Over 1 million tech questions and answers.

Black screen after login for some seconds, then back at logon screen!

Q: Black screen after login for some seconds, then back at logon screen!

Hi people, i've just registered to this forum to ask you about this, Since i've made a registry defrag with TuneUp Utilities (which probably has gone wrong), when i reset the computer, and I logon to my user, it shows a black screen, then back at the logon screen. If I do it again, the user doesn't show up anymore!
It happened three times already, i had to make new users, and i'm sick of it. Any ideas of what could it be?

RELEVANCY SCORE 200
Preferred Solution: Black screen after login for some seconds, then back at logon screen!

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Black screen after login for some seconds, then back at logon screen!

Welcome!

Yet another case of registry defraggers causing harm. In the future, you know now to stay far away from them.

I suggest a system restore to get to a point before TuneUp utilities. If that doesn't work, it will be time for a repair install.

Good luck!

~JK

Read other 6 answers
RELEVANCY SCORE 97.6

Windows 8 was fine. For Windows 8.1 I had Windows 8 format and do a clean install and then immediately upgraded to 8.1. Now at least half of the time when I boot up after BIOS info and the windows logo shows briefly I see a black screen for 2 to 5 seconds I'd say. Then the lock screen. So after I get to where I can input my password everything is fine.

But I can't figure out why there is this few seconds of black nothing before I can input my password. I can't see that anything is wrong.

A:Black screen for a few seconds before login

If you have a HDD drive install the windows sdk and performance tools and run a boot-time defrag.

Try the cmd below before installing sdk, not quiet sure you need it in w8

These work in 8
How to enable boot defrag of system files on Windows 8? - Microsoft Community

or

How to speed up boot process under Windows Vista or Windows 7 - Windows Tips 'n' Tweaks - MSFN Forum

Read other 11 answers
RELEVANCY SCORE 96.4

Hi all,

Trying to login on my Xp Pro,
After keying in the username and password on the logon screen, just sends me back to the logon screen. This happens after logging off from a session. The only way I can login is thru restarting the system again.

Solution is highly appreciated.

Thx.
 

A:Login on XP, returns back to Logon Screen

Read other 15 answers
RELEVANCY SCORE 95.2

Hey Guys
im only new hear,so im not sure if this question has been asked before,or even if its in the right forum.
but i recently just installed a clean install of windows 7(instead of a upgrade from my vista.i got the free upgrade),now everything works fine expect when after the windows 7 splash occurs there is about a 10 second delay were the screen is just black with a cursor. Could any of you guys be able to help me

Hear are my Pc Specifactions(copied from system information,ive left my details out of my pc name,just incase)

OS Name Microsoft Windows 7 Home Premium
Version 6.1.7600 Build 7600
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name *****
System Manufacturer Hewlett-Packard
System Model HP Pavilion dv6 Notebook PC
System Type X86-based PC
Processor Intel(R) Core(TM)2 Duo CPU P7450 @ 2.13GHz, 2133 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date Hewlett-Packard F.33, 31/08/2009
SMBIOS Version 2.4
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
Locale Australia
Hardware Abstraction Layer Version = "6.1.7600.16385"
User Name ***
Time Zone AUS Eastern Daylight Time
Installed Physical Memory (RAM) 4.00 GB
Total Physical Memory 2.97 GB
Available Physical Memory 2.20 GB
Total Virtual Memory 5.93 GB
Available Virtual Memory 5.09 GB
Page File Space 2.97 GB
Pag... Read more

A:Black Screen for 5-10 seconds before windows login scre

I really don't know what the problem is, but I would tend to suspect the video driver. I don't know anything about notebook either, but I imagine that you have onboard video. Check in the Device Manage to see what it shows for the driver for the Display Adapter, then check with HP to see what they recommend.

Read other 9 answers
RELEVANCY SCORE 95.2

To give a bit of a background - I had to change the mothboard of my system last month because of an incident of burnt PSU

Coming to the current situation - since the last few weeks, I have noticed that when I am viewing a video on fullscreen mode, I would often hear a system alert sound, like the one you get when you plug and unplug in a pendrive. It doesn't occur always though.

I immediately check the events viewer to see if it has logged anything, but no errors/ warning show up there that could describe what happened at that time.

Moreover, the screen often turns black for a couple of seconds and comes back to normal. Sometimes before it comes back to normal, I could see my screen changing to a much lower resolution and then back to the original one.

Again, nothing related to graphics or monitor in the event viewer.

My system specs:-

AMD FX - 6100 CPU
Asus M5A78L-M-USB3
AMD Radeon HD 5450 GPU
Corsair Vengance - 4GB x 2
CM B500 PSU
Corsair MX-100 - 256 GB SSD
Seagate - 7200 RPM - 500 GB
Seagate - 7200 RPM - 160 GB

This didn't start happening following a clean install, btw.

I have searched for updates to my graphic drivers, but found no new updates.

The monitor is quite old though - 6-7 yrs I guess.

What could be happening here?

Many thanks

Read other answers
RELEVANCY SCORE 94.4

I have tried to make sense of what others have posted and relate it to my situation but I am still somewhat confused because I have not found the same exact issue I have. I have tried a number of config settings but no joy.

I am running W7 Ult 64bit OS and have a Nvidia Quadro NVS 285...

I am not sure how long this has been occurring (possibly since OS install) but every time I bootup and then login with my password, the screen flashes black for 2-3 seconds after the initial login. If I log off and log on with my pswd, it does not always flash.

I have the most current driver for the Nvidia card.

Does anyone know why this is occurring? Is it a typical glitch

A:Black Screen Flash for 2-3 seconds after initial login (after bootup)

Are you running multiple monitors?

What type of anti-virus do you have on your system?

From SOLUTION for Black Screen Flash After Windows Loads






Quote:
Many users here have a problem of their screens flashing (or flickering, or blinking) black after Windows loads. I've seen people blame everything from audio drivers to integrated graphics for this issue, however these are not the causes.

Microsoft has a service called Transient Multimon Manager (TMM). This (supposedly) makes it easier to run multiple displays. It also causes the annoying flash we all hate so much. It took me hours to pinpoint the exact process (which happened to be the Task Scheduler Engine), and even more time to pinpoint the exact task, so enjoy.

Here's how to fix that annoying black flicker on boot:
Click on the Start button (pearl? ball? orb?).
Type "Task Scheduler" and hit Enter.
On the left-hand side, click "Task Scheduler Local" (you should already be there, but just in case).
Expand "Task Scheduler Library," then "Microsoft," then "Windows," then click "MobilePC."
Up top, you'll see a task called "TMM." Click it, and on the right-hand side, click "Disable."
You're done.

