Over 1 million tech questions and answers.

Solved: windows 2000 pro- driver for a modem-never heard of this modem-help

Q: Solved: windows 2000 pro- driver for a modem-never heard of this modem-help

Windows 2000 pro

Just put this operation system on and it won't find a driver for the modem. It had windows 98SE on it and put windows 2000 pro reset it to NTFS and got the system going etc. I took the modem out. It isn't in a pci or isa slot it looks like a miniture APG Slot. A little brown slot above the pci slots looks only a couple of inches long. If anyone knows what you call that slot I would like to know. Anyway All it says on the modem is this

AMR 2002/16
MODEL fb pctel AMR
Cyber Solutions Corporation

Any help would be great. Thanks

RELEVANCY SCORE 200
Preferred Solution: Solved: windows 2000 pro- driver for a modem-never heard of this modem-help

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Solved: windows 2000 pro- driver for a modem-never heard of this modem-help

Read other 8 answers
RELEVANCY SCORE 103.2

Windows 2000

I know I have the modem hooked up right, I know the dial up is hooked up right, It keeps saying there is no dial tone so I unchecked the dial tone detection and you could hear the modem dial up right away but it would dial once and then nothing. There is a phone dialer hooked up on this computer will that make a difference if it will dial out or not? there is only one place to plug the RJ11 line in. Most have the phone jack and the line jack this one doesn't. This guy had a bunch of spyware and a few trojans etc on his computer and asked it I would help him. I caught a bunch of stuff but I have to be able to dial up so I can update the programs I am running. Need some suggestions, Thanks The modem is a HCF 56K MCI Modem and like I said it is hooked up right you can query it and it gets answers and no dial tone but unchecking the dial tone detection box you can then hear it dial up but does it once and then nothing. I no the line is good.
 

A:Solved: Windows 2000 SP4- has modem and phone dialer- can't get modem to work- Help

did w2k id it or did you supply the drivers?

2k doesn't like a lot of hardware.
 

Read other 3 answers
RELEVANCY SCORE 84.4

I cannot find a driver for my modem for Windows 2000. What can I do? System cofig. AMD 200, 64mb ram, Windows ME and WWindows 2000 dual boot, Atlas Perphials 56k modem.
 

A:Modem Driver 2000

As they went out of business, there may not be Windows 2000 drivers....you can try here though for one that may work....

http://www.atlasperipherals.com/support/ldrvrs.html
 

Read other 2 answers
RELEVANCY SCORE 84

I'll be concise:

* Said computer is old, fixing for a friend.
* Recognizes EtherNet modem fine - easily gets online.
* Have switched slots, but still won't "see" modem. Modem type is:

CREATIVE MODEM BLASTER DI-3635

I can't seem to find a driver that will make Windows acknowledge it's existence.

Anyone please feel free to either AIM me (JamesCNMcKinney) or respond via forum. Thank you.
 

A:Solved: Windows 2000 Pro won't recognize dial up modem...

Read other 16 answers
RELEVANCY SCORE 81.6

i have a modem "hsp56 mr"
amd athlon 1800+
if anyones interested this where i got the particular pc
it seemed like a kicka** deal at the time still does regardless
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2053229285&rd=1
anyhoo
i'm using xp pro service pack 1 2002
it seems to have this deal where it take an hour to log on then just sputters out after home page
earthlink advice to update driver . that's been a bit of a problem
as i went to the manufact. website i couldn't find my modem.
yeah i know i'm "disturbed" but if anyone has any ideas that'd one less facit of technology i 'd no longer be ignorant of
 

A:hsp56 mr modem need driver xp modem website stupid jerks

Try the link below for your driver for xp.

http://www.windowsxp-drivers.com/drivers/50/50274.htm
 

Read other 1 answers
RELEVANCY SCORE 80.8

I am helping an older lady put in a modem. We had a storm and it blew her modem out cause she did not unplug the phone line.

Hers in an old Gateway computer with windows 98
I took a modem out of an older HP computer with windows xp on it that I had to help her out. Got inside her computer and the modem she had was hooked in an APG slot with a wire going to the motherboard. I uninstalled her modem and unhooked it and took it out. My modem is for a PCI slot (I hope I am right that it will make no difference) I put mine in the pci slot and started her computer and it reconized the modem right away but has not got a driver for it. Her old modem was in a APG slot and was a us robotics 56k voice win.

