Over 1 million tech questions and answers.

Hp pavilion x2 10inch detachable screen stays black

Q: Hp pavilion x2 10inch detachable screen stays black

Basically I go to switch the tablet on and the power button lights up but that's it the screen doesn't even light up nothing and occassionally a light flashes from the top on the screen in the middle but that's it I've tried resetting it everything please help I bought it for uni and I start in a few days

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Hp pavilion x2 10inch detachable screen stays black

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 95.2

When I try to turn on the tablet the on botton shows like is on but the screen remains black at all atimes. It does looks like its charging when I plug the charger just fine. But it does not makes any sound or have shows any picture. Thanks in advance.  P.S It havent been dropped is 6 months old.

Read other answers
RELEVANCY SCORE 95.2

Hi, Just bought a HP Pavilion x2 - 10-j000na (ENERGY STAR) which arrived 2 days ago. Has been working fine - and battery charge was about halfway down. Had no problems until this evening when I'm getting no response whatsoever from it. Tried plugging it in with the adaptor, and also starting it on just battery power - but screen remains black, no lights, nothing. Any clues?? :/ Thanks.

A:Pavilion Detachable - Black Screen

Hello @Yool, Welcome to the HP Forums, I hope you enjoy your experience!  I have read your post on how your notebook computer is not able to power on, even though it is plugged into the AC adapter, and I would be happy to assist you in this matter! If your computer is powering on, but there is no lights illuminating on the device, I recommend following this document on Computer Starts but Screen Remains Blank (Windows 8). Should the machine not respond at all when the button is pressed, I alternatively suggest this document: Computer does not start (Windows 8). This should help restore the display to your notebook computer. If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.htmlI hope this helps!Regards

Read other 3 answers
RELEVANCY SCORE 95.2

Hi. I just bought a HP Pavilion x2 Detachable and already have problems with it. I turned on this morning,it turned on ok. I done all the set up required,got a couple of apps,then left it. 1 hour later when I wanted to watch a film,i couldn't turn it on. It would not turn on. The mouse cursor is there,and if I press and hold for a few seconds the power button,a message saying "Slide to shut down your PC" appears and no matter what I do it won't turn on. I have tried all the "F" buttons,"F11" "F8" "F4 ....all of them basically,but nothing. It's really frustrating,this is my sons gift from Santa,and he can't even enjoy it. please help me.. Should I take it back or what's the best thing to do??Thanks

Read other answers
RELEVANCY SCORE 95.2

When I try to turn on the tablet the on botton shows like is on but the screen remains black at all atimes. It does looks like its charging when I plug the charger just fine. But it does not makes any sound or have shows any picture. Thanks in advance.  P.S It havent been dropped is 6 months old.

A:HP Pavilion x2 Detachable black screen

Hi there @bfeliciano86,  Before I provide troubleshooting documentation, I would like to take a minute to welcome you to the HP Support Community, where you can ask questions, find solutions and get help from others! I will do my absolute best to help you resolve the issue you are having with the black screen on your HP Pavilion x2 Notebook PC.  Note: please make sure that the AC adapter cable is not plugged into a power strip, surge protector, or secondary power source. It should be directly into a wall outlet. Please note remove any and all USB devices. Disconnect all non-essential devices, as these could cause some issues. As silly as it sounds, did you happen to try removing dust from the cooling areas in a notebook?Have you connected the Notebook to an external monitor or TV? If you remove the notebook battery, plug the AC power cable back into the notebook, then turn it on, does it power the Notebook? Do you have any beep codes or blinking LED lights? Have you done a BIOS reset?Have you tried performing a hard reset?Have you tried to see if you can test for hardware failures? If the computer is on, do you hear the fan running? If so, but the display remains blank, please see Computer Starts but Screen Remains Blank. If you require further assistance, I would be more than happy to help! Please just re-post with the information required from above. Pleas... Read more

Read other 1 answers
RELEVANCY SCORE 94

I just bought this computer/tablet and have had it for 2 days. It started up right away and worked fine. Later in the day, I went to use it, I was able to sign on, but then the screen went black - still plugged in. The next day, it started up just fine and I was able to sign on and use the machine, but later in the day the same thing happened - able to sign on but got a black screen. Today, I have tried numerous times and was able to actually get a screen once and tried to troubleshoot on the HP website and my browser shut down and I have not been able use it since - still able to sign on but always get a black screen. I have shut down and restarted numerous times.I really would like to be able to use this machine, but it doesn't appear too promising.Thank you.











Solved!
View Solution.

A:HP Pavilion x2 Detachable PC 10 Black Screen after Signon

  Hi @RandiRushe , Thank you for visiting the HP Support Forums and Welcome. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link to get the support number for your region. They will be happy to assist you immediately.Thanks.

Read other 4 answers
RELEVANCY SCORE 86.4

When I turned on my laptop just now it started up normal but then went to a black blank screen instead of my desktop..I ran a hard disk test and the test said replace hard disk..I don't understand any of this what possibly happened? Or how do I fix this issue? Please I need help!