Read other 6 answers
RELEVANCY SCORE 94

My screen will sometimes go black for a few seconds and the sound stops, but when the picture come back the sound doesn't. This only happens if I'm using my monitor, connected by as my default sound device but when I use my headset that is connected by optical wire there is still sound, when switched back to my monitor there is still no sound. The problem also makes it so that I can't make my hidden taskbar rise when I mouse over it when I'm on the Chrome window, although I can still get to the taskbar by pressing the Windows button on my keyboard. Restarting is a temporary fix, although whenever it turns off it gives me a notification about "Waiting for explorer.exe to close" (picture of message) then I have to click a button to force close that program. My computer closes it automatically when my headset is set as my default sound device.
This problem has only ever occurred when I play League of Legends, but for the most part I'm playing League when on my computer.
System specs:
OS-Windows 7 Home Premium 64bit
GPU-Nvdia GTX 760
CPU-Intel i5 4690k
Motherboard-Gigabyte Gaming 3
Power Supply-600W Bronze
RAM-8GB
Monitor-BenQ GL2450

Read other answers
RELEVANCY SCORE 90.4

I have an Acer aspire 3 that I lent to a friend over the weekend. When I got it back today I tried to log in to my computer profile and the screen turned black then flashed on and off for a few minutes before kicking me off back to the login startup screen. It?s done this every time I try to log in. The first couple times there was a box of red diagonal lines that persisted on the screen as well, but that has stopped. Any suggestions? I can?t seem to stay logged in long enough to do a factory reset.
Thanks,
Keefe
 

Read other answers
RELEVANCY SCORE 88.4

Well i found out it was my graphics driver intel accellerator could any oen assist me how to fix the black out becuase it gets on my nerves and that is not how my computer acted before and i wont the driver to work correctly in the right way i wont could any one help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Thanks

even just reinstalling wont fix it or updated to the latest still the same theres got to be another way my system is a acer aspire 5735 4gb ddr2 ram 160gb hard drive intel core 2 duo t5800 2.0ghz [email protected] accellarator 4 express chipset family driver
 

Read other answers
RELEVANCY SCORE 86

Hello friends, I recently got the Gnome desktop environment on the Ubuntu Software Center, and I used the gdm and startx command as said by another forum site. Nothing wrong, they said to logout, tried to login again, goes to a black screen and sends me back to the Ubuntu login screen. Tried again, same result, panicked. Looked up video tutorial on how to fix it, they said to access the control panel via ctrl-alt-f1 or f2, went to a black screen, no text at all, computer runs fine, no crashing. Is there a special way to access the terminal in a System76 computer, I really don't know very confusing? Is there a way to login with the guest session? I use Ubuntu 15.10 Wily Werewolf on my laptop. What causes this, I read on Ubuntu forums it's driver issues with Ubuntu and Nvidia, but I have my suspections with the Gnome desktop environment.
 

Read other answers
RELEVANCY SCORE 83.6

Hey I need immediate help!

It's my sis' previously-formatted HP Pavilion dv5201tx! The problem is as the title above. I can go into safe mode. I've used system restore twice. And in Documents and Settings folder I noticed it has:

Administrator
Administrator.computer description name
Administrator.computer description name.000
username1
username2

Is it creating more user folders? At some point Administrator.computer description name.000 wasn't there. Corrupted registry hive? I'm not sure! Restarted many times, used Last known good configuration, and it's still black after the boot screen. Please help quick, she uses it a lot. Thank anybody so much..
 

A:Black screen after boot screen, no welcome screen, no logon screen

Read other 6 answers
RELEVANCY SCORE 82.8

A few times now I have been in internet explorer and then the screen with go back and forth from black screen back to internet screen and back and forth between the 2 for a few minutes and then will hit me with a blue screen with a bunch of writing on it and then will restart. It seems to run fine after the computer restarts itself but this has happened a few times now!
 

A:Screen flips back and forth from black screen to normal then blue screen

Welcome,
Can you provide a few details [remember we can't see or touch your system] about the hardware and software?
Thanks

Read other 3 answers
RELEVANCY SCORE 82

Hi, please i need help.
i just installed some updates on my windows 7 Dell Laptop, which the updates includes: Microsoft Essential and i updated my vlc. later on i did restart and after welcome screen i just saw my laptop black out with mouse cursor. i thought it will just be for
some minutes or maybe due to some changes i just did. but it was all like that for more than 30 mins. it was so really frustrating, i wanted to browse to do some work i couldn't do anything again i have to stay awake for two hours shutting the laptop down
and booting again still  the same thing.
after on i tried to boot in safe mode, which was successful but i realized that some of my softwares would not open, i shutdown again to boot to normal windows thinking maybe is because i boot in safe mode. it was so worst in normal windows. still on black
screen but it didnt last long for 15 mins and the desktop background came up. i was happy  but still my softwares like browser, corel and some other apps will not open, i decided to uninstall the vlc again, but showing me you dont have sufficient permission
to access the application please contact your computer administrator. i was just helpless.
the screen task bar atimes turned to white if i restart the windows or shut it down and put it on again. but windows media player works perfectly i can watch film and i can scan with the Microsoft Essential. i checked the settings to see maybe is the Microsoft
Essential i downloaded that deni... Read more

Read other answers
RELEVANCY SCORE 81.6

After installing the latest NVIDIA 182.50 Drivers for my 8500 GeForce 8500GT card on my Gateway AMD x64 with Vista Home Premium 64bit, now at start up the Boot screen doesn't come up and neither does the Vista green loading bars, just get black screen, no signal until the Vista Logon screen appears. I used to get the Boot screen with F10 boot options and F2 BIOS options and the Gateway Logo, but not anymore.

Any idea why and how I can get the boot screen back ??