The one I put in is in a pci slot and is a Agere systems PCI soft modem. on my computer it said under driver in the modem area that the driver was a 2.1.51.0 I have no clue what that is. It said provided by Agere also---- Device ID = 11c1-048C It says INF file oem27.inf does that mean I can download it onto a cd from my computer? if not do you no where I can get a driver for it? I need it ot put on hers cause it reconized the modem so it sounds like as soon as I can get a driver she will be able to dial up. I tried going to www.agere.com but it hasn't got anything for soft modem. I have her computer apart and the modem installed and she is waiting for me to come back. Can someone help soon? I will wait as long as it takes. I know your busy. Thanks
 

A:Solved: Old Gateway windows 98-Need driver for a modem-Can someone help??

Read other 16 answers
RELEVANCY SCORE 76.8

hi, need some help: just installed 2k in dual boot with 98se, and cannot get my 56k modem to work in 2k, the reason being it's in Com5 in 98 and installs in Com 1 in 2k : is there any way to fix this? U S Robotics fax PCI with latest drivers.
Any help would be appreciated, thank you.
lcdor
 

A:[Solved] modem in win98/2000

Read other 9 answers
RELEVANCY SCORE 75.6

I know you used to be able to setup Microsoft Fax on Windows 95/98 computers to share the fax modem. Anyone aware of a way to do this in Windows ME, 2000, and/or XP?
 

A:sharing fax modem with Windows ME, 2000, or XP?

Probably the same way if it still has MS Fax installed. It's not the greates program and I could never get it to work. Always used WinFax Pro for a fax server program.
 

Read other 3 answers
RELEVANCY SCORE 74

Hey, I am trying to install a USB WWAN modem on my Vista laptop (2.33 ghz, 2 gb ram) and when i follow the instructions on the software provided, it says to insert the usb modem and let windows recognize it and install it, and go from there.

the problem is, once i put in the usb drive, vista recognizes that there is a new device in, but once it tries to install it, it won't recognize any drivers on the disc thats inserted, and doesn't find anything on the rest of the computer.

the modem has been successfully installed on two XP machines, and one mac, so i know that its possible to do, but its not letting me do it on my laptop...

Any help would be appreciated, thanks

Hermitt

(modem is a Novatell Wireless Ovation EV-DO modem, or verizon USB727)
 

A:USB modem WWAN modem won't install in Windows Vista

I would say check the mfg website and see if you cant find some updated drivers for it or even check google and see if anyone has "hacked" the XP drivers into working with Vista. I know that Vista's been having lots of issues with past and current third party products and so it could just be that your modem is incompatible with Vista or you just need to look a bit more for newer drivers.
 

Read other 2 answers
RELEVANCY SCORE 74

i recently upgraded to windows 2000 on my computer the silly thing connect but as soon as it starts to log me on it disconnects and starts to redial, ive already tried uninstalling and reinstalling the modem, and software and the tech wennies at aol have no flippin clue either can anybody please helpppppp!!!!!!??????????????
 

A:unable to connect using modem to internet on windows 2000

Hi,

Why not give the following a try:

1) Download the newest and latest drivers from the modem manufacturer’s website. (I know, you have a disk, but download the newest and best anyhow.

2) Enter Start, Control Panel, System, Hardware, Device Manager and DELETE any references to any modem.

3) Shut down and physically remove the modem and then put the modem back in PCI slot #3 (Third slot down from the AGP slot)

4) Boot up and enter the BIOS setup menu.

5) In the BIOS setup menu find the PnP area. If you are running WinXP or win2k, then DISABLE Pnp….however, if you are using Win98, then make sure it is ENABLED.

6) Save and Exit

7) Boot back up and when the computer finds your modem, then load the drivers that have been downloaded from the manufacturer’s website. It may tell you that the latest and best are already installed, but install them anyway. (for example, WinXP and win2k only have v.90 drivers and not the most recent v.92 that are needed for best operation) If it says they are not digitally signed, then load them anyway. This is a long story, but I can assure you it is a money issue and a rip off from Microsoft in my opinion.

