Over 1 million tech questions and answers.

other pc not usb port not recognizing anything

Q: other pc not usb port not recognizing anything

I tried putting a few things in ther and it doesnt recognize anything
I went to device manager and it says it needs a driver I tryied downloading one it the pc couldnt find one on line
help please ema

RELEVANCY SCORE 200
Preferred Solution: other pc not usb port not recognizing anything

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: other pc not usb port not recognizing anything

check pnp is enabled in the bios

in the device manager click on view at the top and in the dropdown
show hidden devices
then uninstall all listed usb items
turn the computer off
unplug usb plugs
reboot twice
replug in the usb plugs

Read other 1 answers
RELEVANCY SCORE 52.4

My first time posting on these forums, not sure where to put the thread so I'll just leave it here.
I tried today to use my 3rd Generation iPod Nano as a flash drive to use it with Readyboost to boost my memory, but when I got to the Readyboost tab this error came up:

As you can see, Readyboost says I'm not plugged into an USB 2.0 Port, my drivers tell me I have USB 2.0 installed. This error occurs in all 3 of my ports.
Here are my specs:


Also, I used an iPhone cord to plug my iPod into the computer, if that makes any difference.
Hopefully someone will be able to help me out
Thanks in advance.

A:Readyboost Not Recognizing USB 2.0 Port

Bump + Double Post + More info
What the Event Viewer log says:


I guess Readyboost have something against my USB2 drivers or something

Read other 9 answers
RELEVANCY SCORE 52.4

I have an Emachines T1840 using XP. Unfortunately my sound stopped working and now niether does my usb ports. I went to the device manager and found a yellow exclamation on Avance AC97, this device cannot start code 10, so i tried unistalling rebooting and reinstalling then updating. It did not work. I then tried uninstalling it again as well as my usb controllers unplugged the wires going to the front usb ports as well as the card that connects to the phone jack ( I just did dont ask why) rebooted plugged then rebooted again. None of this worked. So finally I reformatted my hard drive. Now im here I'm guessing its a hardware problem. Any help would be greatly appreciated im broke recession and all that good stuff. Thanks in advace.
 

Read other answers
RELEVANCY SCORE 51.6

As soon as I bought the woreless mouse was working well but then without any message it is not being recognized any more. I tried to copy files from a remote Iomega hard disk and at the beginning of the paste it was working well but suddenly stopped there was a message about an error and when I tried to rebegun the task it is not possible any more. Appear that the device is being connected but nothing happens.From a video for other model it was said that I have to reset the computer but I did not find the way in the Spectre x 360 as it seems it is a new model and what was said did not work for my computer.Note that a pendrive is working well to read, copy and save files in the same USB port.Thank you for any help.

Read other answers
RELEVANCY SCORE 51.6

I reinstalled my windows xp onto a new hard drive. It will recognize my keyboard and mouse, but when I plug my dell keyboard and my logitech wirless mouse into the usb ports it will not recognize them and come to the hardware update wizard. Also if I switch the mouse and keyboard that does work to a different USB port they will stop working. Im not to sure if it is the USB driver its self that is not working or something else.
 

A:USB Port not Recognizing mouse and keyboard

Read other 6 answers
RELEVANCY SCORE 51.6

I don't have an sd card reader on my notebook but have used a usb card adaptor on it and it worked. I had to do a complete recovery, updates, and reload browsers and so on. HP spent hours helping me get the computer back to its normal running self... yet this issue remains and cant find what I need to make the usb-SD card reader work. Yes the usb port works as I use it for other things.  Not sure what I'm missing.

A:Laptop not recognizing SD card in the usb port

Hi, Your machine DOES have card reader. Its specs:        http://support.hp.com/au-en/document/c04420347 which shows: External ports:    Multi-format digital media card reader for Secure Digital cards2 SuperSpeed USB 3.01 Universal Serial Bus (USB) 2.01 HDMI1 RJ-45 (LAN)1 Headphone-out/microphone-in combo jackIts location:         All you need: download Realtek Card Reader Driver and install to your computer.      http://ftp.hp.com/pub/softpaq/sp66501-67000/sp66959.exe For your question: do all USB ports work ? Regards.

Read other 1 answers
RELEVANCY SCORE 51.6

the title pretty much says it all. when i boot into win 8 or ubuntu, it recognizes them and they work fine, no driver needed. The instructions even say that no driver is needed. Im mainly perplexed as to why it will recognize them in 8 and ubuntu, but not 7

A:added syba 4 port usb 3.0, win 7 not recognizing

Hi Welcome to Seven Forums .... What is the Model Number ? ... Though some models do not need a Driver they have a Firmware Update ..
Have you Posted on the SYBAUSA Forum? ...

Read other 3 answers
RELEVANCY SCORE 51.6

I've got a printer that's hooked up to the parallel port at the back of my computer, but the computer refuses to realize that it's there. What is the cause of this?
 