Read other answers
RELEVANCY SCORE 81.6

---Wow this is frustrating, I just got done fixing two other computers- one was helping someone else fix their computer, because they were seeking someone with basic expertise, and here I am seeking someone with higher knowledge to help me out! thanks in advance to all who contribute!--- HP Media Center M8330FWindows Vista 32 bit4GB RAM, NVIDIA graphics card, and plenty of HD spaceF9 hardware diagnastics: A-OK!Suddenly this computer decided to malfunction, without installing anything new, or updates prior to its "crashing." I'm pretty wary to spyware and virus of the like, so I am careful to what is installed and opened on this computer. But for all I know, when I was out of the house someone could have accessed the the machine, infecting it with something. I noticed before I left the house that it took a ridiculously long time to empty out the recycle bin (has anyone else had this problem in vista?). I know there were a lot of high res pictures in there, so I'm guessing quite a few gigs of deletion, but after an hour it hadn't even progressed. It said 13 minutes and appeared to be frozen, but was still moving. I restarted the computer and tried the same thing-- exact same result. <--- this is the only hint I have as to what happened, because before this everything was fine!Anyway, I got home and turned on the computer (after someone turned it off) and it just booted up the HP screen and then went to the windows logo loading page, except t... Read more

A:Windows Vista black screen, no bootup logon screen

It may be that someone didn't turn off the PC rather that it experienced a damaging event and shut down.Suggest you check the RAM - remove and reseat and try rebooting. If not successful your mother board may be damaged - nasty thought.There is also this site which may be relevant.http://support.microsoft.com/kb/831515If you can get your PC going suggest you check Event Viewer. Then restore files from the recycle bin and then use SHIFT/DELETE to get rid of them, delete a small file and see if emptying the recycle bin works OKPaul

Read other 4 answers
RELEVANCY SCORE 81.6

I cannot get to my desktop as this black screen is preventing me to do so.

It doesn't even give me enough time to log in!
It happened once before but it magically started to work the other time.
This never happened when I was still using the stock 640GB HDD that the laptop came with. So maybe I'm thinking it's because of my SSD having problems?

Fortunately, I can still get to Safe Mode and it says I got a BSOD and here's some details that it showed:

BCCode: d1
BCP1: 0000000000000010
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF8800170F5D6

I went to Event Viewer and took a look on what made my computer mess up and it says that winlogon.exe and Explorer. initiated the restart of my computer and said there was no reason for it.

A:Black Screen appears 2 secs after Logon Screen shown

This will probably be moved to http://www.sevenforums.com/crashes-debugging/.

Follow http://www.sevenforums.com/crashes-d...tructions.html to provide us with more information to better assist you.

Read other 9 answers
RELEVANCY SCORE 79.2

Hi Everyone.

As the title says about, i have a Dell Vostro 1520 and im running Windows 7 with a 32bit. It is only 2 years only. It started about a month ago. I was on my laptop viewing and deleting some unwanted photos i had. A few minutes later i realized that i deleted a photo that i wanted. So i went to the recycling bin and restored that photo. When i went back to my photos and went into the album, it said something like i do no have permission to access this folder. Please press continue to get full permission. I clicked continue and i got the access i should have. Now i tried many more random folders and the same thing happened. Also when i came out of the folders, the folders had a big pad lock sign on the front of it. After that i shut down the laptop and went to turn it back on. The laptop will power on like normal. I can press f12 for the boot options. which i have already tried many times. I also tried it in safe mode and what-not, but still nothing. I can hear the fan and stuff spinning up like normal. I have also put and CD into the CD ROM and that spins up fine. So after the Dell logo on the screen, it goes black and stays that way with the cursor. You can move the cursor around no problem. I should also add that the battery light is and has been flashing for a good wile. Its flashing orange and blue. I'm wondering if this has anything to do with the battery. Because my laptop will not charge with the AC adapter in it for many months now. It will only stay... Read more

A:Dell Vostro 1520. Black screen. Wont reach login screen

Since its a laptop the harddrive is easy to pull out and remove.If you have or can get a usb sata/ide connector hook the drive to that and then to another computer if you have one so you can save all of your important data like pix, music, etc.The laptop battery is going to have to be replaced since its no longer charging properly.It sounds like there might be a short somewhere or a power supply problem along with a bad battery.Or possibly something might be wrong with the screen or video or graphics card.
 

Read other 3 answers
RELEVANCY SCORE 79.2

hello for all, yesterday when i was making log out from my computer, there is no log out screen!! just black screen and mouse cursor, and when i did restart again , no logon screen appears or no any thing in screen , just black screen and mouse cursor too.

I was tried every thing and no difference :
safe mode
startup repair
restore to some point (i dont have a point)
upgrade windows or reinstall it

i think the things maybe was made this poblem are :
i was edited userinit.exe value from registry by deleting the comma from the end of its value.
i used Windows 7 manager to make some clean and fixes some things on computer.


any help please??

Iam a programmer and have alot of projects and i cant access the

A:no logon screen with black screen and mouse

Why is my screen black when I start Windows 7&#63;

Windows 7 Black Screens of Death for Some AMD/ATI GPUs - Softpedia

windows 7 black screen after login, no desktop show up

Windows 7 Loads to a black screen. Whats the - Microsoft Answers

Read other 3 answers
RELEVANCY SCORE 79.2

Hey everyone.

I did a bit of research and this seems to have been an issue for a while, or has been in the past. Was upgrading to windows 10, I first had to restart my pc cause it was initially stuck on that preparing to install problem with the green bar being stuck around 25%.

It then got through that and began the installation process with the big circle and rebooting process. However around 91% when I last looked at it it was just black screen, this stayed this way for about 3-4 hours. I then decided to reboot the pc and it has now booted to the login screen. Is this a known bug or could there be a possible issue?

The problem seems a bit different as some people I saw have had to fall back on PC restore points etc. So not sure if it installed or what could be the problem.

Also side note, I upgraded my pc when windows 10 first publically released, but rolled back because I had about 5min shutdown times. So not sure what is going on and any info would be greatly appreciated!

Thanks!

A:Black Screen of Doom but Booted to login screen (no cursor just blank)

I never had a problem upgrading like you've experienced but I experiencing Windows 10 upgrading process is the longest time taken ever compared to previous versions. It took me 1 hour+ to finished.

Play around a little bit to get used to it then did a clean install. No problem arise, seems working fine.

The point is, problems always happen after upgrading, to solve it just perform installation from scratch (clean install).

