Over 1 million tech questions and answers.

Solved: wired-wired file sharing works, wired-wireless doesn't

Q: Solved: wired-wired file sharing works, wired-wireless doesn't

I've got a regular desktop pc and a laptop. Both are running Windows 7.

If both machines are wired, file and printer sharing works like expected. If the laptop is on the wireless, things go sour...

The machines don't see each other, I can't ping the laptop from the desktop or vice versa. Strangely enough, if I ping the desktop from the laptop by IP address the desktop will reply. At that point the desktop will see the laptop too and sharing (file, printer & media) works fine. But if the connection is idle for a couple of minutes they won't see each other anymore.

I've tried all kinds of things: disabled IPv6 on both, reconfigured file and printer sharing, disabled the firewalls on both. But none of these changes have had any effect whatsoever. I have also tried to give everything the same name (SSID, workgroup and network name on the desktop) but that had no effect either.

More info:
- Wired and wireless clients are on the same subnet.
- The router is a Linksys WRT-350N
- AP isolation is disabled
- uPnP is enabled on the router

Does anyone have any clue how to fix this?

RELEVANCY SCORE 200
Preferred Solution: Solved: wired-wired file sharing works, wired-wireless doesn't

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Solved: wired-wired file sharing works, wired-wireless doesn't

Read other 10 answers
RELEVANCY SCORE 152

I have a problem much like chrisg's I have a Webstar (Scientific-Atlantic) Modem, Netgear RangeMax 240 wireless router and Netgear USB on the computer that is running wireless. I cannot conect to the router (192.168.1.1) to change or set up on the wired computer. The wirless works fine. I have trouble connecting to internet and must retry many times until it may or may not work. I thought maybe the 240 was sucking all my juice, so I turned it down to half, but I still cannot load my router page - it cuts out. I did what you asked of the last guy:

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\John>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : downstairs
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection 2:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : NVIDIA nForce Networking Controller
Physical Address. . . . . . . . . : 00-14-2A-C8-51-34
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
IP Address. . . . . . . . . . . . : fe80::214:2aff:fec8:5134%4
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192... Read more

A:Solved: Wireless works, wired doesn't

Read other 16 answers
RELEVANCY SCORE 152

The issue with my internet is that it works whenever i use my wireless internet, but doesn't work if i use wired. I know my router works because there are 2 other computers connected and they work perfectly. Also I know my cable is fine because i use it for online play with my playstation. My computer recognizes that there is a cable plugged in but i can't get a connection. Is there something that can be done.

Im running:

Windows XP
Netgear WG311 802.11g Wireless PCI Adapter

Please help me out if possible.
Thank You
 

A:Solved: Wireless Works But Wired Doesn't

Read other 16 answers
RELEVANCY SCORE 150.4

Edit:: Solved. Issue related to driver for network adapter.
:: Motherboard: Gigabyte GA-X58A-UD3R Rev 2, http://www.gigabyte.com/products/product-page.aspx?pid=3449#dl
Many thanks to etaf!

I have been using a wireless USB adapter to connect to the internet, but it drops the connection at random times. I decided to run a wired connection to the router, but I can't seem to get it to work. The first time I tried I got this: "Error 651: Your modem (or other connecting device) has reported an error." So I looked it up.

The main things I found were a Windows 7 bug with the file raspppoe.sys and a problem with Virtual PC. I am running Windows 7, but do not have Virtual PC. The suggested fix was to replace raspppoe.sys with a "working" one from vista. I downloaded it from the Microsoft site and replaced the file. Now I get "Error 797: A connection to the remote access server was not made because the modem was not found." I am still able to connect via wireless.

CMD ipconfig /all with the wireless:
Windows IP Configuration

Host Name . . . . . . . . . . . . : UberPandora
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Wireless LAN adapter Wireless Network Connection 2:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Linksys WUSB600N Wireless-N USB Network A
dapter with Dual-Band ver. 2
Physical Address. . . . . . .... Read more

A:Solved: Wireless works, wired doesn't - Same computer

Read other 16 answers
RELEVANCY SCORE 150.4

As the title says The wired connection from my computer won't connect to the internet but it works fine with the wireless connection. This just started a couple of days ago. Any ideas as to what could cause this?
 

A:Solved: Wireless connection works, wired doesn't

Read other 7 answers
RELEVANCY SCORE 144

My situation sounds similar to Partha's ( http://forums.techguy.org/networking/685600-setting-up-wireless-lan.html ), with some different elements in the network set up.

Here at work we have a wired network. Using our specified range of IPs and manually assigning them on the workstation computers, we're able to access the shared files on our "server" machine (just an XP pro machine hosting files) and we can also share our itunes libraries, printers, locally shared files, etc.

We have several wireless routers set to use an internet IP within our range, and set to DHCP to provide access to visitors. They provide flawless internet access but no access to our LAN (which is perfect).

Now we have a need to allow a wireless computer access to our LAN (namely iTunes library sharing). The router it connects to doesn't need to allow other connections (without LAN access), although that would be a perk.

I wasn't around when the system was installed, so I don't know it too intimately, but I'll do the best I can:

-All the wired computers and routers are connected to a 24 Port Linksys switcher.
-The "server" machine is running a VPN
-All the computers in question are running XP Pro SP2

Any help would be appreciated. Thanks!

--eric
 

A:Solved: Wireless/Wired network & file sharing troubles

Read other 7 answers
RELEVANCY SCORE 144

After reading posts in this forum and others, and reviewing MSFT tech docs, I'm still not able to establish file sharing between the wired PC and the wireless-connected laptop. Maybe I'm working under some stupid assumptions. I am able to ping each computer by their IP address - I can ping the laptop from the desktop, and vice versa. The desktop shows the Basecomputer under network places, but on the laptop, nothing at all shows up under network places. Laptop missing something?