A:Parallel port not recognizing printer

Could be a number of things:
1. Parallel is disabled in CMOS
2. Device Manager has an error with Parallel Port
3. Your Printer Drivers are corrupt, or partially loaded
4. You have a Virus/Trojan
5. The Printer is off, or has malfunctioned
6. The Parallel cord or computer connection is faulty

Also what is the name and model number of your Printer?
What OS are you running?
And have you thought of updating to a newer USB? (they've been around for years now!)
 

Read other 1 answers
RELEVANCY SCORE 51.6

Hello,

I want to know how to recognize a device on serial port. I know there are many libraries to read data from serial port as a stream of bytes but how can we RECOGNIZE a set of specific devices? Is there something to do with device?

Please reply as soon as possible, its urgent.
Thanks and Regards,
Vicky
 

A:Recognizing a device on serial port

Read other 6 answers
RELEVANCY SCORE 51.6

Hello,

We would like to get our Panini Vision X check scanner working in XP mode inside Windows 7. Unfortunately as I begin the installation for the check scanner in XP mode I get the error in picture #1. The error is that a USB 2.0 port is not found so the installation will not continue. Obviously I have a usb 2.0 port on my computer but XP mode is not recognizing it.

The device manager in XP mode is picture #2. And finally the device manager in Windows 7 is picture #3.

Pictures attached.

I have downloaded and installed all the current updates for XP mode from the MSFT site.

Does anyone have any suggestions?
 

A:Windows 7 with XP mode not recognizing USB 2.0 port.

Read other 7 answers
RELEVANCY SCORE 51.2

Hi, I have an issue with the display port of a HP Elitebook G3 with Product ID L3C64AVIt does not recognize in anyway with a HP ZR2740w 27 inch screen. I have upgraded video drivers on laptop. Tried to find drivers for the display for Windows 10 Enterprise ( 64 bit ) with no results.The screen is ok since it works with an old laptop model HP Elitebook Folio 9470m and display port and Windows 7 Enterprise 32 bit Note that the screen only has a HDMI connection and display cable.   The only result I was able to get is a quick image of the screen for 2 seconds. When checking screensettings in Windows 10, it does not get recognized at all. Any other solutions to this that can be helpful? 

Read other answers
RELEVANCY SCORE 51.2

I am not sure if this is hardware or software issue.
 
One of my USB drive is not recognizing my Western Digital external hard drive.
 
I have to plug the external drive cable into the other side of my laptop in the combination SATA/USB socket.
 
The USB drive in question works with other things like headphones.
 
For example--today I plugged the drive cable into the uncooperative socket. The Unlocker for the WD drive showed briefly. Since the WD external drive is password protected and Unlocked drive opens first, asks for the password, then the file drive will open.  I put in the password into the Unlocker drive.  The Unlocker drive disappeared but the file drive, which should appear afterward failed to appear.  There was nothing in Windows Explorer on the left file tree showing the WD drive was even present, although it was plugged in.
 
Then I plugged the WD external drive cable into the other socket and it worked normally.
 
Suggestions for fixing this appreciated. 
 
specs:
Win 7 Pro 64-bit
Sony Vaio
Dual Boot configuration with Linux on the other partition.
The internal HDD has 500 GB total split between the two OS's.
RAM - 6 GB
CPU - Intel Core i7 Q740 1.73 GHz
Let me know if anymore specs are needed.

A:USB Port not recognizing external Hard drive

Changed title to "USB port" from "USB drive", the drive connects to the USB port/connector.
 
Louis

Read other 1 answers
RELEVANCY SCORE 51.2

Hello,

I want to know how to recognize a device on serial port. I know there are many libraries to read data from serial port as a stream of bytes but how can we RECOGNIZE a set of specific devices? Is there something to do with device? How can we access device information from within the device attached with serial/parallel port.

Please reply as soon as possible, its urgent.
Thanks and Regards,
Vicky
 

A:Recognizing a device on serial/parallel port

Read other 10 answers
RELEVANCY SCORE 50.8

I have a D-link WBR-2310 wireless router connected to a ZyXEL P-600 series modem. Everything worked fine untill a couple days ago when I had a power surge; since then the wireless router won't show on the modem that the ethernet cable is plugged in, and I get no wireless or DSL internet. I called the internet service provider, and they told me to reset both the modem and the router, which I did and it worked fine for about an hour; then it didn't recognize the cable again. I thought maybe it was the ethernet cable itself so I bought a new one, and it didn't correct the problem. When I hook any of the cables up directly from the modem to the labtop or the pc the ethernet light comes on and I have internet connection again. Why doesn't my router recognize the cable? Thank you in advance for any advice!!!!!
 

A:Wireles router not recognizing ethernet cable in the WAN port

Why doesn't my router recognize the cable? Click to expand...

Your fine trouble shooting has isolated the problem to the router. It is defective. To try to prove me wrong leave it unplugged for a couple hours and then reset it to factory default settings. If still not working get another router.

By the way, pretty sure the ZyXEL P-600 is a modem/router combo. So if the only problem with the WBR-2310 is the WAN you could still use it as an ethernet switch and wireless access point per the following.