Read other 0 answers
RELEVANCY SCORE 79.2

Hello, originally my problem is that my internet browsers (Internet explorer, firefox) can not display any kind of pages because of some kind of virus. Also I had some kind of fake Microsoft Security Essentials (MSE) asking me to download more fake AV's onto my computer but I knew well enough that it was fake so I close it. This also shows up in safe mode. MSE block me from opening things such as iexplorer.exe or sometimes it would say tskmanager is a virus and it wouldn't let me open anything. So eventually I google this up, and I read somewhere that told me to rename hotfix.exe to hotfix1.exe when I run %APPDATA% so the annoying MSE would stop showing up. It also told me to update my Malwarebyte which I still can not do because I still do not have access to the internet. By the way I am using another computer to type this. So again, I tried to do some more research to fix my internet problem and I found this site that told me to download KillGodzilla.exe and run it and reboot my computer, after that I should update my Malwarebyte but of course, I can't do that because after the WINDOWS loading screen, the blue log in screen doesn't show and displays a black screen which flickers sometimes, after a few minutes it would restart my computer. Also same thing for safe mode. Does anyone know what is going on? Did I screw up my computer to badly? Do I need to reset my BIOS? I am using Windows XP if that helps. I also hav ESET smart security on my computer but I can... Read more

A:Computer blue login screen displays black screen after using KillGodzilla.exe

Anyone have any ideas at all? I waited a few days, and gave as much information as possible already, please?

Read other 1 answers
RELEVANCY SCORE 79.2

Hi, I have an office desktop pc (HP COMPAQ ELITE 8100) running 64-bit Windows 7. I was manually running Windows update and manually updating some of my drivers when the pc suddenly turned itself off.

I turned it back on and now it doesn't get to the login screen anymore. It just displays a black screen with a movable mouse cursor although I can't really click anything or even press any keys on the keyboard.

I tried loading into the recovery environment but it only gives me the option to restore my hard drive to factory settings, which I don't want since I have lots of important files in it.

I've searched around the forums but I can't find a problem that is EXACTLY like mine.

By the way, my pc is on a dual boot mode with an Ubuntu 11.10 and that is how I'm able to access this forum right now. The dual boot was set-up by the employee that I replaced so I have no idea how this is set-up.
Any help would be appreciated!
-Ron

A:Black screen with movable mouse cursor before login screen appears

Firstly, boot into the Linux operating system, and then create a backup of all important files and data.

Read other 5 answers
RELEVANCY SCORE 78.8

Hi,

I updated my ATI HD 5770 drivers today, and rebooted. Afterwards, the login screen sound played, but nothing was visible.

I booted into safe mode and deleted the video drivers and attempted to install some working ones - the same issue occured (Windows Update).

Can anyone give me a hand in finding the correct drivers to install?

Windows 7 HP 64 Bit
ATI Radeon HD 5770

Cheers :)

A:Video card drivers - black screen on login screen

Resolved. I was a retard and didn't realize it was showing the desktop on my TV which was on a different display.

Read other 1 answers
RELEVANCY SCORE 78.8

Thanks for all providing valuable suggestions in my previous thread Win 7: Black screen on boot up, before login screen?

As I am picking the clean install option for my resolution, I am opening this new thread.

I reviewed the tutorials (Macrium) of this community. I found Macrium Reflect Free (Version: 6.0.753 (21 July 2015)) for download.

I downloaded/installed above Macrium to working PC. This version has an option to create Macrium Reflect rescue media on CD, DVD, or USB stick upon installing on working PC. I created a rescue media USB.

I created complete HDD image of my unbootable (Z580), before doing clean win 7 install. I am going to clean install Windows 7 Home Premium (64 bit) using my OEM KEY.

I posted the OEM DISKMAP in my previous thread Post # 90

I find System (d:\) 200 MB Windows_7 (OS) ( c:\) 653.44 GB & my Lenovo_data (e:\) 25.47 GB. Lenovo says, if I change the partition configuration, it will make built-in Lenovo recovery unusable.

I like the idea of adopting infrequent system changes (adding new programs etc) and frequent data changes (growing user documents) in image backup strategy. I mean taking system partition (d:\ + c:\) image back up as and when I add new programs and taking data partition (e:\) image backup periodically.

How do I re-structure my DISKMAP to have effective periodical image backup without disrupting built-in Lenovo recovery?

Are there any Windows 7 disk partition recommendation/guidelines?
Thanks for sharing/h... Read more

Read other answers
RELEVANCY SCORE 78.8

Hey, need some help yet again!

Yesterday, I downloaded Mission Against Terror (New MMOFPS), and I downloaded it. Upon updating with the patcher, my laptop went haywire. It started opening up random IE windows, slow speed, etc etc.

I did a whole memory scan, and a malware/adware/spyware scan. There were several viruses and whatnot, but what is important are the files: SVC2.exe and 2008.exe, you'll find it why later on. The anti-virus said that it had fixed/deleted everything.

So, I restarted my laptop, hoping that I'd get it up and running in safe mode for any further scans. Unfortunately, when I restarted it, after the windows 7 loading screen (which is right before login screen), a black screen appeared. With nothing at all. Not even a cursor. BLACK. JUST BLACK with NO keyboard access/mouse access. But, that's expected since it's BEFORE the login screen. It's the same with normal boot, boot that does that "last best used option" or whatever, safe mode, with networking, etc etc. All the same. Black screen.

Good thing I had WIN XP on my other hard drive. So, I booted up into WIN XP (where I'm posting this from), and did a FULL (NOT QUICK) system scan, to find the SAME Viruses YET AGAIN: SVC2.exe and 2008.exe, along with some other minor tracking cookies and what-not. Win XP (on second drive) is also having a few problems, like IE shutting down every second (using firefox now). Think this is a whole system prob. But, why? Didn't the antivirus-es fix it? I... Read more

A:Black Screen BEFORE Login screen and AFTER Windows 7 logo/loading!

Hi your problem can best be addressed in the security section of the forum
http://www.techsupportforum.com/secu...oval-help.html

Read other 3 answers
RELEVANCY SCORE 78.8

Hi I would really appreciate any advice i've been trying to fix for four hours without any luck.

I have an Acer aspire 5732Z. I turn my laptop on and it shows the starting windows screen then just goes to a black screen with a cursor. I tried to do systems restore but it said that i did not have a system restore point. I cannot start in any safe mode.

I have all my pictures, uni work etc and im terrified i've lost it all. I've only had the laptop a year.


Any suggestion would be amazing


Thank you

A:Black screen after windows start up doesn't go to login screen

Hello seven11 and welcome to SevenForums!

I think this article will be fairly interesting to read.

Why is my screen black when I start Windows 7?

Carry on.
Frederik

Read other 1 answers
RELEVANCY SCORE 78.8

Hello, I'll go ahead and start from the very beginning. Thanks in advance though for taking a look at my problem.