The details:
a) Connecting to internet via DSL, Qwest ISP, Actiontec PK5000 Advanced Networking Network Router. Advanced Networking router, to me, means that home networking shouldn't require any other hardware. Stupid assumption?

b) Desktop PC is connected to the modem/router via ethernet cable
c) Laptop is connected to the modem/router via wireless, (Dell Wireless WLAN 1350 WLAN Mini PCI Card). Assocation tab of the wireless properties gives the network authentication/data encryption types as Open/WEP.

d) Some settings of the modem, viewed via the browser (192.168.0.x)
- Wireless security type: WPA
- MAC authentication Enabled
- Firewall security level: Off (NAT only)

e) Desktop PC is Windows XP Home Edition, SP 3

f) Laptop is Windows XP Professional Version 2002, SP3

g) Both are running Windows Firewall; File and Printer Sharing is checked for both, under the Exceptions tabl

h) I ran the Network setup wizard for both, using same Workgroup name, called HOME. Desktop is called... Read more

A:Solved: PK5000, unable to set up file sharing between wired and wireless

Thanks, I haven't seen this problem for some time. The issue is with the LAPTOP ...

(from a JohnWill post)

The Peer-Peer node is the issue.
Create a file with the following contents in NOTEPAD. Save it as NETFIX.REG from the File menu of notepad.

--------------------------------------- Include data after this line ---------------------------
Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters]

"NodeType"=-
"DhcpNodeType"=-
---------------------------------- include data before this line -----------------------------

Double click the file and say Yes to the merge question. Reboot and see if you're cookin' again.
 

Read other 3 answers
RELEVANCY SCORE 143.2

Hey. So I made a post a while ago and got recommended to buy a Netgear router, which I did. I bought this one, which is the one I was recommended.

Ok so the problem;

We have 2 laptops and 2 Pcs in my house, the 2 Pcs used wired internet and work fine, but the 2 laptops use wireless and that's currently not working. The laptops find the router, but can't connect to the internet through them. I've followed the set-up but they still don't work. Any advice please?

I know I must of left somthing out and you guys will ask me to provide certain info, i'll try respond asap.

Thanks guys.
 

A:Wired works, wireless doesn't.

Read other 16 answers
RELEVANCY SCORE 143.2

I have a home network. The PC (main) and 3 laptops.

PC is wired Modem-Router-PC

Laptops are wireless. The 2 laptops are able to pick up the signal and connect.

The 3rd laptop is XP.

Wireless-It will not pick up any signal in the networks. According to the computer, there is no network signals within range. (Which it is in range, for when I take 1 of the 2 other laptops that has connectivity in the same location, they pick up the signal just fine)

When I move the laptop to the pc and do modem-router-laptop with a wired connection, connection is fine.

Device manager shows PCMCIA card as a yellow question mark (needs correct driver). But I didn't think that the pcmcia card had anything to do with the wireless connection, as the slot in the laptop has always been blank.

It is a HP laptop, couple of years old.

Oh, it has worked before, maybe about 3 weeks ago, and as far as I know, no hardware/software changes have been made since then.

I have even tried to manually enter the SSID and security key, and still no luck.

I have made sure that I have all the windows update's done.

HP tech support was no help, as I kept on telling them about the pcmcia driver, they kept on telling me to install graphic/video card drivers.

Router is broadcasting SSID.

Any advice?

Oh, and will buying a PCMCIA card be an alternative fix to get a wireless signal?
 

A:Wired works, wireless doesn't

Well, I just showed myself that essential IT question everyone should ask 1st.

I needed to enable the wireless switch on the laptop. It is amazing to overcomplicate things when all it is most of the time is a switch of a button, a restart, or cord unplugged.
 

Read other 2 answers
RELEVANCY SCORE 143.2

Routher: TRENDnet TEW-633GR 802.11n + Gigabit Router.
PC: Running Windows XP
Laptop: Running vista.

The laptop can talk to the internet. But when the PC tries to talk to the internet, through the router, it has problems. Most of the time I get no data back, but occasionally I'll get a little. Web pages always timeout. Though I've at least once had a ping return (with 75% Loss).

I don't think there is anything wrong with the cables because it is the same cable I used before I had the router and it worked fine.

Any ideas?
 

A:Wireless Works, Wired Doesn't

Read other 7 answers
RELEVANCY SCORE 140.8

ok here is what i have.
main desk top is and has this
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: AMD Athlon(tm) XP 3200+, x86 Family 6 Model 10 Stepping 0
Processor Count: 1
RAM: 447 Mb
Graphics Card: NVIDIA GeForce4 MX Integrated GPU, 64 Mb
Hard Drives: C: Total - 152625 MB, Free - 23954 MB;
Motherboard: First International Computer, Inc., AU31, PCB 1.x, C0E4B02720
Antivirus: AntiVir Desktop, Updated: No, On-Demand Scanner: Enabled
it also has a belkin usbwifi
alltel 3g air card.

what i need help with is want to conect and share the internet and files this comp though a
linksys wrt54g2 router that is wired to the ps3 and a d-link hub.
the d-link hub is wire to 2 desk tops and a laptop and a hp printer.

where do i start for some reson i can only have ether my 2 desktops and my main on net or my ps3.
if ps3 is on and i want to start net on a comp i have to shut off ps3 and restart all comps what am i doing wrong
 

A:help networking 3 comps wired one wifi and a wired printer and a ps3 wired

lets see an ipconfig /all

------------------------------------------------------------------------
ipconfig /all
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post results here

We would like to see the results from ipconfig /all post back the results in a reply here

Hold the Windows key and press R, then type CMD then press Enter to open a command prompt box (A new dialogue box - black with white font, will appear on screen ):

In the command prompt window that opens, type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

ipconfig /all > network.txt & network.txt

It will export the results to notepad and then automatically open notepad.

Now all you need to do is copy and paste those results to a reply here
to do that:
From the notepad menu - choose Edit - Select all
all the text will be highlighted
Next
From the notepad menu - choose Edit - Copy
Now go back to the forum - reply and then right click in the reply box and paste
------------------------------------------------------------------------
 

Read other 1 answers
RELEVANCY SCORE 140

H'Okay, So I'm trying to hook up the internet to two computers.
One computer(windows vista) is wired straight to a router.(This one-->http://www.sigelectronics.com/core/media/media.nl?id=18358&c=666363&h=4a8711b8216d4c4aea31 )
The other(Windows XP) is hooked up to one of those stick-internet-recievy-thingies. (This thing: http://www.yinfor.com/blog/archives/images/dlink-wua-1340-wifi.jpg )

So, the one with the stick thing works all nice and dandy, but the one that's hooked to the router won't work. A pop-up thing comes up and says that both computers have the same IP. But, I thought that was supposed to be how it worked with a router?

