Over 1 million tech questions and answers.

windows exception at startup in xp pro

Q: windows exception at startup in xp pro

Hi. I recently reformatted and set up win xp pro, then made a partition with acronis and added Win7. I did so initially with two data HDDs unplugged and an unreadable floppy (write protected) in the floppy drive. Later, with all HDDs and no disk in floppy the exception continues.

All seems well but I get the following exception when I startup XP -
c00000a3 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c

Googling suggests it may be an infection, though NOD was installed pretty quickly (though there was a chance for open connection while xp updated). NOD finds no problems of consequence beyond the ask toolbar nero 6.6 offers as an option at install - no big deal. NOD scans v3 for xp and v4 beta for Win7 show no infections.

I have not used hijack this but am open to it.

The box is asus p5q deluxe, 8500 dual core, 4 gb ocz 1066 memory, nvidia 260, 300 raptor, 500 and 640 HDDs. I've installed xp lots of times, Win7 3x - this is a new issue.

I'd be grateful for any guidance.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: windows exception at startup in xp pro

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 51.2

I installed FileMaker software on windows 8 m/c. But I am facing crash issue. 
I checked on FileMaker site and found this software support .Net framework version 4.5 or later . On this .Net framework version no is 4.6.1. But in application logs it show - 4.0.30319. Here in this image ,is it showing .Net framework version ??

How to solve this crash issue ?? 

Read other answers
RELEVANCY SCORE 48

Hi,

Having an issue with my PC. I actually get 2 "Unhandled Exception" Error messages upon start up. See attached Text Files. Can someone please help?

Many Thanks

A:Unhandled Exception At Startup XP Pro

I would try upgrading your video card drivers. http://www.nvidia.com

Read other 5 answers
RELEVANCY SCORE 48

when i start up windows i get a pop up that says:

Unhandled exception: c0000005
At address: 006616b7

everything i've seen is about delfin and promulgate. after i clicked ok the 1st time a fatal error with promulgate universe pops up...i've looked everywhere for promulgate and i can't find anything, i believe i've already uninstalled it, i've also uninstalled delfin and don't have promulgate anymore. i have not seen anything that has to do with this address. this also comes up when i play grand theft auto: vice city, when i get to a certain part it stops play and this pop up comes up behind it, and when i click ok, it tells me that a fatal error has occured. if you can help me i would greatly appreciate it, its gotten very annoying.

Thanks
 

A:Unhandled Exception on Startup of XP

Read other 16 answers
RELEVANCY SCORE 48

The following message appears when I turn on or wake up my laptop;
Exception EOIeSysError in module SMSystemAnalyzer.exe at 000EFB31 The specified module could not be found, Class ID;
{30C21488-5F00-4F77-BA34-38C6744BEBBB}
I probably can't fix it myself, but would like to know the best path for having someone straighten out the problem for me.
Thanks so much for any help.

Read other answers
RELEVANCY SCORE 46.8

so i downloaded something that happened to have a virus on it.

i knew i was screwed, but didnt know to what extent.

i did a scan and "removed" two instances of the Vundo virus with Vundofix; however, i still got the same pop ups.

i rebooted just as Vundofix said to do and when i tried to reboot it claimed that i had a Windows No Disk error: Exception Processing Message c000013 Parameter 75b6bf9c. (i understand quicktime/itunes has something to do with this occasionally, but think it has more to due with the virus.)

now everytime i boot up i get to the login menu and it loads fine. just before the icons come up though, i get this No Disk error. i click "continue" and another comes up. i do it three times and then it sends me back to the login menu so now i cant even get onto my desktop.

i would just do a clean install, but i've got some important files on my hard drive that i'd rather not part with.

help?

thank you in advance, fernando.

A:XP startup Exception Processing Message c0000013

Hello fernandoBOT

Have you tried booting into Safe Mode?

If you can do that try a System Restore.

If you can`t do that can you access the Safe Mode Options screen (the one with Last Known Good Config etc on it)
Boot into Safe Mode by pressing F8 at bootup and choose
'Safe mode with command prompt'

At the command prompt type

C:\Windows\system32\restore\rstrui.exe

Hopefully this will open System Restore.

Read other 4 answers
RELEVANCY SCORE 46

hi guys,

okay. here I go. everytime I restart the computer, I get a "Windows No Disk error: Exception Processing Message c000013 Parameter 75b6bf9c 75b6bf9c 4 75b6bf9c" popup window. actually, I get two of them. I was trying to read some of the posts and their advice, so I uninstalled quicktime but it still keeps happening. I recently had a 2nd internal hard drive installed so I don't know if that has something to do with it?

I also apparently downloaded something with a virus. I don't know. but everytime I open internet explorer, I get an ad popup of some sort and everything runs reaaaaally slow. it took me like six tries to get on this site. I can't open any of my email sites (yahoo or gmail... or yahoo search or google, for that matter) because they don't load. no errors, just the load bar keeps loading but nothing happens. I have done the add/remove programs thing to look for anything suspicious (nothing), and I finished the panda security scan but was not able to see it because it required me to check my email after registering, which I can't do. I also was not able to get spyware blaster because I couldn't get google to load. I was able to do a HJT scan though, so this is it:

------

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 12:52:23 PM, on 5/4/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\w... Read more

A:No disk: Exception Error message @ startup, tons of problems

Hello kelz,

If you still require assistance, we prefer a more comprehensive set of logs to assist in detecting any malware that may be present. As noted in the final step (Step 5) of our sticky topic IMPORTANT - Read This Before Posting For Malware Removal Help....

Download Deckard's System Scanner (DSS) to your Desktop.

What DSS will do:create a new System Restore point in Windows XP and Vista.
clean your Temporary Files, Downloaded Program Files, and Internet Cache Files, and also empty the Recycle Bin on all drives.
check some important areas of your system and produce a report for your analyst to review.
DSS automatically runs HijackThis for you, but it will also install and place a shortcut to HijackThis on your desktop if you do not already have HijackThis installed.