A:HP Pavilion dv6000 stays on black screen

Thank you for joining in on the HP Support Forums and Welcome @Dawndi85.  I will do my absolute best to help! You had mentioned receiving a black screen on your HP Pavilion Dv6000 Notebook PC and you had done a disk test and the test had said to replace the hard disk.  Do you have recovery media?Can you please let me know the error codes or exact error/response of the hard disk test? Here are two documents that will help you troubleshoot to find out the deeper cause. Hard Drive Failure Errors: Imminent Failure, Smart, BIOHD, HD535, etc.Testing for Hardware Failures.Have you tried to Restore the BIOS? If not, please try this step first. Then, just to be on the safe side, back up your data that way it does not get lost. However, there might be certain conditions that cause a hard drive failure message to display when a problem does not exist (a false positive). To fix false positive hard drive errors, please try updating the hard drive firmware. Have you backed up any of your information? If not, here is a document for you on Backing Up Your Files (Windows 10, 8). You may be able to get your stuff off the hard drive. I would much rather see you safe than sorry.  Could you please provide me with your Model Number (How Do I Find My Model Number or Product Number?) and Which Windows Operating Systems you are running. Please let me know if these steps resolve... Read more

Read other 1 answers
RELEVANCY SCORE 84.8

HP logo appears in middle of screen then a message appears (that is too quick to read) then switches off.  Had to record a video so that I could read the error message.  ---Owned for less than 3 weeks and very annoyed that  havent being able to use for over 3 days so far because no support available at weekends!!! Above issue  started Fri evening and went to HP support page.  When finished completing form, I thought I was getting somewhere  to learn no support available at weekends. Assumed support form would be logged but as no phone call or email recieved, take it that it was never received by support. Came back today to see that support LiveChat and phone are now closed.  PROBLEM Has anyone here had this issue of switching on then getting intermittent whirring noises, beeping noises that goes on for approx 1min 22sec then the HP logo appears making you think HP-Pavilion 27_a175na   is turning on but instead a quick message appears on the screen then switches off? You switch back on and same thing happens! If so, how did you solve it? Here is  my  YouTube video showing   the noise issue and error message  Suggestions on where I go from here, or what to do, to get it switching on and working again? Thank you

Read other answers
RELEVANCY SCORE 69.2

Hello there,

So as the title says, I'm having some problems with my computer. I bought it about 4 weeks ago, and no issues with it other than when I try to play an MMO that would make the graphics card work. The graphics card that is installed in the computer was separately bought and installed, so I'm thinking it might be conflict issues with the card, but I don't know.

The way it happens is, I run the games, I can play for anything from a minute, to 15mins and then my screen says it has disconnected from the image, goes black, and I can hear my computer restart, but my screen stays black. I have to manually power off and back on for my screen to start showing images again. Once restarted i get the "Problem Event Name: Bluescreen" thing.

It's really annoying since I just bought GW2 and I can't play properly any help would be appreciated.

Also, in the Action Center it's said that my Nvidia Graphics Card has stopped working or crashed, multiple times, naming the exact times my computer crashed.. which is why I believe it has to do with my card.

A:BlueScreen playing MMO's. Screen Goes Black, Restarts and Stays Black

Code:
BugCheck 116, {fffffa800cf0e010, fffff88010aee630, ffffffffc000009a, 4}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+ade630 )

Code:
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Tue Oct 02 19:21:13 2012 (506B3099)
Follow these steps:STOP 0x116: VIDEO_TDR_ERROR troubleshooting
Overclocking -
I recommend if you are overclocking any hardware, that you reset these values within the BIOS to their default values in order to increase the stability of your system.

Please run the following tests for your graphics card and RAM:
RAM - Test with Memtest86+
Run Memtest86+ for least 7-8 passes, and preferrly overnight as it can take a while to fully complete.

Test each RAM stick individually, if an error is found then move the same RAM stick into the next DIMM slot and test again, if errors are found for the same RAM stick in every available slot then you have a faulty RAM module. On the other hand, if no errors are found in the next slot or the other slots for the same RAM module, then you have a faulty DIMM slot.

Test each RAM stick and every motherboard DIMM slot available.

Graphics Card:Video Card - Stress Test with Furmark
Read all the steps within the hardware test tutorials very carefully,... Read more

Read other 9 answers
RELEVANCY SCORE 66.4

    I have a Lenovo Yoga 13 that is out of warranty. I bought it in 2013.  With that out o' the way, my Lenovo Yoga 13's screen stays black even when the power is on...I see no Lenovo logo or anything AND the laptop keeps restarting on its own, so it is stuck in restart mode, with the screen staying black the whole time.  This laptop has been doing this (black screen even though power is on and shuts off and restarts on its own) for about 6 months now....(Jan 2017-June 3, 2017 as of this writing). This laptop works WHEN IT WANTS TO EVERY ONCE IN AWHILE, BUT NOT OFTEN.  I turned the laptop on now, and I'm typing on it now, **BUT when it doesn't work, which is most of the time**, it shows a black screen (I see nothing on the screen) even with the power on and constantly restarts on its own. Is this hardware issue a motherboard problem or a screen issue specifically? Specifically, is it the motherboard that needs to be fixed on this Yoga 13 or is it a screen issue? If it's a motherboard issue that needs to be fixed, how much would it cost? Or If it's a screen issue, how much would that cost to fix? Any help on this is much needed! 

