Over 1 million tech questions and answers.

Disable on-board video

Q: Disable on-board video

How do you disable the onboard video in the bios ?

Preferred Solution: Disable on-board video

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Disable on-board video

Even though it appears you're having the same problem, please start a new thread when you have a new issue. It's very difficult to keep two problems straight and who's working on what in a single thread.

I've created a new thread for your issue here.

Thanks for your cooperation.

Read other 2 answers

hi, yes, my motherboard has ATI on board video and it's still on. I have a Nvidia geforce 550 ti video card that i much prefer to run my games.

I'm having a video confusion problem in my games where i can't see some of the video. I was told by the maker of the MOD for the specific game that i need to disable the ATI on board video so there wont be any more conflicts with my Nvidia video card.

How do i disable the on board video on my motherboard. the motherboard is the following:

MSI 790FX-GD70


A:how do i disable the ATI on-board video so my nvidia 550ti video card will run my gam

Read other 8 answers

I have a PCI video card that I want to install on my motherboard. I am having a problem disabling the existing on-board video.

My system is:

PC Chips M758LMR v 1.0 MB on board sound/ video
256 Meg RAM
20 Gig HD
Celeron 900 mhz Processor FGA-2 #BX80526F900128SL633
Win 98SE
300Watt Power supply

There is not a place in the device manager to disable the SIS 620 Video.

If I put the video card in a slot(there are 3) the computer will not boot up. If I remove the SIS 620 device, windows reinstalls it when I boot up again. I cannot find any program to remove related to video or video drivers.

It dosen't appear that there is a jumper on the board related to video in the manual I found on the internet. The manual does state that a Video card can be installed.

I have searched the forum and found out that this is a common problem, but didn't find anything specific for my motherboard.

Thanks, Al

A:Disable on-board video

Read other 12 answers

I have an old HP Pavillion model 4440 computer. I need to disable the on board video and audio. How is this done?

A:Disable on board video

Read other 6 answers

Im working on a pc that has a on-board video port, and for some reason when I turn the pc on the screen is black and I get a series of long beeps, my first reaction was to swap out the memory because I know that is a big one for pc's not being able to boot. So with new ram it still has the same result, so I tried to install a pci video card because this pc doestn have a ago slot. Also I cant get into the bios to disable this on board video port. Asus Terminator P4
(1)256 mb DDR pc2100
(1)Intel P4 2.8ghz.

A:How to disable on-board video slot...

Read other 9 answers

I have a Compaq Presario 5000 (5BW160) that I'm trying to install an ATI Radeon 7000 PCI card in. The only problem is that there are no jumpers or BIOS options to disable the on-board video. I have searched Compaq's Tech Support site and tried all of there suggestions to no avail. When I remove the on-board adapter in Device Manager and then reboot the machine with the monitor connected to the ATI card, the computer boots up in 16 colors with the lowest resolution setting. Then when I try to install the driver, the installation fails. It seems it is using the ATI to display, but only wants to install the driver for the on-board Intel 810. Does anyone have any ideas on how to disable the on-board display adapter? Thank you.

A:[SOLVED] Disable on-board video?

Read other 15 answers

i know im working with some ancient equipment, but when youre poor and its free, you cant complain. i just got a hand me down radeon 9250 pci 256mb video card. i have sucessfully installed the card and the drivers and disabled my onboard card through my cmos. however, everytime windows desktop loads, UPNP detects my onboard card and i have to try to disable/uninstall the video card through device manager. if i dont do it fast enough, as soon as my computer detects it, i get a black screen and my computer restarts. then i have to try again. what im wondering is, is there a way to disable UPNP for my onboard card? there are no jumpers on the video card itself, so thats not an option. my motherboard was taken out of a compaq 4090US. please tell me somebody can help...thank you

A:help disable on-board video upnp

With a Compaq board like that the BIOS will be very limited. Is it possible to disable "Plug n Play OS" in the BIOS? You said you actually disabled the onboard video on the motherboard though...so i'm not exactly sure how it's detecting it on Windows startup.

Read other 2 answers

Hey guys,

Right now I have integrated graphics on my PC. I just bought a eVGA 7600GT CO and will get it in a couple days. When I do get the card, what are the steps I need to take to disable the integrated video and switch to the card? Thanks

A:How do I disable my on-board (integrated) video when I get my new 7600gt

Read other 12 answers

I just put together my first P4. Its also my first computer with XP Pro.