About a month ago, my computer would give me a few problems while booting up. I would start the computer, it would run through BIOS, run through the Windows loading screen, and after that it would run the CHKDSK to make sure my disks are fine. CHKDSK doesn't work, it just freezes right before checking the disks, so I restart and generally it will boot up. Most of the time it would boot up perfectly, but rarely would it go to the xp loading screen and then flicker as if it as going to go to the windows login screen but wouldn't. The screen would just stay black and I'd have to restart. Next time, generally it would work perfect.

So this brings me to the current day. After the windows xp loading screen, it goes black. The computer is on, but I don't see any activity for the HDD via the LED. SO i go into safe mode, i finally get CHKDSK to run, I had to really mess with some stuff to get that working. Windows says the volume is fine, and the only way I can boot my PC is in safe mode, but even that will freeze sometimes while loading some of the files.

Just to let you know I'm running Raid0, and this is my first time running it. I'm not sure if this symptom is a common problem if one of the disks are going out. Does anyone know whats going on? Could it be a virus that messed with a boot.ini or any startup stuff? also, is there anyw... Read more

A:Solved: Windows Cant boot, black screen before login screen

Read other 16 answers
RELEVANCY SCORE 78.8

The issue started a few hours ago when I was playing League of Legends, specifically when the game has finished its loading and crashed to Desktop which is a common problem on my laptop. As usual I would restart the game, but before I could do that explorer.exe crashed, my entire Desktop has turned to the familiar transparent whitish filter before the "Explorer.exe has crashed" message popped out, which was peculiar at the time because this is the first time it had happened.

So I allowed the program to restart, it didn't. So I shut down via holding down the power button and rebooted the laptop. It went into Startup Repair, and did its automated repair, so I let it repair while I did my stuff. When I returned, the repair had completed and it booted the laptop into the infamous Black Screen of Death with a movable mouse cursor. This is right before I could log on to my user account, and I decided to search for solutions initially on Google using an available PC.

Most of it didn't work, for starters, booting up to Safe Mode, Safe Mode with Networking and Last known Good Configuration brought me to the same movable mouse cursor with black screen combo. Safe Mode with Command Prompt has the same problem, and the Command Prompt does not appear.

After which, I accessed the Repair menu with the F8 button right after the BIOS loads and tried every option. First, Repair Your Computer did not work as it couldn't find any problems after the first initial repair it did. Syste... Read more

A:Black Screen of Death with Mouse Cursor before Login Screen

having the same problem here on my toshiba satellite L655-1je laptop. did everything srwalpha did but to no avail. hence, bumping this up for help pls...

Read other 8 answers
RELEVANCY SCORE 78

Hello I hope someone can help me out with my problem.

About the problem.
Yesterday I did a shutdown from the start menu and turned off my monitors, however the computer did not shutdown and was still on after 10 minutes so I just turned it off with the power button.
Today I started my computer it boots I get the usual loading bar and then a black screen and not my welcome screen.

So I have tried the following to fix it:
I tried booting with last known configurations, and got the same problem.
I tried booting in safe mode, it loads for about 5 minutes and then just stops loading.
I tested the memory with a memory test from Acer, no problems found.
I tried booting with a lower resolution, get the same problem.
Just to see if its not a hardware problem, I have booted a linux live cd and that worked.
I have an acer recovery menu but it wont let me recover to a previous point.
And I don't have a vista CD or recovery disk.
I think it was updating when I shut it down..

So i hope anyone has a solution for my problem, if you need more information please ask and I'll answer.

Many thanks for reading and maby even replying to my problem.

Greets,

NiJor


EDIT:
Somehow after waiting an hour doing nothing then rebooting into safemode worked!
There i could do a system restore and problem is solved!

A:Vista boots to black screen instead of login screen

See if there is information on that PC on making recovery disks. I just used 2 dual layer DVD's to make recovery disks for a Compaq laptop.

Also, next time your machine boots to a completely black screen....let it stay there while it re-configures it's self. Don't be so impatient

Read other 1 answers
RELEVANCY SCORE 78

Hey. First, I posted this in the Win 7 section, but someone suggested that I post it here since it involves malware/a virus. So, here's the post from over there:

Yesterday, I downloaded Mission Against Terror (New MMOFPS), and I downloaded it. Upon updating with the patcher, my laptop went haywire. It started opening up random IE windows, slow speed, etc etc.

I did a whole memory scan, and a malware/adware/spyware scan. There were several viruses and whatnot, but what is important are the files: SVC2.exe and 2008.exe, you'll find it why later on. The anti-virus said that it had fixed/deleted everything.

So, I restarted my laptop, hoping that I'd get it up and running in safe mode for any further scans. Unfortunately, when I restarted it, after the windows 7 loading screen (which is right before login screen), a black screen appeared. With nothing at all. Not even a cursor. BLACK. JUST BLACK with NO keyboard access/mouse access. But, that's expected since it's BEFORE the login screen. It's the same with normal boot, boot that does that "last best used option" or whatever, safe mode, with networking, etc etc. All the same. Black screen.

Good thing I had WIN XP on my other hard drive. So, I booted up into WIN XP (where I'm posting this from), and did a FULL (NOT QUICK) system scan, to find the SAME Viruses YET AGAIN: SVC2.exe and 2008.exe, along with some other minor tracking cookies and what-not. Win XP (on second drive) is also having a few problems, like... Read more

Read other answers
RELEVANCY SCORE 78

Hello,
Recently my pc just showed a black screen when waking up from sleep, and i had to restart the pc to get to the login screen. Today the same thing happened, but now i cant get to the login screen even when rebooted.

I have rebooted approximately 20 times, booted in both normal safe mode and safe mode with networking, yet still get black screen. I have tried booting from EFI Device (standard), Hard Disk and CD&DVD with no results. I have also tried going back to an older version of the pc (recovery), but it failed and couldn't load the recovery save.

The pc is old, from 2011/12 i would guess, runs with 8 GB DDR3 RAM, i5 2320 Quadcore CPU, 2 TB HDD and some Acer motherboard (Acer Predator G3610 i believe, not sure). The original GPU was a Radeon, but after about 2 years i switched to a Nvidia GTX 970 (MSI), and had no problems whatsoever. Could it potentially be a faulty GPU? I would find it hard to believe the GPU would break overnight, considering i played 6+ hours of CS:GO yesterday with no problems.. and well.. how does a GPU break overnight when not turned on?

Anyways, any help here is very much appreciated!
 

Read other answers
RELEVANCY SCORE 78

Hi People!!

