Over 1 million tech questions and answers.

Compatible SSD for Tecra A8-133

Q: Compatible SSD for Tecra A8-133

Hello,

I own a Tecra A8-133 (PTA83E-0E403MBT ).
To give a kick to my aging laptop I bought a corsair neutron GTX SSD. Unfortunately, after
many attempts, and some corsair support, it seems the SSD is not compatible with that TECRA.

I'm ready to buy a new one, but, obviously I want to be 100% sure the SSD is compatible this time.

How can I find a list of compatible devices for this laptop ?

As a SATA 1 laptop, I know the performance will be restrained, but I don't care too much.

Any help would be appreciated.


Thank you

RELEVANCY SCORE 200
Preferred Solution: Compatible SSD for Tecra A8-133

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Compatible SSD for Tecra A8-133

Hi

What?s wrong exactly?

I found some specification of the mentioned SSD drive from Corsair and it looks like the SSD drive is designed to support the latest high-speed standard SATA III (6Gb/s).
But it?s seems to be fully backward compatible with SATA II and SATA I. So it should be compatible?

From my knowledge there are no any special info regarding the SDD dive compatibility.
In some cases the SSD drive manufacturers provides an SSD drive firmware updates and sometimes such update helps to sort out some issues.

Read other 5 answers
RELEVANCY SCORE 56.4

I have a Tecra M10-1KR (GM45/GM47 chipset) and would like to upgrade it with a ADATA XM13 60GB (mSATA). There is one free PCIe mini slot unter the keyboard, but unfortunately i found no information if the mainboard will accept mSATA modules.


Regards, Harald Katzler.

A:Tecra M10 mSATA compatible?

I cannot say for sure if this mini PCI module would be compatible.
Fact is that the TECRA M10 is equipped with Intel GM45/GL40?Cantiga (G) MCH? as North Bridge, Intel ICH9M as South Bridge and R5C847 as Card Controller.

The both miniPCI card slots are used for 3G or Intel Turbo Memory and WLan
Some models supports Intel Turbo Memory.
Intel Turbo Memory (Robson) in PCI Express Mini Card slot 2 and also some models are equipped with PCI Express Mini Card type 3G card in PCI Express Mini Card slot 2.

Read other 2 answers
RELEVANCY SCORE 56.4

Dear Sir
Does Windows 8 upgrade alright eg drivers etc for this model please
Ian

A:Re: Is Tecra A10-1C5 Windows 8 compatible?

Pick up info about Win8 compatibility on http://eu.computers.toshiba-europe.com/innovation/generic/windows8-message
More info you can find under Toshiba Compatibility Matrix.

Check it out.

Read other 5 answers
RELEVANCY SCORE 56.4

HI,

did anyone know if the new Z50 is compatible with the Samsung 960 NVME Pro SSD? If not, which Toshiba Notebook is?

Ad the product sheets from Toshiba I can only see "SSD"

Thanks.

Read other answers
RELEVANCY SCORE 41.6

I possess a tecra A10 complete with Windows Vista Business installed (and backed up to an image file using Easeus Todo backup


However I also have access to a Tecra M10 which came with no operating system, although the COA sticker (product key) is likewise for a windows Vista Business.


My question is: would my Windows Vista Business back up from the A10 work on the M10 (ie would it load onto the M10 hard drive and then work properly

If anyone can advise on this matter I would be appreciative please

Best wishes
Ian

A:Can I use Tecra A10 OS disk to install OS on Tecra M10?

At first I must say that Toshiba recovery image is created for each notebook model separately and it is 100% created to work on specific model. Why?
Every notebook model has different hardware platform and all drivers, tools and utilities for certain model are part of recovery image. These recovery images are also tested.

Generally speaking if both models have identical hardware platform (hardware parts) it can be used.

Read other 4 answers
RELEVANCY SCORE 38.4

Dear forum
The above says it all really.

I see the two look similar, but one is smaller. Are these two models different in other ways please.
Ian

A:Difference between Tecra A10 and Tecra M10

Of course the both notebooks are different.
There are different Tecra A10 models and there are different Tecra M10 units.

For example:
Tecra *A10-13B* supports an Intel Core 2 Duo P8400 2,26 GHz CPU and Intel GM45 chipset.