So... I have no idea what to do about this. : S
Help?

 

A:Internet problem, wireless works, wired doesn't?

All devices on a network must have a unique IP address. If you have assigned one or both a static IP address then change it/them. If both are using dynamic addressing then shut them both down and unplug the router. Then plug in the router followed by booting the computers.
 

Read other 3 answers
RELEVANCY SCORE 140

This problem appears to be a variation on the hardy perennial "foo" doesn't have a valid IP configuration" problem.

My Win7 machine originally had a DSL connection through a router using an Ethernet cable, and it worked great. I used the same router for wireless and to connect with a home network to my other computers running XP Pro.
Then I changed to FIOS, and a new wireless router that had to be located in a non-wire-reachable location. No problem, a USB wireless dongle and the win7 box was happy again and could see the internet via wireless.

However. I could not connect the rest of my network, also in the non-wire reachable location. I want to use the main box, the win7 one, as the internet connection and connect the printers and other computers to it via cable and a switch. The LAN is showing as the dreaded Unknown Public connection which cannot be reset, the diagnosis is "doesn't have a valid IP configuration", and I've tried setting up ICS, making sure the security settings for files is NOT 128 bit, the IPV6 and 4 are set to automatically gather IP settings on all machines, and I'm running out of ideas. I don't let Microsoft automatically update anything, so I don't think it is a driver issue. The win7 ethernet card worked great when it was the only connection. I *think* I saw a connection on one xp pro box before changing the IPV settings on it, but I can't be sure. I got a brand new D-link ethernet switch to try and make this work, b... Read more

A:Wireless internet works, wired switch doesn't

Hi wish I could offer a solution but I cannot unfortunately....


I am actually wondering if you could help me out I also have a Zyxel G-220v3 usb wireless adapter that I bought from Verizon Dsl Dept. Since Zyxel has made this verison of the card only for verizon dsl customers the software cd that came with it is unreplacable!

I was just hoping that you might be able to send me a copy maybe by email?

Thomas Miller.
Tomm2079 at Gmail Dot Com

Read other 2 answers
RELEVANCY SCORE 140

OK, first off I'm a newbie to this forum, so hello all. And I'm also pretty much a newbie to Vista also, but know XP alot, so should be able to go along with any help. Here's the problem:
I had someone move into my old office & his computer (Dell, Vista Home, 1gbRam, 160GBhd, nVidia network controller) is now going to be the one wired directly into the router & modem with the rest of the 3 comps in the house getting wireless signal as they had been for the past 2 years.

When I first plugged his comp in & installed the Netgear router from the disk, the install screwed up in that his comp was getting the internet cause it was plugged via ethernet, but the rest of the house couldn't cause there was no wireless signal. Also shown by the wireless light not being on on the router, but all the other were, power, LAN port4, & internet.

So I uninstalled the router since wasn't working correctly unplugged it all from the comp to restart fresh.

Went and did the install again, but now the wired in comp is not getting any kind of internet signal at all either being plugged directly into the modem, directly into the router, or even trying use one of the wireless USB adapters that are running on the other comps just fine, on it right now, but even that way there was something not allowing it to install correctly and get an internet signal, just kept saying can connect to a local network but not to the internet, rebuild this, blah blah blah.

Somehow/way the vista compu... Read more

Read other answers
RELEVANCY SCORE 140

I have a strange situation. i have a Linksys wireless-g router I have a laptop, with windows 2008 server on it, named "DAVEG" with ip 192.168.1.104, with both ethernet & wireless adapter, with only the wireless adapter enabled (no ethernet cable) i have a desktop, with windows xp on it, named "DAVE_DESKTOP" with ip 192.168.1.107, with both ethernet & wireless adapter, with both connected to my home router I have both my desktop and laptop local drives shared, and can access them with the "\\xxxx" notation in start-run in either direction, with the wireless adapter enabled on my laptop, not with only the wired connection. when i have my wireless adapter enabled on my laptop, i can both ping my desktop by IP and by name, and the same goes for pinging my laptop IP and host name- both work. when i have my wireless adapter disabled on my laptop, i can only ping my desktop by IP, not by host name - and the same for my pinging my laptop from my desktop - only the ping by IP works. any ideas why? also of note, is that when i do a tracert in either direction, the address of the router (192.168.1.1) does not show as one of the hops. My guess is this is due to APIPA, but that really a problem that I'm aware of. also, i am able to ping internet addresses both by IP or URL from the laptop regardless of which connection is enabled. Thanks
 

Read other answers
RELEVANCY SCORE 140

The subject says it all--my laptop, which wirelessly connects to the router, works perfectly. My desktop, which is wired into a LAN port of the router (and I've tried different ports), works for a time, then cuts out. When I try to repair the connection, it can't renew the IP address. What's going on?
 

A:Netgear WGR614 Wireless Works, Wired Doesn't

Read other 6 answers
RELEVANCY SCORE 140

Hi,
I'm trying to set up a wireless network for my parents. I have a Belkin Play N600 router (model F7D8302) that I'm trying to hook up to an Acer desktop running Vista. The modem is a Siemens Speedstream 4100. I have a cable going from the ethernet port of the modem to the modem port on the router. The pc is connected to one of the other four ports in the router. The wireless works fine, but I can't get the wired connection on the desktop working. The Internet light on the modem is not on, but the modem works fine when connected directly to the pc. I've tried power cycling and resetting everything, but it's still not working. Any ideas? Thanks.
 

A:Belkin Router - wireless works but wired doesn't

Read other 11 answers
RELEVANCY SCORE 138.8

Hi all,

I have an Aztech ADSL 2/2+ modem and a Dlink DGL4300 wireless router.

