Over 1 million tech questions and answers.

Driver Detection Issue

Q: Driver Detection Issue

I just had to restart my computer after a system-wide lock-up, and after I booted back up, the OS refused to see my WIRED laser mouse! It's never done this before, and now, after restarting AGAIN, I find it STILL won't find it, or even my back-up mouse! Does anyone know why this is?

RELEVANCY SCORE 200
Preferred Solution: Driver Detection Issue

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Driver Detection Issue

Hello NFSRacer,

Unfortunately I have yet the need to use Safe Mode in Windows 8, so I am going to give you a link that gives instructions on how to...

How To Boot Into Safe Mode On Windows 8 (The Easy Way) - How-To Geek

I would like you to attempt to load Windows in Safe Mode to see if the mouse is recognized at that point.

Also, this is a USB mouse? Have you tried other USB ports?

Read other 6 answers
RELEVANCY SCORE 60

I am having difficulty with my ASUS SDRW-08D1S-U external optical drive. My computer is an ASUS UL30A notebook with Windows 7. The strange thing is that it was working initially, but now a few days later, it stopped working for some reason. If I go to My Computer, I can see my harddrives (C and D) listed, but not my optical drive. If I go to Control Panel, and click on Devices and Printers, I see my optical drive listed under Devices as SDRW-08D1S-U, with a small yellow triangle icon with an exclamation point on it. If I double click on it, and then click on the Hardware tab, it states at the bottom – “Device Status: Windows cannot load the device driver for this hardware. The driver may be corrupted or missing.” If I click on the Properties button, it basically says the same thing, with the addition of: (Code 39). I have tried updating the driver, and it states that I have the appropriate and latest driver. I have tried disabling and enabling driver. I have tried right clicking on the icon and Troubleshooting.

Finally, I tried uninstalling the driver. And then when I plugged the drive back in, it states that the “Device driver software was not successfully installed.”

I am using the supplied USB Y cable with both ends plugged in. I have tried it also with only one of the two ends plugged in, and also with regular non-Y configuration USB cables.

I will add that I never installed the original software on the CD that came with the drive. I was about to install it when ... Read more

A:Driver detection/loading issue with ASUS SDRW-08D1S-U external optical drive

No replies yet...I guess there is no easy fix for this... I'll probably put up the drive for sale and get something else...
 

Read other 3 answers
RELEVANCY SCORE 48

Not too long ago I saw a link in a thread that would anlayze the various drivers on a system and make suggestions as to which ones needed to be upgraded as well as the site to go for the upgrade. Does anyone know where I can find that site?

Thanks
 

A:Driver Detection

http://www.lavalys.com

Download and install Everest Home Edition, which is freeware. Reboot the system after installation, then run Everest and see what you learn.
 

Read other 3 answers
RELEVANCY SCORE 48

I went to the driver update page as I have in the past and this time it gave me an error of "Driver detection not available."  Please advise.

A:Driver Detection Not Available

Same thing has been happening for me on multiple systems starting at approximately 07:30, CST, and as recently as a few minutes ago.

Read other 9 answers
RELEVANCY SCORE 47.6

Hello Guys I need your help in my laptop Graphics error.I uninstalled my AMD graphics card recently from control panel.Now i am trying to install the drivers and i have downloaded my graphics card driver from www.amd.com .But when the drivers installing there is a error message coming that is "failed to load detection driver".Please Help Me.
My Laptop is HP Probook 445 G1.
 

A:AMD Graphics Driver Error "Failed To Load Detection Driver"

One more thing guys.My graphics convert into Standard VGA Graphics.
 

Read other 3 answers
RELEVANCY SCORE 47.6

Hi All,

I'm having a spot of bother with my Easycap capture card (DC60 STK1160). I recently returned to this having not used it for a long time and realised I had lost the installation disc/drivers (d'oh!)

I had to search for and download the drivers again off the internet but when I have installed them the PC (XP) doesn't seem to recognise that they are there (see screenshot). I think the drivers are correct and I think I have followed the normal proceedure for installing drivers correctly but I've come to a dead end.

Anyone out there with any experience of installing drivers for this capture card?

Thanks in advance.

Regards,

C h r e d g e.
 

Read other answers
RELEVANCY SCORE 47.6

Anyone on here know of any software that detects and identifies drivers that are conflicting with each other?
 

Read other answers
RELEVANCY SCORE 47.6

My friend purchased a refurbished HP pavillion from www.computergeeks.com. I am having the hardest time finding drivers for anything on it! It came wiped clean, no OS. I installed W2K, and got that up and running, but the video and audio drivers aren't installed.

Does anyone know of any websites I can go to that will show the harware on my PC and/or point me to the correct drivers for them? I went to www.driverhq.com, but I can't look at the entire program because my resolution can't be changed and I can't move it down to see all the options.

Help!
 

A:Website for driver detection?

http://www.hwinfo.com if you can't see the results, try running the DOS version. Then go get your drivers. www.driverguide.com
 

Read other 2 answers
RELEVANCY SCORE 47.6

So...
Having a small issue with my laptop. i looked all over the internet and alas i came up with nothing whatsoever.
I ordered my laptop off of microsoft website because they had a deal for students, this was about 3 years ago. 
The other day i was watching a stream on my laptop and it started making clicking noises and froze my computer, i restarted chrome and everything worked fine again.
then about a week later watching another stream, the clicking noises began again only this time it shut my computer off. so i turned it back on and this error came up(No boot device detected. strike F1 to retry boot Strike F2 to run setup utility or F5 to run onboard system diagnostics.) 
So naturally i clicked retry boot a couple million times but to no avail nothing worked.
So i ran my onboard diagnostics. and it came up with hard drive not connected. so i was like okay my hard drives fried. so i connected a different one... same error message
 
So now ive come here for solutions, ive never in my life resorted to posting online about a situation. but this is just insane. either the connection from my computer to my hard drive is fried, Both my hard drives are fried or something in the softwares messed up. 
All im asking for is a solution... Thanks.
~Var
 

A:Hardware/Non Detection issue

The hard drive is indeed toast -- if you post the model number (i.e., Inspiron N5110, 5521, etc.) someone can recommend a replacement drive.
If you did not prepare a set of recovery media when the system was new, you'll also need to contact Dell to purchase that now, as you'll need it to reload the operating system once you replace the faulty drive.