Tecra *A10-1D2* supports an Intel Core 2 Duo T9600 2.80Ghz CPU and Intel GM45 chipset

You can find details about different discontinued notebook models here:
http://www.toshiba.eu/discontinued-products/
Then you can compare all the hardware parts.

Read other 7 answers
RELEVANCY SCORE 37.2

I have an old Compatibles by Compaq scanner/keyboard that worked with win98, but I can't seem to get it to work with XP.
It's connects thru one of my serial ports. Does anyone know how to or if it can work with XP?
 

A:[SOLVED] scanner/keyboard - compatible/not compatible with XP?

see if they put out drivers for xp
i had to replace my scanner because of no drivers for xp
 

Read other 2 answers
RELEVANCY SCORE 33.2

I've decided to try my hand at building my own PC. I intend it to be a medium - high end gaming computer. I've got everything figured out (at least I hope) I'm just wanting a second opinion about my choice of motherboard and CPU. I'm pretty sure they are compatible, at least in theory, I was just wondering if anyone had any first hand experience with them, or any advice for me. Hey, if you feel like it, recommend something bigger and better. I have a pretty good budget for this (within reason of course, nothing too outrageous).

CPU : AMD Phenom X4 9950 Quad Core Processor 2.60GHz, 4MB Cache, 2000MHz (4000 MT/s) FSB, Agena, Retail, Socket AM2+, with Fan (http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=4016668&CatId=3496)

Motherboard : FX nForce 750a SLI Motherboard - NVIDIA 750a SLI, Socket AM2/AM2+, ATX, Audio, Video, HDMI, DVI, PCI Express 2.0, Gigabit LAN. S/PDIF, USB 2.0, eSATA, RAID (http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=3930721&CatId=13)

One big question I have, however, is whether a GeForce 8800GT graphics card with its super long design would fit correctly or at all in that motherboard. The 2nd PCI-E slot has to be the first one used, so I couldn't put it in the top slot. I think it would fit, but not quite sure.

Anyways, thanks in advance to anyone who takes the time to have a read through this, and an extra thanks to anyone with any advice or comments.
 

A:Compatible, or not compatible, that is the question.

why can u not use the first slot? the only problem should be with the case. put the mem. in before u put the video card in.
 

Read other 2 answers
RELEVANCY SCORE 30.8

Hi,

I'm trying one of this popular caddy's that allows me to put a second hard drive in the optical slot bay, I use a Sata to Sata adapter, so there is not really an adapter besides connecting properly:

[http://www.akasa.co.uk/update.php?tpl=product/product.detail.tpl&no=181&type=Enclosures&type_sub =2.5%20Enclosure&model=AK-OA2SSA-BK]

My problem is with Toshiba BIOS that is expecting a ODD device in that Sata port and cames out with a "CD-ROM error", disabling the Sata port.

I have a workaround, if I start the PC, after BIOS post with anything in ODD bay, after starting Windows, I insert the second HDD in the ODD bay, go to "Windows Device Manager" do a "Check for hardware changes" and voil?, the second HDD is working fine, to me this proves a BIOS limitation.

Is there any help, a Beta BIOS or something else, I have the last BIOS 3.00 for this machine installed.

A:Tecra M10-17U use second HDD in the ODD bay

Please check this thread:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=39412

It seems that Tecra M10 does not support an select bay which would allow you to use an 2nd HDD instead of ODD.
As far as I know select bay is supported on Tecra M1, M2, M3, M4, M5, S1, S2

Read other 7 answers
RELEVANCY SCORE 30.8

hi, it is possible to have a functionnaly laptop upgrade with win10
TECRA S11-162 PTSE3E
or it is definitively dead ...

it is easy and no time eating for upgrade windows ?

thanks

Read other answers
RELEVANCY SCORE 30.8

Hello,

do you know, if it possible to install a SSD Driver for my notebook?
And if yes, which manufacturer/brand you would recommand?
I want to install Win7 Prof - Anything to take care of? Drivers, firmware, BIOS Version etc...?

Thanks for tips in advance.

kind regards

Peter

A:Can I use SSD for Tecra A8

Generally speaking it should not be a big problem to use an SSD instead of an common HDD.
The notebook supports the SATA interface and you have to use an 2.5? SATA SSD drive.
I cannot recommend any specific brand but in some very rare cases it could be possible that you will need to update the SSD firmware providing by an SSD manufacturer?

