fixed or will be fixed?There seems to be similar issues...http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=863519&SiteID=17 CASE 1:



WEP, no WEP... I can connect no problem, but cannot get an ip address
handed out. Vista seems to see it as an unidentified network and will
not connect to it. The same laptop running XP, no issues whatsoever. I
have fresh installed Vista a second time with no avail.

Any other non Vista machine has no issues connecting to wireless.

I can see successful authentication, and DHCP shows nothing has been issued.

FWIW, Vista indicates that it cannot identify the network...

Any suggestions? Anyone else having this issue?

I'm stumped.
I actually have since brought two other laptops online of different makes with Windows Vista with the same results.

SONICWALL - HELP?! :)
CASE 2:





I am glad to see you have the same problem. My HP nc6140 exhibits the
same thing you see. IT works fine with XP, but no joy with Vista on a
Sonicwall TZ170W.My suspicions are it's a MS problem in the IP stack. As a MS partner, I
have used Vista betas since way back - some work, some don't in this
regard. I got the OS to work in RC1 and 2 by loading the original XP
system... Read more

Read other answers
RELEVANCY SCORE 64.4

Thanks for looking, especially for helping
Our network at work is using a D-Link DIR-825 Router. Our laptops, a Dell running XP Pro, and a MacBook Pro running OSX 10.6 (and my iPod Touch), have problems connecting to our wireless router. When I look at the IP address for the laptop or iPod the IP address is 100.100.100.102, Gateway is 101., and the DNS servers are correct, BUT our IP range allowed for DHCP for our office is 192.168.100.150-225.
If I put in a static IP, they connect fine, but DHCP doesn't give me the correct range. What am I missing???
The security is WPA, but I've tried the others and it doesn't make any difference.
Thanks again for looking!
Peace.
 

A:Wireless connection has IP outside of DHCP Range

I have no idea how your laptop is getting that address, you obviously aren't connected to your router with those addresses.

Let's work on the Windows machine, do this stack reset first.

TCP/IP stack repair options for use with Windows XP with SP2/SP3.

Start, Run, CMD to open a command prompt:

In the command prompt window that opens, type type the following commands, each followed by the Enter key:

Note: Type only the text in bold for the following commands.

Reset TCP/IP stack to installation defaults, type: netsh int ip reset reset.log

Reset WINSOCK entries to installation defaults, type: netsh winsock reset catalog

Reboot the machine.
Next, do this.
Select Start > Settings > Network Connections.
Double-click the Connection icon of the connection you wish to modify to open the Connection Status window.
Click the Properties button to open the Connection Properties window.
Click to highlight Internet Protocol (TCP/IP).
Click the Properties button to open the Internet Protocol (TCP/IP) Properties window.
TCP/IP Properties window, IP Address tab
Select Obtain an IP address automatically.
Select Obtain DNS server address automatically.
Click OK to return to the Local Area Connection Properties window.
Click OK to return to the Network Connections window.


Then, do this.
Remove all the stored wireless network profiles and search for the network again. Here's How to Remove Stored Wireless Network Profiles for XP, Vista, and Windows 7
Let us ... Read more

Read other 1 answers
RELEVANCY SCORE 64

Dear All,

Iím having some problems with my Wireless network.
Iím struggling to get my wireless devices to connect to my wireless network. The only way I can seem to do it, is by assigning them an IP address manually Ė otherwise they get given a 169.xxx.xxx.xxx number.
Ideally, I want the devises to get the IP address automatically.

Look at the diagram to see my network.

Itís not a secure network Ė I havenít given the Wireless Router any Mac Addresses. I live in a very remote area, so Iím not bothered about security until I have it all working.

The wireless Router has 4 Earthnet Ports and 1 ĎInternetí Port.

My ADSL Router has all my Internet settings
(Both are Netgear)

My question is: How do I get my Wireless devices to collect automatic IP addresses?

Hope you can help.
Ben
 

A:Wireless Network - DHCP - Help

Read other 16 answers
RELEVANCY SCORE 64

Hello!

I have been able to connect to my wireless router until yesterday it stopped working. I reset my router and that's about as far as I got....now when I try to diagnose connectivity issues it says "DHCP is not enabled for wireless connection 3". Help please!!
 

A:Wireless connection issues and DHCP not enables...