JohnWill's procedure (Aug. 30, 2008) for configuring a secondary router as a switch and, optionally, wireless access point follows.

Connecting two (or more) SOHO broadband routers together.

Note: The "primary" router can be an actual router, a software gateway like Microsoft Internet Connection Sharing, or a server connection that has the capability to supply more than one IP address using DHCP server capability. No changes are made to the primary "router" configuration.

Configure the IP address of the secondary router(s) to be in the same subnet as the primary router, but out of the range of the DHCP server in the primary router. For instance DHCP server addresses 192.168.0.2 through 192.168.0.100, I'd assign the secondary router 192.168.0.254 as it's IP address, 192.168.0.253 for another router, etc.

Note: Do this first, as you will have to reboot the computer to connect to the router again for the remaining changes.

Disable the DHC... Read more

Read other 1 answers
RELEVANCY SCORE 50.8

Hello,

I browsed the similar inquiries and solutions that concern this issue but I was unable to come to any resolution thus far.

Simply, my problem is that my computer no longer recognizes when an ethernet cable is attached to my computer. At my school there is a wireless network and a wired network and for the past year I've used the wired network because it is so much faster. Unfortunately, a few weeks ago, my computer stopped connecting to the wired network and I've noticed that it no longer even recognizes the plugged in cable. The lights do not power up on the side and under network properties the LAN network announces that there is a cable unplugged...

Like I said, I tried uninstalling and reinstalling the device driver in the manage devices window but this was unsuccessful in solving the issue. I'd appreciate any help or insight on this problem.

Thank you.
 

A:Wired LAN port stopped recognizing ethernet cables.

Read other 8 answers
RELEVANCY SCORE 50.8

I was having trouble with my pavilion burning up hard drives so I purchased a new one rather than replacing it with the same one HP always done. I purchased the hard drive from Best Buy and they installed it into my laptop. I then loaded the OS and applications and drivers using the original recovery disks provided by HP. After that I updated windows XP until all the updates were completed.
My problem is that the computer doesn't recognize usb mouses. I tried using my Razer Diamondback and it wouldn't recognize the hardware. After using the driver install disc provided with the mouse it still wouldn't work. I also attempted to download the lastest drivers directly from the website and that wouldn't work. I've had two other people who are much more computer literate than myself look at the computer and they couldn't figure out the problem either. It appears that it is only a problem with mice. I tried another mouse and it didn't work either. Also it recognized other usb 2.0 equipment just not mice. My friend also said that with the current XP installation service pack 2 it should automatically recognize most usb devices even with the driver disks. Any help into what could be causing this problem would be appreciated.
 

A:Laptop not recognizing mouse plugged into usb port after hd switch

Hi friend....

The most likely to happen in your case is that while repairing your system they reseted CMOS/BIOS or they updated it (it usually resets itself to defaults after update). In BIOS there is an option for usb keyboard and mouse support. Since you have a laptop this option could be by default disabled. Hopefully, getting into BIOS and enabling usb mouse support will do the job! This option is more likely to be found in the "integrated peripherals" section of your BIOS setup. Then exit and save. Usually to access BIOS you have to press DEL during the POST/startup screen. You may have came across the message "Press DEL to enter setup". I cannot know many details since BIOSes have differences between computers especially laptops. Of course go ahead on asking questions if you want me to be more specific on something.
 

Read other 1 answers
RELEVANCY SCORE 40

I am a beginner really and got this message after eliminating (hopefully) a prgram called Antivirus Action from my computer. I can't get on the internet because I keep getting this message. Any help would be greatly appreciated!
Mike
 

A:Firewall Settings HTTP (port 80) HTTPS port 443 FTP port 21 error message

Open Internet Explorer. Click Tools > Internet Options > Connections > Lan settings > Proxy server > Advanced. Delete the proxy server settings under HTTP, HTTPS (secure) and FTP (and Socks, if any). Then, under Proxy server, uncheck all boxed.

If running Firefox too, disable proxy server.
 

Read other 3 answers
RELEVANCY SCORE 40

Hello all. I was talking on skype and lost internet connectivity while talking. I received the error above (Firewall Settings HTTP (port 80) HTTPS port 443 FTP port 21 error message). I am running a laptop with windows XP and IE 7 and my antivirus is AVG and I also have Ad-Aware.

I'm not much of a computer person but I did some research online and tried a few things: I turned off the option on skype's advanced settings for it to listen on Port 80 and then rebooted. I also ran a command, 'netstat -aon' and did not find a listing of 1270.0.1:80/443 or 0.0.0.0.80/443 which seems to imply that nothing should be affecting port 80 or 443.

I also downloaded firefox and it cannot access the internet either. The only way I'm able to access the internet at the hotel I'm located at was to call the hotel's tech support and they had me go into the LAN settings of internet options and manually select port 8080.

Any more suggestions would be greatly appreciated!