Read other 2 answers
RELEVANCY SCORE 30.4

This is my first post so apologies for any mistakes they are unintentional. Now does anyone know of a method that can use the right alt f4 key to be functional instead of shutting the computer down.

It is a requirement of a game.
Thank you

A:Tecra notebook - Right Alt F4 key

As far as I know ALT+F4 closes the applications but it cannot be used for notebook shutdown.
FN+F4 activate hibernation mode and notebook will be “shut down”.

Read other 1 answers
RELEVANCY SCORE 30.4

Hi, I've a Tecra that came with Win Pro 7 Sp1 that was upgraded with supplied Recovery DVDs to Win 8 Pro and subsequently online to 8.1 and Win 10.
Win 8 and 8.1 ran fine but with so many problems on Win 10, I eventually went for "scratch" install with the recovery Win 8 DVDs.

Zapped the entire HDD using the Recovery DVDs but finally get the following msg after Win 8 had been re-installed: "Windows Setup could not configure Windows to run on this computer"
Ran "MSoobe" , as recommended on other forums and while this advanced the process, Windows ultimately did not run.

Any ideas anyone?
Thanks - davidtjm

Read other answers
RELEVANCY SCORE 30.4

My TECRA A7 has a 100GB HD and I wonder if I can replace it for a larger one.
Is it possible and what should I do?

Thanks for any help

A:HDD upgrade on Tecra A7

Hello

Your Tecra has SATA HDD connector so it should not be problematic to use HDD with higher capacity.
I don?t know which one you want to use but HDD between 200 and 300 GB should be good enough for upgrade.

What do you think about that?

Read other 1 answers
RELEVANCY SCORE 30.4

I need to (re)format my laptop, I have a Tecra M11-103 with Windows 7 pro 64bit. I received it with only an WXP downgrade CD but no Windows 7 installation CD.

Laptop no longer under warranty. How do I reformat? It seems like I used to have a nero backup software as it came bundled with laptop a long time (and a format under warranty) ago...

Is it possible to get nero again?
Thanks
E

A:How to reinstall my Tecra M11-103?

Hi

According notebook specification your Tecra was delivered with preinstalled WIN7 64BIT PROFESSIONAL and you got additional WXP DVD. Original Win7 recovery image was saved on HDD and using preinstalled Toshiba recovery media creator you have had possibility to back-up recovery image and create bootable recovery installation disc.
How it works is described in user?s manuals document.

I don?t know if you have created this disc but now after WXP installation you need this recovery disc. Of course, if you want to have ?factory settings?, you need this disc. Other way, you can obtain Microsoft installation disc and install Win7. All necessary drivers, tools and utilities you can find and download from Toshiba download page.

I hope you understand the situation but if you have more questions you are welcome.

Read other 1 answers
RELEVANCY SCORE 30.4

Thinking of replacing the exiting ram with
G.Skill Ripjaws SO-DIMM F3-1600C11D-8GRSL 1.35V (Low Voltage) 8GB Kit (4Gx2) DDR3 1600


Not sure it is compatible. I doubt it is compatible to 8gb ram.
Please advice.

A:Tecra M11 - RAM compability

Can you please post notebook full model name (M11-xxx)?
Just to check which chipset is inside and RAM compatibility as well.

Read other 5 answers
RELEVANCY SCORE 30.4

Got a Tecra M1 refusing to power up since few days.

The M1 has 3 led to indicate: (a) the AC power is connected (b) the power is on (c) the battery is available / charging.
Each of these can be green or amber.


The symptoms are the following:
- with AC adapter and batteries plugged, (a) and (c) are green
- when powering the laptop, the leb (b) is turing green for a fraction of a second; then start blinking amber with more or less 1 second frequency. Got a intermediate beep on speaker with the same frequency.
- display is bank. Not even bios is displayed.

I tried already the following:
1) remove AC and battery, wait a while, plug both and restart. Same issue
2) remove battery, boot on AC. Same issue.
3) remove AC, boot on battery. Same issue.

Any idea ?
Does anyone know the meaning of having this "power-o" led blinking amber.
Thanks.

A:Tecra M1 does not power up

Hi buddy,

> remove AC and battery, wait a while, plug both and restart. Same issue
Good job because this was described [HERE|http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

Unfortunatley that?s everything what you can do if your notebook doesn?t start. At the moment it looks like a serious hardware malfunction and the mainboard or CPU could be affected.