Read other 1 answers
RELEVANCY SCORE 47.6

Hi guys

I've a Macbook Pro with the Win7 build 7000 running on it. Everything works fine except the microphone detection of the Realtek HD adapter. the macbook pro only has 2 jacks. one for the headphones and the other should be the mic/line-in.

By plugging in the mic from my headset, the realtek audio manager just shows me an input device instead of the microphone.
The built-in mic from the macbook works fine, but I prefer using my headset for skype.

Is there any workaround to fix this issue? how can i "tell" the realtek audio manager, that the plugged device is a mic?

I already installed the lates realtek HD drivers (2.18) and tried to assign the mic/line-in manually over the registry (Realtek HD Changing Jack output reassignments ( FIX )), but nothing could solve this problem.

here are some screenshots which are describing the issue. yes it's a german installation :-)

many thanks

dumdidum

A:Realtek HD mic detection issue

Hi dumdidum and welcome to Se7en Forums

Referring to your first image, right-click on the BLUE socket and select Connector Retasking...

You should be able to set the appropriate option here.

Read other 4 answers
RELEVANCY SCORE 47.6

Hello,
 
Long story short, I had a malware infestation on my laptop.  I currently have run the latest versions of the following:
 
Avast - Full scan
MBAM - Full scan
adwCleaner
RogueKiller
Trend Micro Anti Threat
TDDS
 
Each one of these seemed to find things here and there, but I still have the problem. Combofix and aswMBR will not run due to "A device attached to the system is not functioning" error.
 
In Safe Mode Combofix will start to run but then I get a BSOD and reboot.  asw will come up but won't scan says "Error loading driver" when it starts then "Scan Error" when you try to run a scan. 
 
I have two particular URL's coming up that Avast is currently blocking:
www.babaloonx.com and www.colboltuz.com plus one URL that is just an IP.
 
Any help is appreciated!

Brian
 
 

A:Malicious URL Detection Issue

Read the guide here
http://www.bleepingcomputer.com/forums/topic34773.html
and create a topic here with logs
http://www.bleepingcomputer.com/forums/forum22.html
Good luck

Read other 1 answers
RELEVANCY SCORE 47.6

Hi, first post here for me.. After successfully installing the latest version of Java (6.0.260) and then running the detection tool, it keeps telling me it does not detect Java on my computer. I've tried rebooting after install, uninstalling and reinstalling, using the offline version and every troubleshooting tip listed after the non-detection message. I'm using IE10 with the 32-bit browser. Java used to run fine until lately. I'd appreciate any suggestions on other solutions. Everything I've tried has failed. Thanks!

A:Java detection issue

Hi welcome to Seven Forums,
Open Internet explorer,
Use Alt+TA or Gear symbol on the top right and Manage add-ons
Click on Show all add-ons on the left middle of you screen,
Then see if Java is Enabled.
http://windows.microsoft.com/en-us/internet-explorer/manage-add-ons#ie=ie-10-win-7
Also you might switch to Software rendering,
Alt+TO
Internet options/ Advanced/ Check the top box/ Apply and Okay.
http://www.sevenforums.com/tutorials/149063-internet-explorer-gpu-hardware-acceleration-turn-off.html

Read other 5 answers
RELEVANCY SCORE 47.6

Hi

I'm having problem finding the new HDD (additional one) in 'My Computer'. I connected an additional HDD into CPU and started my PC. After startup, it detected the new hard drive and installed (auto) and said 'Successfully installed' (in balloons). But now I don't see any icon for the new installed hard drive in 'my computer'. Then I shut down the pc, disconnected, then reconnected... did allover again. But the problem remains!

What might have gone wrong? Where's the problem! Please help me guys
 

Read other answers
RELEVANCY SCORE 47.2

Is there a free driver detection and back up program out there you all recommend? If no free ones, any programs like that youd recommend? Ive heard Drivermax but havent checked it out yet.
 

A:Driver detection/backup software

Read other 6 answers
RELEVANCY SCORE 46.8

To enable movie viewing on 55" LCD TV

This is a pain in the rear for me but it is the only way to get the HDMI audio recognized as a valid option in Audio Playback devices. (Video always works but the audio is says not connected)

To get the HDMI Audio detected, I have to....
First - On my TV I have to select the HDMI channel that is connected to my PC
Second - I have to un-plug and plug-in the HDMI cable. (I can hear the Windows 7 found hardware sound)
Third - Now I can select HDMI as my default audio device (everything works great)
I usually have to repeat this process any time the PC or TV gets shut off. I am worried about wearing out the HDMI port by plugging and un[lugging so often. This can't possibly be the way it is supposed to work.

This is not an intermittant issue - it is a matter of the ATI HDMI detecting the audio connection and is very repeatable and consistant. All drivers ATI and VIA audio are the latest to date as of today.

Maybe it is the Plug&Play component - TV has to be on when turning on the PC or I have to manually force the detection process (as above)

Video = ATI 4550
MOBO = ASUS P7P55D-E LX

A:ATI HDMI Detection of Hardware issue

I have read many post on this issue and First of all yes the TV must be on at all times on the HDMI signal if you don't want the signal broken don't turn the tv off use you're power saving feature

Let windows turn the monitor off for you that way simple mouse movement will bring back the screen also you should be able to right click and disable onboard then enable the HDMI sound by right clicking

I might add using power saving feature is the only way to keep from breaking the HDMI connection also i don't advise any heibernation or sleep mode because that will just break the signal the best thing to do is let windows turn the monitor off but do not put your machine in sleep mode or any other power save featurn just treat your tv as a monitor

I find this the only and best way to work the ati cards and yes you keep unplugging and plugging the HDMI cable something is bound to go wrong eventually

Read other 2 answers
RELEVANCY SCORE 46.8

Hello guys.
 