Thanks,

Mike

A:Firewall Settings HTTP (port 80) HTTPS port 443 FTP port 21 error message

Some info on common ports used, http://www.chaminade.org/MIS/Articles/Fire...ortSecurity.htmI don't know much about connectivity problems...but it seems to me that...if you never had this problem before and your system connects properly outside of this hotel...the hotel/location may be the problem.Worth a read, IMO: http://en.kioskea.net/forum/affich-37752-c...on-the-internetLouis

Read other 4 answers
RELEVANCY SCORE 40

I have suddenly gotten this on my main computer. (Windows XP)
A previous techguy thread (expired) said to check my dns numbers with "jpconfig /all"
However, my computer will not allow me to run that program in safe mode.
Is it a bug issue... or will that program only run in full mode?
 

A:Firewall Settings HTTP (port 80) HTTPS port 443 FTP port 21 error message

Dear mulebit,
It actually is " ipconfig /all " i.e replace" j"with "i".Please go to command prompt under Start--> Programs-->accessories. No need for "safe mode" to carry out this task. Can you kindly provide details of your computer specifications? Are you using a third party firewall and if so which brand? What security software are you running?
 

Read other 3 answers
RELEVANCY SCORE 40

Hi

Please help i cannot connect to internet explorer!

I am getting the error message

Check the Firewall settings for HTTP port 80, HTTPs port 443 and FTP port 21.

My provider is tiscali and i have done the trouble shooting with them to no avail, Also tried to disable the Norton firewall functions and still didnt connect. My broadband connection is showing excellent between the router and pc with both wireless or with the lead.

I have Spybot and Ad-aware on my computer and norton internet security 2006.

Do i have to clear the Firewall settings for these ports or can anyone help me .... please!

Thanks a million

Angela
 

A:Firewall Settings HTTP (port 80) HTTPS port 443 FTP port 21 error message

Read other 6 answers
RELEVANCY SCORE 38.8

Well, this has me baffled. My Bell Internet Security Services Activation (I just installed it on a computer not used for some 4 or 5 months) popped up a window saying "Waiting for Internet connection"...and waiting and waiting. But my Netgear wireless connection to the router in the house indicates "very good" signal strength, which I thought meant I was connected. Obviously not!

I tried opening IE. "Internet Explorer cannot display the web page" (much as I expected)

Clicked the button which was showing on the IE cannot connect page "Diagnose connection problems" and followed the instructions. The final diagnostic is "Windows cannot connect to the internet using HTTP, HTTPS or FTP. This is probably caused by firewall settings on this computer. Check the firewall settings for the ports HTTP...etc." Where on this earth are they?!

I checked the Windows Firewall settings and found it "off (not recommended)" so I switched it on.

I re-ran the diagnostic on the IE page and nothing has changed.

My question is:

How do I check the settings for HTTP port (80) and HTTPS port (443) and FTP port (21)? Also what do I set them to?

Many thanks, in advance, for a solution to my problem!
 

A:Solved: Help! Settings for HTTP port (80), HTTPS port (443), FTP port (21)

So you just installed an Internet Security Suite which has a Firewall built-in and then you enabled XP' built-in firewall? I am baffled as to why you would do that. The new software you installed has to be blocking it somehow. I would search their website for known issues.
http://www.securityservices.sympatico.ca/ssp.do?lang=en

Or just uninstall it and use something different.
 

Read other 3 answers
RELEVANCY SCORE 38.8

Hi,

I saw this problem listed, but My issue is a bit different and the previous solution didn't work for me.

Please forgive me if any of my posts offend, as I am new to this site. I don't intend to be rude, but my ignorace may anger some. Also forgive the length of the post, I wish to be thorough as to avoid getting possible solutions that I have already tried or are not relavent.

I recently had some repairs done on my computer which involved reformatting my hard drive and when I got it back started having trouble accessing some internet sites. Unlike the previous person's post with this issue i can still access the internet and 95% of sites, but a select (and seemingly random) few give the IE cannot access website error. When I run the networking Diagnostics for Windows XP get the following error:

Check the Firewall settings for the HTTP Port (80), HTTPS port (443), and FTP port (21)

The only firewalls I know of on my computer are Windows and my router (both of which I have disabled) i have also tried Firefox and it craps out at the same exact sites.

In addition to selected sites, some third party programs are having trouble accessing the internet. This includes Nortons Installer (I haven't been able to install my antivirus yet because of this error) and I haven't been abble to register Microsoft office after I installed because it cannot access the internet for ID Key Verification.

I have tried turning off all LAN proxy settings, and power ... Read more

A:Firewall settings for the HTTP Port (80), HTTPS port (443), and FTP port (21)

Read other 8 answers
RELEVANCY SCORE 34

Here is my situation,
I own a Lattitude E7450, and needed to connected two displays to it. I went ahead and bought the Dell E-Port Plus Advanced Port Replicator with USB 3.0, since it has 2 DVI ports on the back. It shows it is compatible with my laptop.
I set up my dock, connected my laptop, as well as both external monitors. Only one monitor shows a duplicated desktop. When I go into the display settings, I cannot see any existence of another external display being connected.
All of my drivers are up to date, restarted laptop many times. Pretty bummed out.
Anyone have any solution/knowledge to this?