Read other answers
RELEVANCY SCORE 66.4

Hello everybody, today my laptop has become blind. Let me explain:

My laptop was purchased in 2007
Specs:
Alienware m9750
Dual nvidia 7950 go
Dual core 2.0
2 gigs of ram
80 gb harddrive

So here's what happened, today I was watch s movie on netflix when suddenly my screen goes black. Though I had crashed but my laptop was still on and the sound was still going. restarted, and the initial screen was slightly pixellated and garbled. Which has now made my laptop permanent garbled and pixely. After the windows logo. My screen goes black, but I am still hear the windows start up sound. I found that I am able to click on some music files on my desktop that are able to play, so this is a video issue. I reboot in safe mode which works this time figure to disable and uninstall the videocard drivers. I restart and I'm able to use my pc somewhat normally( still garbled). Reinstalled the nvidia drivers then halfway through says: error install failed or something, it happen really fast then crashed, tried restarting atleast 20 times in safe mode but it freezes up after it tries to load partition(1)\windows\system32\drivers\mup.sys

All of the other options for start up(even last settings to work) the screen goes black after the windows logo. I have tried tinkering with the bios but it doesn't help. Its basically being blind using a computer. So I'm wondering if there is anyway to possibly blindly open up command prompt and possibly disable or uninstall the drivers from there, I'm ab... Read more

Read other answers
RELEVANCY SCORE 66.4

my screen stays black and shows the mouse icon and won't load my home screen?

A:my home screen won't load up my screen stays black and shows the mouse

Hello,

Try booting the PC into Safe Mode. Start your computer in safe mode

If successfully able to boot into Safe Mode try running a System Restore back to a date when it was working properly

Read other 1 answers
RELEVANCY SCORE 66

Hi,  My hp chromebook model 14-x030nr screen will not turn on. the battery light next to the AC plug blinks non stop with a white light.  The power light is on and doesn't flash.  I have tryed holding the power button down.  I have tryed unpluging and disconecting the battery and holding the power button.  I have tryed holding the power button and the reload button at the same time.  I have tryed holding the power + reload + Esc buttons at the same time.  Nothing seems to get the screen to come back on.  What is my next move?

Read other answers
RELEVANCY SCORE 66

So my hP g62 laptop starts up but the screen displays nothing. I've tried hard resetting multiple times but still nothing. I can hear the fans going and the lights come on. The charger port light is red as well as the wifi toggle button. The caps lock button blinks once every second.

Read other answers
RELEVANCY SCORE 66

hey i have just been given a computer and when given was working but would freeze nearly all the time, so i formatted it and it still froze alonmg the way, i have just recently changed the ram and it has not work so i put the old stick back in and it wont work at all now, the screen just stays black, please help
 

Read other answers
RELEVANCY SCORE 65.2

Ok so about a month back my lcd just stopped working. It has a lit background but it stays black. I called hp and they had me do some troubleshooting but it didn't work and they said my display was no good anymore so we left it there (I didnt want to pay all that money to fix it). About 3 days after that it magically worked again but one day it seemed like it was trying to go out again the picture got real grainy for a second then it went back to normal. Now I'm back where I started. I've tried everything, when I hook up an external monitor it works so it has so be lcd related. Any help/advice??
 

Read other answers
RELEVANCY SCORE 65.2

Yo.

Well, here's my problem; I've recently upgraded my Graphics card, Ram and Motherboard, and whenever I switch the power on, all the fans start up, but nothing appears on the screen. I unfortunately have no other DDR2 ram, PCIE cards or a motherboard that TAKES PCIE >.< So I can't test any of the components on their own, plus the motherboard has no on-board graphics.

I've had a look at the POST guide, and nothing from there appears to work. I've also tried disconnecting everything except the ram, graphs card and CPU, but again no change. Could it be that my Ram is faulty/incompatable? Fauly Graphics card? I know my CPU works because I've tried it in another computer, and it runs fine.

Any help would be appreciated. (It might take me a while to reply, sorry if that's the case.)

Specs:

MotherBoard: Asus P5B SE

LGA775, intel P965 + ICH8, Intel Core2 Quad-core CPU FSB 1333, Dual-ch DDR2 800, 6x SATA 3Gb/s, Gb lan, 6-ch HD audio, crash-free BIOS3, EZFlash2, Q-fan.​
PSU: EZCool ATX-450 JSP (450W)

CPU: Intel P4 3.2 Ghz

Ram: LD 1Gb PC-800 64*8 16c

1 GB DDR2 PC2-6400 DIMM 240 PIN 800Mhz​
Graphics card: ATI Radion Para-Souls x1650

PCIE 512mb 128BIT DDR2​
 

A:All fans come on, but screen stays black.

