Over 1 million tech questions and answers.

Computer Case

Q: Computer Case

I have a computer case where the on/off switch doesn't work when plugged into the motherboard. The computer is fine, I can jump the board but I need to resolve the issue with the on/off switch. it's just a PII case, no real thrills. The pins to the motherboard consist of (2) wires to the on/off switch, but the pin is (3) prong with a dummy in the middle. If you have any suggestions or need more info I'm online and watching? Thanks

RELEVANCY SCORE 200
Preferred Solution: Computer Case

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Computer Case

Hi bturner
If you have the right tools you can sometimes get the pins to release from the connector and move them next to each other. If you can't get that to work you could use an exacto knife ( or sharp raser blade) and split the connector down the dummy pin. Then connect each pin separately to the motherboard connector.

Read other 1 answers
RELEVANCY SCORE 50

I have a Dell Optiplex GX270. When I press the power button, the power button light turns amber, I hear some fans spinning, and the CD drive spinning. However, it never gets to the boot screen (or any screen). If I open the case and press the power button, however, the power button turns green and the computer works fine (loads all the way up and functions like normal). If I close the case after it has started, it continues to run fine. I'm guessing / hoping it's not the mother board or power supply that has directly gone bad... but maybe there is a connection or something? that changes from when it's closed to when it's open. I've heard of something like... the motherboard is shorting out by touching the case... but I'm not really sure where to look for that / how. Any suggestions would be appreciated! Thanks!
 

A:Solved: Computer boots fine when case is open, but won't boot when case is closed.

Read other 15 answers
RELEVANCY SCORE 49.2

hi all ,

i have a desktop

i changed my broken case to a new case like

i removed the HDD and the motherboard and the CD-rom ..etc and installed them to a new case

but when i press the switch button it works normally , and the screen display normally and there are no beeps , but after like 20 second my computer turns off automatically ! ,

what may cause this issue ?
 

A:i replaced all of my computer components from my broken case to other case

could be overheating CPU. Did you apply fresh Thermal paste to the HSF after reinstalling the motherboard? Is it tight and secure? Did you blow out all the dirt, dust and debris from the fans' fins?
 

Read other 1 answers
RELEVANCY SCORE 39.2

Looking for suggestions for a cheap case (cheaper the better).

Must have:
front and back 120mm fan spots (doesn't need to come with fan)
at least 5x 5.25" external bays
at least 1x 3.5" external bay
Fits ATX spec

On a budget, so the cheaper the better. I'm just replacing the case, so it doesn't need to have anything in it (PSU, fans, etc), but must be able to put them there obviously. I don't have brand preferences. Name as many as you can, since it might be a problem getting them where I am...
 

A:Looking for a computer case

I found this as the cheapest with all the features you want, except it has an 80mm front fan and a 120mm rear fan. If you really need that 120mm front fan, this has it for about $7 more.
 

Read other 4 answers
RELEVANCY SCORE 39.2

zipzoomfly sent me this.Does anyone know if this case is any good? It's a good pricehttp://www.zipzoomfly.com/jsp/ProductDetail.jsp?ProductCode=371295 Thermaltake Mambo
 

A:Computer case???

Read other 6 answers
RELEVANCY SCORE 39.2

I am looking at now changing my computer case, preferably to either a standard ATX desktop or a HTPC Media Centre Case, however I have a slight problem in the fact that I have a Xigmatek hdt-s1283 CPU cooler, which stands rather proud at about 20cm or so.... what I was wondering is if any of you techspot frequenters know of any desktop style cases that would cater for my cooler, or if as far as it goes I am fighting a loosing battle?

Heres Hoping

GThomp
 

A:New Computer Case

The Cooler Master Elite RC-330 is a decent, inexpensive case that will easily have room for that cooler.
 

Read other 2 answers
RELEVANCY SCORE 39.2

The Antec Nine Hundred or the GIGABYTE 3D Aurora 570 case? I am planning to upgrade my cheap Raidmax case once I'm done with the vid cards and such.
 