I have been a member of this forum and most often I have found a solution by just searching but today I have a problem which I have not been able to find a solution for, therefore I am listing my problem.

I have Windows 7 installed on a desktop since 3 months now, it was working fine till yesterday evening but don't know what happened, it was loading windows.

Basically what is happening is that it is booting fine, then the windows logo comes and after that I get a black screen with mouse cursor, whereas it was supposed to have the login screen.

Now I had this same problem 3 months back with the same computer but then I was unable to solve it using the MBR repair commands and so I formatted the drive C of my computer then.

Now I am determined not to format the DRIVE C, so I went to the command prompt using system repair tools from the DVD and went into DISKPART. When I selected disk 0 which is the only disk installed and entered detail disk this is what I got:

Disk ID= SOmething
Type=ATA
Status=Online
PAth=1
Target =1
LUN ID=0
Location Path= Something
Current Readonly State = No
Read Only= No
Boot Disk=No
Pagefile Disk = No
Hibernation File Disk= No
Crash Dump Disk= No
Clustered Disk = No


-----------------------------------------------------------------------------
Volume|#| Ltr | Label1 | FS | Type | Size | Status|
Volume|1| C | System Rese | NTFS | Partition | 100 MB | Healthy|
Volume|2| D | | NTFS | Partition | 48 GB | Hea... Read more

A:Black Screen with Mouse Pointer instead of Login Screen

Have you tried Startup Repair from the Win7 installation DVD?
Have you tried System Restore to a point in time before these errors occurred?

Read other 1 answers
RELEVANCY SCORE 78

Hi there, I hope everyone is well.

I have a strange issue that started happening recently. System restore doesn't help as it happens with multiple machines.

I have a lobby display running from TV via HDMI to EXTRON to Ethernet and back again to the computer in the server room. I have had this setup for a little over a year now working just fine. We recently got a new computer (We lease) for the lobby display and after setting it up, I only see a black screen with a white cursor. I have troubleshot this a little too much that I am now not sure if it's a windows update, video card update, or possible the EXTRON. However, when hooking up a laptop it works just fine as it should.

Please note that I can see post boot and the CTRL ALT DELETE screen just fine, but once logged in I just see cursor. If someone moves cursor I can see it from the lobby display. If I uninstall the video card driver I see everything perfectly fine but when running presentation it's not focused for obvious reasons, so I can't leave it like that.

I have used a Desktop with AMD and latest drivers as well as down graded drivers, issue still is present. I use an older nvidia card FX570, same deal with drivers, still the issue is present. I use a new computer with a new nvidia card, and it works. but unfortunately we do not have any of those available and that's a really expensive machine.

here is where it gets even more strange;
If I hook the computer up directly to the TV and not behind the extron devi... Read more

Read other answers
RELEVANCY SCORE 78

I'm having a weird problem. My laptop will show a black screen when booting. It seems no matter how long I wait, nothing happens. When I attach an external LCD to the laptop, it shows the Windows load or Windows resume graphics on the external monitor, but not on my laptop screen. As soon as the Desktop Screen with the Windows Login appears, it then appears on my laptop as well.

I also can't seem to get to safe mode. I push f8 and it never comes up I haven't installed any new software or hardware to cause this.
Any thoughts?
 

Read other answers
RELEVANCY SCORE 78

Apologies if this is in the wrong section.

I have a Dell Inspiron 1750, and the owner said that his son installed BearShare and it's been giving him complications. He told me it sometimes freezes when he tries to start the computer, and has to give it a hard shut down. I (hopefully) removed BearShare with Malwarebytes and MSE, yet I can't seem to find why it's not letting me boot up regularly.

It boots into safe mode fine, and I can access everything from there, but when I try to restart into regular mode, it just hangs after 'Starting Windows' with a black screen and active mouse cursor. I've tried various tutorials from searching "black screen, active cursor", "laptop frozen after starting windows" etc, but nothing that I try works.

After a few hours of research I keep seeing the reoccurring phrase 'shell', I believe it's not being loaded correctly or at all. I've tried a fix by Prevx that said it would fix the black screen to no avail.

But here's the funny part. Sometimes it boots to Windows fine and everything acts as it should. There's been several times I was about to call the guy and tell him that the laptop is finished, but I hesitated and restarted just to see if it was fully fixed.

Vid: Dell - YouTube

Let me know if I need to post further information.
-Dustin

A:Black screen, cursor active before login screen.

I would try some more scans to be sure
Anti-rootkit utility TDSSKiller
Windows Defender Offline
run some hardware tests
RAM - Test with Memtest86+
and when you can get it to boot
Disk Check
a system file check
SFC /SCANNOW Command - System File Checker
and have a look through these handy tutorials
Troubleshooting Windows 7 Failure to Boot
Startup Repair
and if all else fails
Repair Install

Read other 9 answers
RELEVANCY SCORE 78

Hi all,

this is my very first forum post here, few people have recommended this site as a best W7 community on the internet.

I have problem with black screen(lag) between windows starting message and login screen, lag is about 10 seconds and its very annoying, here is the video so you can see the problem:



maybe this is normal? i have this install almost two years, i dont have to much programs, and i disabled almost all useless startup programs. I tried also disabling bootscan in my NOD32 antivirus but nothing changed.

Is there any solution for this? and can i post to you some logs or something?

Best regards

A:Black screen between Windows starting and login screen

It is Dell's factory install? Usually it is bloated up with some services and programs those are not needed. So you need to clean them up. Follow this guide:
Clean Up Factory Bloatware

Read other 2 answers
RELEVANCY SCORE 78

Alright, today I hibernated my computer (I usually hibernate) left it for an hour and attempted to turn it back on, now it loads fine but once it gets to the point where it should display the vista logo and then the log in screen the screen goes blank. The hard disk light is blinking fast so fast it's almost just staying on and the wireless does its blinking patterns as if it's redying the wireless connection but the screen remains black. I've tried safe mode, same result. Two screens, same result. I booted Ubuntu and it was fine so I'm using that now.

First of all, any insight into how I should go about fixing this?
If not, I have extremely important files on the hard drive is there any way you could recommend getting them back?

Thanks for any help, I'd hate to have to take it in and risk the guys at the store deciding it's easier just to wipe the hard drive or something.

A:Screen turns black before reaching the login screen

Are you using a Ubuntu Live CD, or are you dual booting?
If you're dual booting, you can access your ntfs partition from Ubuntu using steps listed on many many web sites: http://www.google.com/search?hl=en&q...earch&aq=f&oq=
Some are easier than others.