HDD seems to be active, and the drive reads the disk. I tried clearing the CMOS, no luck. Sorry, RMA?

Also, I have a 20 to 24 pin extention on my PSU, would that effect it?
 

Read other 5 answers
RELEVANCY SCORE 65.2

I got a new graphics card today (GTS 450) and I slotted it in, when I start it up the screen stays black, however, if I leave it for 20 seconds or so I can hear the windows start up sound.. I know my screen isnt gone because I've connected it to my laptop and it works fine. I have the Blue and White cable plugged in my monitor and my computer and still nothing, thanks.

A:Computer screen stays black

Do you get any signs of "life" (like the BIOS Info screen etc)
If so it's probably a driver issue (did you remove the old drivers before the switch) ?

If not, there are IMHO only 5 possibilities:
#1 The card wasn't seated properly -- reseat it
#2 The card draws more power than your PSU can handle -- get a better PSU
#3 you forgot to connect the extra power cable --connect it
#4 you bend one or more pins in the video cable -- replace
#5 The card is defective -- RMA

-DG

Read other 1 answers
RELEVANCY SCORE 65.2

Hi ladies & gentlemen, I live in France and I bought a Lenovo Y700 laptop in June 2016. I was very happy of it until one day when I wanted to boot the laptop, the screen stayed black. I know the system is working because the leds are on and I can hear the noise inside the laptop. I don't know what to do because my screen is black in every circumstances even if I tap F8 or F5. I have no access to the BIOS and when I tried to connect the laptop to my TV with the HDMI cable, it didn't work. Could it be a problem of graphic card ? The Lenovo support told me to factory reset with the button but it did not work either. Thank you in advance for helping me

Read other answers
RELEVANCY SCORE 65.2

I've had this before but can't remember what I did to stop it
It Is exactly like you pull the dvi/hdmi lead out of monitor/gpu everything still working i.e. if playing video on youtube it carries on playing just no picture.
I think it was something to do with Intel's built in gpu, but I have disabled it everywhere I can think of bios, device manager etc.
Can anyone through some light on this please as it's startingto annoy me now

My rig specs in sig.

A:Random black screen, rig stays on !!

When does this occur? At random? Only when videos/games are playing? Also, what is the exact behavior? Is the monitor giving off behavior as if it has lost its video source, like an error saying the source was lost or it is switching through different connections to find one? Can you tell if your system is locked up, or if it's still accepting your input? The best way to determine thsi is to have the display lost when playing a video, then pressing a key to stop/start playback.

If the monitor is acting like it's not connected to the PC, then it can be a bad video port on your card, a bad/loose video cable, or the monitor itself has a bad port or is just plain bad. You will want to start with potential physical suspects before dabbling with software. Have you tried actually running the video through your onboard video (make sure to enable it and stuff of course) instead of your graphics card and see if that worked?

Read other 9 answers
RELEVANCY SCORE 65.2

I just reformatted and installed Vista Ultimate x86. Whenever I shutdown my lappy via the start menu or press the power to do so, vista appears to be shutting down as the open windows close, but then my screen goes black and the power light, wlan, and bluetooth lights remain on. Those indicate the laptop is still running and to completely turn it off I have to hard-shut it by pressing and holding the power button.
I have a ASUS Lmaborghini VX2S for reference.

Read other answers
RELEVANCY SCORE 65.2

hello, this is ecobill. i am new in the neighborhood. I know a little about computers (enough to be dangerous); so, I need help once in while. Whenever I have trouble it is never the normal problems.
Because I lost the printer drivers and USB drivers on my present computer when I updated to XP Service pack 2 and I have been able to install them from any locaton.

I have received a used, but more updated computer. I was told it worked, but there was no rack for the hard drives that matched the screw holes. I adapted an old rack and when I turn on the power with the monitor attached, there is nothing but a black screen. The power supply appears Ok, because some of the lights come on; the hard drive is running; and the fans come on the motherboard and video card. The monitor is OK because I used it on another older computer. Also when I just unplug the monitor from the video card, the screen comes on. I tried another older video card in one of the shorter card slots, but it did work either.
Any ideas out there? Thanks
 

A:Monitor Screen stays black

Monitor stays black

I don't know how to reset the cmos unless you mean to pull the battery. I don't know about the BIOS bus for the video (I can't see any BIOS) settings. I removed the original AGP video card that I thought might be a problem and I put an older working video card (Trident) in another PCI slot and this made no difference. I pulled the RAM chips to clean the connections and reset all cables. I disconnected the CD drive, the floppy drive, and later the hard drive after checking each situation indiviudally, but this made no difference.

