Over 1 million tech questions and answers.

Windowsupdate.log WARNING: SyncUpdates failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200

Q: Windowsupdate.log WARNING: SyncUpdates failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200

Hello all,

I have a problem with Windows Update agent on Windows 7 SP1 enterprise.
We are using Configuration Manager 1606 and Windows 7 SP1 and about 140 computers works without any problem.
On the other 10 computers I got the following error message in the windowsupdate.log:
WARNING: SyncUpdates failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
WARNING: SOAP Fault: 0x00012c
WARNING: faultstring:Fault occurred
WARNING: ErrorCode:InvalidParameters(7)

I've tried several actions although none does any help. Here is the list of actions:
- upgrade windows update agent to the latest version
- windows update agent reset by this instructions https://support.microsoft.com/en-us/help/971058/how-do-i-reset-windows-update-components
- empty Temporary Internet files
- check the rules and blocked traffic on windows firewall and physical firewall between server and workstation vlan
- sfc /scannow

It looks like significant Windows 7 error, although reinstalling is not my option.

Thanks for any help!

Read other answers
Preferred Solution: Windowsupdate.log WARNING: SyncUpdates failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)


Today morning when I turn on my laptop, I got an error from Intel Rapid Storage that the laptop may fail and I must take a bacjup. I tried running Boot time Diagnostic and it gave me following message:
Error Code 2000-0151
Validation 116622
Msg: Hard Drive 0 - S/N W0VAY77L, Incorrect status = 3E 
SMART Predictive Failure.
Please guide me if HD need to be replaced. My laptop is under warranty.

A:Error Code 2000-0151 - Hard Drive incorrect status 3E Smart Predicitve Failure

Hi navedalamalam,
2000-0151 error indicates your hard disk drive (HDD) has failed and may be nearing the end of its life. Please backup the data from the system if it’s booting up. Please enter your service tag # on the link below, select the OS, then download the BIOS from BIOS section onto the system and install it. Then run the diagnostics again.
Please refer to the video in the link below for updating the BIOS.
Please let me know if this helps.

Read other 4 answers

receiving error codes when attempting to update 

Read other answers

On startup I get a popup box with "Initialization Error - error code: 0x80073b01 for MS Security Client", with a selection of choice of "OK".  This issue isn't malware related because I had an earlier topic http://www.bleepingcomputer.com/forums/t/516854/initialization-error-error-code-0x80073b01-for-ms-security-client/?view=getnewpost that was used to finish the malware removal process.  Also when I shutdown my PC, I get a message to not force a logoff because 1 of 3... updates are being installed, even though my MS Security is up to date.

A:Initialization Error - error code: 0x80073b01 for MS Security Client".

See comments by Maurice Naggar at http://spywarehammer.com/simplemachinesforum/index.php?topic=14246.0 .

Read other 1 answers

On booting PC, I get an error box with the above message.  Outlook comes up OK but not IE.  I also get that when I attempt to run Microsoft Security Essentials.  How do I correct this issue?
DDS (Ver_2012-11-20.01) - NTFS_AMD64
Internet Explorer: 11.0.9600.16428  BrowserJavaVersion: 10.45.2
Run by Baltz at 12:06:42 on 2013-12-08
Microsoft Windows 7 Home Premium   6.1.7601.1.1252.1.1033.18.6057.3743 [GMT -6:00]
AV: Microsoft Security Essentials *Enabled/Updated* {641105E6-77ED-3F35-A304-765193BCB75F}
SP: Windows Defender *Disabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
SP: Microsoft Security Essentials *Enabled/Updated* {DF70E402-51D7-30BB-99B4-4D23E83BFDE2}
============== Running Processes ===============
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\svchost.exe -k RPCSS
c:\Program Files\Microsoft Security Client\MsMpEng.exe
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\svchost.exe -k LocalService
C:\Windows\system32\svchost.exe -k netsvcs
C:\Program Files (x86)\Common Files\logishrd\LVMVFM\UMVPFSrv.exe
C:\Windows\system32\svchost.exe -k NetworkService
C:\Windows\system32\svchost.exe -k LocalServiceNoNetwork
C:\Program Files (x86)\Common Files\Ado... Read more

A:Initialization Error - error code: 0x80073b01 for MS Security Client

Hi there,my name is Marius and I will assist you with your malware related problems.Before we move on, please read the following points carefully. First, read my instructions completely. If there is anything that you do not understand kindly ask before proceeding. Perform everything in the correct order. Sometimes one step requires the previous one. If you have any problems while following my instructions, Stop there and tell me the exact nature of your problem. Do not run any other scans without instruction or add/remove software unless I tell you to do so. This would change the output of our tools and could be confusing for me. Post all logfiles as a reply rather than as an attachment unless I specifically ask you. If you can not post all logfiles in one reply, feel free to use more posts. If I don't hear from you within 3 days from this initial or any subsequent post, then this thread will be closed. Stay with me. I will give you some advice about prevention after the cleanup process. Absence of symptoms does not always mean the computer is clean. My first language is not english. So please do not use slang or idioms. It could be hard for me to read. Thanks for your understanding.   Scan with FRST in normal modePlease download Farbar's Recovery Scan Tool to your desktop: FRST 32bit or FRST 64bit (If not sure: Start --> Computer (right click) --> properties)Run FRST. Don´t change one of the checkboxes and hit Scan. Logfiles are created on your desk... Read more

Read other 20 answers

I want to use SOAP to carry RPC messages between client and server.
Both client and server should be able to send RPC request and response to each other.
The Messages from client to server are passed using post
The messages from server to client are passed using 200 ok
Single message(POST or 200 ok) can contain multiple SOAP envelopes. Each envelope
will have one SOAP request or response.