This should get you going!
 

Read other 1 answers
RELEVANCY SCORE 74

I installed five pci motorola modems in my computer that is running
windows 2000 advance server so that i could implement a RAS
server but only one modem is working and the remaining modems give the error " can't open port" when you query them
and i tried to install more com ports but i got the error "error code
10" . please heeeeeeelp.
 

A:modem installation in windows 2000 advanced server

Hiya and welcome

Have a look here and search for Code 10

http://support.microsoft.com/default.aspx?scid=kb;EN-US;q245386

Also, have a look here:

http://msdn.microsoft.com/library/default.asp?url=/library/en-us/w2kmsgs/1270.asp

Regards

eddie
 

Read other 1 answers
RELEVANCY SCORE 73.6

I just bought a new 56k modem because from my desktop I was only able to connect at 28.8k. With both of my laptops I'm able to connect from the same wall jack and the same ISP at speeds between 48k and 50k. But from the desktop I'm stuck at 28.8k, every time I connect.
 

A:[SOLVED - REPLACED MODEM] Slow Modem

Read other 16 answers
RELEVANCY SCORE 73.2

I am looking for a Modem Driver for a

Aopen FM56-PLM P/N : 91 AC001 368 S/N 20127541TCE3
 

A:Solved: Modem Driver

Read other 7 answers
RELEVANCY SCORE 73.2

I took the modem out and it says Ambient on the board. I installed Win 2000 on the machine and everything is fine except the modem doesn't work. I used the install CD that came with it to install the driver but it says it's not the correct driver. The box says it is compatable with Win 2000.
 

A:[SOLVED] I need a Modem Driver. The Box says v.92/v.44 and thats all

Read other 9 answers
RELEVANCY SCORE 73.2

I cannot get my modem to work. It is identified only as PCI Communications device. Windows cannot find a driver on C drive or from Windows 98 CD-Rom. I have also tried a second modem with the same results. It has Lucent ID on it and a number cw56Lu on the back. I am using Windows 98.4.10. Thanks for any help you can give me.
 

A:{SOLVED}no driver for modem

Manufacturer:
Lucent Technologies

Device Type:
Modems

Model:
cw56lu-pci

File Name:
LTWinModem_v90k56flex_565.exe

Size:
1281847 bytes

OS:
Windows 98

Comments:
This driver was hard to find...it works for win 98 users ...apparently the old drivers are for win 95 and definitely doesnt work for win98

http://www2.driverguide.com/files/uploads5/2438/LTWinModem_v90k56flex_565.exe

or here is another
http://winmodem.nhvt.net/list.htm
 

Read other 2 answers
RELEVANCY SCORE 73.2

I am looking for a IBM ThinkPad R31 ,PCI Modem Driver for XP Pro

I downloaded driver mdtp1fxp does not work
 

A:Solved: R31 Modem Driver

Have a look on this page: http://www-307.ibm.com/pc/support/s...downloadsDriversLandingPage.vm&validate=false
 

Read other 2 answers
RELEVANCY SCORE 73.2

Guys, I need the modem driver for a Lucent/Agere Pinball modem. It came installed in my new Compaq.I want to use it in my older win 98 machine. I don't know how to identify it or find it. Can you help? Incedentlly, the old win 98 can't find a driver for it.
Thanks, Jim
 

A:Solved: modem driver?

Read other 8 answers
RELEVANCY SCORE 73.2

I've been searching the web for a Hayes Accura 288v 34 Data and Fax driver. I found some similar, but not an exact one. I'm putting the modem in an old comp running win98. Windows says it has installed it and device manager says its working properly, but modem diagnostics says it isn't. I'm sure it's possible it is defective, but would like to try it before I have to buy another one.

Any help would be greatly appreciated!

Thanks.
 