Note: You must be logged onto an account with administrator privileges.Close all applications and windows.
Double-click on dss.exe to run it, and follow the prompts.
When the scan is complete, two text files will open - main.txt <- this one will be maximized and extra.txt <-this one will be minimized
Copy (Ctrl+A then Ctrl+C) and paste (Ctrl+V) the contents of main.txt in your next reply.
Please attach extra.txt to your post.
To attach a file to a new post, simplyClick the[Manage Attachments] button under Additional Options > Attach Files on the post composition page, and
copy and paste the following into the "Upload File from your Computer"... Read more

Read other 1 answers
RELEVANCY SCORE 45.2

Hello, awhile ago my pc was infected with a virus masquerading as an anti virus program (windows defender I think, I've run malwarebytes anti-malware to get rid of that particular problem). While it was still on my computer it seemed to download some other program or programs which have not gone away and they're causing some serious problems. so far the symptoms are that around 75% of the time, my computer will freeze during startup, and when it does startup I get many messages saying things like " a breakpoint exception has been reached", and "google updater/internet explorer/adobe flash player has encountered a problem and must shutdown". I also am unable to start many programs which worked fine before I got this virus, such as AVG scanner (the main part of AVG works fine, but when I hit scan, nothing happens) Google updater uninstaller (I tried to re-install it when I noticed the error message but it wouldn't start) and probably most important, Malware bytes Anti-malware (this is what I was using to try to get rid of it). I also am unable to perform google searches without being redirected when I click the link. My computer is also just slower in general, and makes lots of noise like its thinking, even when im not doing anything. The things I tried have done so far to get rid of this virus are1. I ran Malware bytes anti malware program, (I had to download a randomly named file to get it to work)This was back when I still had Windows Defend... Read more

A:Freeze on startup, Redirected google searches, and Breakpoint exception error messages

Since I posted last, I have resolved the issue. Please remove this post if you want. thank you.

Read other 1 answers
RELEVANCY SCORE 43.2

This is my fist time on a forum. Sorry if i posted this wrong Or in the wrong place. I will try to explane the problem i have as best i can.
The problem i keep having over the past few days. Is that i will switch my computer on sometimes for hours it will be ok. Then i will get this message and after the message. Every were i place my mouse cursor. All the writing on my screen disappears. Until im left with just empty boxes. On and off the net. And sometimes even all my stuff gos until i am just left with background picture on my computer screen. And have to restart it again. And as i go to restart i get a different Window come up not the same i have had 3 different ones now. I don't know how this come about Im quite sure i do not have a virus But am not totally. Sure about that.
And this dose happen when i am near the end of a full scan with mailwarebytes I did have Emsisoft Anti-mailware first. I have Avira Premium as my main. Anti virus. And that tells me all clear and i have done a scan with Tdsskiller and all other types of things. And they say everything is fine.
This is the message i get on my computer screen And if i click ok or cancel or Even just click the cross in the corner the same thing happens.

The exception unknown software exception (0x40000015) Occurred in the application at location 0x78b2d6fd.

Sorry for bad spelling or grammar. Im in a rush before my computer. Gos wrong again All help will be brill. And thank you'

A:dose anyone know what this means. The exception unknown software exception (0x40000015) Occurred in the application at locatio...

Hi - Is this ever followed by "Click Ok to terminate the program" ? ? It may be a minor infection, or just an Error post -Install the latest version of Malwarebytes' Anti-Malware from This Mirror to your desktop.* Double-click mbam-setup.exe and follow the prompts to install the program.* At the end, be sure a checkmark is placed next to Update Malwarebytes' Anti-Malware and Launch Malwarebytes' Anti-Malware, then click Finish.* If an update is found, it will download and install the latest version.* Once the program has loaded, select Perform quick scan, then click Scan.* When the scan is complete, click OK, then Show Results to view the results.* Be sure that everything is checked, and click Remove Selected.* When completed, a log will open in Notepad form. Please tell us if any infections were found -Thank You -

Read other 6 answers
RELEVANCY SCORE 42.8

Hi ,
i am getting an error message continueosly when i use my ie7 please help me on this error how to solve......."The exception unknown software exception(0xe0434352)occurred in the application at location 0x7c812a6b"

Thanks
Ravi

A:The exception unknown software exception(0xe0434352)occurred in the application at lo

Maybe this will help: The exception unknown software exception (a.k.a. SysFader)

Read other 1 answers
RELEVANCY SCORE 42.8

For a long time now i have been getting BSOD's, pretty much all of the time from System Service Exception and KMode Exception Not Handled. Sometimes the PC never gets to the BSOD and just freezes up and restarts. This happens at any time whether im doing nothing or on the internet, sometimes it happens before the PC can load up fully. Most of the time though it happens when i am gaming. I rebuilt most of my PC but this still carried on. The parts that i have replaces are the PSU, RAM, Graphics Card and the case as well as adding in 2 extra fans. The temperature stays withing good values. The PC also often gets stuck on the post boot screen where it says "SMART Check Capable and OK" and it will take a few minutes for it to get past this stage and carry on loading, but this doesnt happen not all the time. I have tried diagnosing this myself but i have hit a wall. I ran Seatools and the HDD failed all of the tests, however after checking the fail code this was simply because it couldnt find the serial number. The HDD then passed tests from both CrystalDiskInfo and DiskCheckup. I thought that it was either the HDD or the MB as they are the only components not to be replaced. Since HDD seems to have passed its SMART tests i am inclined to believe it is the MB. PLEASE HELP!!!

example of BSOD's in attachment

A:BSOD from System Service Exception and KMode Exception Not Handled

Hello Perry, and welcome to Seven Forums.

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions, and post back with the needed information. One of our BSOD experts should be by later when able to further help.

Read other 2 answers
RELEVANCY SCORE 42.8

Running the SNES emulator snes9x 1.54.1 (which can be downloaded here), I get a BEX error.

This is the error in detail:
This is my computer's info:
This is a video showing the error happening:
snes9x crash - YouTube

I need help. How can I fix this issue?

Read other answers
RELEVANCY SCORE 42.4

Hello!