I didn't realize the MB I chose had on board video. It worried me because I can't find anywhere to disable it.. Since the board does have an AGP slot I setup an ATI All In Wonder 9600xt thinking plug and play would deal with it.

Everything appears fine but should I even been worried about the IRQ conflicts?

Is there any way at all to disable the video? There is no mention of this in the manual and I can't find anything in the bios, no jumpers that I can see, nothing. Should I care? I'm kinda old school and I remember having to deal with irq conflicts 'back in the day'

the MB is a Gigabyte P4 Titan ga-8s661fxm-775.


A:Solved: gigabyte, disable on board video

Read other 6 answers

I've got a PC Chips M841LR board which works fine but it won't let me install my new Xtasy 64MB Geforce 2 PCI card. I tried it in windows 2000, & now in XP. It seems like this is a common problem but I've yet to see a decent solution. Here's what I've tried,

-disabling &/or uninstalling onboard video drivers & rebooting in vga
-disabling shared video memory (default is 32MB)
-rebooting in vga then installing video card's drivers and restarting

When ever I boot back up my computer locks up with the mouse cursor in the center of the screen. PC Chip's support is not existent, I've seen supposed IRQ reassigning solutions & that confuses me a little bit. I've pretty much given up, please help!!! Thanks in advance,
-Jay Callicott

A:Can't disable Onboard Video on PC Chips M841LR Board - Award Bios, HELP

Read other 15 answers

Hi guys,

What I know is that everytime if a PCI-E graphic card is install on the motherboard, the on board VGA graphic will be disable.
Question: Is there a way that I can use the onboard graphic without physically taking out the PCI-E card.

Note: HP machine

A:disable PCI-E use on board

Read other 6 answers

I have a Compaq Presario CQ5320F. It has a m2n68-la narra 6 motherboard in it made by pegasus (asus). I recently purchased an ATI Radeon HD 4890 video card, and a 600w psu. I'm running windows 7 64bit, and my BIOS version is 5.20.

the issue i'm having is with disabling the on-board graphics on the motherboard. I'm fairly certain I installed the new video card in the correct manner. After installing the 600w power supply and getting it up and running, I went into safe mode to disable the on-board graphics driver. I then shut down my pc and inserted the new video card into my one and only PCI-E slot. upon booting the computer back up, instead of the plug-n-play working, the computer continued displaying on the on-board graphics. I then rebooted again, and went into my BIOS. I went to my primary graphics controller setting, and switched it to PCI-E, saved and exited. The motherboard STILL chose to display on the on-board graphics. I then shut the computer back down, removed the new video card, and decided to start over after removing my CMOS battery for a good minute or two. The same issue happened. My motherboard isnt capable of displaying on both the on-board graphics and the new graphics card, so i know i have to get the on-board graphics disabled before i can use the new card somehow. I've contacted HP and Asus both in an attempt to get a different version of BIOS that will actually do what I tell it to do, but according to both sources, there is neither... Read more

A:cant disable on-board graphics

Are you connecting the external power connectors
to the 4890?

Read other 2 answers

Bought a Turtle Beach Santa Cruz sound card to upgrade from my mobo on-board sound. Installation check program says everything is installed properly, but when it runs a sound check, I get no sound from speakers or headset connected to the sound card however sound is still coming out of on-board system. I guess my question is ..How do I disable the on-board sound system?

A:How do you disable on-board sound?

Make sure in device manager (right click on my computer, properties, hardware tab, device manager) that the on board sound card is disabled and bettere yet uninstall the driver for it. Then restart your computer and go into your BIOS setup. Disable the sound card in your BIOS, it should be under onbaord PCI... I will try and get more info. Then exita nd save BIOS. That should do it.