I have a small issue with a drive being detected from within my PC that works from an external caddie.
 
For a few years i have had two drives inside my system. C drive and F drive. I recently removed both drives when i went off to India for a few weeks for security reasons. Today i find the F drive is not showing up. It is listed under "Show hidden hardware" in the profiles. I opened up the PC and swapped the ribbon cables around and rebooted. It started to install new hardware and stated it had installed it because i seen the name of the installed hardware (The F drive) yet it was still not listed in "My Computer" alongside the C drive. I then removed it an placed in in an external caddie and booted again. I got the same install message ( I had uninstalled the driver prior just in case) and it installed from the caddie and works.
 
I can not run it from there because i have two other drives that need to be listed for my Music Studio when it scans for files needed to open past and present work that uses files located on those drives my name. The issue can not be the cables as they both run C drive internally. 
 
I will try again later to install it from inside the PC as my main slave drive but it seems null. The issue may be software based or configuration based. But so far , i am mystified by this issue. 
 
Any ideas?
 
Thanks in advance.

Read other answers
RELEVANCY SCORE 46.4

I have this previous problem... you need not read this for this current problem though
http://www.techspot.com/community/topics/bsod-upon-non-safe-mode-booting.212365/

I run on Windows 7 Home Premium 64-bit.

I want to install a newer update on my ATI graphics video driver. So I downloaded the one that suites mine which is AMD Catalyst Software Suite Omega (14.12) (for Radeon HD 6000 series) and during installation it says "Failed to load detect driver" and stops. Now I don't know what to do.

This is my first time downloading this so there are no programs like this in my "currently installed programs". I tried uninstalling the driver in the Device Manager but it just reinstalls back(when I scan for hardware changes). Thanks for the reply!
 

A:AMD Catalyst Failed to load driver detection

Is this a desktop PC or a laptop?
 

Read other 1 answers
RELEVANCY SCORE 46.4

the motherboard is an msi 760Gm-E51
I went to msi website and downloaded the drivers for the motherboard because the system was crashing. I thought it was probably caused but the graphic driver but when I uninstall the driver and tried to run the ccc install again I still get failed to load detection driver. I tried using ddu to totally uninstall the current graphic driver but that didnt work.
I dont know what else to try to get this computer working

Any help will be great thanks in advance.
 

A:ccc failed to load detection driver with new install of win 7

Did you try the Factory install disks.? I only downloaded a few drivers once & it messed up my Win7 PC. I am sure you will get help from one of our great Tech Gurus on this forum.
 

Read other 7 answers
RELEVANCY SCORE 46.4

Error messages have been popping up for a while now saying how I am low on memory, but until now there have been no serious consequences. Now, I can only watch 1 YouTube video at a time and even then, it will usually crash after about 5 minutes. I can't have more than 1 tab open and in general the laptop is slower. It looks like the computer is only able to use 2GB of the 8GB that it knows is installed for some reason. Should I open it up and try to unplug and re plug the RAM back in? I've used CCleaner to clear anything that might be taking up memory and nothing is working. I've also done a full scan with Malwarebytes and come up with nothing. Any help is appreciated.

I am not sure what MOBO I have, but the laptop model is: Acer Aspire V5-573-9863

In addition to this memory issue, I used to have a problem where the CPU would sit at 60%-80% usage for no reason with no applications running, but that issue seems to have sorted itself out. Thought I might mention it just in case it is related. I just remembered that the CPU usage only jumps and sits when I open the Downloads folder in windows explorer, and I can fix it by restarting the Windows Explorer process, but if anyone has any tips on how to deal with that as well, I would appreciate it.

A:Oddly high RAM usage/ detection issue

Hi and Welcome to TSF!

Let's take a look at your system hardware specifications. Please follow this guide on how to get those specifications:

How to find your system specifications - Tech Support Forum

Read other 3 answers
RELEVANCY SCORE 46.4

I am trying to install a raptor x 150 in my computer. The motherboard picked it up, and windows picks it up. however Acronis does not and neither does the windows installation. I would like to clone the drive if that is possible but first the drive needs to be recognized.
I have formatted it in windows 7 64 as an active partition NTFS. Any help is greatly appreciated
 

A:Solved: Raptor X 150 and windows 7 64 Detection issue.

I fixed the Problem. I used Data lifegaurd tools. and just set the drive up for xp. then windows and Acronis picked it up Now I've got it set up and running smoothly on Win7 64.
 

Read other 1 answers
RELEVANCY SCORE 46.4

Error messages have been popping up for a while now saying how I am low on memory, but until now there have been no serious consequences. Now, I can only watch 1 YouTube video at a time and even then, it will usually crash after about 5 minutes. I can't have more than 1 tab open and in general the laptop is slower. It looks like the computer is only able to use 2GB of the 8GB that it knows is installed for some reason. Should I open it up and try to unplug and re plug the RAM back in? I've used CCleaner to clear anything that might be taking up memory and nothing is working. I've also done a full scan with Malwarebytes and come up with nothing. Any help is appreciated.

I am not sure what MOBO I have, but the laptop model is: Acer Aspire V5-573-9863

In addition to this memory issue, I used to have a problem where the CPU would sit at 60%-80% usage for no reason with no applications running, but that issue seems to have sorted itself out. Thought I might mention it just in case it is related. I just remembered that the CPU usage only jumps and sits when I open the Downloads folder in windows explorer, and I can fix it by restarting the Windows Explorer process, but if anyone has any tips on how to deal with that as well, I would appreciate it.