Read other 10 answers
RELEVANCY SCORE 64

I have had a network for almost two years with no problems, and for some reason my laptop has not been able to get online for about a week. It did this once before last year sometime, and I phoned Bellsouth; they said to shut down all the computers and then restart them, and that fixed the problem. It did not help this time.
I have tried everything I can think of.

My laptop is a Sony Viao with Windows 2000. I am using a Linksys router and wireless card with my Bellsouth Westell DSL modem. Someone else set up the network for me, but I don't have contact with that person any more to help me. I will probably phone Bellsouth again, but thought I'd try this, too. I tried Linksys' live chat but they kept getting disconnected.

When I type in ipconfig /release it says it's already released. When I type in ipconfig /renew it hangs a long time and then tells me that the DHCP server is unreachable.

I have three computers. One is this Dell I am currently typing on, with XP, and it is connected directly (wired) and works fine. Sometimes the connection goes out and I have to unplug the modem and plug it in again and then it works fine. That has always been true, though.

I have another Dell, an old one with Windows 98, and it is wireless. We don't use that one very much because it's slow, but it has a wireless connection and sometimes it can't get online, either. It has troubles but sometimes it works, sometimes it doesn't. That's been for ab... Read more

A:DHCP Server unreachable/wireless connection out

Read other 6 answers
RELEVANCY SCORE 63.6

I attach a screenshot from my Network Connections.
"Broadband Connection" seems to be the default but is not enabled.
It's an annoyance since I can't delete it.
The LAN is working fine through my Motorola Surfboard modem and the Broadcom Internet Card.

Incidentally, the rogue device doesn't appear in Device Manager.

A:Network Connection not enabled but set as default

Try updating the LAN driver, might work itself out with an updated driver.

Read other 4 answers
RELEVANCY SCORE 63.6

I have Netgear MA311 PCI wireless adapter and Actiontech DSL wireless router. WEP is disabled and I am running a Unsecured wireless network. Everything runs smooth until something happens that causes the connection to drop and when I check the Network properties I see that it shows my network has suddenly become a Security-Enabled wireless network. The property screens shows it's still a Unsecured network. Rebooting my PC is a frustrating and only temporary cure (it may last anywhere from 10seconds to 10hours)- Can anyone clue me in as to what's happening and please don't tell me to enable WEP because that is not an option.
 

A:Wireless connection drops and changes to security-enabled

Read other 6 answers
RELEVANCY SCORE 63.2

Hey,


I am really suck with my network. I live in a shared house and the landlord seems to have no idea so I'm having to take control, though as you'll quickly notice I dont have much clue either.


We have a Virgin internet router downstairs, provided by thembut the wireless signal hardly passes the room, so there is a cat 5e cable through the wall, upstairs to a router that I have installed DD-WRT on, that we then intend everyone to connect to wirelessly, though some are wired.


I have put the cable from the Virgin box into the Linksys normal bit (not the one that you usually put the internet one in), but I have no idea what to do now. I've tried searching but all I can find is if I was picking up the internet wirelessly, but it its wired. A few things seem to mention DHCP though.


Any help would be amazing please. If you dont have time to write how, or point me in the right direction, then just the name of what I'm trying to do would be much appreciated, but any help would be great.


Thanks a lot,

Andy
 

A:Wireless DHCP network problems

one approach: multiple routers

I've written this several times, so I'll refer to a common post here.

Ask specific questions and I'll reply
 

Read other 1 answers
RELEVANCY SCORE 63.2

I have bridged a builtin nic and a wireless internet connection in windows networking. (select both connections and , rightclick and select bridge)

I put a cable in my nic and it then connects to my laptop for surfing.

The laptop surfs fine.

I now need this connection for a device, but when I plug the cable into the device it is not able to get the dhcp server information , so it wont work.

How can I get this bridged internet connection to pass on the dhcp server information to the device?

So far I have to plug the cable into my router , and then the device gets the dhcp and works but this is a big mess in my room so I need to do it the other way.

What are the solutions?

A:Bridging a Wireless connection to a nic in same computer and dhcp info

Quote:





Originally Posted by bob jones


I have bridged a builtin nic and a wireless internet connection in windows networking. (select both connections and , rightclick and select bridge)

I put a cable in my nic and it then connects to my laptop for surfing.

The laptop surfs fine.

