Over 1 million tech questions and answers.

Touchpad malfunction on X250

Q: Touchpad malfunction on X250

Hi, I have an X250 with Windows 10. Recently my touchpad button got mechanically stuck, so I removed the touchpad, fiddled with the button until it would release when pressed, and I put everything back together. Unfortunately now the touchpad is not working as before. These are the symptoms: 1. Touchpad often freezes for several minutes, though I can use a USB mouse without any problems. It seems it freezes when CPU is hight, or if I click too many times the touchpad, or make too many gestures. For example if I try to move the cursor in circles, the touchpad freezes, along with the buttons and tracker. 2. Sometimes when I press left click, I get the scroll cursor as if I pressed the middle button. Was anyone confronted with this problem? My suspicion is that I might not have plugged in the connector cable properly. I have struggled to put the cable back in the touchpad but I didn't want to break it. Any ideas how to push that cable in the touchpad, or how I can know if it's properly connected? Thanks.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Touchpad malfunction on X250

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 60

As in topic. I've read something about upgrading X240 touchpad with one from X250 with buttons(bezel also, because mine was broken) after strong battle went well, I was happy owner of proper touchpad in my laptop. First start, buttons are working but trackpoint not. First thought - drivers. I went to System Update, downloaded new Synaptics driver, upgraded BIOS, changed nothing. Synaptics software stopped detecting trackpoint so I've removed all of their drivers, started again, still nothing. Next idea - maybe I've made a mistake when I was connecting keyboard and touchpad to motherboard. Disassembled, everything fine, I've tried to clean clear connectors, assembled, another start - nothing changed. So new drivers from SU again, reboot, and suprise - trackpoint was still dead and, to be worse, new drivers wasn't detecting again. Disassembly again, rechecked everything, still nothing. Old drivers found on some website about this upgrade - they weren't working at all, in mouse settings they crash every time I've changed to UltraNav tab. Drivers deleted, hardware check again, new drivers another time, newer BIOS and this thing isn't still working. I'm insanely mad, I've put a lot of hours trying to fix this and I have completely no idea what can be wrong. Do you have any idea what can I do now? Is there anything? Or maybe it's hardware failure and I need to install old touchpad to make this working again? Trackpoint buttons are working but only as single click, there is no way t... Read more

Read other answers
RELEVANCY SCORE 59.2

Hi all. I've seen this issue posted about many times before and can't get a hold of lenovo. When I try to use the "contact us - email" page the link doesn't work!  I have a x250 I purchased in 2015. It has been working great until recently. I usually use the trackpoint and have the touchpad disabled. Recently it just stops working and the only way I can get the mouse to function again is by using an external standard mouse. When I go to mouse settings it doesn't even recognize that I have a touchpad/trackpoint, even after installing updated ULTRANAV drivers. This also extends to the keyboard, some days the keyboard will not work at all. The only thing I can do is restart 100 times and cross my fingers it works one time. I've tried moving the mouse at the login screen, pressing firmly on the touchpad, etc. Nothing works aside from the off chance it cooperates after restarting.So, I have updated drivers numerous times for windows 10 and yet my trackpoint/touchpad still seem to rarely work. I am out of a warranty on this so I'm not sure what to do. My boyfriend is suggesting a factory reset, does anyone think that will work or have any other ideas? Thanks.

Read other answers
RELEVANCY SCORE 56.4

The left button on my touchpad developed a hard to describe malfunction. Turning on right-handed mode improved the functionality, but accidentally clicking the left button creates a complicated, frustrating situated which can usually only be resolved by restarting. Is there something in the settings or the registry which can disable the button until I get it fixed?

A:Touchpad Button Malfunction

I found an alternative answer. At Walgreens, I saw that mice were marked down from $11 to $6 and I bought the last one. It works surprisingly well for a $6 Walgreens mouse. I'm still curious about my initial question, although it's no longer urgent.

Read other 0 answers
RELEVANCY SCORE 55.6

I have a HP G6 Notebook, OS: Windows 7

My touch pad is functional as I can move the mouse, right and left click work just fine. However neither the two finger scroll nor single finger scroll work when I turn on my computer. I have to manually go to Control Panel, Hardware, Mouse and just open the Synaptic program and then it works. All my preferred settings are still checked and saved since the beginning of time and the preferred mouse selected, is the touch pad.

The touch pad retains all of it's scrolling capabilities until I turn off then turn my computer on again. I thought I could resolve some of the issue if I pinned Synaptics to my bottom tool bar, but Synaptics does not show when I turn on my computer either.

Any thoughts?
 