A:Solved: need a modem driver

Read other 12 answers
RELEVANCY SCORE 73.2

I recently got cable internet to speed up my online process, and not tie up my phone line as I take classes online. I have had problems with intermittant connectivity as the connection is lost about 30 seconds after going idle on a site. The data light on my motarola surfboard cable modem is on, so it appears data is getting through. Tech support from th cable comp has been fruitless. The first "cure" was to shut down the computer and unplug the modem, this works at resetting the modem and the connection, but it shuts off again in the same manner. A tech guy came to the house and said it was the computer, not my modem or connection. Has anyone heard of this, and does anybody have any suggestions, I am now slower than ever because im shutting down and restarting every 5 minutes. Please help.
Brascopt
 

Read other answers
RELEVANCY SCORE 72.4

I am having difficulty with the dialup modem in my new computer. It is a Motorola
SM56 Speakerphone Modem.

The tech folks at the builder of the computer have given me links to two downloads that,
hopefully, will solve the problem. One is for a "universal" modem driver and the other a
replacement Realtek High Definition Audio driver. I was advised to put the audio driver in place first.

My question is why would replacing the modem driver also require replacing the other
one, too?

My curiosity is just too great to not call upon you good people for some insight.

Thanks, {redoak}
 

A:Solved: Need for audio driver along with one for modem?

How old is this computer? Did the builder not provide the computer to you in working order with the modem functioning properly? If your computer is under warranty I surely would return it to the builder to get it working as it should.
Is this a replacement modem? Is the sound card also not working?
 

Read other 3 answers
RELEVANCY SCORE 72.4

I've been told (not here; elsewhere) that it's a good idea to update your modem driver. Since my office computer is well over 2 years old, I thought I would give it a try -- except, I can't find the driver I need. I have a U.S. Robotics 56K WIN INT modem in my Toshiba 3100 computer. I have the product number, but not here at home where I am typing. I've tried the USROBOTICS and 3COM web sites, but can't seem to find anything. Can anyone here tell me where/how to look?
 

A:[SOLVED] locating a modem driver?

Read other 8 answers
RELEVANCY SCORE 72.4

Can't seem to update driver...driver I have is dated 4/01, driver I dn loaded is 12/01...when I try to install it , XP says it can't find a better driver than the one i already have...need to change it because unless I shut my modem off the scanner(Visioneer 8100) doesn't seem to work right (Visioneer emailed some tech info). I emailed us robotics and they woun't help me because I's an oem (God, I hate oem stuff) so now i have to lug this computer to the computer store because over the phone they haven't got a clue. To make matters worse, I have a 900# block on my phone and can't call Visioneer, the free number you just sit and wait for an hour or so, so i hung up . I think i should have bought a HP scanner. This is so confusing. Guess I'll start to write my letter to the phone company to get rid of that block (they want it in writing) Maybe somebody out there has an idea? Thanks.
 

A:[SOLVED] Modem driver Blues

Read other 15 answers
RELEVANCY SCORE 72.4

Hope someone can help. I can't seem to find the driver for a Lucent Win Modem. My OS is Xp. Really be grateful for help.
 

A:Solved: help with locating modem driver

Read other 12 answers
RELEVANCY SCORE 72.4

ill make this short and sweet :

I HAD a dial up modem in my pc (winXP), i converted to dsl
i removed the modem and installed it in my neighbors pc (win98)
it is 98 compatible, but i cant find the disk... and can only find an update driver on the net
i dont think i actually 'removed' the driver from my winXP pc.
so... where is it in here? can someone point me in the right direction so that I might save it to a floppy and install it in the win98 pc????
is that possible
or
can someone give me a link to download it off the net and save to a disc?
its a BroadXtent v92 pc1 D13631-1
i looked at us.creative.com and only found an update driver... i dont think that will work
the modem is installed, but windows98 is not detecting it, and i can not find it on the 'list' of modems to chose from

thanks!

 

A:Solved: Modem Driver Search...

try this site, join up, I found lots drivers over the years

http://members.driverguide.com/index.php
 

Read other 3 answers
RELEVANCY SCORE 72.4

Hi, I can't find my modem's CD that came with my PC, so I tried finding my driver on the net. I've searched about six different so-called driver databases, searched 3Com's and Dell's site without luck too. The only pieces of info I have to go on are: Dell calls it "3COM Robotics V.90 PCI Telephony WinModem," on the card itself is a sticker reading the product number, "3C0426297400-03010." There's another sticker, with barcode, reading, "1265-957-6147, DP/N 0002513E REV. A00." I have nothing else to go on. This modem just came with my Dell so it's probably is cheap and as standard as you can get. Any help is greatly appreciated!
 