I now need this connection for a device, but when I plug the cable into the device it is not able to get the dhcp server information , so it wont work.

How can I get this bridged internet connection to pass on the dhcp server information to the device?

So far I have to plug the cable into my router , and then the device gets the dhcp and works but this is a big mess in my room so I need to do it the other way.

What are the solutions?




This seems like it would be a simple answer from a techie.. The network cable is passing the world wide web,(google .etc.) but is not passing the dns server information.

Read other 1 answers
RELEVANCY SCORE 63.2

This may be a dumb question.. but how can I make my wireless network "Security-Enabled" so that users need a password to be able to connect to it.

Thanks,
Melissa
 

A:Security-Enabled Wireless Network

Please don't post duplicate threads - http://forums.techguy.org/networking/586584-security-enabled-wireless-network.html
 

Read other 1 answers
RELEVANCY SCORE 63.2

This may be a dumb question.. but how can I make my wireless network "Security-Enabled" so that users need a password to be able to connect to it.

Thanks,
Melissa
 

Read other answers
RELEVANCY SCORE 63.2

I apologize in advance, since I'm sure this is has been discussed before, but I just don't understand what to do with the wireless network. I would like to make it security enabled but have no clue where to start.
There is one desktop and one laptop in use. I would really appreciate a simple step by step walkthrough. Thanks.
 

A:security enabled wireless network

Most routers come with a user manual on a CD; and usually the user manual is also available on the manufacturer's web site.

Login to your router, navigate to the wireless section and enable encryption. Preferably WPA(2)-PSK and assign a passphrase. Then connect your wireless device(s), supplying the same passphrase when prompted.
 

Read other 1 answers
RELEVANCY SCORE 63.2

I am trying to set up my wireless network with security. I was reading anothre post that has helped me through most of it. I do not have a desk top connected to the router. I have tried to use the flash drive and it recognized my computer and my roommates but I cannot connect it to the wireless router because there is no USB on the router. What do I do next?
 

A:security enabled wireless network

A wireless router will not have a USB socket, the wireless capability is built in.

Open a command prompt ( All Programs > Accesories > Command Prompt) and type in "ipconfig /all" and paste the results here. Ipconfig is a command that shows you your networking configuration.
 

Read other 1 answers
RELEVANCY SCORE 63.2

This may be a dumb question.. but how can I make my wireless network "Security-Enabled" so that users need a password to be able to connect to it.

Thanks,
Melissa
 

A:Security-Enabled Wireless Network

Read other 16 answers
RELEVANCY SCORE 62.4

So I have a small business I do IT work for. They are using Engenius WAPs for wireless which support multiple SSIDs and VLAN. DHCP is handed out by a Win2K8R2 server.

Now they want to set up a guest wireless network that only has access to internet and none of their internal resources. Problem is they need connectivity to the DHCP server. They have all dumb switches that don't support VLAN tagging.

I haven't worked much with VLANs, but I understand the concept and I'm trying to figure out if there is a way to provide what they wish (which is pretty straightfoward) without either

a. having to change the WAPs for something that have built in DHCP (that can be enabled on a per SSID basis) or
b. replace the dumb switches with switches that support VLANs

Any advice greatly appreciated. Thanks!
 

A:guess wireless network dhcp and vlan

Read other 10 answers
RELEVANCY SCORE 62.4

Hello,

An electricity outage somehow messed up my linksys router.

Basically, I can only connect to it with a wireless device if I do a static assign for the primary gateway as 192.168.1.1, the usual subnet of 255.255.... and a static IP like 192.168.1.110 which is within the range of the linksys router.

Like this I can connect fine.

Yet, setting the IP to automatic in Windows XP, it does not recognize the router, and the autodiscovery does not work. I could live with this if I only had a laptop, but I also have an SPH101 Netgear Skype phone, whcih recognizes the network but cannot connect. I suspect because of this IP issue.

Could you help me resolve this issue so that my wireless devices can connect with autodiscovery and DHCP again?
 

A:Linksys WRT54GL wireless connection issue (DHCP related)

Read other 12 answers
RELEVANCY SCORE 62.4

I have a gateway 450rog laptop running windows xp professional. last week i moved from one apt to another. time warner cable came and setup the internet & put a security password on the router, however i cannot connect.