I want to write this application on Linux using C/C++(and if needed Python).

I have explored SOAPpy and few other libraries but I think they didn't exactly match to my requirements.

Please let me know, if you know an open source library which gives web and SOAP support for above functionality?

Thanks and Regards

Read other answers

Hello and HELP!
I keep getting the above error message. Also, an Apache Tomcat error message 5.0 and 5.2 when I'm browsing.
When I'm in my email, I keep having to log back in, every time I open a message. Am not able to send messages. Keep getting logged out.
Also, when I'm in another secure site involving my work, the same thing happens. I keep having to log in over and over.
If you can help me with this so I don't have to go to a tech and spend $100, I would hugely appreciate it!

Read other answers

Ok - I'm trying to fix my friends' computer - Toshiba Satellite L455-S5975 running Windows 7 32-bit

Windows firewall is off and I need to "Update Firewall Settings". When I click use recommended settings, I get a message that says it "can't change some of your settings. Error code 0x80070424" I get the same thing when I click on "Turn Windows Firewall on or off" and "Restore Defaults"

When I click on "Advanced Settings" I get "There was an error opening the Windows Firewall with Advanced Security snap-in" followed by it "failed to load. Restart the Windows Firewall service on the computer you are managing. Error code 0x6D9."

I scanned the computer using both Avast and Microsoft Safety Scanner (full scan and took over 2 hours) - no infections or issues found

I installed all Microsoft updates and followed suggested restarts.

I ran Microsoft Fix It and I get a message that the firewall isn't running or stopped and it can't be fixed.

I have gone into services as an administrator to try and start Windows Firewall...it isn't there - not in the list of services (local)

I also used SlimDrivers to update all the drivers on the computer.

What I am not seeing is how to uninstall and reinstall Windows Firewall...any other program or hardware issue, that would seem to be the easiest solution - but I have yet to see how to do that with Windows Firewall.

I even started the computer in safe mode... Read more

A:Win7 Firewall won't turn on error code 0x6D9 and error code 0x80070424

What other Anti-virus was on the computer before Avast?

Read other 3 answers

Computer model: Panasonic Toughbook CF-31
OS: Windows 7 SP1
Processor: Intel Core i5-2540M CPU @ 2.60GHz 2.60GHz
RAM: 4 GB (3.89 GB usable)
System type: 64-bit

CBS.zip - Google Drive

I ran the SURT tool Windows6.1-KB947821-v34-x64.msu.
Ran fine, no problem.

Ran sfc /scannow
"Verification 100%"
"Windows Resource Protection could not perform the requested operation."

Also ran

I still get the "Windows Update Error, Error Code 80070643, Code 9C57"

A:Windows Update Error, Error Code 80070643, Code 9C57

Hi Qpuser,
lookin at your logs
couple of questions
Are you dual booting or have the OS on your D drive/partition.
can you also run, in following order

and sfc /scannow

copy/paste the results please.


Read other 1 answers

uuuggghhhh, can anyone tell me how to recover the computer from the InPageCoFire error with the status code of c0000185? I can only run my computer in safe mode and it's really getting me irritated!!! HELP

A:InPageCoFire error status code c0000185

That error is caused by a system file being damaged in some way. You ought to be able to repair the damage by using Windows built-in System File Checker utility:Open an elevated command prompt. To do this, click Start, type cmd . When the Instant search results are shown, right-click the cmd.exe entry and choose Run as administrator.. If you are prompted for an administrator password or for a confirmation, type the password, or click Allow.At the command prompt (a black box with white text,) type the following command, and then press ENTER: sfc /scannowWait for the SFC utility to complete, this may take some time and you may be prompted for your Windows CD or DVD.This will, with any luck, find and fix the broken file.

Read other 1 answers

well let's get straight to the point. i had windows xp with a beta version of service pack 2 installed, found out i had the w32 welchia virus and i just couldn't get rid of it, my antivirus (norton) would detect and delete it everytime i disabled my norton internet security.

so, after i did a few scans with a few different removal program (usually they found something and deleted it, sometimes they didn't), but it was still there. so i decided to try the microsoft security update, but since i had SP beta 2 i couldn't install SP1 security update. so i removed sp2. every since then i've been getting this status code error:
c:\windows\system32/lsass.exe caused status code 1073741819
so, i did some searches on the web and found this site:

it says NOTE: You can use Ldp.exe or Adsiedit.exe to change the replInterval value

i guess i have to change that value to get it working properly, but i don't have ldp.exe or adsiedit.exe and don't know where to get them.
so now everytime i reboot i get this error msg and it restarts the pc. sometimes it works though, which is how i'm on now. i left it on overnight and it didn't reboot the whole night... so i thought with the sp1a upgrade i fixed it, but i just got the error about 5 minutes ago.

can anyone help me fix this?
it's really annoying argg...
i hope i don't have to reinstall xp.

im running windows xp pro with sp1a

A:lsass.exe status code error, please read.

