Over 1 million tech questions and answers.

X201 Tablet Windows 10 Tablet buttons not working

Q: X201 Tablet Windows 10 Tablet buttons not working

I have upgraded my X201 Tablet to Windows 10 32bit. As far as I can tell, everything is working, including the WACOM drivers and touchscreen. Wireless has worked perfectly so far, not sure about Bluetooth as I don't use it. My only issue is that the buttons on the display do not work. The power button located on the display does work. I tried installing the Tablet Button Driver II and it will go through the install but the buttons do not work. This is the download link:http://support.lenovo.com/us/en/downloads/ds027627 The document claims Windows 10 compatability and was Last Updated :08 Jun 2015. On inspection, all the files extracted are dated from 2012 and when trying to manually run the software Windows throws up an error that the software is not supported on this PC. I removed and reinstalled and noted that the driver information page when running the installer does NOT have Windows 10 listed as a supported system. My assumption is that the driver that they have linked on the download page is NOT the most current driver and is infact the driver for Windows 7 from 2012. Does anyone know how to contact Lenovo to get the correct driver posted to the page, or know of an alternate source to try and find it?

Preferred Solution: X201 Tablet Windows 10 Tablet buttons not working

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: X201 Tablet Windows 10 Tablet buttons not working

hi, I can't help you with your question, sorry! Gooed to hear everything else is working fine on your system. Can you tell me what to do to get the x201 tablet's touchscreen to work!? I will have a clean windows 10 install. Where do i get the (right) drivers (windows, Wacom?) Thanx!Carlo

Read other 1 answers

Some time in the last month, the tablet function of my X201 Tablet PC conked out.  I'm running Windows 7 (32 bit).  Perhaps there was something wrong with some driver update that was installed either through Windows Update or through the Lenovo Thinkvantage stuff.  I never managed to figure out what was wrong.  I tried installing various updates and drivers from both those sources, and from Wacom, without success.  I couldn't find any thread on the internet that discussed exactly this problem or suggested a solution.  It was a frustrating week! I seem to have solved the problem, though.  Through Control Panel -> Uninstall programs I found and uninstalled everything from Wacom, and all of the "Ultranav" driver stuff from Lenovo.  Altogether there were 6 or so things that I uninstalled.  Then I reinstalled Wacom's tablet driver (ISD Tablet, version 7.1.0-8), and then pen's back, and, indeed, working better than it ever has (the alignment calibration has been terrible since I bought the machine).  I haven't reinstalled the Ultranav drivers, and will probably refrain from doing so. I hope this helps the next frustrated Lenovo tablet user. 

Go to Solution.

A:X201 Tablet pen: Stopped working, but here's how I...

Hey there dmsk,
Thank you for sharing this information with the community, it is greatly appreciated, and I'm sure it may help someone who is experiencing similar issues.
Thank you for being a part of the Lenovo Community!

Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

Read other 3 answers

Hi I have installed 64bit windows 7 on my machine quite recently in order to utilise the extra ram. When i rotate the screen clockwise to tablet mode, the screen will auto rotate to primary potrait by default and the buttons will work as usual. However, when i swivel my screen anti clockwise to tablet mode, the screen will NEVER auto orientate to primary potrait mode and all the tablet buttons will not work if i rotate the screen ANTI CLOCKWISE. Can anyone help me on this? Thanks alot in advance for the replies

A:X200 Tablet rotation and tablet buttons problem

I found another thread in another forum whereby another x200t user has the same problem. http://forum.tabletpcreview.com/showthread.php?t=22541 Hope someone can give advice regarding this. Thank you

Read other 3 answers

I downloaded the 'driver' on the gateway website:

after downloading & Extracting the file. a 'read-me' file pops up.

it reads:


This document describes the steps necessary to install the Tablet PC button drivers for the notebook computer models listed in the Applicable Part Numbers section below.