I keep getting Exception Code 3221225477 with Exception Address 005019A9 on my computer when I start it up and sometimes during my use of the computer.
It just started up after I put a cannon camera photostitch program on my computer. I have deleted. Then I did all the updateds that were needed plus cleaning out my computer(defragmenting, disk clean up, removing temporary files).
I even went in and stopped programs from starting up when I turn on my computer to make it faster and to see if it was one of them that was causing the problem. It still keeps coming up. Does anyone know why this happens?

My message comes up as

Unexpected Error
An Unexpected error has occured and this application will close. Then the exception code and exception address follows.
Exception Code 3221225477 Exception Address 005019A9

But when I click on ok nothing closes and I can work on my computer. Then sometimes during the course of working on the computer, the message comes up again but again nothing closes.

Thank you for taking the time to read this and for any replies.

A:Exception Code 3221225477 Exception Address 005019A9

My guess is that there is a Startup entry which you need to remove. Some remain behind even when a given program may thought to have been completely uninstalled.I'd use AutoRuns for Windows - http://technet.microsoft.com/en-us/sysinte...s/bb963902.aspx to take a look at the items listed on the Logon tab and see if any apparently relate to your troublesome program. If so, I would delete it, but you can either disable or delete that startup item.Louis

Read other 5 answers
RELEVANCY SCORE 42.4

Hi Guys,

I'm a composer working on a deadline and have started to experience quite intermittent BSOD's.
It appears to happen at higher system loads.
I'm reasonably experienced in building custom machines (this is my third on), and so far have never experienced issues with them.
This current one is a racked i7 3930K Hexacore on a Sabertooth x79, with 32gb of Ramm and a GTX470.
I'm using Nuendo 6 in 64 bit mode (Cubase's bigger brother) with an RME Fireface 800.
The fireface runs via firewire and has its own pcie card for this.
In addition there is an external G-tech drive connected via Esata.

In the last week I've been having 1-3 bsod's a day..a real productivity killer and I hope someone can help me out. I've used Whocrashed to at least get an indication of what it might be, but I don't have much experience with minidumps.

The only thing that I have noticed is that Windows is attempting a surface scan during startup, which fails due to a 'recently installed software package' I have no idea what that might be.
I've not been able to do a diskchk on C:
Regardless, C: seems to work fine and I've not noticed any issues.

Drivers are pretty much up to date.

I'm attaching a dump, would someone mind having a look and giving me a clue? Thanks in advance!

Joe

link to dump:
https://www.dropbox.com/s/avmzs9jxsf...3-35006-01.dmp

A:BSOD - Kmode exception and System Service exception

We need a few more files. Please follow the instructions in this thread:
Blue Screen of Death (BSOD) Posting Instructions

Then attach your files here directly using the paperclip icon.
Attachment 280245

Read other 5 answers
RELEVANCY SCORE 41.6

Having problems with my computer running Windows XP Pro 2002 SP3. Had a virus that attacked a different computer on our network and ran Malwarebytes, Spybot and Avast. All scans came up clean. If I leave the computer for awhile (several hours) my "All Programs" list goes away, the list of recently used applications is gone and if I try to do a Shutdown or Restart it comes back that "I am not authorized to do that". I am now also getting exception errors:
"exception unknown software exception (0xc00000fd) occurred in the application at location 0x01006a25" and "explorer.exe application failed to initialize properly (0xc000012d)". In an effort to try stop antivirus programs from conflicting with each other, I uninstalled malwarebytes and have avast running in resident and Spybot not in resident but demand only. Any help would be greatly appreciated.

Read other answers
RELEVANCY SCORE 40.4

Keep getting an error on shutdown that says "The exception unknown software exception (0xe0434352) occurred in the application at location 0x38d6811c".

See attachment for more details.

A:The exception unknown software exception...

What do you have running in the backround when you try and shut down?

Try exiting all the taskbar programs in turn and doing a shutdown after each , hopefully this will show which app is causing the issue.

Read other 6 answers
RELEVANCY SCORE 39.2

I own a Dell Inspiron 3521 laptop. In the very first month I started getting a blue screen and fatal error UNEXPECTED STORE EXCEPTION. There is no error code.

Dell support replaced the hard disk and then for a few months the error did not occur. Again I'm facing the same issue after warranty has expired.

I upgraded to windows 10.

Now, This is happening too often and I lose the work that is unsaved. Please help.

A:Dell 3521 BSOD UNEXPECTED STORE EXCEPTION Initially Windows 8 now on WINDOWS 10

I don't remember seeing actual BSODs caused by a Store situation.  But since it seems to be happening, can you put the dump file on your OneDrive and give us a link?
We might be able to gain some insight into the situation.
If someone were to suggest you do a Clean install of Win 10, would you consider it?  I assume there are Win 10 drivers for that system?  Is there a Win 10 Recovery image available for download?

Read other 1 answers
RELEVANCY SCORE 38.4

hello all,
I have a fully patched Windows Vista 32-bit computer with ESET Smart Security, malware bites paid, Emisoft anti-malware as my security programs. When I tried to run http://jeremy.wisconsinbroadcasting.com/alternativechicago/index.html listen live, I get a Windows bad image error "exception processing message 0X see 000007 b parameters 0X760D91B0 0D91 B0 and the same error a second time after that. Doesn't honestly matter if I reformat the computer from scratch, the error always happens after I install Windows service pack two and the updates. running all the security programs and scan in safe mode comes up empty with no infections. I'm honestly at a loss at what to do-because I really do want to keep reformatting the machine and only getting up to that error.

the only program I really need is my Dragon NaturallySpeaking to speak into the computer and the contents display on the screen.

is my poor computer too far gone?thanks for any help

Matt

Read other answers
RELEVANCY SCORE 38.4

Hi,
I am getting Windows - No Disk exception. This is bugging a lot.
I tried in safe mode also. There also same exceptions is coming.

Please help.
 

A:Windows - No Disk Exception

Is this happening when you insert a USB device? Could I have little more information?
 