Read other 6 answers

When I try to boot my computer the Windows Boot Manager screen comes up showing:
"A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source.
File: \Windows\system32\winload.exe
Status: 0xc0000428
Info: Windows cannot verify the digital signature for this file. "

The next screen shows the option "to specify an advanced option for this choice, press F8"
When I click F8, it brings me back to the first screen and will not let me get into advanced options.

I purchased a windows 7 repair disc and have tried the following...

1. Insert the Windows 7 DVD and restart your computer
2. Boot from the DVD.
3. Choose your language and click Next.
4. Click Repair Your Computer and then select the operating system you want to repair.
5. System Recovery Options box comes up saying:
"This version of System Recovery Options is not compatible with the version of Windows you are trying to repair. Try using a recovery disc that is compatible with this version of Windows."

System Recovery Options >
Command Prompt>
bootrec /fixMBR
bootrec /fixBoot
bootrec /rebuildBCD
I am still unable to reboot my laptop properly

Read other answers

jeanchoi62 is online now Add to jeanchoi62's Reputation Report Post
Status 0xc0000428 Error code = 0x490
When I try to boot my computer the Windows Boot Manager screen comes up showing:
"A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source.
File: \Windows\system32\winload.exe
Status: 0xc0000428
Info: Windows cannot verify the digital signature for this file. "

The next screen shows the option "to specify an advanced option for this choice, press F8"
When I click F8, it brings me back to the first screen and will not let me get into advanced options.

I purchased a windows 7 repair disc and have tried the following...

1. Insert the Windows 7 DVD and restart your computer
2. Boot from the DVD.
3. Choose your language and click Next.
4. Click Repair Your Computer and then select the operating system you want to repair.
5. System Recovery Options box comes up saying:
"This version of System Recovery Options is not compatible with the version of Windows you are trying to repair. Try using a recovery disc that is compatible with this version of Windows."

System Recovery Options >
Command Prompt>
bootrec /fixMBR
bootrec /fixBoot
bootrec /rebuildBCD

System recovery options > system restore
"To use system restore, you must specify which windows installation to restore."
This https://imgur.co... Read more

Read other answers

If you wish to know how the Internet is restricted by governments, the new 451 protocol will tell you.

Governments will not always be able to disguise which content they restrict across the Web thanks to a new error code which will warn users of content restricted through censorship.

On Friday, the group responsible for Internet standards, the Internet Engineering Steering Group (IESG), approved a new HTTP code to differentiate between Web pages which cannot be shown for technical reasons and others which are unavailable for non-technical reasons, such as governmental censorship.

Status codes, available within the 100s to 500s, are most commonly encountered when something goes wrong -- such as a server downtime, for example, which prevents a user from accessing a Web page. The common 404 error tells users a page has not been found, but now 451 is coming into its own as a way to track other restrictions.

Online censorship is on the rise. Governments in the European bloc force ISPs to restrict access to websites linking to pirated content, China has its ever-famous "Great Firewall" which heavily restricts the Web, and countries including Russia and South Korea are also cracking down on access.

It isn't always easy to work out whether a Web page is down because of technical reasons or governmental meddling. However, a new Internet protocol could change that.

More: http://www.zdnet.com/article/error-4...or-censorship/

A:Error 451: The new HTTP code for censorship

Read other 0 answers

hi i am currently serving in afghanistan and into my first 2 months of my tour and my advent 4211-b netbook has broken. i tried restoring settings on it via the tech guys software installed on my netbook and it crashed half way through, so i restarted it and ever since it goes onto a blank screen saying

Windows Boot Manager
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click “Next.”
3. Click “Repair your computer.”
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: \Boot\BCD
Status: 0xc000000f
Info: An error occurred while attempting to read the boot configurations data.
Enter= Continue ESC=Exit
i have a usb stick and have tried to download windows xp recovery disks and try to re-boot it that way but nothing works! pressing enter and esc just restarts the computer and takes me straight back to this page. i need help asap. i only have a few days where i can access the internet to try and find solutions and then im back out.
my girlfriend tried to speak to "the tech guys" from pcworld and they didnt want to know, they just told her that i need to bring it which would take months for me to recieve back out here, surly there is a way for me to fix it out here isnt there?

thanks for looking hope you can help


A:advent 4211-b with error code \boot\bcd status 0xc000000f

Read other 14 answers

No-one replied to this post and so the problem was never fixed.
(The updates continued to fail downloading or installing)
I upgraded to Windows 10 Home and thankfully didn't need to have the updates installed to upgrade.

Back in April this year I downloaded two important updates:

1) Security Update for Microsoft .NET Framework 4.5.1 and 4.5.2 on Windows 8.1 and Windows Server 2012 R2 x64-based Systems (KB3023222)

2) Security Update for Microsoft .NET Framework 4.5.1 and 4.5.2 on Windows 8.1 and Windows Server 2012 R2 x64-based Systems (KB3032663)

However during the installation I encountered Error Code: 80073712
I tryed the installation again without anything else open and still the same result
I tryed the installation again having restarted and still the same result
I tryed the installation again after running the DISM Tool and still the same result

Yesterday (17/7/15) I tryed to download another important update:

1) Security Update for Windows 8.1 for x64-based Systems (KB3004365)

However during the download I encountered Error Code: 800F081F
I tryed everything that I tryed previously and still the same result

I searched around and both of these error codes apparently mean that a file needed by Windows Update is either damaged or missing

I thought I might as-well start a thread about it on these forums as not being able to download/install security updates isn't a good thing

Please Reply!