Read other answers
RELEVANCY SCORE 55.6

Dear Support Team, For a couple of days, the mouse on my HP EliteBook behaves erratically. It starts right away at the start of Windows when the log-in screen with the different profiles appears. I can neither click on any profile nor on the shut-down button. However, I can select a profile via the arrow-keys and the Enter button of my keyboard. Once Windows has loaded, the mouse acts normally. However, after a couple of minutes (or sometimes hours), the mouse starts to behave erratically again. Either the left-click is activated repeatedly, also turning the pointer into scroll mode, or neither left-click nor right-click are reacting at all. Funnily, I discovered how to "unfreeze" the mouse in the latter case: I simply need to start the Windows Task Manager via Ctrl+Alt+Del and the arrow-keys. Once the Task Manager is open, the mouse works normally again. This does not apply to the former phenomenon, though, when the left-click is activated repeatedly. I have consulted many forum entries and tried many remedies. My BIOS is up to date and I also updated the mouse driver via the Device Manager. This last attempt even made things worse. Since Windows installed the driver Synaptics TouchPad V7.0 (Synaptics Pointing Device - v15.0.24 03Jun10), I cannot use the "Tap and Drag" function by holding the second click on the touchpad any more, even though the option is activated in the aforementioned TouchPad V7.0 settings. This applies to all times, even when the mou... Read more

Read other answers
RELEVANCY SCORE 55.2

Several combination keys are not working ex. crtl+v, shift+v, etc. Touchpad right key only works when the left key is pressed in combination. What should I do?

Read other answers
RELEVANCY SCORE 55.2

Well since last time, my touchpad mouse randomly started malfunctioning. Instead of normal left clicking, when I click left click it instead drags stuff everywhere. For example: When i click on Google chrome to open it, it instead drags it around.

MY LEFT CLICK DRAGS INSTEAD OF CLICKS. So I tried reinstalling the driver.

Unfortunately, reinstalling the driver did not fix my problem. I have found out that it was a virus that caused my touchpad to drag instead of click. Using a program called MalwareBytes, I cleared a few trojans and keylogger. After about 10 minutes, the issue came back. I'm rescanning my laptop with the program and don't know what to do from here. Any further help is needed and thanks in advance!

These were the issues found in the first scan:

The second scan I did strangely didn't show any issues. I'm guessing problems remain the registry files, but MalwareBytes is supposed to detect things that are included in the reg.

A:Synaptics Touchpad malfunction: dragging instead of clicking.

Hello and welcome to TSF.

We want all our members to perform the steps outlined in the link given below, before posting for assistance. There's a sticky at the top of this forum, and
Quote:




Having problems with spyware and pop-ups? First Steps




a link at the top of each page.

Please follow our pre-posting process outlined below.

NEW INSTRUCTIONS - Read This Before Posting For Malware Removal Help - Tech Support Forum

After running through all the steps, you shall have a proper set of logs. Please post them in a new topic, as this one shall be closed.

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.

Please note that the Virus/Trojan/Spyware Help forum is extremely busy, and it may take a while to receive a reply.

Read other 1 answers
RELEVANCY SCORE 55.2

My laptop (ACER Aspire 1640) is struggling. The symptoms are:

1) It started with the keyboard behaving oddly. First, random keys didn't work (mostly the s key).

2) Then, whilst booting, beeping sounds would prevent the booting process. However, I was still able to boot by using f12. Both these symptoms indicated that a key was being pressed (assuming the s key since this was usually the one behaving strangely). Therefore, I removed some keys and cleaned underneath. This didn't seem to make much difference.

3) More and more keys would stop working after booting. However, once the laptop has "warmed up", 10 minutes or so after it has been turned on, all keys are again working.

4) The touchpad has stopped working.

5) The ACPI reports battery power incorrectly. It indicates that there is only 50 minutes of power left when 100% charged. However, I have verified that there is actually 80 minutes. When the battery indicator reached around 5%, I let the computer run until the battery was drained. This draining took more than half an hour where it should have been a matter of minutes considering that the indicator said that only 5% was left.

6) The PCMCIA slot has stopped working.

7) The mobile phone that I connect to the laptop via a USB port is having trouble getting reasonable Internet speeds. I have tested the phone on another laptop with the same configuration and the same cable, and here speeds are as expected.

My assumption is that the laptop is not ... Read more

A:Laptop - keyboard, touchpad, pcmcia and usb malfunction

No solid ideas to offer you. I suggest that you experiment a bit.

Run on battery only (since it is capable of being fully charged).
Use external keyboard and mouse. Some laptops accept a ps2 y-connector so both can be used at the same time. Mine does not, as an example.
I have not tried USB connectivity for either the KB or the mouse. While battery is considered a stable power source, remove the battery and run off the adapter. This will check out the filter & regulator.