Read other 1 answers
RELEVANCY SCORE 38.4

Hi

I recently had to replace my Dell printer- when I hooked up an HP -I started to receive this message- "Windows-No Disk--Exception Processing Message
C0000013 Parameters 75b6bf7c 4 75b6bf7c 75b6bf7c"---thought it was the printer-then I changed it and bought a Kodak- same thing. Then I searched online and found many people getting this message. I even went to msconfig, startup and unclicked the qqtask--still I receive this message- once I uninstall the software, the message is gone. I ended up buying another Dell same as the one that broke- that hasn't arrived yet. In the meantime, I decided to send this log from HiJack This to see if it may be something else. Please review the log and help me.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 6:22:13 PM, on 12/11/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\ANI\ANIWZCS2 Service\ANIWZCSdS.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\Common Files\Motive\McciCMService.exe
C:\Program Files\Norton AntiVirus\Engine\16.7.2.11\ccSvcHst.exe
C:\Program Files\Common Files\Star... Read more

A:windows -no disk exception

Read other 8 answers
RELEVANCY SCORE 38.4

please help everytime i start up the pc i keep getting this message appear:

windows no disk:
Exception prossing message c0000013 parameters 75b6bf9c 4 75b6bf9c 75b6bf9c

then with the options to cancel try again or continue, it does matter which one i choose as this message will still appear when i next turn on the pc.
 

A:windows no disk exception

Checkout: http://support.microsoft.com/default.aspx?scid=kb;en-us;823613&Product=winxp

Let us know if it helps.
 

Read other 2 answers
RELEVANCY SCORE 38.4

i think this one will help, i have a Play station 4 , they told me to do exception so you can find lobby when you play online, can you please tell me which exception that i need to do so i can find players to play with


Thank you very much

Jalal.

Read other answers
RELEVANCY SCORE 38.4

My Windows XP Desktop was operating a little slower then usual, so I rebooted it with the Shutdown:Restart windows command. It will now only boot up to mup.sys and hangs.
I was troubleshooting and thought I would try to eliminate the mouse and keyboard as a possible cause.
I unplugged USB mouse and keyboard (This PC only has USB connections for mouse and keyboard) and rebooted the PC. The PC booted up correctly. So I got my mini laptop and tried a remote connection. The PC works perfectly as a host for a Remote Desktop as long as the PC and Mouse are unplugged.
I have tested the keyboard and mouse on another PC and they both work fine.
Any ideas of what might be corrupted to cause this problem.
 

Read other answers
RELEVANCY SCORE 38.4

here is the log file
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 1:13:01 PM, on 10/16/2008
Platform: Windows Vista SP1 (WinNT 6.00.1905)
MSIE: Internet Explorer v7.00 (7.00.6001.18000)
Boot mode: Normal

Running processes:
C:\Windows\system32\taskeng.exe
C:\Windows\system32\Dwm.exe
C:\Windows\Explorer.EXE
C:\Program Files\Windows Defender\MSASCui.exe
C:\hp\support\hpsysdrv.exe
C:\Program Files\Hewlett-Packard\On-Screen OSD Indicator\OSD.exe
C:\WINDOWS\RtHDVCpl.exe
C:\Program Files\Microsoft Office\Office12\GrooveMonitor.exe
C:\Program Files\Hewlett-Packard\ToolboxFX\bin\HPTLBXFX.exe
C:\Program Files\Common Files\Seagate\Schedule2\schedhlp.exe
C:\Program Files\ScanSoft\PaperPort\pptd40nt.exe
C:\Program Files\McAfee.com\Agent\mcagent.exe
C:\Program Files\Seagate\DiscWizard\DiscWizardMonitor.exe
C:\Program Files\Seagate\DiscWizard\TimounterMonitor.exe
C:\Program Files\Adobe\Acrobat 8.0\Acrobat\Acrotray.exe
C:\Program Files\Java\jre1.6.0_07\bin\jusched.exe
C:\Program Files\McAfee\MBK\McAfeeDataBackup.exe
C:\WINDOWS\System32\rundll32.exe
C:\Program Files\Norton Ghost\Agent\VProTray.exe
C:\Program Files\HP\HP Software Update\hpwuSchd2.exe
C:\WINDOWS\WindowsMobile\wmdc.exe
C:\Program Files\Intel\Intel Matrix Storage Manager\IAAnotif.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\WINDOWS\ehome\ehtray.exe
C:\Program Files\Windows Sidebar\sidebar.exe
C:\Program Files\Common Files\InstallShield\UpdateService\ISUSPM.exe
C:\Program Files\Speaking Clock Deluxe\SpClDlx.exe
C:\Pr... Read more

Read other answers
RELEVANCY SCORE 38.4

What is exception in firewall? ipsec means what?
 

A:Windows Firewall exception

Internet Protocol Security (IPsec) is a protocol suite for securing Internet Protocol (IP) communications by authenticating and encrypting each IP packet of a communication session.Click to expand...

On linux platforms, it is literally the name of the firewall itself.



What is exception in firewallClick to expand...

First, the firewall has defaults and they become the baseline. The common defaults are:

allow nothing inbound
allow all outbound
User defined rules become the "exceptions" usually to allow more control, as in DENY all outbound and then ALLOW specific programs to access the web, eg your browser, email and any host servers. This stops many forms of virus' from "calling home"
 

Read other 1 answers
RELEVANCY SCORE 38

Hi,

The server has windows 2008 and suddenly it started to restart every few hours. The reason seems as fatal exception.
Attached please find Echo zip file and health check and autorun zip file.

I see in the health check that it says windows cannot find anti-spyware program. On the server installed NOD 32 anti virus.

? OS - Vista/ Windows 7 ? Windows server standard, 32bit
? What was original installed OS on system? Windows server standard
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? full retail
? Age of system (hardware) around 6 years
? Age of OS installation - have you re-installed the OS? around 4 years
? CPU - 2 X Processor Intel(R) Xeon(TM) CPU 3.20GHz, 3200 Mhz, 1 Core(s), 2 Logical Processor(s)
? Video Card - Standard VGA
? MotherBoard - HP
? System Manufacturer - HP
? Exact model number (if laptop, check label on bottom) - HP ProLiant DL360 G4p

Thank you for your help !

A:Windows 2008 restart because of exception

This bugcheck indicates a system thread generated an exception which was unexpected and therefore wasn't able to resolved.


Code:
BugCheck 1000008E, {c0000005, 936cf22f, 92ed211c, 0}
The cause is from an access violation where memory was referenced which couldn't be addressed.