I would recommend contacting an authorized service provider in your country. The guys can make an exact diagnostic and tell you how much a repair would cost.

Good luck! :)

Read other 2 answers
RELEVANCY SCORE 30.4

Hi. I've got a failing hard disk in my Tecra, the existing disk is a Fujitsu MHZ2120BH G1. In an ideal world I would swap this disk for a solid state but I'm wary having read of others' problems installing SSDs. Has anyone any experience of successfully (or otherwise!) of doing this. Alternatively, I'm quite content to stick with a HDD but I wonder whether I can increase the size of the disk from the existing 120Gb? I've got some vague memory of having read about a limit on the size this laptop will take. Thanks.

Read other answers
RELEVANCY SCORE 30.4

My laptop will not boot up.
When I plug in the PSU the green LED at the front of palm rest (far left LED) flashes slowly on and off.
No other LED lights are on at all. Pressing the power on button produces no effect.

Please can anyone advise what the problem might be with this laptop.

"Perhaps someone knows if that particular "sequence" of flashing is listed as meaning any particular problem lease.

Your kind help in this matter would be appreciated .

Thank you
Ian

A:Tecra A10 won't boot up

Hi
There must be definitely a hardware malfunction.

>"Perhaps someone knows if that particular "sequence" of flashing is listed as meaning any particular problem lease.

Knowing that you can read the blinking code using the following procedure:

The short blinking means 0 and long means 1.
The code might be something like 0001 0001

Error code starts with LSB (least significant bit) therefore the error code has to be read starting with last bit. This means that the code: 0001 0001 would appear as 1000 1000
This code you have to transform in HEX and you will get the error code.

But in my opinion even if you would know what cause this problem, mostly it?s some motherboard malfunction (maybe also a part connected to motherboard like RAM module) and this means that the whole part needs to be replaced.

Read other 1 answers
RELEVANCY SCORE 30.4

Hi,

i bought the Z40 with a 500 GB HDD. As a replacement i bought the following SSD:

Crucial CT512MX100SSD1 - 500 GB

Unfortunately i didn't get it to work. On the BIOS i can see that the system recognizes the ssd. But neither the restored system boots, nor windows 8.1 Retail installs. Are there any known compatibility issues?

The problems persist whether the bios setting is UEFI oder CSM.

I upgraded to the latest bios version to 3.7, but that didn't change the result.

A:Tecra Z40 - HDD Upgrade

If the BIOS recognize the new SSD drive, then the drive should be visible also for the system.
May I ask you how did you try to install the Windows 8.1 OS?
What installation media did you use?

The Tecra Z40 does not support internal ODD (optical disk drive). Therefore I?m wondering about the installation procedure

Read other 12 answers
RELEVANCY SCORE 30.4

Hello

I bought a 1000MB HDD and build in in a TECRA S10-106.
The HDD was not identify.

Have you a answer why?

Thank you for help

A:Tecra S10-106 does not see HDD 1000GB

Sorry, _1000 GB_

Read other 3 answers
RELEVANCY SCORE 30.4

Hi,

my TECRA A10-1HG PTSB1E does'nt recognize my second HDD who has taken the place of the cd-rom.
i'm using a SATA caddy, and the A10 boot with a CD-rom Error !!!
is it not possible to use a caddy with one TECRA A10?
Anybody have a solution ?

Thanks for your experience return.
Best regards

A:Tecra A10 does'nt recognize 2nd HDD in ODD bay

Hi

I assume the Tecra A10 does not support such upgrade.
The 2nd SATA controller does not seem to support the additional HDD instead of ODD.

But I read about some tricks to get such2nd HDD recognized.
You need to boot the notebook without the HDD caddy in the ODD bay.
After the Windows system has booted up, you could plug/connect the HDD caddy and the PnP system service should recognize the new device.

I think its not the best solution but it looks like it?s the only solution to get such HDD caddy recognized in ODD bay

Read other 4 answers
RELEVANCY SCORE 30.4

Hi,

my Fan is running continously and Health Monitor reports Fan Problem. How do I get to the Fan? Where do I get a Service Manual?
I followed the instruction to blow air from outside- as expected this didn?t work
PS: ( if the only answer is that there is no Service Manual and to contact a Service Partner that will be my last Toshiba- from a pro model and its Prices I expect a little bit more)

thx for your answer

Oliver

A:Cleaning of Fan for Tecra A50

Service manaual is not a public document and not free for the download.
I’m sorry if this will be your last Toshiba but don't be sure that another manufacturer will give you service manuals. No one will give you such document.