A:{SOLVED} Desperate for a modem driver!...

Read other 8 answers
RELEVANCY SCORE 72.4

On my home XP, under System Info, when I look at the Modem info, says "Driver: Unknown". I have been having problems with that viral ISP...AOL, with constant disconnects and all that wonderful junk that AOL HELL throws at one. Using their AUTO-MESs (not auto-fix, for sure)...said my modem was not the greatest one for them...all of a sudden snubbing my poor modem, which until now has just fit right into their little club. I have an "Conesant HCF V90 56k DataFax PCI Modem, Current driver version 2171.25.0.

Do I/should I do anything regarding this modem situation, with the unknown driver. It has a Device ID# under Signed Drivers, but says Driver Name: Unavailable.

Advice, if you will....pleeeeeease???? Much appreciated...have to be able to use AOL to get a new ISP and get rid of AOL!!

Thanx again!! Happy Friday!
Leeann/parrotplay
 

A:[SOLVED] Do I need to update Modem Driver?

Read other 8 answers
RELEVANCY SCORE 72.4

toshiba satellite 2520 (I know, it's old), win98, doesn't want to accept kingmax v.90 56k fax modem. May have something to do with pcmcia slot not being type II? Is there a way round this.
 

Read other answers
RELEVANCY SCORE 72.4

Is there some sort of infection that can cause a modem to dial strangely? My modem tones when dialing sound truncated and I get the recording saying that the call could not be completed. The same thing happens if I use dial in Hyper terminal. If I remove the modem in device manager prior to turning the system off then it reinstalls on the next boot and works until the following boot.
 

A:Solved: Modem Driver Corruption?

Read other 6 answers
RELEVANCY SCORE 72.4

I feel so stupid right now. I'm about 95% sure the answer is 'yes'.

If I have a disk with modem drivers can I install the drivers on more than one computer?
I think yes because can't you uninstall them and then reinstall them sometimes?
 

A:Solved: Modem driver ? (It's really dumb)

Sure. You can also go to the site of whomever made the modem and download the driver. Quite often the mfg has newer drivers on their site than what come on a support CD.
 

Read other 1 answers
RELEVANCY SCORE 72.4

I had to download the updated drivers for my computer that has windows 2000 loaded on another computer. The drivers were too big to copy to a 3 1/4 floppy, so I copied the drivers to a cd disc. When I try to update the drivers using the cd disc, the pop up screen say "this is not a valid mfg hardware update." I know they are valid because I copied them from the mfg website. How can I get these drivers installed in c:\winnt folder since the first place the installation looks for is files that are under this particular folder first and then ask if you have disk. Any help will be gladly apppreciated. Thanks

Ja50us
 

A:Trying to get modem, video, and audio to work with Windows 2000 operating system

Hi ja50us, Welcome to TSG !!

I did the exact same thing. I downloaded the new drivers for mine to CD (video, MB, audio, nic, etc.). I opened device manager, Right clicked the device I wanted, selected properties. Clicked on update driver, Then pointed to the cd. Found the driver and installed it. Did that for each one.
 

Read other 2 answers
RELEVANCY SCORE 72.4

I've been having issues with my cable connection and bought a new wireless cable modem to see if that was the problem...was able to connect on the laptop without any problem but have been having the same issues connecting (server not found). Before I was receiving packets but wouldn't ever send more than 1514. Now I send 1 packet and receive none. I can not find an ip address through ipconfig and when I try to renew it says to remove nic card...I uninstalled and reinstalled though auto detect but to no success. Any ideas would be appreciated.
 

A:Windows 2000 LAN/Cable Modem will not connect on desktop but does on wireless laptop

your title says laptop is working ok

can you confirm all the PC's laptops etc, how connected and what works or not

then on the machine which does not work

Ipconfig on Vista
Vista does not handle permissions the same as XP.
Locate the command prompt short cut in your start menu. Right click it, choose run as administrator, then try the ipconfig.