A:Oddly high RAM usage/ detection issue

Hi and Welcome to TSF!

Let's take a look at your system hardware specifications. Please follow this guide on how to get those specifications:

How to find your system specifications - Tech Support Forum

Read other 3 answers
RELEVANCY SCORE 46

I use the MS Wireless Keyboard 1000 and MS Wireless Optical Mouse 2000 with my HP HDX 16t (dual core) notebook running Windows 7 x64.

I installed both Intellipoint 7.0 and Intellitype 7.0. About 50% of the time when I boot, the mouse driver fails ("This device cannot start"). I have to manually uninstall the driver and then search for new devices. It re-installs the driver and then the mouse works fine.

Windows update had 3 recent files--update to Intellitype and to Intellipoint I think. Also a MS Mouse and Keyboard Detection Driver (USB), Driver ID = 20305405. It fails to install after many attempts. I've tried turning off all start-up programs without success. Error code 80070103. I think if this could get installed it would end my mouse driver problem. Any help?

A:MS Mouse & Keyboard Detection Driver (USB) fails instal

Try uninstalling Intellipoint and Intellitype. Reboot, and let Windows find the drivers automatically. You shouldn't even need those installed.

Read other 8 answers
RELEVANCY SCORE 46

we have disabled SSL2 & SSL3 and TLS 1.0 also in my server but still showing 20007 - SSL Version 2 and 3 Protocol Detection vulnerability issue.
can you help me anyone ? 
Server SSL existing setting screenshot for your reference 

Read other answers
RELEVANCY SCORE 46

Hello all, First, I apologize for my english, I know I'm not the best at this language but I hope you will understand my problem.  I've got a Thinkpad T560. This laptop was with Windows 7 and I upgraded it to Windows 10. Unfortunately, when I plug my HDMI cable, I have the image on the second computer but no sound. All my drivers are up to date.Furthermore,  I can't find the HDMI device (my TV) in the taskbar  (I mean in the right-bottom corner).  I have tried a lot of solutions:- Update drivers- Click on the sound icon and show the disabled devices in the playback menu- Update drivers from Device Managers etc..  Could you please help me to find a solution ? Thanks.

Read other answers
RELEVANCY SCORE 46

Good day,

I have an unusual situation with my HDMI and would like some advice or ideas.

I have 2 TVs with HDMI input, both LG (I believe 32LH20R and 22LH20R).

When I connect my hdmi to 22lh20r, the sound device says "not connected".
When I connect to 32lh20r, everything works fine.
If I connect to 22lh20r after connecting to 32lh20r, the sound device is now detected!
But when I reset my computer, the sound from 22lh20r says "not connected" again.

I tested two notebooks on it so far, and could reproduce on both. One with a GeForce 9600M GT and the other with a GeForce GT 540M.

I think that this could be some issue with the TV, but since it work after connecting to the other TV, I was thinking if there is a way to force the detection, or to force the driver from one TV to the other, or something like that.

Thanks in advance.
Gui

A:Issue with HDMI sound detection - unusual situation

Additional information:

I tryed to override EDID, with phoenix edid editor and monitor asset manager, but had no success with that. Turns out that they only collect the first 128 bytes from the edid, leaving the CEA extensions out, and this would be where the EDID stores whether the monitor has audio or not. =/

Also, it seems like it's not possible to "force" the playback device to "be detected", or at least I didn't find a way so far.

If anyone could help with EDID overriding, or this way to trick windows into believing HDMI sound is connected, I would appreciate a lot!

Thanks,
Gui

Read other 2 answers
RELEVANCY SCORE 45.6

Hi,
I got a problem with the Internet Explorer 11 installation I received through Windows Update. It is on a
Windows 7 x64 SP1 computer.
The installation failed, and Internet Explorer 11 doesn't appear under the Show Installed Updates section of Programs and Features.
Because of that, Windows Update tries to re-run the update, but keeps failing everytime.
My first idea was to download the IE 11 installer for Windows 7 x64 from Download Center and launch it; it fails with the error message "A more recent version of Internet Explorer is already installed".
When launching IE, effectively, the version is 11.0, but if I try to install an update for IE, like an IE 11 language pack or just a security update, it fails saying it doesn't apply to this system.
So basically, the IE installer detection logic says IE 11 is installed, while Windows Update says it is not, as for other updates related to IE 11. I have a tendency to believe Windows Update since it doesn't appear in Show Installed Updates.
I tried removing the HKLM\Software\Microsoft\Internet Explorer registry key and its equivalent under SYSWOW64, no result. I also deleted the iexplore.exe file under Program Files\Internet Explorer and Program Files (x86)\Internet Explorer, no result. Removing
those files is not easy since you have to take ownership on each of them because of the default permissions that are very tight.
Does someone knows the detection logic of the IE 11 ... Read more

A:How to force Internet Explorer 11 reinstallation after failure (detection issue)?

it sounds like IE11 is partially installed.
you may have some success by performing this uninstall method (expect a couple of warnings/errors during the process)
Open an elevated CMD console (Run as administrator)
FORFILES /P %WINDIR%\servicing\Packages /M Microsoft-Windows-InternetExplorer-*11.*.mum /c "cmd /c echo Uninstalling package @fname && start /w pkgmgr /up:@fname /norestart"Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.

This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Read other 5 answers
RELEVANCY SCORE 44.8

Hello
I want to put info in easy to read format as below:

Personal profile
----------------
I am not a newbie to computers and have been using/modding OS/hardware since last 10yrs or so (though personal desktop/mobile/tablets only). Everything from Formatting, imaging, troubleshooting(though stuck on this), Ramdisks, water cooling, etc etc etc.
So when i inform you of the situation below , you can take it that what i am writing below is the exact scenario.