1. From the Start menu, right-click Computer, and then click Manage.

2. In the User Account Control dialog box, click Continue.

3. In the left pane, click Device Manager.

4. In Device Manager, click the plus sign (+) next to Human Interface Devices.

5. Click Tablet PC Buttons, and then from the Action menu, click Update Driver Software.

6. The Hardware Update Wizard displays. Click Browse my computer for driver software.

7. In the Update Driver Software dialog box, type or browse to the C:\Cabs\D20113-002-001 folder. Click Next.

8. Open the D20113-002-001 folder and confirm the selection of the qttabbtn.inf file. Click Open.

9. Follow all onscreen instructions to complete the installation.

I get stuck at step number 5.. I do not have a 'Tablet PC buttons'!! (this is the reason why I need to download it..).. it seems to me this 'driver download' is actually an update for the driver. and not the driver its self.?

I downloaded other drivers from them, for my computer and they all worked great.. they all had easy 'install... Read more

A:Gateway Tablet PC, I need the 'Tablet Buttons driver'


After opening the qttabbtn.inf file (installation script), I found these alternative names for "Tablet PC Buttons." Try finding one of these names in the Device Manager:
"Quanta Computer Inc."

"Quanta Computer Tablet PC Buttons HID Driver"

Read other 10 answers

Is it difficult to replace the screen latch on an X201 tablet?  I've worked on T series laptops replacing lcds and drives and the like.  Thanks for any info!

Go to Solution.

A:X201 replacement latch on X201 tablet?

Welcome to the forum!
Well, it's not that difficult but you need to disassemble a lot of parts. This is fairly easy to do if you closely follow the instructions of Lenovo's Hardware Maintenance Manual, which you can download from here: click me!
Check chapter 8 -2040

Read other 3 answers

Hi,I did a BIOS Update and now my power and volume buttons stopped working. I can't find the drivers or anything. What should I do? Thanks!

Read other answers

hi, i was recently cleaning my tablet's keyboard and screen with a dry cleaning cloth. but after i turned my tablet back on, none of the buttons located on the base were responding. my speaker volume shortcut buttons and keyboard wont respond.

my mouse and left, right click buttons work fine though, and i notice the lights on my caps, num lock flick on on boot up. my volume buttons also have their lights on.

i heard a loud beep noise on my tablet during my cleaning too.

did i accidentally disable the bottom half of my tablet?

my screen buttons and external mouse work fine too.

im typing all this using my on-screen keyboard.

please, can someone help me.


Read other answers

I have installed win7 64 bit ("fresh install" on my M750-129) and i have also downloaded and installed all the newest drivers from toshiba website.
the device manager shows no problem / drivers needed, and trhings like HDD protection work well.

However, i have four groups of problems i would love and appreciate to find answer:

1) when i change the screen position to tablet, it does not change the orientation nor the resolution.
There is no utility to set the desired orientations of screen as it was in vista (horribly unstable and slow OS, though).
This, naturally, is diminishing the usefullness of the tablet finction

2) the buttons do not work properly; the screen rotation button starts excel (!!) , the centre of mobility button starts word (!!), and the toshiba assistance button does not work at all

3) fingerprints: the fingerprint utility lets me to screen my fingerprint, asks if it should save it, and than says "saving impossible; another duplicate pattern exists" which i completely do not understand what it means...

4) some applications are not available at all after fresh install: face recognition, DVD player, bussines card screener - but i can love without those; 1-3 worries me much much more and i would appreciate any functional help. thanx on advance for any try!

A:Portege M750 tablet, buttons and fingerprint functions not working in win7


I think you would need an extension package in order to use the tablet functions on the Portege series.
I didn?t find the Tablet PC Extension Package for Win 7 but there is an package for Win Vista.

Usually many tools and drivers which were released for Vista would work with Win 7.
So in my opinion you should try to install additionally this Tablet PC Extension Package.
I think this should solve the issue with the buttons too!

Regarding the fingerprint;
I think the message means that an fingerprint was already registered and therefore an second save is not possible.
Check if you can delete other fingerprints?

Read other 2 answers

Hi, Is it possible to install an SSD flash drive on X201 tablet? If yes, which type? SATA3, PCIe etc... and where to buy? Thanks in advance.