Notebooks have specific design and it is pretty easy to damage something. That’s the reason why the disassembling procedure should be done by authorized personal only. When you buy TV, auto or anything else nobody will give you service manuals.

Of course you can do with your notebook whatever you will but on your own risk.

Have you tried to remove the dust using compressed air.

Read other 1 answers
RELEVANCY SCORE 30.4

has any one had any issues with the cpu temp?
ive reapplied thermal paste and cleaned the fan but its getting rather hot max under load is 87c not enough to shut down but should it be reaching this temp?

Read other answers
RELEVANCY SCORE 30.4

I would like to improve RAM to 8Gb. Specs say is possible. Is it really? Which module is recommended?

Read other answers
RELEVANCY SCORE 30.4

Hi,

how can I boot from CD/DVD is the OS is not working an I can't access the Toshiba Hardware Setup tool in Windows?
If I press F1 I can only change Date and Time but no boot order.
Is there a special key to boot from CD/DVD?

Thanks
Baumi

Read other answers
RELEVANCY SCORE 30.4

Hi guys,

i have an old TECRA M10-139 with a Core 2 DUO T9400 @ 2.53GHz and i want to upgrade the CPU to a Core 2 DUO extreme QX9300.
I think the sockets are the same but i am not sure if the BIOS and the other specific hardware of the notebook can handle this processor.

Thanks in advance

Read other answers
RELEVANCY SCORE 30.4

I just bought a Tecra A50-a-1DJ .
The 256GB disk (SSD) looks like formatted :
1,46gb : recovery partition ;
217,47gb : disk C :;
8gb : partition for hibernation ;
11,54gb : primary partition .
I would like divide the C: drive space so that it becomes:
C: 100,47gb
D: 100gb
F: 17gb
I tried it with the built-in Windows (disk management) that with Paragon Partition Magic :
The answer is always that I can't create more than 4 partitions .
As a workaround?

A:Tecra A50-A-1DJ - SSD partition

MiniTool partition wizard may work

Read other 1 answers
RELEVANCY SCORE 30.4

I wonder whether anyone might be able to answer a question for me.

I have a nice Tecra R10-11B and it has been very good for quite a few years. It runs Win XP and does everything asked of it without a problem.

What I would like to find out, though, is whether it is possible to fit a quicker CPU. I have a suspicion that the installed cpu may be permanently fixed and is not replaceable but I would like to find out.

I had played with the idea of replacing the Intel P9400 Core Duo with something a bit new, to allow perhaps installing Win 7 and more memory. There is 3gb of ram installed.

Any suggestions would be appreciated.

parkman

A:CPU upgrade on Tecra R10

The CPU is socked and this means that the CPU is removable.
But the important fact is that notebook manufacturers don?t support CPU upgrade.
One of the main reasons is the BIOS which is mostly modified by notebook manufacturers.

But let?s start with some basic knowledge:
The CPU has to be supported by chipset and BIOS.

So let?s check what CPU would be supported by Mobile Intel GS45 Express Chipset which is part of the Tecra R10-11B
Here on this Intel Ark page you can find compatible CPUs
http://ark.intel.com/products/35505/Intel-82GS45-Graphics-and-Memory-Controller-Hub#@compatibility

But even if the chipset would support new CPU, some compatibility problems may appear because of the BIOS.
However, the Intel Core 2 Duo CPUs ( Montevina Penryn) were equipped in different R10 models, so probably other Intel Core 2 Duo CPUs would be supported.

By the way: the RAM could be upgraded up to 4GB RAM

Read other 2 answers
RELEVANCY SCORE 30.4

After reading a recent article in PCPRO it mentioned about changing the wireless card in you laptop to a quicker one, has anybody done this and if so I would like to know the following things:

1) how and what does it require
2) How much was the replacement and what model
3) what is the situation with warranty and firmware.

Regards
TM8

A:Wi-Fi upgrade on Tecra M10

I have a few questions for you:

Which M10 do you have exactly (M10-xxx)?
Is maybe Intel WiFi Link 5100AGN WLAN card inside?
If yes, which standard you want to use to get it faster than standard N?