Computer Profile------------------
TSG Report:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft(R) Windows(R) XP Professional x64 Edition, Service Pack 2, 64 bit
Processor: Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz, EM64T Family 6 Model 30 Stepping 5
Processor Count: 4
RAM: 16374 Mb
Graphics Card: ATI Radeon HD 5400 Series, 1024 Mb
Hard Drives:
C: Total - 61055 MB, Free - 51011 MB;
D: Total - 10252 MB, Free - 384 MB;
E: Total - 216587 MB, Free - 6254 MB;
F: Total - 61051 MB, Free - 6068 MB;
G: Total - 153699 MB, Free - 10033 MB;
H: Total - 21289 MB, Free - 7471 MB;
I: Total - 717818 MB, Free - 675210 MB;
J: Total - 11633 MB, Free - 11552 MB;
R: Total - 7169 MB, Free - 6087 MB;
Motherboard: ASUSTeK Computer INC., P7H55
Antivirus: avast! Antivirus, Updated: Yes, On-Demand Scanner: Enabled

Everest Report:
See attachment for Full Computer configuration (including bios and hardware)
View attachment Report.txt

just in case, CPU Overclocked by ~ 27-30% to 3.4 to 3.6 Ghz &
FSB to 200Mhz (50... Read more

A:Kingston SSD and Asus AMI BIOS detection Issue (NTLDR)> Very weird> Not a Noob> Help

No SP3?

Anyway this will bump you.
 

Read other 2 answers
RELEVANCY SCORE 44.8

My laptop is T430 of Lenovo. I have two drives installed on my computer, one is SSD (128 G, PLEXTOR), another is HDD (500 G, Samsung). Now I have encountered a serious issue that I could not find the HDD in my Windows 10. Almost two weeks ago, I found my laptop crash frequently. I think there is an extreme incompatibility between the Windows 10 and SSD. I even reinstalled my OS for several times. But it still crashed. Even I opened a simple word file, it does not respond. Two days ago, the issue got even more serious. When I boot my system, I found a problem with "2100: Detection error on HDD0 (Main HDD)". It suggests me to press the "ESC" button to enter into the OS. However, I could not find my HDD on my computer anymore. I have some paramount important data and files in this drive.  Could some friends provide some meaningful suggestions of recovering data and files for me, please?  I'm very anxious. Thank you very much!

Read other answers
RELEVANCY SCORE 44.8

I've got a really strange problem, that makes it really difficult to post any diagnostic information about the problem. I've tried running HiJackThis, MalwareBytes anti-malware, Trendnet housecall online scanner, GMER, ad-aware, Spybot S&D, RootRepeal and dds.scr. The results are pretty much the same for all of these programs. The scan/analysis starts, sometimes it gets partway through scanning, and then the application window gets closed. After this happens, in the case of .exe files, the resulting program is rendered useless, in that further attempts to launch it result in a "Windows cannot access the specified device, path or file. You may not have the appropriate permissions to access the item." and you also cannot rename, or delete the file.

Trend-net housecall is also pretty interesting, in that it runs inside the browser, and after it was terminated (part way through the scan) iexplore.exe now exhibits the same error in not being able to launch. This not being able to launch persists across reboots also. I then installed firefox.exe on the system, was using it for a brief period, tried trend-net housecall and now it too is showing the error in not being able to launch.

dds.scr is able to be to be re-launched, and it brings up the black command window type screen, but never brings up the notepad windows. It seems unaffected by the termination behaviour, and is able to be re-launched.

I was able to run A2 anti-trojan, and do have a log of what it... Read more

A:Strange malware issue - unable to use detection tools or virus scanners

Hi Thomas Lovie,Welcome to BC HijackThis forum. I am farbar. I am going to assist you with your problem.Please refrain from making any changes to your system (updating Windows, installing applications, removing files, etc.) from now on as it might prolong handling your log and make the job for both of us more difficult.I share your academic interest. So let's have a go at it.Download and run Win32kDiag: Download Win32kDiag from any of the following locations and save it to your Desktop. Download Win32kDiag (Win32kDiag.exe) - #1 Download Win32kDiag (Win32kDiag.exe) - #2 Download Win32kDiag (Win32kDiag.exe) - #3 Double-click Win32kDiag.exe to run Win32kDiag and let it finish. When it states "Finished! Press any key to exit...", press any key on your keyboard to close the program. Double-click on the Win32kDiag.txt file that is located on your Desktop and post the entire contents of that log as a reply to this topic.Next......

Also post the A2 anti-trojan log.

Read other 30 answers
RELEVANCY SCORE 44.4

So I have 150 OptiPlex 5050's, and a Windows 10 image deployed via WDS. I have the latest (8073) Realtek audio driver from the Dell site added to my WDS server, and when a machine is imaged the driver is installed. However, it doesn't install the Maxxaudio Waves application and services so when headphones are plugged in to the front jack Windows doesn't detect it and route the audio to the front jack.
 If I install the DUP manually all the software is installed and the jack detection works fine, but if I run the DUP silently as a startup script I get the driver but not the Waves software. I have also tried running the Waves MSI that is installed with the driver, both scripted, through Group Policy and manually, but this also fails to install correctly.
I am assuming this has something to do with the reboots required after installation, but I can't manually install the driver on 150 PC's I need to automate it somehow.
 Does anyone else have this problem or know of a workaround? I just need the headphone detection to work properly!
 

Read other answers
RELEVANCY SCORE 43.2

Okay i have turned my pc on after not having it on in 3 months (due to having to buy a new graphics card) anyway everything was running smooth untill i heard a few beeps only to see that avira has detected few viruses i had a choice to either remove or ignore so i pushed remove 10 minutes later avira is detecting the virus again so i click remove and then do a quick scan with Malwarebytes and it did not detect anything so i did a full scan with my Avira Anti Virus and it found 1 warning 13 hidden files and 30 detections now i would like to know what to do from here to completely get rid of the 30 detections that it has found the two that it has detected look like this: TR/BHO.ZWANGI.Trojan TR/GerVar.EJ Trojan there are 30 of them in my Avira quarantine so what i would like to know is where to go from here thank you.