Read other answers

Hi All,
I'm new here and I think I messed up the post that I made. I had meant to say that all of a sudden I can't use windows installer service I get error code 8007641 or error code 641. I'm unsure why I'm not able to use windows installer anymore and I'm not able to get valuable updates from windows without it. Has anyone else ever had this problem and if so, were they able to come up with a solution? Thank you. This is my first day on the site and unsure how to get around on it, but it seems like it's an exciting site and I'm looking forward to using it.

A:Windows Installer, Error Code 8007641 or error code 641

DownloadmsiserverLaunch it,click YESRestart the PC and try to updateIf you still have issuesDownloadmini toolboxCheckmark following boxes: List last 10 Event Viewer log List Installed ProgramsClick Go and post the result.

Read other 2 answers

Boot configuration data file is missing some required informationFile   BCDError Code oxc000000d Any fixes for this? Computer wont start up. Worked fine this morning. Got this message this afternoon.

Go to Solution.

A:Error code oxc000000d acer aspire R14 error code o...

First of all try to check if ALT+F10 at boot take you to windows recovery and you can reach command prompt from there:troubleshoot-advanced options- command prompt (if this works, go to point 4, if not point 1)1. create a vanilla Windows 8.1 installation media from this link:http://windows.microsoft.com/en-us/windows-8/create-reset-refresh-media2. Once you boot using the Windows installation disc, on the Windows 8.x installation window, click on Repair your computer.3. Click on Troubleshoot and in the Advanced options. First thing you may try is the Automatic Repair.4. If that does not help, then select Command Prompt. Enter the following four commands into the prompt.bootrec /fixmbrbootrec /fixbootbootrec /scanosbootrec /rebuildbcdOnce the command completes, restart the computer.

Read other 3 answers

This is a desktop PC with Windows 7 Ultimate 64 bit installed. I'm trying to repair with the disk it was installed with originally. The reason for attempting the repair is that the System File Checker says there are files that it could not repair when I ran it. I ran it originally because I couldn't install or uninstall anything. I would get an error: This application was unable to start correctly. With error message (0xC0000006)

Now trying to repair Windows 7 with the upgrade option I get:
Windows was unable to create a required installation folder. Please reconfigure your boot.wim to use the flag 9 settings for the first image and restart your installation. Error Code: 0x803002f

Any help greatly appreciated....

A:Started with error code 0xC0000006 and now I have Error Code: 0x803002

You may need to attempt SFC up to 3 times to repair damaged System Files. But first disinfect per Troubleshooting Steps for Windows 7. If there is any problem go with the bootable scans in Troubleshooting Windows 7 Failure to Start as the OS may be in the death grip of infection.

Then SFC may run better from the Win7 installation media or System Repair Disk Command Line: SFC /SCANNOW Run in Command Prompt at Boot.

If these fail then you can try the Repair Install after establishing a Clean Boot per Troubleshooting Steps for Windows 7.

But you may be better off copying out your files to quarantine to follow these same steps for a perfect Clean Reinstall - Factory OEM Windows 7 which compiles everything that works best in tens of thousands of installs we've helped with here.

Read other 1 answers

I do OS image deployments for customers on multiple platforms and multiple languages on multiple OS's. I'm now begining my deployment for Windows 7 and have hit a major stumbling block.The above error happens at the end of my installation when running 'bcdboot.exe d:\windows'As far as the install goes it is a self generating HDD install system. 1. Four partitions are created #1 is the 200mb System, #2 is the OS partition, #3 is the WinPE boot partition for the image build set as active, #4 is the imaging files location.2. Upon boot of the image install the system sets partition letters for installing using diskpart.exe.3. An interview using an HTA file starts up asking Name, Language, Timezone, and location.4. Using an WMI call to the baseboard I get the SYSID so that the right driver set can be applied.5. Once the user selects Ok in the HTA interview screen the imaging is all automated. 6. The very last thing that I do before rebooting is call bcdboot s:\Windows (because is the actual driver letter at the time of the windows install, I've also tired using 'D' but it doesn't work either) then I remove the extra partitions and set the #1 partition as active then reboot.This system works fine under my windows XP install and the only real difference is the 200MB system partition. I've tried varying the sequence but it doesn't seem to matter. Any ideas?Thanks for the help,Randall Dale

A:BFSVC:BcdOpenSystemStore failed with unexpected error code, Status = [c0000098]

I do bcdboot after the image is applied. Me thinks your bcdboot is failing because wrong partition is active at the time of bcdboot.My workflow is:1. Wipe the disk2. Create 200 MB partition. Assign letter. Active. Format3. Create partition ocupying the rest of the disk (or smaller). Assign letter. Format4. ImageX. Source is network share. Destination is partition 2 (D:)5. bcdboot d:\windows6. Reboot.It works for me.