I am able to connect to unsecured wireless networks w/o any problem, but when i try to connect to the secured router in my apt....instead of getting the prompt to type in the password...i get an error message stating that the "windows is unable to connect to the selected network. the network may no longer be in range"

the network and router are sitting right beside me and i have another laptop hooked up to it....so it must be in range.

does anyone know how to fix this problem?

i've had this problem in the past but was able to fix it with the help of this board, hopefully you all can help again.
 

A:Help - Cannot Connect 2 Security Enabled Wireless Network

Read other 8 answers
RELEVANCY SCORE 62.4

My Toshiba laptop running Vista as an operating connects just fine to the wireless network at my house. However, I will soon be house-sitting at a house that also has security-enabled wireless available. I connect just fine at my house, but whenever I put in the password at their house it says that that it cannot connect because of a timeout. I can't figure out what the problem is, because I recently went to the public library that has wifi and got on just fine. Does anyone have any idea why in the world it will not connect to this specific wireless router??
 

A:Connecting to security-enabled wireless network

Read other 9 answers
RELEVANCY SCORE 62.4

Last night I installed a LinkSys Wireless G Broadband w/ Speed Booster router to work with a used PC I bought from a friend that already had the proper adapter PCI card installed.

Everything appears to work just fine - expect the the hard drive is accessed every two seconds and I'm concerned that the hard drive will wear out. When I disable the wireless adapter card (going back to wired connection), the hard drive access stops - only to resume again when I re-enable the adapter.

I did not get the software CD that may have come with the adapter card when I got the used PC and so, I'm unclear if there is an installation step that might be required for the adapter. Again, the wireless connection appears to work great when enabled.

Anyone have ideas as to a setting or something that I can check to stop the repeated and frequent hard drive access?

Thanks!
 

A:Repeated Hard Drive Access w/ Wireless Connection Enabled

The hard drive will not wear out.

Since it is an old computer it might have too little RAM and it needs to access the swapfile to do background tasks. Try disabling some resident programs and see what happens. It may also be your firewall software writing logs or something similar.
 

Read other 6 answers
RELEVANCY SCORE 62

Hello, I have been experiencing some problems on my home network. I have problems with AOL, FTP and steam online games like counterstrike, team fortress 2, and day of defeat. I get these problems about 3/4 of the time, and 1/4 these programs will work.

When I sign into AOL I get a message saying "Could not connect to authentication server:
Windows socket error #10060". On FTP about half of the time I am not able to connect, and I the connection keeps timing out. On the steam games, when I open up the game dialog, I don't get the auto-retry option that is normally available. I tested these problems on other computers at my house and the same behavior occurs.
 

A:Solved: Problems on a DHCP wireless home network

Read other 10 answers
RELEVANCY SCORE 62

Hi,

I don't know much about computers, but I am having lots of problems with my wireless internet connection. It was working fine up until a few weeks ago where the internet would connect and then disconnect and the usual error message would come up. I ran diagnostics and all tests were fine except for the PING test which failed: the message was response: DHCP server no response default gateway.

I dont know what this means, but I looked it up in this forum and copied did the start-run-cmd box, ipcongif test:

Windows IP Configuration

Host Name . . . . . . . . . . . . : Silverstone
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) Centrino(R) Wireless-N 1030
Physical Address. . . . . . . . . : 4C-80-93-40-D7-F1
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::10a4:41dc:24ed:b5d0%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.0.3(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : 09 September 2012 09:36:34
Lease Expires . . . . . . . . . . : 09 September 2012 12:17:35
Default Gateway . . . . . . . . . : 192.168.0.1
DHCP Server . . . . . . . . . . . : 192.168.0.1
DHCPv6 IAID . . . . . . . . . . . : 1895630... Read more

A:Wireless internet problem - connection keeps crashing- DHCP server no response

Read other 16 answers
RELEVANCY SCORE 61.6

Hi, having scoured your incredibly useful forum, I'm at a loss so....

I have a Dell Studio 1737 which until yesterday was fine. however today there is a red cross through the wireless signal and there are no wireless networks visible.

I know my hub is working fine as my other laptop and various phones/tablets etc all connect fine. When I click on the netwok adapter settings both the Dell wireless 1397 WLAN Mini-card and the Microsoft Virtual WiFi Miniport Adapter are enabled and in properties both say that "This device is working properly"

Have tried pushing wireless button and fn F2...... (both seem to do nothing)...