Read other 4 answers
RELEVANCY SCORE 30.4

I have Toshiba Tecra M7-132

I would like to improve everything possible

I want to increase the amount of RAM in my laptop but I do not know does my laptop can handle the memory faster than DDR2 533. I have Windows XP Tablet 32bit, I know it will handle only about 3.5 GB of RAM but it's better than 3 GB

I also want to change the hard drive. My current drive is HTS541080G9SA00 Hitachi, 80 GB, 5400 rpm SATA . Will it run with a bigger hard drive with speed 7200 rpm?

I installed all the most recent official drivers and BIOS

What else I can improve

A:How I can improve my Tecra M7?

Hello

According the specifications of Tecra M7-132 on Toshiba page it supports up to 4GB RAM but all 32bit OS support only up to 3.2GB RAM and for Windows XP 2GB is more than enough because it doesn?t need much RAM capacity.
The specification for RAM is DDR2-667.

Regarding the HDD: Larger HDDs are no problem because there is no capacity limit on SATA interface. That means you can also install 500GB HDD or larger. Only important is that you buy a 2.5? HDD with SATA interface.
Also 7200rpm shouldn?t be a problem but they creating more heat and need more battery power. Usually 5400rpm are enough and quieter.

Read other 7 answers
RELEVANCY SCORE 30.4

Tecra M11-17V. I can get a second monitor running, but that monitor shows the same image as the laptop's monitor. I want to have two different documents on view at once: one on the laptop and another on the second monitor.

Is this possible or not possible?

A:Second monitor with Tecra M11-17V

Of course you can do this. All you must do is to use “extended desktop” option.
Test it please.

Read other 1 answers
RELEVANCY SCORE 30.4

Hello,

i have a problem with my TECRA. The magnesium back cover of this model of laptop is very soft and breakable.
After a few months it's now full of scratches. My question is the following: does exist a way to obtain a new screen back cover of this model of notebook? How can i obtain this kind of spare part?

Thank you in advance.

A:Tecra Z50-A-10D scratched

I’m quite sure that you will be able to order such part from local official Toshiba authorized service provider…

I recommend you to get in contact with ASP and to ask for such part:
http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

Read other 1 answers
RELEVANCY SCORE 30.4

Hi,

my Tecra A11 with Win 7 Pro 64 and a Mat****a DVD-RAM UJ890AS is not able to burn on a CD-R. CD-RW and DVD is no problem but when trying to burn a CD-R I got following Error Code: 060277-26-2A031000

I tried the solution in
http://forums.toshiba.com/t5/Computer-Troubleshooting/Error-code-380381-26-2a031000/td-p/172666
- without success. There are no upper/lower filter keys in my registry.

I tried CD-Rs from 3 different brands, I tried CDBurnerXP and the Toshiba Disc Creator - always the same error. There is written the track list (copying a music CD) and then the error appears. The CD-R is not usable any more after this.

What can I do? Is it possible to flash the firmware of the DVD-Drive - if yes, where can I get the fw?
Thanks in advance!

A:Tecra A11 - Cannot burn CD-R

Hi

What brands did you try?
I use TDK ?R and they functions properly.

Additionally I recommend cleaning the laser lens using cotton wool tip and alcohol.
Had also problems reading and burning some disks which have been solved after cleaning the lens.

Read other 2 answers
RELEVANCY SCORE 30.4

Hi,

I'm looking for how to set the asset tag information int the smbios of a toshiba tecra M11 laptop ?
I have found this post LINK:[http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=40167] but the tool assettag.Exe don't keep the tag after reboot.
Any idea please ?

A:Tecra M11 and asset Tag

I don?t know if you have European notebook model but here in Europe this tool is not available for customers and this stuff must be done by authorized service provider.

If you want you can try to contact nearest Toshiba service provider and ask for help.

As you can see in other thread last user has posted link to Toshiba US support page.

Read other 5 answers
RELEVANCY SCORE 30.4

I have a Tecra A9 12T article-nr.: PTS52E-01T02NGR

Because i have a SSD installed i'd like to remove the dvd rom and install a second harddrive.
i bought a harddrive bay with the right conectors, but allways when i start my computer he tells me:
"CD ROM error" and i can't find the option in the bios where i can change form CD-ROM to HDD.
Can someone help me? thank you!

A:Re: Second Harddrive in Tecra A9

Is this HDD bay designed for Tecra A9?
I mean it is original Toshiba part compatible with this notebook model?