Read other 3 answers

I need help fixing my computer. I bought my computer with an external (expansion) VGA card with a wide connector. When I lost the wide connector cable I needed to disable the expansion card so I could use the on board instead. I then borrowed a Friend's wide connector and disabled all PCI options in Bios under device security. When I tried to swich on the computer, it will not display anything any more.I tried removing the Bios Battery and waiting for about 5 minutes and put it back still nothing displaying. The computer just keeps making beeping sounds. I have tried removing the expansion card  and connecting to the on board VGA but still getting beeps and after a few seconds, the internal fun(or the power pack fun) makes loud sounds as if about to go mad or maybe bursting so I switched of the computer. Please help resolveSpecs:
Processor: i7
RAM: *8 GM
OS: Win 7 (64bit)

Read other answers

I have purchased a new PC with onboard sound (RealTek HD Audio). I would like to replace it with the EMU 0404 card I already had. What is the best way to do this? Most searches on the web have come up with the advice that you have to disable it in BIOS/Periperals. But is it best to do anything else first?
1. uninstall the software in Add orRemove Programs (which means I wouldn't be able to reinstall it as there wasn't a disk provided)?
2. Disable or Uninstall the driver in the Device Manager?
3. Make any changes in the registry?
Thanks for any help anyone can offer.
XP Home SP3,Intel Core 2 Duo, 2GB RAM, 500GB, MS-7387 motherboard

A:Disable on board sound chip

All I've ever done is disable the onboard audio in the BIOS and its always worked out just fine. That's all you have to do I think.

Read other 2 answers

I see many responses saying either to disable or to uninstall on-board graphics drivers. I have a Dell E310 with Windows XP and currently has the integrated intel chipset. I was just wondering if there was any difference in either disabling or uninstalling the drivers. I'm about to replace my psu and install the graphics card tomorrow so I want to be sure I'm doing things right. Thank you and I appreciate the help.

Read other answers

I'd like to disable the built in speakers on this system and direct all sound out to just the externally connected sound device. How would I do this? Thanks.

Read other answers

First, my specs. P51 with Xeon processor, 64GB of ram, Win 10 Pro, NVIDIA Quadro M2200 Video, Intel HDGraphics P630 Video, Docking Station.  I have two external monitors via my docking station, one on the VGA other on the HDMI port. I also have two monitors via Sabrent USB to VGA devices. While I was out of town last week, Windows delivered an update to the Intel P630 graphics. Got home, put my P51 in the docking station. Bam, video driver keeps crashing, reverting to the basic driver and disabling all my external monitors.  I finally tracked it to the Intel P630 driver, I can uninstall it and reboot and it works fine for a while, but then after a reboot it crashes again.  I've tried reinstalling the NVIDIA driver from both their site and the Lenvo support site, no change. I looked for the P630 driver, but couldn't find it on the Lenovo site, at least as an independant download. It may be included in some other download. I did try getting the P630 from the Intel site, but what I downloaded said it wasn't compaitble with my machine.  Right now it has the same image on the internal monitor and the two monitors hooked to the docking station. Yes, the exact same image on three monitors, which shouldn't be possible under Windows. The two monitors coming in over USB seem to be OK and not have the "same desktop everywhere" issue.  I actually have two docking stations with external monitors, I have an office upstairs in my h... Read more

Read other answers

ok heres the deal, i got a cheap-o pci-e card to put in my box so i can run it into my tv. the problem is that i need to use my on board video as well for my monitor is there settings or something out there i can change to make this work, because when i just hook them up i get no video on ither monitor or tv.

A:runing on board video and video card in my pci-e slot

It can only be one of the two enabled at a time. For most systems, as soon as you put the pci-card in the slot, it disables the on board video.

Read other 1 answers

I just got a new computer and it has a PCi express 16 slot on it and my old video card is agp 8x

what is a good ati card that i could play WoW and CS with for around 150$

A:New computer(on board video) want video card

Great Price here:

Read other 3 answers

Hi all,
I have a dell here with on board video that has failed (someone literally pulled the connector off of the motherboard). The system should be fine otherwise, therefore I was wondering if I could put in a old style PCI video card into one of the PCI slots (it does not have a video slot) and have it work. Or would the onboard video cause conflicts? I know that with some BIOS's you can turn off the onboard video, and this is usually a option if the motherboard has a video slot available (agp, PCI Express). Of course this motherboard does not and is a dell cheapo.

I am thinking it will probably work but thought I would ask before getting a card for it.


A:Can a dell use a pci video card if it has on board video?

Will a PCI video card work? Possibly!

Attached is a pic of a board where the Sub-D connector was pulled from the board, and when it was pulled it shorted out the board, and a PCI card would not work.