Read other answers
RELEVANCY SCORE 34

Hello! I am trying to forward a port so i can connect to my computer because i want to stream a radio station from computer to my phone.

I'm trying to forward port 88 on my Linksys WRT54G Version 6

I tried that but Boardwave audio streaming server still says it's not open!

Here are some pictures:

I'm using Windows XP Professional 32-Bit
Eset AntiVirus
and using Windows firewall
What am i doing wrong?
Thank you for your help!

Windows firewall screenie:

 

A:Solved: Port forwarding issues, Cannot forward port Please help! Linksys WRT54G

Read other 9 answers
RELEVANCY SCORE 34

Internet Service Personal Router Static IP MAC address of LAN Port or WAN Port

Hello friends,

I have purchased static IP from Local ISP Provider . Problem is that the tech support of local ISP provider is asking em

Which Port would you like to bind your Static IP

Also they ask me whats the MAC Address of Router
Pls see attached screenshot
As you can see Internet port - 74:44:01:94:E0:79
Whereas LAN Port has mac address - 74:44:01:94:E0:78

Which is routers mac address?

I have no idea.

I know we have two ports in router (mine is Netgear 300N Model)
1. WAN (Internet) Port
2. LAN Port
Could anyone really help in explaining me
1. Which one is routers mac address
2. Static ip should be binded to LAN or WAN Port

Pls guide Thank You

P.S. I intend to use DVR for CCTV for remote viewing later
 

A:Internet Service – Personal Router – Static IP – MAC address of LAN Port or WAN Port

I Don't know what your talking about directly but I'm willing to try. Can you explain a little better what the isp person is asking you? From the screenshot I know the bottom section is your local connection and the top part is your WAN connection. If that helps any.
 

Read other 2 answers
RELEVANCY SCORE 34

I recently started using the E-Port Plus Advanced Port Replicator with my Latitude E7450, but the headphones are not working. Sound comes from the laptop itself, even when the headphones are plugged into the dock or laptop. The headphones work with other devices, and the laptop works with the headphones when it is not docked.

Read other answers
RELEVANCY SCORE 34

Need some advice a quick as possible.

Windows XP Pro
ofc had a built in serial port go bad, it was hooked to a charicter generator (don't no how to spell charicter) for a tv channel.
Installed a Controller Card with two serail ports PCI Multi I/O Controller Card, it didn't show up in the device manager was having problems getting the driver to work. says to load driver first then put in the pci card. Anyway it wouldn't work. The port that was built in (that went bad was on com 1) When the new card didn't work I used a usb with a serial adaptor and it went in fine and showed up in the divice manager and it said it was working and it started out on com 3, I no each time you plug the adaptor into a different usb port it goes to a different com port. That isn't a problem cause it would stay in the same port. Anyway device manager said it was working we changed the charicter generator to com 3 but it wouldn't work. We no the cables are good. I then got a PCI Card with one serial port instead of two and installed it and it show right up in the device manager and said it was working and I for get what comport it was on but changed it to com 1. that port didn't work either. Finally brought in another windows xp computer and hooked everhthing to it and it works. The xp computer I brought in had no serial port so used the same usb to serial adaptor that we had used and it work the first time. Show up in the device manager just like on the first comp... Read more

Read other answers
RELEVANCY SCORE 34

Has anyone had any issues with the Precision 7510 only outputting through one DisplayPort output on the E-Port Plus Advanced Port Replicator?Our organization recently started to introduce Precision 7510 units to our employees, and we're finding that they will only output to one single monitor connected via DisplayPort through the E-Port Plus Advanced Port Replicators - even though there are two monitors connected into the two DisplayPort outputs on the E-Port Plus APR. If the monitors are connected via DVI, the Precision 7510 is able to output to both of them through the E-Port Plus APR. We have tried Precision M4800, Latitude E7450, and Latitude E7470 units in these E-Port Plus APR's with two monitors connected into the two DisplayPort outputs - and they all work correctly.The Precision 7510 units have the NVIDIA Quadro M1000M video cards, and the E-Port Plus APR's are connected to either a pair of P2417 monitors or a pair of U2414 monitors.

Read other answers
RELEVANCY SCORE 34

1. I would like to change my COM 1 TO COM 3.
Can this be done in the CMOS? or is there a simplier yet effective way that it can be done?

I need your help as soon as possible.

[Edited by Jsimon on 08-16-2001 at 12:13 PM]
 

A:How Do I change Com.port 1 to Com.port 3? My modem is silent. Dual booting problem

What do you mean by changing COM1 to COM3? Do you want to move a device? Reassign IRQs? Physically pick one up off the motherboard and move it?

Your modem sound is usually configured in two places. One is in the Control Panel, and the other is in the Dial-up Networking settings. Adjust the volume there.