Have run AVG antivirus scan, Malwarebytes scan and Ccleaner....

Have tried updating drivers for both adapters....successfully..

Have tried pinging various with no joy at all....nothing transmitting or recieving there...

Have tried resetting winsock...

Have tried safe mode and clean boot....

Have deleted Bonjour and most of the Dell Bloatware.......

Totally out of ideas now....PLEASE HELP!!!!

Kind Regards,

Tony
 

A:network adapter says its enabled and working properly but no wireless!!

Is ethernet working OK on that PC?

Please attach a screen shot of the Networks page (don't collapse the Radar, Connection or Signal History) of the Xirrus Wi-Fi Inspector. If you don't have a satisfactory email address (e.g., from your ISP) you could try http://www.pcworld.com/article/231780/xirrus_wifi_inspector.html. If you need help with a screen shot see TSG Posting a Screenshot. FWIW to take screen shots with Windows 8 or 7 or Vista I prefer to use the built-in Snipping Tool.

Identify your network if it shows and is not obvious. Also show ...

Open a (black) Command Prompt window:
Hold the Windows logo key and press r; in the Run box type cmd and click on OK.

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

[Press ENTER after each command.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

Read other 1 answers
RELEVANCY SCORE 61.6

Okay, in the Wireless Network Connections display window where the wireless networks in range are displayed.. The network at my home is listed as security-enabled. This is incorrect though, I logged into my router via 192.168.1.1 (it's a Linksys) and checked the security settings. The WEP key/security is disabled.

So now it's asking me for a network password when there isn't even one set not allowing me to gain wireless access. It's not a problem for me to connect via a hard wire. I just can't connect wirelessly (nice word, eh?)

Any ideas?

A:Wireless Network Connections display says security-enabled, when it's not.

When you logon to your router does it allow you to enable WEP? If it does then enable it and select an encryption key. You would then have to reconfigure the wireless setting on your PC to match the security settings on your router. (Select WEP encrytion and input the appropriate key).

Read other 4 answers
RELEVANCY SCORE 61.6

I've been using an unsecured wireless network for the longest time, and just now got around to trying to set it up to work with WPA-PSK and haven't been able to get it working properly.

I have a cable modem and a D-Link DI-524 802.11g/2.4GHz router which is connected to my desktop (running Windows XP SP2). My laptop is running the same OS and has an Intel Pro Wireless 2200BG network connection. Whenever I enable WPA security, my laptop can't connect to the network. It usually hangs forever at "acquiring network address" but occasionally will finally skip to "limited or no connectivity".

I've triple checked the key to make sure there wasn't an error when I was copying and pasting it. I've tried typing it in manually but it hasn't made a difference. This is what the command IPCONFIG /ALL dialogue looks like:
Code:
Windows IP Configuration

Host Name . . . . . . . . . . . . : your-k8l3qthb26
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/Wireless 2200BG Network
Connection
Physical Address. . . . . . . . . : 00-0E-35-3B-78-55
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Y... Read more

A:Solved: Cannot Connect to Wireless Network When Security is Enabled

Read other 16 answers
RELEVANCY SCORE 61.2

Hi all,

I recieved my new notebook clevo170hm yesterday. The laptop was working fine for 2 days, but today it started behaving weirdly when I tried connecting it to the LAN internet and it said "no network access" and "unidentified network". I remembering installing a windows update and after a reboot this error came up, before the update things were good . Here's the event viewer error description:

Code:
Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x0090F5C1E007. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
Apart from that I tried connecting to my wifi network, still gave me the same error " unidentified network". Here is the cmd command result for "ipconfig/all"

Code:
C:\>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : #####-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : JMicron PCI Express Gigabit Ethernet Adapter
Physical Address. . . . . . . . . : 00-90-F5-C1-E0-07
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes... Read more

A:Network connection error 0x79, IP not assigned by DHCP. Event ID 1001

Forgot to mention, I do not have a router or modem. I am living in university accommodation hence all I got on the other end is a n ethernet socket.