Read other answers

I have a sound problem on my X201 Tablet: The speakers work fine, i tested them on another X201t ...but sound is not working at all (also headphones not working). Not in Windows environment, not in BIOS/Boot environment - so i assume not a drivers, but hardware problem. Anyone an idea what might cause the problem?  

Read other answers

Hello everyone, After a routine maintenance run on my X201 Tablet where I cleaned the insides and reapplied thermal paste (I wondered why one core is 12C warmer than the other) my laptop will not boot, start or even acknowledge that an adapter has been plugged into it. When I finished with my cleaning, I went to start it up to see if the new thermal paste worked. The computer booted up right after I plugged the adapter in, but as I forgot to plug in the HDD, some self-diagnostic text started appearing on the screen. Quickly realizing my error, I didn't read what it said (none of it looked like error messages) and unplugged the laptop. After reassembly, it wouldn't react to anything (no LED indicators of anything), only static electricity keeps building up and kicks me. The only hardware that could have been damaged was the motherboard (cpu?) - this I know, because I had the old motherboard from X200 laying around and after I swapped it out, everything is working as it should. Question 1) Can anyone tell me, what process did I interrupt?Question 1a) Is there a way of restarting it?Question 2) As I did not hear/see any unusual flashes of light, or smells, or charred chips, I still think the hardware should be fine. Am I correct? Is this "just" a case of a bricked laptop?Question 3) How can I get my motherboard up and running again? Thank you for any pointers in my sad, dumb situation. 

Read other answers

I have a sound problem on my X201 Tablet.The speakers work fine, i tested them...but sound is not working at all.I tried multiple drivers from Lenovo.Might be a hardware problem, but not the speakers itself. Anyone an idea what might cause the problem?

Read other answers

Hi I recently bought a Lenovo X201 Series Laptop but the screen is cracked it has a touchscreen interface I would like to know can I replace the touchscreen with a 12.1inch LED or LCD Screen as I dont want to spend to much on a touch screen details of laptop is below Product ID: 2985DMG Specs: Corei7 CPU,500GB Hard Drive 4GB Ram 12.1inch Touch screen.

A:Lenovo X201 Series Tablet/Laptop

Hi,there is a lot matrices are installed into x201t. Models also depend of the backlight type - LED or CCFL. I'm not sure whether any supported matrices models are compatible with your laptop. Also there are different LCD cable assembly and LCD rear cover assembly depending of the backlight type.To ensure what matrice you have and what's compatible check out on Lenovo' site parts list of your laptop by its [laptop] serial number. Support site doesn't answer a question by MTM only.I think it's impossible to fit non touch matrice into the tablet because of the different size (width). Compare the width of x201 and x201t.
Service parts DB says your laptop has 12.1-in. WXGA LCD panel, LED backlight (300-nit LCD), FRU 45N6092 or 45N5388.

Read other 2 answers

yesterday i installed windows 10 (from 7). Pen worked fine, but not anymore How to solve this??? . I read about drivers (wacom, lenovo) but have no idea how to solve this problem  (& how and where to install  these drivers....), any advise?

Go to Solution.

A:x201 tablet pen doen't work after installation of ...

removed wacom driver and synaptics driver. restarted and pen works!.

Read other 1 answers

Hi. This is my first post. I have a Lenovo x201 tablet with i7 processor. Intel site says the CPU is in Production. However, there is no mention of this model on the Lenovo Thinkpad or tablet Side Channel list for Meltdown or Spectre patches. Does anyone know if Lenovo is planning to issue a Patch ? So far it seems that only the x220 series are shown to have patches.

Read other answers

When only the cable was working I checked for both adaptor driver's updates - 'they are already up to date'. Then the WiFi also stopped working. My adaptors are 'working'. I've been round their Properties Tabs and all is OK. MS diagnostics only say that there probably is a issue with the drivers. 3 other computers plus 3 tablets use the shared router's WiFi without any problems and only 2 are ever used at a time so it's not overloaded. The router is OK. I started the Lenovo Hardware scan but it just went on loading and never started for 12 minutes - a clue here? At least I can still use it offline. Luckily I have a PC to investigate, but as yet no luck even from another forum. Any help please  

A:WiFi and Ethernet on X201 Tablet now cannot connec...