A:avira virus detection beeps with detection pop ups

Hello,Please follow the instructions in ==>This Guide<==.Once the proper logs are created, then make a NEW TOPIC and post it ==>HERE<==If you can produce at least some of the logs, then please create the new topic. If you cannot produce any of the logs, then post back here and we will provide you with further instructions.

Read other 2 answers
RELEVANCY SCORE 43.2

Okay i have turned my pc on after not having it on in 3 months (due to having to buy a new graphics card) anyway everything was running smooth untill i heard a few beeps only to see that avira has detected few viruses i had a choice to either remove or ignore so i pushed remove 10 minutes later avira is detecting the virus again so i click remove and then do a quick scan with Malwarebytes and it did not detect anything so i did a full scan with my Avira Anti Virus and it found 1 warning 13 hidden files and 30 detections now i would like to know what to do from here to completely get rid of the 30 detections that it has found the two that it has detected look like this: TR/BHO.ZWANGI.Trojan TR/GerVar.EJ Trojan there are 30 of them in my Avira quarantine so what i would like to know is where to go from here thank you.DDS (Ver_10-03-17.01) - NTFSx86 Run by DJ at 19:40:17.32 on Thu 09/09/2010Internet Explorer: 7.0.5730.13 BrowserJavaVersion: 1.6.0_20Microsoft Windows XP Home Edition 5.1.2600.3.1252.1.1033.18.1023.518 [GMT -7:00]AV: AntiVir Desktop *On-access scanning enabled* (Updated) {AD166499-45F9-482A-A743-FDD3350758C7}============== Running Processes ===============C:\WINDOWS\system32\nvsvc32.exeC:\windows\system32\svchost -k DcomLaunchC:\windows\system32\svchost -k rpcssC:\windows\System32\svchost.exe -k netsvcssvchost.exesvchost.exeC:\windows\system32\spoolsv.exeC:\Program Files\Avira&... Read more

A:avira virus detection beeps with detection pop ups

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. Please include a clear description of the problems you're having, along with any steps you may have performed so far.Please refrain from running tools or applying updates other than those we suggest while we are cleaning up your computer. The reason for this is so we know what is going on with the machine at any time. Some programs can interfere with others and hamper the recovery process.Even if you have already provided information about your PC, we need a new log to see what has changed since you originally posted your problem.We need to create an OTL ReportPlease download OTL from one of the following mirrors:This is THE MirrorSave it to your desktop.Double click on the icon on your desktop.Click the "Scan All Users" checkbox.In the custom scan box paste the following:CODEmsconfigsafebootminimalactivexdrivers32netsvcs%SYSTEMDRIVE%\*.exe/md5st... Read more

Read other 2 answers
RELEVANCY SCORE 41.2

not sure which section this pertains to specifically, but "drivers" seems close enough.
issue

i recently upgraded to an sli graphics configuration. since upgrading, my previous method of avoiding the TDR driver crash has stopped working.
known fix that i can't get to work anymore

when running a single gpu, i could disable and uninstall the nvidia hd audio device, then disable and uninstall the hd audio controller under system devices. problem solved, no crashes.

after adding the second gpu, there are now two hd audio devices and two hd audio controllers. upon disabling or uninstalling either controller, the system automatically re-installs the hd audio devices previously uninstalled, which in turn causes the hd audio controller to re-enable/re-install itself.

to be clear, all hd audio devices and hd audio controllers on my system must be disabled AND uninstalled to prevent TDR (or, since the upgrade, full system freezes or restarts. sli = double TDR?)
already tried it

Drivers - Turn Off Automatic Driver Installation this tutorial does not stop automatic driver installation, it just prevents the downloading of drivers from windows update. tried it anyway, no help.

How to Stop Windows From Detecting New Hardware | eHow disabling automatic hardware detection as described here does not prevent automatic device recognition and driver re-installation.

safe mode does prevent the drivers from re-installing immediately, however it also prevents most software fro... Read more

A:Disable automatic hardware detection and/or automatic driver install

Disable this service:

UPnP Device Host

Read other 5 answers
RELEVANCY SCORE 40.8

I recently bought a new DVD RW drive to replace my old one which had a burnt out laser. When I put in the drives I set up my secondary hard drive and my new drive as cable select and attached the master connector to the hard drive and the slave connector to the DVD. I booted the system and immediately got a boot error saying it couldn't locate either of the IDE drives. So, I spent the next hour or so trying every possible jumper combination setting and got the error no matter what upon boot. Finally I put them both back to CS and just skipped past the error because I was sick of messing with it. To my surprise, the drives showed up in My Computer and functioned but at a very very slow speed. I ran a PC Pitstop scan and it showed a drive speed of 2mb/sec which is really slow. So, clearly something isn't being detected properly. For some reason also, my BIOS doesn't have any "auto-detect" option to try to detect attached drives so in the BIOS it just has two unknown devices attached to the primary and slave IDE drives.

Any help would be much appreciated.... thanks !
THanks
 

A:Solved: IDE Hard Drive and CD drive detection issue

And the make and Model of your PC???????

my BIOS doesn't have any "auto-detect"Click to expand...

use "Load defaults"
 

Read other 2 answers
RELEVANCY SCORE 40.4

The computer's a year old, running XP, and my boyfriend and I have no idea what's wrong with it (it's his). I'd put in hardware support but I don't know which piece of hardware may be corrupted, exploding as we speak, or what.

It began last night. He's done this before -- he has two monitors, one meant for a TV (I believe) and another old computer screen. Normally it runs on the TV one because it's bigger. He switched to the older one to show me how he can adjust the settings so that it's all vertical. That was great and dandy and we didn't expect any issues. He's done it before and it really isn't doing much to the computer.