Read other 2 answers
RELEVANCY SCORE 30.4

HI, was wondering if anyone has had a similar problem: on boot up the screen flashes red instead of black, with vertical lines (white thin ones) across the screen. When it finally boots with windows xp, there are horizontal lines across the screen with different shades of the colour. The cursor has a box of lines around it. I think it's a VGA card issue but am not sure; has anyone had similar problems? I have visited irisvista on the web, where there are some instructions on disassembly. I got to the connector to the LCD and repositioned it, and noticed that when I appllied pressure in this area I could get near normal display.... can anyone shed some light???
 

A:Tecra S1 LCD with lines across it

It sounds like there might be something wrong with the cable or cable connector. Can you try another cable?
 

Read other 1 answers
RELEVANCY SCORE 30.4

Have read many posts and tried what was suggested. I pulled the 2 memory modules and cleaned the contacts with an eraser. I inserted only one of the modules at a time, switching slots etc. and then powered it up each time. Once with only 1 module installed, I got the WINDOWS XP startup screen (with the moving bar below) and then the Toshiba Splash screen appeared and then the screen went blank again. Seems like the hard drive starts up and then stops. The DVD drive seems to respond with a low clicking sound. I hear a couple chirps/clicks from the hardware but no beeps whatsoever.

I'm guessing bad RAM. I will try with some new RAM later when I get some.

Since I did get the machine to sort of startup once, am I safe to assume the BIOS and Motherboard are okay ?

Thanks in advance for any suggestions.
 

A:Toshiba Tecra S1

I would say failing hard drive
 

Read other 4 answers
RELEVANCY SCORE 30.4

We bought a Crucial M550 256GB disk and want to replace in a Toshiba Tecra Z50-Av1

We do not want to make any transfer of data or cloned.
We want to do a clean install with Windows 8.1
The BIOS recognizes the SSD

But when you install Windows 8.1 does not detect any disk connected to the unit and requested additional drivers. Windows not detect drive

https://www.dropbox.com/s/mlvk6v3lxzi1rrh/2014-05-04%2009.47.18.jpg
https://www.dropbox.com/s/fr2eo5l9xonaoln/2014-05-04%2009.48.59.jpg
https://www.dropbox.com/s/8usxog8wm06funr/2014-05-04%2010.06.09.jpg

i too test with lasted version of this driver (old F6 in boot to locate hdd driver)

https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23496&lang=eng&wapk w=f6flpy-x64.zip

and with toshiba package
http://support.toshiba.com/support/viewContentDetail?contentId=4004211
you can see than i have 3.20 version of BIOS. interestingly I see that the last one is the Toshiba has released version 3.1

But always the drive CRUCIAL is not reconized by the boot instalation of windows

The problem is similar with ubunto, kubuntu, .... the drive is detected with the BIOS but not for the OS.

any help?
Thanks

A:Tecra Z50-A-11V: New SSD but Win 8.1 does not detect it

Hi

Did you solve this issue?
Could you install the Windows 8.1 system on this SSD drive?

I think the additional driver installation while setup procedure isn?t necessary since Win 8.1 should already contain the essential drivers.
From my point of few there could be an compatibility issue (maybe SSD firmware update would solve this).

How about the usage of other SSD drives? Do you have the same problem using other SSD drives from other manufactures?

Feedback would be appreciated.

Read other 1 answers
RELEVANCY SCORE 30.4

The first three lights come on,when I try to start it . Nothing else happens no noise or anything. I have tried taking battery out,starting with external power only still the same.

Does it sound expensive to fix.

A:Tecra A2 is not powering up

Can you please post a bit more about this machine?
Have you bought it as used one and now you try to fix it?

Have you maybe tried to update BIOS and now you have this problem?

On this virtual way it is not easy to offer exact diagnostic but it doesn?t sound good to me. Maybe is BIOS screwed-up. Repair can be pretty expencive.

Read other 1 answers
RELEVANCY SCORE 30.4

Hi All,

I have a Tecra P4 - PTS40A-02100V which will not recognise the new Hitachi 80GB disk (HTS541080G9SA00). The laptop is out of warranty and replacement disk was purchased. This is the second new disk the supplier has sent me. The supplier is an official Toshiba supplier in Australia. Customer has paid ~$400AUD for the disk, so this could be an expensive exercise.