I set up my modem and when wired to my pc, it works.
I followed the manual to install the wireless router, so that my pc is now connected to the wireless router, but somehow I'm not able to get the internet.

It works again when i replug my pc direct to the modem.

Can any1 help me please?

I set up my wireless router to connect to internet via PPPoE, settings are fine. do i need to reset anything and in any particular order?

Thanks,

Tom
 

A:Wired to modem works, but wired to router does not

tom4u said:





I set up my wireless router to connect to internet via PPPoE, settings are fine. do i need to reset anything and in any particular order?Click to expand...

The modem has the PPPoE connection; Your wireless connection to the router should be straight ethernet
 

Read other 7 answers
RELEVANCY SCORE 138.8

Hi. I formatted both my laptop and desktop computer. When i did with my laptop, everything was great. Wireless still worked. Of course i have my linksys router connected to get the wireless.
I then formatted my desktop. Its a dell. When i did this, everything seemed great. However, i noticed that if i remove my wireless router and just connect my cable modem wired, it works. However, when i connect my wireless router, then my wireless internet works but my WIRED connection does not work. It has this message that says can't connect.
Can someone help me here? I don't think this has ever happened before. I mean, there were many times where my desktop got formatted and my wired internet worked and i could not get my wireless connection to work. But never had i had my wireless work and my wired connection not work. Can someone help me on this? The one thing i did this time was after i installed the drivers with my windows cd, i then deleted the old windows file that was about 25 gb. Could that be a reason?

A:Wireless Internet Works, Wired Connection Doesn't Work

Hello Dynamite, My name is Dusty, and hopefully I am able to help you out some.

Do you have windows updated? Also, Windows update can check for drivers automatically.

Do you have a LAN driver and wireless adapter driver installed? If windows update doesn't find them, look them up on your motherboard's manufacturer's website and your adapter's manfacturer's website, respectively.

Follow this link to uninstall/reinstall wireless adapter: Internet speed suddenly slow?. Believe it or not, It may help with your problem.

Read other 1 answers
RELEVANCY SCORE 138.8

Hi there,

I'm having this strange problem i never had before, yesterday when i turned on my laptop, strangely i couldn't find my wireless network on the list, i can see all the neighbors networks that always show up but NOT mine! I adding a wireless network manually but that didn't work either so i removed it, then i plugged in the cable and its working perfectly, but i just can't figure it out why wouldn't the wireless work. I tried clicking that "connect even if the network is not broadcasting" but that didn't make any changes!
I have a dell inspiron 1525, windows 7, ZyXEL Prestige 600 router

ohh and yes, this last week i would sometimes loose signal from my adapter, i usually had to switch it off and then on again and it would work. But i have no idea what should i do now !

Please HELP!
 

A:wireless network suddenly doesn't show up, but wired it works?!

Read other 11 answers
RELEVANCY SCORE 138.4

Problem:
Computer 1 is connected to Wireless router (Air link 101 or AR670W)
through Ethernet, but computer 2 is connected to the router wirelessly. I have a printer connected to computer 1.

I want to share files and the printer with computer 2 but I don't know how to do that. I know that this is easy for both computer connected the same way using wired or wireless.

Note:I have Windows XP SP3 in both computers.

edit:
I have share document in share mode for both computer. I try to open Mshome in "My Network places" and here the result:

In computer 1(Wired), I can not access Mshome when I click on " View workgroup computers"

In computer 2, I see both computer 1 and 2. I can access the share document of 2 but I can not access computer 1
 

A:Wired to Wireless file sharing.

http://support.microsoft.com/kb/304040 try following this out. Jazz
 

Read other 3 answers
RELEVANCY SCORE 138.4

Hi there,

I've got a desktop with a wired connection to a cable broadband modem (with only one connection on it) and I'd like to have my laptop (which has a wireless card) to share that connection only wireless .... if you know what I mean... anyone tell me what I need to do to get that working? is it possible?

cheers,
Mark.
 

A:Get wireless laptop and wired desktop to share wired cable broadband connection?

Read other 10 answers
RELEVANCY SCORE 136.8

I have 2 computers - a desktop DELL and laptop DELL. I connect to the Internet through a Cable Modem and Linksys Wireless G Router. I connect to the router from the desktop via CAT5 cable. I connect the router from the laptop with it's built in wireless network card. I have recently reinstalled the operating system and software onto a new hard drive in the laptop due to a hard drive malfunction. I have set both systems to function on the same WORKGROUP, given each computer a unique name, and have activated file/print sharing on both systems. They both connect to the Internet beautifully. I can see the shared files on the laptop from my desktop with no problems. However, I cannot see the computer, let alone the shared files on my desktop from the laptop. I have data from when I backed up the laptop's hard drive on the desktop system that I would like to retrieve and transfer to the laptop. You can see I'm having difficulty doing so. I would also like to share the printer hooked to the desktop with the laptop, but am also unable to do so. I have done this in the past also, but for whatever reason, I am unable to now... HELP! Thanks.
 

A:File Sharing on a wireless/wired network with XP Pro

Likely you already have a lot of this in place, but the basics for troubleshooting are:

1. Make sure you have the same IP scheme (e.g. 192.168.0.x).

2. Make sure you have the same Subnet Mask, Gateway, and DNS IP addresses.

3. Make sure you can ping the other computer's IP address. If this fails, just for testing, make sure you turn off XP's as well as any other firewall.

4. Make sure you can ping the other computers by name.

5. Make sure you have the same workgroup name (watch for trailing spaces)

6. For troubleshooting purposes, turn off XP's and completely uninstall any other firewall software. You can always add more complexity after you get it working.

7. With XP, make sure you have the same username and password as the person logging onto the other computers. The default setting for XP Pro is to require a password for network access.

8. More details about how to network XP can be found at:
http://www.onecomputerguy.com/networking/xp_network.htm

9. More details about how to troubleshoot TCP/IP networks can be found at:
http://www.onecomputerguy.com/networking/trouble.htm

10. Apply the registry edit to fix the browsing delay from XP to Win9x computers
http://www.onecomputerguy.com/windowsxp_tips.htm#browsing_delay.