Are you running Windows 2000 and Windows 98 on separate paritions (drive letters)? If so, you'll need to use special software to convert the FAT32 file system to NTFS. I believe Parition Magic will allow this without data loss. However, I would never make such a large system change without first backing up data. There is always the chance that everything could get wiped out.
 

Read other 1 answers
RELEVANCY SCORE 34

I contacted Lenovo support today and got NO help in answering my question on this T470 Thinkpad. Is the T470 able to support two external monitors at the same time (one) using the HDMI port, (one) using the USB-c port (connected VIA an HDMI adapter lets say) to two 32" LGMA68HY-P 60HZ ISP LED's ( max res 1920 x 1080) that ARENOT 4K displays!!  Man it was like pulling teeth, upside down, in the dark, getting astraight answer from tech support on the issue. It looks like my Pro Dock will be useless in this application. As soon as I plugged in a VGA monitor the HDMI port died. HELP!!

Read other answers
RELEVANCY SCORE 34

hi,

Recently i've noticed that port 50 000 is blocked, and bitcomet says it is blocked from using this for listening. Port 50 000 used to be open, and i even forwarded it to my router.

Currently i have no firewalls running, not even the windows firewall. I also have no anti-virus running. I've checked the port forwarding settings on my routers admin page and they appear correct. Does anyone have any ideas how i could unblock this port? Thanks. I am running windows xp home.
 

A:can't unblock port 50000 - needed as listen port for bitcomet

You may not get a whole lot of help here. Please read the TSG rules for the reason.
 

Read other 2 answers
RELEVANCY SCORE 34

CDMA software requires a COM port to communicate with a cell phone. I'm using HW Virtual Serial Port v3.1.2 (single port, standalone install).

I have a separate modem and router. My Win8.1 PC is hardwired to the modem. Windows firewall is off. Windows Defender is off. Motorola Mobile Drivers Installation 5.9.0 is installed (directly from Moto's website for my phone although Win8 is not listed just Win7. I did not install in Win7 compatibility mode.). My Motorola Droid Razr HD is running stock 4.1.1 ROM. It is booted into BP Tools. WiFi is off. USB Debugging is on. It's connected as MTP (media device). Stay awake is on. Modem, PC, & phone have been rebooted. There are no errors in Device Manager for the Motorola USB Networking Driver.

In IP config, the IPv4 address for the Motorola USB Networking Driver is 192.168.137.1. In HW Virtual Serial Port under Settings tab, I unchecked NVT Enabled. On the Virtual Serial Port tab, I selected Port Name=COM10, IP Address=192.168.137.2, and Port=11008. When I select Create COM, COM10 is created and I can see it in Device Manager but I get a LAN status error (in HW Virtual Serial Port app). So something is not right. In Network & Sharing Center, I see it's an unidentified public network with no internet access (IPv4).

I'm at a loss on how to fix this. Anyone know what I'm missing? Thank you in advance for the help.

Read other answers
RELEVANCY SCORE 34

i have a router/modem, Thomson ST536 and a router, Netgear WNR 1000. i have a static ip address already and port forward for both router with instructions from portforward.com. yet, when i check if the ports are open using simple port forwarding, only the tcp port is opened. the udp port remains closes. is there something else i must do to open the udp port?
 

A:problem with port forwarding. tcp port gets opened but udp remains closed.

bumpz
 

Read other 1 answers
RELEVANCY SCORE 34

My laptop had headphones plugged in because I was watching a film, but while I was in another room, my laptop was knocked onto the floor (around 1.5-2 ft drop) landing on the headphones jack, the wire is fine, but the ports completely broken, I can see cracks and its loose and everything

The laptop has Realtek HD audio manager, and in my experience of this program on other desktops I've had, I was able to change what port does what.

My laptop only has a headphones port and a mic port, and I would like to see if I can switch the mic port to be the headphones port because I never use an external mic, however in Realteks audio manager I can't find out how to do this. In pictures I've seen on the internet there is a "Device Advanced Settings" button (as seen in this picture http://www.vistax64.com/attachments...ealtek-hd-audio-driver-version-hd_manager.jpg) but my program doesn't have this.

Do I need to download a newer version of the software? or is it just not possible to change my mic port to be my headphone port? I dont mind if I have to use third party software, I just want it to tide me over till I can get it sent away.

Thanks for suggestions, greatly appretiated
 

A:Realtek HD audio manager, change a mic port to a headphones port?

I doubt very much if this will be possible. The mic and headphone ports are wired directly to the Audio section of the motherboard, there connections cannot be altered.

Your best bet is to get the damaged port repaired.
 

Read other 13 answers
RELEVANCY SCORE 34

So I'm not exactly sure what information I need to share to resolve this issue or know how to fix it. I've been trying to open this port (7198), and no matter what I try it just won't open. I'm not exactly sure how to explain the problem, but the title pretty much says all. If there's any information I need to share please tell me.