I am able to get a vanilla Toshiba Restore to work on the PC, however our organisation uses a WinPE based PXE boot environment to kick off image and build of Windows XP. Using a generic Windows XP in our environment is not possible.

Diskpart in WinPE will not recognise the disk. Partition Magic and other popular apps will recognise the disk, others won't. I can create an NTFS partition and format. Can create basic MBR and MFT, no luck recognising. Also I can use the disk in a USB caddy in Windows XP on another PC fine.

This new disk will display the same issues in another known working P4. I see no options in BIOS to get around the issue. I have updated the BIOS to v3.20, however the result is the same.

Any clues?

A:Tecra P4 not recognizing new HDD

Hi buddy,

Just for testing: Is it possible to install Windows from Toshiba recovery disk? Have you tested this?

And interesting to know would be what the authorized service provider says about this behavior. Did you ask the guys already?

Read other 6 answers
RELEVANCY SCORE 30.4

Hello,

unfortunately the letter S got loose from the keyboard of my laptop. The plastic retainers came off with it and are still attached to the key pad. After some research on the internet and closer inspection i saw that the metal hooks for the plastic retainer seem twisted and therefore i was unable to reattach the key pad.
Any advice how to fix the problem? My fear is that i would have to exchange the whole keyboard?

Greetings,

Michael.

Read other answers
RELEVANCY SCORE 30.4

Hi all!!!

I'm Tecra A10-11K user and can I upgrade SSD on Tecra A10-11K?

A:Tecra A10-11K - Can I upgrade to SSD

Yes you can :)
You will need to use an SATA SSD drive

Read other 3 answers
RELEVANCY SCORE 30.4

I want to use this old laptop which originally had win98. I managed to put win xp on it, but it is unworkable slow. Today I tried Lubuntu (a linux distributioon specific for oldies) but that too is too slow.

I just want a simple OS to browse.

A:Which new OS can I use with old Tecra 8100?

I don?t know which ?new? OS do you mean but fact is that you have old piece of hardware and if you want to have well working machine you should install supported operating systems ony.

Drivers for them you can find on Toshiba support page - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp in archive

Read other 7 answers
RELEVANCY SCORE 30.4

Hi,

I have recently bought a Tecra M7 off a friend who had neglected it. It has been lying around for over a year with a broken power port. As a result of this he has lost all the discs and the pen!

I have upgraded the ram and have a 120 gig HDD that I would like to put in it but as I do not have any of the discs this is going to cause me a problem.
I have downloaded all the drivers I need from the toshiba website but am in need of the OS.

Is there any way for me to get the XP tablet edition 2005 which is already on it without having to pay a rediculous amount for a brand new copy?
Is it possible to transfer winows from 1 HDD to another? Also does anyone no where I can get 1 of the pens from?
I have looked about on the internet and can't seem to find any!

Any help would be greatly appreciated!

Jay

A:Tecra M7: Where to get Win XP Edit?

Hi mate

I?m not quite sure if you will be able to order such disk for this notebook.
In some cases this is not possible if the notebook series has been discontinued.
But check this page:
http://backupmedia.toshiba.eu/landing.aspx

Usually you could order the recovery disks there.
But if it?s not possible, then you will need to install the Windows using an Microsoft disk!
The necessary drivers could be found on the Toshiba European driver page:
http://eu.computers.toshiba-europe.com/

Note: you have to choose Archive in the driver download form in order to find the Tecra M7 series.

>Also does anyone no where I can get 1 of the pens from?
I think all parts could be ordered from local Toshiba ASP

Greets

Read other 1 answers
RELEVANCY SCORE 30.4

Hi,

I would like do a multiboot XP / 98 on a TECRA A11.
Do you think it's possible.
Will I have some drivers dysfonction?

Thanks for answer !!

A:Tecra A11 - Win XP and Win 98 multiboot

Well, Win XP installation should not be a big problem because the Win XP drivers seem to be available on Toshiba European driver page.

But Win 98 might be a problem here since its not supported and the drivers are not available? you will need to search for such drivers at your hand and I think this might be a painful time? I doubt you will be able to get Win 98 drivers because this OS is really, really old.

I would recommend installing the Win 98 only using Virtual Machine (VM) http://en.wikipedia.org/wiki/Virtual_machine
or Virtual PC
http://en.wikipedia.org/wiki/Windows_Virtual_PC

This is very easy? running Win XP you can open virtual PC or VM and could start the Win 98

Read other 1 answers