There continues to be a lot of misinformation about needing NetBEUI or to changing the NetBIOS setting. You can ignore both. Installing NetBEUI to solve a networking problem will just mask a some underlying and potentially important ... Read more

Read other 1 answers
RELEVANCY SCORE 136.8

Ok, first up, here's a diagram to explain my current network set-up, hopefully it will make it a little clearer what I'm talking about

Hooray for paint!

The problem I'm having is with windows file sharing. The two PCs connected via the wired network can see each other just fine, and file sharing is not a problem.
However I cannot see any of the workgroup computers from the laptop, which is connected to the network wirelessly via the wireless router.

I can ping both the wired router and the PCs from the laptop, but trying to ping the laptop from the PC times out.

Its probably worth pointing out that the laptop can connect to the internet with no problems at all.

PC 1 : Windows XP SP 2
PC 2 : Windows Vista Ultimate
Laptop : Windows XP SP 2

All the computers are added to the "WORKGROUP" workgroup.

Summary of Network

American Robotics Sure Connect Modem Router: IP 192.168.1.1
- PC 1 : IP 192.168.1.XX
- PC 2 : IP 192.168.1.9 (static)
- Xbox : IP 192.168.1.6 (static)
- Buffalo Airstation Wireless G Router: IP 192.168.11.1
--- Laptop : IP 192.168.11.9
--- Nintendo DS
---Nintendo Wii

I doubt its relevant but the wireless network is WEP128 encrypted.

Any help is appreciated, thanks
 

A:File Sharing over Wired/Wireless Network

It's the NAT layer in the second router. Try this configuration:

Connecting two SOHO broadband routers together.

Configure the IP address of the secondary router to be in the same subnet as the primary router, but out of the range of the DHCP server in the primary router. For instance DHCP server addresses 192.168.0.2 through 192.168.0.100, I'd assign the secondary router 192.168.0.254 as it's IP address.

Disable the DHCP server in the secondary router.

Setup the wireless section just the way you would if it was the primary router.

Connect from the primary router's LAN port to one of the LAN ports on the secondary router. If there is no uplink port and neither of the routers have auto-sensing ports, use a cross-over cable. Leave the WAN port unconnected!
 

Read other 2 answers
RELEVANCY SCORE 136.4

I set up everything and if I have it wired it works fine but wireless it says can't find page when you try to get on the internet. I have set up networks before and never had a problem. first time I have used a Belkin router G+ I guess one of my question is this. I was reading on the Belkin site that it is already set for dynamic and that is for a cable modem and sounds like I should change it to pppoe for a DSL modem. would that make the difference. It is a brand new laptop and the wireless card is on and it sees the network and works when wired, it says it is connected wirelessly but wont get on the internet when not wired. Would the pppoe thing make a differnce? Please give me some help here. Thanks
 

A:Belkin wireless router with vista-wired works wireless doesn't

Read other 8 answers
RELEVANCY SCORE 136.4

I have a belkin wireless/wired router, and it's really starting to stress me out. I have the wireless part working just fine, all my wireless computers connect to each other/the internet just fine. BUT, my wired computer is not connecting to the internet at all, but the DHCP is still assigning it an IP address and the computer thinks everything is fine. When I click on Internet Explorer, it says that the page cannot be displayed. It's driving me mad, can anyone help?
 

A:Belkin Router, Wireless and Wired... Wired Problems...

Read other 6 answers
RELEVANCY SCORE 132.8

Hi,
I'm having a problem with my internet connection. My wireless connection shows that it has a poor signal strength but for some reason I can only connect wireless using a wire? I find it strange because I can't connect to the internet using just the wire. After I've connected the wire, I have to connect to the wireless connection.
I'm sorry if I'm not explaining the problem well enough but English isn't my native language.
System: Windows 7
Router: Speed Touch
---------------------------------------------------
Problem solved, I just had to disable the wireless adapter...
 

Read other answers
RELEVANCY SCORE 132.8

I have been trying to figure this out for two days now and this is my last ditch effort.

Yesterday I was able to connect wirelessly perfectly fine and now it won't. Our iPhones and PS3 are able to connect to the WiFi, but my laptop just refuses. I can connect to the internet from my laptop when I plug in an ethernet cable, but not wirelessly.

What I have tried:
Resetting WINSOCK and TCP/IP
Disabling all encryption
Power cycling the router
Updating network card drivers
Just about everything else I could think of

ISP: Charter
Router/Modem: Ubee U10C037
Connection: Wired and wireless
Encryption type: WEP, WPA, and unencrypted
Network card: Atheros AR5007
OS: Vista

Host Name . . . . . . . . . . . . : Phil-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Atheros AR5007 802.11b/g WiFi Adapter
Physical Address. . . . . . . . . : 00-1F-E1-1C-27-92
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::4c0d:dff5:46f4:606b%12(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.0.11(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Wednesday, May 11, 2011 9:50:15 AM
Lease Expires . . . . . . . . . . : Wednesday, May 11,... Read more

A:Solved: Wired works, but not wireless

Read other 7 answers
RELEVANCY SCORE 132.4

I want to set up simple file sharing at home for two laptops connecting through wifi and two desktops connecting through cable to the same router and all running windows 7. While communication between wired-wired and wireless-wireless devices is flawless, for some reason network discovery across wired and wireless devices is erratic at best, wired devices barely see wireless ones if at all and vice versa. (The same cross communication problem exists using homegroups.)

I believe the culprit is that windows thinks my router is two separate physical devices, a wifi access point for the wireless and a switch for the wired computers, therefor handling them as though they belonged to different subnets. I have attached the full network map as seen from a laptop and a desktop.

Strangely I can't access remote computers missing from the network map through windows explorer if I put computer names in the network path but SOMETIMES I can do so using ip addresses. However once I managed to access a particular computer using its ip address suddenly its name starts working in the network path AND it shows up on the network map which leads me to believe something is wrong with netbios.