I firgot to mention- I got this message - 'Windows couldn't automatically bind the ip protocol stack to the network adaptor' Of course I have googled this message but solutions there haven't been of help.

Read other 1 answers

Just got this, and did a clean install of Windows 10 Pro. Installed all drivers, nothing funky in Device Manager, but the touchscreen and the pen are not working. Click on Pen Tablet Properties in Control panel and it tells me Supported Tablet Not Found on the System. This is my first time dealing with one of these, and am lost.  Lenovo Thinkpad X220 TabletIntel i7-2640M(2.8GHz)8GB RAM, 250GB Solid State Drive12.5in 1366x768 Multitouch LCDIntel HD GraphicsIntel 802.11agnBluetooth1Gb EthernetUltraNav, Secure Chip,Fingerprint reader, Camera

Read other answers

I have bought a new battery for my Thinkpad x201 tablet and replaced the old one because it was not working properly. I bought one from eBay and it works fine holds the charge well, but the issue is that when I check the battery status while it's full it only gives me 88%, not 100% even though that it is fully charged, and I get Plugged in not charging. I searched online and I have found solutions about recalibrating the batteries after replacement, I followed the instructions and drained my battery and recharged it again but still no luck it's still indicated that the battery is full at the 80's range. These are the battery specificationsVoltage: DC 14.4VCapacity: 4400mAh / 58WhCondition: Brand New High Quality Replacement Product, works as Genuine parts, 100% OEM Compatible!!CBK Store Number: B-IBM-35-H Thanks

Read other answers

What is the HIGHEST capacity battery possible I can buy for my Lenovo x201 tablet (i7 640LM)? I would like to know the part number.

A:Highest capacity battery for Lenovo x201 tablet

Hi Kunal,
Welcome to Lenovo Community!
As I understand that you are looking for the highest capacity for your X201t. So as per the Lenovo parts list it can support upto 8 cell

Part no - 42T4827, for more details go through parts list
I hope the above information helps.Please feel free to post in Lenovo Community Forums if you have any further queries!
Tap that Kudos button if I helped.If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

Read other 2 answers

After several minutes into the update I got the message that the ISD driver must be uninstalled! Why it couldn't tell me that before when checking my system for the update is a MS glitch I think. I stopped the update.
This driver is for the touch screen in tablet mode I think so will that facility not work in Win 10 or will there be a Win 10 ISD driver?
I cannot find out from the Lenovo support sites but from Googling 'Win 10 update for ISD driver' I got the Lenovo page link http://support.lenovo.com/us/en/downloads/ds041384 which I don't understand.
Can anyone please enlighten me on this matter - thanks.

A:Win 10 update problem for Lenovo X201 Tablet (ISD driver)

It relates to WinTab which is for pen pressure - nothing about ISD driver - this is my non understanding.

Read other 5 answers

After a fatal error in my windows, I had to reinitialize my windows 10. After I did so by the windows original tools, the windows became completely stable, but all tablet features are lost. Even thinkvantage cannot recognize many features and hardwares do not work. What should I do?

Read other answers

I have just upgraded and activated my ThinkPad X201 Tablet PC (i7 L640 @2.13 GHz, 4GB DDR3 RAM) to Windows 10 Pro (64-bit) from the original Windows 7 Pro (64-bit). The tablet appears to run fine in Windows 10 Pro. However, the Task Manager's Performance tab page shows the CPU run at the frequency between 1.17 and 1.20 GHz, even as the tablet takes several tasks and runs at 60% and above and the tablet's power mode is set to high-performance.

What went wrong? What are the things that I need to check? Please advise.

Read other answers

Hello, I have the X201 ThinkPad. I lost my WIFI connection a several times. But now I lost it and afther rebooting my thinkpad it won't work again.I installed drivers, but nothing works...is there anyone with the same problem? I have Windows 10.. 