Code:
3: kd> .trap 92ed211c
ErrCode = 00000000
eax=8b04c910 ebx=00000005 ecx=8b04c924 edx=00000000 esi=921d0ae3 edi=95466398
eip=936cf22f esp=92ed2190 ebp=92ed2198 iopl=0 nv up ei ng nz na po nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010282
RDPWD!SListRemove+0x5d:
936cf22f 8b3cf1 mov edi,dword ptr [ecx+esi*8] ds:0023: 1bed203c=????????
A pointer was stored in 1bed203c by dereferencing edi (grabbing the data and moving it) then storing it in that address by calculating ecx+esi multiplied by eight.
We can't see whether or not it's a valid address as the page table entries haven't been stored.


Code:
3: kd> !pte 1bed203c
VA 1bed203c
PDE at C03001BC PTE at C006FB48
Unable to get PDE C03001BC
The faulting function RDPWD!SListRemove+0x5d is always the cause, it's undocumented but I suspect it involves removing an entry in a singly linked list for a network related device.

I suggest enabling Driver Verifier as it seems a driver is the cause.

What is Driver Verifier?

Driver Verifier monitors Windows kernel-mode drivers, graphics drivers, and even 3rd party drivers to detect illegal ... Read more

Read other 2 answers
RELEVANCY SCORE 38

Hey Guys, been getting this blue screen alot and rather randomly. I already set machine to standard speed and its still happening.

BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF960001577D3
BCP3: FFFFF8800AE24B80
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

System

Core 2 Quad Q6600
Gigabyte EP-45 UD3P
EVGA 285 GTX
4GB G.Skill
X-FI

I also tried running sfc/scannow it gets to 80% and says cannot complete operation?

Ive attached the log, help please :-)

A:Windows 7 - System Service Exception

  
Quote: Originally Posted by Nick2730


Hey Guys, been getting this blue screen alot and rather randomly. I already set machine to standard speed and its still happening.

BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF960001577D3
BCP3: FFFFF8800AE24B80
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

System

Core 2 Quad Q6600
Gigabyte EP-45 UD3P
EVGA 285 GTX
4GB G.Skill
X-FI

I also tried running sfc/scannow it gets to 80% and says cannot complete operation?

Ive attached the log, help please :-)


If it fails on sfc /scannow then your system has a problem. Do you have a backup yoou can restore from? Do you have the win 7 dvd to do a repair install?
Ken

Read other 3 answers
RELEVANCY SCORE 38

Can anyone tell me how to create an exception in windows firewall so I can play my game. I have windows10 on 4 computers but my newest laptop wont go to my games site it says there is something wrong with the security certificate. I have been playing games on this games site for about 10 years with no real problems. I have norton security on this latest laptop, I have never liked norton
but decided to give it another chance on my latest laptop. Now I dont know if its the firewall or norton causing this problem but i'me biased against norton, still going to give it a chance though so i'll concentrate on creating an exception in the firewall first. Can someone tell me how to do this in windows10?

A:How to create an exception in Windows 10 firewall

Hi,

What version of Norton? It very likely comes with a firewall, in which case, Windows firewall should be disabled.

Not sure you need to create an exception anyway, have you tried this?

There is a problem with this website's security certificate in IE

Read other 10 answers
RELEVANCY SCORE 38

HI guys. I am getting this message twice everytime time i reboot. I read some old files and see that I need to post a highjackthis log. I am doing so now please help if you can - thanks sean

Logfile of HijackThis v1.99.1
Scan saved at 22:50:15, on 29/12/2007
Platform: Windows XP SP3, v.3264 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP3 (6.00.2900.3264)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Common Files\Symantec Shared\ccSvcHst.exe
C:\Program Files\Common Files\Symantec Shared\AppCore\AppSvc32.exe
C:\WINDOWS\System32\wltrysvc.exe
C:\WINDOWS\System32\bcmwltry.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\Common Files\Symantec Shared\ccSvcHst.exe
C:\Program Files\Nero\Nero8\Nero BackItUp\NBService.exe
C:\Program Files\CyberLink\Shared files\RichVideo.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\BT Auto Backup\VaultClientSRV.exe
C:\WINDOWS\SOUNDMAN.EXE
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
C:\WINDOWS\system32\ctfmon.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\BT Broadband Desktop Help\bin\mpbtn.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\WINDOWS\system32\notepad.exe
D:\Bitdowns\New BitsBT\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http:... Read more

Read other answers
RELEVANCY SCORE 38

I get this pop-up every time I load. I cleaned the registries using a commercial program, but this annoying message is still there. Does anyone know how to get rid of it?

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 1:05:47 PM, on 12/4/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\WINDOWS\arservice.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\Common Files\LightScribe\LSSrvc.exe
C:\WINDOWS\system32\dllhost.exe
C:\WINDOWS\system32\ctfmon.exe
C:\WINDOWS\ehome\ehtray.exe
C:\WINDOWS\eHome\ehmsas.exe
C:\WINDOWS\RTHDCPL.EXE
C:\Program Files\Java\jre6\bin\jusched.exe
C:\Program Files\Updates from HP\9972322\Program\Updates from HP.exe
C:\WINDOWS\system32\TELNET.EXE
C:\WINDOWS\explorer.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Opera\opera.exe
C:\Program Files\Malwarebytes' Anti-Malware\mbam.exe
C:\Program Files\Trend Micro\HijackThis\HijackThis.exe

R1 - HKCU\Software\Microsoft\Int... Read more

Read other answers
RELEVANCY SCORE 38

I had my HP Pavilion DV4000 running as I always do, but this time when I cam up too it there was a black screen

TRAP C0000005 EXCEPTION

tr=FFFF cr0=00000000 cr2=00039000 cr3=00000060
gdt limit=03FF base=0003F000 idt limit=07FFF base=0003F400

cs:eip=0002:00000008 ss:esp=0030:005EBA8 errcode=0000
flags=1D687FFA NoCy Zr IntEnUp TrapEn
eax=00000000 ebx=00000510 ecx=0000000C edx=0000009F ds=0000 es=7FFA
edi=00051D68 esi=00057F8A ebp=00057F72 cr0=00000000 fs=0060 gs=0000

It will not boot at all, I get the hp invent screen with the options to
press esc to change boot order
press (F10)to enter setup; press F12 to boot from LAN

then the black screen with the above error. When I instsert my recovery disk it tries to boot but I get the same error except a blue screen

Please help
 

A:TRAP C0000005 Exception with Windows XP Pro

Well the problem was found .... Memory went bad .. removed one and it booted up slow but it booted UP .... so just wanted to make sure incase this happens to anyone !!!!
 