Ipconfigs attached, all computers run win 7, belong to the same subnet and workgroup, have unique names, firewalls and other security software are temporarily off, the connections have lltd enabled and all belong to home network with the following settings: network discovery on, file and printer shari... Read more

A:simple file sharing problem betweem wired and wireless computers

The problem is that those machines are on different subnets, one is at 192.168.0.1 and the other is at 192.168.0.5 for some reason. Maybe you have a setting in the router that is causing this like some sort of wireless guest account.

Windows can't really do this on it's own so it's either a static IP mistake or the router is using a guest account for the wireless connections.

Is there more than one router in this network?

Possibly a router/modem connected to another router?

This is usually the cause for this problem but it's difficult to guess at this without more information.

Read other 4 answers
RELEVANCY SCORE 131.6

Hello,

My wireless connection has been working just fine, but it randomly just dropped. I tried to reconnect but was unable to, so I restarted my laptop.

After it booted up again, my laptop did not automatically connect to my connection like it normally does, so I manually connected and everything seemed fine. A couple minutes later, my connection dropped again. I reconnected only to have it drop a couple minutes later. I restarted my laptop but now I am unable to connect at all, but if I use my ethernet cable my laptop can connect to the internet just fine.

I've tried trouble shooting, restarting my router, and looked at my network adapters in device manager.

I also tried to connect to my friend's router and ended up with the same result

Also, when I restarted my laptop once, It said something about a pipe name could not be obtained. Not sure if this is part of the problem or not, but it was an error message that I have never seen before.

Thank you in advance.
 

A:Solved: Wireless issue, Wired however works

Read other 8 answers
RELEVANCY SCORE 131.6

I have a Motorola Surfboard SB5120 Cable Modem hooked up to a Linksys Wireless-G Broadband Router Model WRT54GS and a Netgear Dual Speed Hub DS116.

Two days ago I noticed significant lag issues with the wireless internet on my Xbox 360 and I thought our unprotected WiFi might be getting stolen. I put a WPA on it and continued playing, and it seemed to have helped. However, my family and I noticed that our iPhones began to have problems with the WiFi; even after putting in the WPA password, the phones were unable to access the internet. First I tried messing with the DNS address on the WiFi settings on the iPhone, then I changed from WPA to WPA2, then I took off the password completely and the problem persisted. I reset the modem and router, unplugging and reconnecting everything countless times, still to no avail.

I'm using Windows 7 on my laptop, which I have directly connected to the router. The wireless signal is still in the air, and I can connect but I can't use it. None of these issues existed before I put the WPA password on the internet.

Here's the ipconfig /all from this computer.

Windows IP Configuration

Host Name . . . . . . . . . . . . : MainComputer
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection 2:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Descripti... Read more

A:Solved: Wired connection works but not wireless

Read other 16 answers
RELEVANCY SCORE 131.6

Can anyone help please?? We have a wireless router and our 2 laptops work fine (ie can connect to internet wirelessly via the laptops) BUT our desktop PC, which is older (2004) and is connected by cable to the router suddenly cannot connect to the interent, etc. Any ideas? Thanks in advance for your help!

A:[SOLVED] Broadband works wireless-ly NOT wired?

Couple of things you can try. Open Network connections on the desktop PC and right click on your NIC. Select "Repair" and see if Windows can fix the problem for you. If that doesn't work then go into Device Manager and find the NIC. Right click it and select "Uninstall". Click okay on the prompt that comes up. Reboot the machine and let Windows reinstall the NIC.

Try to establish where the break in connection is by pinging the router or doing a Tracert on an external website (www.microsoft.com ?). This will tell you how far the signal is getting. I suspect that you aren't connecting to the router and it should be okay once you do the above processes. If not then check the cable (preferably with another known good one).

Read other 4 answers
RELEVANCY SCORE 131.6

Hi - I just setup a new modem, worked with the ISP to properly configure it so it works when it's directly wired to the computer. But when I try to connect it to the wireless router (Netgear WGR614) I can't connect to the Internet. The ISP gave me the login & password info from the modem and told me to change the Basic Settings of the router with that info, which I did. Can someone help?

Thanks!

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) D CPU 2.80GHz, x86 Family 15 Model 4 Stepping 7
Processor Count: 2
RAM: 3326 Mb
Graphics Card: NVIDIA GeForce 9600 GT, 512 Mb
Hard Drives: C: Total - 71468 MB, Free - 20764 MB; E: Total - 305242 MB, Free - 256744 MB;
Motherboard: Dell Inc. , 0HJ054, , ..CN6986163T09A9.
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated: Yes, On-Demand Scanner: Enabled
 

A:Solved: New modem - works wired, but not wireless

Read other 8 answers
RELEVANCY SCORE 130.8

Hello, I have a Linksys router and Everything is connected right, but if I don't have my wireless adapter in, I can't get any response from the network. There's no other computers I can test anything but when I troubleshoot the issue it says "you may not have a internet adapter" or something like that, I can't remember and it won't come up while the net is activated... Please help.
 

A:Wired not working, wireless is (need wired cause I'm using room mates wireless)

Read other 6 answers
RELEVANCY SCORE 130

I have my internet hooked up to a DSL Modem and a Wireless Router. But I had configured the Wireless Router wrong that I couldn't connect to it using a WiFi. I was going to reconfigure it but the Netgear Router was outdated that their reconfiguring URL no longer existed. So I went out and got a *NEW* Netgear Router. Prior to the *NEW* Router I had a Laptop and a PC connected via DSL Cable connected in the Wireless Router. Now with the *NEW* Router I had just purchased I connected everything just like I had done with my previous Router. Wireless Connect works great but I can't connected using the DSL Cable connection. It does not respond. I tried connecting the cables to different ports but it didn't work. My PC mainly needs the wired connection cuz it's where I play my Online games. I tried playing with my Wireless connect but it lags very bad. Can someone help me figure out how to get the wired connections to work ??

Wireless Router : Netgear N600 Wireless and Dual Band Router
 

A:Solved: Wireless Connection works but Wired not working ?

how many pcs are connected by wire?

lets see an ipconfig /all with just the cable connected
------------------------------------------------------------------------
ipconfig /all
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post results here

We would like to see the results from ipconfig /all post back the results in a reply here

Hold the Windows key and press R, then type CMD then press Enter to open a command prompt box (A new dialogue box - black with white font, will appear on screen ):

In the command prompt window that opens, type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

ipconfig /all > network.txt & network.txt

It will export the results to notepad and then automatically open notepad.