Another problem (may be related) is the on-off switch does not control anything. I have to use the toggle switch in the back. I checked the wire connection from the switch to the motherboard (Intel D845BG) and it looked OK.
Thanks
 

Read other 2 answers
RELEVANCY SCORE 65.2

2 months ago,my HDD IDE died because of "the click of death" thingy and now, recovers itself (its kinda weird),the windows starts normally,i couldn't hear any clicks from my HDD anymore but after a few days,when i restarted my PC properly (i restarted it from the "start menu")...here goes the "new" problem...i restarted my pc,my system info appears (the RAM and the video card thingy),then,the ASUS motherboard logo appears...and after that...a blinking underscore appears in a black screen...after a few seconds,the "blinking underscore" finally disappeared BUT my screen remains in blank and black and stays there forever,it didn't even reach the windows loading screen.I did tried to disconnect and connect my cables from the motherboard,i even tried to disconnect and connect my HDD from the motherboard and did the same with my video card and RAM but it didn't solve the problem.
WHAT IS REALLY THE PROBLEM?...IS IT THE WINDOWS OR MY HDD?

BTW EITHER OF THE TWO SAFE MODES ARE FREEZING WHEN I HIT "ENTER",
I'VE ALREADY CHECKED THE BIOS BUT IT SEEMS IT DETECTS ALL OF MY HARDWARE.

any help will be appreciated,thanks.

Read other answers
RELEVANCY SCORE 65.2

So, my computer has had this as a recurring problem for about a year now. After suffering some form of trauma, (a small child running into, someone tripping over it, etc.) my computer screen will turn a solid color, usually gray or blue. After shutting it down the monitor turns black and attempting to boot up the computer causes the monitor to stay black, though the fans in the case turn on and machine makes various clicks and whirs.

Every time this has happened in the past I have gone into the case, disconnected all outside cables, the video card, the battery on the motherboard, and occasionally other things as well, sort of haphazardly. I let the thing sit for a while and then plugged everything back in and after maybe one or two iterations of this process the thing eventually booted up.

After it's most recent trauma (having a laptop dropped on it =_=; ) it hasn't booted up properly after several unplug-and-replug-everything routines. The fans still start up, like before, but I haven't been able to get video to work. I have tried disconnecting the video card and plugging the monitor into the built in graphics on the motherboard but that still didn't work. While "on" I tried pressing various "locks" on the keyboard and found that numlock caused a light to light up, but neither caps nor scroll lock did ( I don't know if this means anything, but I figured I'd throw it out there ). No sounds are emitted by the speakers, but ... Read more

A:Screen stays black at all times

Yes replace the old power supply and back up everything important to you. Get those old hard drives replaced ASAP. They are slowing your system down at the very least
 

Read other 7 answers
RELEVANCY SCORE 65.2

Hi. My computer was running fine and then suddenly the screen went black.  I turned the power off and on and it came up with error message "Unmountable Boot Volume" and then tried to fix the problem but it just stayed on the black screen and never fixed the problem.  I turned it off, done the hard reset where I take out the battery and hold the power button for fifteen seconds but it is still the same. I have gone into the mode where I can try to restore the computer but it does not allow me to do that. It say's it is restoring and then just stays black.   I have also ran a report where it says the problem is "Hard drive Short DST Check: Failed" and gave me a code of 0SNHWW-7N987K-MFPWMG-60WF03. If there is anything that can be done to help me I would really appreciate it as I use this laptop for work and really need to get it back up and running urgently with minimal cost.  Many thanks for your help

Read other answers
RELEVANCY SCORE 65.2

After the screensaver automatically turns off the display (after 20 minutes), the screen STAYS black, no matter what I do it won't turn back on. I have pressed buttons on the keyboard, mouse, and turned the display on and off. I have to hard reset my computer... it sucks man! What is going on? I looked in the power options and sleep is on 'never' and turn off hard disk is on 'never'. I was looking for hypernation, but I couldn't find it anywhere. I deleted my hybernation files a while back because they were taking up space and I never had used it.

This has just started fairly recent, when I got my new video card (eVGA 9800GTX+ 512MB) it started doing it, but that is around the same time I deleted my hybernation files, that is why I suspect it, but I can't find anywhere to enable or disable it. I checked in power settings under advanced and it isn't there.

I have Windows Vista Home Premium 32bit

What's going on? I need help, this is driving me nuts, I am hard resetting my computer almost every day because of this. I don't want to shut off automatic display shutoff because my Acer X191W monitor gets hot and I like it to cool down when the screen gets shut off. (In the past I had this same model of monitor burn up on me, don't know why, but I suspect heat. This thing gets really warm after a couple hours. They sent me a new one for free then, but my warranty is up now.)

Help please,
Thanks,

Bushpilot
 

A:Screen stays black after screensaver

I would have to agree that deleting your hybernation files is probably the cause. Since they are only needed if you allow your computer to hibernate, there must be another step to shutting it off. It does seem like you checked the right places though. I would assume it would be in your power settings.

You might want to check you BIOS though. If it's disabled there, I'd think you'd be ok.