If you want to always have the command prompt run with elevation
Right-click the command prompt icon, choose Properties
Select the Shortcut tab
Click on Advanced
Check Run as administrator
------------------------
can you do the following tests Post back the results of all the test - clearly labeled which is which - ie pc / laptop
its important to do all the ping tests

1) Ping the default gateway
2) ping google.com by the name
3) ping google using IP address

all details below
ipconfig /all

TWO Methods to do that - some people have problems with ONE----

ONE ---------------------------------
start
run
cmd
ipconfig /all

rightclick in the box
select all
enter
control key + C key - to copy
then reply here and
control key + V to paste

TWO -----------------------------------------------

Start, Run, CMD to open a DOS window and type:

IPCONFIG /ALL >C:\RESULT.TXT

Open C:\RESULT.TXT with Notepad and copy/paste the entire results here.
------------------------------------------------
try ping the name and then the IP see below

start
run
cmd

C:\Documents and Settings\wayne>ping {the default gateway ipaddr... Read more

Read other 1 answers
RELEVANCY SCORE 72

Hi
i have a modem Cisco/Scientific Atlanta, dpc2100 Series, and i don't find anyway to make it works with usb cable, i doesn't install in my computer and there's no driver for windows 7, what can i do ?
I have a driver for windows vista, i think it may work but the driver is not .exe and when i go to get it from the folder in device manager it says no drive found, probably because the computer knows that's not for windows 7, is there any other way to instal it ?

Thank you very much

A:No windows 7 USB driver for my modem, how do i do ?

Hi Welcome to Seven Forums ... Are you using 32 or 64 Bit OS ? ... Have you tried the Erthnet connection ? ...

Read other 9 answers
RELEVANCY SCORE 72

Hi chaps,
Any ideas where i can find a driver to work a rockwell 56k acf 2 fax+data+voice modem?
It worked in Win Me but not in Win Xp?
Any help?
Thanks for any help
later
 

A:modem driver for windows zp

Try here.....

http://www.modem-drivers.com/companies/902.htm

Debe
 

Read other 1 answers
RELEVANCY SCORE 72

Hi all
I install windows 7 but it doesn't detect my modem
I searched on the internet but i can't found
U.S robotics 56k voice win int
can anybody help me?

A:modem driver in windows 7

Hi and welcome to TSF please post the make and model of your computer or if custom built the make and model of the motherboard

Read other 1 answers
RELEVANCY SCORE 72

Hi,

I've 56k PCI fax/modem modem although I upgrade from windows 98 to windows me. I tried to installed windows 98 driver when I saw that there's an error. I looked at the modem box where I saw only windows 95, 98 and 2000 except windows me.Where will I download windows me driver for my modem?

Thanks a lot,
 

A:HSP Modem Driver for windows me ???

Surfbug, PLEASE stop opening duplicate posts for the SAME problem....if you'd reply back to the thread, you'd get more assistance!

I answered your PM.....now POST THE DETAILS I ASKED FOR!

http://forums.techguy.org/showthread.php?threadid=61115
 

Read other 1 answers
RELEVANCY SCORE 71.6

Toshiba Satellite model A55-S326

There are no sound or modem drivers that I can find at the Toshiba site for this laptop. See attached image of the the ID sticker on the bottom of the laptop. Anyone know where I can find them?

FYI: I don't have a system recovery disk and don't want to pay $50 shipping to get their "free" system recovery. I've installed Windows XP Pro with SP3 from an off-the-shelf retail disk. I have everything working except the sound and modem.
 

A:Solved: Need sound and modem driver for this Satellite A55

Read other 6 answers
RELEVANCY SCORE 71.6

I have this modem in a pc I am donating to a student at school but heck if I can find the driver for it on Creatives Website.
http://www.creative.com/products/product.asp?category=7&subcategory=40&product=8989
 

A:Solved: Creative Modem Blaster Driver

Read other 8 answers
RELEVANCY SCORE 71.6

A friend has a new PC (Compaq Presario SR2000/SR2119uk) and needs to access the internet via dial up.

I can't seem to find any drivers for any of the modems I have.

The most succesfull one is a Conexant RH56d-PCI R6795-12 modem which I seem to get a generic driver for, but it won't detect a dial tone so doesn't work.

Just spoken to micro direct to see if any of their modems have Vista drivers and they say no !!!

Any ideas ?