Read other 1 answers
RELEVANCY SCORE 61.2

I am using Microsoft driver for the above device. Drivers loaded ok, device manager seems to think it's fine. Device seems just fine (blue light flashing as it should). Anti-virus/external firewall (Zonealarm Exteme) etc all shut down (to find problem).
Primary ethernet connection disabled. Network and sharing Center (Change adapter settings) allows me to enable, says enabling, then enabled, however it never changes status and remains disabled.
Netgear driver (latest for win7 64 which I use) installs fine until final part 'detecting adapter' which fails - never gets there and needs to be forcefully terminated. I've removed the Netgear software entirely.
I've changed USB ports and done just about as much as I can. From a management point of view I hate windows7. To get to simple information it is far more difficult than previous OS's. As an example, I have no idea how to get my OS version number. I know
it is Windows7 64Bit Home edition but thats all I can say.
The network adapter works perfectly under XP-sp3 and this is dual-boot machine so hardware is obviously identical (apart from SSD boot for Win7 and HDD for XP).
Any help appreciated - or any questions I can answer to help me out!
Thanks, Dave.

A:Cannot enable wi-fi device (Netgear WNA3100) network connection although message is 'enabled'

Well, there are some service dependencies, but they may or may not have any affect on the device driver itself.  Still, you could check and make sure they're running:
WLAN Autoconfig service
RPC service
EAP service

Read other 20 answers
RELEVANCY SCORE 60.8

Hello,
On the TCP/IPv4 , i set my IP address to be obtained automatically as well as the DNS sever address, technically the DHCP should be enabled, but when i verify using the cmd (ipconfig/all) the result is (DHCP............NO) only for the Tunnel Adapters, but YES, for the other ones, is that normal? I am having a problem with my ADSL dropping each time my homephone rings or when i make a call from it, the network icon on the taskbar gets the yellow sign, then i right-click on it and click "troubleshoot problems" > result : "DNS server isn't responding" , by the way, i'm using a filter with dual outputs, one for ADSL and one for the homephone, i used 3 different filters from 3 different manufacturers but the problem never gets solved, someone told me it might be the cable being an old non- optic fiber, i'm fed up i need help!
thanks
 

A:DHCP is enabled but it says NO on the cmd

in the same spot where you set the dhcp on ipv4, the button below that is for dns. set the dns server to 8.8.8.8 and the one under that to 8.8.4.4. those are googles public dns servers. see if that helps, it should fix the dns server issue, but i wouldn't think that would cause your problems with dropping service when a call comes in. but i'm no expert on dsl internet.
 

Read other 3 answers
RELEVANCY SCORE 60.8

i am currently using my laptop and internet dongle to run my xbox live but yesterday i had a pop-up saying my network wouldnt connect.
i have tried the advice the xbox support team gave me but all the advice is concerning routers and modems and as im using a dongle it dosnt apply to me. i cant seem to enable my DHCP and i dont have a default gateway.

this is what comes up

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\gary>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : User-HP
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
PPP adapter T-Mobile UK:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : T-Mobile UK
Physical Address. . . . . . . . . :
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 178.109.138.59(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . : 0.0.0.0
DNS Servers . . . . . . . . . . . : 149.254.230.7
149.254.199.126
NetBIOS over Tcpip. . . . . . . . : Disabled
Wireless LAN adapter Wireless Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8188CE 802.11b/g/n WiFi Adapte
r
Physical Address. . . . . . . . . : AC-81-12-97-9E-65
D... Read more

A:dhcp not enabled

Did you manually enter those settings for the T Mobile card?
 

Read other 2 answers
RELEVANCY SCORE 60.8

Hi I am trying to install NTL broadband on my friends pc,
The problem I am having is that it wont install using usb connection, I get an error saying that Device is malfunctioning or disabled.
Also the connection icon in the task bar keeps switching from connected and cable unplugged.

I then tried to connect to an ethernet card, I now get an error As follows.

Dhcp is not enabled on nic National semiconductor dp8315-based pci fast ethernet adapter error code 23.

I HAVE A NETGEAR EA311 ETHERNET CARD installed.
I have checked the network connection properties and dhcp is enabled in there.

Please help this is driving me nuts.
Thanks gratz
 

A:DHCP not enabled

Anyone please answer
 

Read other 2 answers
RELEVANCY SCORE 60.8

Hello, I was just wondering if anyone could help me? I have a 3com router which is connected via ethernet to a pc, this connection works fine. I also have two laptops which are trying to connect to the router via wireless. Each computer connects for about 1 minute and then the connection becomes limited or no connectivity.