A:Better computer case to buy?

Read other 7 answers
RELEVANCY SCORE 39.2

I have a A7N8XE-Deluxe Mobo, and I would like to get a new case for it with more fans and better airflow since I overclocked the CPU in it. I have found several ATX cases, but the back doesn't match what mine does currently. How do I get the right case with access to all the ports in the back, like my four USB and two Ethernet ports. The cases I have looked at don't have spaces for those. Do I just rip out the whole back part of the case or is there a way to find the case I need that will provide access to all my ports on the back? Thanks for help in advance.
 

A:What Case Do I Get for My Computer?

Read other 9 answers
RELEVANCY SCORE 39.2

hi guysI have a computer case when i tried to open it . The power supply turn off after 5 minutes immediately. So what is the solution for this issue . Please help Regards 

Read other answers
RELEVANCY SCORE 39.2

Hi,

I have the following components in my PC:

GT 520 gpu
Intel i5 661 CPU
Gigabyte H55m-D2H motherboard (this is a small one, I believe it's micro ATX)
Two sticks of 4GB of RAM
ESI [email protected] audio card

I'm gonna stick with this build for a while (in fact, I don't see myself upgrading anytime soon - it runs great).

My case is big and makes a lot of noise (the fan is old...). I need a new one, and I wonder what compact cases are available for my setup. As you can see above, I do not use a gaming GPU, so I can probably make do with a thin case. The audio card isn't exactly tiny, though.

I'd appreciate any recommendations!

Thanks.
 

A:Need help getting my next computer case

This would be my pick, Excellent case IMO
http://www.newegg.com/Product/Product.aspx?Item=N82E16811139021
 

Read other 2 answers
RELEVANCY SCORE 39.2

hi guys I have a problem with another Computer case . The monitor hp type ( W2072a ) and the computer case type ( hp pro 3330 MT ) . The problem is message appear to me like this ( no DVI signal & no VGA signal ) . every time when i tried to open my computer i show this message .One from your comunity say to me i should to discharge  the electrical charges from the computer . and I thanks him a lot about this informationbut i have another computer case the same issue won't to resolveThis computer case i opened last week and it's work successfully but this days i don't know what's the problem . maybe some dust won't to remove . this is why i want to ask your comunity to get fast solution . and this why i prefer this site . to get fast information without i lost my time searching  .So  please help me . I appreciate your efforts to help  and i'm one of our fans  Regards 

Read other answers
RELEVANCY SCORE 39.2

Hello everyone, I'm looking to buy a new computer case tomorrow for my PC because I'm getting worried by all the clutter. Everything is too close for comfort. Lol. Now I've heard that the most "scary", or worrisome, thing is taking out the mobo itself because of the static and all. Um, I'm in need of some Windows 7 Jedi guidance from you guys. Tell me what you guys need so I can post my specs so you can help me out further. Thanks.

A:Computer Case help?

If you are worried about the static when you buy/order your new case pick up a 2-5 dollar static wristband. they connect to your wrist then ground to the pc

Read other 5 answers
RELEVANCY SCORE 39.2

Please tell me if I waste you peoples time. Im a fan of building computer cases.
Now I was wondering what you people would think of a cylindric case? You know, that look like a bin (or a very large coffee tin) or something. Then you put the mobo near the bottom but not too close to it, put air intakes near it and one BIG extractor fan on top of the case. No corners for heat to gather
Posted via Mobile Device
 

A:Computer case?

For home-made... if you know how to work with tools, metal, plastics, etc...

You could make one... doesn't mean it'll work any better at cooling.

There are round computers out there.
 

Read other 1 answers
RELEVANCY SCORE 39.2

I recently changed my computer case and after some struggles successfully moved all the hardware from my old case to the new one. It's a P4-1.7, DVD, CD, Nvidia GeForce FX 5600, Sound Blaster Audigy 2. The thing is, when I power the computer up I get no picture on my screen, so I'm wondering if it just has to do with the screen or the computer is just powering up and not actually turning on. Could someone please help me, I think it might have to do with how I connected the wiring to do with the hard drive, CD, and DVD.
 