Windows 7 Ultimate x64
ISP is CenturyLink
Screenshot by Lightshot
Screenshot by Lightshot

A:I port-forwarded, enabled DMZ, disabled firewall, and port is closed

Welcome to the forum. You covered the ip in the second shot are you using local lan or wan are you trying from outside the lan as you can connect while connected to local lan

Read other 1 answers
RELEVANCY SCORE 34

As mentioned in the title I have both pieces of hardware.  I also just purchased a third Dell U2414H LCD monitor.  I am trying to connect all 3 via display port.  However it seems that all I can do is 2 monitors?  When I try to daisychain them I got 2 monitors mirroring each other and one through HDMI off the laptop.

Is this a physical limitation of the replicator?  Is there a firmware update somewhere?

A:Dell Latitude E6520 & E-Port Plus 2 - Display port issue

The E6520 comes with Intel HD Graphics 3000.  The specs for that GPU are buried in the specs for the CPU itself, but if you go to ark.intel.com and look up your CPU, then scroll down to the graphics section and verify that it shows Intel HD Graphics 3000, you'll find that that GPU only supports 2 independent displays, which is why you see mirroring.  More recent Intel GPUs do indeed support 3 displays, but no Intel GPUs to my knowledge yet support 4.
If your E6520 has the NVIDIA discrete GPU, I can't find any information on NVIDIA's site about maximum number of supported displays, but based on your experience I would assume it's 2 unless indicated otherwise.

Read other 1 answers
RELEVANCY SCORE 34

I'm doing terabytes of data transferring for months on end, and I was wondering if new hardware allows you to use multiple connections between hardware to transfer data to portable backup disks quicker.

Think Azure with a 5GB fiber line to RAID mirroring bay with only a USB3.0 and an ESATA port (dual banding) on the bay.

Read other answers
RELEVANCY SCORE 34

I have dual monitors......my primary display monitor is a Chimei CMV223D
My secondary display monitor is an Acer AL1916W.

My graphics card is an HD ATI Radeon 5800.

PROBLEM:

My primary display monitor which usually has a display resolution of 1680x1050 is currently stuck on 640x480 and in the property settings it won't let me change the resolution. The cable running from the Graphics card is an HDMI cable with a HDMI/DVI converter. I have also tried using the DVI port of the video card to the DVI port of the PC which comes up with same problem. Using a DVI/VGA converter and a VGA cable the VGA port on the monitor works fine!!! SOOOO long story short there is definitely something going on with the monitors DVI port.........

This randomly occurred overnight and is driving me insane to know what I need to fix. I have used different cables and to no such luck. My secondary monitor is just humming away just fine! But I really need my primary display.

I've uninstalled and reinstalled video drivers for the graphics card which is the Catalyst control centre suite and all monitor drivers appear to be up to date.

WHY oh why is my monitor locked at this resolution!!??? How to fix please help!!!

A:DVI port on monitor is stuck res of 640x480 VGA port works fine

Never mind!!!!

SOLVED CHECK THIS!!!!!

Force DVI/HDMI resolutions and refresh rates

Read other 1 answers
RELEVANCY SCORE 34

Hello guys,

I am being more concerned since few days about daily suspicious network traffic in my network about the below.

Looks like UDP port 137 from my private IP contacting destination port 137 to a public IPs (one source to many public destinations). I investigated these traffic by taking into consideration about 50 + offenses and 80% scan results on these PCs didn't find anything suspicious. Rest 30% detected some PUP programs from registry and some adwares, which I believe are not that much suspicious. (Scanned by Malwarebytes and Super anti spyware)

Below is a syslog log I am posting for your reference captured by my SIEM tool sent by Firewall.

<164>%ASA-4-106023: Deny udp src Internal:172.28.169.167/137 dst External:114.80.174.240/137 by access-group "My_CSM_FW_ACL" [0xb292c4f, 0x412e8e2f]

This traffic is happening on a daily basis, and to avoid security issues we have to unnecessarily scan those machines. But is this really a suspicious traffic ? Could someone please help me on this, please. After a brief investigation, if I find something good, I can save a lot of waste work by colleagues sitting abroad scanning the machines.
 

A:Source Port UDP 137(Private) Destination Port UDP 137 (Public). Malware ?

Read other 9 answers
RELEVANCY SCORE 34

Hey Guys,

I have been messing around with Apache from (XAMPP) on my Windows computer. I know that it is not secure, but I am just testing it for right now (for fun).

I am behind a Linksys WRT54g router. I can easily access the apache server from internally (locally), and in order for me to be able to access it externally (external IP in address bar), I have to port forward in my router.

So, I port forwarded port 80 and everything worked fine. I just had a question about this.

Since most internet (HTTP) traffic is served through 80, and I just port forwarded 80 to one computer, how do the other computers on my network still have access to the net. Don't get me wrong, it's awesome that this works, but I would just like to know how. Theoretically, wouldn't all the traffic that is coming through 80 be routed to that one computer?

Can someone explain this to me?