Read other 2 answers

Yet another problem needing a solution. I was given yet another PC assembled by my brother (part of the problem). I have everything working except for needing better video. The on-board video only gives me the options of 2 or 16 color @640 x 480 pixel . I obviously need better graphics capability for many of the programs and games we would be using. I have a PCI video card left from a former AGP upgrade on another system that I think should work. I need someone to walk me thru the procedures to deactivate the on board video and install and activate the PCI replacement. All I know about the mother board is what the owners manual tells me. I see no specific instructions on this particular procedure.

The MOBO is a Micro ATX Socket 370 1st Mainboard FR33 with a 733 mHz processor (Cyrix.... I think)....Award BIOS

I've looked all over in the BIOS for a enable/disable on board video...no luck

Any help would be appreciated

A:Replacing On-Board Video with PCI Video

Read other 15 answers

What is better a run-of-the-mill on-board video made in 2000 with 1 mb of video ram, or a pci video card that is made in 1995 and has 4 mb of video ram?

A:Video Card Vs On-board Video

Did you look into the BIOS to see if you can allocate more RAM to the onboard?

Read other 3 answers

I think I have a problem with my on-board video but I'm not 100% sure. Last night while on my computer, my monitor would go black and the power light on the monitor would go from green to amber. This happened several times. The only thing I could do was to turn off the computer and turn it back on. It's an Emachine and I don't know if I could disable the on-board video. But that doesn't matter because I don't have any available slots open to install a video card anyway. What do you think the problem could be?

A:on-board video

It could be the graphics chipset is over-heating, but that would be unusual in a system that has it onboard, as those GPUs are pretty low powered. Unless you over-taxing it with a high-power game or similar at the time?

Its more likely that the connection between PC and monitor is dodgy. Check that the monitor lead is really securely fixed in place, that there are no bent pins either end of the connector lead, and also that the connector to the motherboard is also secure.

Has anyone trodden on the monitor data cable, or could it have got damaged in some other way?

Read other 2 answers

I have an ARK Logic 2000-pv2m video board. I don't want to install it until I can determine what the resolution is. I've search PCWORLD, PCMAG, ZDNET, CNET, and the ARK LOGIC sites. I can find no specs on this item. Apparently ARK LOGIC has been sold but I don't know to whom. Can anyone help?

A:video board

Read other 6 answers

I managed to disable on-board video for my pc in order to use a ATI Radeon 7000. Im having problems with it so i wanted to know how do i get on board video to work again, b/c eveytime i connect the screen to the onboard video it doesn/t show anything.(i know im posting alot about video cards but I really need the help. I really appreciate it )

A:on-board video

Read other 6 answers

HELP!!! I am working on an older computer with a soyo mother board sy-7IWM/L V1/0 500 mhz celron with 128 meg ram. It has on board graphics that i cant seem to get to work. First i looked for drivers, but none of them seem to work i constatnly get error messages when i try to install them, even the ones i downloaded form intel. so i tried to install my own graphics card. and old diamond multimedia dm975. well this created a conflict even though i disabled the on board vga controller it automatically enables itself. It is driving me crazy. ANy ehlp is appreciated.

A:on board video

Try installing the mobo's chipset drivers first then do the video/agp drivers.

Read other 1 answers

Hi all, question please. I have a PIII 700mhz board with on-board video which I have established is not working. How is this fixed, do I have to replace the mainboard or buy a new PC altogether. Or is there a way to test it.
Thanks Andy.

A:On board Video

Read other 8 answers

I have a Dell Optiplex GX270 that no longer displays video. I moved the monitor to another PC and it worked fine. I took a another monitor that I know works and plugged it to GX270 and it didn't work.

When I opened the case, the power supply was very, very hot. SOOOOOOOOO, I purchased another power supply in case it was bad. I bought an ATI Video card and installed it.

Does anyone know if the on-board video in the GX270 needs to be disabled and if so, how do you do that in the GX270?

Have a merry Christmas!

A:Solved: On-board Video

Read other 6 answers

I have a Gateway GT5252 Desktop here at work from one of my co workers friends. The on board video died. She put in a PCI Express Graphics Card. There is still no video. We think we need to go into the BIOS and change the information related to graphics around to do the PCI Express Graphics Card instead of the on board. The problem is that when we boot it up it wont show anything. Any suggestions? If anyone can post by the end of the day (230/245) that would be great that way we can get started on fixing the issue really fast.

thank you

A:On board video issue

Read other 6 answers

I'm running an old Savage Pro on 32mb RAM and noticed in CMOS that I could associate more. Would there be any adverse affects in pumping that 32 up to 64? I'm running 1Gig of RAM right now.