A:Computer Case-NEED HELP

Disconnect everything except the processor, video card, memory, and floppy. Try and boot it and see if it posts with video. If it does just start adding one device at a time back
 

Read other 3 answers
RELEVANCY SCORE 39.2

I want to run a computer out of a plastic bin. If I lay the MoBo and powersupply on the bottom, then duct tape all of the peripherals to the side... will it run? Would it do better out of a cardboard box?
 

A:No computer case?

It should work. Depending on the type of plastic you may have static electricity so be careful. It would probably run equally as well in a cardboard box. Honestly though, why not just buy an inexpensive case? Even the cheapest case would be better than a plastic bin or a cardboard box.
 

Read other 2 answers
RELEVANCY SCORE 39.2

I am about to build a new computer using an Asus motherboard appr 10 x 12 inches.
Since I am reluctant to install the motherboard in a vertical position I wonder if
there are cases into which I could install my motherboard horizontally.
So far I found none.

Any suggestions

Thanks

AntonABC
 

A:Computer case

Read other 6 answers
RELEVANCY SCORE 39.2

Hey everyone! It's jsut a quick post, but I recently finished a brand new computer build, but I am worried my case doesn't supply enough cooling, but also don't like the nosie it produces during gaming, so I am wondering if anyone knows of any good cases under £50/$60. I have looked at the powercool dominator and am wondering if it will be enough (http://www.amazon.co.uk/Powercool-D...9?s=computers&ie=UTF8&qid=1362519059&sr=1-109).

My build is as follows:
- AMD 8350 CPU with stock heat sink/fan
- Gigabyte 7950 triple fan graphics card
- 16GB RAM
- SSD & Hard Drive (not performance, but more energy saving)
- CIT basic case modded with an additional fan on the side
- ASUS M5A99X Motherboard
- 880w PSU

Thank you for any advice! It will need to have high cooling abilities, but also quite quiet!
 

A:Computer case for $60?

- Noise from case is 95% the fault of the fans. More expensive cases provide quieter fans, but you're paying a lot more to start with anyway. Plus, you'll have to provide your own additional fans in most cases (pun not intended) anyway.
- PSU fan could be loud..?
- Cooling performance is a combination of how neat your build is (cables etc), the amount of components, the type of cooling on your devices, fans used, and airflow provided by case. This is a lot of variables, so it can be hard.
- The case you linked is a budget case. Don't expect miracles.

- My suggestion - stick with what you have, tweak the fan speeds a bit.
 

Read other 1 answers
RELEVANCY SCORE 38.8

I have an Acer Aspire X1700 (Details
It's about 2 1/2 years old now. Came with Windows Vista, I upgraded it to Windows 7. Also has a newer video card than what came with it.

Anyway, The PSU fan is getting really obnoxious, it gets really loud (more or less like a lawn mower). I have taken the thing apart and have tried every suggestion given to quiet it down, which it does for a whole week or two. This is a small form factor PC, so to even take the power supply out you have to basically take out everything else just to get to it. I have looked for replacements but they are very obsolete. It's only 220W anyway, so i'd like something a little more powerful.

What I want to do is get a larger case that I can use the same hardware is (motherboard, drives, etc) and purchase a larger power supply for that case. 220W really limits the PC. The small case holds a lot of heat even with all fans cleaned and working properly. Even just taking a CD/DVD out that was in it is very hot. I want a case with better airflow than this one.
I really am not sure what kind of case to get that will meet my needs. I don't want anything really fancy. If possible I'd like to get it off newegg.com

Any suggestions would be great.
 

A:Solved: Replacing Small Form Factor Case with bigger case / new PSU

Read other 7 answers
RELEVANCY SCORE 38.8

My friend let me have his old Cooler master 430 black elite, Im having trouble with it. My computer wont turn on, I know all my components work because they just came off my old case and they worked great. The difference between my case and this new case is the system panel cords(ie. hdd led, reset sw, power led, and power sw) are all seperate meaning there are 5 different cords compared to the one that my old case used to have one bundled up. I've looked online on how to connect these and nothing seems to work. Anyone know how to connect these cords to my intel g41 chipset?
 