I have tried assigning the ip address and dns manually which does not work and also tried rebooting the router

Does anyone have any ideas on how i can solve this? I am not sure how to access the router to reconfigure anything

the ipconfig (when the internet is working is)
Windows IP Configuration

Host Name . . . . . . . . . . . . : KatieMillman
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Mixed
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/Wireless 2200BG Network
Connection
Physical Address. . . . . . . . . : 00-16-6F-3E-F9-8F
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Autoconfiguration IP Address. . . : 192.168.1.8
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . : 192.168.1.5
DHCP Servers.......................192.168.1.5
DNS Servers ..........................192.168.1.5
Lease Obtained 09 August 2008
Lease expires 09 August 2008
Ethernet adapter Local Area Connection:

Media State . . . . . . ... Read more

A:DHCP not enabled

Please supply the following info, exact make and models of the equipment please.

What country are you located in.
Name of your ISP (Internet Service Provider).
Make and exact model of the broadband modem.
Make and exact model and hardware version of the router (if a separate unit).
Model numbers can usually be obtained from the label on the device.
Connection type, wired or wireless.
If wireless, encryption used, (none, WEP, WPA, or WPA2)
Version and patch level of Windows on all affected machines, i.e. XP-Home (or XP-Pro), SP1-SP2, Vista, etc.


Please give an exact description of your problem symptoms, including the exact text of any error messages.

If you're using a wireless connection, have you tried a direct connection with a cable to see if that changes the symptoms? Have you disabled all encryption on the router to see if you can connect that way? Have you connected directly to the broadband modem to see if this is a router or modem/ISP issue?

If there are other computers on the same network, are they experiencing the same issue, or do they function normally?


On a working and a non-working computer, I'd also like to see this:

Hold the Windows key and press R, then type CMD (COMMAND for W98/WME) to open a command prompt:

Type the following commands:

PING 206.190.60.37

PING yahoo.com

NBTSTAT -n

IPCONFIG /ALL

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If you are on a machine with... Read more

Read other 1 answers
RELEVANCY SCORE 60.8

Hi
I have 2 laptops and a wifi connection. My laptop never connects to the net. When i try to trouble shoot i get an error msg "DHCP is not enabled"

Have tried

1 . reboot,

2.checked to see if DHCP is enabled through (Components services)services (local)...DHCP client is running.

3.Tried restarting DHCP client.

4.Also checked in CMD if DHCP is not enabled.

Have got win-7 on my laptop ,
C:\Users\Ivan>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : VAIO
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Wireless LAN adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Atheros AR9285 Wireless Network Adapter
Physical Address. . . . . . . . . : 00-26-5E-FA-EE-13
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Marvell Yukon 88E8057 PCI-E Gigabit Ether
net Controller
Physical Address. . . . . . . . . : 00-24-BE-78-6E-F4
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 32:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffi... Read more

A:DHCP not enabled

this is the problem on the wireless connection
DHCP Enabled. . . . . . . . . . . : NoClick to expand...

needs to be set to yes
to do that
Setup to Automatically get an IP and DNS (DHCP) - for Windows 7
http://windows.microsoft.com/en-US/windows7/Change-TCP-IP-settings
From a TerryNet post
To configure a dynamic IP address on your Windows Vista or 7 computer:

1. Click Start.
2. Select Network, then Network and Sharing Center, and click Manage network connections or Change adapter settings from the list of tasks.
3. Right click the connection of interest and click Properties.
4. Select Internet Protocol Version 4 (TCP/IPv4) from the list and click the Properties button.
5. Select Obtain an IP address automatically.
6. Select Obtain DNS Server address automatically.
7. Click OK.
8. Click Close.Click to expand...

------------------------------------------------------------------------
 

Read other 1 answers
RELEVANCY SCORE 60.4

I have a computer that would not see the hard drive a few days ago. Got a new hard drive and did a clean install of windows and restored the rest of the files with Carbonite. A few days later the computer would not boot into windows again. So this time i reformatted the new drive and stuck it into an identical PC I had.

Now its been 3 days and the computer started to run EXTREMELY slow after booting up. In safe mode its perfectly fine. I have ran multiple virus scans from malware bytes, avast and superantispyware, nothing found.