As for fixing your Vista. I have reservations because in some of my steps Vista has this nasty habit of overwriting the master boot record with its own without warning you (making you unable to boot into ubuntu if you dual boot), so research some more, and proceed with caution. If you boot into the Vista DVD, I think you can click repair, and you have a bunch of options and it looks like this:
http://neosmart.net/wiki/download/at...eryOptions.png
I haven't tried them in a while so I can't really recall what each does.
You can try going back using a restore point. Be VERY cautious with "Startup Repair". I think that's the one that rewrites the master boot record. (if you really need to try it, research how you can backup the master boot record in ubuntu, then restore it if needed - usually a flash drive, a floppy, or a bootable CD may be needed - you most likely would be able to do it from the live cd if you know the steps though).
And if all else fails, do a repair install. Can't recall how it's done, but there are many sites dedicated to that topic. You can also ask around the forum about it.

Read other 2 answers
RELEVANCY SCORE 78

So I've hit this issue where I am welcomed with a black screen which is supposed to be my login screen. It boots up, but what would look like the login screen is simply black. When moving the mouse, the cursor would emerge whilst changing from pointing to loading(cursor animations). The wifi icon from the lock screen seems to flicker sometimes but that's pretty much it, nothing could be done from my end.
I've tried resetting/restoring from the advanced boot options(triggered by constantly interrupting the bootup process) but it's telling me it cannot be done since the location of the OS is not "unlocked". Safe mode with networking/command prompt gives me the same result. Unfortunately, I do not have a system restore point nor a system image to use. The command prompt from within the repair does not let me use sfc /scannow, too.

Brief history of what happened beforehand:
I installed the Uxtheme patcher to enable third-party themes, then before rebooting installed an application called StartIsBack. After rebooting, it seemed fine and I changed my mind and decided to uninstall StartIsBack. It turns out the aforementioned program brings a cavalry of bloatware before you could uninstall it. After I got rid of the extra software it came with, I proceeded to delete each part of StartIsBack from its respective directories, but it wouldn't let me delete its core StartIsBack64.dll, because it is running in the background. There is no sign of it as well within the task manag... Read more

A:Windows 8.1 Black screen prior to login screen

Try this tutorial: Repair Install Windows 8

Read other 2 answers
RELEVANCY SCORE 78

Background: A week ago on vacation, I opened my HP Pavilion dv7-2173cl (a laptop running Vista Home Premium SP2) and suddenly, green and black lines began forming across its screen. I was later told this was a pressure crack, although that is not what I'm posting about. Freaked out, that day I turned the computer off and on several times using only the power button, once foolishly interrupting a "Startup Repair" process.

Problem: When I got home I hooked up the laptop to my TV so I could see what was going on. After attempting to turn it on many times, I eventually got the BSOD with a STOP:0x0000c1f5 error. I couldn't access the Recovery Module (even to backup) or Safe Mode. Going into personally uncharted territory, I booted from a Linux System Rescue CD to delete the $TxfLog file that was apparently the cause of the problem. I no longer get the BSOD, I get a black screen (KSOD?) (sometimes w/mouse, sometimes w/o) after the "yellow bar" loading screen. I still can't get into Safe Mode but I was able to use a Vista repair CD I downloaded to (finally) backup onto an external hard drive.

What I've Done So Far: I've run chkdsk, checked the memory and hard disk from BIOS options, and run Startup repair. I did the kind of Windows backup where everything goes to one file.

I'd prefer not to start from scratch if I can avoid it. Thanks so much for any and all help guys, I appreciate it a lot.

Charlie

A:Vista won't start up, black screen before login screen.

I couldn't access the Recovery Module...Do you have a Recovery CD, Windows Vista CD, or Recovery Drive (partition)?What happened when you tried to access it?------------------------------------------------------------You said that you were able to backup onto an external harddrive, so important data is safe.The best option right now would probably be to re-format.

Read other 7 answers
RELEVANCY SCORE 78

Hello. Recently had a virus and have been going through the steps here on bleeping computer to help get rid of it. The last thing I was told to do was run the farbar scan tool and to copy and paste a code and hit fix. Upon doing so the computer prompted for a restart. It now won't get to the log in screen. I've tried booting in safe mode and I've also tried last known working configuration as suggested and nothing has worked unfortunately. I was told to come here. Hopefully something can be done. Thanks a ton.

A:Windows won't get to login screen, black screen and cursor

Tap F8 at boot and select Repair Computer from the Advanced Boot Options. Do a System Restore to a date just before the problem. 
 
You cannot do the above and if you have another Windows 7 computer create a System Repair Disk. Boot and try a System Restore to a date just before the problem.

Read other 0 answers
RELEVANCY SCORE 78

Hello,

I was successfully using my PC for the entirety of this morning. After bumping my desk, the machine shut off as it sometimes does when a cable is loose. When the machine restarted, it allowed me to login and then showed me only a black screen and cursor. Ctrl+alt+del was functional. I tried system restore and system repair, both of which completed but did not have any effect. I was able to access Windows via safe mode. I removed my GPU and connected my monitor to my motherboard. The situation did not change. I attempted to boot without my main drive (SSD) by disconnecting it and turning the PC on. Instead of a login screen, I am now greeted by a flash of a BSOD before the system restarts. After running a couple rounds of startup repair, Windows has declared it cannot resolve the issue.

Any guidance will be warmly appreciated! Thank you!

Edit: after restarting once more, my bios prompted for a boot device and I was able to reach the login screen. I am now back at my original black screen problem.

A:Black Screen Upon Login Evolved into Blue Screen

Can you boot into Safe Mode at the moment? if so, follow this:

1. Download the DM Log Collector application to your desktop by clicking the link below

DM Log Collector.exe

2. Run it by double-clicking the icon on your desktop, and follow the prompts.
3. Locate the .ZIP file that is created on your desktop, and upload it here in your next reply.