Later, after midnight, he goes to switch everything back to normal. First, the computer acts like the monitor is there but that it can't do anything -- it tries to go into sleep mode or something. Then I suggest he unplug, shut down, plug things back in normally, and power back up. This appears to work.

I was a bit happy then, until we got to the XP loading screen. It's going... and then after, it flashes, then goes black. Nothing comes up, nothing does anything.

And so the three hour saga of last night begins. We restart, we spam F8, we get into safe mode, he disables Nvidia but can't open the application. Nor does his mouse function in safe mode (I know some don't, but it really doesn't help the situation). I've used my laptop to bring up shortcut keys and we're functioning through everything that way. He restarts after disabling Nvidia, an... Read more

Read other answers
RELEVANCY SCORE 40.4

Hi mates,i hope you doing well i have some issue in my pc netbook thinkpad x201 when i installed driver i get black screen since windows 7  log in i try to uninstall driver from safe mode and networking windows start with normal mode without graphics card driver without brightness control i try to install all driver that has compatibale with hardware material    

Read other answers
RELEVANCY SCORE 40

I posted the same on their tech support forum but I'm beginning to think the issue, while it may have been exacerbated by the game Guildwars 2, is likely on my end, but I have a number of suggestions, none of which has worked. Also tried my own stuff.
 
Anyway, here is what I posted on their own tech forum:
------
 
Having a lot of issues getting into gw2…I have bits and pieces of problems others have had in the past, but nothing seems to work, so I’m re-downloading the game, basically. All I want to do is play the freaking game, why does it have to be so much trouble?
 
 
Once in awhile I will get that blue and yellow graphical glitch on something. Just more info for diagnosis. If and when this happens, it’s always immediately apparent at character select. However…The biggest problem I have with GW2 is also on login – it either crashes or bluescreens my computer right after clicking play and the client tries to load for 5-10 seconds. For the past few days, 90% of the time it just crashes. If I try to patch after that point, the patcher stops at Downloading 0KB and will not budge from it. Not even to log in. I have to reboot my computer to get it past “Downloading 0KB”.
 
 
One post I found said that they started having all these problems after downloading a number of games on Steam (which I have done off and on due to a friend getting me a few gifts) , until their HD shrank down to 30 gigs. Same here, an... Read more

A:Odd memory issue? HD space issue? Also, can't update GPU driver (GW2 crashing)

Unfortunately, though I thought I did, I have no images of the odd cyan/yellow graphics glitch, and I have no way of getting one (google didn't turn up any that looked the same as mine, granted some were similar).
 
Edit - I also noticed after re-enabling page memory on my primary drive after freeing up some space, that in the error logs, the amount of paged memory in use is for some reason higher. I can't imagine why this is, but maybe I don't understand the process.
 
 
 
*--> System Memory <--*
Physical:   845MB/ 2047MB  41%
Paged:     5375MB/ 7009MB  76%
Virtual:    822MB/ 2047MB  40%
Load: 58%

Read other 19 answers
RELEVANCY SCORE 40

I am attempting to auto-discover which drivers need to be updated on my new XPS 12 9250. I can manually list available drivers, but the auto-detect feature isn't working; "Driver Detection Not Available".

Read other answers
RELEVANCY SCORE 40

Customer Support:For my current PC functional problems, I need help with resolving what appears to be an inconsistency with the available 8.1- and Win 10-related driver/utilities updates that are shown as "Recommended" for my PCs on Lenovo's "Driver & Support" site. Here's why. I purchased two (2) Yoga 2 11" Laptops, Type 80CX, Pentium Quad Core N3520 CPU, BIOS 92CN35WW Baytrail-M with Win 8.1 installed. At some point, the first of two problems showed up: the Airplane Mode On/Off (F7 Key) quit working on both PCs, presumably due to Win 8.1 updates/patches. But, I lived with it as the Mode could be switched by alternate means. Next I decided to take advantage of the free Win 10 update offer, but decided to upgrade just one of the PCs - so now I have one Win 8.1 and one Win 10 PC. Eventually, the second of the two problems showed up, but on just the Win 10 PC, again presumably due to Win 10 updates: the keyboard and pointer would quit working during use in the "Notebook" mode - one of the four operating modes, the other three being Stand, Tent, and Tablet Modes. I could temporarily fix this by reboots. This I could not live with, so I began searching for solutions. Using the Lenovo Drivers & Software site, I selected certain PC updates that I believed to be pertinent to this problem as well as some additonal updates that could be important and depend on the other updates to fix the problem. On this Win 10 PC, I installed 1) BIOS Baytrail-M update 92CN93WW.exe, 2) Yoga M... Read more

Read other answers
RELEVANCY SCORE 40

It shows two drivers with errors, mobile 4 series express microsoft wddm 1.1.  If I delete them and reboot, they both come back.  The lenovo system update does not recommend a newer video driver, the intel tools don't find it, if I manually download and try to run the win10 one for x64 systems it says it does not meet the minimum system requirements.  Some searching shows it to be a 4500 series type driver so I would think it would have worked.  Any ideas?

A:R500 video driver issue - is there a win10 driver ...

Are you running 32-bit or 54-bit windows 10? Does your R500 have integrated or discreet graphics?

Read other 2 answers
RELEVANCY SCORE 39.2

Well I just found this forum today, so I decided to ask this question.

About a year ago, I had to system restore, because my computer just kept FSODing on me. When I went through the system restore process with Dell, at the end of the process I got an error. I don't quite remember what it was, as it was so long ago.

Ever since then, my computer has been completely without sound. I have tried everything from installing/reinstalling/uninstalling drivers, to the most simplistic, such as checking if my speakers work, or are connected.

So far, nothing has brought me any closer to figuring out what this problem could be. I am pretty sure that somehow, my sound card (its an integrated one) has just fried or something, but I really dont know.