A:Computer won't turn on in new case

you can get a Q-Connector or look for a diagram of your board and it will tell you what goes where. What board do you have?
 

Read other 14 answers
RELEVANCY SCORE 38.8

Hello All,
I have (unfortunately) an Acer Aspire X3910 desktop computer.
I have had it 6 months and it been in for repairs three times already.
One of the main problems I'm having with it is that the case is very small.
And the inside gets very hot Acer has hat to replace the computer once
and change the hard drive twice.
I was advised that I should change the case. However I don't know the
form factor that I need to buy. The information that Acer states is that its
a "Small Form Factor" but when I try to look for it I can't find that form
factor. Could someone tell me what form factors I can use and if possible
recommend a case.
Attached are images of the case I have and other information.

Any Help Will Be Appreciated

A:Need Help Choosing a Computer case

If the case is SFF, you don't want another one of those, since that is the root cause of your overheating. Any standard ATX case will fit your motherboard. However, your current PSU might not fit, so you will need a new PSU.

Your attachments provide no useful info. Provide a link that shows the inside of the computer.

Read other 7 answers
RELEVANCY SCORE 38.8

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 3:49:40 PM, on 8/13/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\LEXBCES.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\LEXPPS.EXE
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\Program Files\Nero\Nero8\Nero BackItUp\NBService.exe
C:\WINDOWS\system32\nvsvc32.exe
C:\Program Files\Common Files\New Boundary\PrismXL\PRISMXL.SYS
C:\WINDOWS\ehome\RMSvc.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\dllhost.exe
C:\WINDOWS\system32\wscntfy.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\ehome\ehtray.exe
C:\WINDOWS\system32\RUNDLL32.EXE
C:\WINDOWS\RTHDCPL.EXE
C:\Program Files\Java\jre1.6.0... Read more

A:Just Having A Computer Check Up Just In Case

Hi,

The only problem that I see here is that you don't have an Antivirus and Firewall running and that your Windows is not up to date.
Any reason why you don't secure your computer?

Read other 6 answers
RELEVANCY SCORE 38.8

well i was wondering what would be a good overall computer case that is compatible with atx motherboard...im trying to find one that has good ventilation and good cooling...thanks in advance
 

A:Whats the best Computer Case?

Read other 16 answers
RELEVANCY SCORE 38.8

Today I found I have a filter on the front of my case that sits in front of a 120mm fan ... and it was clogged with dust ! so I took it out and cleaned it, and now my temps are down by a lot !, I'm still finding out things about this Computer

Filter



Temps

A:Computer Case Filter

Hi Ciara...Yeah...I have to clean my PC at least once a month as it does p/u quite a bit of dust. A few puffs of canned air into my PC\Laptops does wonders. I do the same to all my computers\Laptops. I think I'm going to give my hardware a cleaning...that's for the reminder...

Read other 3 answers
RELEVANCY SCORE 38.8

I've been shopping for a case to build my system around. This one is found at CompUSA and has a 300w PS though not a name brand. I did some digging on the web and actually found a review of this case. I was wondering what some of you guys think of its specs

Case Review

Maybe some of you who have built systems would know if this type of case would make a decent build or not. I want to go with an Athlon XP1500 m/b in it. I don't know if I should buy my own PS to put in it or use the one it comes with, its a brand called Power-Win.
 

A:Good Computer Case or Not?

Read other 8 answers
RELEVANCY SCORE 38.8

Howdy,

I'm considering buying one of the cases and would like your opinion.

http://www.g-news.ch/articles/nhp200nc/

Thanks in advance.

Spaceman
__________________
 

A:Is this a good computer case?

Looks like it might be a little tricky to upgrade. Otherwise a fine looking case.
 