A:Attributing more RAM to on-board video

Read other 10 answers

I currently have a p3 500 and a voodoo3 1000 8mb agp card. I'm looking to upgrade my motherboard/processor. I've been shoping around and have seen alot of motherboards with on-board video. What is better, on-board video or video cards? I play games, internet, etc...

Any opinion will be helpfull..


A:on-board video vs. cards

Videocards are better.

Read other 3 answers

greetings all,

I have a PC Chips motherboard, (m756mrt), with 750 p111 and 512 mbs of pc133.
the manual says the onboard video can use 64 mbs of ram....I have it set that way in the bios, but it only shows up using 32 mbs, (system and sysoft sandra) any ideas?

thanks much

A:on board video memory

Read other 6 answers

I have a gigabyte model ga-5smm motherboard with onboard video. I want to install a pci video card and don't know what to change in the bios to disable the onbard video.
can anyone help?

A:disabling on board video

Most of them are pretty easy just go through all the options in the bios until you see it.. Write down any changes you make so you can put them back..

Remember to go into device manager and delete the old video card there to then reboot dissable then replace...

All bioses can be different so it is tuff to tell you how..

Read other 2 answers

i was just recently working on a xp machine and i left it for about roughly 5 min and coming back i noticed the screen just black out , it was hooked up to a kvm switch so i pluged it in directly and still nothing ... i took apart the pc and put it back together , and i also tried a pci video card.( was originally onboard ) it just amazes me that this can happen like this but what is the fist thing that comes to your mind .... the pc goes on all fans are going .... thank u for feed back

A:on board video died?

Although it's usually something else don't forget to try another monitor. On some MBs with onboard video adding a PCI video card will disable the onboard, but on some it won't so that can still be the problem. Start with everything removed except CPU/HS/Fan, RAM(one stick if you have two) and video. Try resetting BIOS with either the MB jumper or removing the battery. After that it's replacing parts. What make and model do you have for a system?

Read other 2 answers

I have an "older" PC Chips M747 motherboard with an 8MB SiS 6326 AGP video chipset on-board. It's been good, but the flight simulator I use appears as though it's beginning to desire faster video, plus my kids use quite a few graphic intensive art programs. I have an open PCI slot(no AGP slot), & was thinking about getting a little faster PCI card for this computer. Here's the rub. According to the manual, there does not appear to be any jumpers whereby I can disable the SiS chipset, in order to install a card. PC Chips appears to have absolutely no interest in answering e-mail, so I'm here asking if any of you "brains" out there could tell if & how I can disable the SiS, & install a PCI card, & do you think this is feasible with this older system(I may pop a PII 450 in, which will help some I'm sure, but I would still only have 8 MB of video.(I know, buy a newer, faster computer, yes, but when I do, the kids get it). Someone mentioned I might be able to do this in CMOS, but I thought I'd ask first.
PII 350
224 MB RAM

A:Disabling on-board video

Your AGP is in most cases going to be faster than any PCI card you can put in there. Most likely it is your drivers that are in need of upgrading...maybe DirectX also. If you are intent on changing it, the setting you are looking for is probably in the BIOS. Some motherboards disable the onboard one when another one is plugged in. Look in the BIOS first.

Read other 3 answers

I am on a budget and this is the most I can afford. I want to play Crisis and many of the newer games, but I am on a budged.

I want this card:

but would it work on my motherboard:


My biggest concern is would this PCI Express x16 card work on the PCI slots of my board?

Thank you to anyone who knows for sure and posts back. =)

A:Can I use this Video card with my board??

Read other 16 answers

I have an Intel Mainboard that runs in Dual Channel configuration and uses RAM in pairs. My computer has a total of 2 Gigs of System RAM and I just found out that I have mismatched pairs of RAM in my system. Two of my strips are Corsair DDR400 RAM with 8 chips per strip and two of my strips are some generic DDR400 RAM I have never heard of with 16 chips per strip.

I have always been told that for the best performance the RAM has to be identical (ie: same number of chips on each strip and same number of chips on the front and the back of each strip). What I would like to know is how much of a performance hit am I taking with mismatched RAM in my computer?