Final plan was to install XP, but when I tried that it won't even boot from the XP SP2 disk, gives a blue screen crash - any ideas on this would help too

Thanks
 

A:Solved: Modem Driver Connexant R6795-12

Read other 8 answers
RELEVANCY SCORE 71.2

I replaced a hard drive and did a fresh install of Win 98. I am unable to get the modem to work. The modem is recognized in the device manager, but when I try to use it, I get an error message #603, modem is not responding. Before changing hard drives, this modem worked just fine. Also the previous hard drive was loaded with Win 95. I have tried two (2) different sets of drivers, to no avail. Any help would be greatly appreciated.
 

A:[SOLVED WITH NEW MODEM] Modem not working

Read other 8 answers
RELEVANCY SCORE 71.2

Hi everyone, this is my first post here.

I'm trying to get my old computer fixed up with windows 98 for my grandad, and ive been having various troubles:

First with my old ess solo-1 1938S sound card... which i managed to get working, by changing its driver resources in the Windows 98 hardware device manager, it was conflicting with the graphics card.. by default :s

My graphics card, a very old card, was also having trouble, things looked blotchy and messed up, but I managed to fix that with an older driver (instead of the window 98 default)

The only thing that isnt working now is the modem, an internal PCI 56k Rockwell RS56 R679311, the driver installs and Windows 98 says that the device is working properly, but when I try to dial a number or even look at diagnostics, the system reboots, by experimenting with installing and uninstalling it it has also given me the blue screen of death, and then rebooted, two times that it has rebooted it has cleared all my connection and dial-up information.

So far I've tried changing its device resources, but all this has done is made the system crash totally (but not reboot) and had a look in my motherboard BIOS for any clues; Ive changed a few things in desperation, like the default modem IRQ (which doesnt mean anything to me). And changed the IRQ list from automatic to manual, but nothing has had any good effect.

Any help appreciated; its a 450Mhz Athlon K6 with 128MB RAM, some ram is EDO, some is DDRAM, all at 100Mhz I t... Read more

A:Modem driver and windows 98 troubles

Ive had to give up with it all,

Now I have an external modem... which doesnt work either, its not even recognised, is this a BIOS problem?

What is wrong with this piece of crap?

*screams*
 

Read other 1 answers
RELEVANCY SCORE 70.8

This post is just a "heads-up" for anyone who is looking to upgrade this ESS modem driver (see title of this post for exact modem) to run with XP HE.

I recently had to upgrade an ESS Modem driver so that my ESS modem would run with XP HE. I had previously had W98SE on a machine that I installed XP HE on. The modem is an ESS ES56CVH-PI Data Fax Voice Modem. The modem ran fine with 98SE on the machine, but when I installed XP, it wasn't even listed in Device Manager. And the XP CD Driver Library DID NOT have a driver for this particular modem.

I ultimately found the upgrade, XP compatible, driver for this modem at both the ESS web site and also the DriverGuide.com web site. The file is named M2EM_XP_2188h029.ZIP

One thing you need to bear in mind if you want to use this driver - EXPAND THE ZIP FILE AND THEN USE THE SETUP.EXE FILE (DOUBLE CLICK IT) - IT CAN'T BE INSTALLED USING THE .INF FILE METHOD FOR "ADD MODEM" OR "NEW HARDWARE".
 

Read other answers
RELEVANCY SCORE 70.8

Hi.

I am having trouble with my friends Compaq evo 510. The OS is windows 2000 pro.
The computer has the swannsmart II V92 internal modem but the computer says it was not installed. Device manager didn't see it but in internet properties/settings/properties says "(uninstalled)swannsmart II V92 internal modem com3"
(This may not be exact as I'm recalling from memory. I can't start the offending computer)
I have installed a swannsmart II V92 internal modem driver but the computer froze during installation. I restarted it and now it will not even try to start.
I do not have his OS disc.. Neither does he so I can't use it as a boot disc

Does anyone know how I can fix this.

Frustrated..
 

A:Solved: computer freeze after installing modem driver

try removing the modem and turn on the pc the let see if it will work and then try reinstalling the driver. I suggest to use the latest driver for the modem, there is always the net to check for lates driver for your modem.
 