Read other 5 answers

The URL of a shared folder on the LAN,  copied into Windows Explorer address bar produces the Network Error in the above title.
Network Error: WIndows cannot access
\\server.LAN.com\MySharedFolder   Error Code: 0x8004005 - Unspecified error.
But from a Dos terminal, Windows Explorer can open the same location just fine.  From DOS terminal:

Read other answers

I have changed my graphic card (MSI N560GTX-TI) and new PSU (Corsair GS 700) and now my PC does NOT start, it gives me an error message: "error code biohd-2 warning no drives detected".
Checked the cables, SATA ports, hardware diagnose, reset CMOS, removed the motherboard battery and nothing...
My HD is a WD Caviar Green 2TB.
Help please.
Thank you very much.

A:error code biohd-2 warning no drives detected

Can you hear the drive spin up ? I can't see why what you have done would affect the drive. You say you have checked the connections. Try going into BIOS and get to the hard drive screen and see if it will detect anything, also ensure you are in AHCI mode and not IDE.

Read other 4 answers

Are these Windows 7 pre-installed multiplayer internet games no longer being serviced by Microsoft? Internet multiplayer game servers have been in a state of unresolved network error since May 1, 2017.
Consumers of MS Windows 7 are familiar with Error Code 80041004 which means a "network error" communicating with the game server is occurring and nothing is wrong with their Windows product. Network errors are only resolved by Microsoft game server
IT Technicians. This post requires a response from a high-level MS Tech who is "in-the-know" on the status of the maintenance of MS game servers.
Kindly provide a status update. Thank you.

Read other answers

I am getting this error code 5D0030009

device initilization failure unable to to access USB

I am running Windows XP on a Dell E521 PC with two gigs of RAM

I cannot get my PC to recognize and install CH products flight sim yoke or CH rudder pedals pro into Microsoft Flight Simulator X

My radio control flight sims won't recognize the flight controller USB devices either
I have no yellow question marks or exclamatin points in device manager

I have one device that is "unknown" shown under game controllers in device manager

Is there an easy fix?
Will a registry cleaner and repair program fix this and if so, which is the best?


A:error code initilization failure

Read other 6 answers

Greetings, I need help solving the error codes below. Thank you

Product: Windows Defender -- Error 1923. Service 'Windows Defender' (WinDefend) could not be installed. Verify that you have sufficient privileges to install system services.

Product: Microsoft Office Enterprise 2007 - Update 'Security Update for Microsoft Office Word 2007 (KB2251419)' could not be installed. Error code 1603. Additional information is available in the log file C:\DOCUME~1\user\LOCALS~1\Temp\MSIfb8e4.LOG.

I hope I have provide useful information to get your help.


A:Error code 1923 and Error code 1603

hi, got a questions for ya. have you uninstalled any virus protection software lately? the reason i ask it might of left remnants behind if you did not use the removal tool.

Read other 1 answers

Hi guys, first time posting so apologies in advance if I do something illegal. As far as I can gather, I should be posting in the right forum. I've been having system stability problems for the last week or so. I think it might be because of a mass driver update across my system since nothing else seems to be the cause.

Basically, I updated some drivers bout a week ago and now the PC either hangs or auto-restart when I'm playing games. At first I thought it might be due to OC instability, so I reset my bios to default settings. Didn't quite work out completely as the system still exhibits the "sudden death" during gaming.

Have tried the steps in the sticky above on refreshing the page file. defragging etc. Problem still hasn't gone away. All rams have cleared 7 cycles of memtest at 2.65 volts and 2.6 volts without problems, though everything has been reset to stock already.

My system specs are as follows :
AMD 64X2 4200+
MSI K8N Neo 4 Platinum
2 x 512mb Kingston CH5 PC3200 DDR
2 x 512mb Mushkin Black Line BH5 DDR
Inno 6600GT 128mb
Creative Audugy ZS Platinum
BenQ 1640
Gigabyte CD-RW
Hitachi/IBM 80GB SATA II
Western Digital 240GB SATA HD
Verudium Vortex 430W

Am fairly sure its not a power issue and the core temp never exceeds 49 degrees even at full load. Its about 44/45 idle. Am guessing it might be the soundcard though... Anyone able to help?

Would be most grateful for any assistance and thanks in advance.
... Read more

A:system error code Error code 100000d1

Looks like NV4mini.sys is the Nvidia faulting driver... Your Inno 6800GT drivers are at fault

Read other 4 answers

My computer boots just fine - although, perhaps, twice, it had booted and the opening screens were NOT what I expected. Then, I simply re-booted. Following that, I pressed ESC during boot and selected Diagnostic and this is what was displayed: Testing CPU: CPU Test - Passed. Hard Drive Connection Test - Passed. Boot Test - Failed. Error Code - BIOHD3, Warning - No Active partitions. Whoever undertands what the diagnostics found, please explain if there's anything I (or anyone) can do. I'm sort of on pins and needles, because, I feel there's a catastrophe waiting to happen.

Read other answers

Recently, my computer got infected with a virus, so I booted in safe mode, ran Malywarebytes to get ride of it. I repeatably went into safe mode, scan, log into windows to see of the virus was still there

When it seemed that I finally got ride of the virus in safe mode, I rebooted and received this error message

***STOP 0x0000007B (0XB84C7524, 0x000000E, 0X00000000)

I know 0x0000007B means a boot issue, but I have no idea what those numbers afterwards are.