Yours symptoms are many. However, replaceable parts on a laptop are hard to do without professional help. Opening the case & looking for loose or pinched cables may not be worth the risk/hassle.
 

Read other 2 answers
RELEVANCY SCORE 54.4

Hi, I recently noticed that I have some sort of touchpad error on my laptop where I can't click on anything by tapping my finger on it, I have to use the button below it. I can still use my touchpad to scroll around and stuff, I just can't click on anything. I was wondering if there is anything at all I could do (maybe there's something I accidentely changed on the control panel) or if this is some type of malfunction beyond your scope..system information is shown below (I just copied like everything I didn't know what you wanted lol). thanks a ton!!!!

OS Name Microsoft? Windows Vista? Home Premium

Version 6.0.6000 Build 6000

Other OS Description Not Available

OS Manufacturer Microsoft Corporation

System Name NITIN-PC

System Manufacturer Hewlett-Packard

System Model Presario V6000 (GA462UA#ABA)

System Type X86-based PC

Processor AMD Athlon™ 64 X2 Dual-Core Processor TK-53, 1700 Mhz, 2 Core(s), 2 Logical Processor(s)

BIOS Version/Date: Hewlett-Packard F.3D, 22/11/2007

A:Laptop Touchpad Malfunction - Unable To "click" On Stuff

Hi nnn23. Welcome to BleepingComputer.

Have you had a look in Control Panel/Mouse/TouchPad settings? That's where they are in my Acer Home Premium laptop.

Cheers

Read other 5 answers
RELEVANCY SCORE 54.4

I upgraded my Acer Aspire 5672 from win xp to win7 hm prem 32bit. I realised that the keybd and touchpad fails to function when I have the battery unit installed, but they work fine as soon as I remove it. Before the upgrade, I run the microsoft upgrade advisor program and it did not flag the battery.
Secondly, I dual boot with ubuntu 12.04 and the keybd and touchpad works well in the ubuntu platform except that it receive very minimal charge. The laptop runs on the minimally charged battery for a short period.

A:Ace Aspire 5672 battery causes keybd and touchpad malfunction

Hi Koofah. Welcome to the forum.

Unfortunately, you are going to need to replace that battery. All batteries have a limited lifespan. When they will no longer charge fully they are finished.
And when they are dying a laptop can exhibit many strange behaviors.

The fact that everything works normally on power supply with the battery removed is proof positive.

Read other 1 answers
RELEVANCY SCORE 46

I recently purchased an HP ProBook 450 G3. I am using two passport compact 1 TB drives with my laptop's two USB 3.0 ports. In normal use there is no problem. However, when I copy a lot of data from one to the other (or from one to the laptop's internal drive) the drives keep disconnecting. I know this because first I will get a copying error saying either the source or the destination is missing. Then I will hear the "chime" that Windows makes when a USB device connects or disconnects. Then the autoplay window for the Passport drive will appear. It seems that it spontaneously disconnects and then reconnects. I can continue using it for a time afterward, but it always spontaneously disconnects at some point, always when I am doing large data transfers.

I wondered if I have a poor physical connection---the USB plugs seem a bit loose. I checked if there is any vibration or movement that could break the connection, but so far there is no evidence that anything is moving. The disconnection always happens when a lot of data is being transferred, while the drives are sitting completely still.

Any ideas how to debug this?

A:Hard drive malfunction? USB port malfunction? Or just normal?

This is a hard situation to diagnose from a distance IMO. "Loose" is somewhat subjective, and barring serious abuse the only kinds of usb connectors & ports I've ever seen fail mechanically are mini and micro USB2 types.

I'd be inclined to suspect the drives first, especially if they are from the same family and were produced around the same time (the "bad batch" phenomenon). Have you tried to reproduce the problem on other machines, or with different drives on your machine?

Read other 2 answers
RELEVANCY SCORE 45.2

i used comodo cleaner,,the wiper function,,what a mistake, all my shortcuts,, favorites, program access are disabled, all the desktop icons wont finish loading, and they dont work, cant use system restore either,, programs are still there in files , they wont load , all icons for programs will not appear , any ideas where to go to fix this, ?

A:shortcuts malfunction program access malfunction

did it give you the option to back up before wiping? if so you can use that, or try system restore in safe mode.

Read other 2 answers
RELEVANCY SCORE 37.2

Hello all, I have both model's (X250/X260) I would like to know if the LCD panels are interchangable? As in can I take a working X250's panel and install it on a X260 and have it work? Thank you all in advance.