Read other 3 answers
RELEVANCY SCORE 70.8

Clueless one here.

I purchased a Dell Inspiron 4000 Laptop through an old workplace several years ago and want to connect it to the internet using a 3COM FE575C-3COM 10/100 PCMCIA card with a dongle. The laptop is still set up to connect through a VPN that no longer exits (old workplace went under). and I'm not sure if that's hindering things. That'd be great to erase all settings for that if someone wanted to walk me through it, but that's not the main reason I need help. I am the "admin" and have the "admin" password on the laptop.

First off, the laptop can see the hardware (ethernet card) when I insert it, but the connection is NOT showing up on my Netgear router that is connected to my Comcast Cable Modem (which is currently working on my MAC and how I'm typing here). When I go to set up internet connection on my laptop, I'm pretty clueless as to what to do (obviously not dial-up). I've created about 2 new VPN's, but nothing works. I don't have wireless, but I did have a wireless card that was able to get me onto the internet a few times (presumably mooching bandwidth which I don't want to do), so I know it can work or at least should work with a correct card set-up. I don't know if the hardware I bought is bad, the internet connection is just not set up correctly and/or why my router is not even seeing my second computer.

HELP!
 

A:Connect Dell Windows 2000 Laptop via cable modem using a router and PCMCIA LAN card

Read other 7 answers
RELEVANCY SCORE 70.4

XP insists on installing the wrong modem driver as below:
info was obtained by Device manager's interigation of the modem

Modem type: Sportster MessagePlus Pro V90 PnP
Modem inf path: mdmusrg.inf
Modem inf section: Modem10

which also provided:
ATI3 - U.S. Robotics 56K Pro Msg Ext 12.2.8
ATI4 - U.S. Robotics 56K Professional Message
which is the corect identification of the modem

I have tried removing the modem from Device manager and then using Control Panel Add Hardware but
this insists on finding the modem and and identifying it as
Sportster MessagePlus Pro V90 PnP
If I try to update the driver by pointing at the correct inf file "mdmusrmo.inf"
I get the following report "The wizard could not find a better match for your hardware than the software currently installed"

As windows wizard incorrectly identifies the modem is it possible to bypass the wizard and manually set the correct modem type as
U.S. Robotics 56K Professional Message
and then update the driver?
 

A:Windows XP installs wrong modem driver

Problem Solved

While BRVP Classic Phone Tools 6 takes notice of WinXP's installed driver and will not work with my modem. Not even allowing its own messages of average 7k to be downloaded to the modem stating that the max size is 30k

During Instalation SuperVoice Pro 6 interigates the modem and would seem to ignore WinXP's driver and set the modem up correctly and allowed me to download a message of 40,464k.
Well done SuperVoice:​up:
 

Read other 1 answers
RELEVANCY SCORE 70.4

i am not able to find the driver for window 8.1 in my dell inspiron and this window is aldready installed from your company and now i am facing problem for finding the driver of my usb modem online also..will you please help me in this

A:problem in finding driver for my modem in windows 8.1

nishantsoni1996You will need to post the specific model of your computer in order for the forum members to provide you with the correct information. 

Read other 1 answers
RELEVANCY SCORE 70

Hi All,
I have Laptop Toshiba Satellite L775, windows 7. I used cable modem Motorola SURFboard SBG6580 and it was working fine. Then I changed my ISP to Century Link and used their DSL modem and still everything worked just fine. Now I moved to another city and used same cable modem (SBG6580) and connected my business PC thru ethernet and it is working fine. The problem is with my laptop which I tried to connect wirelessly but coudn't so I tried to connect it thru ethernet but it does not even recognizes it. Funny thing is my hard wired computer has picked up same network name thru modem and is working fine both thru ethernet and wifi (this computer I am using first time with this modem).
My laptop find available networks and when I select my network with password, some time it says connected with limited access and some time "windows was unable to connect" message. I tried most of the solutions by calling Suddenlink and Motorola but no luck. I am wordering if it has to do anything with centurylink's DSL modem being used on this laptop before and somehow blocking cable modem?
Any help?
 

A:Solved: Cable modem to DSL back to cable modem-now my laptop can't connect to interne

Read other 10 answers