Read other answers

Hey Tech Guy and Gals,

I have a Gateway CX2618, w/ windows XP tablet edition 2005 version 2002, sp2. And wanted to wipe it clean and reinstall just the things I use. Plus my Tablet side of things hasn't worked in a long time and I was hoping the clean install would fix that.

But my recovery DVD isn't working (could be user error). I DO have apps that I need to keep and I think I've backed them up to my external HD correctly.

Need lots of help, I don't want to get rid of this lappy cause I love its style, but I need it to have better performance.

Thanks in advance

A:Win.XP.Tablet. Tablet part not working, recovery DVD not working. Plz Help


Read other 2 answers

Hey guys. I don't know what happened to my display, but once I reinstalled Windows 10, the display (under Control Panel -> Hardware and Sound -> Pen and Touch -> Display tab -> Display Options -> Display drop-down box) only shows that I have a mobile pc display. But I know that is not correct. And what's worse is that the tablet buttons are not installed in my system. Those two exact problems might be why only the right side of my touch screen is working. I already have the correct driver for my touchscreen laptop so I'm CERTAIN that's not the problem. Can someone (anyone!) help me with solving the first problem and redirect me toward the tablet buttons I need for my Lenovo B50-30 Touch in order to solve the second? I want my full functionality back on my laptop. Thank you very much. Sincerely,organanon

Read other answers

I have a Tablet drawing monitor, and today the pen stopped working, I fiddled with it for a while, I tried uninstalling the drivers for the Hardware and reinstalling, but then I noticed that the Tablet Settings and Calibration Options you normally see in Control Panel are mysteriously gone. After maybe 2 hrs of googling I've given up,. there's very little on google, and now im considering doing a "Rest This PC." Any help would be appreciated.

Read other answers

 Lenovo ThinkPad X1 Tablet Gen 3 : cannot be used as a tabletObsolete BIOS/ECP with Missing Support for ?no win button? logon(support Power + Volume up button combination to notify "CTRL+ALT+DEL") SITUATIONLenovo ThinkPad X1 Tablet Gen 3 (model 20KK) with Windows 10Company forces the safety policy to No Win Button logon (right decision)The hardware ?Power + Volume up? to replace the CTRL-ALT-DEL is not working on Lenovo ThinkPad X1 tablet gen 3 ISSUE:I cannot use a screen logon to Windows 10 (inhibited by safety policy).I can only logon when the keyboard is connected (to use hard CTRL-ALT-DEL)> The Lenovo ThinkPad Tablet X1 Gen 3 can only be used as a normal laptop? DETAILSSystem Win 10 64b (10.0.16299)Model 20KKS1111JBIOS UEFI 26 (Lenovo N1ZET70W (9/18/2018)ECP 06Note:CTRL+ALT+DEL is implemented by the embedded controller firmware (ECFW, also referred to as ECP)The issue was known and solved by Lenovo for ECP>1.06 on other tablets.(see BIOS1.16//ECP1.08 was solving the issues and also BIOS1.54/ECP1.11)(https://forums.lenovo.com/t5/Enterprise-Client-Management/Unlock-X1-Tablet-without-Keyboard/td-p/335...) QUESTIONSWhy is Lenovo selling tablet with obsolete ECP1.06 on fresh new Lenovo X1 Gen 3 tablet, even in the latest BIOS ?When do you think we have the right ECP update on Lenovo ThinkPad X1 tablet gen 3 ?Any suggestion how to solve/bypass this ? I realize it was stupid to purchase and pay for a tablet and use it as a basic lapt... Read more

Read other answers

Tablet PC Settings not showing in Control Panel Although Tablet PC Components enabled in Programs & Features.
I have tried System Restore, re-enabling Tablet Components...

Read other answers

The latest bios update of X1 Tablet (Model:20GG) breaks the sleep (or hibernation) function. I found the tablet sometimes cannot be waken up by pressing the power button after entering connected standby. The version of the flawed BIOS is1.68-1.21 (N1LUJ30W) After rolling the embedded controller version back to 1.20 (N1LUJ29W), the problem no longer exists.