Read other answers
RELEVANCY SCORE 36.8

Hello guys I recently bought a second hand X250 with an Intel 240gb SSD installed and I am planning to install also an M.2 SSD to install Linux.I have already installed Linux in another partition in the Intel, but in general I am not a big fan of grub and also I don't like the restriction of maximum 4 primary partitions per disk. I would prefer to keep the Windows drive 100% clean of any Linux staff.So, I'm planning to install my Linux in the M.2 drive (I have already cleaned my system disk of the Linux staff, grub etc) and I was wondering if choosing the boot up device from the bios is going to be an option, without grub or other boot loaders. I just want to leave the Intel as default boot device and when I want to boot up in Linux, I will choose to boot from the M.2 SSD.Will such a setup work in my Thinkpad?As far as the M.2 drive itself, a 120 gb is more than enough and I am planning to go for an ADATA. I have read a lot of negative reviews about the Transcend M.2s and I don't trust "random" manufacturers, like ZTC or KingDian. Is there any better option for me? Thank you very much for your time. I 'm looking forward to your replies. Cheers

Read other answers
RELEVANCY SCORE 36.8

Hello, I try to set 4k on LG 27UD68-W, but I am not successful. I have latest display drivers and latest bios. But still, I may set only FHD. I use mDP to HDMI cable which supports 4k - tried it with MCB. I have WIN10-64b installed (updated from WIN8). I will be thankful for any tips.

Read other answers
RELEVANCY SCORE 36.8

I've just received a new X250, maxed out, and I'm really unhappy. Within a few minutes of booting it, I was seeing red and blue horizontal lines on the screen. I hoped these would be fixed by updates, but regardless of the driver, they are still there. To add insult to injury, the ports on the left hand side of the laptop do not line up with the casing. The USB port can be used, but the Display Port is seriously rubbing. The VGA connector is unusable. I'd hoped I'd have the laptop a week before I started a new job, and now it looks like I will be a week later. Does anyone know how I best approach Lenovo for a replacement under the Sale of Goods Act? I really don't want it to be repaired - this is a bad machine.

A:Really disappointed in new X250

Sorry to hear about the issues with your new X250. That must be very frustrating. According to Lenovo, returns should be easy providing you do it within 14 days.
 
I appreciate you may not receive the replacement before you start your new job. You might want to ask Lenovo if they have a similarly configured X250 in stock that they could send you instead of waiting for the replacement to come from China.
 
Added: Lenovo.com Return Policy *Enjoy free returns for the holiday. Purchases made between 11/5/15 and 12/..."

Read other 3 answers
RELEVANCY SCORE 36.8

My second X250 came in with a 16GB SanDisk SSD in addition to a 500GB HDD. Reading through the forum, a post mentioned that this 16GB SSD is placed in the position of the smart card reader. The mannual says this is a 3rd NGFF adapter. I am wondering if this 16GB SSD can be upgraded with a m.2 2242 32GB SSD module (or other types). I opened the back cover, lifted the internal battery, then lifted the shining metal cover a little and I don't see a memory module and port under it. I have installed Linux Ubuntu 16.04 LTS on to this 16GB SSD; the Ubuntu install runs well except that only 1.5GB space left. I am trying to see if there is a way to replace this 16GB SSD with a larger size module. Using the m.2 port next to the WiFi card is my last resort. I need advice before taking more parts apart. Thank you. 

Read other answers
RELEVANCY SCORE 36.8

Hello!  I have an x250 with a 2.5" SSD hard drive with Windows 10 installed. I would like to install a second m.2 or mSata SSD and install Linux to have a dual-boot system.  Is this possible with the X250? If so what kind of hard drive do I need to install in the second harddrive slot, and what is the limit on capacity? (Ideally I'd be looking for a 500gb ssd)  Thanks for your help!   -GZ    Lenovo Thinkpad X250 Intel i5-5300U Intel HD Graphics 55008 GB RAM

Read other answers
RELEVANCY SCORE 36.8

I have 3 company X250's, i know they have a 16GB mSATA SSD. I throw in some new 256GB SSD's to replaced the standard HHD. Is the only way to reimage those new SSD's to take out the 16GB mSATA SSD so that they wont fail? I was getting this error every time i tried "system_thread_exception_not_handled(ndis.sys)". Is there a way to disable that drive temporally in the BIOS? 

Read other answers
RELEVANCY SCORE 36.8

After using my x250 for about a year with occasional issues where it wouldn't detect when i connected the charger, it now completely refuses to boot or give any signal of life. Connecting the power cable doesn't even light up the power button. Tried a different charged with the same results.