Read other 3 answers
RELEVANCY SCORE 38.8

My existing PSU is very loud and the case doesn't look great.

What information shall I post so I can get help regarding the title.

Thanks in advance.

A:Need help buying PSU & Case for computer

Your system specs are most important, it lets us know how much wattage you'll need to sufficiently power your rig and also the motherboard model will help us determine what size case you'll be needing as well. Once that is all posted, we can continue on to recommendations.

Read other 9 answers
RELEVANCY SCORE 38.8

hello everyone. im looking into buying a new case for my computer. i currently have the stock case that came with my sony vaio pcv rx860. I was looking to get one of the more custom cases ive seen on the web. my main concerns are if the vaio components will be easily transferable to whichever custom case i end up choosing. as well , are there certain types of cases i need to stay away from or that i should look at specifically ? ive never changed the case on a computer before and the vaio i have has a very interesting way of opening up. is there a site or set of specifications i should follow before choosing my custom case ? thanks.
 

A:Computer Case Question

Read other 10 answers
RELEVANCY SCORE 38.8

PICS IN PAGE 2


Okay, I have decided that my next computer is going to be a mini-ITX. Ever since PC makers decided to embed a LAN card and sound card onto a motherboard, and put in a graphics card slot into a wee 'lil motherboard, I don't really need anything bigger.

Anyway, I set out looking to BUY a mini-ITX case, but kinda came up short. They are really REALLY small... Most of them don't even use ATX spec components. Slim optical drives, slim heatsinks, flex-ATX PSU....

So I decided to build my own mini-ITX case. Gonna be an Aluminum frame, and aluminum/fibreglass cover and front. Fibreglass because its much easier to work with (IMO), and doesn't cost a bomb (like carbon fibre).

My list of spec:
1. Fit a mini-ITX board.
2. Fit a full, tower size CPU cooler. For overclocking, and quiet operation. (which is why I started the Venomous X thread)
3. Fit full ATX sized PSU. I've set the length of this PSU to 14cm, which is the length of my current 650W Antec PSU.
4. Fit my current graphics card (GTX 260). From my proposed layout and calculations, I should be able to fit something a few cms longer.
5. Fit 2x 3.5" HDDs.
6. Fit 1x 5.25" Optical drive.
7. Fit a 120mm exhaust fan or bigger.


I did some calculations, designed a layout by researching what works and what doesn't, and came up with this sized box (excluding the front bezel): 230x200x340mm.

That seems to be the smallest I can make it to fit everythin... Read more

A:Building a computer case

I do not see any issues in size. In fact, I have seen a shuttle system with a Core i7, 3 HDD's, and an HD5970 in it:
http://i995.photobucket.com/albums/af75/uniquepower/IMG_3256-1.jpg

If you are building an aluminum frame, I recommend using right angle pieces. They are very easy to work with, and very strong and light when you are done. Also, remember when you are making the cardboard replicas to leave space for the cables. In a cramped environment, they take up a lot more space than you might think.

Here is the worklog for an ITX HTPC I am building right now. It does not meet your specifications, but it does use a full ATX PSU, and it might be helpful for ideas, and for working with the aluminum.

http://www.thebestcasescenario.com/forum/showthread.php?p=274546
 

Read other 36 answers
RELEVANCY SCORE 38.8
RELEVANCY SCORE 38.8

I'm going to buy a new computer case so that I can customize it etc. I want to put a window in the side panel, so I'm wanting someone to recommend the best way to go about it. (cutting etc)
That's it.
 

A:Customized Computer Case

I'm not personally too familiar with customizing cases, but I know if you do a web search for "case mod" or "case mods" you can usually turn up some pretty good information.

Also, I know alot of companies carry items to mod your case with like neon strips and such, and alot of times they have FAQ's right on their websites.
 