Read other answers

Hi All, Recently I have been receiving this error message "Tablet Version Mismatch - Please reinstall the tablet software" when I tried to open some of my apps in the LAPTOP mode.I tried to reinstall the Wacom driver (although I do not know what this is for), but it did not work.Any advice would be appreciated!

Read other answers

None of the front facing buttons (Rotate, Volume Down, Volume Up, Windows, P1, P2 and P3) are illuminated.  This makes using the tablet very difficult while driving at night (the tablet is mounted in my Jeep).
I cannot find in any of the Dell utilities where I can turn on and off the illumination of these buttons.  How do I do this?

Read other answers


I'm having difficulties installing the tablet buttons in WINDOWS 8.1 Pro. Everything else works, perfectly.

In Windows 8 Pro this buttons worked nicely, but now, after a clean install of Windows 8.1 Pro two of the buttons don't work. The buttons are the Toshiba assist button and the presebtation button. I've tried to configure them in Toshiba assist software but nothing happens.

I'm sure I've installed all drivers that made wverything work with Windows 8. As anyone tryed this and add success?

A:Portege M750 and Win8.1 Pro -tablet buttons don't work

> I'm sure I've installed all drivers that made wverything work with Windows 8

Windows 8.1 is not Windows 8 and many of Toshiba Win 8 drivers and tools don?t work or are not fully compatible with Win 8.1

As far as I know the Toshiba does not support Win 8.1 on this Portege M750.
This means that no Win 8.1 drivers will be released and in such case some notebook features like the control buttons could not work properly.

Fact is that using Windows Vista or Win 7, such buttons were controlled by Value Added Package. This package does not exist for Win 8.1 and has been replaced by other software called Toshiba System Driver

So in case you want to try to get the buttons to work, I recommend checking this with Toshiba System Driver

Read other 3 answers

Does anyone know if there is a program available (free if possible) similar to Quicken (Deluxe) that I could use on my Android Tablet(HP 10 Tablet G2 -2301)? That would keep track of bank accounts and interest earned, and keep track of one stock IRA and interest earned and yearly RMD? And produce reports for that interest earned, etc.? Mainly for using when preparing yearly tax forms.

A:Quicken alternative for Android Tablet(HP 10 Tablet G2 -2301

Have you looked at Mint.com?

Read other 2 answers

plz help
i have lenovo thinkpad 2 tablet it was not running well so i decided to reset it ...
and it keeps on repeating the same thing...
please help me ....


If it is still under warranty, call Lenovo. IF you tried to reset to factory defaults, and it is still failing, then you have something else that is going bad. My suspicion would be memory as that is what happened to me although it was on a desktop. Something to check...good luck.

Read other 1 answers

As the subject states my computer will not allow me to customize the tablet buttons even with the software installed, even though all of the tablet buttons work when in tablet mode.
More specifically, I'm asking because I would like to change the XT3 Latitude Tablet Back button to be customized for another function. I believe I have the most current dell driver software, that being the feature enhancement pack, but I'm still unsure of the casue. Any response to this post would be very much appreciated.

Read other answers


I have a windows 8 quantum view tablet. It was taking ages too get charge and sometimes the screen just goes black. On the charger is a power setting for volts I turned it up and now my tablet won't come on the light on the charger is blinking instead of a full blue light and the light on the tablet does the same any ideas if the batterie is gone or what can I do


A:Windows tablet not working

You might have a universal charger if it has a volts switch. My brother told me a friend of his bought a
universal charger and he bumped the voltage up too high and it fried the battery and charging circuit of the laptop. Had to send it to the factory for repair, big bucks! never use an adjustable charger! Is it still in warranty? Support here, couldn't open their files https://azulletech.com/support/quantum-view/

Read other 1 answers

since I upgraded to windows 10 the revolve to tablet mode isn't working. The screen isn't rotating and the keyboard is still active. 

View Solution.