Read other answers
RELEVANCY SCORE 36.8

I recently bought an X250, and immediately upon using it, found that the spacebar is not as responsive as all the older thinkpads I've had in the past. Specifically, when I type I press on the right side of the spacebar to create a space, but my usual amount of force is no longer responded to by the keyboard. If I push harder, it will respond, but that's annoying because it slows down my typing speed. If I press on the middle of the spacebar it works much better, and if I press it with my left thumb it works better, too. Does that mean I'm typing wrong all these years, or did I end up with a bad key?  I have depot service, so would Lenovo address this if I send it in? If I send this in, do I need to remove all the data on the machine? Would they replace the spacebar or the entire keyboard as I saw somewhere? How long would it take? Gotta say that the keyboard is much worse than the X230 that I am coming from. Thanks for any heads up!

A:X250 Spacebar

I too have this problem.What's the solution other than retraining your typing? 

Read other 5 answers
RELEVANCY SCORE 36.8

Good morning everyone. I installed on my x250 (using a free WWAN slot) M.2 SSD disk - ADATA Premier SP600 256GB M.2 SSD. First installation: April 2016. The disk worked great. After a "BIG windows10 update" the drive began to freeze and died on August 2016. The drive was replaced with a new one. On March 2017 the problem returned (in the new disk) - again began to freeze and died.From here my question arises - did I make a mistake somewhere? Do dear forumers who did similar installations on their x250 have similar problems? What can I do to prevent the problem on the third drive? During installation I did not mix anything in BIOS etc - just "plug ang play". I would be very grateful for your help.

Read other answers
RELEVANCY SCORE 36.8

I already had a SATA SSD in the third M.2 slot. The SSD went bad. Now I'm looking for a replacement. I saw Toshiba made a 2242 form factor NVMe SSD (RC100). Can I use an NVMe SSD in X250? Help much appreciated. Thank you.

Read other answers
RELEVANCY SCORE 36.8

Hi, I just bought a X250 today. I received it with Windows 7 Pro, and the first thing I did was upgrade it to Windows 10. After an hour of use, I noticed that the battery was draining really fast. I clicked in the battery icon on the system tray and noticed that it says: Battery 1: This battery is not available for useBattery 2: 40% (or whatever) I opened Device Manager and I see two devices listed under the "batteries" section, both of them called "Battery with Microsoft ACPI-compliant control method" (translating from Spanish, which is my system language, so it might not be exactly like this). I guess this means that the system indeed detects that there are two batteries, so it looks like a software problem. I right clicked on both of them and selected "uninstall", and then went to action > look for hardware changes, so that should refresh the driver. After doing that, the "battery 1: this battery is not available" message still appears. I also noticed that there was a power manager application from Lenovo which is not compatible with Windows 10. After upgrading, Windows notified me that this app had been removed and I don't see a W10 equivalent on the support downloads section of the Lenovo website. Any help would be appreciated. Thanks! Pau

A:X250 Battery 1 "is not available for use"

I also tried unplugging the second battery (the removable one). Immediately after unplugging it, the computer shuts down. If I turn it on without the second battery and plugged into the wall outlet, the icon in the lower right corner (system tray) says "no battery found"; however, on device manager I still can see one battery appearing. If I click on "properties" in device manager, it says that the device is working correctly, and there is no sign of any error log or crash report inside the battery properties in device manager.  I tried updating the BIOS and resetting BIOS to defaults, and it makes no difference. I also tried running Ubuntu from a USB stick ("try" option) and it only detects the second battery, not the integrated one.  I guess it must be a hardware problem.

Read other 6 answers
RELEVANCY SCORE 36.8

I just finished installing an EM7345 WWAN card in my X250 running Win 7 and when I launch Lenovo Mobile Broadband Activation I receive an error that the SIM cannot be read.  The support info for the error tells me that the SIM is not found. When I use netsh mbn sh read int=* from command prompt I also see that SIM is not inserted. I have verified SIM is correctly inserted.I have verified SIM works in another device. Any thoughts?  I have been scouring for guidance on this for quite a while now.

A:X250 SIM Not Recognized

HelloMake sure the wwan card is enabled in the BIOS Setup (Security -> I/O Port Access).

Read other 1 answers
RELEVANCY SCORE 36.8

I have purchase multiple xps 13 and inspiron 13 laptops and observe the same issues.  I tend to use the touch pad with my right hand's index finger, and click the touchpad button with my left hand's index finger.  It's a quick way to get things done.  Many in my organization do this, too and have been running into problems.
However, quite frequently (but not all the time) when I click the button with my left hand the cursor jumps to another location on the screen.  Frequently this is the lower-left corner of the screen, but sometimes it is the upper right, too. This causes different windows to come into focus, or it activates the start menu.  Really , really annoying, and it happens on both laptop models.  Our previous Lenovo Yoga 2 Pro and Acer laptops did not have this issue. 
I think this has to do with the touch pad thinking that the user has two fingers on the touch pad and moves the cursor thinking the finger jumped around the pad.  Otherwise the gestures and movement of the touchpad is fine. 
Is this a known issue to Dell?  It's really aggravating and other users in my organization are complaining as well.  I may need to return the lot (3 XPS 13, 5 Inspiron 13 machines ) and look at different hardware.  