If someone could point me in the right direction of what this error message means, since I don't want to guess and check, I would be grateful.

A:Meaning of Error Code on failure to boot up

That should help you out a little. Honestly if you just removed a virus I'd say a system critical file may have been altered or deleted. Try using your OS CD to run a repair install, GL.

Read other 4 answers

While sending emails to an address within hotmail on a custom domain, I'm receiving the response below intermittently. Emails sent do not contain attachments nor is the recipient's inbox near any "limit" ("outlook 'grows' with my needs").
I've recently archived all the email messages which were in the inbox. No change.

This is an automatically generated Delivery Status Notification.

Delivery to the following recipients failed.

       email address at custom domain

Final-Recipient: rfc822;email address at custom domain
Action: failed
Status: 5.2.2
Diagnostic-Code: smtp;552 5.2.2 This message is larger than the current system limit or the recipient's mailbox is full. Create a shorter message body or remove attachments and try sending it again.

Where is the problem?


Read other answers

Hi..Recently I have noticed that when I watch YouTube videos. My laptop goes into error. It shows video tdr failure. And also nvlddmkm.sys ... Can I have help with this? My graphics card is Nvidia geforce 420m...Help pls. I'm using windows 10.

A:video tdr failure or nvlddmkm.sys error code

Nvidia ge force GT 420 m*

Read other 1 answers

Hi Microsoft,
I was not able to connect my reliance Pro dongle (DATA CARD) on my computer which shows as " The error code returned on failure is 720" and the same is working on other systems. Just want to know how to fix this issue? Can you please help me out.

Error code returned on failure is 720

Read other answers

First post, thanks in advance for any help.


IE 10 update fails to install.

What I've done so far:

Updated all drivers for everything under device manager
Windows fixit program to no avail
Ran selective startup thru msconfig and attempted install to no avail
Installed SURT
Ran sfc /scannow

CBS.zip file attached, I think that's everything from the post instructions.

Thanks again!

A:IE 10 install failure - Error code 9C57

Hello and welcome johnss I saw the previous post back in March where the OP had to do a clean install again.

But I guess that isn't an option for you so is it just an update for the IE10 or the IE10 itself?

Read other 9 answers

Hello I was wondering if anyone could help me or if anyone has similar issues?

I've been plagued with random restarts from error code 41 - kernel power failure for weeks.

Please don't send me off to the microsoft knowledgebase, that doesn't tell me Jack! especially with the bug check code of "0"

I tried reinstalling windows no joy, so it had to be my PSU right? Even though my 2-3 year old Corsair HX850W with it's 7 year warranty (guess what, I can't find the receipt!) is supposed to be bullet proof. So, new PSU purchased. An Antec Earthwatts 650w. Still the same problem.

I checked the RAM, 4X 2GB sticks, one by one, they all failed on Test 7 of Memtest 86. As did two brand new sticks. A google revealed that that version of Memtest fails on Test 7 regardless. I tried the latest version of Memtest 86+ and all the sticks passed.

I checked all 3 hard drives with Seatools - all 3 were fine.

I've reinstalled windows 7 64 bit Professional yet again and decided not to install any updates.

I installed the latest graphics card driver for my ATI Radeon HD5700 card. That insisted on installing the .net4 framework as well. I restarted and within minutes the computer restarted. It has now randomly locked up.

Linux Mint seems to be working ok. I ran prime 95 on it which was going well but the computer did lock up when it went to the screen saver. I'll give it a try again later on. Otherwise, Mint was fine being left on over night, whereas Windows will shutd... Read more

A:Error Code 41 - Kernel Power Failure

Does your computer turn its self off? or just freeze? Causing the Kernal Power Error?.

Read other 9 answers

Concerning;Title;Windows XP Service Pack 3 (KB936929)Originated;Update History Installation Failure Error Code: 0x80200010 Starting with;Download does not start after you accept the EULA on the Windows Update Web siteI followed instruction to register the files;To resolve this problem, you must reregister the following files:? Msscript.ocx ? Dispex.dll ? Vbscript.dll ? Scrrun.dll by entering >start>run>regsvr32 msscript.ocx,This resulted in a completion or success message, I'm not sure wether this was a register or re-register, . . however please can anyone tell me what I am suppose to do next, as per ;http://support.microsoft.com/kb/836936/en-us4. Click Start, click Control Panel, click Appearance and Themes, click Folder Options, and then click the File Types tab. 5. In the Registered File Types list, click the JS extension, click Advanced, and then click Edit. 6. In the Application to perform action box, type the following command depending on your operating system.? For Microsoft Windows XP, type: C:\WINDOWS\System32\WScript.exe "%1" %* In 5 I did not find the JS extension, ????I did find JSScript Script File, . . . . Is this the same one ????If so does this action apply to all four files, (above) ???

A:Sp 3 Installation Failure Error Code: 0x80200010

I found this; Rename (or just delete) the SoftwareDistribution folder and see if it helps. You can use the procedure described here: http://v5.windowsupdate.microsoft.com/v5co...id=21&ln=en Note that a side effect of renaming or deleting the SoftwareDistribution folder is that you lose your Windows Update History listing (not critical). (later on, you can just delete the renamed SoftwareDistribution folder) http://www.eggheadcafe.com/forumarchives/w...ost24597399.aspBut can not make it out, and can not see the relationship with the, Microsoft Online Assisted Support ?Anyone who can co-relate this in explanation I will be glad to hear from !