Read other 1 answers
RELEVANCY SCORE 38

I want the Firewall to exclude a particular IP address i.e allow this address to connect to my computer.

I have little knowledge of firewalls .

I would appreciate any assistance on this matter.

Regards
 

A:Windows XP Firewall exception IP Address

Read other 8 answers
RELEVANCY SCORE 38

hi

im having a problem with the Win Firewall that comes with Win Xp sp2 i cant ping this machine using a hostname but have no problems if i use the ip address which is a problem because the Dhcp server automatically generates a new ip , i have tried allowing sum exceptions such as under the ICMP tab of the firewall i have allowed INcoming Echo request but it hasn't helped , the firewall also blocks UltimateVnc from remotely connecting to this computer it comes up with "unable to find host server "

I will be grateful to any help plz !!
 

A:Windows Firewall Exception Problems

Does it work with the firewall off?
 

Read other 3 answers
RELEVANCY SCORE 37.6

Hey everyone,

About three weeks ago i started having problems with java.
I removed the old builds with JavaRa.
After that i went to the Control Panel, where i removed some builds that JavaRa didn't detect.
I've set the JDK path in the PATH system variable.
In the HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Runtime Environment, the "currentversion" variable is 1.8.
But everytime i start, for example, Minecraft, i get this:



Problem details:

Problem signature:
Problem Event Name: APPCRASH
Application Name: java.exe
Application Version: 8.0.25.18
Application Timestamp: 54345ca0
Fault Module Name: StackHash_6c95
Fault Module Version: 6.1.7601.18869
Fault Module Timestamp: 556366f2
Exception Code: c0000374
Exception Offset: 00000000000bfc22
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 6c95
Additional Information 2: 6c9598dce11d532ca85343c6a66626b7
Additional Information 3: 22bc
Additional Information 4: 22bc6c5b2c92a40574c7d0615d3bd354

------------------------------------------------------------------------

When i registered for this forum, i wanted to see my motherboard model, so i ran dxdiag in cmd.
Then this popped up:



When i click yes, it runs normally.
When i click no, i get this:



Problem details:

Problem Event Name: APPCRASH
Application Name: dxdiag.exe
Application Version: 6.1.7600.16385
Application Timestamp: 4a5bc310
Fault Module Name: StackHash_370f
Fault Module Version: 6... Read more

A:Windows 7 APPCRASH - exception code c0000374

Run cmd as admin and execute: sfc /scannow

Read other 9 answers
RELEVANCY SCORE 37.6

Hi folks,

Like a few other people on this site I'm having a bit of trouble with the error message:

Windows - No Disk
Exception Processing Message c0000013 Parameters 75b6bf7c 4 75b6bf7c 75b6bf7c
|Cancel | Try Again | Continue|

A couple of days ago AVG spotted a trojan attmepting to install itself on my machine and it moved it to the virus vault. In the Virus Vault its labelled as "Trojan Horse Java/Downloader.P"

Since then I get the error message above every time my PC boots.

I have followed the instructions for posting for Malware Removal Help. The DDS.txt file follows this introductory message and the attach.txt is attached in a zip as intructed. I couldn't get GMER to save an ark.txt file as I kept getting a BSOD when i tried to save the txt file.

Any help greatly appreciated!

DDS.txt as follows:


DDS (Ver_10-03-17.01) - NTFSx86
Run by Neil at 14:27:34.79 on 07/08/2010
Internet Explorer: 8.0.6001.18702 BrowserJavaVersion: 1.6.0_13
Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.3326.2457 [GMT 1:00]

AV: AVG Anti-Virus Free *On-access scanning enabled* (Updated) {17DDD097-36FF-435F-9E1B-52D74245D6BF}

============== Running Processes ===============

C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost -k DcomLaunch
svchost.exe
C:\WINDOWS\System32\svchost.exe -k netsvcs
svchost.exe
C:\Program Files\AVG\AVG9\avgchsvx.exe
C:\Program Files\AVG\AVG9\avgrsx.exe
C:\Program Files\AVG\AVG9\avgcsrvx.exe
s... Read more

A:Windows - No Disk Exception Processing Message

Hello Nelpiece,

The files removed by AVG would only be java cache and shouldn't be the source of that error message. It's likely coincidence, since I do see infection running in your log. Before we proceed, I do need to see a log from a rootkit scanner. Please download Rootkit Unhooker and save it to your desktop.

Close all open programs and browsers, then Double-click RKUnhookerLE.exe to run it.Click the Report tab, then click Scan
Check Drivers, Stealth Code, Files, and Code Hooks
Uncheck the rest, then click OK
When prompted to Select Disks for Scan, make sure C:\ is checked and click OK
Wait till the scanner has finished then go File > Save Report
Save the report somewhere you can find it. Click Close
Copy the entire contents of the report and paste it in your next reply.

Note** you may get the following warning. Please click OK to continue:

"Rootkit Unhooker has detected a parasite inside itself!
It is recommended to remove parasite, okay?"