Read other 2 answers
RELEVANCY SCORE 38.8

I have this older computer case meant for a Duron process but I have been trying to adapt it to this Palamino processer with a MSI motherboard. I cannot seem to get the air flow right. I have been reading about it. I keep getting the blue screen when I close the sides of of my computer case. I have a fan in the front, air coming in and a fan in the back, air going out. But that wasn't not enough , so I cut a hole in the side and put a 92mm fan there. I'm thinking of putting this larger 120mm fan and cut a bigger hole. I have the air going in on the sides but the case still seems to get hot, causing system instability. As long as I have the sides open, I don't have any blue screen and not any problems. I'm thinking maybe I should have the air flowing out on the sides. Any ideas?
 

A:Air flow in computer case

Read other 6 answers
RELEVANCY SCORE 38.8

My computer keeps shutting down when playing games or converting movies. I changed RAM (then putting old modules back because they weren't causing the problem), bought a new PSU and installed 2 aditional fans. It didn't work. So, my "diagnosis" is that dust is causing the problem. I need some advice about cleaning the case, removing the CPU heatsink and stuff like that.

A:Cleaning the computer case

  
Quote: Originally Posted by 4eyed


My computer keeps shutting down when playing games or converting movies. I changed RAM (then putting old modules back because they weren't causing the problem), bought a new PSU and installed 2 aditional fans. It didn't work. So, my "diagnosis" is that dust is causing the problem. I need some advice about cleaning the case, removing the CPU heatsink and stuff like that.


Dust can build up on the CPU fan and prevent proper cooling. This can be cleaned without removing the heat sink by using those cans of portable air blast. Take the case outside and being careful to not loosen any of the internal connections. blast the inside of the case and especially around the cpu with the air and that should help. Carpets/cats/dogs/people create dust and it tends to build up on the fins for the cpu cooler and prevent proper cooling.

Give this a shot and see if this helps.

Rich

PS: I do not recommend removing the heat sink as you will need heatsink grease when you reseat it. Also you take the chance of unplugging the cpu and they are dog to replace properly without bending pins which will ruin your whole day.

Read other 9 answers
RELEVANCY SCORE 38.8

I have a Antec 300 u 3 case which needs cleaning inside and vents on side and front of the case.

Due to my disability I can not pick the case up and clean it.

Is there another way which I can clean the case with out opening it please

thanks

werewolf
 

A:cleaning a computer case

Read other 7 answers
RELEVANCY SCORE 38.8

I read about this case by Zalman that is totally silent, but keeps the system cool.
It looks really neat to me, but it got me wondering what the best case out there is.
Of course, this is subjective, I know.

Criterion, in order of importance:

1. It keeps the system nice and cool
2. Itís quiet
3. It doesnít involve any water pumps or coolent
4. Itís nice-looking

Whatís your fave?
 

A:What is the best computer case (chassis)?

Read other 7 answers
RELEVANCY SCORE 38.8

A friend dropped off an IBM 300 GL for repair but the case is locked and the key has been lost. How can I get inside the box?

Thanks!
 

A:Lost Computer Case Key

1 - try a generic PC key, if you have any.

In the OLD days of 486s and beyond (AT cases) the key was a joke since there was only 2, maybe 3 different keys made Oh, thats keyboard Keylock. Still a joke.

2 - May have to HACK the case open, hacksaw, screw drivers. Metal shavings from damaging the case can easily short out the board...

3 - Try to locate another 300GL and hope it has a key that may open it, but considering that the GL series were the business line, that means there could be different keys depending on the purchaser.
 

Read other 3 answers
RELEVANCY SCORE 38.8

Hi guys, I'm building a new PC and I was just looking for a case and a tv tuner. I am also accepting advice for other parts. Here is the Computer so far:

Processor: Intel Core 2 Duo E8500
Motherboard: Asus P5QL-EM
Hard Drive 1: Samsung SpinPoint F1 HD103UJ
Hard Drive 2: Samsung SpinPoint F1 HD103UJ
Optical Drive 1: LG GDR-8164B
Optical Drive 2: LG GDR-8164B
Graphics Chip 1: Inno3D GF GTX 280 Overclocked PCI-E 2.0
Graphics Chip 2: Inno3D GF GTX 280 Overclocked PCI-E 2.0
Sound Card: Creative Sound Blaster X-Fi Titanium Fatal1ty Champion Series
Network Card: Bigfoot Networks Killer NIC K1 Card
Wireless Networking: D-LINK DWA-542 Wireless 802.11 Draft N PCI Adapter 802.11B/G/N
Power Supply Unit: Amacrox Free Style AX1000-EP
CPU Cooler: Cooler Master V8
Operating System: Windows Vista Ultimate x86
Keyboard: Logitech Cordless Desktop Wave
Mouse: Microsoft Wireless Laser 6000
Monitor: Dell 2408WFP
Speakers: Logitech G51

I'd like the case to have good airflow and preferably to stop most noise at a decent price, (definitely no more than $150) and the TV Tuner to have dual receivers and recording abilities.

Thanks in advance
 

A:Computer case and TV Tuner

Read other 6 answers
RELEVANCY SCORE 38.8

my friend was working today and the chick who house he was workin on got a new pc and gave him her old one so he had no use for it and gave it to me...i need to get in it to see how everything is and what not...
it says Planet systems on front case...i dunno how to open it...my last old pc u just unscrew 4 screws and case poped off....this 1 has many screws and there directly on back...i dunno if the holding the fan and stuff in place or what....any1 every dealt with one of those be4?
 

A:How do I open this computer case ?

If it's an old PC, is it a vertical or horizontal position one? I've got an old horizontal one that you had to unscew 5 or 6 screws on the back and the top and sides came off very carefully. Just make sure you don't unscrew the Power Supply screws!!!!

And since it's an old one that you just want to tinker with, at least you don't have to worry about messing anything up too bad
 

Read other 6 answers
RELEVANCY SCORE 38.8

I wanted to buy a bigger case for my computer so I can upgrade my psu and get a full size graphics card will my motherboard fit inside any standard case?

A:New Case For Dell Computer

It should...but we need the specific details of you Dell PC. If you would fill in your system specs in you profile area then we can get a better picture of your needs.

Read other 8 answers
RELEVANCY SCORE 38.8

I have been searching for a tower case to either build or have built, a new computer.

So far, it looks like a Chemming tower would be a good choice but in the reviews, I see people saying that you need very long SATA and IDE cables. They mention 36" cables. It seems like that is a pretty long cable to be using so I thought it might be good to ask for some opinions on these cases and that cable length.

Thanks
 

A:Anyone here using a Chemming computer case?

I think 36 inch cables would be for server towers, if you are buying an ATX case then stardard length cables should be ok.
 

Read other 2 answers
RELEVANCY SCORE 38.8

i want to paint my computer green but i have no idea what kind of paint to use. it's an off-white metal case. do i need to use spray paint or hand paint? what can i do to make the surface smooth and soft? thanks!
 

A:how to paint a computer case...

Read other 11 answers
RELEVANCY SCORE 38.8

Can both side covers ff a computer case be removed? I can remove one of the covers dead easy just by removing the two screw at the back. But When I come to remove the other side, i cant get it off with just removing the two back screws. The reason I want to get it off is beacuse there is a screw with the bottom pointing up into the case. I think the head of the screw is underneath the case cover i cant get off. Any help would be nice and I would be grateful. Thanx
 

A:Opening Computer Case

Can you not see the screw that is underneath the cover through the side that you have already removed???
 

Read other 6 answers
RELEVANCY SCORE 38.8

I am looking for a new case and PSU for my current computer and my next computer after I upgrade

--------------------------------------------------------------------------------------------------------
Current System Spec
--------------------------------------------------------------------------------------------------------
Q6600 3.0GHZ
GIGABYTE EP45-DS3R
6GB PC2 6400 800mhz (2x 2gb/2x 1gb)
Nvidia GTX 275 896mb
Asus Xonar DX soundcard
Windows 7 x64
Jeantech 1000W PSU

Operating system is on 2TB drive
++ two 1TB data drives, one 500GB drive (all sata drives)
--------------------------------------------------------------------------------------------------------
I will be replacing the budget £30 case I currently use and the "Jeantech 1000W PSU".