Read other answers
RELEVANCY SCORE 36.8
A:notebook 3000 N500 touchpad doesnt work (touchpad funktioniert nicht)

Hi,  Today I bought this model and have the same problem. If anyone know the solution, please share it here. thx arghhhh!!!!  there, in a top right  corner of the laptop, is a sensor button. Just press it and touchpad becomes alive (it dosn't look like a button at all) ADMIN EDIT - There is now an official tip which explains the N500 trackpoint function and the button to enable / disable it.Message Edited by Mark_Lenovo on 03-04-2009 01:28 PM

Read other 5 answers
RELEVANCY SCORE 36.8

Hello,

I have a Dell Latitude D630 laptop that has issues. Sometimes the touchpad works, and sometimes it doesn't. I've noticed when it doesn't work, the icon in the tray has disappeared or never booted up to begin with. Sometimes it boots up and sometimes it just doesn't even boot up to the tray at all. And at other times, it does.
(Along with this, maybe it's just a coincidence, but I've been working on this for days and days but when the touchpad doesn't work, the keyboard acts up too!) This might have nothing to do with it at all.

I've done a complete reformat of the hard drive, installed Win XP Professional, reinstalled drivers over and over. Been to the Dell website and have all the newest drivers.
When I reinstall the touchpad drivers, it does work once again, but this seems to be short lived.
The laptop is 4 years old...seems strong otherwise, can handle multiple tasks fairly well, has a dual core installed.
I can't figure it out.
Can anyone help?

Thank you!!
Pam
 

A:Solved: Dell Latitude D630 touchpad icon in tray disappears, so does touchpad!

Read other 16 answers
RELEVANCY SCORE 36.4

I use mouse usually so didn't realize this problem until I take the laptop out for work today. I have uninstalled and installed the latest touchpad driver, but it did not work. I cannot even see the touchpad device in the "device manager" or a touchpad option in "setting" Below are two screenshots. Any idea what's going on and how I should solve this problem? Many thanks!!!!

Read other answers
RELEVANCY SCORE 36.4

We just got a Dell XPS-15z, and, we have questions about scrolling on the Cypress touchpad using the Cypress drivers.

When scrolling down (either one finger or 2 fingers), when you hit the bottom of the touchpad, is there any way for the scrolling to continue without your having to lift your finger(s) back to the top of the touchpad? On other Dell laptops, I have Chiral motion, or the scrolling continues so long as your finger is at the bottom of the touchpad? I tried enabling the "Continued Motion" option just in case that was what did it, but that did not seem to work.

Which brings up another question re what "Continued Motion" does.

Also, is there any manual/help document for this driver either on the internet, or in the software itself?

I looked on the forum and on the internet, and couldn't find any answers.

TIA.
 

Read other answers
RELEVANCY SCORE 36.4

Hello, I tried to upgrade to windows 8 and found that the touchpad became super sensitive and jumpy. Reading online I found a firmware that claimed to fix the issue and found it on HPs Support site. Mid install, it reported that it failed and forced a reboot on the laptop. When it was back up and running I found that the touchpad no longer worked. Its exactly the same issue as in these links: http://h30434.www3.hp.com/t5/Notebook-Software-and-How-To-Questions/Touchpad-Not-Working-After-Faile... http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/Touchpad-Firmware-Failed/td-p/23... I've tried to reflash and to get new drivers but they are not able to go through. The drivers install but don't fix anything. The flashing will quit saying I need drivers first even though I have them.  I've even reformated and put the factory windows 7 image back on but it still will not work. The solutions posted in the above links didnt work for me.  Does anyone have any idea on how I can fix this?

Read other answers
RELEVANCY SCORE 36.4

Haven't updated your laptop's trackpad driver lately? Then you may well want to consider doing so, at least if your laptop is equipped with a Synaptics trackpad. As a user on the Hardware Zone forums discovered, the latest Synaptics driver seems to enable multitouch gestures on older laptops that didn't previously support them, including two-finger scrolling, and three-finger click. What's more, while the drivers themselves come from HP, they should work just fine on other laptops with a Synaptics trackpad. Hit up the link below to try it out for yourself.
Source: Synaptics driver enables multitouch gestures on older trackpads -- Engadget

p.s. working on my P7805u perfectly.