Now all you need to do is copy and paste those results to a reply here
to do that:
From the notepad menu - choose Edit - Select all
all the text will be highlighted
Next
From the notepad menu - choose Edit - Copy
Now go back to the forum - reply and then right click in the reply box and paste
------------------------------------------------------------------------
 

Read other 3 answers
RELEVANCY SCORE 130

I have a three year old HP Laptop with Windows Vista home premium SP2, 3 GB RAM. Never used it with a wired connection, and had no connection problems with a wireless. Recently I had no wireless connection available and tried to connect to a wired connection. No success. Tried to get to the original driver for NVidia nforce network connection, and it worked! A few days ago, windows updates had an option to update this driver, and I updated it (while I was using wireless). I now have tried to connect to wired LAN, and no connection again! System restore has not helped. Device manager lists three network adapters: Broadcom 802.11 b/g WLAN, HP Netserver 10/100TX PCI LAN Adapter (with a yellow sign. no updates for the driver found), and NVIDIA nForce Networking Controller.

Grateful for any help in getting it connected with wired LAN.
 

A:Solved: No connection with a wired LAN. Wireless works perfectly.

whats the exact model of the HP Laptop - looks like you need the driver for the LAN Adapter

lets also see if possible to copy device manager and ipconfig /all and also xirrus

------------------------------------------------------------------------
{Device Manager}
Post back the results in device manager
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
Start > control Panel {Vista set to classic view}> system > {Vista, device manager on left hand side} {XP hardware Tab, device manager button} >
windows 7
start > control panel> System and Security> Device Manager

network adaptors, click on the + > post back the devices listed there
are there any ! ? or X
post a screen shot of the device manager - network adapters

To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.
To upload it to the forum, open the full reply window and use the Manage Attachments button to upload it here
------------------------------------------------------------------------
------------------------------------------------------------------------
{ipconfig /all}
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post r... Read more

Read other 3 answers
RELEVANCY SCORE 130

All of my wireless devices are able to connect to my wifi but my desktop computer which is a wired connection gives me Error 1068: Dependency service or group failed to start.

In ipconfig/all I show: IP routing enabled:no wins proxy enabled: no and the default gateway address is blank.

I have Windows 7 64x and my ISP is AT&T Uverse and they say my gateway should be plug and play.

I saw this post http://forums.techguy.org/networking/1053204-wins-proxy-ip-routing-not.html and I tried everything listed but no luck.

I also tried everything that was detailed in the following post : http://answers.microsoft.com/en-us/...pendency/7963d72a-5d73-44fe-8316-058c46235737 (Yes I did backup the registry first)

Any ideas or suggestions are appreciated!
 

A:Solved: Wireless works but wired computer can't connect

Read other 14 answers
RELEVANCY SCORE 130

I have no idea what I have done to my computer.
For a reason i will keep to myself, I recently booted my computer from a Slax cd. When I rebooted my computer to Windows, I lost all of my internet connectivity on my desktop. My ISP is Verizon (FiOS) and I have the ActionTek router that they supply. Every other connection through the ActionTek router works. I am currently using a laptop that is wirelessly connected to the ActionTek, and I am able to connect to XBox Live using a wired connection to the router.

The operating system of the internet-less computer is Vista.
Below are some screenshots that may be helpful.
So far I've tried: repairing the connection with Vista, resetting my router, and uninstalling and reinstalling my network card from device manager.
Please help.

 

A:Solved: wired only connection issue, wireless works

Read other 8 answers
RELEVANCY SCORE 128.8

Hi

I'm having 2 computers: a Desktop and a laptop, both has Windows XP. The desktop is connected to the wireless router with LAN cable and the laptop connects using wireless connection.

I want to share files and printer between those computers but although I entered both computers to the same workgroup and enabled file and printer sharing I can't access one computer from the other.

Can you help me find what other settings should I change?

Thanks
 

A:Solved: Sharing files in a mixed(wired+wireless) network

Read other 7 answers
RELEVANCY SCORE 127.6

I've read several posts here that come close to my issue but don't describe it exactly.

Yesterday on my personal laptop (Dell E1505 running XP SP3), I got a message box saying something about port forwarding and that I wouldn't be able to get to my website, or something like that. Unfortunately, I didn't pay much attention to the message and dismissed it. Now, I can't get to the internet using wireless. Here are some details:
Another laptop connects to my wireless network and the internet just fine
All was working fine on the Dell until I got that message
I've checked the event log and can't find anything relevant around the time of the message
Connecting to the network/internet with ethernet cable works fine.
I'm definitely connected to my wireless network because I was able to open shared files on another PC
Other, likely non-related issues:

I'm having a little problem with the hard drive and will need to run chkdsk
Sometimes I get an error regarding the display adapter driver.
Thanks.
 

A:Solved: Wireless networking works but not internet; wired & wireless from other lapto

Please attach a screen shot of the Networks page (don't collapse the Radar, Connection or Signal History) of the Xirrus Wi-Fi Inspector. If you need help with that see TSG Posting a Screenshot. FWIW to take screen shots with Windows 7 or Vista I prefer to use the built-in Snipping Tool.

Also show ...

Open a (black) Command Prompt window:
Hold the Windows logo key and press r; in the Run box type cmd and click on OK.

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

Read other 3 answers
RELEVANCY SCORE 124

First time posting, so please help.
Iím trying to fix a home network (of about 12 PCís) that has been on/off for the last 2 weeks and has now completely gone down (ie: no outside connection, but still lan). I power surged the Linksys wireless router and now the wireless network is working, but the wired is not? The diagram is as follows: Cable Modem => 12-port router => Linksys WAP. Itís odd that the WAP functions, but nothing that is connected to 12-port functions. What makes it stranger: I tried replacing the router with a D-Link DI-624 and still no connection to outside the network (wireless or wired). More info: using dynamic IP, all windows XP machines, when I used the D-Link the ip was seemlessly renewed, but with the existing router, the operation timed-out.and normal 192.168.1.x IPís. I would access the wired router, but I donít know the manufacturer because it was installed with the house. And I youíd think it was the ISP, but why does the wireless network work? Or, you could say itís the NICís, but why wonít any for the 5 PCís work? Any help would be great!
 