Read other 3 answers

i can't update IE on several machines (some desktop pc's, some notebooks. different images, but all Win7SP1, 64bit) the IE 10 or IE 11 from IE 9.
we dont have internet on our production LAN, so i want to update via internal WSUS..like other pc's and notebooks in our LAN worked with success.
then i tried with offline installer...also both...IE 10 and IE 11, same failure.
i tried many things:
- uninstall products via FORFILES /P Command and install IE afterwards
- uninstall preReq Updates and install again
- install via Online-Update (Internet)
all done with real PC or a virtuell PC-Image, so i could try the things from begin on new checkpoint.
Done with Local Administrator and Domain-Administrator
i dont know what to do anymore.....
Last thing i tried: reboot - Run KB947821 - reboot - run again, took about 2 hours - reboot - try to run IE install with WSUS

Thanks for help

A:IE 10 or 11 Update Failure with Error Code 9C59

so sad...i hoped somebody had a bit time for my problem...i really dont know how to solve this...

Read other 2 answers


I keep getting disk boot failure error code Boihd-4. I think it happened because I accidently pressed a wrong button. Formatting the hard drive. I hit continue instead of back. Now the computer keeps asking me to put the system disk in. I keep going back to the page were I made the mistake of pushing the wrong button. before all that happened my computer turned it self off an started looping. Is there anyway to fix this without reformatting my computer. (with Windows Vista 32bit Are there programs that will allow me to download all my files that have.(movies video audio etc.) I have another computer with windows 7.

Read other answers

Hi, When i am trying to record and web application which is launched on Sharepoint i have below scriptweb_custom_request("ProcessQuery",         "URL=http://vc1cgr01cgi006:9090/_vti_bin/client.svc/ProcessQuery",         "Method=POST",         "Resource=0",         "RecContentType=application/json",         "Referer=http://vc1cgr01cgi006:9090/Lists/DSPortalBase/Home.aspx#",         "Snapshot=t2.inf",         "Mode=HTML",         "EncType=text/xml",         "Body=<Request xmlns=\"http://schemas.microsoft.com/sharepoint/clientquery/2009\" SchemaVersion=\"\" LibraryVersion=\"\" ApplicationName=\"Javascript Library\"><Actions><Query Id=\"23\" ObjectPathId=\"2\"><Query SelectAllProperties=\"true\"><Properties /></Query></Query><Query Id=\"24\" ObjectPathId=\"5\"><Query SelectAllProperties=\"true\"><Properties /></Query></Query></Actions><ObjectPaths><Property Id=\"2\" ParentId=\"0\" Name=\"Site\" /><Property Id=\"5\" ParentId=\"... Read more

A:HTTP Status-Code=403 (FORBIDDEN) for "http://vc1cgr01cgi006:...

hi ! Same problem here, have you find a solution?

Read other 6 answers

I am running Windows 7 Home Premium, Service Pack 1, 64-bit Operating System. My issue is that last night I received 8 important updates though Windows Update to install (Windows Update is set to download updates but let me choose when to install them). When I installed them, only 6 were installed. Two of them, Security Update for Windows 7 for x64-based Systems (KB3088195) and Security Update for Windows 7 for x64-based Systems (KB3097966), will not install. I have repeatedly tried to dl and install them through Windows Update and both of them fail, with "Error code 80073712".
When this batch of 8 updates showed up last night, I downloaded all of them and Windows Update only showed it was downloading 6 of them. These last two (KB3088195 & KB3097966) will not download. However, they sit in Windows Update as "2 important updates are available". Windows does not keep trying on its own to download them though, neither at shut down nor does it remind me that I have these 2 updates available to download. They just sit in Windows Update as  "2 important updates are available".
I have tried to figure this out for a few hours, but I am not the most computer savvy person. Help would be greatly appreciated.

A:Failure to download updates & Error Code 80073712.

Welcome to Bleeping Computer.
Download and run the Windows Update Readiness Tool.
Let us know how it goes.

Read other 9 answers

When i try installing Kernel-Mode Driver Framework version 1.11 update for Windows 7 it always fails and gives me an error 8007007e and i honestly dont know what to do. I've been googling aroudn the internet and everything either didn't work or didn't make sense to me and i'm not a tech geek or even near that, so i really need some help.

i am unable to upload my cbs.zip aswell because it exceeds the max mb.

Update for Kernel-Mode Driver Framework version 1.11 for Windows 7 for x64-based Systems (KB2685811)

Installation date: ‎25/‎03/‎2013 7:40 PM

Installation status: Failed

Error details: Code 8007007E

Update type: Recommended

Install this update to resolve issues in Windows. For a complete listing of the issues that are included in this update, see the associated Microsoft Knowledge Base article for more information. After you install this item, you may have to restart your computer.2685811

A:Windows update failure error code 8007007e

SFC /SCANNOW Command - System File Checker option two. Any integrity errors?
Open the Windows Update troubleshooter

What is the System Update Readiness Tool?
Post file %SYSTEMROOT%\Logs\CBS\CheckSUR.log afterwards

Read other 8 answers

I have been having some trouble with Windows update recently. My CheckSUR.log file says I'm missing 146 CSI Payload Files

I've attached both CBS and CheckSUR log files. Thanks for any help offered!