Read other 11 answers
RELEVANCY SCORE 37.6

[font="Comic Sans MS"][size="2"]I may be requesting in the wrong forums but, this is bothersome for me so I a trying different venues to solve this issue. I have HJT installed so I can copy/paste that as well. My computer is a HP Pavilion a530n running XP home sp3.
Anytime I reboot, this box pops up. It has a red circle with an X. with the following statement(s). "ExceptionProcessing Message c0000013 parameters75b6bf7c 4 75b6bf7c 75b6bf7c." Under that are 3 buttons ... Cancel, Try Again and continue.
There is an image at http://www.consumingexperience.com/2007/11...processing.html
I have to click on cancel or continue four (4) times to get it off the screen. Then within 5 minutes it will appear agan and I have to click it 4 times again before it stops. I had one other statemnt on one of second four, as follows ... "There is no Disk in the drive. Please insert a disk in Drive ???." Beyond these two instances, I can go about my day with projects and browsing. This error won't come up again until I re-boot.
Following is DDS.txt.[/font[/size
DDS (Ver_10-03-17.01) - NTFSx86
Run by Owner at 11:32:57.35 on Wed 03/17/2010
Internet Explorer: 7.0.5730.11
Microsoft Windows XP Home Edition 5.1.2600.3.1252.1.1033.18.1023.457 [GMT -5:00]

FW: Sygate Personal Firewall *enabled* {BE898FE3-CD0B-4014-85A9-03DB9923DDB6}

============== Running Processes ===============

C:\WINDOWS\system32\svchost -k DcomLaunch
svchost.... Read more

A:Windows-No Disk/ "Exception process Message"

I bumped this to the top, not to agitate anyone but, to inform anyone interested that I went back to the site I provided the link for in my initial post. I failed to realize how simple the steps were to change the drive letters. After going through all the stress of following 14 pages to post everything here and already seeing 45 views and no reply, I thought I had better go back there (consumingexperience.com). I got up the nerve to follow the detailed steps to change the Drive letters and reboot. I am happy I did because it worked. Those annoying pop ups are gone.Thank all of you for your time !!!

Read other 2 answers
RELEVANCY SCORE 37.6

I recently built myself a new computer, but I seem to be having some trouble with games. In every single game I've tried installing (most notably Dungeon Siege, Homeworld, and Homeworld: Cataclysm) I get crashes at random intervals. I've been able to run the Homeworld games for over an hour at times without any problems, but Dungeon siege crashes just about every minute!

Dungeon siege gives me the error, "Exception Detected!" and then tells me that it needs to close the program.

Here's my computer setup

Athlon XP 2400+
Soyo Dragon KT-400 Ultra Mobo
1 Gig Mushkin Blue 3200 DDR 400 (tested for errors using memtest 86)
120 Gig Western Digital Hard Disk
Radeon 9500 Pro
Sound Blaster Audigy 2
TDK Velo-CD CD/RW (52x/24x/32x)
Standard Floppy Disk Drive.
Koolance EXOS cooling system Connected to the Processor, Video Card, and Mobo Chipset
Windows XP Pro SP1
The latest graphics and sound drivers.
Direct X 9.0b

Here's what I've tried so far.

Reinstalling the games several times.
Defragging and running Checkdisk (bad sector search)
Running the games with only DX 8.1
Reformatting.
Running the games with only minimal drivers, no other programs installed.
Disabling Write Caching and DMA on my hard drives.

On a related note, a couple of my media players, such as the Core Media Player and Winamp 3 have been crashing as well.

I'm totally at a loss. Please help!
 

A:Random Crashes/Exception errors in Windows XP Pro

this was given to me by a member

Go to http://ftp.sierra.com/patches/pc/ and download hwcpatchv101_<country>.exe .

I selected hwcpatchv101_usa.exe to save to my hard drive. I ran the exe. It searches for existing Cataclysm (takes a while... just let it run).

After the patch, I unset the compatability settings just to see if it made any difference. It works fine with no compatability set.
 

Read other 1 answers
RELEVANCY SCORE 37.6

Tried to to run System Restore but after selecting the restore point and clicking on next I get the following: exception 0x80010105 and then it shuts down.

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz, Intel64 Family 6 Model 37 Stepping 2
Processor Count: 4
RAM: 3892 Mb
Graphics Card: Intel(R) Graphics Media Accelerator HD, 1722 Mb
Hard Drives: C: Total - 59999 MB, Free - 29465 MB; D: Total - 406836 MB, Free - 311829 MB;
Motherboard: Dell Inc., 08CNC9, A06, .BYQB8M1.CN4864304M4560.
Antivirus: Microsoft Security Essentials, Updated and Enabled
 

A:Windows 7 System Restore exception 0x80010105

It's a message more commonly associated with runtime errors something that didn't happen quite quickly enough. How many times have you tried it? You may get a better class of System Restore from the Repair options on your W7 DVD which would be running outside the GUI.

 

Read other 3 answers
RELEVANCY SCORE 37.6

Hello, i hope i can get some help, I have HP Windows 7, My son went to download a show off of some unsafe website now my pc is so screwed up, It freezes, pages wont respond. I don't know for sure if these error messages are causing the problem, I can't do a restore there is something wrong with it, the 2 1/2 years that i've had this pc haven't i been able to use it, i have always got error messages there too. i don't know what this 220.dll is..

DLL
There was a problem starting C:\users\Aaron\AppData\Roaming\Microsoft\Crypto\RSA\RSA\RSA1657909220.dll
Access is denied

Error 2

Windows - Fail fast exception

A fail fast exception handlers will not be evoked and the process will be terminated immediately

Isn't there a free program that finds problems and fixes them, Any help would be much appreciated.

Thank you,
KaLani
 

Read other answers
RELEVANCY SCORE 37.6

Hello, I get an exception blue screen with the following details once in a while. And after the computer reboots, I get this error details to check for a solution from Microsoft:
Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 1033 Additional information about the problem: BCCode: 116 BCP1: FFFFFA80053ED4E0 BCP2: FFFFF880050241A0 BCP3: FFFFFFFFC0000001 BCP4: 0000000000000003 OS Version: 6_1_7601 Service Pack: 1_0 Product: 256_1

I really don't know what is wrong with my computer that I get this exception error! I attached the file information using the automated CMD prompt that I downloaded from you so that you can look and tell me if something specific is wrong with my computer that it crashes once in a while, thank you.

Read other answers
RELEVANCY SCORE 37.6

Hello all! Been a while since I posted. I have a quick question (I hope).

I was browsing through my windows Firewall, and noticed that there are two listings of "dll32" in my exceptions list. They are associated with a TCP and UDP port respectively. I don't recall adding them, and I'm just concerned that they are part of something malicious. Does anyone else have those on their Windows Firewall Exception list? Should I remove them? Is it the sign of some infection?