Download directly from HP: ftp://ftp.hp.com/pub/softpaq/sp47501-48000/sp47815.exe

Read other answers
RELEVANCY SCORE 36.4

I've had a x250 for a year and recently has developed an issue where the screen will display black/purple/green blocks(Look at pictures for reference) and I'll be forced to force shutdown my laptop and power it up again to resolve the issue. Could someone please enlighten me on the cause!


























20170208_135359.jpg ?4718 KB

A:x250 display problem

Welcome to the forum!
 
 
Looks like a defective panel to me.  Was any driver update done lately? What happens if you press with your fingers on the borders of the display? (Try putting some pressure in different places).
 
-
 

Read other 2 answers
RELEVANCY SCORE 36.4

Lenovo, is it possible to put the X250 Trackpad in the X240, replacing the Clickpad with one that has real buttons? The Clickpad absolutely sucks and I can't believe I now own the one generation of ThinkPads that have this abomination. I'd like to replace it without having to buy a whole new laptop.










Solved!
Go to Solution.

A:X250 Trackpad in an X240?

Hello XThinkpadUser, I am very sorry, but I advice You to forget this idea. There are most likely going to be some imcopatibilities in BIOS, and if not so, then some differences with the shape of the keyboard / trackpad connector. Plus you would need to replace the whole keyboard bezel. My opinion is based on the same glitch with old X200 and X201 - many people asked if X200 can be backwards upgraded with touchpad - it can be definitely not (afaik). Nobody can mark your question as impossible until first X250's arrive, but in your case I would hurry selling your X240 unit. Sooner you do it, you will get more paid for it... (believe me, you have my best sympathy, but I am in much more huge trap - what shall I my X220 change for?? :-) ) Regards,skrble

Read other 9 answers
RELEVANCY SCORE 36.4

I got this X250 (Product Number 20CMOOE5US) last week and it has this weired power issue. When pressed the Power button, it flashed the green light 3 times and nothing happened. Unpluged the AC adapter and removed the external battery; opened the back cover and disconnected the internal battery and the coin battery. Connected AC adapter and pressed the emergency reset button on the back for several seconds; turned off the AC adapter power for a couple of seconds and then turned it on again. Without press the power button, the laptop came back alive with a boot screen message saying the CMOS checksum was bad and time/date need to be set. Pressed F1 key and updated time/date and then F10 key and RETURN. The laptop loaded Windows 10 with no other problem. While it is still powered on, I reconnected the internal battery and the coin battery, put the back cover on and inserted the external battery. Surfing the Internet, running Windows 10 updates and virus scan, including write this post; all without any problem, except the following: The laptop goes back to the initial dead state again if I use the mouse to click on the "Shut down" power off option. I will need to repeat everything from the beginning - disconnect all power source (AC adapter, external and internal batterys as well as the CMOS coin battery) and use only AC adapter power with the emergency reset button, ..., get into BIOS page to update time/date, ... This doesn't look like a motherboa... Read more

A:X250 Power Issue

Look in the windows event log to see if a device is failing to shut down completely.  Sometimes they throw a message.  Try an Ubuntu DVD and see if shutdown followed br restart works there.  It may be the motherboard power circuitry.

Read other 3 answers
RELEVANCY SCORE 36.4

Thinkpad x250, less than two years old. Running Windows 10. Yesterday afternoon after having my laptop plugged in for about a half an hour, I realised that it hadn't increased in charge at all from 9%. I clicked to open the charging icon on the taskbar and it said Battery 1 was at 12% and charging, while Battery 2 was at 5% and not charging. I unplugged, turned my cable and plugged it back in - same thing. I took the battery out, waited a moment, put it back in. No dice. I repeated this step a couple times. I left it to charge overnight, hoping that might resolve something but no luck. When I woke up this morning, it was now at 8%, with Battery 1 at 10% and charging while Battery 2 remained at 5% without charging. My boyfriend has the same charger, so I switched to his to experiment. Battery 2 started to "charge" while Battery 1 stopped. Neither has gained any charge, however. When I switched back to my charging cable, Battery 2 continues to be the one to "charge" and now the battery says it's at 7%. I uninstalled the drivers, took the battery out for a minute and rebooted, reinstalled the drivers, and there's been no change. I went into Lenovo Settings and tried to run the Reset Gauge, but it failed as the battery would not charge. Additionally, none of the thresholds are on. As it is being powered by the cable, and not shutting down, I know that it might be alright as long as I keep it plugged in perpetually, but I'm concerned that once th... Read more

Read other answers
RELEVANCY SCORE 36.4

HiI have a Lenovo X250.It trys to repair windows 10, but fails.Then I did made a Boot-USB with Windows 10, but when i reach the place, where to chose where to install, it only shows Disc0, but with no space to install.I want a total clean install from USB.In bios, I can see a harddrive, but does the computer have a SSD and Harddisc too?What is wrong? 