So... is my sound card busted? Or are my drivers just not working for some reason?

Thanks for your help in advance.
 

A:Sound Card issue, or driver issue?

System restore . . .

System restore or system recovery? Did wipe the old operating system out and reinstall everything from scratch (system recovery) or did you use Windows' system restore to backdate the configuration. (Frankly, I think the choice these of terms by the industry are very confusing.)

Assuming system recovery and assuming the sound worked before and quit after system recovery, I'm for a misconfiguration. But, the simpler fix might be a cheap add-in sound card.
 

Read other 3 answers
RELEVANCY SCORE 39.2

Hi all. I'm not sure where to start with this issue, it's bit spread out but it all started while I was gaming and the game froze and then the computer crashed. The freezing happened every once in a while, but the crashing had never happened. During the restart I see this...
And then when windows tried to start up, I got a blue screen and then it rebooted once again.
Determining that this was an issue with the bios, I resetted the CMOS. No change. So I flashed the bios with the newest update. Again, no change. I was able to boot my computer in safe mode with no issue though. So I figured it must be a driver issue. I started by removing my graphics driver for my 8800GT and rebooted. It was able to start up Windows fine, but the stuff in that image above still occured. I then tried to install the drivers located on the NVIDIA website instead of using Window's driver. But I got a message saying that I'm not using Windows 7 or Vista and as such I cannot install (but I am using Windows 7 Pro). So I tried using the Window's auto driver install and when I restart, I am unable to load Windows normally. So I'm really puzzled now because right now I believe it's a driver issue, but I can't install any other driver than the one Window's installs. Also if I am able to get a driver installed, how would it relate to the above image? Thanks for any help, and if more information is needed please let me know.

Read other answers
RELEVANCY SCORE 39.2

Hi all. I'm not sure where to start with this issue, it's bit spread out but it all started while I was gaming and the game froze and then the computer crashed. The freezing happened every once in a while, but the crashing had never happened. During the restart I see this... And then when windows tried to start up, I got a blue screen and then it rebooted once again.
Determining that this was an issue with the bios, I resetted the CMOS. No change. So I flashed the bios with the newest update. Again, no change. I was able to boot my computer in safe mode with no issue though. So I figured it must be a driver issue. I started by removing my graphics driver for my 8800GT and rebooted. It was able to start up Windows fine, but the stuff in that image above still occured. I then tried to install the drivers located on the NVIDIA website instead of using Window's driver. But I got a message saying that I'm not using Windows 7 or Vista and as such I cannot install (but I am using Windows 7 Pro). So I tried using the Window's auto driver install and when I restart, I am unable to load Windows normally. So I'm really puzzled now because right now I believe it's a driver issue, but I can't install any other driver than the one Window's installs. Also if I am able to get a driver installed, how would it relate to the above image? Thanks for any help, and if more information is needed please let me know.

A:8800GT Driver issue? Or maybe its a bios issue.

hey did you reboot in safe mode and review everthing in that area and or install the drivers in there as well

how about system restore? i try not to but sometimes have to

Read other 3 answers
RELEVANCY SCORE 37.6

Dear HP Support, Please help me to install VGA driver and Graphical Driver for My system. I have installed windows 7 32 bit. System Model :  Notebook-14-AC171TU(T5Q67PA#ACJ) Thanks&Regards,SelvaG

A:Display Driver-VGA Driver Issue

Hi: This is a peer to peer forum, not HP support.  HP maintains no official presence here. The only suggestion I can offer would be to try the W7 32 bit graphics driver directly from Intel. The 2nd driver on the left is the auto install file. https://downloadcenter.intel.com/download/26078/Intel-Graphics-Driver-for-Windows-10-and-Windows-7-8...

Read other 1 answers
RELEVANCY SCORE 34.8

First off Hello!

Ok let me get right to it. I been seeing a issue with Hp printers trying to reinstall themselves everytime i reboot the machine. I dont have Pc specs for u cause this problem is on about 20 different pc's right now and i dont remember what all the specs are to all of them.

This is pretty much how it goes.
I install the hp printer drivers following the hp installer. once that is completed of course retart the machine. This is when i run into problems. When the pc comes back up from reboot for whatever reason the new hardware wizard always pops up and says new hardware found( this new hardware is of couse the printer that i just installed). Now i have reinstalled the drivers like 100 times and i have removed and reinstalled the usb drivers try make sure that was not the issue. One thing that i have noticed is that this problem only seems to happen to xp machines that have server pack 2. Please anyone out there that might have a solution for this please let me know.

I have contacted Hp and they tell me that it is windows. I then of course call windows support and bounce it off them and they tell me that it is hp.

I have tried serveral things to fix this issue:
Reinstalling printer drivers
Reinstalling usb drivers
changing out all printer and usb hardware.(going as far as making hp send me a new printer just to make sure that was not it)

PS. if anyone needs more info from me please let me know
 

A:Hp driver issue

DdollarBill said:

One thing that i have noticed is that this problem only seems to happen to xp machines that have server pack 2. Please anyone out there that might have a solution for this please let me know.Click to expand...

Try Microsoft's SP2 helpline 1-888-SP2-HELP maybe they know of a known issue.. its possible that HP knows about this as well. Ultimately you may have to choose between SP2 and your printer to get this working.
 

Read other 1 answers
RELEVANCY SCORE 34.8

The other day I had to re-install my XP OS. For some reason, the CD my drivers came with didn't like the audio driver for some reason. Every other time I used this CD before, it always worked. I am getting an error of "Intel audio doesn't support the board listed.

I went to the intel site to look for it. My chipset os d945gtp. On this page

INTEL D945GTP drivers

I'm looking at the second one on the list where it says audio driver. Is that the correct one?

thx

A:driver issue

Unfortunately you haven't filled in your system specs in full but i think the audio drivers your looking for are these D945 GTP audio

Read other 1 answers