A:DLL32 in Windows Firewall Exception List?

Is it the sign of some infection?I would say no but why don't you run a quick scan to be sureSome types of malware will disable Malwarebytes Anti-Malware and other security tools. If MBAM will not install, try renaming it first.Right-click on the mbam-setup.exe file file and rename it to mysetup.exe.Double-click on mysetup.exe to start the installation.If that did not work, then try renaming and changing the file extension. click this link if you do not see the file extensionRight-click on the mbam-setup.exe file, rename it to mysetup and change the .exe extension to .scr, .com, .pif, or .bat.Then double-click on mysetup.scr (or whatever extension you renamed it) to begin installation.If after installation, MBAM will not run, open the Malwarebytes' Anti-Malware folder in Program Files.Right-click on mbam.exe, rename it to myscan.exe.Double-click on myscan.exe to launch the program.If that did not work, then try renaming and change the .exe extension in the same way as noted above.Double-click on myscan.scr (or whatever extension you renamed it) to launch the program.If using Windows Vista, refer to How to Change a File Extension in Windows Vista.Be sure to update MBAM through the program's interface (preferable method) or manually download the definition updates and just double-click on mbam-rules.exe to install. Then perform a Quick Scan in normal mode and check all items found for removal. Don't forgot to reboot afterwards. Failure to reboot normally (not into safe mod... Read more

Read other 3 answers
RELEVANCY SCORE 37.6

Hello Friends,

I am taking a leap of faith here by posting but I have a feeling you can help.

The problem:
Computer gave me the No Disk Exception Processing Message pop up warning window after Windows XP started. I did some research and it pointed to possibly being an issue fixed by HijackThis which then sugested I post here for help with my logs etc. Also about every other time now when I turn on my computer it does not make it to the XP login screen. Just goes to a black screen and holds... Nothing happens... I have to hit the restart button and then it asks if I want to load in safe mode. Anyway the computer definitely runs a bit slower these days. I have Zonealarm, and I run adaware and spybot. I use the free AVG virus scanner which did not find any viruses in a scan I just did.

Thanks in advance! I hope I posted this correctly, my appologies if I did not.

Secondary if you have time:
- I would love to stop msn messenger from starting up every time I turn on my computer. Any ideas on how?
- Any advice on speeding up my comp. I run defrag and run disk clean up all the time.
- How do I use hijack this to stop certain things from running correctly?
- Any advice is welcome. Thank you thank you thank you

DDS (Version 1.1.0) - NTFSx86
Run by admin at 20:33:35.85 on Tue 12/30/2008
Internet Explorer: 7.0.5730.11 BrowserJavaVersion: 1.6.0_10
Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.2047.1109 [GMT -8:00]

AV: AVG Anti-Virus Free *On-access scan... Read more

A:Windows - No Disk Exception Processing Message

Welcome to BC

Sorry for the delay.

Since its been more than a week, i need a fresh Hijackthis log. Thanks

Read other 3 answers
RELEVANCY SCORE 37.6

Hello

Very recently my unit started with the annoying message. If I uninstall the floppy drive, it goes away. It come back, if I reinstall the floppy drive. I have uninstalled some stuff already, with no success. Virus and malware scans are not finding anything. I tried uninstalling a newer verison of Nero, it will not uninstall? I have some recent windows fixes installed also. Can anyone tell me from my Hijack this listing of the most likely culprit. Thanks in advance!

Rich

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 8:41:52 AM, on 3/31/2009
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\ZoneLabs\vsmon.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\EPSON\EBAPI\eEBSVC.exe
C:\Program Files\a-squared Free\a2service.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\Program Files\Nero\Nero8\Nero BackItUp\NBService.exe
C:\Program Files\Eset\nod32krn.exe
C:\WINDOWS\system32\nvsvc32.exe
C:\WINDOWS\system32\HPZipm12.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\NWTRAY.EXE
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\DNA\btdna.exe
C:\Program Files\SUPERAntiSpyware\SUPE... Read more

A:Windows - No disk Exception Processing Message

I fixed the issue. It was either taking removable drive from the boot sequence or updating nero 8 to the current download. I did both at the same time.
 

Read other 1 answers
RELEVANCY SCORE 37.6

Whenever I start my computer I get this error message: Windows no disk exception processing message c0000013 parameters 75b6bf9c 4 75b6bf9c.
I have the option of cancel, try again, or continue. It takes several clicks of the cancel button to make it go away.

I am not a computer person by any means, so I googled the error to see if any one else in the world was having the same problems and perhaps fixed it. I saw that someone renamed their drives for removable disks and the problems was fixed, so I thought that I might do the same. However when I open disk management all there is, is Drive E and F. There is no C/D drives. Shouldn't there be? How do I get them back??? Please help!!!

I have no computer experience so simple and explicit terms would be greatly appreciated.

My operating system is windows xp, I have a gateway gt4015E computer. If you need more info please let me know
 

A:Windows no disk exception processing message

Your problem is related to the infection you have. Please don't start multiple threads.

Closing thread.
 

Read other 1 answers
RELEVANCY SCORE 37.6

Hello everyone its me again with another problemo. I just restored my windows from a backup i had of an image of my HDD (Thanks to you guys for that btw ) and after installing and updating my computer looks brand new. the only thing that is bothering me is that now something keeps coming up and always comes back. it says:

Windows - No Disk Exception

Exception Processing Message c0000013 Parameters 75b6bf7c 4 75b6bf7c 75b6bf7c

[Cancel] [Try Again] [Continue]

Any ideas guys? I searched around and cleared my quicktime cache which did nothing (unless i did it wrong).

As always thanks in advance for all your help as it is greatly appreciated!
 

A:Windows - No Disk Exception Processing Message

Read other 10 answers
RELEVANCY SCORE 37.6

... 0xc0000013 parameters 0x75ea92a0 0x00000004 0x75ea92a0 0x75ea22a0


what is this message mean and how can i fix it?

A:windows no disk...Exception Processing message

Its saying there is no disc in the drive. What did you last install or run from a disc.

Read other 8 answers