Also, when people use Apache to host sites, do they usually keep the apache ServerName (in httpd.conf) at localhost, or do they change it to a different IP? I would imagine they would keep it at localhost, so what would be the reason for changing that to a different IP?

Thanks!
 

A:Question about port forwarding port 80 (for apache) and a couple other questions

Anyone have any ideas? Thanks.
 

Read other 1 answers
RELEVANCY SCORE 33.6

Hello,
I have trouble as described in the topic,
I have two most old laptop models, Dell Precision M6300 & Dell Latitude D630.
When laptops is docked to replicator potr dock stations D/APR (PR01X) or D/DOCK (PD01X) - bigger one model with DVD port,

headphone jack port not working under Windows 10 Pro x64 installed on both laptops.

On M6300 previously was installed Windows 7 Ultimate and on D630 was Windows 8.1.
On Dell  M6300 on Win 7 Ult. headphone jack port worked properly.
On Dell D630 on Win 8.1 I'm not sure due I do not used this on it (more years ago when it was on Win XP headphone jack port worked properly)
So when Ms start delivering updates do Win 10, I did it on doth laptops, everything on both models working fine, but only this headphone jack port in D/APR (PR01X) or D/DOCK (PD01X) wouldn't like to work when I'm dockind Dell M6300 (D630 I docked only
for test if on this one jack port will work or not) but not working too like on M6300.
So loks like drivers whih was made oryginally for Win Vista x64 ale which was workable for Windows 7 64b wouldn't like to work on Windows 10.
Maybe You have some tips what to do with this to press them to work?

Greets
PitPuma

Read other answers
RELEVANCY SCORE 33.6

so i opened my port 25565 (or so i thought) went to test to see if its open on multiple sites and....all of them say its closed.

A:router not passing port scan after opening port

Start the application you opened the port for and then test the port, it should report it as opened.

Read other 31 answers
RELEVANCY SCORE 33.6

Hi,

I run the Vulnerability scanner yesterday GFILanGuard Network Security Scanner and it shows that on port 81 there is a backdoor Asylum. But I do not know how to see which application is actually using that port. I have used the TCP view but it did not show any kind of application running on port 81, at the same time when i tenet the port 81 I observed that its responding and there is some activity going on that port

I have used another tool named Advance Admin tool and it shows the information as follows:

Port Protocol Description Possible Trojan

81 TCP HOST2 Name Server RemoConChubo
Can you please help me how I can be sure what is actually going on this port. I mean the exact application which is listening on this port.
 

A:Asylum port 81.How to check which application is running on a port

You may want to try Port Explorer, it will identify which program is using the port:

http://www.diamondcs.com.au/portexplorer/
 

Read other 1 answers
RELEVANCY SCORE 33.6

I'm looking for two drivers, and have run into a bit os a wall on the Lenovo driver website. - PCI Simple Communicator Port- PCI Serial Port Computer: Thinkcenter M58 8910 ARU.   Windows 7, 64 bit. I dropped a new hard drive and a PCI card into this machine, and everything looks good except that the PCI card is not recognized.  I see similar posts here, but none with solutions that work for my exact situation.  I'm not a tech guru, just a semi-educated user.  8^)  Any help is greatly appreciated! Thanks, 

Read other answers
RELEVANCY SCORE 33.6

Hi,

I have been using an DSL Siemens speedstream 6520 router at home. I usually carry out some R&D by placing servers behind the router. I access the services on each of the servers from the ouside using port forwarding and it has been working fine for http, ftp, RDP, any user defined ports etc but in the case of port 25 SMTP its not working at all. I have checked the port on the local lan and I am able to telnet to that server but from the outside only on this port 25 I am not able to telnet. But If i were to change the SMTP port number from 25 to any other port like 24 or 26, I am able to telnet from the outide. Is there any way i can make SMTP port 25 to work and access the same from the outside.

Regards
Rajesh
 

A:SpeedStream 6520 DSL Router - Port forwarding for port 25

Is it possible that port 25 has been blocked by your ISP? This is a pretty common thing for ISP's to do as a SPAM prevention measure.

As you can see, there are quite a few ISP's blocking port 25 on this list.
 

Read other 1 answers
RELEVANCY SCORE 33.6

I'm looking for two drivers, and have run into a bit os a wall on the Lenovo driver website. - PCI Simple Communicator Port- PCI Serial Port Computer: Thinkcenter M58 8910 ARU.   Windows 7, 64 bit. I dropped a new hard drive and a PCI card into this machine, and everything looks good except that the PCI card is not recognized.  I see similar posts here, but none with solutions that work for my exact situation.  I'm not a tech guru, just a semi-educated user.  8^)  Any help is greatly appreciated! Thanks,Bob 













Solved!

Go to Solution.

A:PCI Simple Communicator Port and PCI Serial Port drivers for M58

I have the same problem with M58P and Windows 8.1_x64.- http://support.lenovo.com/br/pt/products/desktops-and-all-in-ones/thinkcentre-m-series-desktops/thin...On page no information about the PCI Serial Port driver.Any suggestion?

Read other 4 answers