A:Tablet mode not working with windows 10

@Enginestechie?, Thanks for posting back.  I understand the frustration.  However the notebook was designed with an operating system in mind and when you upgrade to another OS there are always bumps in the road and this has been the case for ever.  Keep an eye on the hp support site for updates and releases for Windows 10. Thanks again for the post and have a great day.

Read other 7 answers

 Hello! I've got some issues with my tablet.The internal microphone is not working, only microphones connected to the microphone/line-in jack. recording devices in the sound panel on win7: only the "external" microphone (jack) is available                      microphone / line-in jack on the X61t      internal / integrated microphone on the X61t   Any ideas what could be going wrong? Do I need a separate driver?Thanks in advancePete  

lenovo ThinkPad X61t | Windows 7 Pro SP1 64-bit | 4GB DDR2 GeiL | 120GB SSD OCZ

Read other answers

Hi guys, So basically I started fresh installation on windows 10, and when I tried to pull out the tablet because this is a detachable ultrabook the tablet mode didnt went ON so here's what I already tried: Rotation Lock: ON/OFF;When i sign-in into windows-->Use the appropriate mode for my hardware;When i this device automatically switches tablet mode on/off-->don't ask and always switch;Show visual feedback when i touch the screen ON/OFF.It just continues not to work, so I thought that the intel integrated sensor solution driver would work, but it happens I don't find the one for this specific model which by the way is from Portugal,   Cheers, Alexandre Santos     Windows 10 Insider / Android Rom Tester     

Read other answers

I replied in a another post also, sorry for that.. But I hope this post get's more attention. I just bought a x220 Tablet but my touchscreen doesn't work at all. I bought de computer with  Windows 10 installed on it. I just used WacomhardwareCheck and it gave the message: 'your hardware does not appear input capabilities and is not currently supported by the Wacom FEEL driver'.So, does this mean my touchscreen is broken and doesn't work? Is there a hardware problem? How can I see if the touchscreen is registered by Windows?it would be great if someone could help me to get this thing working... I think the touchscreen makes this an interesting machine...

Read other answers

Got a tablet PC, but we lost the original system disc that came with it. Can I simply put WinXP Pro on it or do I have to put Tablet Edition on it?

A:Tablet Edition required for Tablet

Read other 6 answers

I have a laptop (windows 10) that suddenly stopped accessing a number of different random websites, including this one... saying "server DNS address could not be found". Other websites, such as Facebook and yahoo, it still accesses. It does this on the chrome browser and the IE browser. The tablet I'm typing on right now works fine however, and accesses everything without problem. This morning both were working properly; this is a sudden development.

A:Cant access numerous sites on windows 10 laptop; tablet working fine

By the sounds of it your internet service providers main DNS servers are having issues or, network issues. It could be due to your ISP doing network maintenance on their part as well. What can you do? Well instead of using the ISP's DNS you can use a public Google DNS. Inside your router change the DNS to & However, I don't recommend that you permanently change them from your ISP.

Read other 2 answers

After I updated my laptop, the fingerprint sign-in cannot be used and I check the device manager and it says 'This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)', and same problem happens on other devices such as sensors and portable devices. However, I tried usb reboot my pc and I cannot enter in usb boot mode. Anyone has met this before or knows how to fix these problems?

Read other answers

Dear Lenovo-Community,my Thinkpad S1 Yoga change into tablet modus not only when I fold back the monitor but also when I have closed the lid normaly and than reopened it or sometimes by slightly moving the monitor or a minor percussion of the table. That is very annoying, because than I have no access to keyboard or touchpad while beeing in the laptop-shape. I can revive keyboard/touchpad by folding back the monitor and than back to the normal laptop shape, but this works only one time! After that I have to send the thinkpad in the energy saving mode and wake it up, to get keyboard/touchpad back.I think it is a problem with the sensor, but does there a software setting exist so keyboard/touchpad keep unlocked in tablet-modus? Or a way to switch off the tablet-modus completely? I can live without the tablet-modus and the thinkpad is probably too old to be worth a great repair.My system is fully updated. Any idea out there?

Read other answers