Read other answers
RELEVANCY SCORE 36.4

I have X250 (Windows 7) with HD TN (non IPS) display and would ike to upgrade it to FHD IPS.Please advice me if it worth to do as I dodn't  have expiriene of using FHD resolution on 12,5'' screen size.How text is readable?How text is sharp? in comparison to HD TN that I have at this moment.Will I loose warranty if I replace te screen in local PC repair service?Thank you for your time and  advice.











Solved!
Go to Solution.

A:Upgrade HD TN to FHD IPS for X250 (Windows 7). Adv...

Hello,
 
I'm not a Lenovo employee, so cannot answer some of your questions exactly, but let me try to answer as a fellow X250 user who went from an HD IPS (1366768) to FHD IPS (19201080) panel about nine hours ago.
 

When the display panel was switched out, the display scaling changed from 100% to 125%.  Plenty of applications handle the new scaling just fine, but some of older ones looked blurry as a result of how fonts are scaled up in them.  Switching to 100% display scaling solved this and the apps now display crisp, if somewhat small, text.
Text is much sharper on the FHD display than the HD display, which is sort of expected given the new screen has nearly twice as many pixels as the old one.  Both screens I had were IPS, though, so I cannot make a direct comparison between TN and IPS.
I would suggest getting the screen installed by a Lenovo authorized service center.  According to this page, the contact information for Lenovo Ireland Sales and Customer Support is+353(01) 6535 568, and hours are from Monday - Friday 9am - 5.30pm GMT

One thing I've noticed is that the new screen seems a lot brighter than the old one.  Again, not sure how this compares with TN versus IPS screens, but just something to be aware of.
 
Regards,
 
Aryeh Goretsky
 

Read other 6 answers
RELEVANCY SCORE 36.4

My x250's CPU temperature approaches 90+ degrees when I try to watch youtube videos on Chrome/Firefox. I can hear the whiny fan speed up. I usually have the power setting at Maximum Performance in Power Manager. Is this the nature of core i ulv cpus?

A:X250 i7-5600u Heating Up

That shouldn't be normal. Propably, there is something wrong with the fan assembly or the thermal grease.

Read other 4 answers
RELEVANCY SCORE 36.4

Hello all,The built-in "Lenovo Update" agent program recommended a BIOS update v1.23 (it's a critical update), so I did. And then my system doesn't boot: it's hangs on the "Starting Windows" logo page (Windows 7 64 bit). So I am trying to rollback to the last working version v1.21. Confirmed that my machine is type 20CL, went here, go the bootable CD, successfully went to the BIOS Update Utility, and then it said: "system program file is not correct for this system" ? The followings settings in BIOS were applied to try enable a rollback of BIOS but failed...??? * I am sure: - my download was correct- no issue on handling the ISO burning to CD- this has nothing to do with Windows or operating system* Any idea folks?I really really need my system back... Thanks.Angus 

Read other answers
RELEVANCY SCORE 36.4

Hello,Can you tell me how much of ram support the laptop PC x250 ref:20CLS79700 of lenovo and which are the frequencies supported.What is the spec of this memory ?Thanks

Read other answers
RELEVANCY SCORE 36.4

Sorry I've searched through the forum... Anyone know if I can upgrade the wireless network card for the x250? Looking for one with AC...  Thanks

Read other answers
RELEVANCY SCORE 36.4

Hello, I have a Lenovo ThinkPad X250 Laptop.Configuration is following: Processor: Intel Core i5-4300U Processor(i5-4300U) 1.90 GHz, Memory: 8GB, Operating System: Windows 7 Enterprise SP1 64-bit I trying to upgrade RAM with 16gb module. I updated bios with latest version (1.27) , i mounted 16gb ram, but it doesn't work. Laptop doesn't start, HD seems to start buf turns off after a few seconds. No problem reinstalling 8gb ram. Can you help me? I have to install other update?16gb ram is a Crucial DDR3L - 1600 SODIMM 1.35V CL11 (CT204864F160B) Thanks in advance. Lucia

Read other answers
RELEVANCY SCORE 36.4

Hello all,
 
I have both model's (X250/X260) I would like to know if the LCD panels are interchangable? As in can I take a working X250's panel and install it on a X260 and have it work?
 
Thank you all in advance.
 
Moderator edit: Added detail to Subject.

Read other answers