After a lot of research the best candidates in my opinion:

Coolermaster CM 690 II Advanced Case (£75.33)

Corsair 750W HX modular PSU (£110.11)

My concerns are whether these will be suitable for use after I upgrade. I will be investing ~£1000 on my next CPU/motherboard/RAM/GPU and will be upgrading to whatever offers the best price/performance. I could upgrade now but have been advised to wait for the next generation of hardware to hit which should spawn some bargains on the current top hardware.

Considering my budget I do not want to overlook a quality case and PSU. The Coolermaster CM 690 II Advanced offers versatility with modular drive bays and the like. I don't know whether 750W will be enough though. To n... Read more

A:Looking for a replacement PSU and computer case

Excellent picks. Both of them should do fine for all your future upgrades.
 

Read other 5 answers
RELEVANCY SCORE 38.8

Hello. This may sound like a very stupid question, but I just got this computer for a great deal but the guy forgot to give me the key so I can't open it to upgrade it. Is there a simple way to pick the lock or perhaps a universal tool I can buy? From what I know, only the really old computers required keys, but I guess I was wrong. I tried to look this up on google, but once I typed in the word "key" into any sentence, all I got was threads about how to crack programs and stuff.
 

A:Can't Open Computer Case - I Don't Have the Key!

Read other 11 answers
RELEVANCY SCORE 38.8

I put my part of my one computer into a new case so I could make room for a new computer but I have a little problem now. All I did was to take all my parts out of my one case which I will be putting new parts in and put them into my new case and in my device manager now I have an exclamation mark in other devices and it says pci device. I did not put any new parts in I just had to take them out to move the mobod etc. The only thing I have in a pci slot is an audigy 2 zs gamer which has not caused me any problems before. It works great and everything seems to be fine. I have xp pro with an amd 4400+ along with and ati 2600xt.
Anyone seen this before?
 

A:Put my computer into a new case and now a little problem?

Is there a PCI device that this could relate to? I.e. do you have another PCI device that this could be?

IF there is then it's possible that it got damaged when it was being moved to the other case.
 

Read other 7 answers
RELEVANCY SCORE 38.8

I have a G9657MA-8EKRS2H motherboard that I would like to place in a case to build
a PC. I have several old computers & cases that I have collected in the past. For example could
I use a Dell 3000 case for this board? I have several simular Dell computers with celron processors
in them. Maybe I could salvage a case/power supply from them?
How do I choose a computer case for this mother board. What factors do I use to choose a
computer case? I guess I need to look at fan placement and venting. Form factors etc.
What do need to consider here?

Thank you,
 

A:Choosing a computer case?

Dell cases are proprietary ie they fit dell mb. Choosing a case is a VERY subjective endeavor; ie what I like may not be what you like. Here is a decent atx type case that will do the job for you.
http://www.newegg.com/Product/Product.aspx?Item=N82E16811129042
This is a basic case without windows, lights, etc.

Here is a more high end case with lighted fans, etc.
http://www.newegg.com/Product/Produ...p=Cat_Computer_Cases-_-Spotlight-_-11-119-213
 

Read other 2 answers
RELEVANCY SCORE 38.8

I decided today to change my PC case, which I have done previously witout a hitch. However, today I bought a evil looking Demon ATX Computer Case and I can't figure out where to put the front panel wires. They are all marked oddly with "Data +1, Data -1, Gnd 1, VCC 1, etc. How do I know where they go? My motherboard book (GA-8IPE1000) does not make it very clear what I have to do to get anything to work. Any help would be appreciated. I have gone to Gigabytes homepage but really gleaned nothing there. I can't find a home page or manufacturer for the case. Thanks very much
Noiro
 

A:Demon ATX Computer Case

If you saved the receipt, you can take it back and get an easier one. Or you might be able to ask the store where you bought it for help....
 

Read other 3 answers