GL
 

Read other 2 answers
RELEVANCY SCORE 65.2

I have an Asus Eee PC that I got last year for my birthday. It has Windows 7 as the operating system. When I turn to computer on it seems to be working normal. When it comes time to log into a user profile and I click on the administrator profile (which is the one I use) and type in the password. The computer logs onto the profile but the screen stays completely black. I can still hear the computer running but the screen doesn't change. This has happened before but the toolbar was always visible at the bottom of the screen and now it's not. The only thing I can do with the screen black is type in Ctrl Alt and Delete to get the menu. Nothing on the menu seems to be helping with the issue.
I decided that I better see if the same thing was happening with my guest profile too. When I logged into my guest profile everything is working fine and that's what I'm on right now. However, the administrator profile has all my documents that I need for school and work so factory resetting or the possibly of wiping the computer isn't really an option.
Thank you for your time.
 

A:Computer Screen Stays Black

Is explorer.exe running when you look at the processes?
If it is, end the process.
Next press Ctrl+Shift+Esc to bring up Task Manager, and then go to File \ New Task (Run) and type in explorer into the run box.
Does your desktop appear?
 

Read other 1 answers
RELEVANCY SCORE 65.2

Hey,

Iv just installed a new CPU into my vista PC and now my screen says black. The PC sounds as if it is loading up like usual but my PC screen stays off as if my PC was off.

I even turned my screen off and on again but said it wasnt reciving a signal.

What should I do?

Thanks,
James.
 

A:Iv just installed a new CPU but my PC screen stays black

Read other 16 answers
RELEVANCY SCORE 64.8

I have an hp pavillion 9000 laptop. Its running windows vista home premium edition. I turned on the computer and it was showing me a message telling me whether i wanted to start in safe mode or repair window. I chose the repair window option. It did the window start up repair and then there was a message that told me if i wanted to restore to a previous time. I chose a date that i knew the computer last worked perfectly. It did the restore and then said it would restart.

It stayed on a black screen with a flashing underscore on the top left side. I waited 2 hours and it never restarted so i turned it off and then turned it on. It starts to load brings up the screen with a loading bar then it goes into a black screen and just stays there.

I tried loading it in safe mode and it loaded. Was able to back up my information. Restarted the computer and still the same just a black screen. I have searched all over but cant find a solution.

A:Windows will not load. Stays at black screen.

Worth a look, http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01997899&tmp_task=solveCategory&lc=en&dlc=en&cc=us&lang=en&product=1842189

Louis

Typically...black screen with blinking cursor in XP can be resolved by running the fixmbr command from the XP Recovery Console. Since you have an HP system, you may not have the RC.

Read other 5 answers
RELEVANCY SCORE 64.8

Here is what I have:A Samsung 40g hard drive as master, a Seagate 40g as a slave. A Sound blaster Live CT4760 model sound card, A d-link wireless wda 1320 AN asus AS99127F P4T-E motherboard, 4 256mb Samsung RAM sticks and An ATI radeon 8500 LE 64 m DDR graphic card.Ribbon cables.

My problem: when I turn on the PC, a few things happen. It asks then if I want to boot from safe mode, safe mode with networking, safe mode with command prompt, to try to restore to last known settings or to start windows normally.
I already chose all these options. When I do any of these things, the screen shows a white bar. It fills up to the end and Then nothing after that. When I chose the continue normally prompt, I took a 20-minute shower and returned. Still nothing. At that point I think that it should have advanced into another screen or something.

I am not sure what is on the master drive as it was given to me but i know that it worked at one point.
I would be open to any suggestions that don't involve paying extra money. I know that there is some way to make it work-with some help from smart people.
Also: i have two extra hard drives one is a 60g WD hd and one is a 40g WD.
-Thank you for reading, Bamabeast
 

A:I need help, my PC stays at black screen with white line

Read other 7 answers
RELEVANCY SCORE 64.8

I have a windows vista basic. Since I got a new video card installed, when I turn my PC on, it takes much longer to boot up and my monitor screen stays black much longer - waaay long. No problem after that, but am wondering why 'black so long'?

Any ideas?
 

A:When booting up screen stays black too long.

Read other 15 answers
RELEVANCY SCORE 64.8

For no apparent reason, there is a little black box on my screen with a white open, compacted arrow in it and inside the arrow an 'A' (see screenshot). The screenshot shows Mediaplayer open but it is there constantly, independent of which program I am using. It seems 'dead': clicking on it (either right or left) results in nothing. How can I remove it? Now that I have made the screenshot, suddenly there is an arrow through it.
Thanks for advice! IJmir

A:Unknown little black box with arrow and 'A' in it stays on the screen

since when is this house appearing?

Read other 9 answers
RELEVANCY SCORE 64.8

After hard reset the computer will not boot up just has black screen

Read other answers
RELEVANCY SCORE 64.8

i can see the screen being illuminated but i cant see anything, i hear windows starting up and everything... what could it be?
 