Read other 9 answers
RELEVANCY SCORE 78

While attempting to restore a previous backup of my system (with Norton Ghost 15), I got an error, and the system rebooted. Upon reboot, I get the black screen of death with just the cursor instead of the usual login screen. I have tried the following thus far:
These all give me the black screen of death with movable cursor:boot in safe mode
boot in safe mode with networking
boot in safe mode with command prompt
last known good configuration

I did an initial system startup repair which went through and said it repaired it, rebooted, but no change.
I did a pre-boot diagnostic test - nothing
memory test - nothing
tried restoring from restore point, but it says I don't have any (LIES! BLASPHEMY!)
tried restoring from restore point on external disk - seemed okay, then failed.
chkdsk - found some stuff, fixed it, no change.
tried ctrl+alt+del on black screen of death - nothing
Now, I know that the hard drive itself is alright, that is, the information is still all there still. While I can't give you exact specs, I can tell you that I am on a Dell Studio XPS running Win7 home premium 64 bit. I'm at a loss as to what else to do. Despite being a black screen, with just a movable cursor, the system still appears to be running, as every few minutes, it will show the "thinking" cursor, where it shows the little circle next to the arrow. If anyone has any tips or suggestions, it would be greatly appreciated.

hugs and kisses,
Amplitude

A:Black Screen of Death during boot, before login screen

hi,

Known issue some users have it others don't did you try Why is my screen black when I start Windows 7? or this mentions a "black screen of death" fix but i would be verry carefull running executable files from unknown sources

Windows 7 Black Screen Of Death Fix

also this http://www.everything-microsoft.com/2009/12/01/windows-7-bsod-black-screen-of-death-freeze-and-potential-fix/

but it also points to external sources microsoft should fix the issue or that *.exe should be authenticode signed so you have a way to verify it's trustworthy.

Read other 4 answers
RELEVANCY SCORE 78

My son has a Toshiba Satelite P205 that he just upgraded from Windows XP Home Premium to Windows 7 32-bit. After the upgrade completed the computer booted fine. The within 20 minutes he got the BSOD and the system rebooted. Now he can't get Windows to fully start. We've tried all of the options from F8 with no success. We have the Toshiba System Recovery Disk but it won't launch. (The Boot sequence has been changed to boot from CD/DVD and then the Hard Drive.)

The Memory Diagnostic from the Windows 7 disk ran fine with no errors.

I'm thinking I might need to re-format/wipe the drive to start fresh but don't know where to obtain a boot CD(no floppy drive on this laptop). Does anyone recommend a software that I can purchase to clear everything without destroying the CD/DVD accessibility so I can then use the System Recovery Disk to put it back to the original factory Settings?

A:System goes to black screen before login/welcome screen after Win 7 32-bit upgrade

Toshiba, usually pressing F12 when the Toshiba Logo appears will get you to the Boot device menu. If not then,
Go here https://www.csd.toshiba.com/cgi-bin/tais/support/jsp/pubLogin.jsp Choose the Download Tab, No Login required, That is for the Forums.

Download the user manual and see how to get to the boot from CD/DVD drive.

The Drivers tab will show the Toshiba drivers. They are needed for Windows 7, If no drivers for WIn7, Then don't, as getting all that are needed will be a royal pain.

I've even seen certain model of Toshiba that have a XP Bios and a different bios for Vista.

Good Luck
Roger

Read other 1 answers
RELEVANCY SCORE 78

? OS - Windows 7 SP1
? x64
? What was original installed OS on system? Windows 8
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? Retail Version
? Age of system (hardware) 4 months
? Age of OS installation - have you re-installed the OS? 1 week

? CPU Core i5-3330
? Video Card Nvidia GT 620
? MotherBoard
? Power Supply - brand & wattage 300w

? System Manufacturer Dell
? Exact model number: Inspiron 660
Added Samsung 830 128gb SSD + 3TG Seagate in replaced of the original 2TB Seagate HDD.


I have tried reinstalling Nvidia drivers, currently use the older version 310.90
Previously used 314.22.

A:[SOLVED] I get black screen after coming back from screen saver/idle

The following may be helpful when reading the remainder of this post:Beta and Legacy Drivers | GeForce
Quote:




NVIDIA Driver Downloads

Advanced Driver Search

Product Type: GeForce
Operating System: Windows 7 64-bit
Product Series: GeForce 600 Series
Language:
Product: GeForce GT 620
Recommended/Beta: Recommended/Certified

Search

Code:
Name Version Release Date
GeForce 314.22 Driver WHQL 314.22 March 25, 2013
GeForce 314.07 Driver WHQL 314.07 February 18, 2013
GeForce 310.90 Driver WHQL 310.90 January 5, 2013
GeForce 310.70 Driver WHQL 310.70 December 17, 2012
GeForce 306.97 Driver WHQL 306.97 October 10, 2012
GeForce 306.23 Driver WHQL 306.23 September 13, 2012
GeForce 301.42 Driver WHQL 301.42 May 22, 2012





BugCheck 0x117
These crashes are DirectX/graphics card related. DirectX comes installed with Windows, so this may indicate Windows corruption. It may also be that you have corrupted drivers or a graphics card hardware problem.
If you are overclocking any hardware, please stop.

Run a system file check to check Windows for corruption: Click Start Menu
Click All Programs
Click Accessories
Right click Command Prompt
Click Run as administrator
Type
Code:
sfc /scannow
and press Enter
Once it is complete, make note of the message. If it says Windows Resource Protection did not find any integrity violations., restart your computer and post back
If... Read more

Read other 7 answers
RELEVANCY SCORE 78

I need help ASAP. My computer was having many issues today, so I did a system restore. When it was done, it downloaded updates, I only restored it back to yesterday. Now, when I log into my account, the screen stays black and all I see is the pointer. What can I do to solve this? The PC is shut down right now.
 

A:Solved: Screen is black after system restore and update. Set back one day, screen is

Usually, system restore is used to resolve problems like this. You might want to consider doing a clean install and see if that has any affect. Hopefully your data is saved on an external or flash drive. There's also additional options that you can find here: http://windows.microsoft.com/en-us/windows7/Resolving-stop-blue-screen-errors-in-Windows-7

-- Ryan
Windows Outreach Team
 

Read other 2 answers
RELEVANCY SCORE 78

When I'm connected to the Internet, I get the black screen with the Windows XP logo flitting about if I've been innactive for 2 mins. Can I correct it?
 

A:Solved: Screen keeps going back to Black screen with Windows XP icon keeps coming up

Only when connected to the internet?

Right click empty desktop.
Properties>Screensaver - Check what you have it set to.

Monitor Power.
Power schemes>always on.
Turn off monitor>never.
System standby>never.
Turn off hard disks>never.
 

Read other 2 answers
RELEVANCY SCORE 77.6

Recently switched from A 1050ti to a 1070 sc then back to the 1050 but now I get my motherboard splash screen than infinite dark with a back light and my cursor
 

Read other answers