A:Windows update failure - error code 80073712

Here's the summary from your CheckSUR.log file...

Seconds executed: 889
Found 146 errors
CSI Payload File Missing Total count: 146
This tome indicates that something serious interfered at the crucial time of an update install where the files were being relocated after a reboot - especially as SFC appears to find nothing amiss.

I'll post a fix protocol for the above errors later - but I wouldn't hold out too much hope of its being effective.

Read other 9 answers

I recently switched back to a pc after owning a mac for a couple years and I noticed after 3 weeks of owning it that it had never asked me to install any updates, so i went into windows update and it says it has never been updated. So i click search for updates and it gives me Errors found:Code 800F0900. I have used a registry cleaner (CCleaner), ive installed the system update readiness tool (Feb. 2013 x64), and I've run the microsoft fix it tool. absolutely nothing works. any help is appreciated!
specs are:
Alienware M14X R2
Intel i7 3630QM
16GB memory
750 HDD+ 32GB SSD (the OS is installed on the HDD)

A:ERROR CODE 800F0900 windows update failure

Are you getting that error for every updates or when installing a specific update ? . Before trying any repair attempts,  uninstall your antivirus software and see if it helps. You can re install it later. 
If that didn't solve the issue, please follow the below steps.
1 ) Make sure Date, time and region settings are correct.
     Make sure your WIndows 7 is SP1 installed. If not download and run the SP1 offline setup.
2 )If all areOK download 'Windows Repair ALL in One' from  http://www.tweaking.com/content/page/windows_repair_all_in_one.html
3) Install and open the tool. Click next to continue. Go to Step 3 and click on the Do it button to run System File Check.
4 ) Go to Step 4 and click on the Create button under System Restore.

5 ) Go to Start Repairs and click on the Start button.

6 ) If it asks permission to backup registry, allow it to do so. Now you will see the main screen.
Click 'Unselect All' to remove default selection. Now select the following items.
 Register system files
 Set Windows services to default start up
 Repair windows Update
 Repair Windows Firewall
Now click the start button and repair will start. It may take sometime to finish. If it asks for permission to restart, allow it to d... Read more

Read other 16 answers

I have searched for 3 days for an answer to this problem. I have talked to folks at HP, Tiger Direct, Geek Squad, you name it everyone agreed at first, now I get different answers!!!!! So I come to you.
I have a HP Pavilion dv6324us notebook bought in late 07 with Vista Home Premium, last week I got an imminent hard drive failure, but before I could do anything it just croaked. I had not produced the recovery DVDs. I checked the bios and could not run the HDD test, the answer was no ide detected, also the only boot option was for the DVD drive, no hard drive showed up, (this was the point everyone agreed on, the Hard drive was dead and not being recognized by the system). I bought a new hard drive from Tigerdirect and bought a recovery DVD from HP. I installed the new Seagate Momentous 120 SATA, inserted the recovery CD and things started to happen, Ahhh Bliss, as soon as I click the yes button to install the works WHAM a box with
ERROR CODE 100a if this code persists contact HP. I did, now they think the hard drive is OK, it's the mother board thats bad, or the connector, or the software. I hooked up a usb Drive to see if it reads in the bios and it does. ONE thing I do notice is the new hard drive does not get seen by the bios, so could it be the mother board or the connector? I would really appreciate any help that can be given, I don't want to keep throwing good money after bad, but even better would be to finally get an answer. Thanks

A:Hard Drive Failure and an error 100a code

Hi gw122, welcome to the board.

Sounds like either bad SATA cable, bad connection or port. Have you try a different post? Also, replace SATA cable. Other possibility is your PSU went unstable which causing mb damage. PSUs in all big computer manufacturers are questionable in quality. So HP may be right about the mb is being bad.

Hope this helps.


Read other 12 answers

I've exhausted my ability to try to solve this one on my own. I've run all of the automated fixes I can find from Microsoft, so I'm asking for some more targeted help.

I'm running Windows 7 Pro x64 SP1. I have run the System Update Readiness Tool (May '14). It completes successfully, but I don't know what it actually accomplishes because it doesn't make things better as far as I can tell.

Here is my windows update screenshot:
Attachment 330898

Here is what I see when I try to run SFC:
Attachment 330899

Here's my CBS zip file:
Attachment 330900

Thanks in advance for the help. Let me know if there is more info you guys need from me.

A:Windows Update Failure, Error Code 80070002

Hi, Welcome to SF.

Try this,

Windows Update error 80070002 - Windows Help

Read other 9 answers

After a reset of my laptop, Windows isn't activating.   I'm getting the error 0xC004C003: The activation server determined the specified product key has been blocked.  I talked to Microsoft support; the first person dircted me to activate Windows by phone (which didn't work), and the second told me to contact the maker of my laptop (HP).  Judging by other forum posts regarding this subject, HP needs to give me a new Windows product key.   Any and all help would be appreciated - I'm hyped for Windows 10 and I don't want that unactivated when I upgrade.

A:Windows 8 Activation Failure - Error Code 0xC004C003

Hi Please find the link given below might help ou to fix your issue. https://support.microsoft.com/en-us/kb/978305

Read other 4 answers