A:Screen turns on but stays completely black

If it's a laptop then the LCD lamp could be working but there's something else wrong with the LCD.

Can you see the bios screens and info right before the Windows starts?
 

Read other 3 answers
RELEVANCY SCORE 64.8

Hi guys

Has anyone got any suggestions to a laptop which boots normal with LEDs on and fan and hard drive starting up but the screen remains black with no light at all...

I am told that it could be the onboard graphics which is gone meaning the motherboard needs replacing.
Can anyone confirm that at all?
Unfortunately it is an out of warranty laptop.

Many thanks

this is an Acer Aspire lpatop with Win XP Pro
 

A:Laptop boots but screen stays black

Shine a strong light on the screen when the computer completes its boot up. If you can faintly see the desktop and icons. You may have a bad backlight lamp in the LCD panel or a bad DC-AC inverter that drives the lamp. Both can be replaced. Replacing the lamp inside the LCD panel can be a delicate operation if you attempt it yourself. The DC-AC inverter board is a separate assembly that can be readily replaced.
 

Read other 2 answers
RELEVANCY SCORE 64.8

Hey

When I go to turn my computer on it can't get to the windows loading screen it just stops on a blank black screen. I have/will upload a video of it happening to illustrate what is happening since I might not have described it well.

I can't post videos due to my post count but if you want to see it just PM me.

The last thing I remember my computer doing before it turned off was a virus scan then a few minutes later a blue screen with some white writing coming up so I rebooted and this happened. I have tried using my Windows CD to repair it but it hasn't worked. I can't get into safe-mode because it just stops on the black screen with white writing (Sorry for all these un-techincal names xD).

I was wondering if anyone knew what was happening? Ideally i'm looking for a fix for this so I can back-up some of my files onto an external harddrive then I want to reformat.

Thanks, Ash
 

Read other answers
RELEVANCY SCORE 64.8

I have a Gateway NE71B laptop, had for about 2 years. One day the laptop screen wouldn't turn on, but it would connect to the tv VIA HDMI. Just the other day the laptop couldn't connect to the tv via HDMI anymore. I tried taking the battery out and restarting it, but it still wouldn work. I have a serious problem and I need help! (WINDOWS 8)
 

Read other answers
RELEVANCY SCORE 64.8

When I turn my computer on I can hear it starting up and the lights come on to the power supply but the screen stays black.

Read other answers
RELEVANCY SCORE 64.8

Hi,  Since last week I have some problems with my new HP laptop (5 weeks old). Every time I leave my laptop and it switches to sleep mode (or wathever mode its called), the screen stays black. I get responses from my keyboard lighting etc. But the screen stays black. I have to shut down my laptop by holding down the power button, when it restarts, it works again.I also have to mention that my computer froze more than often the las couple of days, with only the internet on and my fan is making a lot of noice, with no heavy programms running.  Does somebody has any idea what the problem could be? Thank you in advance! Kind regards, Maarten

Read other answers
RELEVANCY SCORE 64.8

Hello anyone who can help!

I have a Lenovo Laptop Thinkpad Edge E520 8GB RAM, Intel CPU B960 Pentium Processor 2.2GHZ

Recently when I have powered up my laptop it occasionally doesn't load properly, the screen stays black. You can hear the laptop working fine but you cannot see anything.

This happens once or twice a week, I usually hold on the power button for 5 seconds, then reboot and it resumes my hibernate settings as usual

Could this be because I always hibernate my laptop?

Can someone please explain what might be causing this problem and how I go about fixing it?

Thanks in advance!
 

A:Laptop powers on but screen stays black?

Thats a fairly new laptop as i have the edge 530.ive never put any of my computers on hibernate so im not sure if that why its doing that. it sounds like either a power supply problem, a screen problem, or a harddrive problem.or rarely the motherboard.you might want to take it somewhere and have it checked out then you will know for sure and go from there.if you have an external monitor you can try and see if anything shows up on it. if so or even if the other monitor is black i would still start with the screen first as the problem.
 

Read other 2 answers
RELEVANCY SCORE 64.8

I have an Acer Aspire 1692 laptop and lately the screen doesn't work anymore. The computer starts up, all the lights are lit correctly, but the screen just won't show anything. Up to now I have already succesfully restarted it with the screen working, the only trouble is that I don't have a clue how I did it . In any case, now I can't seem to get it to work anymore.

I have read other forum posts about this subject, and there are some possibilities I have already ruled out.

The backlight is not broken, I think. I can't see anything when I shine a flashlight right into the screen, and besides, if it was broken I couldn't have got it to work two times, right?

When I hook up an external monitor, the screen is a bit botched (lines, a bit different coloring, stuff like that) and the computer automatically restarts when I log into Windows. That is definately not normal. Also, my button to switch to an external monitor is Fn + F5, but pressing it doesn't do anything. The laptop screen stays black and the external monitor stays botched.