If I remove the generic RAM and eliminate the mismatch even though I have cut my RAM in half will I really benefit from having a 'matched' set of RAM in my computer or should I leave the mismatched pairs of RAM in my computer?

Also, I have been seriously thinking about putting a Video Board into my computer. Right now, I have 72 Megs of dedicated onboard Video (it doesn't steal from system RAM).

Would I be better off spending my money to bump the RAM back up to 2 Gigs or am I fine with 1 Gig of System RAM and better off getting a Video Board with 256 Megs of RAM?

Thanks for the assist.

A:RAM & Video Board Question

Read other 10 answers

When I'm adjusting my many icons and shortcuts on my desktop, often, particularly when I change resolutions, all of the icons will bunch together in the upper left corner of my screen, requiring me to rearrange them again. As I'm dragging them to the right locations, often the mouse travels across the screen, but the image of the icon has frozen part of the way across. It has transparency. I hold my mouse in place waiting, then after some 20 to 30 seconds, the icon snaps into the new spot where my mouse cursor is positioned. Is this a video card "overload" problem? My video is on-board, as delivered in the machine.

Should I consider replacing this on-board video or do I have another problem? It's been this way since new.

A:Is this a video board problem?

Hey tepeco

Does this only occur with the icon moving? Or does it happen with anything else?


Read other 8 answers


Can an nForce220D on board Video support a DVD? I was told it could not and not to buy one because it would be a waste.

Thank you

Read other answers

I have a HP Pavilion Media Center m8430f with a NVIDIA GeForce 8500 GT video board.
While loading updates, one of which was ”HP – Display – 2311 Series Wide LCD Monitor”
My computer crashed. When it rebooted the first screen, instead of having a blue background, had a blue and white vertical lines about 3/8” wide background. The next screen was black background with letters in different colors. It next went into windows and crashed in a few seconds. There was a BOSD but it went by too fast to read.
I went into setup and changed the video setting from PCI to On Board.I used the system board VGA connector and was able to boot clean.
Is my video board bad or is there something on it that was corrupted?
Is there any way to diagnose it?

A:Video board crash

Read other 10 answers

How do I tell what type of onboard video card do I have. When I go under device manager and go too display adapters I get "standard pci graphics adapter (vga)". I am stuck at 640 x 480 and want out. I cannot get the slide bar to move. I believe I have a Amercian Megatrends motherboard. System win98se. Thaks for your help.

A:on board video card

I suggest asking a mod to move the thread to Hardware

Read other 1 answers

If the mobo has onboard video of 4 megs but allows you, in bios, to increase to 8megs, where does the memory usage come from?

By changing from 4mb to 8 mb the memory usage has to affect something else? Right? (besides the improved video)
What is or may be negatively affected?

Hope this makes sense.

A:On-board video increase

Read other 6 answers

I have an old HP Pavilion computer with an Asus Spax Motherboard. It has an on board video (card), SiS Interated video. It was working fine and suddenly disapeared. Does not show as existing in the control panel display propertys.
The display is now the native 640 x 480 VGA. Any ideas?

A:On Board Video adaptor

You probably need to update the drivers for it. Go to the HP website for your specific HP model and see what integrated SIS chip the motherboard uses. HP will also have a driver available for download which you can use. Or you can then go to the SIS website and download the latest driver which be newer then the HP provided driver.

Read other 1 answers

I want to install a new monitor but I don't know what video board to get
my motherboard is GA-990XA-UD3 (Socket M2)
please help!!!
I am using windows 10

A:New Monitor - What video board?


Read other 2 answers

I am in the process of trying to get the onboard video to work on a FIC FR33 running a 430 processor (CPU Socket 370) . I have been able to locate the video drivers online at their web site, but when I try to install, I get a message saying it cannot complete the task due to not being able to find the "setup.dll" file.

I'm trying to get the correct driver installed as the current setup only has 16 bit color at 640 x 480 resolution.(no other options)..graphics are very grainy.

We just want to use this system for online mail/ internet/MSN Messenger.

Can anyne give me some assistance in getting this driver installed? It looks like right now the system is using the standard VGA driver from Windows 98 which is not working correctly.

Thanks for the help

A:FIC FR33 On Board Video Problem

Read other 7 answers