After some trial and error with turning services off I found that if i disable the local area connection in safe mode then boot into windows normally it runs fine(without the internet connection of course). I have brought the PC to a different location and even put the hard drive in the original computer and it is still having the same issue.

Any ideas on what i can try?

A:Running slow with network connection enabled, runs fine in Safe mode

Welcome !
Is the PC very slow right away after a cold boot or does it happen over a certain amount of time?

Download | Process Explorer.

Immediately after a Cold Boot launch Process Explorer (if you have a short list,
click "Show Processes From All Users" the right most option in the top bar):
Arrange "Working Set" (by clicking on the top of that column) Take a screenshot.
Arrange "Private Bytes" (by clicking on the top of that column) Take a screenshot.
Arrange "CPU" (by clicking on the top of that column) Take a screenshot.

After 30 minutes (or the maximum amount the system hold its self together):
Arrange "Working Set" (by clicking on the top of that column) Take a screenshot.
Arrange "Private Bytes" (by clicking on the top of that column) Take a screenshot.
Arrange "CPU" (by clicking on the top of that column) Take a screenshot.
Upload the screenshots in a .zip file arranged in folders please.

Read other 9 answers
RELEVANCY SCORE 60.4

I had Dell over today. They replaced the mother board and I am having the same problem. Wireless works fine. Wire to NIC card says unplugged and enabled (blinking) I can't get it to work.
Dell then told me it may be software and asked me to reload XP... I did that too, a full install... took me all night to get this laptop D600 Latitude back to normal. I am still getting this blinking thing under network connections. Local area connection (status) blinkes Network cable unplugged and enabled. I am using a known good cable. I rebooted modem, computer and did all I can do.
Have any ideas? Wireless works fine but daughter has a weak signal at college and needs direct connect.

Thanks,
Steve
 

A:Local area connection (status) blinkes Network cable unplugged and enabled.

When the motherboard was replaced, was the NIC driver re-installed?

Since its a laptop, is the NIC integrated with the motherboard, or is it a seperate card?

In Windows Device Manager, are there any question marks or exclamation points next to the NIC / Ethernet Adapter?

Since both motherboard and Windows were replaced / re-installed, that takes out a lot of possibilities.
 

Read other 3 answers
RELEVANCY SCORE 60.4

Hey guys,

Just a quick question:

I have an MN-700 Microsoft Router. It works perfectly, except for one flaw. It won't renew the IP addresses for any devices connected to it wirelessly. I have two Inspiron 1525s, and two Xbox 360s connected to it. I have had to set all of their IP addresses manually, because the router will not hand them out automatically. On the laptops, if put to "Set IP Address Automatically", the laptop merely states "IP Address Invalid" and shows 0.0.0.0 for every parameter. Any help would awsome.
 

A:DHCP Enabled but No Renewal

Read other 8 answers
RELEVANCY SCORE 60.4

Windows 7 laptop connects to server, internet, and to other computers on network. Server can ping laptop and laptop can ping server. Using cmd and ipconfig /all in the laptop no ip address is shown. How can this be since it accesses the server? DHCP enabled says no but network card controls show it is set for auto for ip and dns under v4 tcp/ip in protocols. Is there some other method of enabling DHCP in Windows 7? Since it works, maybe I should not worry about it. Thanks for any help.

A:DHCP shows not enabled

Are you a administrator? Is the command prompt running with administrator rights?

Read other 2 answers
RELEVANCY SCORE 60.4

I am having a similar problem with my wife's laptop. We just got a new wireless gateway modem from AT&T. It works great on mine but while it says he's connected to the network, I can't get any web pages to come up. I tried some of the other solutions provided and I notice that when I run the cmd stream it says the DHCP is not enabled. But when I go into Admin tools and services it says the DHCP has "started"? I do see that both our computers are using the same IP address. Her computer says under "connection status" under "address type" "Maunally Configured" while mine says its configured by DHCP. Any ideas? Thanks!
 

A:Solved: DHCP not enabled?

Read other 10 answers
RELEVANCY SCORE 60.4

We have windows server 2003 as dhcp server .
we have network of 200 dhcp enabled pc.
Now a days many of our pc's are getting Ip address 192.168.1.255.
how to resolve this problem.

Thanks and Regards
Umesh
 

A:Dhcp enabled pc's gets Ip address 192.168.1.255

Read other 14 answers