The two times I got it to work, I was switching the external monitor between my desktop (where I was browsing the internet for a solution) and my laptop, and suddenly it worked. The second time I followed an instruction on Acer's support page (this one), and it worked again - So I thought I had it fixed, but the next time I started up the laptop, I had the same problem and so far it hasn't worked anymor... Read more

A:Acer laptop: screen stays black

So, I take it no one has an idea?
 

Read other 3 answers
RELEVANCY SCORE 64.8

I was attempting to watch a pornographic video that I searched for on google and the video would not play. Instead, it prompted me to update my flash player. Me being the genious that I am, I downloaded flash.player.hd.v10.0.exe. Immediately after I downloaded it, nothing happened and the video still did not play. That's when I knew I was screwed. Apparently, this has caused other people problems as well, (I got this info from a google search, so it may be unreliable). A couple of days after this happened, (for some reason I ignored the problem), Mcafee did an update that required a restart. After the restart, my computer stayed on the black screen with the loading bar that says microsoft corporation beneath it for longer than usual and went black. I waited for a while and it stayed black. I then rebooted in safe mode with networking and tried to search for a solution. I frantically made several assumptions, one of which was that Mcafee was the problem, so I uninstalled it. A couple of sites recommended Malwarebyte's anti malware. I scanned my computer, (it took about an hour and a half) and it came up with three problems. I clicked fix or something, I can't remember, and it quarantined them. I then restarted and experienced the exact same irritating black screen. I can only operate in safe mode. Any help would be much appreciated.

Note: I ran root repeal several times and it never made it through a full scan.

dds.txt

DDS (Ver_09-10-13.01) - NTFSx86 NE... Read more

A:Windows freezes/stays black before the welcome screen.

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

Read other 3 answers
RELEVANCY SCORE 64.8

Hello, the other day I started a game on my notebook and it turned off. When trying to start it up again the screen turned black with purple code across it and couldn't fully boot up. After leaving it alone for a day I went to turn it back on and it worked fine. A couple days later I went to turn it on and it started to boot up but the screen stayed black. I have tried the bios power reset, and the cap lock blinks white 5 times, two fast then a break, twice fast then a break then once more. It has been a few days and this problem is persisting. I have tried hooking it up to an external monitor and it tries to connect then days signal can't be found. Any help would be appreciated!!

Read other answers
RELEVANCY SCORE 64.8

Hello, I am working on a toshiba labtop

When I press the power button, the power light comes on, led indicator light comes on for power and battery charging comes on. The cd rom fires up, the cpu fan fires up. The screen stays black, The hard-drive led indicator stays off and the hard drive does not spin up. I have tried to reseat the memory and reseat the hard-drive. I have pulled the battery and held the power button without the the ac adapter hooked up for 60 secs, still nothing, hooked up to external monitor and still nothing. Any tips to try to figure this out?
 

A:Labtop not coming on screen stays black

First of all, its a LAPtop, not a LABtop, and secondly, I believe the problem could be the motherboard, although Im not sure because many things can cause something like this. Try some different memory in it, that would be the easiest option and if that doesnt work, it is most likely the video card. And the video card is very difficult to replace on laptops.
 

Read other 1 answers
RELEVANCY SCORE 64.8

Heres the story... customer got bad viruses.. did clean up and removal of the infections and I noticed the laptop wasn't shutting down. (I cant confirm that this wasn't an issue before. I didn't notice it but doesn't mean it wasn't there) when you go to shut down the screen goes off but power on light stays on and fan stays on. Have to hold power button to shut it off

HP Model Pavilion 2000-2b29WM

Heres what I have done so far...

1. I did the refresh (the full format one) but still did it. I still have windows 8 didn't bother updating to 8.1 yet since that's what I had before I refreshed it
2. updated/flashed BIOS but didn't work. Reset BIOS to default
3. Turned off "Turn on fast startup (recommended)"
4. put in different HDD and loaded Windows 7 and when I went to shutdown it locks up at shutdown so still problem shutting down but screen stays on.
5. tried different RAM
6.Tried different power adapter.
7. tried holding SHIFT while shutting down
8. Resisted punching the laptop.

I don't know what else. I was confident that the viruses did it but maybe its a coincidence and its some hardware issue?? Thanks

A:shutdown black screen power stays on

Set the BIOS to default settings.

Read other 13 answers
RELEVANCY SCORE 64.8

My computer was running fine and then suddenly the screen went black.  I turned the power off and on and it came up with error message "Unmountable Boot Volume" and then tried to fix the problem but it just stayed on the black screen and never fixed the problem.  I turned it off, done the hard reset where I take out the battery and hold the power button for fifteen seconds but it is still the same. I have gone into the mode where I can try to restore the computer but it does not allow me to do that. It say's it is restoring and then just stays black.   I have also ran a report where it says the problem is "Hard drive Short DST Check: Failed" and gave me a code of 0SNHWW-7N987K-MFPWMG-60WF03. If there is anything that can be done to help me I would really appreciate it as I use this laptop for work and really need to get it back up and running urgently with minimal cost.  Many thanks for your help

Read other answers