A:Wireless works, but not wired? very odd

Read other 10 answers
RELEVANCY SCORE 124

Hi all!
 
I am working on a sony vaio that is having connectivity issues. At first i was not even able to connect to internet by wired connection. I had to turn on the DHCP in the services which i thought was odd it was off. So im guessing there is something also turned off for the wireless as well and im not sure what it is. I know sony vaio have a wireless switch on them and mine is on i have checked that. When i try to diagnose why there are no wireless connections I get " Windows Wireless Service is not running" and i dont know how to fix that. It tells me to contact administrator. Any thoughts help thanks!

A:Wireless not seen but Wired works

Hi
You didn't specify the O/S we are dealing with but here are some things to check...
 
Services > WLAN AutoConfig
Settings: Started, Automatic, Local System
 
Specifics...
General tab
Startyp type Automatic
Service Status Started
 
Log On tab
Local Service account
 
Recovery tab
First failure: Restart Service
Second failure: Restart Service
Subsequent failures: Take No Action
Reset fail count after: 0 days
Restart service after 2 minutes
 
Dependencies tab
This service depends on the following system components
+Extensible Authentication Protocol
 +CNG Key Isolation
  +Remote Procedure Call (RPC)
   DCOM Server Process Launcher
   RPC Endpoint Mapper
 +Remote Procedure Call (RPC)
  DCOM Server Process Launcher
  RPC Endpoint Mapper
 Native WiFi Filter
 NDIS Usermode I/O Protocol
 +Remote Procedure Call (RPC)
  DCOM Server Process Launcher
  RPC Endpoint Mapper
The following system components depend on this service
No Dependencies
 
Device Manager > Network adapters
Locate and Uninstall* the Wireless Adapter, Reboot Windows and let the O/S Reinstall the device.
* If you are asked to remove any software associated with the device answer NO
 
Lots of luck and Please keep BC posted!

Read other 5 answers
RELEVANCY SCORE 124

Hi,

I'm experiencing a weird issue with my laptop. I'm running windows 7 on it and everything is working fine, but when I plug in the ethernet cable my computer will not connect to the internet. I tried updating the driver for the ethernet port (not the wireless), I tried disabling and enabling the ethernet connection through the control panel, and nothing. I also tried plugging in the ethernet cable and disabling the wireless option on my laptop too, and that just left me without any connection at all.

On my other laptop I plug in the same ethernet cable and the port lights up and the network icon changes to the wired one. On this one it's like the port is dead.

Please advise, and thank you for your time!
 

Read other answers
RELEVANCY SCORE 124

I just got home from my vacation only to find my internet stopped working. I tried a few things like resets and trouble shooting none of this worked so I hooked my laptop to a wired a connection and amazingly it worked. I figured the router had just had some little hic up and was back to working but as soon as I unplugged the cable it went back to not working. Heres all I know my router is a netgear wrn2000 model, my laptop is not the only thing that can not connect through a wireless connection as my ps3 and itouch can not. Also my laptop is not the only thing that can connect through a wired connection as my xbox can too. According to my laptop I have full signal strength but says I have no internet connection, a weird thing is that at one point the wireless did work but really slowly and would drop the connection pretty quickly. If any more info is required for help please post and I will tell you. ANY and all help will be much appreciated as I have been at this for a few hours now.
 

A:wired works, but wireless does not

Read other 9 answers
RELEVANCY SCORE 124

Hi.
I have a problem for which none of the tenths of solutions I've found work.

I have a router configured as an access point for both wireless and wired connection. Wireless works OK. Wired LAN does not, at the moment. I have no idea why this might be, as I've tried different checks to make sure everything is set up properly.

First of all in Network and sharing center I can see that I am connected to a network that is connected to Internet, my IP, gateway, dns are all exactly what they should be. Windows knows there is a connection to the Internet but I can't access it with LAN.
I also have windows XP and linux installed and both work perfectly.
I have this router for about 2 years now and the only OS's that gave me any trouble were Vista and 7 (though I didn't keep vista to long).

I have to mention that most of the time Lan in windows 7 works, just not these couple of days.

I've reset my router a couple of times, changed the order of the cables, took a look at the firewall but nothing works.

I've inserted the main Internet wire cable directly into the computer and it works.
After installing the system all works OK, and without any other changes it stops.
Sometimes it just works, sometimes it does not. I think that it usually stops after I take out the lan cable for a few hours while the computer is running, restart and after that no business.

As I said before windows detects everything to be in perfect working order. Even the troubleshooter find's no problem.

Any id... Read more

A:Wireless Works, Wired Lan does not

Welcome..to the Forum...Have you checked internet adapter setting, i mean its ip address and all...I think those should be according to the router settings...may be blank i.e. automatically acquire or set what u have given in router...you can access these settings at: Open Network and sharing center > Change adapter settings > select desired adapter > right click 2 open properties > select ipV4 and its properties...to see the ip address configuration in LAN

Read other 4 answers
RELEVANCY SCORE 124

I need help with a wireless VPN connection.
I have a work laptop that is using the Cisco AnyConnect VPN client.
At home I have a brand new Linksys E2000 wireless router. I setup the router and it works very well for normal internet traffic with 3 different computers.

But the problem is when I try to make a wireless VPN connection on my work laptop. The VPN connects, but then disconnects.

However, when I connect my work laptop to the router with a cable, I CAN connect to my work VPN just fine. I really need the wireless to VPN to work.

Do you have any ideas?
 

A:VPN works wired but not wireless

Does anyone have any specifics on what I should check?
I have seen many other people on the forums with the exact same issue I am having. I have tried many solutions that i have seen that corrected the very same problem for other people, but none of the solutions have worked in my case.
 

Read other 1 answers